www.deltaww.com
Delta Robot Controller with Servo Drive Integrated ASDA-MS Series
Automation for a Changing World
1
Introduction Delta is a leading industrial automation brand that continues to provide automated solutions for a wide range of applications and industries to fulfill customers' demands. Since industrial robots are considered extremely important fundamental products for industrial automation, Delta's industrial robot solution combines key products including controllers, AC servo drives, high-speed motion communication and a general communication interface into a real-time and highly flexible Robot Controller with Servo Drive Integrated ASDA-MS Series.
Innovative and Integrated DesignThe ASDA-MS Series integrates a robot controller and 4 axes of servo drives to perform mathematical calculations, smooth track planning, and provide loop control in one unit, greatly enhancing real-time system calculation performance. This design perfectly fulfills the demands of an industrial robots' complex non-linear system and realizes dynamic compensation to achieve high-speed and high precision.
Complete Development PlatformThe ASDA-MS Series also supports the IEC61131-3 standard's five kinds of programming language and PLCopen motion function block. It offers Delta Robot Languages (DRL) for robot application program development, so that customers can develop customized functions and programs for applications in various industries. In addition, the Series integrates peripheral devices (such as machine vision systems, sensors, and central computers) through various communication interfaces, and matches extension axes via high-speed motion BUS such as MODBUS and MODBUS TCP to build a complete industrial robot solution.
In the competitive global market of industrial robots, Delta offers total professional industrial robot solutions to fulfill all kinds of market requirements and assist customers in improving their competitiveness and enhancing customization to provide "Automation for a Changing World".
2
Introduction
System Configuration
Product Features
DRAS Software Features
Successful Applications
Ordering Information
Product Line-up
Specifications
Exterior of the Robot Controller
Servo Motor Dimensions and Specifications
Handheld Type HMI DOP-H Series
Optional Cable and Connectors
Table of Contents
1
3
4
8
12
15
16
17
18
19
23
25
3
System Configuration
Complete Robot Solution ■ Integrates robot controller, motion controller and
servo drive in one single unit with high flexibility and reliability
■ Supports communication protocols for fast and smooth integration with peripheral devices
■ Built-in diverse robot control modules for different applications
■ Enhanced flexibility and extension with 4-axis robot and 6 external axes motion control
■ Supports IEC 61131-3 standard for five kinds of programming languages and PLCopen motion function block
■ Offers DRL Languages for developing robot application programs to fulfill customer demand for developing specific skill functions
■ Supports G-code programming for path planning
PC Software with User-Friendly Tools ■ IEC 61131-3 PLC programming ■ DRL programming ■ Diverse industrial robot setups ■ Intelligent robot calibration ■ Real-time monitoring oscilloscope ■ Industrial robot operating tools
PAD
DELTA Robot
SCARA Robot
RobotPC Software
ASDA-A2-F
ASDA-MS
ASDA-M-F
Ethernet
DMCNET
External Axes
Users
Handheld TypeHMIDOP-H
4
Product FeaturesElectrical Control System Configuration The system combines the handheld type HMI, robot controller MS Series and 4 AC servo motors. The ASDA-MS Series integrates motion controller, robot controller and 4 servo drives in one single unit to speed up data exchange efficiency of communication, enhance system control performance and dynamically compensate non-linear terms that affect robot motion during robot moving processes. This integration into one unit satisfies high speed and high precision requirements of robot or motion control applications.
PAD
SCARA Robot
ROBOTPC Software
ASDA-MS
Ethernet
Users
Handheld Type HMIDOP-H
Control Structure
5
Communication Networks for Integrated System Configuration The ASDA-MS Series provides communication protocols including Ethernet, RS-485/232 for fast integration with peripheral devices such as PLC, conveyor, DMV and other conveyor lines. In addition, the Series offers a complete solution for information exchange with a central monitoring PC.
Diverse Robot Control The ASDA-MS Series supports 4-axis SCARA robots, DELTA and Linear DELTA robots with different built-in robot modules for customers to quickly implement their required functions on their applications via basic robot parameters with a corresponding algorithm for high flexibility and convenience.
PAD
SCARA Robot
ROBOTPC Software
PC(Central Monitoring)
ASDA-MS
Ethernet
Ethernet
Handheld Type HMIDOP-H
Conveyor Machine Vision System (DMV)
Programmable Logic Controller (PLC)
ASDA-MS
DELTA Robot
SCARA Robot
6
Comprehensive Development PlatformCustomers can apply Delta's DRAS (Delta Robot Automation Studio) which supports the IEC 61131-3standard for five kinds of programming languages, PLCopen motion function block and DRL (DELTA Robot Language) for developing customized robot application programs to ensure the uniqueness and completeness of individual systems.
7
Advanced Motion Control FunctionThe ASDA-MS Series provide advanced motion control functions including robot motion commands: point to point, linear and arc. It also supports G-code standard command for CNC and other applications. The Series provides the best solution and can solve customers' problems with a built-in optimized path control function, for handling handle small path errors, offering fixed feed rate and reducing path planning inaccuracy.
G0 X0G0 X300G1 X700G1 X1000G1 X0G1 3000
Y0 Y300 Y700Y1000Y0Y4000
Z0 Z500 Z700Z1000Z0Z5000
G-code
PC downloads G-Code DOP-H downloads G-Code
DELTA Robot
SCARA Robot
8
Customers can apply DRAS Software with IEC 61131-3 standard for five kinds of programming languages, PLCopen motion function block and DRL languages for developing customized robot application programs to ensure the uniqueness and completeness of individual systems.
IEC 61131-3 PLC Programming Supports IEC 61131-3 standard for five kinds of programming languages and PLCopen motion function block
■ LD - Ladder Diagram
■ FBD – Function Block Diagram
■ SFC – Sequential Function Chart
■ IL- Instruction List
■ ST – Structured Text
Provides customers with programming tools to execute techniques and functions for their applications.
DRL ProgrammingDRL can assist customers with a programming development base on industry applications to control industrial robots and data exchange between peripheral devices.
