ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
page 12 - 31
page 2 - 11
Diaphragm Valve MV 310 - manual -
Diaphragm Valve MV 310 - pneumatic -
Diaphragm Valve MV 310 manualgood control characteristics, visual position indicator
Advantage• as standard with visual position indicator
Application• chemical plants• industrial plants• water treatment• electroplating plants
Intended Use• for shut-off and control purposes in technical processing plants
Flow Media• Neutral and aggressive fluid or gaseous media, also with abrasive
constituents, provided that the valve components coming intocontact with the media are resistant at the operating temperaturein accordance with the ASV-resistance guide.
• For nitric acid or sulfuric acid please specify the precise operatingconditions of the application.
Testing• Requirements and tests/inspections according to DIN 3441,
3442, 8063 and 16962. DIN EN 12266, leakage rate A tested.
Nominal Pressure (H2O, 20°C)• PN 10
Fluid Temperature• see pressure-/temperature diagram
Operating Pressure• see pressure-/temperature diagram
Size• DN 15 - DN 100
Valve Body• PVC-U• PP• PVDF
Diaphragm• EPDM• FPM on request• PTFE (EPDM diaphragm with PTFE coating on the surfaces coming
into contact with the medium)
Bonnet• PP, glass fibre reinforced
Spindle• DN 15 - DN 50: made of thermoplastic (PA)• DN 65 - DN 100: made of steel (C1)
Spindle Nut• made of thermoplastic (PA)
Handwheel• made of thermoplastic (PA)
Sealing• -• FPM• EPDM
Actuation• manually by means of an ergonomically shaped non-rising
handwheel
Connection• DN 15 - DN 50: union DIN 8063• GFR flange DIN EN 1092, PN 10/16, with DIN face-to-face
dimension• PP/steel flange DIN EN 1092, PN 10/16, with DIN face-to-face
dimension• union socket end for solvent welding DIN ISO (PVC-U)• union socket end for fusion welding DIN ISO (PP)• union socket end for fusion welding DIN ISO (PVDF)• union end acc. to BS, ANSI or JIS on request• spigot end for solvent welding DIN ISO (PVC-U)• fusion spigot end DIN ISO (PP)• fusion spigot end DIN ISO (PVDF)
Mounting Position• as required
Fastening• via threaded inserts (metal inserts) in the valve body
Colour• body: PVC-U, grey, RAL 7011• body: PP, grey, RAL 7032• body: PVDF, opaque, yellowish-white• bonnet: orange, RAL 2004• GFR Flanges: black, RAL 9011• PP/Steel Flanges: black, RAL 9011
1All rights for technical modifications withheld> data sheet no.: 330027 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Pressure/temperature diagram
P = operating pressureT = temperatureThe pressure/temperature limits are applicable for the statednominal pressures and a computed operating life factor of 25 years.These are standard values for harmless media (DIN 2403), to whichthe valve material is resistant.For other media please refer to the ASV resistance guide.The durability of wear parts depends on the operating conditionsof the application.For temperatures below 0°C (PP < +10°C) please specify the preciseoperating conditions of the application.The rated pressure depends on the valve size and material. Forthe corresponding rated pressure value of the valve, please referto the »Order table«.
Pressure loss curve (standard values for H2O, 20°C)
∆P = pressure lossQ = flowpressure loss and kv valueThe diagram shows the pressure loss ∆P in relation to the flow Q.Conversion aid:cv = kv x 0.07; fv = kv x 0.0585Units:kv [l/min]; cv [gal/min] US; fv [gal/min] GB
Flow characteristic
VO = valve openingFR = Kvvalue
> data sheet no.: 330027 - 2013/06/04All rights for technical modifications withheld2ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310 manual
Maintenance noteScrew tightening torque (Nm)
Check the tightening torque of the body screws at certain intervalsin case of setting of the diaphragms and/or temperaturefluctuations.
Operating noteSafe operation of the valve can only be ensured if it is properlyinstalled, operated, serviced or repaired by qualified personnelaccording to its intended use while observing the accidentprevention regulations, safety regulations, relevant standards,directives/technical regulations or codes of practice such as e.g.DIN, DIN EN, DIN ISO and DVS*. *DVS = German Welding SocietyThe intended use includes adhering to specified limit values forpressure and temperature, as well as checking the resistance. Thisrequires all components coming into contact with the medium tobe "resistant" in accordance with the ASV resistance guide.Please take into account that the material PTFE is classified asresistant against many media, however, PTFE is not diffusion tightwhen used as a film, e.g. for the ASV membranes. Please contactus for limit cases (nitric acid or sulfuric acid).
