SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
6 - 25 - 20 4500 12 - 4 - 17 45DLC-1
DRUM LOUVER • HIGH CAPACITYINDUSTRIAL SUPPLY GRILLES • ALUMINUMMODELS: 45DLC1 & 45DLC2 SPIRAL DUCT MOUNT
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Dimensions are in inches (mm).
FELT SEAL ADJUSTABLE VANES 5/16" (8)
OVE
RAL
L H
EIG
HT
VAR
IES
BY D
UC
T SI
ZE
B C
DUCT OPENING = LISTED WIDTH + 1 1/4" (32)OVERALL WIDTH = LISTED WIDTH + 3 1/16" (78)
1 3/8" (35)TYP.
GASKETAROUND FRAME
D = MIN./MAX. DUCT DIAMETER
DU
CT
OPE
NIN
G =
LIS
TED
H +
1/2
" (13
)
3 1/4"(83)
OPTIONALPOLE
OPERATOR
AE
OPTIONALDEX
CENTRAL DIVIDER(MODEL 45DLC2 ONLY)
30°
30°
DESCRIPTION:1. Material: Aluminum.
2. Models 45DLC1/45DLC2 are designed to handle large air capacities and provide long throws. It is ideally suited for applications where ductwork cannot be brought close to the occupants in large conditioned spaces such as; shopping malls, industrial plants and stadiums.
3. Curved frame installs directly on spiral ducts without the use of duct taps.
4. Length of throw, direction and horizontal spread can be controlled by means of the rotating drum and pivoted adjustable vanes.
5. Felt seal around drum minimizes air leakage and holds drum secure in selected position.
6. 45DLC2 Spli t Vane option al lows bi-directional horizontal throw.
7. Standard finish is AW Appliance white.
OPTIONS:o OBD Opposed Blade Damper
o DEX Damper/Extractor (Air Scoop)
o PB Pole Operator
Finish:o AL Aluminum
o MI Mill
o SP Special ________ .
o 45DLC1 Adjustable Vanes o 45DLC2 Split Vanes
Height 6 10 12 15
W x H No. of Vanes W x H No. of Vanes W x H No. of Vanes W x H No. of Vanes9 x 6 2 18 x 10 2 18 x 12 2 18 x 15 212 x 6 3 24 x 10 3 24 x 12 3 24 x 15 315 x 6 4 30 x 10 4 30 x 12 4 30 x 15 418 x 6 5 36 x 10 5 36 x 12 5 36 x 15 524 x 6 7 42 x 10 6 42 x 12 6 42 x 15 630 x 6 9 48 x 10 7 48 x 12 7 48 x 15 736 x 6 11 54 x 10 8 54 x 12 8 54 x 15 848 x 6 15 60 x 10 9 60 x 12 9 60 x 15 954 x 6 17 – – – – – –60 x 6 19 – – – – – –
List
ed S
izes
Nom
inal
Wid
th x
Hei
ght
in In
ches
AVAILABLE SIZES AND DIMENSIONAL DATA
A 2 3/4 (70) 4 1/2 (114) 5 1/2 (140) 7 (178)B 3 3/8 (86) 5 3/8 (137) 6 3/8 (162) 9 3/8 (238)C 3 (76) 6 (152) 6 (152) 6 (152)D 10 – 60 (254 – 1524) 14 – 60 (356 – 1524) 16 – 60 (406 – 1524) 20 – 60 (508 – 1524)E 5 (127) 8 1/8 (206) 9 9/16 (243) 11 9/16 (294)Di
men
sion
sin
Inch
es
(mm
)
SCHEDULE TYPE
PROJECT
ENGINEERCONTRACTOR
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 22 - 11 5100C 4 - 12 - 11 5100C-1
ALUMINUM CURVED SPIRAL DUCT GRILLESTRUE FULL RADIUS DESIGNSINGLE DEFLECTION • ADJUSTABLE BLADESMODELS: 51SHC AND 51SVC
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Dimensions are in inches (mm).
NOM.HEIGHT
+1 3/4"(44)
5/16" (8)
NOM.HEIGHT- 1/4" (6)
NOM. WIDTH + 1 1/2" (38) 2 1/2"(64)
NOM. WIDTH - 1/4" (6)
1 3/8"(35)
OPTIONALDAMPER /EXTRACTOR
FRONT VIEW
PLAN VIEW
AIRFLOW
AIRFLOW
51SHC 51SVC
1. Nailor’s unique curved spiral duct grille design offers an architecturallysuperior appearance and saves installation time and money by directlymounting to the duct and hence eliminating the need to fabricate stand-off saddles for standard grilles.
2. Construction: Unique architectural single piece aluminum frame designis rolled to match required duct radius, eliminating unsightly non-alignedbutted corners. A single set of extruded aluminum "teardrop" blades on3/4" (19) centers provide air control in a single plane. Individuallyadjustable blades are friction pivoted to ensure positive positioning whenadjusted to desired deflection setting.
3. A thick foam gasket is provided as standard to ensure a tight seal to duct.4. Standard fastening is Type A screw holes.5. Standard finish is AW Appliance White.
Options:❑ DEX Damper/Extractor* (Air scoop) (For supply air applications).Finish:❑ AL Aluminum.❑ MI Mill.❑ SP Special. Specify _______________________.
Grille Width Grille Duct DiameterMin. - Max. Height Min. - Max.
10 – 48 (254 – 1219) 3 (76) 6 – 36 (152 – 914)10 – 48 (254 – 1219) 4 (102) 6 – 36 (152 – 914)10 – 48 (254 – 1219) 6 (152) 8 – 36 (203 – 914)10 – 48 (254 – 1219) 8 (203) 10 – 36 (254 – 914)10 – 48 (254 – 1219) 10 (254) 12 – 36 (305 – 914)12 – 36 (305 – 914) 12 (305) 14 – 36 (356 – 914)
Available Sizes
Duct diameters in even sizes only. Grillesavailable in nominal 1" (25) increments in width.
* Opening = Nominal + 1/4" (6) with DEXDamper/Extractor option.
Important:Grilles are custom fabricated to fit only a singlespecified duct diameter.
❑ MODEL 51SHCSingle Deflection Horizontal Blades
❑ MODEL 51SVCSingle Deflection Vertical Blades
DESCRIPTION:
*
*
SCHEDULE TYPE
PROJECT
ENGINEERCONTRACTOR
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 22 - 11 5100C 4 - 12 - 11 5100C-2
ALUMINUM CURVED SPIRAL DUCT GRILLESTRUE FULL RADIUS DESIGNDOUBLE DEFLECTION • ADJUSTABLE BLADESMODELS: 51DHC AND 51DVC
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Dimensions are in inches (mm).
NOM.HEIGHT
+1 3/4"(44)
5/16" (8)
NOM.HEIGHT- 1/4" (6)
NOM. WIDTH + 1 1/2" (38)
51DHC 51DVC
2 1/2"(64)
FRONT VIEW
PLAN VIEW
AIRFLOW
AIRFLOW
NOM. WIDTH - 1/4" (6)
1 3/8"(35)
OPTIONALDAMPER /EXTRACTOR
1. Nailor’s unique curved spiral duct grille design offers an architecturallysuperior appearance and saves installation time and money by directlymounting to the duct and hence eliminating the need to fabricate stand-off saddles for standard grilles.
2. Construction: Unique architectural single piece aluminum frame designis rolled to match required duct radius, eliminating unsightly non-alignedbutted corners. Two sets of perpendicular extruded aluminum "teardrop"blades on 3/4" (19) centers provide air control in two planes. Individuallyadjustable blades are friction pivoted to ensure positive positioning whenadjusted to desired deflection setting.
3. A thick foam gasket is provided as standard to ensure a tight seal to duct.4. Standard fastening is Type A screw holes.5. Standard finish is AW Appliance White.
Options:❑ DEX Damper/Extractor* (Air scoop) (For supply air applications).Finish:❑ AL Aluminum.❑ MI Mill.❑ SP Special. Specify _______________________.
