Download - DRIPNET PC REAL PRESSURE COMPENSATING
THINWALL DRIPLINE
REAL PRESSURE COMPENSATING TECHNOLOGY TO IRRIGATE ROW CROPS WITH UNDULATING TERRAIN
PRODUCT ADVANTAGES � Pressure compensating dripline delivers precise flows
anywhere in the field. � Undulating terrain, large fields with long rows (up to
50% longer, when compared to turbulent drip tape) receive exact amounts of water - from the first to the last dripper in the row.
� Wide regulation pressure range from 6 to 36 psi. � Match the soil’s infiltration rates with a wide range of
flows, tubing size and dripper spacing. � Water and nutrients are available to a larger volume of
the crop’s root zone.
DRIPNET PC™
INDUSTRY’S WIDEST FLOW PATHAllows particles through short flow path.
INJECTION MOLDED DRIPPERSMade of high quality polyethylene material and welded into a wall of
seamless tubing - prevents dripper damage during installation and
distortion of the flow path even as the tubing stretches and expands.
UNIQUE FLAP OUTLET TECHNOLOGYDuring start-up opens to provide uninterrupted flow and at shut-down closes to prevent soil ingestion and root intrusion.
Improves dripper performance with expanded tooth pattern maximizing flow path area allowing debris to pass easily through the dripper.
LARGEST DRIPPER INLET FILTER AREA
Prevents penetration of dirt particles into
the dripper.
HIGH QUALITYPOLYETHYLENETUBING
ANTI-SIPHON MECHANISM OPTIONSeals the dripper outlet at system shut-down, blocking debris from entering the dripline after irrigation.
CHEMICAL RESISTANT MOLDED SILICON SELF-FLUSHING, SELF-ADJUSTING DIAPHRAGMMovement maintains a constant pressure differential within the water passage resulting in a uniform flow rate under a wide pressure range and varying water quality.
DRIPNET PC SERIES � 13 mil and 13.5 mil - multi-seasonal,
durable surface and subsurface use � 15 mil and 18 mil - multi-seasonal,
subsurface use (not recommended for surface use)
� 25 mil - where higher pressures are needed to overcome severe undulation in large fields with long runs
� 990 Series - an additional internal diameter choice to meet challenging runs and improve emission uniformity
OUTLET RECOMMENDATIONS � 636 and 875 Series 13, 13.5, 15 and 25 mil -
drilled outlet for surface applications � 636 and 875 Series 13, 13.5 and 15 mil - flap
and/or anti-siphon feature for subsurface applications
� 990 Series 18 and 25 mil - drilled outlet with anti-siphon feature
SPECIFICATIONS Inside diameter: 0.636”, 0.875”, 0.990” Nominal flow rates (GPH): 0.16, 0.26, 0.32, 0.42 Common spacings: 8”, 12”, 18”, 24”, 30 Regulating pressure range: 6-36 psi (maximum operating pressure is determined
by tubing I.D. and wall thickness) Recommended filtration: 120 mesh
TWO ORANGE STRIPES
TECHNOLOGY
LOOK FOR THEORANGE STRIPES
TECHNICAL INFORMATION
WALLTHICKNESS
636 SERIES 13 MIL636 SERIES 15 MIL636 SERIES 25 MIL875 SERIES 13.5 MIL875 SERIES 15 MIL875 SERIES 25 MIL990 SERIES 18 MIL990 SERIES 25 MIL
OPERATING(psi)2632412226362429
FLUSHING(psi)3948613339543643
MAXIMUM PRESSURE RANGESFLOW RATE VS. PRESSURE
0 20 22 24181614121084
.45
.40
.35
.30
.25
.20
.15
.10
.05
0
PRESSURE (psi)
FLOW
(GPH
)
0.42GPH
0.26GPH
0.32GPH
0.16GPH
PACKAGING DATAWALL
THICKNESS
PACKAGING DATA: Uses 22.5” x 13.5” cardboard reels with 1 5/8” hub hole. Weights are approximate. Pallet weight includes 45 lbs. for weight of pallet. Reels per pallet and pallet weights listed are for standard reel lengths only. Length of reels and reels per pallet may change for custom reel lengths.Call Netafim USA Customer Service for 990 Series 18 and 25 mil reel lengths and weights.