3All rights for technical modifications withheld> data sheet no.: 330027 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310 manual
body PVC-U
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
114798113398113397113396114794114793EPDMEPDMPVC-Usocket end DIN ISO 114804
2.50 kg1148032.10 kg
1148021.20 kg
1148011.10 kg
1148000.50 kg
1147990.50 kg
FPMPTFEweight
622806227962278622776227662275-EPDMPVC-Uspigot end DIN ISO 65997
1.90 kg659961.80 kg
659950.90 kg
659940.83 kg
659930.40 kg
659920.38 kg
-PTFEweight
650266502565024650236502265021-EPDMGFRflange DIN EN 1092 69901
4.60 kg699003.64 kg
698992.28 kg
698981.61 kg
698970.96 kg
698960.84 kg
-PTFEweight
body PP
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
114810114809113400113399114806114805EPDMEPDMPPsocket end DIN ISO 114816
2.12 kg1148151.88 kg
1148141.06 kg
1148130.93 kg
1148122.39 kg
1148110.44 kg
FPMPTFEweight
622866228562284622836228262281-EPDMPPspigot end DIN ISO 67005
1.74 kg670041.68 kg
670032.36 kg
670020.82 kg
670010.40 kg
670000.38 kg
-PTFEweight
650446504365042650416504065039-EPDMGFRflange DIN EN 1092 69907
2.50 kg699062.22 kg
699051.41 kg
699041.08 kg
699030.62 kg
699020.52 kg
-PTFEweight
> data sheet no.: 330027 - 2013/06/04All rights for technical modifications withheld4ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310 manual, [d20 - d63]
body PVDF
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
1148282.80 kg
1148272.44 kg
1148261.26 kg
1148251.07 kg
1148240.55 kg
1148230.50 kg
FPMPTFEweight
PVDFsocket end DIN ISO
670112.30 kg
670102.20 kg
670091.10 kg
670080.97 kg
670070.47 kg
670060.44 kg
-PTFEweight
PVDFspigot end DIN ISO
677313.98 kg
677303.64 kg
677291.80 kg
677281.75 kg
677271.11 kg
677260.87 kg
-PTFEweight
PP / steelflange DIN EN 1092
5All rights for technical modifications withheld> data sheet no.: 330027 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310 manual, [d20 - d63]
dimensions
635040322520d(mm)504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)
dimensions(mm)
1301301001009090A181717151412bPP/PVC-U1917.517.515.514.513bPVDF
11911992927272B181818141414d2
16515014011510595D1078779665646D1PP987972585041D1PVC-U
1098978645747D1PVDF988776f
404040262626h17516913513110298H125110100857565K230200180160150130L224194174154144124L118415413411610890L219016014012211496L3244207181158146125L4PP266222192166152128L4PVC-U248210184162150128L4PVDFM8M8M8M6M6M6M302623211916tPP/PVDF383126221916tPVC-U454545262626w
444444z
> data sheet no.: 330027 - 2013/06/04All rights for technical modifications withheld6ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310 manual, [d20 - d63]
body PVC-U
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)101010PN(bar)
ident No.sealingdiaphragmConnection
451784517745176-EPDMPVC-Uspigot end DIN ISO 45196
9.50 kg451956.50 kg
451946.10 kg
-PTFEweight
464244642346422-EPDMGFRflange DIN EN 1092 46430
12.70 kg464299.40 kg
464288.60 kg
-PTFEweight
body PP
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)101010PN(bar)
ident No.sealingdiaphragmConnection
452144521345212-EPDMPPspigot end DIN ISO 45232
8.20 kg452315.60 kg
452305.20 kg
-PTFEweight
464364643546434-EPDMGFRflange DIN EN 1092 46442
11.40 kg464418.60 kg
464407.70 kg
-PTFEweight
body PVDF
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)101010PN(bar)
ident No.sealingdiaphragmConnection
4526811.40 kg
452678.60 kg
452667.70 kg
-PTFEweight
PVDFspigot end DIN ISO
4645413.90 kg
4645310.20 kg
464499.40 kg
-PTFEweight
PP / steelflange DIN EN 1092
7All rights for technical modifications withheld> data sheet no.: 330027 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310 manual, [d75 - d110]
dimensions
1109075d(mm)1008065DN(mm)
432 1/2DN(inch)
dimensions(mm)
240190190A202018bPP/PVC-U222119bPVDF
217177177B181818d2
220200185D121110f645454h
285245245H180160145K350310290L340300284L1M10M12M12M
453833.5tPP/PVDF615244tPVC-U60--v
120100100w884z
