w w w.buehlermotor.com
fas t fo r ward so lu t ions
Electric | Hybrid | Conventional
3 Thermal Management
3 Transmission
3 All-Wheel Drive
3 Vacuum
3 Emission Reduction
for future mobility
Drives and Electric
Pumps
Switch
AudiOpel Porsche
Wabco
GeelyGM
Seat
Hella
Borg WarnerContinental
Eaton
EberspächerSkoda
Getrag
Great Wall Motors
Plastic Omnium
KiaHyundai
Mercedes-Benz
VW GAC
Magna
Cummins
BMW
Webasto
f as t fo r ward so lu t ions
w w w.buehlermotor.com1
Eberspächer
Fast Forward Solutions
… to the challenges of the automotive industry:
3 Power
3 Efficiency
3 Durability
3 Installation space
3 Sound level
3 Temperature
3 Emissions
3 EMC
Bühler Motor provides solutions that are optimally adapted for your own specific requirements: From the customized DC motor to the complete system with motors, actuators, gears or pumps – prepared ready for installation, including sensors, electronics and software.
Fast Forward Solutions
… für die Herausforderungen der Automobilindustrie:
3 Leistung
3 Effizienz
3 Haltbarkeit
3 Bauraum
3 Geräusch
3 Temperatur
3 Emission
3 EMV
Bühler Motor steht für optimal an Ihre ganz speziellen Anforde-rungen angepasste Lösungen: Vom maßgeschneiderten Gleich-strommotor bis zum kompletten System mit Motor, Aktuatorik, Getriebe oder Pumpe – einbaufertig vorbereitet inklusiveSensorik, Elektronik und Software.
Chihuahua, MX
Morrisville, US
Detroit, US
We speak Automotive
Strong enough to meet the toughest challenges:
3 11 locations on 3 continents
3 More than 1,750 employees worldwide
3 More than 200 engineers
3 More than 20 million units per year
Stark genug für große Herausforderungen:
3 11 Standorte auf 3 Kontinenten
3 Mehr als 1.750 Mitarbeiter weltweit
3 Mehr als 200 Ingenieure
3 Mehr als 20 Millionen Einheiten pro Jahr
2
SegmentThermal & EmissionsDr. Sven Urlaub
Thermal Management, Emission Reduction and Combustion Improvement
Segment DrivetrainHerwig Moser
Transmission, Torque Management and Body Applications
Global Sales & Marketing AutomotiveAndreas Harbauer
Global Sales, Future Automotive Markets and Marketing
Morrisville, US
Nuremberg, DEMonheim, DE
Hradec Králové, CZ
Shanghai, CN
Hong Kong, CN
Zhuhai, CN
Detroit, US
Yokohama, JP
w w w.buehlermotor.com
We speak Automotive
Fast and Flexible
With our own capabilities: advanced engineering, prototype sample shop and test centers, Bühler Motor is perfectly posi-tioned to deliver even the largest projects consistently within a tight time and cost framework.
Schnell und Flexibel
Mit eigenen Ressourcen in der Grundlagenentwicklung, im Musterbau und eigenen Testcentern ist Bühler Motor gut auf-gestellt, um auch größte Projekte sicher und in einem engen Zeit- und Kostenrahmen zu realisieren.
Lifecycle Management
From the beginning, Research and Development, Manufactu-ring Planning, Quality Management, Sales and Purchasing are critical parts of the team. From the start of the project to the end of production, you always have one responsible partner you can contact.
Lifecycle Management
Von Anfang an sitzen Forschung und Entwicklung, Fertigungs-planung, Qualitäts management, Vertrieb und Einkauf mit am Tisch. Vom Anfang des Projekts bis zum „End of Production“ gibt es für Sie immer einen verantwortlichen Ansprechpartner.
f as t fo r ward so lu t ions
3
Headquarters
Production Plants
Tech Center
Sales Office
Uhldingen-Mühlhofen, DE
4
Fast and safe to SOP
System ExpertiseSystemkompetenz
Immersing ourselves in our customers' systems and applica-tions is one of our greatest strengths.
Our Advanced Engineering division allows us to anticipate future development needs within our target markets, independent of customer projects, and develop viable solutions.
Tief in die Systeme und Applikationen unserer Kundeneinzutauchen, gehört zu unseren größten Stärken.