DRAS Software (Delta Robot Automation Studio)
9
Support Diverse Industrial RobotsDRAS intuitive interface design enables customers to adjust parameters and quickly adjust gear ratio, reduction ratio, limit value and deviation of robot arm for easier and simple operating procedures.
10
Intelligent Robot CalibrationFocuses on calibrating errors of the actual device assembly. Customers can operate the system base on calibration procedure, which will automatically correct the parameters of devices to match the actual size and deviation of the device assembly.
Real-time Monitoring Oscilloscope Assists customers in monitoring real-time information and the status of the robot arm motion process, including path planning operation, real-time analysis of system condition and motor controlled parameters such as position, speed and current of each axis during the motion process for optimized parameter adjustment.
11
Robot Teaching FunctionCustomers can operate and instantly record different coordination types, such as geodetic coordinates, user coordinates and work coordinates for precise robot positioning.
Dynamic TuningProvides a convenient dynamic tuning function to adjust parameters of each axis for system optimization.
12
Successful ApplicationsRobotic Soldering Solutions
■ Robot controller with servo drive integrated for space-saving and simple wiring
■ Use soldering software to export PCB CAD files of solder holes for robot controller to control SCARA in achieving soldering with high speed
■ Auto calibration for correcting deviation when changing soldering tools to achieve precision soldering
■ Total solution adopts Delta industrial automation products for easy integration and maintenance
Automatic Screw-Driving Solution ■ Robot controller with servo drive integrated for space-saving and easy wiring
■ SCARA delivers consistent quality with high repeatability
■ Flexible robot teaching movement and motion control for interchangeable production
■ Total solution adopts Delta industrial automation products for easy integration and maintenance
I/O
Robot Controller
I/O
Input positions of solder holes on PCB boards
Integrates four servo drives in one single unit for space-saving
Robot Controller
SCARA Robot
Electric Screwdriver
SCARA Robot
Teaching Pendant
Teaching Pendant
13
Successful Applications
■ SCARA provides fixture-less conveyor tracking with precise glue dispensing
■ Synchronizes robot movement to handle workpieces without stopping conveyor for enhanced production efficiency
■ Customer-driven PC software offers flexible adjustment and assists users re-design and self-develop for customized applications
■ General communication interface easily connects different machine vision systems and modules
■ Simple system configuration to perform glue dispensing during conveyance
■ Total solution adopts Delta industrial automation products for easy integration and maintenance
Machine Vision System
Robot Controller
RS232
Teaching Pendant
SCARA Robot
Photoelectric Sensor
Conveyor Tracking and Glue Dispensing Solution
14
RS232
■ Robot controller with servo drive integrated for space-saving and easy wiring
■ Combines flexible robot movement with machine vision system for quick inspection of multi-products production
■ Simplified system with high reliability and simple wiring configuration via MODBUS communication structure
■ Links to MES System for optimized manufacturing and interchangeable production
■ Total solution adopts Delta industrial automation products for easy integration and maintenance
Machine Vision System
Five-side Appearance Inspection Result
Teaching Pendant
SCARA Robot
Robot Controller
Five-side Appearance Inspection of Finished Goods Solution
■ Simplified system with high reliability and simple wiring configuration via MODBUS communication structure
15
Ordering Information ► ASDA-MS Series Controller
► ECMA Series Servo Motors
► ECMC Series Servo Motors
ASD - MS - 0721 - FMS Series Communication
F : DMCNET
ECM C - C W 06 02 R SShaft Diameter TypeS:Standard Shaft Diameter
Driving TypeC : AC Servo Motor
Rated Output Power01:100 W 02:200 W
Encoder TypeW : Absolute Encoder
Single Turn Resolution:22-bit
Multi-Turn Resolution:16-bit
Motor Frame Size04:40 mm 06:60 mm 08:80 mm
Series Rated Voltage / Rated SpeedC : 220 V / 3000 r/min
Servo Motor Model
Servo Motor Model
04:400 W07:750 W
ECM A - C 1 06 02 E SShaft Diameter TypeS : Standard Shaft DiameterH : Specific Shaft Diameter / High Inertia Model7 : Special Shaft Diameter
Driving TypeA : AC Servo Motor
Product NameECM : Electrical Commutation Motor
Encoder Type1 : Incremental encoder, 20-bit 2 : Incremental encoder, 17-bit A : Absolute Encoder Single Turn Resolution : 17-bit Multi-Turn Resolution : 16-bit
Series Rated Voltage / Rated SpeedC : 220V / 3000r/min F : 220V / 1500r/minE : 220V / 2000r/min G : 220V / 1000r/min
Shaft Type andOil Seal
W/OBrake
W/O OilSeal
WithBrake
W/O OilSeal
W/OBrakeWith
Oil Seal
WithBrakeWith
Oil Seal
Round Shaft(with screw hole) - - C D
Keyway E F - -
Keyway (with screw hole) P Q R S
Shaft Type andOil Seal
W/OBrake
W/O OilSeal
WithBrake
W/O OilSeal
W/OBrakeWith
Oil Seal
WithBrakeWith
Oil Seal
Round Shaft(with screw hole) - - - -
Keyway - - - -
Keyway (with screw hole) - - R S
Motor Frame Size04:40mm06:60mm08:80mm
09:86mm10:100mm
13:130mm18:180mm