636 SERIES 13 MILNON ANTI-SIPHON636 SERIES 13 MILWITH ANTI-SIPHON636 SERIES 15 MILNON ANTI-SIPHON636 SERIES 15 MILWITH ANTI-SIPHON636 SERIES 25 MILNON ANTI-SIPHON636 SERIES 25 MILWITH ANTI-SIPHON875 SERIES 13.5 MILNON ANTI-SIPHON875 SERIES 13.5 MILWITH ANTI-SIPHON875 SERIES 15 MILNON ANTI-SIPHON875 SERIES 15 MILWITH ANTI-SIPHON875 SERIES 25 MILNON ANTI-SIPHON875 SERIES 25 MILWITH ANTI-SIPHON990 SERIES 18 MILWITH ANTI-SIPHON990 SERIES 25 MILWITH ANTI-SIPHON
REELLENGTH
REELWEIGHT
REELS PER PALLET
PALLET WEIGHT
4,000’4,000’3,700’3,700’3,200’3,600’3,000’3,200’2,460’2,600’2,460‘2,600’3,300’3,600’3,200’3,500’2,700‘3’000’2,500’2,800’1,480’1,640’1,480’1,640’CALLCALLCALLCALL
47 LBS.50 LBS.44 LBS.47 LBS.44 LBS.50 LBS.42 LBS.44 LBS.52 LBS.55 LBS.51 LBS.54 LBS.54 LBS.59 LBS.53 LBS.58 LBS.51 LBS.56 LBS.47 LBS.53 LBS.44 LBS.49 LBS.43 LBS.48 LBS.CALLCALLCALLCALL
12121212121212121212121212121212121212121212121212121212
609 LBS.645 LBS.573 LBS.609 LBS.573 LBS.645 LBS.549 LBS.573 LBS.669 LBS.705 LBS.657 LBS.693 LBS.693 LBS.753 LBS.681 LBS.741 LBS.657 LBS.717 LBS.609 LBS.681 LBS.573 LBS.633 LBS.561 LBS.621 LBS.
CALLCALLCALLCALL
DRIPPERSPACING
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
< 12”12” & >
1 5/8”WIDTH OF CORE
CORE SHAFT HOLE
HEIGHT(10” OR 13.5”)
DIAMETER (22 1/2”)
4 3/4”
LENGTH OF RUN CHARTSNOTE: Information contained in these Length of Run Charts represents single lateral uniformities only. For further detail regarding block and system uniformity, please contact your Irrigation Design Professional.