Unsere Vorentwicklung erlaubt es uns, unabhängig von Kundenprojekten zukünftige Anforderungen in unseren Zielmärkten vorauszudenken und dafür tragfähige Lösungen zu entwickeln.
f as t fo r ward so lu t ions
w w w.buehlermotor.com5
System ExpertiseSystemkompetenz
As a result, we are able to offer our customers complete systems with motors, actuators, gears and pumps along with proper electronics, sensors and software from one source.
So sind wir in der Lage unseren Kunden komplette Systeme mit Motoren, Aktuatorik, Getrieben und Pumpen sowie passender Elektronik, Sensorik und Software aus einer Hand anzubieten.
6
Engineering CompetenceEntwicklungskompetenz
Innovation and Technology
Bühler Motor s Innovation and Technology team looks far into the future. They identify and investigate technical trends within our core markets while new technologies are being developed in other branches.
Innovation und Technologie
Die Bühler Motor Innovations- und Technologieentwicklung richtet ihren Blick weit in die Zukunft. Sie identifiziert und untersucht technische Trends sowohl in unseren Kernmärkten als auch neue Technologien aus anderen Branchen.
Advanced Engineering
Our Advanced Development unit supports us with new fully-developed and tested solutions. This allows us to react to customer requirements faster and more cost-effectively.
Vorentwicklung
Unsere Vorentwicklung unterstützt uns mit fertig entwickelten und getesteten neuen Lösungen. So können wir auf Kundenanforderungen schneller und kostengünstiger reagieren.
f as t fo r ward so lu t ions
w w w.buehlermotor.com7
Electronics Development
As products become significantly more sophisticated, electronics have an increasingly important part to play. To meet these requirements, we have our own capable electronics development team for hardware and software.
Elektronikentwicklung
Bei immer anspruchsvoller werdenden Produkten spielt Elektronik eine immer größere Rolle. Um diesen Anforde-rungen gerecht zu werden, haben wir ein eigenes kompeten-tes Elektronik-Entwicklungsteam für Hard- und Software.
Engineering Service
Utilizing simulations, our internal prototype shop, and our own test capabilities, we are able to produce prototypes faster, therefore safeguarding your concept.
Engineering Service
Mit Simulationen, einem eigenen Prototypenbau und einereigenen Testabteilung schaffen wir es schneller Muster zu realisieren und so Ihr Konzept abzusichern.
8
Simulation
3 Motor, pump, gear design and magnetic circuit simulation
3 Strength calculations
3 Flow simulations
3 Simulation of complex systems
3 Vibration analyses
3 Temperature field calculations
3 Injection molding simulations (Moldflow)
Simulation
3 Motor-, Pumpen-, Getriebeauslegung und Magnetkreissimulation
3 Festigkeitsberechnungen
3 Strömungssimulationen
3 Simulation komplexer Systeme
3 Vibrationsanalysen
3 Temperaturfeldberechnungen
3 Spritzgusssimulation (Moldflow)
Engineering ServiceEngineering Service
Testing
3 EMC measurements: insulation and high-voltage tests, ESD tests and electrical parameter tests
3 Environmental tests: climate and thermal shock, salt spray, thawing and shakers
3 Acoustic tests in operating noise chamber
3 Durability tests under mechanical loads and in various media (oil, urea, Glysantin, …)
Testing
3 EMV-Messungen: Isolations- und Hochspannungstests, ESD-Prüfungen und Elektrische Parameterprüfungen
3 Umwelttests: Klima- und Thermoschock, Salznebel, Betauung und Vibrationsprüfung
3 Akustikprüfungen in Laufgeräuschkammer
3 Lebensdauertests unter mechanischen Lasten und in verschiedenen Medien (Öl, Harnstoff, Glysantin, …)
Prototyping
3 Winding of armatures and stators
3 Final mounting of subassemblies
3 Mechanical finishing
3 3D printing
3 Laser labeling
3 Gear cutting
3 Electrostatic coating, balancing, magnetizing
3 Separate ESD area
Prototypenbau
3 Wickeln von Ankern und Statoren
3 Endmontage von Baugruppen
3 Mechanische Bearbeitung
3 3D-Drucken
3 Laserbeschriften
3 Zahnradfräsen
3 Elektrostatisches Beschichten, Wuchten, Magnetisieren
3 Separater ESD Bereich
9 w w w.buehlermotor.com
fas t fo r ward so lu t ions
Engineering ServiceEngineering Service
10
100% Quality and Zero Defects
From the first sketch until dispatch – quality is an integral part of the process at Bühler Motor. Quality is not only a question of process optimization, but also of product design.