Rated Output Power, Input Voltage and Phase0721 : 750W ; 220V 1-phase / 3-phase1523 : 1.5kW ; 220V 3-phase
Product NameECM : Electrical Commutation Motor
Rated Output Power0F:50 W01:100W02:200W
06:600W07:750W09:900W
10:1kW13:1.3 kW15:1.5 kW
03:300W04:400W05:500W
16
Product Line-up ASDA-MS Model
NameRated output power (kW) Rated voltage (V) Rated speed (RPM) Servo Motor Model Name Shaft Diameter Note
ASD-MS-0721-F
50 200V 3000 RPM ECMA-C1040F □ S 8mm
100 200V 3000 RPM ECMA-C △ 0401 □ S 8mm
100 200V 3000 RPM ECMC-CW0401 □ S 8mm Absolute type encoder (single turn resolution: 22bit / multi-turn resolution: 16 bit)
200 200V 3000 RPM ECMA-C △ 0602 □ S 14mm
200 200V 3000 RPM ECMC-CW0602 □ S 14mm Absolute type encoder (single turn resolution: 22bit / multi-turn resolution: 16 bit)
300 200V 1000 RPM ECMA-G △ 1303 □ S 22mm
400 200V 3000 RPM ECMA-C △ 0604 □ S 14mm
400 200V 3000 RPM ECMC-CW0604 □ S 14mm Absolute type encoder (single turn resolution: 22bit / multi-turn resolution: 16 bit)
400 200V 3000 RPM ECMA-C △ 0604 □ H 14mm High inertia400 200V 3000 RPM ECMA-C △ 0804 □ 7 14mm
500 200V 2000 RPM ECMA-E △ 1305 □ S 22mm
600 200V 1000 RPM ECMA-G △ 1306 □ S 22mm
750 200V 3000 RPM ECMA-C △ 0807 □ S 19mm
750 200V 3000 RPM ECMC-CW0807 □ S 19mm Absolute type encoder (single turn resolution: 22bit / multi-turn resolution: 16 bit)
750 200V 3000 RPM ECMA-C △ 0807 □ H 19mm High inertia750 200V 3000 RPM ECMA-C △ 0907 □ S 16mm
ASD-MS-1523-F
750 200V 3000 RPM ECMA-C △ 0807 □ H 19mm High inertia750 200V 3000 RPM ECMA-C △ 0907 □ S 16mm
850 200V 1500 RPM ECMA-F △ 1308 □ S 22mm
900 200V 1500 RPM ECMA-F △ 1309 □ S 22mm
900 200V 1000 RPM ECMA-G △ 1309 □ S 22mm
1000 200V 3000 RPM ECMA-C △ 0810 □ S 19mm
1000 200V 3000 RPM ECMA-C △ 0910 □ S 16mm
1000 200V 3000 RPM ECMA-C △ 1010 □ S 22mm
1000 200V 2000 RPM ECMA-E △ 1310 □ S 22mm
1500 200V 2000 RPM ECMA-E △ 1315 □ S 22mm
1500 200V 2000 RPM ECMA-E △ 1815 □ S 35mm 註: *1. The boxes ( △ ) in the model names represent encoder type. ( △ =1: Incremental encoder, 20-bit ; △ =2: Incremental encoder, 17-bit) *2. The boxes ( □ ) in the model names represent shaft end/brake or the number of oil seals.
Servo Drive and Servo Motor Combinations
Servo Drive and Servo Motor Combinations Example
750W Servo DriveASD-MS-0721-
1.5kW Servo DriveASD-MS-1523-
Rated Output Power : 100W200W400W750W
Rated Output Power : 750W1kW
1.5kW
Rated Output Power : 750W1kW
1.5kW
Rated Output Power : 750W1kW
1.5kW
Rated Output Power : 100W200W400W750W
Rated Output Power : 100W200W400W750W
Stand-alone Servo Motor's MaximumRated Output Power is 750W
Stand-alone Servo Motor's MaximumRated Output Power is 1.5kW
Servo Drive
Servo Drive
Combine with Servo Motor
Combine with Servo Motor
750W Servo Drive
750W 750W 750W
750W Servo Drive
100W 400W 750W
1.5kW Servo Drive
1.5kW 1.5kW 1.5kW
1.5kW Servo Drive
750W 1kW 1.5kW
10:1kW13:1.3 kW15:1.5 kW
17
ASDA-MS SpecificationsASDA-MS Series
750W (for 4 axes of control) 1.5kW (for 4 axes of control)
07 15
PowerSupply
Phase / Voltage Three-phase / Single-phase 220VAC 3-phase 220VAC
Permissible Voltage Range 1-phase / 3-phase 200 ~ 230VAC, -15% ~ 10% 3-phase 200 ~ 230VAC, -15% ~ 10%
Control of Main Circuit 24VDC,-10%~10%
Input Current (3PH) (Units: Arms)
12.4 24.8
Input Current(1PH) (Units: Arms)
23.8 44.5
Continuous Output Current (Units: Arms)
5.1 (for each axis) 8.3 (for each axis)
Dimensions (W) x (H) x (D) mm / Weight 175 mm x 300 mm x 159 mm / 5.6 Kg
Cooling System Fan Cooling
Encoder Resolution / Feedback Resolution 20-bit (1280000 p/rev)
Control of Main Circuit SVPWM (Space Vector Pulse Width Modulation) Control
Tuning Modes Auto / Manual
Regenerative Resistor Built-in
Robot Control
Programming Languages IEC61131-3 PLC Language、Delta Robot Language
Motion Control Mode PTP (Point to Point) Motion、Linear Interpolation、Circular interpolation
Memory Capacity
20MByte for User Program and Data Memory 16KByte for PLC SV/DV Variables (Not Retained)
60KByte for PLC DH Variables (Retained)1K Points for Global Use
Maximum 32K Points for Every User Program
Input / OutputStandard I/O User I/O:Input:24,Output:12
System I/O:Input:8,Output:8
Brake Output Output:4
Communication Interfaces
Ethernet 1 Channel
RS-232 / RS-485 1 Port (One port can switch two communication function)
DMCNET 1 Channel
USB Host 1 Port
Environment
Installation Site Indoor location (free from direct sunlight), no corrosive liquid and gas(far away from oil mist, flammable gas, dust)
Altitude Altitude 1000m or lower above sea level
Atmospheric Pressure 86 kPa ~ 106 kPa
Operating Temperature *2
Combination of Motors Maximum Operating Temperature Limit Combination of Motors Maximum Operating
Temperature Limit
750 W × 4 40 ºC 1.5 kW × 4 30 ºC
750 W × 2400 W × 2 45 ºC 1.5 kW × 2
750 W × 2 35 ºC
400 W × 4 50 ºC 750 W × 4 40 ºC
400 W × 2200 W × 2 55 ºC 750 W × 2
400 W × 2 45 ºC
Storage Temperature -20 ºC ~ 65 ºC
Humidity 0 ~ 90% RH (non-condensing)
Vibration 9.80665 m/s2 (1G) less than 20 Hz, 5.88 m/s2 (0.6G) 20 to 50 Hz
IP Rating IP20
Power System TN System*1
ApprovalsIEC/EN 61800-5-1, UL 508C, RCM
註: *1. TN system: A power distribution system having one point directly earthed, the exposed conductive parts of the installation being connected to that point by a protective earth conductor. *2. Operating temperature: Please apply this robot controller base on the power output and under appropriate ambient temperature to avoid extreme heat for normal operation.