DRIPNET PC 636 SERIES - 13 MILLENGTH OF RUN @ 0% SLOPE - 96.8% EU
DRIPPERSPACING
8”12”18”24”30”
INLET PRESSURE (psi)
610845
1,1551,4301,685
16650905
1,2351,5251,795
18685955
1,3001,6101,895
20510710970
1,2001,410
12565785
1,0701,3251,555
14
0.16 GPH DRIPPER
0.26 GPH DRIPPER 8”12”18”24”30”
440610835
1,0301,210
465650885
1,1001,295
495685935
1,1601,365
365510695860
1,010
405565770950
1,120
0.32 GPH DRIPPER 8”12”18”24”30”
390540740915
1,075
415580790980
1,150
440610835
1,0301,215
330455620765900
365500685850995
0.42 GPH DRIPPER 8”12”18”24”30”
320445610760895
345475655810955
360505690855
1,005
270375510635745
300415565700825
DRIPPERSPACING
8”12”18”24”30”
INLET PRESSURE (psi)
650900
1,2351,5251,795
18720
1,0001,3651,6901,990
22775
1,0801,4751,8302,150
26445615840
1,0401,225
10565785
1,0701,3251,555
14
0.16 GPH DRIPPER
0.26 GPH DRIPPER8”12”18”24”30”
465650885
1,1001,295
515715985
1,2151,430
555775
1,0601,3151,550
320440605745880
405565770950
1,120
0.32 GPH DRIPPER8”12”18”24”30”
415580790980
1,150
460640875
1,0801,270
495690945
1,1701,375
285395540665780
365500685850995
0.42 GPH DRIPPER8”12”18”24”30”
345475655810955
380525725895
1,055
410570785970
1,145
235325445550645
300415565700825
DRIPNET PC 636 SERIES - 15 MILLENGTH OF RUN @ 0% SLOPE - 96.8% EU
DRIPPERSPACING
8”12”18”24”30”
INLET PRESSURE (psi)
7501,0401,4201,7602,070
24825
1,1501,5751,9502,295
30895
1,2451,7052,1102,485
365107109701,201,405
12
0.16 GPH DRIPPER
650900
1,2351,5251,795
18
0.26 GPH DRIPPER8”12”18”24”30”
535745
1,0251,2701,495
595825
1,1351,4051,655
640895
1,2251,5201,790
365510695860
1,010
465650885
1,1001,295
0.32 GPH DRIPPER8”12”18”24”30”
480665910
1,1301,325
530735
1,0101,2501,470
570795
1,0901,3501,590
330455620765900
415580790980
1,150
0.42 GPH DRIPPER8”12”18”24”30”
395550755935
1,100
435610835
1,0351,220
470665905
1,1201,320
270375510635745
345475655810955
DRIPNET PC 636 SERIES - 25 MILLENGTH OF RUN @ 0% SLOPE - 96.8% EU
DRIPPERSPACING
8”12”18”24”30”
INLET PRESSURE (psi)
9451,2901,7352,1302,490
121,0451,4251,9252,3602,760
141,1301,5452,0802,5552,985
16645875
1,1801,4501,695
8820
1,1201,5051,8452,160
10
0.16 GPH DRIPPER
0.26 GPH DRIPPER8”12”18”24”30”
680930
1,2501,5351,795
7501,0301,3851,7001,990
8151,1101,5001,8402,155
465630850
1,0401,220
590805
1,0851,3301,555
0.32 GPH DRIPPER8”12”18”24”30”
605825
1,1151,3701,595
670915
1,2351,5151,770
725990
1,3351,6401,915
415560755925
1,080
525715965
1,1851,380
0.42 GPH DRIPPER8”12”18”24”30”
500685925
1,1351,325
555755
1,0251,2551,470
600820
1,1051,3601,590
340465625765895
435595800980
1,145
DRIPNET PC 875 SERIES - 13.5 MILLENGTH OF RUN @ 0% SLOPE - 96.8% EU
NETAFIM USA5470 E. Home Ave.Fresno, CA 93727CS 888 638 2346www.netafimusa.com
DNPCSRS 05/18
LENGTH OF RUN CHARTSNOTE: Information contained in these Length of Run Charts represents single lateral uniformities only. For further detail regarding block and system uniformity, please contact your Irrigation Design Professional.