Our development projects are consistently managed within the scope of the APQP process based on the level of project maturity.
100 % Qualität und Null-Fehler
Von der ersten Skizze bis zum Versand – Qualität ist bei BühlerMotor ein fester Bestandteil. Qualität ist nicht nur eine Frage der Prozessoptimierung, sondern auch des Produktdesigns.
Unsere Entwicklungsprojekte werden konsequent im Rah-men des APQP-Prozesses mittels Projektreifegradermittlung abgesichert.
Quality CompetenceQualitätskompetenz
ISO TS 16949
ISO 14001
f as t fo r ward so lu t ions
w w w.buehlermotor.com
Industrialization
Bühler Motor is able to establish the processes and procedures necessary to successfully bring your product into full-scale production.
This includes
3 The advanced development of new technologies in regards to assembly processes and plastic injection molding
3 The development, construction and sourcing of plastic injection molding tools and related peripheral automation
3 The development, fabrication and sourcing of fixtures from one-piece-flow assembly to fully automatic assembly lines
3 The planning, production, and procurement of all quality assurance measure-ment and testing equipment
Manufacturing Technology
3 Magnet-, micro- and plastic-injection molding
3 Stator and armature winding
3 Metal and plastic laser welding
3 1+2K gluing processes
3 Robotic applications
3 End of line testing
Fertigungstechnologien
3 Magnet-, Mikro- und Kunststoffspritzguss
3 Stator- und Ankerwickeltechnik
3 Metall- und Kunststofflaserschweißen
3 1+2K-Klebeprozesse
3 Robotikanwendungen
3 End of Line Testverfahren
11
Quality CompetenceQualitätskompetenz
Production CompetenceFertigungskompetenz
Industrialisierung
Bühler Motor ist in der Lage mit den notwendigen Verfahren und Prozessen Ihr Produkt in Serie zu bringen.
Dazu gehören
3 die Vorentwicklung neuer Technologien hinsichtlich Montageprozesse und Kunststoffspritzgießen
3 die Entwicklung, Anfertigung und Beschaffung von Kunststoffspritzwerk-zeugen mit dazugehöriger Peripherieautomation
3 die Entwicklung, Anfertigung und Beschaffung von Vorrichtungen zur One-Piece-Flow Montage bis hin zur vollautomatischen Fertigungslinie
3 die Planung, Herstellung und Beschaffung aller qualitätssichernden Mess- und Prüfeinrichtungen
TransmissionGetriebePage 14
Coasting, Stop/Start, Hybrid DrivingSegeln, Start/Stopp, Hybrides Fahren
All-Wheel DriveAllradPage 16
AWD Clutch, Limited Slip Differential, Transfer CaseAllradkupplung, Sperrdifferential, Verteilergetriebe
Automotive Solutions
12
Emission ReductionAbgasnachbehandlungPage 20
SCR (Selective Catalytic Reduction)SCR (Selektive katalytische Reduktion)
VacuumVakuumPage 22
Brake BoosterBremskraftverstärker
Thermal ManagementThermo-ManagementPage 18
Cooling and HeatingKühlung und Heizung
f as t fo r ward so lu t ions
w w w.buehlermotor.com13
Transmission
14
ANWENDUNG DCT, AT, CVT, MT, BEV-/Hybrid-Getriebe (DHT)Elektrische
Getriebeöl- pumpen
Shift-/clutch-/park-by-wire für DCT, AT, CVT, AMT, BEV-/Hybrid-Getriebe (DHT)
Elektro- mechanische
Aktuatoren
APPLICATION DCT, AT, CVT, MT, BEV-/hybrid transmissions (DHT)Electric
transmission oil pumps
Shift-/clutch-/park-by-wire for DCT, AT, CVT, AMT, BEV-/hybrid transmissions (DHT)
Electro- mechanical
actuators
Coasting,
Stop/Start,
Hybrid Driving
Segeln,
Start/Stopp,
Hybrides Fahren
Getriebe
Pictures not true scale
15
BESONDERHEITEN / NUTZEN Unsere elektrische Getriebeölpumpen-Familie sichert nicht nur neue Funktio-nalitäten im Getriebe, sondern ermöglicht auch erhebliche Effizienzsteigerungen und damit C02-Einsparungen. Lösungen für Start/Stopp, Segeln und elektrisches Fahren, zur gezielten Schmierung und Kühlung, Trockensumpflösungen und Zusatzfunktionalitäten, z.B. Aktuierung von Parksperren.