18
Unit: mm (inch) Weight: 5.6 kg
175.2(6.8328)
300.
8(11
.731
2)
159.25(6.2108)
80(3
.12)
5.5(0.217)
Screw:M4*0.7Torgue:14 kgf-cm
Ø
Exterior of the Robot Controller Teaching Pendant Connection PortUsed to connect the teaching pendant
Serial Communication PortFor MODBUS communication control, supporting RS-485 / RS-232 serialcommunication.
High-speed Communication Port (Ethernet) / USB Connection Port (USB1, USB2) / DMCNET Connection Port (DMCNET)• Ethernet: Used to connect PCs or notebooks, capable of accessing data through DROE software.
• USB1, USB2: Direct connectivity to USB flash drives
• DMCNET: Used to connect DMCNET peripherals
LED Display
The 5 digit, 7 segment LED displays the controller status or fault codes.
Main Circuit Terminal (R, S, T)Used to connect 200 ~ 230Vac, 50/60Hz commercial power supply.
Servo Motor Output (U, V, W)Used to connect servo motors. Never connect the output terminal to main circuit power as the drive may be damaged beyond repair if incorrect cables are connected to the output terminals.
Motor Brake Output Terminal(BRK. DIO)
Standard I/O Terminal (STD. DIO)
System I/O Terminal (SYS. DIO)
STO I/O Terminal(Safe Torque Off)Used to connect a certified safety relay or switch for controlling STO I/O signals.
Full-Closed Loop Control Interface (EXT. ENG)Used to connect linear scale and encoder. Feeds back the position signals of the full closed linear scale and encoder for controlling A, B, Z phase signals.
Control Circuit Terminal Used to connect DC24V power supply.
Ground TerminalUsed to connect grounding wire of power supply and servo motor.
Motor Encoder Interface(MOTOR. ENC.)Used to connect the encoder signals of four servo motors
Dimensions of the Robot Controller
1) Dimensions are in millimeters (inches); Weights are in kilograms (kg) and (pounds (lbs)).2) Dimensions and weights of the robot controller may be revised without prior notice.
19
Model C1040F S C △ 0401 S C △ 0602 S C △ 0604 S C △ 0604 H C △ 0804 7 C △ 0807 S C △ 0807 H C △ 0907 S C △ 0910 S
LC 40 40 60 60 60 80 80 80 86 86
LZ 4.5 4.5 5.5 5.5 5.5 6.6 6.6 6.6 6.6 6.6
LA 46 46 70 70 70 90 90 90 100 100
S 8( +0- 0.009 ) 8( +0
- 0.009 ) 14( +0- 0.011 ) 14( +0
- 0.011 ) 14( +0- 0.011 ) 14( +0
- 0.011 ) 19( +0- 0.013 ) 19( +0
- 0.013 ) 16( +0- 0.011 ) 16( +0
- 0.011 )
LB 30( +0- 0.021 ) 30( +0
- 0.021 ) 50( +0- 0.025 ) 50( +0
- 0.025 ) 50( +0- 0.025 ) 70( +0
- 0.030 ) 70( +0- 0.030 ) 70( +0
- 0.030 ) 80( +0- 0.030 ) 80( +0
- 0.030 )
LL(without brake) 79.1 100.6 105.5 130.7 145.8 112.3 138.3 151.1 130.2 153.2
LL(with brake) -- 136.8 141.6 166.8 176.37 152.8 178 189 161.3 184.3
LS 20 20 27 27 27 27 32 32 30 30
LR 25 25 30 30 30 30 35 35 35 35
LE 2.5 2.5 3 3 3 3 3 3 3 3
LG 5 5 7.5 7.5 7.5 8 8 8 8 8
LW 16 16 20 20 20 20 25 25 20 20
RH 6.2 6.2 11 11 11 11 15.5 15.5 13 13
WK 3 3 5 5 5 5 6 6 5 5
W 3 3 5 5 5 5 6 6 5 5
T 3 3 5 5 5 5 6 6 5 5
TP M3 Depth 8
M3 Depth 8
M4 Depth 15
M4 Depth 15
M4 Depth 15
M4 Depth 15
M6 Depth 20
M6 Depth 20
M5 Depth 15
M5 Depth 15
1) Dimensions are in millimeters.2) Dimensions of the servo motors may be revised without prior notice.
