Download - FANUC ROBOSHOT α-SiA series -English-
-
Specifications
Note: When high filling mode is used, a special cylinder is needed. Molding conditions may be restricted depending on the screw diameter. For details, see a separate list of specifications.
Clampingunit
Injectionunit
kN
mm
mmmmmm
point/kN/mmmmcm3---
MPaMPaMPamm/smin-1
---MPaMPaMPamm/smin-1
UnitItem
15015tonf260/130
---160
260235355340
1/70.7tonf/50
525mm/s
525450
800mm/s
800450
149
---250250
---250250
1611
---250230
---250230
1819
---230190
---230190
149
---250250
---250250
1611
330250250
330250250
1819
300260260
300260260
2024
---270250
---270250
2229
---220200
---220200
149
---250250
---250250
1611
330250250
330250250
1819
300260260
300260260
2024
---270250
---270250
2229
---220200
---220200
2024
360280280
360280280
2229
340260240
340260240
2650
290210190
275210190
2858
250190160
240190160
3276
---150130
---------------
149
---250250
---------------
1611
---250250
---250250
1819
300260260
300260260
2024
360280280
360280280
2229
340260240
340260240
2650
290210190
275210190
2858
250190160
240190160
3276
---150130
---------------
30030tonf330/150
---230
310290440420
1/80.8tonf/60
525mm/s
525450
800mm/s
800450
30030tonfHigh precision clamp
330/150---
230310290440420
1/80.8tonf/60
525mm/s
525450
800mm/s
800450
50050tonf350/150410/210
250360320500470
5 / 202.0tonf/ 70
330mm/s
330450
500mm/s
50050tonfHigh precision clamp
350/150---
250360320500470
5 / 202.0tonf/ 70
330mm/s
330450
500mm/s
500450
Clampingunit
Injectionunit
Injectionunit
kN
mm
mmmmmm
point/kN/mmmmcm3---
MPaMPamm/smin-1
---MPaMPaMPamm/smin-1
---MPaMPaMPamm/smin-1
---MPaMPamm/smin-1
UnitItem1000100tonf
450/150520/220
350460410660610
5 / 252.5tonf/ 100
200mm/s
200300
330mm/s
330450
500mm/s
1000mm/s (Ultra high speed)
1300130tonf---
570/200400
530530730730
5 / 252.5tonf/ 100
200mm/s
200300
------
------
------
1500150tonf500/200575/275
440560510800750
5 / 353.5tonf/ 150
------
330mm/s (Small capacity)
330450
500mm/s (Small capacity)
1200mm/s (Ultra high speed)
200mm/s
200300
330mm/s
330400
------
------
2229
260260
340260260
340260260
400380
2650
260260
340260260
320260260
380350
2858
240220
320240220
280240220500450
350300
32103
220200
270220200
---220200
270230
36147
190170
220190170
---170170
------------
40181
160140
---160140
---------------
------------
32103
220200
---------
---------
------
36147
190170
---------
---------
------
40181
160140
---------
---------
------
2229
------
340260260
340260260
400350
2650
------
340260260
320260260
380250
2858
------
320240220
280240220500450
350210
32103
------
270220200
---220200
270160
36147
------
220190170
---170170
------------
40181
------
---160140
---------------
------------
32121
280280
380280280
---------
------
36153
280280
345280280
---------
------
40188
260220
280260260
---------
------
44268
220190
---220220
---------
------
48318
190160
---190190
---------
------
52442
160130
---160160
---------
------
Tonnage
Maximum and minimum Double platen mold height Single platen
Clamping strokeTie bar spacing (H V)
Platen size (H V)Ejector point / Ejector force / Ejector stroke
Screw diameterMaximum injection volume
Injection specificationMaximum injection pressure (High pressure filling mode)Maximum injection pressure
Maximum pack pressureMaximum injection speed
Maximum screw rotation speedInjection specification
Maximum injection pressure (High pressure filling mode)Maximum injection pressure
Maximum pack pressureMaximum injection speed
Maximum screw rotation speed
TonnageMaximum and minimum Double platen
mold height Single platenClamping stroke
Tie bar spacing (H V)Platen size (H V)
Ejector point / Ejector force / Ejector strokeScrew diameter