> data sheet no.: 330027 - 2013/06/04All rights for technical modifications withheld8ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310 manual, [d75 - d110]
Item Overview
designationquantitypositionvalve body11bonnet12diaphragm13spindle14spindle nut15handwheel16indicator cap17O-ring18O-ring19hexagon bolt411disc812hexagon nut413bearing ring115union nut117union end118O-ring119
designationquantitypositionvalve body11diaphragm12bonnet13pressure piece14spindle15spindle nut17handwheel18indicator cap19indicator pin110axial bearing111axial bearing disc212spring dowel sleeve113O-ring114O-ring115hexagon bolt416disc8/1217hexagon nut4/818name plate120
9All rights for technical modifications withheld> data sheet no.: 330027 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310 manual
> data sheet no.: 330027 - 2013/06/04All rights for technical modifications withheld10ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310 manual
Diaphragm Valve MV 310, pneumaticwith pneumatically directly controlled actuator
Advantage• good control characteristics• DN 15 - DN 50 equipped as standard with visual position indicator• DN 15 - DN 50: optionally available with lift limit and manual
emergency control• DN 65 - DN 100 optionally available with visual position indicator,
lift limit and manual emergency control
Application• chemical plants• industrial plants• water treatment• electroplating plants
Intended Use• for shut-off and control purposes in technical processing plants
Flow Media• Neutral and aggressive fluid or gaseous media, also with abrasive
constituents, provided that the valve components coming intocontact with the media are resistant at the operating temperaturein accordance with the ASV-resistance guide.
• For nitric acid or sulfuric acid please specify the precise operatingconditions of the application.
Testing• Requirements and tests/inspections according to DIN EN ISO
16135 and ISO 9393. DIN EN 12266, leakage rate A tested.
Nominal Pressure (H2O, 20°C)• PN 6 - PN 10
Fluid Temperature• see pressure-/temperature diagram
Operating Pressure• DN 15 - DN 50: max. 10 bar bei 20°C• DN 65 - DN 100: max. 6 bar at 20°C• Observe the pressure-/temperature diagram!
Size• DN 15 - DN 100
Valve Body• PVC-U• PP• PVDF
Diaphragm• EPDM• FPM on request• PTFE (EPDM diaphragm with PTFE coating on the surfaces coming
into contact with the medium)
Bonnet• DN 15 - DN 50: PP, glass fibre reinforced• DM 65 - DN 100: aluminium, painted
Sealing• -• FPM• EPDM
Actuation• with pneumatic lift actuator
Control Function• NC (normally closed)• NO (normally open)• DA (double acting)
Control Pressure• max. 6 bar (see control curve diagram )
Mounting Position• as required
Connection• DN 15 - DN 50: union DIN 8063• GFR flange DIN EN 1092, PN 10/16, with DIN face-to-face
dimension• PP/steel flange DIN EN 1092, PN 10/16, with DIN face-to-face
dimension• union socket end for solvent welding DIN ISO (PVC-U)• union socket end for fusion welding DIN ISO (PP)• union socket end for fusion welding DIN ISO (PVDF)• spigot end for solvent welding DIN ISO (PVC-U)• fusion spigot end DIN ISO (PP)• fusion spigot end DIN ISO (PVDF)
Fastening• via threaded inserts (metal inserts) in the valve body
Accessories• limit switch unit• pilot solenoid valve• positioner• AS Interface
1All rights for technical modifications withheld> data sheet no.: 330056 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Lift Limit• DN 15 - DN 50 (not suitable for the standard version): It can only
be used for the special version with the metal screw in the topsection of the actuator. The lift is limited by turning theadjustment screw (3.30) clockwise.
• DN 65 - DN 100 special version: Order the actuator upper part inthe metal version for the NC valve. Please request separateinstructions.
Maintenance Note• Check the tightening torque of the body screws at certain
intervals in case of setting of the diaphragms and/or temperaturefluctuations.