3) The boxes ( ) in the model names are for optional configurations (keyway, brake and oil seal.) 4) The boxes ( △ ) in the model names are for resolution types. △ =1: Incremental encoder, 20-bit; △ =2: Incremental encoder, 17-bit)
Servo Motor Dimensions ■ Frame Size 86mm and below
Speed-Torque Curves (T-N Curves)Torque (N-m)
ECMA-C 0602 □ S ECMA-C 0807 □ SECMA-C 0807 □ H
Torque (N-m) Torque (N-m)
ECMA-C 0604 □ SECMA-C 0604 □ HECMA-C 0804 □ 7
Torque (N-m)
Continuous Duty Zone Continuous Duty Zone Continuous Duty Zone Continuous Duty Zone
ECMA-C 0401 □ S
Torque (N-m)
Speed (r/min) Speed (r/min) 速度 (r/min) Speed (r/min) Speed (r/min)Continuous Duty Zone
Intermittent Duty Zone Intermittent Duty Zone Intermittent Duty Zone Intermittent Duty Zone Intermittent Duty Zone
ECMA-C1040F □ S
ECMA-C 0910 □ S
Torque (N-m)
7.14(298%)
2.38(100%)
6.00(251%)
Speed (r/min)
ECMA-C 0907 □ S
Continuous Duty Zone
Intermittent Duty Zone
8.78(276%)
3.18(100%)
2,000 3,000
Torque (N-m)
Speed (r/min)
Continuous Duty Zone
Intermittent Duty Zone
5.85(184%)
20
Model C1040F S C △ 0401 S C △ 0602 S C △ 0604 S C △ 0604 H C △ 0804 7 C △ 0807 S C △ 0807 H C △ 0907 S C △ 0910 S
LC 40 40 60 60 60 80 80 80 86 86
LZ 4.5 4.5 5.5 5.5 5.5 6.6 6.6 6.6 6.6 6.6
LA 46 46 70 70 70 90 90 90 100 100
S 8( +0- 0.009 ) 8( +0
- 0.009 ) 14( +0- 0.011 ) 14( +0
- 0.011 ) 14( +0- 0.011 ) 14( +0
- 0.011 ) 19( +0- 0.013 ) 19( +0
- 0.013 ) 16( +0- 0.011 ) 16( +0
- 0.011 )
LB 30( +0- 0.021 ) 30( +0
- 0.021 ) 50( +0- 0.025 ) 50( +0
- 0.025 ) 50( +0- 0.025 ) 70( +0
- 0.030 ) 70( +0- 0.030 ) 70( +0
- 0.030 ) 80( +0- 0.030 ) 80( +0
- 0.030 )
LL(without brake) 79.1 100.6 105.5 130.7 145.8 112.3 138.3 151.1 130.2 153.2
LL(with brake) -- 136.8 141.6 166.8 176.37 152.8 178 189 161.3 184.3
LS 20 20 27 27 27 27 32 32 30 30
LR 25 25 30 30 30 30 35 35 35 35
LE 2.5 2.5 3 3 3 3 3 3 3 3
LG 5 5 7.5 7.5 7.5 8 8 8 8 8
LW 16 16 20 20 20 20 25 25 20 20
RH 6.2 6.2 11 11 11 11 15.5 15.5 13 13
WK 3 3 5 5 5 5 6 6 5 5
W 3 3 5 5 5 5 6 6 5 5
T 3 3 5 5 5 5 6 6 5 5
TP M3 Depth 8
M3 Depth 8
M4 Depth 15
M4 Depth 15
M4 Depth 15
M4 Depth 15
M6 Depth 20
M6 Depth 20
M5 Depth 15
M5 Depth 15
1) Dimensions are in millimeters.2) Dimensions of the servo motors may be revised without prior notice.
3) The boxes ( ) in the model names are for optional configurations (keyway, brake and oil seal.) 4) The boxes ( △ ) in the model names are for resolution types. △ =1: Incremental encoder, 20-bit; △ =2: Incremental encoder, 17-bit)
Servo Motor Dimensions ■ Frame Size 100mm and 130mm
Model C △ 1010 S E △ 1305 S E △ 1310 S E △ 1315 S F △ 1308 S G △ 1303 S G △ 1306 S G △ 1309 SLC 100 130 130 130 130 130 130 130
LZ 9 9 9 9 9 9 9 9
LA 115 145 145 145 145 145 145 145
S 22( +0- 0.013 ) 22( +0
- 0.013 ) 22( +0- 0.013 ) 22( +0
- 0.013 ) 22( +0- 0.013 ) 22( +0
- 0.013 ) 22( +0- 0.013 ) 22( +0
- 0.013 )
LB 95( +0- 0.035 ) 110( +0
- 0.035 ) 110( +0- 0.035 ) 110( +0
- 0.035 ) 110( +0- 0.035 ) 110( +0
- 0.035 ) 110( +0- 0.035 ) 110( +0
- 0.035 )
LL(without brake) 153.3 147.5 147.5 167.5 152.5 147.5 147.5 163.5
LL(with brake) 192.5 183.5 183.5 202 181 183.5 183.5 198
LS 37 47 47 47 47 47 47 47
LR 45 55 55 55 55 55 55 55
LE 5 6 6 6 6 6 6 6
LG 12 11.5 11.5 11.5 11.5 11.5 11.5 11.5
LW 32 36 36 36 36 36 36 36
RH 18 18 18 18 18 18 18 18
WK 8 8 8 8 8 8 8 8
W 8 8 8 8 8 8 8 8
T 7 7 7 7 7 7 7 7
TP M6Depth 20
M6Depth 20
M6Depth 20
M6Depth 20
M6Depth 20
M6Depth 20
M6Depth 20
M6Depth 20
1) Dimensions are in millimeters.2) Dimensions of the servo motors may be revised without prior notice.