Maximum injection volumeInjection specification
Maximum injection pressureMaximum pack pressure
Maximum injection speedMaximum screw rotation speed
Injection specificationMaximum injection pressure (High pressure filling mode)Maximum injection pressure
Maximum pack pressureMaximum injection speed
Maximum screw rotation speedInjection specification
Maximum injection pressure (High pressure filling mode)Maximum injection pressure
Maximum pack pressureMaximum injection speed
Maximum screw rotation speedInjection specification
Maximum injection pressureMaximum pack pressure
Maximum injection speedMaximum screw rotation speed
Clampingunit
UnitItem
32121
380280280
------
32103
---380330
------
2858
---450430
------
2650
---450450
------
52442
---160130
------
48318
---190160
------------
44268
---220190
------
36153
345280280
------
40188
280260260
------
44268
---220220
------
48318
---190190
------
52442
---160160
------
40188
---280280
280280
44268
---280260
260260
400
48318
---270240
230230270
52442
---240220
200200
56640
---225195
172172
300
64836
---175150
------
------
68944
---155130
------
kN
mm
mmmmmm
point/kN/mmmmcm3---
MPaMPaMPamm/smin-1
---MPaMPamm/smin-1
330mm/s
330400
------
1200mm/s
1200450
------
2500 250tonf650/300
---600
7106351030960
13 / 808.0tonf/ 200
2200220tonf---
650/250550
650650900900
13 / 353.5tonf/ 150
200mm/s
200300
3000 300tonf650/300
---600
81071011301030
13 / 808.0tonf/ 200
240mm/s
240400
270mm/s
TonnageMaximum and minimum Double platen
mold height Single platenClamping stroke
Tie bar spacing (H V)Platen size (H V)
Ejector point / Ejector force / Ejector strokeScrew diameter
Maximum injection volumeInjection specification
Maximum injection pressure (High pressure filling mode)Maximum injection pressure
Maximum pack pressureMaximum injection speed
Maximum screw rotation speedInjection specification
Maximum injection pressureMaximum pack pressure
Maximum injection speedMaximum screw rotation speed
1000450
1200450
500450
5mm
-
8 9
Ease of UseFully enclosed cover style achieves both safety and accessibility
Conformity to safety standards supports molding plant globalizationRegional safety standards and multiple languages support
Safety requirements differ in regionPlease confirm the latest safety requirements of the region where ROBOSHOT is installed.
High-level safety
Fully enclosed cover style prevents contact with moving part and high temperature part with high-level safety
Achieves compact machine dimensions
Superior accessibility
Wide opened hopper maintenance area, Enhances accessibility
Multiple languages supportJapanese / English / Chinese simplified / Chinese traditional / Korean / Thai / VietnameseIndonesian / German / French / Italian / Spanish (Mexican) / Portuguese / Czech / FinnishDutch / Hungarian / Polish / Danish
The Japan society of Industrial Machinery manufacturers Standards
National Standard of the P.R.C.
CE Marking KCs Mark ANSI/SPIKorea North America
Japan
China
EU
Robot system with superior interoperability*Superior interoperability
Wire-saving connection by high speed and reliable I/O LinkAllows principle robot operation on ROBOSHOT screenVisualization of molding plant by ROBOSHOT-LINK+
ROBOSHOT-LINK+
FANUCROBOSHOT-LINK+
Operating statusof FANUC Robot Product and quality information
of ROBOSHOT
Status signal Safety signal
I/O Link
Robot systemization example[Automatized checksort]1.Precision and stable molding by ROBOSHOT
2.Automatic check and sort after parts detection by FANUC Robot
1.Precision insert of partsby FANUC Robot
2.Precision and stable molding by ROBOSHOT
Precision connectorResin : LCP
Automotive interior partResin : ABS
*:Optional. Available options differ in region and model.