• Refer to the table for the tightening torque
Colour• body: PVC-U, grey, RAL 7011• body: PP, grey, RAL 7032• body: PVDF, opaque, yellowish-white• bonnet: orange, RAL 2004• bonnet: d75 - d100; red• GFR Flanges: black, RAL 9011• PP/Steel Flanges: black, RAL 9011
> data sheet no.: 330056 - 2013/06/04All rights for technical modifications withheld2ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Pressure/temperature diagram
P = operating pressureT = temperatureThe pressure/temperature limits are applicable for the statednominal pressures and a computed operating life factor of 25 years.These are standard values for harmless media (DIN 2403), to whichthe valve material is resistant.For other media please refer to the ASV resistance guide.The durability of wear parts depends on the operating conditionsof the application.For temperatures below 0°C (PP < +10°C) please specify the preciseoperating conditions of the application.The rated pressure depends on the valve size and material. Forthe corresponding rated pressure value of the valve, please referto the »Order table«.
Pressure loss curve (standard values for H2O, 20°C)
∆P = pressure lossQ = flowpressure loss and kv valueThe diagram shows the pressure loss ∆P in relation to the flow Q.Conversion aid:cv = kv x 0.07; fv = kv x 0.0585Units:kv [l/min]; cv [gal/min] US; fv [gal/min] GB
Flow characteristic
VO = valve openingFR = Kvvalue
3All rights for technical modifications withheld> data sheet no.: 330056 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic
Control curve MV 310, d20 - d63
pB = operating pressurepS = control pressure
Control curve MV 310, d 75 - d 110
pB = operating pressurepS = control pressure
Control volume (standard liters)
Control function NC
NC: control pressure to connection »B«, valve openConnection »B« = 1/4"
Control function NO, DA
NO: control pressure to connection »A«, valve is closedDA: control pressure to connection »B« valve is openDA: control pressure to connection »A« valve is closedConnection »A«, »B« = 1/4"
Operating noteSafe operation of the valve can only be ensured if it is properlyinstalled, operated, serviced or repaired by qualified personnelaccording to its intended use while observing the accidentprevention regulations, safety regulations, relevant standards,directives/technical regulations or codes of practice such as e.g.DIN, DIN EN, DIN ISO and DVS*. *DVS = German Welding SocietyThe intended use includes adhering to specified limit values forpressure and temperature, as well as checking the resistance. Thisrequires all components coming into contact with the medium tobe "resistant" in accordance with the ASV resistance guide.Please take into account that the material PTFE is classified asresistant against many media, however, PTFE is not diffusion tightwhen used as a film, e.g. for the ASV membranes. Please contactus for limit cases (nitric acid or sulfuric acid).
> data sheet no.: 330056 - 2013/06/04All rights for technical modifications withheld4ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic
Actuator variant NC body PVC-U
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
122823122822122821122820122819122818EPDMEPDMPVC-Usocket end DIN ISO 122830
6.85 kg1228296.45 kg
1228283.22 kg
1228273.13 kg
1228261.58 kg
1228251.57 kg
FPMPTFEweight
673296732867327673266732567324-EPDMPVC-Uspigot end DIN ISO 67345
6.25 kg673446.15 kg
673432.92 kg
673422.86 kg
673411.48 kg
673401.45 kg
-PTFEweight
122865122864122863122862122861122860-EPDMGFRflange DIN EN 1092 122875
7.54 kg1228747.10 kg
1228735.79 kg
1228723.36 kg
1228712.50 kg
1228701.72 kg
-PTFEweight
Actuator variant NO body PVC-U
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
122837122836122835122834122833122832EPDMEPDMPVC-Usocket end DIN ISO 122844
6.85 kg1228436.45 kg
1228423.22 kg
1228413.13 kg
1228401.58 kg
1228391.57 kg
FPMPTFEweight