3) The boxes ( ) in the model names are for optional configurations (keyway, brake and oil seal.) 4) The boxes ( △ ) in the model names are for resolution types. △ =1: Incremental encoder, 20-bit; △ =2: Incremental encoder, 17-bit);△ = A:Absolute type
Torque (N.m)
Torque (N.m)
Torque (N.m)
Torque (N.m)
Torque (N.m)
Torque (N.m)
Torque (N.m) Torque (N.m)
Speed (r/min)
連續領域
Intermittent Duty Zone
Intermittent Duty Zone
ECMA-C △ 1010 □S
ECMA-G △ 1306□S ECMA-G △ 1309□S
Speed (r/min) Speed (r/min)
連續領域 連續領域
ECMA-E △ 1310□S ECMA-E △ 1315□S ECMA-F △ 1308 □ S
Speed (r/min)2,300
連續領域
ECMA-G △ 1303 □ S
Speed (r/min)連續領域
Speed (r/min)
連續領域
Speed (r/min)
連續領域
Speed (r/min)
連續領域
ECMA-E △ 1305□S
Speed-Torque Curves (T-N Curves)21.5
7.16
4.8
Intermittent Duty Zone
Intermittent Duty Zone
Intermittent Duty Zone
Intermittent Duty Zone
Intermittent Duty Zone Intermittent Duty Zone
21
Servo Motor Specifications ■ Low Inertia Series
ECMA SeriesC104 C △ 04 C △ 06 C △ 08 C △ 09 C △ 10
0F 01 02 04 S 04 07 07 10 10Rated output power (kW) 0.05 0.1 0.2 0.4 0.4 0.75 0.75 1.0 1.0Rated torque(N-m)*1 0.159 0.32 0.64 1.27 1.27 2.39 2.39 3.18 3.18
Maximum torque(N-m) 0.477 0.96 1.92 3.82 3.82 7.16 7.14 8.78 9.54Rated speed(r/min) 3000 3000 3000
Maximum speed(r/min) 5000 3000 5000Rated current(A) 0.69 0.90 1.55 2.60 2.60 5.10 3.66 4.25 7.30
Maximum current(A) 2.05 2.70 4.65 7.80 7.80 15.3 11 12.37 21.9Power rating(kW/s) 12.27 27.7 22.4 57.6 24.0 50.4 29.6 38.6 38.1Rotor moment of inertia
(x10-4kg-m2)(without brake) 0.0206 0.037 0.177 0.277 0.68 1.13 1.93 2.62 2.65
Mechanical time constant (ms) 1.14 0.75 0.80 0.53 0.74 0.63 1.72 1.20 0.74Torque constant-KT (N-m/A) 0.23 0.36 0.41 0.49 0.49 0.47 0.65 0.75 0.44
Voltage constant-KE (mV/(r/min) 9.8 13.6 16.0 17.4 18.5 17.2 24.2 27.5 16.8Armature resistance (Ohm) 12.7 9.30 2.79 1.55 0.93 0.42 1.34 0.897 0.20Armature inductance (mH) 26 24.0 12.07 6.71 7.39 3.53 7.55 5.7 1.81
Electrical time constant (ms) 2.05 2.58 4.30 4.30 7.96 8.36 5.66 6.35 9.30Insulation class A class(UL),B class(CE)
Insulation resistance 100MΩ,DC 500V aboveInsulation strength 1.8k Vac,1 sec
Weight (kg)(without brake) 0.42 0.5 1.2 1.6 2.1 3.0 2.9 3.8 4.3Weight (kg)(with brake) -- 0.8 1.5 2.0 2.9 3.8 3.69 5.5 4.7
Max. radial shaft load (N) 78.4 78.4 196 196 245 245 245 245 490Max. thrust shaft load (N) 39.2 39.2 68 68 98 98 98 98 98
Power rating (kW/s)(with brake) -- 25.6 21.3 53.8 22.1 48.4 29.3 37.9 30.4Rotor moment of inertia (x10-4kg-m2)(with brake) -- 0.04 0.19 0.30 0.73 1.18 1.95 2.67 3.33
Mechanical time constant (ms)(with brake) -- 0.81 0.85 0.57 0.78 0.65 1.74 1.22 0.93
Brake holding torque [Nt-m (min)]*2 -- 0.3 1.3 1.3 2.5 2.5 2.5 2.5 8.0Brake power consumption (at 20˚C)[W] -- 7.3 6.5 6.5 8.2 8.2 8.2 8.2 18.7
Brake release time [ms (Max)] -- 5 10 10 10 10 10 10 10Brake pull-in time [ms (Max)] -- 25 70 70 70 70 70 70 70
Vibration grade (μm) 15Operating temperature (˚C) 0ºC ~ 40ºCStorage temperature (˚C) -10ºC ~ 80ºC
Operating humidity 20 ~ 90%RH(non-condensing)
Storage humidity 20 ~ 90%RH(non-condensing)
Vibration capacity 2.5G
IP Rating IP65 (when waterproof connectors are used, or when an oil seal is used to be fitted to the rotating shaft (an oil seal model is used))
Approvals
Note:*1 Rate torque values are continuous permissible values at 0 ~ 40 ∘ C ambient temperature when attaching with the sizes of heatsinks listed below:
ECMA-_ _ 04 / 06 / 08:250mm x 250mm x 6mm ECMA-_ _ 10:300mm x 300mm x 12mmECMA-_ _ 13:400mm x 400mm x 20mmMaterial:Aluminum – F40, F60, F80, F100, F130
*2 The holding brake is used to hold the motor shaft, not for braking the rotation. Never use it for decelerating or stopping the machine
22
Servo Motor Specifications ■ Medium/ Medium-High / High Inertia Series
ECMA SeriesC △ 06 C △ 08 E △ 13 F △ 13 G △ 1304 H 07 H 05 10 15 08 03 06 09
Rated output power (kW) 0.4 0.75 0.5 1.0 1.5 0.85 0.3 0.6 0.9Rated torque(N-m)*1 1.27 2.39 2.39 4.77 7.16 5.41 2.86 5.73 8.59
Maximum torque(N-m) 3.82 7.16 7.16 14.3 21.48 13.8 8.59 17.19 21.48Rated speed(r/min) 3000 3000 2000 1500 1000
Maximum speed(r/min) 5000 5000 3000 3000 2000Rated current(A) 2.6 5.1 2.9 5.6 8.3 7.1 2.5 4.8 7.5
Maximum current(A) 7.8 15.3 8.7 16.8 24.9 19.4 7.5 14.4 22.5Power rating(kW/s) 21.7 19.63 7.0 27.1 45.9 21.52 10.0 39.0 66.0Rotor moment of inertia
(x10-4kg-m2)(without brake) 0.743 2.91 8.17 8.41 11.18 13.6 8.17 8.41 11.18
Mechanical time constant (ms) 1.42 1.6 1.91 1.51 1.10 2.43 1.84 1.40 1.06Torque constant-KT (N-m/A) 0.49 0.47 0.83 0.85 0.87 0.76 1.15 1.19 1.15
