Download - サーボモータ駆動ポンプシステム - Toshiba …...サーボモータ駆動ポンプシステム 油圧射出成形機で省エネ55%実現!Servo-motor driving system
サーボモータ駆動ポンプシステム
油圧射出成形機で省エネ55%実現!
Servo-motor driving system modification
Modification achieves 55% less energy consumption by hydraulic machine
駆動モータをインダクションモータからACサーボモータに置き換えて最適回転数制御を行ない消費エネルギーを大幅低減High level energy saving is realized by using AC servo-motor exchanging with
suitable speed control system
●CO2削減に大きく寄与! This system contribute to CO2(Carbon dioxide) reduction
●大幅省エネの実現で設備投資を早期に回収 Large quantity of energy saving makes payback earlier
●油温上昇低減と作動油の寿命延長 (圧力制御弁・流量制御弁による作動油への負荷低減による) Modification leads less oil temperature rise and longer hydraulic oil life (No usage of pressure and flow control valve realizes benefits)
アンプ制御盤Electrical cabinet
改造前Before modification
サーボモータ・ギアポンプ(1)1st servo-motor with pump
サーボモータ・ギアポンプ(2)2nd servo-motor with pump
サーボモータ駆動ポンプシステムServo-motor driving system modification
Modification from conventional machine with induction motor / pump to AC servo-motor /geared pump with suitable numerical speed control realize ideal speed and pressure control
既存の成形機のインダクションモータとポンプをACサーボモータとギアポンプに交換し、回転数制御により最適圧力・流量制御を行います。
概 要 Summery
特長と確認事項 Feature and target area
■ 消費電力測定 Energy consumption measurement IS550GS(本システム2台使用) 2 motor system for IS550GS
■ 消費電力比較 Energy consumption comparison
■ 簡単改造工事……既設機のモータ・ポンプの交換を、短い工事期間で改造することができます。 Simple modification : modification required short term by exchanging pump and motor ■ 対 象 機 種……IS-GS・GTシリーズ機(280GS~550GS・650GT~1050GT) Target machine : IS-GS and IS-GT series machine (280GS-550GS, 650GT-1050GT)■ 電 源 電 圧……国内AC200V・国外AC400V仕様となります。 Voltage : AC200V for domestic and AC400V for abroad
成形品によっては省エネ効果が異なります。Energy saving rate is varied by molding condition
基準Base
55%
省エネ率*Energy saving ratio
9.17
20.36
1ショット当りの消費電力(kW)1 cycle time energy consumption
ACサーボモータ・ポンプAC servo-motor / pump
インダクションモータ・ポンプInduction motor / pump
サーボモータでの最適圧力・流量制御によるローデング中の省エネEnergy saving by suitable control during pump loading period
冷却中などアンロード中のサーボモータの低速回転数制御による大幅な省エネLarge amount of energy saving during un-loading period (ex. cooling time) by low motor speed
1CYCLE 59.88sec
標準モータ・ポンプ Conventional styleサーボモータ・ポンプ Servo-motor style
昇圧Clamppressurerise
時間〔s〕 Time (sec)
消費電力〔kW〕
Energy
consumption
〔kW〕
射出 Injection
計量 Charge 押出 Ejection冷却Cooling
型開Moldopen
型開Moldclose
昇圧Clamppressurerise