675576755667555675546755367552-EPDMPVC-Uspigot end DIN ISO 67569
6.25 kg675686.15 kg
675672.92 kg
675662.86 kg
675651.48 kg
675641.45 kg
-PTFEweight
122885122884122883122882122881122880-EPDMGFRflange DIN EN 1092 122895
7.54 kg1228947.10 kg
1228935.79 kg
1228923.36 kg
1228912.50 kg
1228901.72 kg
-PTFEweight
5All rights for technical modifications withheld> data sheet no.: 330056 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d20 - d63]
Actuator variant DA body PVC-U
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
122851122850122849122848122847122846EPDMEPDMPVC-Usocket end DIN ISO 122858
6.55 kg1228576.15 kg
1228562.92 kg
1228552.83 kg
1228541.28 kg
1228531.27 kg
FPMPTFEweight
644106440964408644076440664405-EPDMPVC-Uspigot end DIN ISO 64422
5.95 kg644215.85 kg
644202.62 kg
644192.56 kg
644181.18 kg
644171.15 kg
-PTFEweight
122905122904122903122902122901122900-EPDMGFRflange DIN EN 1092 122915
7.24 kg1229146.80 kg
1229135.49 kg
1229123.06 kg
1229112.20 kg
1229101.42 kg
-PTFEweight
Actuator variant NC body PP
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
122959122958122957122956122955122954EPDMEPDMPPsocket end DIN ISO 122966
6.15 kg1229656.03 kg
1229642.87 kg
1229632.81 kg
1229621.45 kg
1229611.43 kg
FPMPTFEweight
673516735067349673486734767346-EPDMPPspigot end DIN ISO 67363
6.03 kg673625.96 kg
673612.82 kg
673602.78 kg
673591.43 kg
673581.42 kg
-PTFEweight
122994122993122992122991122990122989-EPDMGFRflange DIN EN 1092 123004
7.15 kg1230036.87 kg
1230023.56 kg
1230013.24 kg
1230001.76 kg
1229991.65 kg
-PTFEweight
> data sheet no.: 330056 - 2013/06/04All rights for technical modifications withheld6ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d20 - d63]
Actuator variant NO body PP
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
123296123295123294123293123292123291EPDMEPDMPPsocket end DIN ISO 122973
6.15 kg1229726.03 kg
1229712.87 kg
1229702.81 kg
1229691.45 kg
1229681.43 kg
FPMPTFEweight
675756757467573675726757167570-EPDMPPspigot end DIN ISO 67587
6.03 kg675865.96 kg
675852.82 kg
675842.78 kg
675831.43 kg
675821.42 kg
-PTFEweight
123014123013123012123011123010123009-EPDMGFRflange DIN EN 1092 123242
7.15 kg1232416.87 kg
1232403.56 kg
1232393.24 kg
1232381.76 kg
1232371.65 kg
-PTFEweight
Actuator variant DA body PP
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
122980122979122978122977122976122975EPDMEPDMPPsocket end DIN ISO 122987
5.85 kg1229865.73 kg
1229852.57 kg
1229842.51 kg
1229831.15 kg
1229821.13 kg
FPMPTFEweight
644286442764426644256442464423-EPDMPPspigot end DIN ISO 64440
5.73 kg644395.66 kg
644382.52 kg
644372.48 kg
644361.13 kg
644351.12 kg
-PTFEweight
123024123023123022123021123020123019-EPDMGFRflange DIN EN 1092 123034
6.85 kg1230336.57 kg
1230323.26 kg
1230312.94 kg
1230301.46 kg
1230291.35 kg
-PTFEweight
7All rights for technical modifications withheld> data sheet no.: 330056 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d20 - d63]
Actuator variant NC body PVDF
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
1230957.05 kg
1230946.60 kg
1230933.32 kg
1230923.19 kg
1230911.61 kg
1230901.60 kg
FPMPTFEweight
PVDFsocket end DIN ISO
673696.45 kg
673686.30 kg
673673.02 kg
673662.92 kg
673651.51 kg
673641.48 kg
-PTFEweight
PVDFspigot end DIN ISO
1231407.40 kg
1231397.74 kg
1231383.72 kg
1231373.70 kg
1231362.15 kg
1231351.91 kg
-PTFEweight
PP / steelflange DIN EN 1092
Actuator variant NO body PVDF
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
1231097.05 kg
1231086.60 kg
1231073.32 kg
1231063.19 kg
1231051.61 kg
1231041.60 kg
FPMPTFEweight
PVDFsocket end DIN ISO
675936.45 kg
675926.30 kg
675913.02 kg
675902.92 kg
675891.51 kg
675881.48 kg
-PTFEweight
PVDFspigot end DIN ISO
1232327.40 kg
1232317.74 kg
1232303.72 kg
1232293.70 kg
1232282.15 kg
1232271.91 kg
-PTFEweight
PP / steelflange DIN EN 1092