Voltage constant-KE (mV/(r/min) 17.4 17.2 30.9 31.9 31.8 29.2 42.5 43.8 41.6Armature resistance (Ohm) 1.55 0.42 0.57 0.47 0.26 0.38 1.06 0.82 0.43Armature inductance (mH) 6.71 3.53 7.39 5.99 4.01 4.77 14.29 11.12 6.97
Electrical time constant (ms) 4.3 8.36 12.96 12.88 15.31 12.55 13.55 13.50 16.06Insulation class A class(UL),B class(CE)
Insulation resistance 100MΩ,DC 500VInsulation strength 1.8k Vac,1 sec
Weight (kg)(without brake) 1.8 3.4 6.8 7.0 7.5 8.6 6.8 7.0 7.5Weight (kg)(with brake) 2.2 3.9 8.2 8.4 8.9 10.0 8.2 8.4 8.9
Max. radial shaft load (N) 196 245 490 490 490 490 490 490 490Max. thrust shaft load (N) 68 98 98 98 98 98 98 98 98
Power rating (kW/s)(with brake) 21.48 19.3 6.4 24.9 43.1 19.78 9.2 35.9 62.1Rotor moment of inertia (x10-4kg-m2)(with brake) 0.751 2.96 8.94 9.14 11.90 14.8 8.94 9.14 11.9
Mechanical time constant (ms)(with brake) 1.43 1.62 2.07 1.64 1.19 2.65 2.0 1.51 1.13
Brake holding torque [Nt-m (min)]*2 1.3 1.3 10.0 10.0 10.0 10.0 10.0 10.0 10.0Brake power consumption (at 20˚C)[W] 6.5 6.5 19.0 19.0 19.0 19.0 19.0 19.0 19.0
Brake release time [ms (Max)] 10 10 10 10 10 10 10 10 10Brake pull-in time [ms (Max)] 70 70 70 70 70 70 70 70 70
Vibration grade (μm) 15Operating temperature (˚C) 0ºC ~ 40ºC (32ºF to 104ºF)Storage temperature (˚C) -10ºC~ 80ºC(-14ºF to 176ºF)
Operating humidity 20 ~ 90%RH(non-condensing)
Storage humidity 20 ~ 90%RH(non-condensing)
Vibration capacity 2.5G
IP Rating IP65 (when waterproof connectors are used, or when an oil seal is used to be fitted to the rotating shaft (an oil seal model is used))
Approvals
Note:*1 Rate torque values are continuous permissible values at 0 ~ 40 ∘ C ambient temperature when attaching with the sizes of heatsinks listed below:
ECMA-_ _ 04 / 06 / 08:250mm x 250mm x 6mm ECMA-_ _ 10:300mm x 300mm x 12mmECMA-_ _ 13:400mm x 400mm x 20mmMaterial:Aluminum – F40, F60, F80, F100, F130
*2 The holding brake is used to hold the motor shaft, not for braking the rotation. Never use it for decelerating or stopping the machine
23
Handheld HMIDOP-H Series
Dimensions
257.4(10.13")
170.
3(6.
7")
71.8(2.83")
12.5(0.5") 0.72")
27.8
(1.1
")
41(1.61")
51.3
(2.0
2")
53.5
(2.1
1")
1)Dimensions are in millimeters (inches); Weights are in grams (g).2)Dimensions and weights of the handheld HMI may be revised without prior notice.
Unit: mm (inch) Weight: 720g (without cable)
24
SpecificationsModel DOP-H07E425ZM DOP-H07E465ZM
LCD Module
Display Size & Type 7” Widescreen TFT LCDDisplay Colors 65536 colors
Resolution (pixels) 800 x 480Backlight LED Back Light
Luminance (cd/m2) 450Backlight Life
(hours) 20,000
MCU 400 MHzFlash ROM(Bytes) 128MB
RAM(Bytes) 64MBBackup Memory (Bytes) 16MB
Buzzer Multi-Tone Frequency(2K ~ 4K Hz)/ 80dBAudio Output N/A
USB 1 USB Client Ver 2.0SD SD Card (Support SDHC)
Serial COM Port N/AEthernet 1 Ports(Note2)
Function Key 15Cable Length & Type 5 m
Emergency Stop
A-contact: B-contact:1 Rated voltage:DC 24V
Maximum rated current:500mA Minimum allowable load:DC 5V/1mA
Complies with IEC60947-5-1, EN60947-5-1, IEC60947-5-5, EN60947-5-5, UL 508, CSA C22.2 No.14, GB 14085.5
3-Position Operation Switch
A-contact:1 Rated voltage:DC 24V
Maximum rated current:500mA Minimum allowable load:DC 3V/5mA
Complies with EN/IEC60947-5-8, IEC60947-5-1, EN60947-5-1, JIS C8201-5-1, UL508, CSA C22.2 NO. 14 Applicable standards for use with ISO12100-1、-2/EN12100-1、-2, IEC60204-1/EN60204-1, ISO11161/
prEN11161, ISO10218/EN775, ANSI/RIA R15.06, ANSI B11.19
Handwheel N/A
Rated Voltage:<DC 24V in Resolution:50(P/R)
Output Pulse:Square Output Phase:A, B
Phase difference of A and B: 90° ± 45°Max. Frequency response: 200 Hz
Perpetual Calendar Built-inCooling Method Natural coolingSafety Approval CE
Waterproof Level of Panel Display IP55Operation Voltage DC +24V(-10% ~ +15%)Voltage Endurance AC500V for 1 minute (between charging DC24V terminal and FG terminals)Power Consumption 5.6W
Backup Battery 3V lithium battery CR2450 × 1Backup Battery Life About 5 years or more at 25 ∘ C but subjects to the temperature and the conditions during usage.
Operation Temperature 0ºC ~ 40ºCStorage Temperature -20ºC ~ +60ºC, 10% ~ 90% RH
Operating Environment 10% ~ 90% RH【0 ~ 40ºC】,10% ~ 55% RH【41 ~ 50ºC】,Pollution Degree 2Vibration Conforms to IEC61131-2; Continuous: 5Hz ~ 8.3Hz 3.5 mm, 8.3Hz ~ 150Hz 1G
Shock Conforms to IEC60068-2-27; 11ms, 15G Peak , X, Y, Z direction for 6 timesDimensions
(W)x(H)x(D)mm 257.4 x 170.3 x71.8 (Emergency stop switch and hook are included.)