3 Voll- oder teilweise in das Getriebe integrierbar 3 Alternativ: Montage außen am Getriebe.3 Materialien und Dichtsysteme entsprechend der Einsatzbedingungen
und der verwendeten Öle3 Je nach hydraulischer Anforderung als Strömungs- oder Verdrängerpumpen
(Flügelrad, Gerotor oder Flügelzellen)3 Kundenspezifische Kommunikation (PWM / LIN / CAN-Schnittstelle)
Hochintegrierte Aktuatoren zur direkten Betätigung von Kupplung, Schaltung oder Parksperre im Getriebe (x-by-wire).
3 Robustes Design3 Positionsrückmeldung3 DC oder BLDC Technologie 3 Hall-Sensor oder GMR Technologie
TECHNISCHE DATEN 3 bFlow O20
• Leistungsaufnahme: 20 W – 80 W • Temperaturbereich: -40°C – +140°C • Max. Fördermenge (typisch): 20 l/h • Max. Förderdruck: 500 mbar • Lebensdauer: > 10.000 h • Schutzart: IP6K9K
3 bFlow O100 / bFlow O300/ bFlow O500 • Leistungsaufnahme: 100 W – 600 W • Temperaturbereich: -40°C – +140°C • Max. Fördermenge (typisch): 20 l/h • Max. Förderdruck: 30 bar • Lebensdauer: > 10.000 h • Schutzart: IP6K9K oder im Getriebe
• Leistungsaufnahme: 80 W – 600 W • Temperaturbereich: -40°C – +140°C • Lebensdauer: > 10.000 h • Schutzart: IP6K9K • Durchmesser: 40 bis 70 mm • Länge: variabel
FEATURE / BENEFIT Our electric transmission oil pump product family not only ensures functionalities in the gearbox, but also enables considerable efficiency increases which ultimately results in CO2 savings. Solutions for Stop/Start, coasting, and electric driving, targeted lubrication and cooling, dry sump solutions and additional functionalities, e.g. actuation of parking locks.
3 Can be fully or partially integrated into the transmission. 3 Alternative assembly on the outside of the transmission.3 Materials and sealing systems corresponding to the implementation
requirements and the oils used.3 Depending on the hydraulic requirement as power or displacement pumps (impeller, gerotor, vane pumps). 3 Customer specific communication (PWM / LIN / CAN interface)
Highly integrated actuators enable the direct operation of coupling, circuitry or parking locks in the transmission (x-by wire).
3 Robust design3 Position feedback3 DC or BLDC technology3 Hall sensor or GMR technology
TECHNICAL DATA 3 bFlow O20
• Power consumption: 20 W – 80 W • Temperature range: -40°C – +140°C • Max. flowrate (typical): 20 l/h • Max. pressure: 500 mbar • Lifetime: > 10,000 h • Protection class: IP6K9K
3 bFlow O100 / bFlow O300 / bFlow O500 • Power consumption: 100 W – 600 W • Temperature range: -40°C – +140°C • Max. flowrate (typical): 20 l/h • Max. pressure: 30 bar • Lifetime: > 10,000 h • Prot. class: IP6K9K or inside transmission
• Power consumption: 80 W – 600 W • Temperature range: -40°C – +140°C • Lifetime: > 10,000 h • Protection class: IP6K9K • Diameter: 40 to 70 mm • Length: variable
All-Wheel Drive
16
ANWENDUNG Elektrohydraulische Allrad-Kupplungssysteme Verteilergetriebe Sperrdifferentiale
Elektro- mechanische
Aktuatoren
Elektrohydraulische Allrad-Kupplungssysteme Verteilergetriebe Sperrdifferentiale
Elektrische Pumpen und
Pumpen- antriebe
APPLICATION Electrohydraulic four-wheel coupling systemsTransfer case Limited slip differentials
Electrohydraulic four-wheel coupling systemsTransfer case Limited slip differentials
Electrical pumps and
pump drives
AWD Clutch,
Transfer Case,
Limited Slip
Differential
Allradkupplung,
Verteilergetriebe,
Sperrdifferential
Electro- mechanical
actuators
Allrad
BESONDERHEITEN / NUTZEN Hochintegrierte Aktuatoren mit exakter Drehmomentübertragung der Kupplung durch präzise Positionsstellung vom „Kiss-Point“ bis zur komplett geschlossenen Kupplung. Auf Wunsch effizientes Halten der Einstellung durch selbsthemmende Schnecken-getriebe oder elektromagnetische Bremsen.
