1
FMTT&PC RKVY List of Equip
Farm Machinery Testing, Training and Production Centre, Dr. PDKV., Akola Annexure: List of Items to be purchase by tender process
Item No.
Equipment / Instrument required
Specification
1 Universal Testing Machine (Hydraulic Computerized version) with data logger
Microprocessor based universal testing machine 10 Tonn capacity with pc, Printer and software. Complete with tension , compression & Transverse attachment (With essential accessories)
2 Electronic Microprocessor Impact Testing Machine
Charpy, izod and impact tension test, pendulum drop angle 1400 charpy and impact test, 85021’ for Izode test, impact energy 15 to 30 kgm(With essential accessories)
3 Tensile Testing Machine Digital model
Capacity 5000 N, grip separation 25 to 1000 mm, traverse speed 100, 3 hp 440 V.(With essential accessories)
4 Torsion Testing Machine CAPACITY 50 KGM. CAPACITY 100 KGM. CAPACITY 600 KGM.
Digital model, capacity 50, 300 kg‐m, torsion speed Fixed, direction reverse, clearance between grips 0‐1000 mm grips for rounded bars 10‐30 mm & 30 to60 mm, width 40 & 60 mm (With essential accessories)
5 Fatigue Testing Machine Maximum bending moment 400 kg cm. suitable for maximum testing dia. Of specimen 10 to 60 mm (With essential accessories)
6 Bulk Density Apparatus Ring blade type, 135 mm funnel size, 5 kg/lit sand bottle capacity & ± 5 gms electronic balance calibrations.
7 Grain Moisture Meter
Principle: Capacitance, weighing device, the moister‐temperature sensor.(With essential accessories) Range: 3‐47 % (grain dependent) Repeatability: ± 0.5 % in normal moisture range for stored grains. Analysis: Whole seed analysis.
2
FMTT&PC RKVY List of Equip
Memory: 12 crop memory.Direct readout: 12 crop direct readout. Chart mode: For analysis of crops other than the 12 programmed crops. Programming: Yes, Customize the system to your choice. Display: 3 Digit large LCD display. Construction: ABS plastic‐ Non –corrosive; Aluminium. Power: 4 “AA” Alkaline batteries. Weighs: Automatic sample weighment. Temperature: Automatic Temperature Compensation (ATC) Bias: Maybe independently set by push‐button for each of 12 grains. Weight: 1.23Kgs.
8 Digital Dynamometer
0‐200 kg, 0‐1500kg with digital display unit
9 Fuel consumption measurement Device
Measurement range 5 to 1000 ml, digital display, suitable to fit to fuel supply tube.
10 Digital integrating sound level Meter
Features: Precision Type 2 instrument, Measurement range: 30 to 140 dBa, Response modes: Fast, slow, Frequency weighting:, A, C, Displays SPL, Maximum SPL. Includes: WS‐7 wind screen, 56‐990 calibrator Adopter, 56‐533 storage case.(With essential accessories)
11 Digital Load cells With Indicator system
125 kg, 500 kg, 1 tonnes, 2 tonne, 4 tonne & 12 tonne with Beam and diaphragm combination. Tension, compression and bi‐directional options. Maximum error in axial force component measurement is limited to 0.25% within a 3° angle swept through 360° around the load cell axis. Its various end‐fixing options are all inert and easily modified for direct inclusion in mechanical assemblies. Integral 4 to 20mA or ±10V output amplifiers can be fitted as an option. Other specifications Parameter Value Unit Non‐linearity ‐ Terminal ±0.05 % RL Hysteresis ±0.05 % RL Creep ‐ 20 minutes ±0.05 % AL Repeatability ±0.02 % RL Rated output ‐ Rationalised 2.0 mV/V Rationalisation tolerance (applies to single direction calibrations) ±0.1 % RL Output symmetry ±0.3 % AO
3
FMTT&PC RKVY List of Equip
Zero load output ±4 % RLTemperature effect on rated output per ºC ±0.002 % AL with capable rod ends and suitable for indicator as specification below: power source 6V sealed lead rechargeable battery bridged supply 5V dc fixed, calibration check internal shunt resistor, accuracy ±0.02 %
12 Digital Vibration Meter/personal human vibration meter
SV106‐6 Channel Hand Arm & Whole Body Human Vibration Meter including 1/1 & 1/3 Octave Analysis Includes: SC 56 USB cable, 4x AA batteries, SC 118 integrated connector, 1/1 & 1/3 Octave Analysis, SV 105, Hand‐ Arm adapter with triaxial accelerometer, SV 38V Whole –Body seat Accelerometer, micro SD card 2GB, CD with instruction and Software and Carrying case
13 Platform Type Jack
1500 to 2500 Kg capacity
14 Digital Precision balance 0‐10 and 0‐100 kg 15 Automatic diesel smoke meter Partial flow type(With essential accessories)
16 Digital relative humidity meter Range ‐ 4‐95 %(With essential accessories)
17 Digital planimeter
For area measurement(With essential accessories)
18 Temperature sensor with digital indicators (data loggers)
0‐1000 oC, 16 channels with data logger system(With essential accessories)
19 Digital cone penetrometer with data logger system