[Automatized checkinsert]
ROBOSHOTFANUC >
5mm
-
10 11
Decompression control at injection to packing (8 modes)Prevents sink marks and warpage, Achieves uniformed thickness distribution
High pressure resistance cylinder and High pressure filling mode* Achieves thinner wall molding by injection with ultra high pressure
Application to a range of molding fieldsThin wall light guide panel
Light guide panel for smartphone Resin : PC
Precise lens
Camera lens for smartphoneResin : COC
Precise connector
Precise fine-pitch connectorResin : LCP
Automotive parts
Automotive connectorResin : PBT
Medical parts
SyringeResin : COP
*:Optional, Available options differ in region and model.
Air connector for air ejector
Terminal box(I/O for mold)
Purge cover
100V Outlet
Thermal insulationcover
200V Outlet
Optional, Available options differ in region and model.Refer to the specification list for details on the options.
Telescopic multi colorsignal tower(LED type)
Hot runner controller(Built-in)
Manifoldsfor piping
Mold heatercontroller
Interface for auxiliaryequipments
Options
Maintenance and customer supportWorldwide customer service and supportFANUC operates customer service and support system anywhere in the world through subsidiaries, affiliates and distributor partners. FANUC provides the highest quality service with the quickest response at the location nearest you.
TrainingFANUC Training Center operates training programs on FANUC ROBOSHOT which focus on practical operations and molding know how and maintenance.
Moving platen support by linear guides* Superior platen parallelism and straightness of clamp motion
Screw and cylinder for lens moldingOptimized screw design and surface treatment achieves high-quality molding
Single platenExpanded mold installation area, Supports magnetic clamping system
Hot runner controller (Built-in)*Integrated into ROBOSHOT operation, Achieves precise temperature control
Fully enclosed cover styleClean and quiet, Ideal for molding in clean roomSuitable feeding device*Prevents burn and carbonization, Suitable for molding with transparent resin
Two components molding
Automotive interior partResin : ABS+PP
Second injection unit*FANUC CNC installed, operate from ROBOSHOT screenAdditional servo axis control*Integrated into ROBOSHOT operation, Achieves high-speed and accuracy positioning of rotary table
Precise meteringReduces weight variation and eliminates stringy, Achieves long term molding repeatability
Nozzle for Liquid Crystal Polymer*Optimized nozzle and temperature control for LCP achieves high-quality molding, Prevents resin carbonization
Headquarters
London
Paris
Bangalore
Beijing
Taipei
ChicagoDalian
ChangwonBarcelonaMilanBudapestSofia
Johannesburg
Kuala LumpurSingaporeJakarta
Taichung
Bangkok
Detroit
Sao Paulo
StuttgartLuxembourg
IstanbulMoscow
Prague
Ho Chi Minh
Manila
Sydney
ShanghaiShen Zhen
World Wide Support Over 230 Offices
-
10 11
Decompression control at injection to packing (8 modes)Prevents sink marks and warpage, Achieves uniformed thickness distribution
High pressure resistance cylinder and High pressure filling mode* Achieves thinner wall molding by injection with ultra high pressure
Application to a range of molding fieldsThin wall light guide panel
Light guide panel for smartphone Resin : PC
Precise lens
Camera lens for smartphoneResin : COC
Precise connector
Precise fine-pitch connectorResin : LCP
Automotive parts
Automotive connectorResin : PBT
Medical parts
SyringeResin : COP
*:Optional, Available options differ in region and model.
Air connector for air ejector
Terminal box(I/O for mold)
Purge cover
100V Outlet
Thermal insulationcover
200V Outlet
Optional, Available options differ in region and model.Refer to the specification list for details on the options.
Telescopic multi colorsignal tower(LED type)
Hot runner controller(Built-in)
Manifoldsfor piping
Mold heatercontroller
Interface for auxiliaryequipments
Options
Maintenance and customer supportWorldwide customer service and supportFANUC operates customer service and support system anywhere in the world through subsidiaries, affiliates and distributor partners. FANUC provides the highest quality service with the quickest response at the location nearest you.