> data sheet no.: 330056 - 2013/06/04All rights for technical modifications withheld8ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d20 - d63]
Actuator variant DA body PVDF
635040322520d(mm)sizepressure range 504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)101010101010PN(bar)
ident No.sealingdiaphragmConnection
1231236.75 kg
1231226.30 kg
1231213.02 kg
1231202.89 kg
1231191.31 kg
1231181.30 kg
FPMPTFEweight
PVDFsocket end DIN ISO
644466.15 kg
644456.00 kg
644442.72 kg
644432.62 kg
644421.21 kg
644411.18 kg
-PTFEweight
PVDFspigot end DIN ISO
1231707.10 kg
1231697.44 kg
1231683.42 kg
1231673.40 kg
1231661.85 kg
1231651.61 kg
-PTFEweight
PP / steelflange DIN EN 1092
9All rights for technical modifications withheld> data sheet no.: 330056 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d20 - d63]
dimensions
635040322520d(mm)504032252015DN(mm)
21 1/21 1/413/41/2DN(inch)
dimensions(mm)
181717151412bPP/PVC-U1917.517.515.514.513bPVDF
11911992927272B414141414141CDA/NO414129292929CNC181818141414d2
16515014011510595D1078779665646D1PP987972585041D1PVC-U
1098978645747D1PVDF988776f
1/41/41/41/41/41/4G404040262626h
155155139139113113HDA/NO207207175175136136HNC125110100857565K230200180160150130L224194174154144124L118415413411610890L219016014012211496L3244207181158146125L4PP266222192166152128L4PVC-U248210184162150128L4PVDFM8M8M8M6M6M6M192192152152122122N302623211916tPP/PVDF383126221916tPVC-U454545262626w
444444z
> data sheet no.: 330056 - 2013/06/04All rights for technical modifications withheld10ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d20 - d63]
Actuator variant NC body PVC-U
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)666PN(bar)
ident No.sealingdiaphragmConnection
11976843292113623-EPDMPVC-Uspigot end DIN ISO 143910
25.50 kg14390915.50 kg
14390815.00 kg
-PTFEweight
122868122867122866-EPDMGFRflange DIN EN 1092 143913
27.62 kg14391217.12 kg
14391116.34 kg
-PTFEweight
Actuator variant NO body PVC-U
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)666PN(bar)
ident No.sealingdiaphragmConnection
45662119782119781-EPDMPVC-Uspigot end DIN ISO 143916
25.00 kg14391516.00 kg
14391416.00 kg
-PTFEweight
122888122887122886-EPDMGFRflange DIN EN 1092 143919
27.12 kg14391817.62 kg
14391717.34 kg
-PTFEweight
11All rights for technical modifications withheld> data sheet no.: 330056 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d75 - d110]
Actuator variant DA body PVC-U
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)666PN(bar)
ident No.sealingdiaphragmConnection
117697110692119794-EPDMPVC-Uspigot end DIN ISO 143922
25.00 kg14392116.00 kg
14392016.00 kg
-PTFEweight
122908122907122906-EPDMGFRflange DIN EN 1092 143925
27.12 kg14392417.62 kg
14392317.34 kg
-PTFEweight
Actuator variant NC body PP
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)666PN(bar)
ident No.sealingdiaphragmConnection
119727119128111961-EPDMPPspigot end DIN ISO 143937
25.00 kg14393615.00 kg
14393514.50 kg
-PTFEweight
122997122996122995-EPDMGFRflange DIN EN 1092 143940
27.10 kg14393916.63 kg
14393815.87 kg
-PTFEweight
> data sheet no.: 330056 - 2013/06/04All rights for technical modifications withheld12ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d75 - d110]
Actuator variant NO body PP
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)666PN(bar)
ident No.sealingdiaphragmConnection
119785111962119127-EPDMPPspigot end DIN ISO 143943
25.00 kg14394216.00 kg
14394116.00 kg
-PTFEweight
123017123016123015-EPDMGFRflange DIN EN 1092 143946
26.60 kg14394517.13 kg
14394416.87 kg
-PTFEweight
Actuator variant DA body PP
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)666PN(bar)
ident No.sealingdiaphragmConnection
119798119797119796-EPDMPPspigot end DIN ISO 143949
25.00 kg14394816.00 kg
14394716.00 kg
-PTFEweight
123027123026123025-EPDMGFRflange DIN EN 1092 143952
26.60 kg14395117.13 kg
14395016.87 kg
-PTFEweight
Actuator variant NC body PVDF