Measurement range: Range of 2 cm cone: 245 kPa to 2772 kPa (2.5 Kg to 27.5 Kg), Spring strength base area of cone: 490 N/50.0 mm (50Kg/50.0 mm), Outside dimensions: W 340x 150x H330mm(without projection) spring: 490N/ 50mm, weight: Approx. 3.7 Kg. Accessories carrying case: 1 Pce., wire brush:1 Pce., spanner: 2 Pce. Cone (2 cm2): 1 Pce., spindle 30 cm: 1 Pce. Spindle 60 cm: 1Pce., Display (Build‐in GPS): GPS measurement system: WGS‐84, GPS accuracy: Approx. 10 meter (Slandered: within 10m to 15m), display panel: LCD 20 Columns x 4 line (with backlights), Numbers of memory : 400 data set, serial communication: equipped with 8 Pin connector and serial communication port baud rate: 9600bps, Power supply: AAA alkaline dry cell (4 pcs), Compensation temperature: 0 to 40 ⁰C, Operating
4
FMTT&PC RKVY List of Equip
Humidity: 0 to 90% (no condensation), internal protection : dust proof, drip proof structure, Accessories: Communication cable for mail measuring unit: 1 pce. Computer communication cable (one Rs 232 C & 1 USB cable: 1 pce, AAA Alkline dry cell: 4 Pce. Software: Supported operating system: Microsoft windows Vista, XP, 2000:
20 Carbon pollution monitor Measurement of CO, Co2 No, So2 etc levels for Indoor air quality monitoring (With essential accessories)
21 Grip dynamometer
Digital hand Grip Dynamometer ‐ Measuring range: 5.0 to 100 kgf Minimum measurement unit: 0.1 kgf Accuracy: ±2.0 kgf Display: LCD in 3 digits
22 Digital Back & Leg Dynamometer
Measuring range: 20 to 300 kgf Minimum measurement unit: 0.5 kgf Accuracy: ±6 kgf Display: LCD in 4 digits
23 Manual Muscle Tester Measuring range: 20 to 300 kgf ,Minimum measurement unit: 0.5 kgf , Accuracy: ±6 kgf , Display: LCD in 4 digits Items displayed: The larger value and each measured value Automatic stop: Approx. 1 min after the final measurement ,Power source: Dry Battery SUM‐4 × 2 Life of each cell: Approx. 100 hr,Service temperature range: 5°C to 35°C,Dimensions: Approx.315(W) × 315(D) × 328(H) mm ,Weight: Approx. 3.7 kg (including the Weight of the handle)
24 Dust measuring Equipment Real time dust monitoring using laser/ infrared inorganic dust, different particle concentration calculation with respirable and total dust head. Rechargeable battery with minimum 6 hr battery back. Light weight portable unit. data storage facility and computer compatibility is desirable(With essential accessories)
25 Polar heart rate monitor with interface
Multiple interfaces dual heart rate processing algorithms, 32 entry data history. (With essential accessories)
26 Digital Pressure gauge
3,6 10 15 , 20 30, 40 kg/cm2 (With essential accessories)
27 Cortex‐Energy measurement system
Measurement of oxygen consumption rate(With essential accessories)
5
FMTT&PC RKVY List of Equip
28 Push pull force gauge 10 mm stroke, 3000 kgf with 2.5 kgf least count, pick hold mode type (With essential accessories)
29 Torque pick up with indicator Torque sensor: Torque sensor with non contact type data transmission, digital torque data (USB) up to 1000 Nm, Keyway shaft, rotational / static measurement, Bi‐directional measurement, Battery operated, Calibration certificate, RS 232, Digital data, speed and power output Torque Indicator: Non Contact type digital indicator above torque sensor, operational temperature range 0 to 45 degree centigrade, battery life 12 hours, auto power off, RS 232 output, Rechargeable battery with battery charger, complete with all accessories, including mounting kit and carrying case. (With essential accessories)
30 Tractor Trailer For Mini Tractor 18 hp Mitsubishi shkati two wheel trailer & For 45 to 60 hp 4 wheel hydraulic trailer with Brake & tipping arrangement
31 CAD/CAM/CAE modules for computer aided design & analysis
University plus bundle for CAD/CAM/CAE having following modules and 5 years of maintenance, along with 2 lic of online training and certificate from Tata technology, CAD/CAM/CAE Package
32 Digital plant canopy imager CI 120/121, Lances PENTAX, Image resolution’ 768x 494 pixels Interface USB” measuring time 0.5 sec. Probe size 20 x 20 mm arm length 400 mm
33 Treadmill 0‐12% elevation and 20 kmph speed and programmable. Technical data : motor‐3 Hp continuous duty, Running surface‐ 150 x 50 cm, Running belt – 2 ply, Speed‐ 1‐ 20 km/h ( adjustable in increments of 0.1 km/h), Inclination‐ 0‐12 % ( adjusted in 1% increments), Console : Display – time, distance, speed, inclination, pace, calories, pulse, display of course profile with LCD, Training programs: 20, 4 direct selection buttons for speed. Features: Heart rate measurement, chest strap incl., PC interfaces. Extras: transport wheel
6
FMTT&PC RKVY List of Equip
34 Harpenden Anthropometer and skinfold caliper
Direct and accurate reading to the nearest millimetre, range 50 to 570 mm, sliding member operating via miniature ball‐ bearing, carrying case, complete with straight and recurred branches, a spare counter and beam extension for the measuring of height up to 2 mtrs.