TrainingFANUC Training Center operates training programs on FANUC ROBOSHOT which focus on practical operations and molding know how and maintenance.
Moving platen support by linear guides* Superior platen parallelism and straightness of clamp motion
Screw and cylinder for lens moldingOptimized screw design and surface treatment achieves high-quality molding
Single platenExpanded mold installation area, Supports magnetic clamping system
Hot runner controller (Built-in)*Integrated into ROBOSHOT operation, Achieves precise temperature control
Fully enclosed cover styleClean and quiet, Ideal for molding in clean roomSuitable feeding device*Prevents burn and carbonization, Suitable for molding with transparent resin
Two components molding
Automotive interior partResin : ABS+PP
Second injection unit*FANUC CNC installed, operate from ROBOSHOT screenAdditional servo axis control*Integrated into ROBOSHOT operation, Achieves high-speed and accuracy positioning of rotary table
Precise meteringReduces weight variation and eliminates stringy, Achieves long term molding repeatability
Nozzle for Liquid Crystal Polymer*Optimized nozzle and temperature control for LCP achieves high-quality molding, Prevents resin carbonization
Headquarters
London
Paris
Bangalore
Beijing
Taipei
ChicagoDalian
ChangwonBarcelonaMilanBudapestSofia
Johannesburg
Kuala LumpurSingaporeJakarta
Taichung
Bangkok
Detroit
Sao Paulo
StuttgartLuxembourg
IstanbulMoscow
Prague
Ho Chi Minh
Manila
Sydney
ShanghaiShen Zhen
World Wide Support Over 230 Offices
-
Specifications
Note: When high filling mode is used, a special cylinder is needed. Molding conditions may be restricted depending on the screw diameter. For details, see a separate list of specifications.
Clampingunit
Injectionunit
kN
mm
mmmmmm
point/kN/mmmmcm3---
MPaMPaMPamm/smin-1
---MPaMPaMPamm/smin-1
UnitItem
15015tonf260/130
---160
260235355340
1/70.7tonf/50
525mm/s
525450
800mm/s
800450
149
---250250
---250250
1611
---250230
---250230
1819
---230190
---230190
149
---250250
---250250
1611
330250250
330250250
1819
300260260
300260260
2024
---270250
---270250
2229
---220200
---220200
149
---250250
---250250
1611
330250250
330250250
1819
300260260
300260260
2024
---270250
---270250
2229
---220200
---220200
2024
360280280
360280280
2229
340260240
340260240
2650
290210190
275210190
2858
250190160
240190160
3276
---150130
---------------
149
---250250
---------------
1611
---250250
---250250
1819
300260260
300260260
2024
360280280
360280280
2229
340260240
340260240
2650
290210190
275210190
2858
250190160
240190160
3276
---150130
---------------
30030tonf330/150
---230
310290440420
1/80.8tonf/60
525mm/s
525450
800mm/s
800450
30030tonfHigh precision clamp
330/150---
230310290440420
1/80.8tonf/60
525mm/s
525450
800mm/s
800450
50050tonf350/150410/210
250360320500470
5 / 202.0tonf/ 70
330mm/s
330450
500mm/s
50050tonfHigh precision clamp
350/150---
250360320500470
5 / 202.0tonf/ 70
330mm/s
330450
500mm/s
500450
Clampingunit
Injectionunit
Injectionunit
kN
mm
mmmmmm
point/kN/mmmmcm3---
MPaMPamm/smin-1
---MPaMPaMPamm/smin-1
---MPaMPaMPamm/smin-1
---MPaMPamm/smin-1
UnitItem1000100tonf
450/150520/220
350460410660610
5 / 252.5tonf/ 100
200mm/s
200300
330mm/s
330450
500mm/s
1000mm/s (Ultra high speed)
1300130tonf---
570/200400
530530730730
5 / 252.5tonf/ 100
200mm/s
200300
------
------
------
1500150tonf500/200575/275
440560510800750
5 / 353.5tonf/ 150
------
330mm/s (Small capacity)
330450
500mm/s (Small capacity)
1200mm/s (Ultra high speed)
200mm/s
200300
330mm/s
330400
------
------
2229
260260
340260260
340260260