3 Hohe Drehmomente3 Optional Potentiometer, hallbasierte Inkremental-Sensoren, GMR Sensoren3 Robustes Design für alle Allradanwendungen3 DC oder BLDC Technologie
Pumpen und Pumpenantriebe mit sehr gutem Gleichlauf erlauben das direkte Ansteuern der Allradkupplung. Mittels optionaler Sensorik sehr genaue und schnelle Regelung der Drehzahl über den gesamten Arbeitsbereich.
3 Flexible Schnittstellen für axiale Kolben-, Zahnrad- und Gerotorpumpen3 Optionale hallbasierte Inkremental-Sensoren, GMR Sensoren3 Robustes Design für alle Allradanwendungen3 DC oder BLDC Technologie
TECHNISCHE DATEN • Leistungsaufnahme: 20 W – 300 W • Temperaturbereich: -40°C – +140°C • Lebensdauer: > 10.000 h• Schutzart: IP6K9K• Durchmesser: 40 – 70 mm• Länge: variabel
• Leistungsaufnahme: 20 W – 300 W • Temperaturbereich: -40°C – +140°C• Max. Förderdruck: 40 bar • Lebensdauer: > 10.000 h• Schutzart: IP6K9K
FEATURE / BENEFIT Highly integrated actuators with exact torques transfer the coupling through precise positioning of the kiss point until complete closure of coupling. If desired, effective holding of setting can be enabled through self-inhibiting worm gears or electromagnetic breaks.
3 High torque3 Optional potentiometer, hall effect incremental sensors, GMR sensors3 Robust design for all four-wheel applications3 DC or BLDC technology
Pumps and pump drives with very good synchronization allow direct steering of the four-wheel coupling. Using optional sensors, very precise and fast regulation of the speed over the entire work area can be achieved.
3 Flexible interfaces for axial piston, cogwheel and gerotor pumps3 Optional hall effect incremental sensors, GMR sensors3 Robust design for all four-wheel applications3 DC or BLDC technology
TECHNICAL DATA • Power consumption: 20 W – 300 W • Temperature range: -40°C – +140°C • Lifetime: > 10,000 h• Protection class: IP6K9K• Diameter: 40 – 70 mm• Length: variable
• Power consumption: 20 W – 300 W • Temperature range: -40°C – +140°C • Max. pressure: 40 bar• Lifetime: > 10,000 h• Protection class: IP6K9K
Pictures not true scale
17
Thermal Management
18
ANWENDUNG Stand- und ZusatzheizsystemeInnenraumheizungNachlaufkühlung AGR- und TurboladerkühlungBatterie- und Leistungselektronikkühlung in HybridanwendungenE-Fahrzeuge
EC Zusatz- wasserpumpen
Stand- und Zusatzheizungen EC und DC Motoren
APPLICATION Stationary and auxiliary heatersInterior heating After boil treatmentEGR and turbo charger coolingBattery and power electronics cooling in hybrid applicationsE-vehicles
Stationary and auxiliary heatersEC and DC motors
Cooling and
Heating
Kühlung und
Heizung
EC auxiliary water pumps
Thermo-Management
19
BESONDERHEITEN / NUTZEN Unsere Wasserpumpen-Familie deckt einen breiten Leistungsbereich ab. Das je nach Leistungsklasse optimierte kompakte Design und geringe Gewicht in Verbindung mit einem hochflexiblen Befestigungskonzept eröffnet unseren Kunden weitreichende Einsatzmöglichkeiten. Durch unser standardisiertes Fertigungskonzept können alle Wasserpumpen weltweit produziert werden.
3 Kundenspezifische Kommunikation (PWM, LIN)3 Motoranbaufähigkeit3 Kundenspezifisches Anschlussdesign (hydraulisch, elektrisch) 3 Leistungsspezifisches hydraulisches Konzept3 Nasslaufendes Motorkonzept mit statischem Dichtkonzept3 Für Hybrid und vollelektrische Anwendungen geeignet
Bewährte EC und DC Gebläsemotoren mit extrem stabilem Gleichlauf und sehr niedriger Geräuschentwicklung.