35 Bicycle ergometer Manually programmable, inbuilt HR rate control programme, breaking power up to 600W, colour screen, inbuilt memory and performance test and computer and USB interface, class I safety features with international standard, weight less than 50 kg and carrying capacity 150 Kg
36 Rotary Torque Sensor with data logger
With sensors 100 Nm, 500Nm, 1000Nm, 1500Nm, least count 0.02 to 0.2 Nm, Data logger (with Strain soft software and PC based data logging in excel format) for 4 channels additional accessories like portable data logger 4 channel based battery operated(With essential accessories)
37 Working Cut model of tractor
38 Working Cut model of Diesel engine
39 Hardness testing machine (for non conducting materials)
Hardness testing machine (For non conducting materials) Shore hardness tester A or D (Durometer) Suitable for determine the indentation hardness of materials form soft rubber to rigid plastic of pipes, rods, plates etc., Shore A is designed to measure the penetration hardness of rubber, elastomers and other rubber like materials such as neoprene, silicon, vinyl, soft plastics, felt, leather 8V similar materials. Shore D is designed for plastics, Formica, epoxies 8V Plexiglas, etc. Specification: Display 4 Di it 10 mm LCD, Range: 10‐90 H, Accuracy ‐t1%, Resolution:0.1 , Measurement principle Laser diffraction, Size range 0.1μm ‐ 2000μm Optical models Mie Theory and Fraunhofer Approximation including Patented Multiple Scattering correction, Lens ranges 300mm lens: 0.1 ‐ 900
40 Digital Spray droplet analyzer Optical unit microns (Dv50: 0.5 ‐ 600 microns) 750mm lens: 2.0 ‐ 2000 microns (Dv50: 5 ‐ 1600 microns) Working range 150mm at 0.5 microns extending to >1m above 5 microns Concentration range Minimum acceptable transmission: 5% (dependent on particle size range)
7
FMTT&PC RKVY List of Equip
Detection system 36 element ld, 10kHz with additional software feature keyog‐spaced silicon diode detector array, Light source 632.8 nm, 5 mW helium‐neon laser Laser Safety Class 3R laser product, Optical alignment system Automatic rapid align system, Maximum acquisition rate Continuous Mode: 1Hz, Rapid Mode: 2.5kHz as standard, Accuracy Better than +/‐ 1% on the Dv50 for NIST‐traceable latex standards Precision / Repeatability Better than +/‐ 1% COV on the Dv50 for NIST‐traceable latex standards, Reproducibility between instruments Better than +/‐ 1% COV on the Dv50 for NIST‐traceable latex standards, Measurement Triggering Internal: Based on transmission or light scattering levels, External: Based on TTL input or simple switch trigger, External device synchronization Via two TTL trigger outputs Software Minimum computer specification DELL Mini Tower PC, 2.8GHz Intel Pentium IV Processor, 512Gb RAM, 160Gb‐HDD, CD‐RW, (Supplied with system) complete with mouse, keyboard and 1x17 inch Flat Panel Monitor. One free PCI slot and one free COM port required for nasal spray actuators(With essential accessories)
41 Portable Flue Gas analyzer Portable Flue Gas Analyser Sensonic ‐1400/02, CO2/ NO/ SO2
Package content : Main adapter 100...240 VAC/18VDC, Analysis in hand‐held‐casing with sensors for 02 and CO, Utility CD (manual, FG Aplus...), Probe holder K heated, 3m, Filter, Probe pipe K/L, 300mm, 800⁰C, Smoke‐comparison‐scale and Strips for smoke deter, 40 pc, ABS madur case, Dimensions: 245(W)x90/128(H)x60(D)mm (With essential accessories)
42 a) Torque transducer. b) USB base data acquisition module. c) Application software
a) Rotating type, Range: 1500 N cm, Model: DR‐2, Make: Lorenz, Germany, Excitation: 2‐12 V dc, Sensitivity: 2 m V/V, Nominal temp. range: 5 to 50 deg C(With essential accessories) b) For acquiring data from transducer connects to computer through USB port, Model 6210, Make: National Instruments, USA. c) For data retrieving tabular display graphical display and report generation.
43 Non–Contact Photo Tachometers
Photo tachometers Specification: Range (rpm): 5 to 99,999, Accuracy: ± (0.05% rdg + 1d), Sampling Time: 1 sec> 60 rpm,
8
FMTT&PC RKVY List of Equip
Resolution: 0.1 rpm (0.5 to 999.9 rpm); 1 rpm (>1000rpm), Dimensions: 6.7x2.8x1.5” (170x27x37 mm), Weight: 8.8 oz (250g) Features: Large 5 digit LCD display is easy to read Built‐in memory recalls last MAX/MIN value stored, Auto ranging with 0.05% accuracy, Non contact measurements from 5 to 99,999 rpm, User reflective marker on object to be measured and integral light beam or accurate readings updated point every second, 2 to 6 inches (50 to 150 mm) measurement distance (depending on ambient light) Complete with 23” reflective tape, four AA batteries and case(With essential accessories)
44 Contact Tachometer Specifications:Range: 0.5 to 19,999 rpm, 0.2 to 6560 ft/min, 0.05 to 1999. 9 m/min, accuracy: ±(0.05% rdg + 1d), sampling time: 1 sec>6 rpm, Resolutions: 0.1 rpm (0.5 to 999.9 rpm): 1rpm>1000rpm, Dimensions: 6.7 x 2.8 x 1.5 “ (170x27x37mm), Weight: 9.2 oz (260g) Features: Large 5 digit LCD display is easy to read, Built in memory recalls last MAX/Min value stored, Auto ranging with 0.05% accuracy, Contact measurements from 0.5 to 19,999 rpm plus linear surface speed measures in ft/min or m/min, Simply contact rotating object with sensor tip and read measure linear surface speeds, Complete with cone tip, flat tip and spare wheel for surface speed measurements, four 1.5 V AA batteries and case