Grille Width Grille Duct DiameterMin. - Max. Height Min. - Max.
10 – 48 (254 – 1219) 3 (76) 6 – 36 (152 – 914)10 – 48 (254 – 1219) 4 (102) 6 – 36 (152 – 914)10 – 48 (254 – 1219) 6 (152) 8 – 36 (203 – 914)10 – 48 (254 – 1219) 8 (203) 10 – 36 (254 – 914)10 – 48 (254 – 1219) 10 (254) 12 – 36 (305 – 914)12 – 36 (305 – 914) 12 (305) 14 – 36 (356 – 914)
Available Sizes
❑ MODEL 51DHCDouble Deflection Horizontal Front Blades
❑ MODEL 51DVCDouble Deflection Vertical Front Blades
DESCRIPTION:
Duct diameters in even sizes only. Grillesavailable in nominal 1" (25) increments in width.
* Opening = Nominal + 1/4" (6) with DEXDamper/Extractor option.
Important:Grilles are custom fabricated to fit only a singlespecified duct diameter.
*
*
SCHEDULE TYPE
PROJECT
ENGINEERCONTRACTOR
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 29 - 11 6100C 4 - 12 - 11 6100C-1
STEEL CURVED SPIRAL DUCT GRILLESTRUE FULL RADIUS DESIGNSINGLE DEFLECTION • ADJUSTABLE BLADESMODELS: 61SHC AND 61SVC
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Dimensions are in inches (mm).
NOM.HEIGHT
+1 3/4"(44)
5/16" (8)
NOM.HEIGHT- 1/4" (6)
NOM. WIDTH + 1 1/2" (38) 2 1/2"(64)
NOM. WIDTH - 1/4" (6)
1 3/8"(35)
OPTIONALDAMPER /EXTRACTOR
FRONT VIEW
PLAN VIEW
AIRFLOW
AIRFLOW
61SHC 61SVC
1. Nailor’s unique curved spiral duct grille design offers an architecturallysuperior appearance and saves installation time and money by directlymounting to the duct and hence eliminating the need to fabricate stand-off saddles for standard grilles.
2. Construction: Unique arcitectural single piece corrosion-resistant steelframe design is rolled to match required duct radius, eliminatingunsightly non-aligned butted corners. A single set of "teardrop" bladeson 3/4" (19) centers provide air control in a single plane. Individuallyadjustable blades are friction pivoted to ensure positive positioning whenadjusted to desired deflection setting.
3. A thick foam gasket is provided as standard to ensure a tight seal to duct.
4. Standard fastening is Type A screw holes.
5. Standard finish is AW Appliance White.
Options:❑ DEX Damper/Extractor* (Air scoop) (For supply air applications).Finish:❑ AL Aluminum.❑ MI Mill.❑ SP Special. Specify _______________________.
Grille Width Grille Duct DiameterMin. - Max. Height Min. - Max.
10 – 48 (254 – 1219) 3 (76) 6 – 36 (152 – 914)10 – 48 (254 – 1219) 4 (102) 6 – 36 (152 – 914)10 – 48 (254 – 1219) 6 (152) 8 – 36 (203 – 914)10 – 48 (254 – 1219) 8 (203) 10 – 36 (254 – 914)10 – 48 (254 – 1219) 10 (254) 12 – 36 (305 – 914)12 – 36 (305 – 914) 12 (305) 14 – 36 (356 – 914)
Available Sizes
Duct diameters in even sizes only. Grillesavailable in nominal 1" (25) increments in width.
* Opening = Nominal + 1/4" (6) with DEXDamper/Extractor option.
Important:Grilles are custom fabricated to fit only a singlespecified duct diameter.
❑ MODEL 61SHCSingle Deflection Horizontal Blades
❑ MODEL 61SVCSingle Deflection Vertical Blades
DESCRIPTION:
*
*
SCHEDULE TYPE
PROJECT
ENGINEERCONTRACTOR
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 22 - 11 6100C 4 - 12 - 11 6100C-2
STEEL CURVED SPIRAL DUCT GRILLESTRUE FULL RADIUS DESIGNDOUBLE DEFLECTION • ADJUSTABLE BLADESMODELS: 61DHC AND 61DVC
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Dimensions are in inches (mm).
NOM.HEIGHT
+1 3/4"(44)
5/16" (8)
NOM.HEIGHT- 1/4" (6)
NOM. WIDTH + 1 1/2" (38)
61DHC 61DVC
2 1/2"(64)
FRONT VIEW
PLAN VIEW
AIRFLOW
AIRFLOW
NOM. WIDTH - 1/4" (6)
1 3/8"(35)
OPTIONALDAMPER /EXTRACTOR
1. Nailor’s unique curved spiral duct grille design offers an architecturallysuperior appearance and saves installation time and money by directlymounting to the duct and hence eliminating the need to fabricate stand-off saddles for standard grilles.
2. Construction: Unique arcitectural single piece corrosion-resistant steelframe design is rolled to match required duct radius, eliminatingunsightly non-aligned butted corners. Two sets of perpendicular"teardrop" blades on 3/4" (19) centers provide air control in two planes.Individually adjustable blades are friction pivoted to ensure positivepositioning when adjusted to desired deflection setting.
3. A thick foam gasket is provided as standard to ensure a tight seal to duct.
4. Standard fastening is Type A screw holes.
5. Standard finish is AW Appliance White.
Options:❑ DEX Damper/Extractor* (Air scoop) (For supply air applications).Finish:❑ AL Aluminum.❑ MI Mill.❑ SP Special. Specify _______________________.
Grille Width Grille Duct DiameterMin. - Max. Height Min. - Max.
10 – 48 (254 – 1219) 3 (76) 6 – 36 (152 – 914)10 – 48 (254 – 1219) 4 (102) 6 – 36 (152 – 914)10 – 48 (254 – 1219) 6 (152) 8 – 36 (203 – 914)10 – 48 (254 – 1219) 8 (203) 10 – 36 (254 – 914)10 – 48 (254 – 1219) 10 (254) 12 – 36 (305 – 914)12 – 36 (305 – 914) 12 (305) 14 – 36 (356 – 914)
Available Sizes
❑ MODEL 61DHCDouble Deflection Horizontal Front Blades
❑ MODEL 61DVCDouble Deflection Vertical Front Blades
DESCRIPTION:
Duct diameters in even sizes only. Grillesavailable in nominal 1" (25) increments in width.
* Opening = Nominal + 1/4" (6) with DEXDamper/Extractor option.
Important:Grilles are custom fabricated to fit only a singlespecified duct diameter.
*
*
SCHEDULE TYPE
PROJECT
ENGINEERCONTRACTOR
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 22 - 11 6100C 2 - 1 - 11 6100C-5
STEEL CURVED SPIRAL DUCT GRILLESTRUE FULL RADIUS DESIGNLINEAR SLOT FACEMODELS: 61L50C, 61L75C AND 61L10C
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Dimensions are in inches (mm).
NOM.WIDTH
+1 3/4"(44)
5/16" (8)
W
S
NOM. LENGTH + 1 1/2" (38) 3"(76)
NOM. LENGTH – 1/4" (6)
1 3/8"(35)
OPTIONALDAMPER /EXTRACTOR
DESCRIPTION:1. Nailor’s unique curved spiral duct grille design offers an
architecturally superior appearance and savesinstallation time and money by directly mounting to theduct and hence eliminating the need to fabricate stand-off saddles for standard grilles.
2. Construction: Unique corrosion resistant steel framedesign is rolled to match required duct radius. Extrudedaluminum "Wiper Blade" pattern controllers with gasketedge seal. The volume and direction of the dischargeair can be adjusted by moving the pattern controllers.
3. A thick foam gasket is provided as standard to ensure atight seal to duct.
4. Standard fastening is Type A screw holes.
5. Standard finish is AW Appliance White frame with blackpattern controllers.
Options:❑ DEX Damper/Extractor* (Air scoop)
(For supply air applications).Finish:❑ SP Special. Specify _______________________.