3 Kugellager mit spezieller Dichtung3 Für Hochtemperatur-Anwendungen3 Hoher Wirkungsgrad
TECHNISCHE DATEN 3 bFlow C
• Leistungsaufnahme: 12 W – 150 W • Temperaturbereich: -40°C – +135°C • Max. Fördermenge: 950 – 3.000 l/h • Max. Förderdruck: 200 – 1.500 mbar • Lebensdauer: > 10.000 h (optional bis 40.000 h) • Schutzart: IP6K9K • EMV CISPR25 - Level 5
• Leistungsaufnahme: 20 W - 300 W • Temperaturbereich: -40°C – +105°C • Lebensdauer: > 10.000 h • Schutzart: variabel • Durchmesser: 35 – 52 mm • Länge: 51 – 77 mm
FEATURE / BENEFIT Our auxiliary water pump family covers a wide power range. The compact design and low weight of the optimized power class in combination with a highly flexible mounting concept opens up a wide range of application opportunities for our customers. Our standardized production concept ensures all water pumps can be produced worldwide.
3 Customer specific communication (PWM, LIN) 3 Motor mountable3 Customer specific connection geometry (hydraulic, electric)3 Power specific hydraulic concept3 Wet running motor concept with static sealing concept3 Suitable for hybrid and full-electric applications
Proven EC and DC blower motors with extremely stable synchronism and very low noise.
3 Ball bearings with special sealing3 For high temperature application3 High efficiency
• Power consumption: 20 W – 300 W • Temperature range: -40°C – +105°C • Lifetime: > 10,000 h • Protection class: variable • Diameter: 35 – 52 mm • Length: 51 – 77 mm
Pictures not true scale
TECHNICAL DATA 3 bFlow C
• Power consumption: 12 W – 150 W • Temperature range: -40°C – +135°C • Max. flowrate: 950 – 3,000 l/h • Max. pressure: 200 – 1,500 mbar • Lifetime: > 10,000 h (optional up to 40,000 h) • Protection class: IP6K9K • EMV CISPR25 - Level 5
Emission Reduction
20
ANWENDUNG AdBlue®/DEF Pumpe in SCR-Systemen EC SCR Pumpen,
Elektrische Außenzahnrad-
pumpen
APPLICATION AdBlue®/DEF pump in SCR systems
SCR (Selective
Catalytic
Reduction)
SCR (Selektive
katalytische
Reduktion)
EC SCR pumps
Electrical outer gear
pumps
Abgasnachbehandlung
21
BESONDERHEITEN / NUTZEN Kompakte AdBlue®/DEF Pumpe mit Spalttopfdesign zur Förderung von Reduktionsflüssigkeit zum SCR Injektor.
3 Bidirektional, befüllen/fördern und entleeren mit einer Pumpe3 Einfriersicheres Design3 RDE fähig3 Defrost-Unterstützung möglich3 In-Tank oder an-Tank Lösung verfügbar3 Kompakt-/Leichtbauvariante verfügbar 3 Robuster Spalttopf aus Edelstahl3 Niedriges Laufgeräusch
TECHNISCHE DATEN • Leistungsaufnahme: < 21 W • Temperaturbereich: -40°C – +80°C • Max. Fördermenge: 10 l/h • Max. Förderdruck: bis 7 bar • Lebensdauer: > 6.000 h
FEATURE / BENEFIT Compact AdBlue®/DEF pump with seperator is designed for feeding diesel exhaust fluid to SCR injector.
3 Bidirectional, priming und purging with one pump3 Freezing-safe design3 RDE capable3 De-frost support possible3 In-tank or on-tank design available3 Compact-/lightweight design available3 Highly integrated seperator can design3 Low audible sound profile
TECHNICAL DATA • Power consumption: < 21 W • Temperature range: -40°C – +80°C • Max. flowrate: 10 l/h • Max. pressure: bis 7 bar • Lifetime: > 6,000 h
Pictures not true scale
Vacuum
22
ANWENDUNG BremskraftverstärkerElektrische
Pumpenantriebe
APPLICATION Brake booster supportBrake Booster
Bremskraft-
verstärkung
Electric pump drives
Vakuum
23
BESONDERHEITEN / NUTZEN Geräuscharmer DC Pumpenantrieb für elektrische Vakuumpumpen z.B. zur Bremskraftunterstützung.