45 Rotary torque transducer a) Futak Model TRS 300, Capacity 10 Nm to 100 Nm, Rated output 2 mv/v Safe overload 150 % of R.O., Zero balance I 1 % of R.O. Rotational speed 3000 RPM max, Excitation (VDC or VAC) 5 to 11 Bridge resistance 350Ω,Maximum axial force 34 – 405 Radial force 4.5 – 50 Weight 0.5 kg
b) USB 210 Item FSH 03221, Bridge Excitation 4.5 VDC, Sampling roll 1000 sps Material resolution 24 bits, On chip memory 1 Kilo Bites Up to 16 point stored calibration, Basic software FSH 03189 (included) Extended software FSH 03189, Connector plug kit FSH 03320 (Included)
9
FMTT&PC RKVY List of Equip
48 Lathe machine: , Heavy duty lathe Size 7 Ft : Distance between centre: 1000 MM, Width bed: 325 MM, Height of Centre: 267 MM, Spindle bore: 54 MM. Size 12Ft: Distance between centre: 2500 MM, Width bed: 460 MM, Height of Centre: 400 MM, Spindle bore: 90 MM. ALL GEARED HEAD LATHE MACHINE: Flame hardened bed fitted with quick change Norton gear complete with face plate, Steady rest, Follow rest, 4 jaws dog chuck with back plate, suitable electric motor, switch, belt, wiring, coolant system with fittings. Size: 10 ½ Ft, distance between centers: 2000 MM, width of bed: 375MM, height of centre : 300 MM, spindle bore: 62 MM, Motor H.P. 3 phase 50 cycle 440 Volts: 3 HP(With essential accessories)
49 Radial Drilling machine CAPACITY‐Drilling in steel: 25‐75 mm, drilling in cast iron: 30‐90 mm, tapping in steel : 16‐56 mm, tapping in cast iron: 18‐64 mm.
46 Camera Accessories Digital SLR camera 12.3 MGP, CMOS sensors, lance AF‐S DX zoom 18‐300 mm F/3.5‐5.6 G If‐ED & flash control SB‐900 auto aperture & necessary accessories . , Accessories like Flash Gun, High Capacity Zoom Lens. Nikkon DSLR300.
47 Cam corder PMW‐EX 1R, mass:2.4 kg(5 lb 4 oz)(body), 2.8 kg (6 lb 2 oz) (with lens hood, large eye cup’ BP‐U30 battery, one SxS PRO memory card), Dimension (WxHxD) :179x199x308 mm(while recording , EVF on, LCD monitor off), Operating temperature: ‐20⁰C + 40⁰ C (+32⁰F t0 104 ⁰F), storage temperature: ‐20 ⁰C to 60⁰C (‐4⁰F t0 140 ⁰F), Battery operating time Approx. 240 min with BP‐U60 battery, approx. 120 min with Bp‐30 battery, Recording format : Video MPEG‐2 long GOP, HD HQ Mode: VRB, Maximum bit rate : 35 Mb/s, MPEG‐2 MP@HL, HD SP mode: CBR, 25 b/s, MPEG‐2 MP@H‐14, SD made : DVCAM, Audio DVCAM , Audio PCM (2ch, 16bit, 48‐kHz), Recording frame rate: PAL area: HD HQ mode: 1920x1080/50i, 25p, 1440x1080/50i, 25p, 1280x720/50p, 25p, (With essential accessories) .
10
FMTT&PC RKVY List of Equip
SPINDLE‐spindle travel or drilling depth: 125‐325 mm, Spindle taper in spindle: MT3‐MT5, number of spindle speeds: 12, range of speeds:3‐6 mm, feed: 0.08‐0.2 mm/rev. GENERAL‐ Maximum drilling radius: 265‐563mm, maximum distance from spindle to column:230‐480mm, diameter of column : 145‐330mm, vertical travel of column: 375‐710mm, horizontal travel head: 590‐1360 mm, working surface of table (rectangular): 1720x910‐500x425mm, height table above base plate: 315‐880 mm, drilling motor: 1.5‐4.5 kW, OVER ALL dimensions: length: 1180‐3660mm, width: 810‐3650mm, height: 660‐3300 mm, Approximate weight: 600‐3400 kg. (With essential accessories)
50 Shaping machine (All Geared Type)
Length of ram stroke: 660 Length of ram: 1225 Width of ram: 300 Max. Distance from table to ram: 450 Min. Distance from table to ram: 50 Vertical travel of tool slide: 140 Swiveling range to tool on either side: 60 degree Table size: 610 X 380 Horizontal travel of table : 600 Vertical Travel of table:350 Nos. of speeds:4(With essential accessories)
51 Nibbling machine Throat depth, mm: 1250 Maximum circle dia. can be cut from square blanks, mm: 1000 Net weight(Approx.), Kg: 2200 Length of stroke, mm : 2 to 10 No. of strokes per minute: 900 Maximum tool lift, mm : 25
11
FMTT&PC RKVY List of Equip
Motor 3 phase/ 440 V (HP): 552 Milling machine Table: Table area: 1450 x 305 MM, No of T slots : 3 X 15Distance between T
slots: 57 MM. Range: Longitudinal Manual/ automatic: 787 MM, Cross Manual/ automatic: 279 MM, Vertical Manual/ automatic: 533 MM. Power Feeds: Range of 3 Longitudinal feeds: 19‐51 P/M, range of 3 Cross feeds: 19‐63 P/M, range of 3 vertical feeds: 6‐12 P/M, rapid longitudinal & cross : 1066 P/M, rapid vertical: 254 P/M.Head: Taper in spindle nose, Dia of spindle nose/ at rear bearing 82, 44, Size of hole through spindle: 22, range of 9 speeds, swivel of vertical head. Work range: Distance from spindle to top of table: 0‐533, distance from centre of spindle to face of Column. Quill: Max. travel of quill (manual): 108MM, Dia of Quill: 133 MM, Head Motor 3 HP/1440 RPM, Feed Motor 3 HP/960 RPM, Coolant pump motor: 1/10 HP, Weight of Machine : 4000 kg. (With essential accessories).