No. 61L50C 61L75C 61L10C
of S = 1/2" (13) S = 3/4" (19) S = 1" (25)
Slots W Duct Dia. W Duct Dia. W Duct Dia.Min. - Max. Min. - Max. Min. - Max.
1 1 3/4 6 - 36 2 6 - 36 2 1/4 6 - 36(44) (152-914) (51) (152-914) (57) (152-914)
2 3 6 - 36 3 1/2 6 - 36 4 6 - 36(76) (152-914) (89) (152-914) (102) (152-914)
3 4 1/4 8 - 36 5 8 - 36 5 3/4 8 - 36(108) (203-914) (127) (203-914) (146) (203-914)
4 5 1/2 8 - 36 6 1/2 10 - 36 7 1/2 10 - 36(140) (203-914) (165) (254-914) (191) (254-914)
Available Sizes
W = Nominal Width (duct opening)
* Opening = Nominal + 1/4" (6) with DEX Damper/Extractoroption.S = Slot WidthDuct diameters in even sizes only.
Important:Grilles are custom fabricated to fit only a single specified ductdiameter.
Available Slot Widths:❑ 61L50C 1/2" (13) Slot❑ 61L75C 3/4" (19) Slot❑ 61L10C 1" (25) Slot
Standard No. of Slots:1, 2, 3 or 4
Available Lengths:12" through 72"(nominal 1" increments only)
AIRFLOW
AIRFLOW
FRONT VIEW
PLAN VIEW
*
*
Standard and OptiOnal FiniSheS FOr GrilleS and diFFuSerS
Nailor offers a selection of standard colors and finishes available on our gril les, registers and dif fusers. For painted finishes, our state-of-the-art paint systems provide environmentally friendly finishing solutions with uniform coverage and coating thickness. The result is an exceptionally durable finish that resists scratching, corrosion and general wear. Additional facili t ies for special requirements, as well as a selection of anodized or brushed finishes, complete our ability to provide unmatched beauty and durability for any application.
POWDER COATNailor’s powder coat is a high-tech thermosetting polyester powder coating with superior physical properties that provide excellent color and gloss retention. The finish offers extreme durability and hardness that resists scratching, chipping and general wear. Surface preparation includes degreasing and a chemical cleaning followed by a clean rinse before a final powder coat finish is applied and baked. The environmentally friendly Nailor powder coat system assures uniform coverage and color consistency resulting in a long lasting superior finish. Colors, including simulated anodizing, which is far more economical than color anodizing, can be selected from Nailor’s standard color chart or non-standard colors and can be matched from sample chips provided to Nailor.
ELECTROCOATINGE-Coat is an environmentally friendly coating that provides complete coverage and a wide range of performance properties, formulated to meet corrosion, durability and other performance specifications. Electrocoating is a highly automated process in which paint is electrically deposited onto a metal foundation. Film build thickness is uniform and overall application efficiencies are in excess of 90%. Paint is consistent on all part-to-part surfaces, preventing sags, runs or drips. E-Coat offers flexibility, better first yield pass and quicker production times compared to other forms of paint applications. Electrocoating is an excellent solution that offers superior properties and uniform finish.
CLEAR ANODIZING (Aluminum products only)
Clear anodizing is a clear oxide coating that exemplifies an aluminum surface’s natural oxide coating producing a hard, scratch resistant surface that is resistant to general wear and mild chemicals. The process provides a natural looking, virtually maintenance free finish that will endure for many years.
COLOR ANODIZING (Aluminum products only)
Color anodizing is an electrolytic process where, after standard anodizing procedures, colored metallic pigments penetrate the oxide surface pores producing a corrosion resistant, colorfast finish. The process results in a natural metallic appearance that requires little maintenance.
BRUSHED AND CLEAR COATAvailable on specific aluminum products (consult applicable product page for availability). Surface is brushed to achieve a scratch finish texture before being degreased and chemically cleaned. A clear lacquer coating is then applied to provide a durable protective finish.
#4 BRUSHED SATIN POLISHED (Stainless Steel products only)
Surface is polished to ASTM A480 #4 standard to achieve a bright durable finish that is resistant to mild chemicals and corrosion. A final coating is not required due to the inherent anti-corrosion properties of the stainless steel.
PRIME COATPrime coat provides a stable base for painting in the field. Surface pretreatment includes degreasing and a chemical cleaning before an alkyd prime coat is applied. After a thorough cleaning for dust, etc. that can contaminate the final finish and cause premature flaking or peeling, finish coat should be field applied as soon as possible.
PAINT PREPARED ALUMINUM (Aluminum products only)
Allows for field applied paint. Surface preparation includes degreasing and a chemical cleaning followed by a clean rinse. Finish coat should be field applied as soon as possible.
MILL FINISHSurface is left untreated and requires cleaning, degreasing, etc. in the field before final finish can be applied if required.
NAILOR POWDER COAT PROPERTIES
ELECTROCOATING PROPERTIES
FILM THICKNESS 2.0 to 3.0 mils
HARDNESS 2 H
IMPACT RESISTANCE
Direct: 160 inch - lbs.Reverse 160 inch - lbs.
SALT SPRAY 1000 hours
FILM THICKNESS .8 to 1.2 mils
HARDNESS HB TO H
IMPACT RESISTANCE
80 inch - lbs
SALT SPRAY 100 hours
“Complete Air Control and Distribution Solutions.” www.nailor.com
Standard and OptiOnal FiniSheS FOr GrilleS and diFFuSerS
The following standard colors and finishes are available on applicable Nailor air distribution products. Consult individual product pages for availability
The pictured finishes have been represented as best as possible within printing limitations. However, actual finish may vary. Contact your Nailor representative for a color chip sample on the material specified for a more accurate representation.
DBK - Black (for registers ordered with factory mounted dampers) - BA - Perforated Diffusers (4300 series only) Appliance White (AW) face with black back pan and pattern controllers.
WGDSOF2015“Complete Air Control and Distribution Solutions.” www.nailor.com
F173
GRILLES A
ND
REG
ISTERS
F
DRUM LOUVERS
PERFORMANCE DATA:
MODEL SERIES: 45DLC SPIRAL DUCT DRUM LOUVER AND 45DL DRUM LOUVER • 10" (254)
SIZE Neck Velocity, FPMVelocity Pressure
270.005
400.012
536.018
670.028
800.040
940.055
1075.072
1340.112
1610.162
18 x 10
Airflow, CFMTotal PressureThrowNoise Criteria
336.02
15-20-32–
504.05
21-28-45–
672.08
26-35-52–
840.10
32-42-6426
1008.18
34-44-7433
1176.19
36-50-7839
1344.25
44-54-9044
1680.40
48-65-10052
2016.60
54-72-11060
24 x 10
Airflow, CFMTotal PressureThrowNoise Criteria
450.02
19-25-40–
675.05
25-35-52–
900.08
30-42-6421
1125.13
35-46-7430
1350.18
38-52-8034
1575.20
44-54-9443
1800.3
50-65-10048
2250.45
54-72-11058
2700.7
64-82-12563
30 x 10
Airflow, CFMTotal PressureThrowNoise Criteria
560.02
22-28-46–
840.05
29-40-62–
1120.08
36-50-8223
1400.13
42-55-8631
1680.18
46-62-9638
1960.24
50-68-10046
2240.31
54-72-11050
2800.48
65-82-13058
3360.7
72-92-14564
36 x 10
Airflow, CFMTotal PressureThrowNoise Criteria
670.02
23-32-52–
1005.04
30-43-68–
1340.08
36-50-8225
1675.13
44-60-10035
2010.18
50-68-10540
2345.25
56-76-11547
2680.32
60-80-12052
3350.48
70-90-14060
4020.70
80-115-18069
42 x 10
Airflow, CFMTotal PressureThrowNoise Criteria
785.02
25-34-54–
1177.05
32-45-70–
1570.08
40-54-8626
1962.13
46-62-10035
2355.19
54-72-11042
2748.26
60-80-12048
3140.34
66-86-14053
3925.52
75-100-15060
4710.75
88-115-18069
48 x 10
Airflow, CFMTotal PressureThrowNoise Criteria
895.02
26-34-58–
1342.04
33-48-73–
1790.08
43-58-9426
2238.13
53-74-10835
2685.17
56-76-11641
3133.24
60-80-12047
3580.32
66-90-14052
4475.48
78-105-15061
5370.68
90-110-18068
54 x 10
Airflow, CFMTotal PressureThrowNoise Criteria
1010.02
28-36-60–
1515.05
35-50-75–
2020.08
50-68-10027
2525.13
55-76-11035
3030.17
60-80-12042
3535.24
65-88-13548
4040.31
70-95-14553
5050.46
90-120-18061
6060.68
95-120-19068
60 x 10
Airflow, CFMTotal PressureThrowNoise Criteria
1120.02
28-36-60–
112005
40-54-72–
2240.08
50-68-10027
2800.13
58-76-12035
3360.17
65-84-13042
3920.23
70-92-14048
4480.30
78-100-15053
5600.46
90-120-18061
6720.68
100-13-19068
72 x 10
Airflow, CFMTotal PressureThrowNoise Criteria
1345.02
34-44-72–
2018.05
44-58-90–
2690.08
54-70-11028
3362.13
62-82-13037
4035.19
70-92-14044
4707.26
78-100-16048
5380.35
85-110-17054
6725.52
98-130-20063
8070.75
110-140-23070
Model Deflection TP Throw NC
45DL1 15°30°
x 1.5x 1.9
x .85x .73
+ 4+ 9
45DL20°
15°30°
x 1.3x 1.7x 2.2
—x .85x .73
—+4+9
Correction Factor
Performance Notes:1. All pressures are in inches w.g..