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)666PN(bar)
ident No.sealingdiaphragmConnection
14395526.00 kg
14395416.00 kg
14395315.50 kg
-PTFEweight
PVDFspigot end DIN ISO
14395829.76 kg
14395719.23 kg
14395618.13 kg
-PTFEweight
PP / steelflange DIN EN 1092
13All rights for technical modifications withheld> data sheet no.: 330056 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d75 - d110]
Actuator variant NO body PVDF
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)666PN(bar)
ident No.sealingdiaphragmConnection
14396125.00 kg
14396016.00 kg
14395916.00 kg
-PTFEweight
PVDFspigot end DIN ISO
14396429.26 kg
14396319.73 kg
14396219.13 kg
-PTFEweight
PP / steelflange DIN EN 1092
Actuator variant DA body PVDF
1109075d(mm)sizepressure range 1008065DN(mm)
432 1/2DN(inch)666PN(bar)
ident No.sealingdiaphragmConnection
14396725.00 kg
14396616.00 kg
14396516.00 kg
-PTFEweight
PVDFspigot end DIN ISO
14397029.26 kg
14396919.73 kg
14396819.13 kg
-PTFEweight
PP / steelflange DIN EN 1092
> data sheet no.: 330056 - 2013/06/04All rights for technical modifications withheld14ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d75 - d110]
dimensions
1109075d(mm)1008065DN(mm)
432 1/2DN(inch)
dimensions(mm)
202018bPP/PVC-U222119bPVDF181818d2
220200185D1/41/41/4G645555h
330305305HDA/NO355325325HNC180160145K350310290L340300284L1M12M12M12M258258258N41.53833.5tPP/PVDF
615244tPVC-U120100100w
884z
15All rights for technical modifications withheld> data sheet no.: 330056 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic, [d75 - d110]
Item OverviewMV 310, normally closed (NC), without lift limit
designationquantitypositionhousing/body11diaphragm12actuator bottom part13.1actuator upper part13.2pressure piece13.3actuator rod13.4diaphragm disc23.5diaphragm13.6indicator cap13.7adjustment screw13.8pressure spring13.9pressure spring13.10socket head cap screw8/123.11circlip13.14hexagon nut13.15O-ring13.18washer44hexagon bolt45union nut27union end28O-ring29
MV 310, normally closed (NC), with lift limit
designationquantitypositionhousing/body11diaphragm12actuator bottom part13.1actuator upper part13.2pressure piece13.3diaphragm disc13.5diaphragm13.6indicator cap13.7adjustment screw13.8pressure spring13.9pressure spring13.10socket head cap screw8/123.11circlip13.12washer13.13circlip13.14hexagon nut13.15hexagon bolt13.30hexagon nut13.31cone13.32screw13.33hexagon nut13.34washer44hexagon bolt45union nut27union end28O-ring29
> data sheet no.: 330056 - 2013/06/04All rights for technical modifications withheld16ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic
MV 310, normally open (NO)
designationquantitypositionvalve body11diaphragm12actuator bottom part13.1actuator upper part13.2pressure piece13.3actuator rod13.4diaphragm disc23.5diaphragm13.6indicator cap13.7adjustment screw13.8pressure spring13.9socket head cap screw8/103.12washer8/103.13circlip13.14hexagon nut13.15O-ring13.16O-ring13.17O-ring13.18O-ring13.19indicator pin13.20Plug13.21washer44hexagon bolt45union nut27union end28O-ring29
MV 310, double acting (DA)
designationquantitypositionvalve body11diaphragm12actuator bottom part13.1actuator upper part13.2pressure piece13.3actuator rod13.4diaphragm disc23.5diaphragm13.6indicator cap13.7adjustment screw13.8socket head cap screw8/103.12washer8/103.13circlip13.14hexagon nut13.15O-ring13.16O-ring13.17O-ring13.18O-ring13.19indicator pin13.20washer44hexagon bolt45union nut27union end28O-ring29
17All rights for technical modifications withheld> data sheet no.: 330056 - 2013/06/04ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic
> data sheet no.: 330056 - 2013/06/04All rights for technical modifications withheld18ASV Stübbe GmbH & Co. KG · Hollwieser Str. 5 · D-32602 Vlotho · Tel. +49(0)5733. 799-0 · Fax +49(0)5733. 799-5000 · [email protected] · www.asv-stuebbe.de
Diaphragm Valve MV 310, pneumatic