Weight 750g (cable excluded)Note:1) The half-life of backlight is defined as original luminance being reduced by 50% when the maximum driving current is supplied to HMI.2) With built-in isolated power circuit.3) Please use isolated power supply.4) Some models are in the process of application for UL and KCC certification. For more information, please consult our distributors.5) The value of the power consumption indicates the electrical power consumed by HMI with no peripheral devices connected. To ensure normal operation, it is recommended using a power supply with a capacity 1.5 ~2 times the value of the power consumption.6) The content of this catalogue may be revised without prior notice. Please consult our distributors or download the most updated version at http://www.deltaww.com
(Note 1)
(Note 3) (Note 2)
(Note 5)
25
Power ConnectorsASDBCAPW0000 (for servo motors with 40/60/80/86 frame size)
ASDBCAPW0100(for servo motors with 40/60/80/86 frame size and brake cable)
ASD-CAPW1000 (for servo motors with 100/130 frame size)
Title Part No. Manufacturer
Housing C4201H00-2*2PA JOWLE
Terminal C4201TOP-2 JOWLE
Title Part No. Manufacturer
Housing C4201H00-2*3PA JOWLE
Terminal C4201TOP-2 JOWLE
3106A-20-18S
Encoder ConnectorsASD-ABEN0000
ASD-CAPW1103,ASD-CAPW1105
Title Part No. Manufacturer
MOTOR SIDE
Housing AMP(1-172161-9) AMP
Terminal AMP(170359-3) AMP
CLAMP DELTA(34703237XX) DELTA
DRIVE SIDE
PLUG 3M 10120-3000PE 3M
SHELL 3M 10320-52A0-008 3M
Title Part No. Manufacturer
MOTOR SIDE 3106A-20-29S ------
DRIVE SIDE
PLUG 3M 10120-3000PE 3M
SHELL 3M 10320-52A0-008 3M
Encoder Converter Module ASD-PBSC2626
3M10326 3M
1032
6
145.5mm
86.7
8mm
35.5
5mm
50mm
Optional Accessories
26
Optional Cable and ConnectorsTitle Type Part No.
Terminal Accessory Kit
Standard I/O Terminal(STD.DIO) Main Circuit Terminal(R,S,T) Control Circuit Terminal(24V) Servo Motor Output(U,V,W) 2 Set STO Connector Motor Brake Output Terminal STO I/O Terminal (Safe Torque Off) System I/O Terminal(SYS.DIO) Motor Encoder Interface (MOTOR. ENC.) Full-Closed Loop Control Interface(EXT.ENC)
GMC-MS00AC
Converter Board Module for Encoder Converter Board for Servo Motor Encoder Connector ASD-PBSC2626
Servo Motor Encoder Connector
Quick Connector ASD-ABEN0000
Military Connector ASD-CAEN1000
Servo Motor Power Connector
Non Quick Release Connector ASDBCAPW0000
Quick Release Connector ASDBCAPW0100
Military Connector ASD-CAPW1000
DMCNET Extension IO Module
DMCNET Extension Module 32 DI (NPN//PNP) ASD-DMC-RM32MN
DMCNET Extension Module 32 DO Transistor Output ASD-DMC-RM32NT
DMCNET Extension Module 64 DI (NPN//PNP) ASD-DMC-RM64MN
DMCNET Extension Module 64 DO Transistor Output ASD-DMC-RM64NT
DMCNET Extension Module 16 DI/ 16 DO Transistor Output ASD-DMC-RM32PT
DMCNET Extension Module with 4 sets of analog input ASD-DMC-RM04AD
DMCNET Extension Module with 4 sets of analog output ASD-DMC-RM04DA
DMCNET Extension Module with 4 sets of pulse output ASD-DMC-RM04PI
DMCNet Extension Cable
0.3m UC-CMC003-01A
0.5m UC-CMC005-01A
1m UC-CMC010-01A
1.5m UC-CMC015-01A
2m UC-CMC020-01A
3m UC-CMC030-01A
5m UC-CMC050-01A
10m UC-CMC100-01A
20m UC-CMC200-01A
DELTA_IA-ASDA_ASDA-MS_C_EN_20170116
Industrial Automation HeadquartersDelta Electronics, Inc. Taoyuan Technology Center18 Xinglong Road, Taoyuan District, Taoyuan City 33068, Taiwan (R.O.C.)TEL: 886-3-362-6301 / FAX: 886-3-371-6301
AsiaDelta Electronics (Jiangsu) Ltd.Wujiang Plant 31688 Jiangxing East Road, Wujiang Economic Development ZoneWujiang City, Jiang Su Province, P.R.C. 215200TEL: 86-512-6340-3008 / FAX: 86-769-6340-7290
Delta Greentech (China) Co., Ltd.238 Min-Xia Road, Pudong District, ShangHai, P.R.C. 201209TEL: 86-21-58635678 / FAX: 86-21-58630003 Delta Electronics (Japan), Inc.Tokyo Office 2-1-14 Minato-ku Shibadaimon, Tokyo 105-0012, JapanTEL: 81-3-5733-1111 / FAX: 81-3-5733-1211
Delta Electronics (Korea), Inc.1511, Byucksan Digital Valley 6-cha, Gasan-dong, Geumcheon-gu, Seoul, Korea, 153-704TEL: 82-2-515-5303 / FAX: 82-2-515-5302
Delta Electronics Int’l (S) Pte Ltd.4 Kaki Bukit Ave 1, #05-05, Singapore 417939TEL: 65-6747-5155 / FAX: 65-6744-9228
Delta Electronics (India) Pvt. Ltd.Plot No 43 Sector 35, HSIIDC Gurgaon, PIN 122001, Haryana, India TEL : 91-124-4874900 / FAX : 91-124-4874945
AmericasDelta Products Corporation (USA)Raleigh OfficeP.O. Box 12173,5101 Davis Drive, Research Triangle Park, NC 27709, U.S.A.TEL: 1-919-767-3800 / FAX: 1-919-767-8080
Delta Greentech (Brasil) S.A.Sao Paulo OfficeRua Itapeva, 26 - 3° andar Edificio Itapeva One-Bela Vista01332-000-São Paulo-SP-BrazilTEL: 55 11 3568-3855 / FAX: 55 11 3568-3865
EuropeDelta Electronics (Netherlands) B.V.Eindhoven OfficeDe Witbogt 20, 5652 AG Eindhoven, The Netherlands TEL: +31 (0)40-8003800 / FAX: +31 (0)40-8003898
*We reserve the right to change the information in this catalogue without prior notice.