2. Throw values are given at 150, 100 and 50 fpm terminal velocities under isothermal conditions.
3. Total pressure, throw and Noise Criteria are based on 45DL1 at 0° deflection. Correction factors for other conditions are listed in the chart.
5. Noise Criteria (NC) values are based upon 10dB room absorption, re 10-12
watts. Dash (–) in space indicates an Noise Criteria of less than 15.
6. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006.
F174
GRIL
LES
AN
D R
EGIS
TERS
F
DRUM LOUVERS
PERFORMANCE DATA:
MODEL SERIES: 45DLC SPIRAL DUCT DRUM LOUVER AND 45DL DRUM LOUVER • 12" (305)
SIZE Neck Velocity, FPMVelocity Pressure
265.004
400.010
530.018
660.027
795.039
930.054
1060.070
1325.109
1600.160
18 x 12
Airflow, CFMTotal PressureThrowNoise Criteria
400.033
14-20-34–
600.08
19-27-46–
800.14
24-34-60–
1000.22
30-40-7025
1200.30
35-47-7832
1400.44
38-56-9536
1600.55
44-60-10040
2000.86
50-70-12047
24001.04
55-80-13052
24 x 12
Airflow, CFMTotal PressureThrowNoise Criteria
530.03
17-24-42–
795.07
24-34-54–
1060.13
26-37-64–
1325.20
35-47-7827
1590.29
38-56-9532
1855.42
45-65-11035
2120.53
52-72-12040
2650.82
65-85-14046
31801.10
72-98-16052
30 x 12
Airflow, CFMTotal PressureThrowNoise Criteria
665.03
18-25-44–
998.06
26-37-64–
1330.10
33-45-7621
1662.14
37-54-9027
1993.21
45-65-11032
2328.28
50-70-12038
2660.35
58-80-13040
3324.58
67-92-15548
3990.80
85-110-18054
36 x 12
Airflow, CFMTotal PressureThrowNoise Criteria
800.03
22-31-54–
1200.05
30-44-74–
1600.08
38-54-9022
2000.12
46-64-11028
2400.17
50-70-12034
2800.22
58-80-13538
3200.30
65-90-15042
4000.46
78-105-18050
4800.63
90-120-20055
42 x 12
Airflow, CFMTotal PressureThrowNoise Criteria
930.03
25-35-60–
1395.05
34-46-80–
1860.10
44-58-10026
2325.16
50-70-12031
2790.22
58-80-13035
3255.31
65-90-15041
3720.40
75-100-17045
4650.62
85-115-20052
5580.80
100-140-23055
48 x 12
Airflow, CFMTotal PressureThrowNoise Criteria
1065.03
25-33-53–
1598.06
35-46-80–
2130.08
44-56-9626
2663.14
52-70-11531
3195.20
58-78-12536
3728.28
60-98-15041
4260.36
75-100-17045
5326.56
88-120-21052
6390.80
100-140-23055
54 x 12
Airflow, CFMTotal PressureThrowNoise Criteria
1200.03
28-37-65–
1800.06
37-50-88–
2400.11
46-62-10824
3000.17
56-75-13031
3600.25
65-85-14536
4200.34
72-98-16041
4800.42
80-105-18045
6000.68
95-125-22052
7200.95
110-150-25055
60 x 12
Airflow, CFMTotal PressureThrowNoise Criteria
1350.03
28-37-65–
2025.06
42-56-100–
2700.11
47-63-11020
3375.17
54-74-13028
4050.22
64-84-15033
4725.30
72-100-17037
5400.38
80-110-19042
6750.58
92-120-24048
8100.83
110-140-26054
72 x 12
Airflow, CFMTotal PressureThrowNoise Criteria
1600.03
32-42-72–
2400.06
42-54-100–
3200.11
52-72-12025
4000.17
62-74-14031
4800.22
72-100-17036
9600.83
120-160-29055
6400.38
92-120-24045
8000.58
110-140-26052
9600.83
120-160-29055
Model Deflection TP Throw NC
45DL1 15°30°
x 1.5x 1.9
x .85x .73
+ 4+ 9
45DL20°
15°30°
x 1.3x 1.7x 2.2
—x .85x .73
—+4+9
Correction Factor
Performance Notes:1. All pressures are in inches w.g..
2. Throw values are given at 150, 100 and 50 fpm terminal velocities under isothermal conditions.
3. Total pressure, throw and Noise Criteria are based on 45DL1 at 0° deflection. Correction factors for other conditions are listed in the chart.
5. Noise Criteria (NC) values are based upon 10dB room absorption, re 10-12
watts. Dash (–) in space indicates an Noise Criteria of less than 15.
6. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006.