53 Press brake Machine
For bend the sheet metal Capacity in Tons: 100 Bending capacity length x thick, mm :3125 x 3.25 Distance between Housing, mm: 1700 Stroke length, mm: 76 Stroke per minute : 32 Ram adjustment, mm : 40 Shut height ram stroke down, mm: 275 Table height, mm: 800 Depth of throat, mm: 275 Main motor HP: 15 Ram adjustment motor hp: 2 Die Space length x Width, mm : 3125 x 200 Machine length ( L X R),mm :3250 Machine width(F X B), mm:1750 Machine Height, mm: 3000
12
FMTT&PC RKVY List of Equip
Weight (Approx.)kg: 7800(With essential accessories)54 Power hacksaw
Specification: Cutting capacity: 200mm, Round 200 mm, Square 170 mm Saw Blade: 300 X 27 X 0.9 Blade Tension: Mechanical Saw Blade motor: 1 H.P. 960 rpm Hydraulic Motor: 1 H.P. 1440 rpm Dimensions (L X W X H) OR equivalent: 1600 X 370 X 1200(With essential accessories)
55 Stationery grinder
Power input, rpm: 1800 No load speed, rpm: 6500 Full load speed, rpm: 5100 Full load current, amperes :8.3 Weight, kg: 10.8
56 Flexible grinder
Rated voltage: 235 Watts input, W: 370 No load speed for grinding, rpm: 11500 No load speed for milling, rpm: 1200 Full load speed for grinding, rpm:6410 Full load speed for milling, rpm: 665 Full load current, amperes: 1.7 Weight, kg: 8.6
57 Portable power drill
Drilling Diameter in steel, mm:13,Drilling Diameter in aluminum, mm: 20Drilling Diameter in weed, mm: 32, Power input, W: 550 No load speed, rpm: 3000,Weight, kg: 1.95
58 Hand Shearing Machine
Cutting Capacity, mm,Sheet thickness: 3,Flat bars: 60 X 4 Round bars:9, Length of Blades,mm:400 Weight, kg: 120(With essential accessories)
13
FMTT&PC RKVY List of Equip
59 Hydraulic Pipe bending machine
Model :AMI H‐3, Capacity:1/2” to 3” Pressure in tons 15, Formers of C” class pipes : 1/2", 3/4", 1”, 1.1/4”, 1.1/2”,2”, 2.1/2” and 3” (With essential accessories)
60 Gas cutter with cylinder Cutting capacity in mild steel & carbon steels, mm: up to 75 Length of straight cuts, m : 1.8 depend on rail length Circle Cutting diameter, mm : 75‐1200 Cutting speed, mm/min. : 100‐900, Bevel cutting, degree: Up to 45 Power supply, volts: 220/240,Frequency, Hz : 50 Gas hose connection, G: ¼,Fuel gas : Acetylene or LPG Weight, kg : 9.5 (With essential accessories)
61 Hydraulic pressing machine Hydraulic Power Press 4 Pillar type, Steel fabricated body, Hand motorized type, with V‐block, pressure gauge & hose pipe Capacity : 50 tonne, Hand operated machine(With essential accessories)
62 Bench grinder Double ended bench grinder with grinding wheel at each end, complete with rotary switch, wheel guard and tool rests for 50 cycle A.C. supply. Wheel size: 250x25x19.05 MM, H.P. 1, 3000 rpm, phase ‐1, volts‐220/230.
63 CNC Turning centre
Specifications:Max chuck diameter =200 mm 1. Max dia. of the job (to be machined ) = 210 mm 2. Automatic tool changer (ATC)= Servo type 3. ATC stations = 8 stations 4. Tool changing time = 5 sec 5. Spindle motor = 7.5 hp 6. Spindle rpm = 3500 7. Tail stock = present 8. Hydraulic system = Rexroth 9. Control = fanuc. Omite 10. Make = Jyoti
Model = DX 200(With essential accessories) 64 CNC Vertical machining centre
Specifications:
1. Table size = 1100 x 750 mm 2. X travel = 750 x 500 x500 mm 3. Y travel = 750 x 500 x 500 mm 4. Z travel = 750 x 500 x500 mm
14
FMTT&PC RKVY List of Equip
5. Weight capacity = 1300 kg6. Automatic tool changer = 20 tools 7. Spindle motor = 20 hp 8. Spindle rpm = 10000 9. Accuracy = 0.004 mm 10. Tool changing time = 10 sec 11. Rapid = 1000 ipm 12. Control = HAAS 13. Make = HAAS
Model = VF2YT(With essential accessories) 65 Spot welding machine(Asiatic welder/
Electro weld) Spot welding machine foot pedal operated with manual thyristor Capacity 15 KVA. (With essential accessories)
66 Crane scale Capacity: 3 ton, Accuracy 1 kg, Dimensions: H‐495, A ‐56, B‐65, C‐32, Net wt‐13 kg. (With essential accessories)
67 All purpose wire rope electric hoist wire rope size diameter‐suitable to the capacity(10‐20), capacity‐ 3000 kg, FEM duty‐ 1Am, ISO duty M4, Lifting speed single‐4 mpm, dual fast/slow 4/1.3, No of falls Two, Motor kw main/creep 3.5, motor 1500rpm head room hook susp‐950, Head room with PT‐870, Head room with GT/ET‐870, weight hook susp.125 kg, weight with ET 3 m Lift‐185. Motor kw main/creep 3.5/1.2, motor 1500/460 rpm, head room hook susp‐950, Head room with PT‐870, Head room with GT/ET‐870, weight hook susp.135 kg, weight with ET 3 m Lift‐200.