DRIPPERSPACING
8”12”18”24”30”
INLET PRESSURE (psi)
1,1301,5452,0802,5552,985
161,2051,6452,2202,7253,190
181,2701,7402,3452,8803,370
20945
1,2901,7352,1302,490
121,0451,4251,9252,3602,760
14
0.16 GPH DRIPPER
0.26 GPH DRIPPER8”12”18”24”30”
8151,1101,5001,8402,155
8651,1851,6001,9652,300
9151,2501,6902,0802,430
680930
1,2501,5351,795
7501,0301,3851,7001,990
0.32 GPH DRIPPER8”12”18”24”30”
725990
1,3351,6401,915
7701,0551,4251,7502,045
8151,1151,5051,8502,160
605825
1,1151,3701,595
670915
1,2351,5151,770
0.42 GPH DRIPPER8”12”18”24”30”
600820
1,1051,3601,590
640875
1,1801,4501,700
675925
1,2501,5351,795
500685925
1,1351,325
555755
1,0251,2551,470
DRIPNET PC 875 SERIES - 15 MILLENGTH OF RUN @ 0% SLOPE - 96.8% EU
DRIPPERSPACING
8”12”18”24”30”
INLET PRESSURE (psi)
1,6902,2352,9303,5454,105
181,8302,4203,1753,8404,445
211,9552,5853,3904,1054,750
241,3201,7402,2852,7653,200
121,5252,0152,6403,1953,700
15
0.16 GPH DRIPPER
0.26 GPH DRIPPER8”12”18”24”30”
1,2201,6152,1202,5602,965
1,3251,7502,2952,7803,215
1,4151,8652,4502,9653,435
9551,2601,6501,9952,310
1,1001,4551,9102,3102,675
0.32 GPH DRIPPER8”12”18”24”30”
1,0901,4351,8852,2802,640
1,1801,5552,0452,4702,860
1,2601,6602,1802,6403,055
8501,1201,4701,7752,055
9801,2951,7002,0552,380
0.42 GPH DRIPPER8”12”18”24”30”
9001,1951,5651,8952,195
9751,2951,7002,0552,380
1,0451,3801,8152,1952,540
705930
1,2201,4751,710
8151,0751,4101,7101,980
DRIPNET PC 990 SERIES - 18 MILLENGTH OF RUN @ 0% SLOPE - 96.8% EU
DRIPPERSPACING
8”12”18”24”30”
INLET PRESSURE (psi)
1,2401,6952,2852,8053,280
191,3901,9002,5653,1503,685
241,5152,0702,8003,4404,020
29740
1,0101,3601,6701,955
91,0451,4251,9252,3602,760
14
0.16 GPH DRIPPER
0.26 GPH DRIPPER8”12”18”24”30”
8901,2201,6452,0252,365
1,0001,3701,8502,2752,660
1,0901,4902,0202,4802,905
535725980
1,2001,405
7501,0301,3851,7001,990
0.32 GPH DRIPPER8”12”18”24”30”
7951,0851,4651,8002,105
8901,2201,6452,0202,365
9701,3301,7952,2102,580
475650870
1,0701,250
670915
1,2351,5151,770
0.42 GPH DRIPPER8”12”18”24”30”
655900
1,2151,4951,750
7351,0101,3651,6801,965
8001,1001,4901,8302,145
390535720885
1,035
555755
1,0251,2551,470
DRIPNET PC 875 SERIES - 25 MILLENGTH OF RUN @ 0% SLOPE - 96.8% EU
DRIPPERSPACING
8”12”18”24”30”
INLET PRESSURE (psi)
1,7402,2953,0153,6454,220
191,9552,5803,3904,1004,750
242,1352,8203,7054,4805,185
291,0301,3551,7802,1552,500
91,4601,9302,5303,0603,545
14
0.16 GPH DRIPPER
0.26 GPH DRIPPER8”12”18”24”30”
1,2551,6602,1802,6353,055
1,4101,8652,4502,9653,435
1,5402,0402,6803,2403,750
745980
1,2851,5551,800
1,0551,3951,8302,2102,560
0.32 GPH DRIPPER8”12”18”24”30”
1,1201,4801,9402,3452,715
1,2601,6602,1802,6403,055
1,3751,8152,3852,8853,340
665875
1,1451,3851,600
9401,2401,6301,9702,280
0.42 GPH DRIPPER8”12”18”24”30”
9301,2251,6151,9502,260
1,0451,3801,8102,1952,540
1,1401,5051,9802,3952,775
550725950
1,1501,330
7801,0301,3551,6351,895
DRIPNET PC 990 SERIES - 25 MILLENGTH OF RUN @ 0% SLOPE - 96.8% EU