400380
2650
260260
340260260
320260260
380350
2858
240220
320240220
280240220500450
350300
32103
220200
270220200
---220200
270230
36147
190170
220190170
---170170
------------
40181
160140
---160140
---------------
------------
32103
220200
---------
---------
------
36147
190170
---------
---------
------
40181
160140
---------
---------
------
2229
------
340260260
340260260
400350
2650
------
340260260
320260260
380250
2858
------
320240220
280240220500450
350210
32103
------
270220200
---220200
270160
36147
------
220190170
---170170
------------
40181
------
---160140
---------------
------------
32121
280280
380280280
---------
------
36153
280280
345280280
---------
------
40188
260220
280260260
---------
------
44268
220190
---220220
---------
------
48318
190160
---190190
---------
------
52442
160130
---160160
---------
------
Tonnage
Maximum and minimum Double platen mold height Single platen
Clamping strokeTie bar spacing (H V)
Platen size (H V)Ejector point / Ejector force / Ejector stroke
Screw diameterMaximum injection volume
Injection specificationMaximum injection pressure (High pressure filling mode)Maximum injection pressure
Maximum pack pressureMaximum injection speed
Maximum screw rotation speedInjection specification
Maximum injection pressure (High pressure filling mode)Maximum injection pressure
Maximum pack pressureMaximum injection speed
Maximum screw rotation speed
TonnageMaximum and minimum Double platen
mold height Single platenClamping stroke
Tie bar spacing (H V)Platen size (H V)
Ejector point / Ejector force / Ejector strokeScrew diameter
Maximum injection volumeInjection specification
Maximum injection pressureMaximum pack pressure
Maximum injection speedMaximum screw rotation speed
Injection specificationMaximum injection pressure (High pressure filling mode)Maximum injection pressure
Maximum pack pressureMaximum injection speed
Maximum screw rotation speedInjection specification
Maximum injection pressure (High pressure filling mode)Maximum injection pressure
Maximum pack pressureMaximum injection speed
Maximum screw rotation speedInjection specification
Maximum injection pressureMaximum pack pressure
Maximum injection speedMaximum screw rotation speed
Clampingunit
UnitItem
32121
380280280
------
32103
---380330
------
2858
---450430
------
2650
---450450
------
52442
---160130
------
48318
---190160
------------
44268
---220190
------
36153
345280280
------
40188
280260260
------
44268
---220220
------
48318
---190190
------
52442
---160160
------
40188
---280280
280280
44268
---280260
260260
400
48318
---270240
230230270
52442
---240220
200200
56640
---225195
172172
300
64836
---175150
------
------
68944
---155130
------
kN
mm
mmmmmm
point/kN/mmmmcm3---
MPaMPaMPamm/smin-1
---MPaMPamm/smin-1
330mm/s
330400
------
1200mm/s
1200450
------
2500 250tonf650/300
---600
7106351030960
13 / 808.0tonf/ 200
2200220tonf---
650/250550
650650900900
13 / 353.5tonf/ 150
200mm/s
200300
3000 300tonf650/300
---600
81071011301030
13 / 808.0tonf/ 200
240mm/s
240400
270mm/s
TonnageMaximum and minimum Double platen
mold height Single platenClamping stroke
Tie bar spacing (H V)Platen size (H V)
Ejector point / Ejector force / Ejector strokeScrew diameter
Maximum injection volumeInjection specification
Maximum injection pressure (High pressure filling mode)Maximum injection pressure
Maximum pack pressureMaximum injection speed
Maximum screw rotation speedInjection specification
Maximum injection pressureMaximum pack pressure
Maximum injection speedMaximum screw rotation speed
1000450
1200450
500450