68 Hydraulic hand pallet truck PV25 PRV‐Capacity up to 1250 kgs, Roll diameter mm: D1 ‐ 400 to 1200 mm, D2‐ 700 to 1500 mm, Fork width mm: W1‐316 to 625 mm, W2‐813 to 1102 mm.
69 Digital vernire Caliper (MITUTOYA) Accuracy: ± 0.02 mm, Resolution 0.01 mm, repeatability: 0.01 mm, Display: LCD, 500‐196 Range: 0‐150 mm (500‐196) 500‐197 Range : 0‐200 mm (500‐197) 500‐754 Range : 0‐300 mm (500‐754)
70 Digital micrometer (MITUTOYA) Or Inside micrometer range (MITUTOYA)
Range 0‐150 (345‐250) Range 0‐25 (141‐185)
71 Digital Bore gauge (MITUTOYA) Range‐50‐150 (511‐703)
15
FMTT&PC RKVY List of Equip
72 Screw threads micrometer (MITUTOYA) Range ‐0‐25 (126‐125)
73 Depth gauge micrometer (MITUTOYA) Range ‐0‐150 mm (129‐112)
74 Vernier height gauge (MITUTOYA) Range : 0‐150mm (50‐201)Accuracy: 0.02 mm
75 Bevel protector 300mm Indian/ China(MITUTOYA)
300mm Indian/ China
76 Slip gauge(MITUTOYA) Workshop grade
77 Threaded ring gauge(MITUTOYA) 20 mm, Go and No Go
78 Mitutoya combination set ‐‐
79 Mitutoya filler gauge ‐‐
80 Samtat radius gauge(MITUTOYA) Range 1.7 mm
81 Sine bar(MITUTOYA) Range :100 mmRange : 200 mm
82 Surface Plate(MITUTOYA) Size : 630 x 6320 mm Granite
83 Precision Balance (MITUTOYA) 0‐100 kg, 0.001 gm
84 Data logger Data logger having up to 8 to 15 output/inputs points/Channel. With the external storage device up to 10 GB. The data logger should be included with the various sensor of temperature having range 0 to more than 300OC, flow of water/liquid and air, humidity, speed/rpm, pressure of liquids/water, wind speed and another sensor to monitor the performance of biomass furnaces (0 to more than 15000C ) etc having high accuracy of measurement/sensing. The proposed sensor of the data logger should be operate from very small quantity of parameters to the large. The data logger should be easily interface to the computer in online mode or data collected in off line mode.
16
FMTT&PC RKVY List of Equip
85 ETC solar water heating system The solar water heating system having ETC for the maximum output
temperature of water. SWHS have to quote including the installation at
research site located in Western Vidarbha. Rate quote for the capacity of ETC
Solar water heating system is, 500, 1000, 2000 LPD respectively. The quotation
may clearly define the operation and maintenance and warranty of the
system.The supplier has to quote the cost of installation of monitoring system
/performance evaluation system to the ETC solar water heating system which
includes the data logger and the various sensors. The system having minimum
thermal losses in collector and distribution pipe of warm water.
86 Pyranometer with recorder Calibrated against an Eppley Precision Spectral Pyranometer (PSP) under natural day light conditions. Typical error under these conditions is ±5%. Sensitivity: Typically 90µA per 100 Wm‐2. Linearity: Maximum deviation of 1% up to 3000 Wm‐2. Stability: < ± 2 % change over a 1 year period. Response Time: 10µs. Temp. Dependence: 0.15 % per °C maximum. Cosine correction: cosine corrected up to 80 ° angle of incidence. Azimuth: < ± 1% error over 360° at 45 ° elevation. Tilt: No error induced from orientation. Operating temperature: ‐ 40 to 65 °C. Relative humidity: 0 to 100%. Detector: High stability silicon photovoltaic detector (blue enhanced). Sensor housing: Weather proof anodized aluminium case with acrylic diffuser and stainless steel hardware. Size: 2.38 Dia. X 2.54 cm H (0.94” x 1.0”) Weight : 28 g (1 oZ). Cable length: 3.0 m., coupled with With EM‐50 data logger and Portable Data Analyser.
