Horton Spheres
Welded Storage Tanks
Mounded Bullets
Process Equipments
Piping
Structural
Skid Mounted Units
Separators Skid
Water Bath Heater
Pipeline Equipments
Floating Roof Accessories
Pipe Repair Clamps
JVEPL
G-2, Meera Appartments, 80, Alkapuri Society, Near Vanganga, Alkapuri, Baroda - 390 005. Gujarat, (INDIA)Phone : +91-265-2310652 • Fax : +91-265-2342670
E-Mail : [email protected]
Engineering Pvt. Ltd.
JVEPLWelcome To JNV Vira Engineering Pvt. Ltd.
1
We - JNV VIRA Engineering Pvt. Ltd have our work shop at GIDC Manusar with highly
Qualified & Experienced Engineers in Design, Manufacturing, Quality & Safety,
Procurement etc. The company is engaged to execute various types of equipments /
accessories as listed for process industries like Petrochemicals, Refineries and Oil &
Gas & Power sector.
We have experience in fabrication & supply of CS Storage Tank of Floating Roof, Cone
/Dome Roof & Cone /dome cum Floating Roof Type in knock down condition for
export orders. Apart from tanks, we have experience in supply of technological/ pipe
rack/ transmission tower/ building structure, ducting etc. in knock down condition
after mock up assembly as per client requirement for domestic as well as export order.
We design and manufacture as per most of the Indian and International codes, such as
API, ASME, BS, DIN, IBR, IS etc.
We are fabricating equipments in Carbon Steel, Stainless Steel-304, 304-L, 316, 316L, SS
410, other materials overlaid with Monel, Inconel and Stainless Steel under ASME
Section VIII, Div. I & II
Our associate companies has wide experience for Construction/ Erection/ Installation
of Cryogenic double wall Tanks for low temperature services, SS Silos/Tanks,
Dowtherm Heaters, Horton Sphere, Pig Iron Project, Structures, Equipments & Piping
work, Manufacture, Supply & replacement of Floating Roof Seal for Refinery,
Petrochemical Plants For various Clients under third party inspection like M/s. EIL, LRIS,
H&GC, DCL, B.V, NTPC, UHDE, DPG, SGS, BAX COUNSEL, PDIL, NIDC, etc.
3
JVEPLMounded Bullets
The mounded system of LPG storage installations are preferred to Horton Spheres
installation in present scenario due Safety & environment priorities. Apart from safety
of installation, distribution & handling is also safe. The mounded bullets are partially pre
fabricated at shop. We have team of highly qualified people to meet the quality
standards for this nature of work.
6
JVEPLSkid Mounted Units
• Skid mounted units are custom made to suit customer requirement
• All equipment, skid structure and piping fabricated at shop.
• Equipment Procured / fabricated as per design requirement & specifications.
• Alignment of all the skids and piping ensured prior to dispatch.
• Only cold work involved for assembly with minimum manpower.
• Easy to transport, handle & install.
• Economical for repeated & regular requirements.
• Process/design requirements can be verified at vendor’s works.
7
JVEPLSeparators Skid
The 2/3 phase separators are designed to meet separation of mixture water/ gas /oil
received from exploration.
• Separators are designed on data received customer like flow rates of oil, water and
gas, process conditions and vessel operation required.
• Vessel skids designed to code applicable for the installation. Generally from ASME
Section VIII, ANSI B31.1, API RP14C etc.
• Complete detailed engineering like nozzles .skid and vessel including skid layout,
saddle etc.
• Internals inlet impingement baffles, wave baffles, flow straightening baffles, mist
eliminators weir boxes, wave breakers, splash guards, down comers &
vortex breakers provided for effective separations
• Controls & Instrumentation provided to accurately measure the Gas, Oil & water
flows, regulate the pressure & monitor the levels of oil, water in the separator
• Oil & Water automatic removal system provided
8
JVEPLWater Bath Heater
• Indirect Water Bath Heaters are designed as per API 12K.
• The heating of high-pressure natural gas upstream of a pressure regulation station in
order to prevent the internal formation of natural gas water hydrates downstream of
the pressure regulator.
• The heating of a water saturated natural gas stream to prevent cooling and the
internal formation of natural gas water hydrates
• The heating of a water saturated natural gas stream upstream of primary separation
to an optimum temperature to facilitate good separation
• Natural Draft Burners & Forced Draft Burners provided as per requirement
• Water bath Temperature is controlled for satisfactory performance.
• Designed for Removable single or double Fire tube.
• Removable Heating coil.
9
JVEPLPipeline Equipments
Pig launchers are used to launch the pig into the pipeline, and pig receivers are used to
receive the pigs after they have made a successful run. The selection of these pig traps
will depend on the type of pig to be run and pipeline design Liquid spillage from the pig
traps should be avoided with proper precautions.
ASSOCIATED EQUIPMENTS
Anti-Spark pig receiving Trays, Pig Handling structure with Jib Crane, Pig Handling
System for inserting and retracting the pigs with Job Crane. Pig Signalers
Batching/Cleaning Pig Automation for BI/Multi product transfer
BY PASS CONNECTION
To ensure smooth running of Pigs and avoid any by-pass of kicker products. Flow
Tees/Barred Tees designed as per AMSI B31.4/31.8
QUICK OPERATING CLOSURE
Quick operating closure for venting/blow down purpose on pipeline
10
JVEPLFloating Roof Accessories
Articulated roof drain system Auto bleeder vent assembly
Flame proof gauge hatch Slot Dipping Devices
Flame Arrestor
Emergency drain with shut off facility
Pressure & Vaccum Relief Valve Emergency Venting
JVEPLPipe Repair Clamps
REPAIR CLAMPS & ENCLOSURES(BOLTABLE & WELDABLE HIGH PRESSURE SPILT SLEEVES)
• Designed per section 3 of API 6H• Size: API Pipe 50 mm to 1200 mm (2" to 48") NB and larger• Class: Standard 1000 psig and larger, such as ANSI 600 and 900 rating• Construction: Carbon Steel, Stainless Steel, and combination of SS wet parts & CS• Seal Width: Standard 5" and 8"; Special seal width up to 30"• Over-all-length: Standard 10"-17"; Special width up to 40"• Seal Material : Buna-N, Viton®, and Neoprene• Single-Piece Precision Die Moulded Seal fixed in wedgelock grooves in each half for peripheral and lateral sealing
DOUBLE HINGED ON-LINE PIT HOLE LEAK REPAIR CLAMPS & WELD CAP
• Size : 80 mm to 1200 mm (3" to 48") NB and larger• Pressure Rating : Up to 2000 psig; Construction in Carbon Steel and/or Stainless Steel• Seal Material : Buna-N, Viton®, Neoprene, EPDM and Teflon®
SLIP JOINT PIPE COUPLINGS:(WELDABLE HIGH PRESSURE COUPLINGS) for joining of cut Pipeline Ends
• Design per section 3 of API 6H.• Size : 100 mm to 1200 mm (4" to 48") NB and larger• Class: 1000 to 2000 psi for Anchored pipes• Construction: Carbon Steel and Stainless Steel• Seal Material : Buna-N, Viton®, Neoprene, EPDM and Teflon®.
Works: Plot No.: 597-625, GIDC - Savli Industrial Estate, village : Manjusar - 391 775, Dist: Vadodara