F175
GRILLES A
ND
REG
ISTERS
F
DRUM LOUVERS
PERFORMANCE DATA:
MODEL SERIES: 45DLC SPIRAL DUCT DRUM LOUVER AND 45DL DRUM LOUVER • 15" (381)
SIZE Neck Velocity, FPMVelocity Pressure
312.006
470.014
625.024
780.038
935.054
1090.074
1250.097
1560.152
1870.218
18 x 15
Airflow, CFMTotal PressureThrowNoise Criteria
585.02
15-21-36–
878.05
21-30-52–
1170.09
28-40-6722
1463.14
32-45-7528
1755.21
37-51-9433
2048.27
42-59-10038
2340.36
47-65-11042
2925.55
58-82-14049
3510.82
66-92-16054
24 x 15
Airflow, CFMTotal PressureThrowNoise Criteria
780.02
18-25-45–
1170.04
25-35-62–
1560.08
33-46-8022
1950.12
40-55-10028
2340.19
45-65-11034
2730.25
54-75-13039
3120.34
60-84-14043
3900.50
70-100-17050
4680.68
80-110-19055
30 x 15
Airflow, CFMTotal PressureThrowNoise Criteria
975.02
21-30-52–
1463.05
30-42-74–
1950.08
38-54-9722
2438.13
45-64-11029
2925.20
54-75-13035
3413.25
60-84-14040
3900.34
66-94-16044
4875.50
80-110-19051
5850.72
92-130-22556
36 x 15
Airflow, CFMTotal PressureThrowNoise Criteria
1170.025
23-33-58–
1755.05
32-45-80–
2340.10
40-56-10025
2925.15
47-65-11032
3510.20
56-76-13037
4095.26
62-88-15042
4680.36
70-100-17045
5850.55
80-110-19052
7020.78
110-130-22058
42 x 15
Airflow, CFMTotal PressureThrowNoise Criteria
1365.02
27-37-66–
2048.05
38-52-92–
2730.10
47-65-11025
3413.15
56-76-13031
4095.22
62-88-15036
4778.30
70-100-17041
5460.38
80-110-19044
6825.60
100-130-22051
8190.85
110-150-26057
48 x 15
Airflow, CFMTotal PressureThrowNoise Criteria
1565.02
28-40-70–
2348.05
40-55-100–
3130.08
50-70-12025
3913.13
60-82-14032
4695.18
70-98-16037
5478.25
80-110-19042
6260.33
90-130-22045
7825.50
110-150-26052
9390.8
120-180-30058
54 x 15
Airflow, CFMTotal PressureThrowNoise Criteria
1760.025
30-44-75–
2640.05
44-60-110–
3520.10
54-78-13026
4400.16
65-90-16032
5280.21
75-105-18037
6160.30
90-120-21042
7040.40
10-135-24045
8800.65
120-160-28052
10560.85
130-180-31058
60 x 15
Airflow, CFMTotal PressureThrowNoise Criteria
1950.02
34-45-76–
2925.045
44-60-110–
3900.08
54-78-13026
4875.12
65-90-16033
5850.17
75-105-18038
6825.25
90-120-21043
7800.30
10-135-24046
9750.50
120-160-28053
11700.75
130-180-31059
72 x 15
Airflow, CFMTotal PressureThrowNoise Criteria
2345.02
37-50-90–
3518.05
50-70-120–
4690.10
62-88-16027
5863.14
76-100-19034
7035.20
90-125-22039
8208.26
100-140-25044
9380.33
115-150-28047
11725.55
130-190-33054
14070.80
160-220-40060
Model Deflection TP Throw NC
45DL1 15°30°
x 1.5x 1.9
x .85x .73
+ 4+ 9
45DL20°
15°30°
x 1.3x 1.7x 2.2
—x .85x .73
—+4+9
Correction Factor
Performance Notes:1. All pressures are in inches w.g..
2. Throw values are given at 150, 100 and 50 fpm terminal velocities under isothermal conditions.
3. Total pressure, throw and Noise Criteria are based on 45DL1 at 0° deflection. Correction factors for other conditions are listed in the chart.
5. Noise Criteria (NC) values are based upon 10dB room absorption, re 10-12
watts. Dash (–) in space indicates an Noise Criteria of less than 15.
6. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006.
F172
GRIL
LES
AN
D R
EGIS
TERS
F
DRUM LOUVERS
PERFORMANCE DATA:
MODEL SERIES: 45DLC SPIRAL DUCT DRUM LOUVER AND 45DL DRUM LOUVER • 6" (152)
SIZE Neck Velocity, FPMVelocity Pressure
280.005
420.011
560.020
700.031
840.044
980.060
1120.078
1400.122
1680.176
9 x 6
Airflow, CFMTotal PressureThrowNoise Criteria
105.022
7-10-18–
158.06
10-14-24–
210.10
13-18-30–
263.16
15-21-3522
315.21
17-23-4027
368.30
20-28-4632
420.40
22-30-5036
525.60
26-35-5641
630.90
30-40-6646
12 x 6
Airflow, CFMTotal PressureThrowNoise Criteria
140.03
8-11-18–
210.06
12-16-27–
280.10
16-21-34–
350.16
18-24-4023
420.23
20-26-4528
490.32
23-31-5033
560.40
25-34-5537
700.63
30-40-6642
840.90
35-47-7647
18 x 6
Airflow, CFMTotal PressureThrowNoise Criteria
210.022
12-16-27–
315.06
17-22-36–
420.10
21-27-45–
525.16
25-32-5224
630.24
28-37-6229
735.33
31-42-7034
840.40
34-46-7638
1050.60
42-54-9043
1260.90
48-62-10149
24 x 6
Airflow, CFMTotal PressureThrowNoise Criteria
280.03
16-21-33–
420.06
21-28-44–
560.10
26-33-54–
700.16
31-40-6426
840.24
35-45-7231
980.32
38-50-8036
1120.40
42-52-8840
1400.63
48-64-10047
168.90
52-71-11052
30 x 6
Airflow, CFMTotal PressureThrowNoise Criteria
350.022
19-24-38–
525.06
25-32-50–
700.10
30-38-6020
875.16
35-45-7027
1050.21
39-50-7832
1225.32
43-56-8637
1400.40
47-60-9441
1750.63
54-70-10048
210.90
60-78-12053
36 x 6
Airflow, CFMTotal PressureThrowNoise Criteria
420.03
20-26-40–
630.06
26-35-54–
840.10
32-41-6421
1050.16
36-46-7428
1260.22
40-52-8233
1470.30
44-55-9038
1680.40
48-62-10042
2100.60
54-72-11549
2520.90
62-80-13055
48 x 6
Airflow, CFMTotal PressureThrowNoise Criteria
565.03
24-31-39–
848.06
31-42-63–
1130.10
37-49-7622
1412.16
44-56-8929
1695.24
48-62-10034
1978.32
50-70-11039
2260.40
58-74-12043
2825.63
65-82-13050
3390.90
74-95-15056
60 x 6
Airflow, CFMTotal PressureThrowNoise Criteria
700.03
28-36-54–
1050.06
34-46-66–
1400.10
43-55-8423
1750.16
49-63-9630
2100.24
52-70-11035
2450.32
60-75-12040
2800.40
65-82-13044
3500.63
75-90-15051
4200.90
84-105-17057
Performance Notes:1. All pressures are in inches w.g..
2. Throw values are given at 150, 100 and 50 fpm terminal velocities under isothermal conditions.
3. Total pressure, throw and Noise Criteria are based on 45DL1 at 0° deflection. Correction factors for other conditions are listed in the chart.
5. Noise Criteria (NC) values are based upon 10dB room absorption, re 10-12
watts. Dash (–) in space indicates an Noise Criteria of less than 15.
6. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006.
Model Deflection TP Throw NC
45DL1 15°30°
x 1.5x 1.9
x .85x .73
+ 4+ 9
45DL20°
15°30°
x 1.3x 1.7x 2.2
—x .85x .73
—+4+9
Correction Factor
F58
GRIL
LES
AN
D R
EGIS
TERS
F
CURVED SPIRAL DUCT GRILLES
For performance data notes, see F60.