ECT AIR TEMPERATURE SENSOR
HUMIDITY ACCURACY: ± 2% from 5 ‐ 90% RH, ± 3% from 90 ‐ 100% RH TEMPERATURE ACCURACY: ‐40 to ‐20°C: ± 1.0°C, 5 to 40°C: ± 0.5°C, 40 to 50°C
17
FMTT&PC RKVY List of Equip
and ‐20 to 5°C: better than ± 1.0°C HUMIDITY RESOLUTION: 0.1% RH,TEMPERATURE RESOLUTION:0.1°C, HUMIDITY RANGE: 3 to 100% RH, TEMPERATURE RANGE: ‐40°C to 50°C, SENSOR TYPE: Digital Capacitance and Thermistor, OUTPUT: I2C, OPERATING ENVIRONMENT: ‐20°C to 50°C,CABLE LENGTH:3 m, CABLE CONNECTOR TYPES: 3.5 mm "stereo" plug, SENSOR DIMENSIONS:3 cm x 1 cm, HUMIDITY/TEMP SENSOR WITH RADIATION SHIELD TEMPERATURE ACCURACY: ‐40 to ‐20°C: ± 1.0°C, 5 to 40°C: ± 0.5°C, 40 to 50°C and ‐20 to 5°C:, better than ± 1.0°C , TEMPERATURE RESOLUTION: 0.1°C, TEMPERATURE RANGE:‐40°C to 80°C, MEASUREMENT SPEED: 10 ms (milliseconds) SENSOR TYPE: Thermistor, OUTPUT: 320 ‐ 1000 mV @ 3 V excitation, OPERATING ENVIRONMENT:‐40°C to 80°C, POWER:2.5 VDC @ 2 mA, to 3.6 VDC @ 7 mA, CABLE LENGTH: 5 m, CABLE CONNECTOR TYPES: 3.5 mm "stereo" plug or stripped and tinned lead wires (3), SENSOR DIMENSIONS: 2 cm x .075 cm, RT‐1 SOIL TEMPERATURE SENSOR ACCURACY: Wind Speed: ± 5%, Wind Direction: 7°, RESOLUTION: Wind Speed: 1 mph (0.45 m/s, 1.6 km/hr), Wind Direction: 1° (0 to 355°) RANGE: Wind Speed: 0 ‐ 129n mph (58 m/s, 209 km/hr) Start Threshold: 3 mph (1.3 m/s, 4.8 km/hr, Wind Direction: 0 to 360°, MATERIAL: Wind Vane and Control Head: UV‐resistant ABS,Wind Cups: Polycarbonate, Anemometer Arm: Black‐anodized aluminium, DIMENSIONS: 18.5 in. long x 7.5 in. high x 4.75 in. wide (470 mm x 191 mm x 121 mm), WEIGHT :2 lbs. 15 oz. (1.332 kg), DAVIS CUP ANEMOMETER ACCURACY: Wind Speed: ± 5%, Wind Direction: 7°, RESOLUTION: Wind Speed: 1 mph (0.45 m/s, 1.6 km/hr), Wind Direction: 1° (0 to 355°), RANGE: Wind Speed: 0 ‐ 129n mph (58 m/s, 209 km/hr), Start Threshold: 3 mph (1.3 m/s, 4.8 km/hr), Wind Direction: 0 to 360° , MATERIAL: Wind Vane and Control Head: UV‐resistant ABS, Wind Cups: Polycarbonate, Anemometer Arm: Black‐anodized aluminium, DIMENSIONS: 18.5 in. long x 7.5 in. high x 4.75 in. wide (470 mm x 191 mm x 121 mm), WEIGHT: 2 lbs. 15 oz. (1.332 kg)
18
FMTT&PC RKVY List of Equip
87 Thermo anemometer (digital) The technical details of digital thermo anemometer was listed below:Measurement principle: Constant temperature method Range: 0 to 20 m/s with resolution 0.01m/s, Accuracy: ±5 per cent Temperature range 20 to 70 oC, Display: LCD up to 20 digit Measurement integration Time: Continuous measurement Dimension: 88x278x201mm (hxwxd), Sensor :NTC in bridge circuit
88 Color Measurementt Spectrophotometer, Make : Hunter lab Model: ColorFlex EZ
Specification: Measurement Principle: Port up or Port forward dual‐beam spectrophotometer, Geometry: Circumferential 45° illumination and 0° viewing, Spectrometer: Sealed optics; 256‐element diode array; high resolution concave holographic grating, Port Diameter/View Diameter: 31.8 mm (1.25 in) / 25.4 mm (1.00 in), Spectral Component: Excluded , Spectral Range: 400 nm – 700 nm, Spectral Resolution: < 3 nm, Effective Bandwidth: < 12 nm equivalent triangular, Reporting Interval: 10 nm, Photometric Range: 0 to 150%, Light Source: Pulsed Xenon Lamp, Number of Flashes per Measurement: 1 fl ash, Lamp Life: > 500,000 fl ashes, Measurement Time: < 1 second from button push to measurement, 2 seconds from button push to data display, Minimum Interval Between Measurements: 3 seconds, Data Views: Color Data, Color Difference Data, Tristimulus Color Plot, Spectral Data, Spectral, Difference Data, Spectral Plot, Spectral Difference Plot, USB Flash Drive Features: Backup of Setups and Data, Setup Transfer to Multiple Units, Data Export to Excel, Other Features: Pass/Fail, Average Multiple Readings, Search for Closest Standard, Illuminants: A, C, D50, D55, D65, D75, F2, F7, F11, Observers: 2° and 10°, Color Scales: CIE L*a*b*, Hunter Lab, CIE L*C*h, CIE Yxy, CIE XYZ, Color Difference Scales: ΔL*a*b*, Δlab, ΔL*C*H, ΔL*C*h, Δyxy, ΔXYZ, Indices and Metrics: E313 Whiteness (C/2° or D65/10°), E313 Tint (C/2° or D65/10°), E313 Yellowness (C/2° or D65/10°), D1925 Yellowness (C/2°), Y Brightness, Z%, 457 nm rightness, Opacity, Color Strength (Average and Single Wavelength), Gray Change, Gray Stain, Metamerism Index, Shade Number
19
FMTT&PC RKVY List of Equip