3 Hochintegriertes Design für Flügelzellenpumpe3 Sehr enge Toleranzen3 Einbaulage horizontal und vertikal möglich
TECHNISCHE DATEN • Leistungsaufnahme: 80 W - 130 W • Temperaturbereich: -40°C – + 120°C • Lebensdauer: 450.000 Zyklen • Schutzart: IP6K9K • EMV CISPR25 – Level 5 • Durchmesser: 51 mm • Länge: 100 mm
FEATURE / BENEFIT Low noise DC pump drive for electric vacuum pumps eg. brake booster support.
3 Highly-integrated design for vane pump3 Very precise tolerances3 Vertical and horizontal mounting position possible
TECHNICAL DATA • Power consumption: 80 W – 130 W • Temperature range: -40°C – +120°C • Lifetime: 450,000 cycles • Protection class: IP6K9K • EMV CISPR25: Level 5 • Diameter: 51 mm • Length: 100 mm
Pictures not true scale
Milestones
SOP first Transmission Oil Pump
SOP erste Getriebeölpumpe
EC AdBlue® pump within the SCR tank: INERGY for SCR-Systems
EC-AdBlue®-Pumpe innerhalb des SCR-Tanks: INERGY für SCR-Systeme
First gear train application: Shift actuator for automated gear shifting: GETRAG for Smart ForFour
Erste Getriebeanwendung: Schaltaktuator für automatische Gangwahl: GETRAG für Smart ForFour
First powertrain application: Oil pump motors for hydraulic all-wheel drives: HALDEX for Volvo, VW
Erste Anwendung im Antriebsstrang:Ölpumpenantriebe für hydraulische Allradantriebe: HALDEX für Volvo, VW
2017
2012
24
Meilensteine
Founded as a clock manufacturer in Triberg (Black Forest)
Gegründet als Uhrenmanufaktur in Triberg (Schwarzwald)
1855
First powertrain application: Oil pump motors for hydraulic all-wheel drives: HALDEX for Volvo, VW
Erste Anwendung im Antriebsstrang:Ölpumpenantriebe für hydraulische Allradantriebe: HALDEX für Volvo, VW
First Bühler DC motor: The so called „Brass Motor“
Der erste Bühler DC-Motor: der sogenannte Messing-Motor
First Automotive Application: Motor for 8-track-tape-player: DELCO ELECTRONICS for GM
Erste Automotive-Anwendung: Motor für ein 8-Spur Tonbandgerät: DELCO ELECTRONICS für GM
First complete pump:EC auxiliary water pump for heater: WEBASTO
Erste komplette Pumpe: EC-Zusatzwasserpumpe für Heizgerät: WEBASTO
EC motor for electric transmission oil pump: DAIMLER for DCT
EC-Motor für elektrische Getriebeölpumpe: DAIMLER für DKG
Start of the EC pump platforms bFlow C and bFlow O
Start der EC-Pumpen-Plattformen bFlow C and bFlow O
20172013
20122010
1969
1955
2003
1998
2004
25
Purchase of company by the great-great-grandfather of today’s partners
Kauf des Unternehmens durch den Ururgroßvater der heutigen Gesellschafter
1892
1925
Production of mechanical drive systems in Nuremberg, Germany
Produktion von mechanischen Antriebssystemen in Nürnberg
Yokohama, Japan
Chihuahua, MX
Morrisville, US
Detroit, US Nuremberg, DEMonheim, DE
Hradec Králové, CZ
Shanghai, CN
Yokohama, JP
Hong Kong, CNZhuhai, CN
Sales Offices
3 Europe
Bühler Motor GmbHAnne-Frank-Str. 33-3590459 NurembergGermanyTel.: +49 911 45 04 0Fax: +49 911 45 46 26e-mail: [email protected]: www.buehlermotor.de
3 USA
Buehler Motor, Inc.860 Aviation Parkway, Suite 300Morrisville, NC 27560Tel.: +1 919 380 3333Fax: +1 919 380 3256e-mail: [email protected]: www.buehlermotor.com
3 Asia
Buehler Motor (Zhuhai) Co., Ltd.Sales Office ShanghaiRoom 1602, UC Tower, No. 500 Fusahn Rd.Pudong, Shanghai, 200122Tel.: +86 21 6106 8618Fax: +86 21 6106 8618 Ext. 8666e-mail: [email protected]: www.buehlermotor.com
Uhldingen-Mühlhofen, DE
AM/1
7/9/
EN/D
E