ListedDuctSize
(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
Core VelocityVelocity Pressure
300.006
400.010
500.016
600.022
700.031
800.040
1000.062
1200.090
1400.122
TotalPressure
0°22 1/2°45°
.013
.015
.023
.023
.026
.040
.036
.041
.063
.052
.060
.091
.071
.082
.125
.093
.107
.164
.145
.167
.254
.209
.241
.367
.285
.328
.499
10 x 3 0.15
CFMNoise Criteria
45–
60–
75–
90–
10518
12022
15028
18034
21039
.14
.12
.10Throw
0°22 1/2°45°
3-4-82-3-62-2-4
4-5-93-4-72-3-5
5-6-114-5-93-3-6
6-8-135-6-103-4-7
7-10-146-8-114-5-7
8-11-156-9-124-6-8
9-12-167-10-135-6-8
11-13-189-10-146-7-9
11-14-199-11-156-7-10
12 x 3 0.19
CFMNoise Criteria
57–
76–
95–
114–
13319
15223
19029
22835
26640
.14
.12
.10Throw
0°22 1/2°45°
4-5-93-4-72-3-5
5-6-114-5-93-4-6
6-8-134-7-103-4-6
7-10-146-8-114-5-7
8-11-156-8-124-6-8
8-11-167-9-134-6-8
11-13-188-10-146-6-9
11-14-199-11-156-7-10
12-15-2110-12-176-8-11
10 x 4 14 x 3 0.22
CFMNoise Criteria
66–
88–
110–
132–
15419
17623
22029
16435
30841
.14
.12
.10Throw
0°22 1/2°45°
4-5-103-4-82-3-5
5-7-124-6-103-4-6
6-9-135-7-103-5-7
7-10-156-8-124-5-8
8-11-166-9-134-6-8
9-12-177-10-145-6-9
11-14-199-11-156-7-10
12-15-2010-12-166-8-10
13-16-2210-13-187-8-11
12 x 4 16 x 3 0.27
CFMNoise Criteria
81–
108–
135–
16215
18920
21624
27030
32436
37841
.18
.16
.14Throw
0°22 1/2°45°
4-6-113-4-82-3-6
6-8-134-7-103-4-6
7-10-146-8-114-5-7
8-11-166-9-134-6-8
9-13-187-10-145-6-9
11-13-198-11-156-7-10
12-15-2110-12-176-8-11
13-16-2210-13-186-8-11
13-17-2511-13-207-8-13
18 x 3 0.29
CFMNoise Criteria
87–
116–
145–
17416
20321
23225
29031
34837
40642
.18
.16
.14Throw
0°22 1/2°45°
4-6-123-5-102-3-6
6-9-145-7-113-5-7
7-11-156-9-124-6-8
8-12-176-10-144-6-9
10-13-198-10-155-7-10
12-14-2010-11-166-7-10
13-16-2210-13-187-8-11
14-17-2411-14-197-9-12
14-18-2611-14-217-9-13
20 x 3 10 x 614 x 4
0.32
CFMNoise Criteria
96–
128–
160–
19216
22421
25625
32031
38437
44842
.24
.21
.18Throw
0°22 1/2°45°
4-6-134-5-102-4-6
6-9-155-7-124-5-8
7-11-176-9-134-6-8
8-13-187-11-154-7-9
11-14-208-11-156-7-10
12-15-2110-12-176-8-11
14-16-2311-13-187-8-12
15-18-2512-14-208-9-13
15-19-2713-15-228-10-14
16 x 4 22 x 3 0.36
CFMNoise Criteria
108–
144–
180–
21617
25222
28826
36032
43238
50443
.26
.22
.20Throw
0°22 1/2°45°
4-6-134-5-112-4-7
6-10-155-8-134-5-8
8-11-186-9-144-6-9
9-13-197-11-155-7-10
11-15-209-12-166-8-11
13-15-2210-13-186-8-11
13-17-2411-13-197-8-12
15-18-2612-15-218-9-13
16-20-2813-15-228-10-14
12 x 6 18 x 424 x 3
0.42
CFMNoise Criteria
126–
168–
210–
25217
29422
33626
42032
50438
58843
.29
.25
.22Throw
0°22 1/2°45°
4-6-134-5-112-4-7
6-10-155-8-134-5-8
8-11-186-9-144-6-9
9-13-197-11-155-7-10
11-15-219-12-176-8-11
13-15-2210-13-186-8-11
13-17-2411-13-197-8-12
15-20-2712-15-218-10-13
16-20-2913-16-238-11-15
20 x 4 28 x 3 0.45
CFMNoise Criteria
135–
180–
225–
27018
31523
36026
45032
54039
63043
.34
.30
.26Throw
0°22 1/2°45°
4-7-143-6-112-4-7
6-10-155-8-123-5-8
8-12-176-10-144-6-9
10-13-188-10-145-7-9
11-14-199-11-156-7-10
11-15-229-12-186-8-11
13-17-2410-14-197-9-12
15-18-2512-14-208-9-13
6-20-2813-16-228-10-14
14 x 6 10 x 822 x 4
0.50
CFMNoise Criteria
150–
200–
250–
30018
35023
40027
50033
60039
70044
.34
.30
.26Throw
0°22 1/2°45°
4-8-144-6-112-4-7
7-11-166-8-134-6-8
8-13-187-10-144-6-9
11-14-208-11-156-7-10
11-15-229-13-186-8-11
13-16-2311-13-187-8-12
15-18-2512-14-208-9-13
16-20-2813-15-228-10-14
18-22-3014-18-249-11-15
12 x 816 x 624 x 432 x 3
0.58
CFMNoise Criteria
174–
232–
290–
34819
40624
46428
58034
69640
81245
.39
.34
.30Throw
0°22 1/2°45°
5-8-154-6-123-4-8
7-11-176-8-134-6-8
8-13-197-11-154-7-10
11-15-218-12-176-8-11
12-16-2210-13-186-8-11
14-17-2411-13-197-8-12
15-19-2713-15-218-10-13
17-21-2913-17-248-11-15
18-22-3215-18-259-11-16
10 x 10 26 x 434 x 3
0.61
CFMNoise Criteria
183–
244–
305–
36619
42724
48828
61034
73240
85445
.41
.36
.31Throw
0°22 1/2°45°
5-8-154-6-123-4-8
7-11-176-9-134-6-8
9-13-207-11-155-7-10
11-15-219-12-176-8-12
12-16-2210-13-186-8-11
14-17-2511-13-207-8-13
16-20-2713-15-228-10-14
17-21-3013-17-248-11-15
19-22-3215-18-2610-11-16
PERFORMANCE DATA:
CURVED SPIRAL DUCT SUPPLY GRILLES • 6100C/5100C SERIES
MODELS: 61DVC, 61DHC, 61SVC, 61SHC, 51DVC, 51DHC, 51SVC, 51SHC
2-18-2020
F59
GRILLES A
ND
REG
ISTERS
F
CURVED SPIRAL DUCT GRILLES
For performance data notes, see F60.