89 Colorimeter Model: CR‐400 Head and CR ‐410, Make: Konica Minolta , Illuminating/viewing system: d/0 (diffuse illumination/0° viewing angle; specular component included) (compliant with JIS Z 8722; including regular reflectance), Detector: Silicon photocells (6), Display range: Y: 0.01% to 160.00% (reflectance), Light source: Pulsed xenon lamp, Measurement time: 1 sec., Minimum measurement interval: 3 sec., Battery performance: Approx. 800 measurements (when using batteries under Konica Minolta's testing conditions), Measurement/illumination area: Φ8mm/ Φ11mm, Φ50mm/ Φ53mm, Repeatability: Within ΔE*ab 0.07 standard deviation (when the white calibration plate is measured 30 times at intervals of 10 seconds), Inter‐instrument agreement: ΔE*ab: Within 0.6 , Average of 12 BCRA Series II colors, ΔE*ab: Within 0.8, Average of 12 BCRA Series II colors, Observer: 2 degree; Closely matches CIE 1931 Standard Observer , Illuminant: *C, D65, Display: *Chroma values; color difference values; PASS/WARN/FAIL display, Tolerance judgment: * Color difference tolerance (box tolerance and elliptical tolerance), Color space/colorimetric data: * XYZ, Yxy, L*a*b*, Hunter Lab, L*C*h, Munsell (Illuminant C only), CMC (l:c), CIE1994, Lab99, LCh99, CIE2000, CIE WI/Tw (Illuminant D65 only), WI ASTM E313 (Illuminant C only), YI ASTM D1925 (Illuminant C only), YI ASTM E313 (Illuminant C only), User index (Up to 6 can be registered from computer), Storable data sets: 1,000 (Measuring head and data processor save different data), Color‐difference target colors: 100, Calibration channels: * 20 channels (ch00: White calibration; ch01 to ch19: User calibration ), Display: Dot‐matrix LCD with backlight (15 chars × 9 lines + 1 line for icon display), Interface: RS‐232 compliant (for data processor/PC)* Baud rate: 4,800, 9,600, 19,200 (bps); Set at 9600 when shipped from factory, Power source: Four AAA size alkaline or Ni‐MH batteriesAC Adapter AC‐A17 AC120V 50‐60Hz 0.4A (for N. America and Japan) AC230V 50‐60Hz 0.4A (for worldwide except N. America), Dimensions (W × H × D): 102 × 244 × 63mm, Operating temperature/humidity range: 0 to 40°C, relative humidity 85% or less with no condensation, Storage temperature/humidity range: ‐20 to 40°C, relative humidity 85% or
20
FMTT&PC RKVY List of Equip
less with no condensation, Other: LCD backlight ON/OFF function (When on, backlight stays ON for 30 seconds after last key or measurement operation)
90 Cutting force measurement Disc: 40 cm, blade mounting device, blade set with varying angles, Control panel with VFD for RPM optimization, motor 1 hp.
91 Hot air Oven Double walled outside made of G.I. finished with power coating and inner chamber made of stainless steel. Temperature is controlled by electronics microprocessor based digital temp. indicator cum controller. Temp. range: 50 ⁰C to 250 ⁰C, with accuracy of ±1⁰C. The gap between two walls is filled with glass wool. Size: 60x60x90 cm
92 Multimedia I‐station Wireless microphone : Frequency range : 740MHz ̴752 MHz , RF Output: 10 mW Speaker : 2x 60 W speaker with woofers and tweeters, , Frequency range: 40 Hz ̴ 20 KHz, output 60 W RPM/ 160 W peak, weight 3.5 Kg. Gooseneck microphone: Frequency response : 150 Hz ̴ 17 KHz, Dimensions: (WXHxD): 185x290x185mm Length: 55 Cm, Software: Description: Electric lecturer stand/ electric board KPS S/W using for class and presentation, Operation system: Microsoft windows 2000, windows XP, Windows XP, Windows Vista, Hard disk: Over 20 GB
93 Operational sound reinforcement solution
This is an attractive public address podium that features an all in one design. It has a built‐in 60 Amplifier, 60 W column speaker with one tweeter and three woofers. Flexible gooseneck microphone and lamp are provided as well. Number of input and output connections make it easy to expand its capacity. Available in white or black finish, wooden top and steel bottom; goose neck MIC length: 47 cm; lamp length: 45 cm
94 Office chair Width: 77.0 cm, Depth: 77.0 cm, Height: 132.5‐140.5 cm, Front Pivot synchro mechanism, Five position locking, Moulded foam, Swivel mechanism, Twin wheel castors.
95 Book case Four door bookcase, width: 914, depth: 320 , height : 1742.
96 Glass door storwel Width: 916, depth: 486, height: 1981.
21
FMTT&PC RKVY List of Equip
97 Lateral Filling Cabinet Four drawer LFC (with metal top) width: 900, height: 1323, depth: 450.
98 Vertical Filling Cabinet, ( Ample storage easy retrieval)
Four drawer VFC: width: 470, Height: 1320, Depth: 620.
99 Plain storwel Width: 916, depth: 486, height: 1981.
100 Executive table with accessories desk: 1800Wx900Dx750H, fixed side return desk: 1200W x 600Dx 720 H, mobile pedestal: 400 Wx560Dx 560H, joining top: 1050Wx 1200D x 750H
101 Hydraulic bearing puller with kit TMBS 150E, shaft diameter: 35‐150 mm, maximum bearing outer diameter:215 mm, maximum reach : 816 mm, capacity: up to 50 tonnes with all essential accessories
102 Bearing cum push puller BP 50, capacity 50 tonnes , use with hydraulic unit CSS 50 maximum reach 400 mm maximum spared 400mm with all essential accessories
Principal Investigator FMTT&PC, Deptt. of FPM
Dr. PDKV Akola
Head,
Department of FPM Dr. P. D. K. V. Akola