ListedDuctSize
(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
Core VelocityVelocity Pressure
300.006
400.010
500.016
600.022
700.031
800.040
1000.062
1200.090
1400.122
TotalPressure
0°22 1/2°45°
.013
.015
.023
.023
.026
.040
.036
.041
.063
.052
.060
.091
.071
.082
.125
.093
.107
.164
.145
.167
.254
.209
.241
.367
.285
.328
.499
18 x 6
14 x 828 x 430 x 436 x 3
0.65
CFMNoise Criteria
195–
260–
32515
39020
45525
52029
65035
78041
91046
.44
.38
.33Throw
0°22 1/2°45°
5-8-154-7-133-4-8
8-11-186-9-144-6-9
9-14-207-11-165-7-11
11-15-229-13-186-8-11
13-17-2410-13-196-8-12
15-18-2512-14-208-9-13
17-20-2813-16-228-11-14
18-22-3214-18-259-11-16
20-24-3415-19-2710-12-17
12 x 10 20 x 630 x 4
0.74
CFMNoise Criteria
222–
296–
37015
44420
51825
59229
74035
88841
103646
.50
.44
.38Throw
0°22 1/2°45°
6-9-174-7-133-5-8
8-12-196-10-154-6-10
10-15-228-12-185-8-11
12-17-2310-13-186-8-12
14-18-2511-15-207-9-13
15-19-2713-15-228-10-14
18-22-3014-18-249-11-15
19-23-3415-18-2710-12-17
21-25-3617-20-2911-13-18
22 x 6 16 x 834 x 4
0.80
CFMNoise Criteria
240–
320–
40016
48021
56026
64030
80036
96042
112047
.54
.47
.41Throw
0°22 1/2°45°
6-9-124-7-143-5-9
8-13-206-10-154-6-10
11-15-228-13-186-8-11
13-18-2510-14-206-9-13
14-19-2711-15-217-10-13
16-20-2913-15-238-10-15
18-22-3215-18-259-11-16
20-25-3515-20-2810-13-18
22-27-3718-21-2911-13-19
12 x 12
14 x 1018 x 824 x 636 x 4
0.90
CFMNoise Criteria
270–
360–
45016
54021
63026
72030
90036
108042
126047
.61
.53
.46Throw
0°22 1/2°45°
6-10-185-8-154-5-9
8-13-207-10-164-6-11
11-16-238-13-186-8-12
13-18-2510-15-206-9-13
15-19-2712-15-228-10-14
17-20-2913-16-248-11-15
19-23-3315-18-2710-12-17
20-25-3616-20-2911-13-18
22-27-3918-22-3211-14-20
18 x 10 30 x 6 1.13
CFMNoise Criteria
339–
452–
56517
67822
79127
90431
113037
135643
158248
.77
.67
.58Throw
0°22 1/2°45°
6-11-205-8-164-6-11
10-14-238-11-185-7-12
12-18-2510-14-206-9-13
14-20-2811-16-227-11-14
17-21-3013-17-248-11-15
19-23-3215-18-2610-12-16
21-25-3617-20-2911-13-18
23-28-4018-22-3212-14-20
25-30-4320-24-3413-15-22
24 x 8
16 x 1220 x 1024 x 834 x 6
1.20
CFMNoise Criteria
360–
480–
60017
72022
84027
96031
120037
144043
168048
.84
.73
.64Throw
0°22 1/2°45°
8-13-236-10-184-6-12
11-18-279-14-226-9-14
14-20-2911-16-247-11-15
17-23-3313-18-278-12-17
19-25-3615-20-2910-13-18
22-27-3818-22-3011-14-19
25-29-4220-24-3413-15-21
27-33-4622-27-3714-17-23
29-36-5023-29-4015-18-25
18 x 1222 x 1028 x 836 x 6
1.37
CFMNoise Criteria
411–
548–
68518
82223
95928
109632
137038
164444
191849
.93
.81
.71Throw
0°22 1/2°45°
8-13-236-10-184-6-12
11-18-279-14-226-9-14
14-21-3011-17-247-11-15
17-23-3313-18-278-12-17
20-25-3615-20-2910-13-18
22-27-3818-22-3011-14-19
25-30-4320-24-3413-15-22
27-33-4722-27-3814-17-24
29-36-5023-29-4115-18-25
24 x 10 20 x 1230 x 8
1.52
CFMNoise Criteria
456–
608–
76018
91223
106428
121632
152038
182444
212849
1.03.90.78
Throw0°22 1/2°45°
8-13-257-11-204-7-13
11-18-299-14-236-9-15
15-22-3212-18-258-11-16
18-25-3514-20-289-13-18
20-27-3716-21-2911-13-19
24-29-4019-23-3212-15-20
26-32-4521-25-3613-16-22
29-35-4923-28-3915-18-25
30-37-5324-29-4315-19-27
32 x 8 22 x 1226 x 10
1.61
CFMNoise Criteria
483–
644–
80518
96623
112728
128832
161038
193244
225449
1.12.97.84
Throw0°22 1/2°45°
8-14-267-11-214-7-13
12-18-2910-15-246-9-15
15-22-3313-18-278-11-17
18-26-3615-21-299-13-18
22-28-3918-22-3211-14-20
25-29-4120-24-3313-15-21
27-33-4722-27-3814-17-24
29-36-5124-29-4115-18-26
32-39-5526-32-4416-20-28
24 x 12 30 x 1036 x 8
1.85
CFMNoise Criteria
555–
740–
92519
111024
129529
148033
185039
222045
259050
1.261.09.95
Throw0°22 1/2°45°
8-14-277-11-214-7-13
13-19-3110-15-256-10-15
15-23-3413-18-278-12-17
19-27-3815-21-3010-13-19
22-28-4118-22-3211-14-20
25-31-4320-25-3513-15-22
28-34-4822-27-3914-17-25
31-38-5325-30-4315-19-27
34-41-5727-32-4617-20-29
32 x 10 28 x 12 2.04
CFMNoise Criteria
612–
816–
102019
122424
142829
163233
204039
244845
285650
1.431.241.08
Throw0°22 1/2°45°
9-15-287-12-225-8-14
13-20-3311-16-277-11-17
17-25-3613-20-298-13-18
20-28-4016-22-3211-14-20
23-30-4318-24-3512-15-22
27-33-4621-27-3713-17-23
29-36-5224-29-4115-18-26
33-40-5727-32-4617-20-29
35-43-6128-35-4918-22-31
30 x 12 36 x 10 2.32
CFMNoise Criteria
696–
928–
116020
139225
162430
185634
232040
278446
324851
1.581.371.19
Throw0°22 1/2°45°
10-16-308-13-245-8-15
15-22-3513-18-288-11-18
18-27-3915-22-329-14-20
22-30-4318-24-3411-15-22
25-33-4720-27-3813-17-24
29-35-5023-28-4015-18-25
32-37-5522-32-4416-20-28
35-43-6028-34-4818-22-30
38-47-6630-38-5319-24-33
PERFORMANCE DATA:
CURVED SPIRAL DUCT SUPPLY GRILLES • 6100C/5100C SERIES
MODELS: 61DVC, 61DHC, 61SVC, 61SHC, 51DVC, 51DHC, 51SVC, 51SHC
2-18-2020
F60
GRIL
LES
AN
D R
EGIS
TERS
F
CURVED SPIRAL DUCT GRILLES
ListedDuctSize
(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
Core VelocityVelocity Pressure
300.006
400.010
500.016
600.022
700.031
800.040
1000.062
1200.090
1400.122
TotalPressure
0°22 1/2°45°
.013
.015
.023
.023
.026
.040
.036
.041
.063
.052
.060
.091
.071
.082
.125
.093
.107
.164
.145
.167
.254
.209
.241
.367
.285
.328
.499
32 x 12 38 x 10 2.48
CFMNoise Criteria
744–
992–
1240–
1488–
1736–
1984–
2480–
2976–
3472–
1.701.481.29
Throw0°22 1/2°45°
10-17-328-13-255-8-16
15-22-3613-18-298-11-18
19-28-4115-22-3210-14-20
22-32-4518-25-3611-16-22
26-34-4821-27-3813-18-24
30-36-5224-29-4215-18-26
34-41-5727-32-4617-20-29
36-45-6329-36-5018-22-32
39-48-6832-38-5520-24-34
40 x 10 2.56
CFMNoise Criteria
768–
1024–
128020
153625
179230
204834
256040
307246
358451
1.771.541.34
Throw0°22 1/2°45°
11-17-328-13-266-8-16
15-22-3713-18-298-11-19
19-29-4115-23-3310-15-21
22-32-4618-26-3611-16-23
27-35-4921-28-3913-18-25
31-37-5325-29-4215-19-27
34-41-5927-33-4718-21-29
37-46-6429-36-5219-23-32
41-49-6932-39-5520-25-35
36 x 12 44 x 10 2.79
CFMNoise Criteria
837–
1116–
139520
167425
195330
223234
279040
334846
390651
1.901.651.44
Throw0°22 1/2°45°
11-18-348-14-276-9-17
16-24-3913-19-318-12-20
20-29-4315-24-3410-15-22
24-34-4819-27-3812-17-24
28-36-5122-29-4114-18-26
32-39-5425-31-4316-20-27
34-43-6028-34-4818-22-30
39-48-6731-38-5320-30-34
41-51-7233-41-5721-26-36
48 x 10 3.08
CFMNoise Criteria
924–
1232–
154021
184826
215631
246435
308041
369647
431252
2.161.871.63
Throw0°22 1/2°45°
12-19-3510-15-286-10-18
17-25-4113-20-328-13-20
20-32-4616-25-3611-16-23
25-35-5020-28-4013-18-25
29-38-5424-30-4315-19-27
33-41-5727-32-4617-20-29
37-46-6429-36-5219-23-32
41-50-7132-40-5720-25-36
43-54-7635-43-6122-27-39
Performance Notes:1. All pressures are in inches w.g..
2. Core Velocity is in feet per minute.
3. Performance data is based on double deflection grille without damper/extractor.
4. 0°, 22 1/2° and 45° represent vertical blade deflection angles and horizontal spread.
5. Throw values are given for terminal velocities of 150, 100 and 50 fpm under isothermal conditions, direct duct mounted grille, exposed duct with no ceiling effect.
6. Noise Criteria (NC) values are based upon 10dB room absorption, re 10-12 watts @ 0° deflection. Dash (–) in space indicates an Noise Criteria of less than 15.
7. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006.
Blade Deflection 0° 22 1/2° 45°
Double Deflection Factor x 2.00 x 2.08 x 2.23
Single Deflection Factor x 1.83 x 1.91 x 2.13
TP Correction Factors for Grilles With Damper/ Extractor set at 45 degrees.
ModelType
Damper/Extractor
Blade Deflection
0° 22 1/2° 45°
DoubleDeflection
With + 5 + 7 + 12
Without 0 + 2 + 7
SingleDeflection
With + 1 + 3 + 10
Without – 4 – 2 + 5
NC Corrections for Blade Deflection and Damper/Extractor set at 45 degrees (add).
PERFORMANCE DATA:
CURVED SPIRAL DUCT SUPPLY GRILLES • 6100C/5100C SERIES
MODELS: 61DVC, 61DHC, 61SVC, 61SHC, 51DVC, 51DHC, 51SVC, 51SHC
2-18-2020
F68
GRIL
LES
AN
D R
EGIS
TERS
F
CURVED SPIRAL DUCT GRILLES
PERFORMANCE DATA:
CURVED SPIRAL DUCT LINEAR SLOT • "WIPER BLADE" PATTERN CONTROLLERS
MODEL: 61L50C • 1/2" (13) SLOT WIDTH
Model 61L75C • 3/4" (19) Slot Width
Performance Notes:1. All pressures are in inches w.g..2. Horizontal throws are given at 150, 100 and 50 fpm terminal velocities under isothermal conditions. Exposed duct (no ceiling effect).3. Horizontal throws are based on the same direction of all slots. Pattern controllers set in upright (non-directing) position.
4. Throw values are based on a 4 ft. section. For other lengths, use the correction factors table above.5. Noise Criteria (NC) values are based on a room absorption of 10 dB, re 10-12 watts. Dash (–) in space denotes a NC level of less than 15.
6. Noise Criteria are based on a 4 ft. section, horizontal throw. For other lengths, use the correction factors table above.7. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006.
1 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
5.003
–1-1-2
10.014
–2-3-6
15.027
–3-5-9
20.051
–4-6-11
25.08316
4-6-12
30.11621
4-7-13
35.15825
5-7-14
40.21528
5-8-15
2 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
10.003
–1-2-3
20.014
–2-4-7
30.027
–4-6-12
40.051
–5-7-14
50.08318
5-8-15
60.11624
6-9-17
70.15828
6-9-18
80.21531
7-10-20
3 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
15.003
–1-2-4
30.14–
3-5-10
45.027
–5-8-15
60.05116
6-9-18
75.08321
7-11-21
90.11626
7-11-22
105.15830
9-13-25
120.21533
8-12-23
4 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
20.003
–2-3-6
40.014
–4-6-11
60.027
–5-8-16
80.05117
7-10-20
100.08322
7-11-22
120.11627
8-12-24
140.15831
9-13-26
160.21534
10-15-29
Length (ft.) 2 3 4 5 6
Supply - 3 - 1 0 + 1 + 2
Return 0 + 2 + 3 + 3 + 4
NC Correction Factors for Various Lengths
1 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
5.003
–1-1-2
10.012
–2-3-6
20.026
–3-5-10
25.042
–4-6-12
30.06516
4-7-13
35.09220
5-7-14
40.12523
5-8-15
50.17428
5-8-16
2 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
10.003
–1-2-3
20.012
–3-4-8
40.026
–4-6-11
50.042
–5-8-15
60.06519
6-9-18
70.09223
7-10-20
80.12526
7-11-21
100.17431
7-11-22
3 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
15.003
–2-3-6
30.12–
3-5-10
60.026
–5-8-15
75.04216
6-10-19
90.06521
7-10-20
105.09225
8-12-24
120.12528
9-13-25
150.17433
9-14-27
4 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
20.003
–2-3-5
40.012
–4-6-11
80.026
–6-9-18
100.04217
7-11-21
120.06522
9-13-25
140.09226
9-14-27
160.12529
10-15-30
200.17434
11-16-31
MODEL: 61L75C • 3/4" (19) SLOT WIDTH
Length (ft.) 2 3 4 5 6
Multiplier 0.70 0.85 1.0 1.125 1.25
Throw Correction Factors for Various Lengths
F69
GRILLES A
ND
REG
ISTERS
F
CURVED SPIRAL DUCT GRILLES
Airflow, CFM per Ft. 15 30 45 60 75 90 105 120 Static Pressure .003 .014 .027 .051 .083 .116 .158 .215 3 Slot NC — — — 16 21 26 30 33 Throw 1-2-4 3-5-10 5-8-15 6-9-18 7-11-21 7-11-22 9-13-25 8-12-23
Airflow, CFM per Ft. 10 20 30 40 50 60 70 80 Static Pressure .003 .014 .027 .051 .083 .116 .158 .215 2 Slot NC — — — — 18 24 28 31 Throw 1-2-3 2-4-7 4-6-12 5-7-14 5-8-15 6-9-17 6-9-18 7-10-20
Airflow, CFM per Ft. 5 10 15 20 25 30 35 40 Static Pressure .003 .014 .027 .051 .083 .116 .158 .215 1 Slot NC — — — — 16 21 25 28 Throw 1-1-2 2-3-6 3-5-9 4-6-11 4-6-12 4-7-13 5-7-14 5-8-15
Airflow, CFM per Ft. 20 40 60 80 100 120 140 160 Static Pressure .003 .014 .027 .051 .083 .116 .158 .215 4 Slot NC — — — 17 22 27 31 34 Throw 2-3-6 4-6-11 5-8-16 7-10-20 7-11-22 8-12-24 9-13-26 10-15-29
PERFORMANCE DATA:
CURVED SPIRAL DUCT LINEAR SLOT • "WIPER BLADE" PATTERN CONTROLLERS
MODEL: 61L10C • 1" (25) SLOT WIDTH
Length (ft.) 2 3 4 5 6
Supply - 3 - 1 0 + 1 + 2
Return 0 + 2 + 3 + 3 + 4
NC Correction Factors for Various Lengths
1 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
10.002
–1-1-2
15.009
–3-4-8
25.024
–4-6-12
30.038
–4-7-13
40.05719
5-8-15
50.08224
5-8-16
55.11327
6-9-17
65.14831
6-9-18
2 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
20.002
–1-2-4
30.009
–3-5-10
50.024
–5-8-16
60.03815
6-10-19
80.05722
7-10-20
100.08227
7-11-21
110.11330
8-12-23
130.14834
9-13-25
3 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
30.002
–2-3-6
45.009
–4-6-11
75.024
–6-9-18
90.03817
7-11-22
120.05724
9-13-25
150.08229
9-14-27
165.11332
10-15-30
195.14836
11-16-31
4 Slot
Airflow, CFM per Ft.Static PressureNoise CriteriaThrow
40.002
–2-4-7
60.009
–4-7-13
100.024
–7-11-21
120.03819
9-13-26
160.05725
10-15-29
200.08230
10-15-30
220.11333
12-17-34
260.14837
12-18-36
Length (ft.) 2 3 4 5 6
Multiplier 0.70 0.85 1.0 1.125 1.25
Throw Correction Factors for Various Lengths
Performance Notes:1. All pressures are in inches w.g..2. Horizontal throws are given at 150, 100 and 50 fpm terminal velocities under isothermal conditions. Exposed duct (no ceiling effect).3. Horizontal throws are based on the same direction of all slots. Pattern controllers set in upright (non-directing) position.
4. Throw values are based on a 4 ft. section. For other lengths, use the correction factors table above.5. Noise Criteria (NC) values are based on a room absorption of 10 dB, re 10-12 watts. Dash (–) in space denotes a NC level of less than 15.
6. Noise Criteria are based on a 4 ft. section, horizontal throw. For other lengths, use the correction factors table above.7. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006.