光スイッチ SMファイバ、PMファイバ! 可視光~通信波長帯域、大口径ファイバに対応可能
!!!!!!!!!!!!!!!!!アプリケーション:!Leoni社のスイッチは通信・計測・製造工程のモニタリング・医科学等様々な分野でご利用頂いております。!!光学特性:! ! ! ! ! ! ! 信頼性:!・低挿入損失! ! ! ! ! ! ・優れた長期信頼性!・低PDL! ! ! ! ! ! ! ・Telcordia GR-1073に準拠した試験!・優れた繰り返し特性 を実施!・低バックリフレクション! ! ! ! ・製品寿命10^8切替サイクル!・広帯域仕様で対応可能!・高速切替速度 2.0ms!
!!!
!!!1x16シングルモード光スイッチ内部構造 1x4マルチモード光スイッチ内部構造!
〒108−0071!東京都港区白金台5−13−26−501 TEL.:03−3445−4755!
オプトワークス株式会社 メールアドレス:[email protected]
REV 07 / 03_ 2010
1
Fiber optic Switch eol 1x2 •••• 1x4 •••• 2x2
eol 1x8 •••• 1x12 •••• 1x16
OPERATION MANUAL
REV 07 / 03_ 2010
14
Handling Instructions for Fiberoptic Components
CAUTION! Any extreme stresses onto the optical cable could degrade the
optical performance or damage the fiber.
• Do not pull on the fibers ! • Never bend an optical cable more sharply than a 35mm radius! • Bending over any sharp edges may damage or break the fiber! • Avoid excessive heat near cables!
• All optical connectors should remain covered with dust cups in place when not in use. Cleaning & Mating Instructions for Optical Connectors
• Clean both connectors prior to mating by using a high-grade isopropyl alcohol and a cotton swab.
• Allow connectors have to dry before mating. • Insert the connector ferrule into the appropriate adapter smoothly. • Do not over-tighten the connectors.
• Specifications for the eol series switches are based on an optimal connection. If the resulting values are unacceptable, please repeat the cleaning procedure and start again.
FiberConnect® FiberSwitch® FiberSplit®FiberTech® FiberSwitch®
www.leoni-fiber-optics.com
325
The Fiber optical switches from LEONI are based on a unique
patented micromechanical / microoptical concept. They provide
excellent parameters, high flexibility and long term stability
for various applications. The switches are available for a broad
wavelength range from the ultraviolet to infrared and can be
fabricated with practically all possible fiber types.
The switches can be easily integrated into an existing system
due to maximum input power of 450 mW and standard inter-
faces (RS232, I2C, TTL, USB, optional Ethernet). High channel
numbers can be achieved without cascading, e. g. eol 1×16.
With cascading almost any desired combination is possible.
Optical properties�Q Low insertion loss�Q Low polarization loss (eol-series)�Q Excellent repeatability�Q High optical isolation�Q Extremely low back reflection (eol-series)�Q Wide to ultrawide (mol series) spectral range�Q Short switching times starting from 2.0 ms
Housing properties�Q Small, rugged metal housing�Q Flexible housing options, compact housing or tabletop housing�Q Connector assembly in the plant�Q The integrated microcontroller provides various interfaces and
control signals �Q Low power consumption
Relialbility�Q Excellent long-term reliability,
tested according to Telcordia GR-1073�Q Lifetime > 108 switching cycles
Schematic diagram of a fiber optical singlemode switch 1×16
fiber arraylens array
beam deflecting components
retro-reflecting prism
Schematic diagram of a fiber optical multimode switch 1×4
translation 1 translation 2
Opt
ical
com
pone
nts
10
FiberConnect® FiberSwitch® FiberSplit®FiberTech® FiberSwitch®
www.leoni-fiber-optics.com
325
The Fiber optical switches from LEONI are based on a unique
patented micromechanical / microoptical concept. They provide
excellent parameters, high flexibility and long term stability
for various applications. The switches are available for a broad
wavelength range from the ultraviolet to infrared and can be
fabricated with practically all possible fiber types.
The switches can be easily integrated into an existing system
due to maximum input power of 450 mW and standard inter-
faces (RS232, I2C, TTL, USB, optional Ethernet). High channel
numbers can be achieved without cascading, e. g. eol 1×16.
With cascading almost any desired combination is possible.
Optical properties�Q Low insertion loss�Q Low polarization loss (eol-series)�Q Excellent repeatability�Q High optical isolation�Q Extremely low back reflection (eol-series)�Q Wide to ultrawide (mol series) spectral range�Q Short switching times starting from 2.0 ms
Housing properties�Q Small, rugged metal housing�Q Flexible housing options, compact housing or tabletop housing�Q Connector assembly in the plant�Q The integrated microcontroller provides various interfaces and
control signals �Q Low power consumption
Relialbility�Q Excellent long-term reliability,
tested according to Telcordia GR-1073�Q Lifetime > 108 switching cycles
Schematic diagram of a fiber optical singlemode switch 1×16
fiber arraylens array
beam deflecting components
retro-reflecting prism
Schematic diagram of a fiber optical multimode switch 1×4
translation 1 translation 2
Opt
ical
com
pone
nts
10
光スイッチ SMファイバ、PMファイバ! 可視光~通信波長帯域、大口径ファイバに対応可能 !!Leoni社の光スイッチは独自の技術のマイクロメカニカル・マイクロオプティカルコンセプトに基づいて設計されています。非常に優れた特性、長期信頼性を有し様々なアプリケーションでご利用頂いています。スイッチはUV~赤外光まで、様々なファイバに対応し製作できます。(SMF,PMF、大口径マルチモードファイバまで、)!
!こちらのスイッチのはPINを有しており、標準付属のソケットをこのピンにケーブル(RS232&ACアダプタ)を接続するだけで、そのままパソコンで簡単に制御可能です。ご関心の方はデモ器の貸し出しが可能ですので、ご相談下さい。!!!!!!
シングルモードファイバ光スイッチ sol 1x2, 1x4, 2x2!!スぺクトラルレンジ VIS! モデル! NIR Iモデル NIR IIモデル IRモデル
動作波長! 400-670nm 600-850nm 900-1200nm 1260-1380nm/!1480-1650nm
最大挿入損失(typ) dB
2…2.5dB 1.4(0.9) 1.4(0.9)! 1.0(0.7)
リターンロス dB >40(55*) >55 >60 >60
クロストークdB =/÷−55
リピータビリティ =/<0.01 =/<0.01 =/<0.01 =/<0.005
PDL =/<0.05
切替速度 ms =/<2
寿命保証 >10^8 サイクル
切替周波数(s^-1) =÷<50
電圧(V) 5
消費電力(mW) <450
動作温度 ℃ 0~+60
保存温度 ℃ ー40~+80
寸法 124x56x13mm 75x50x13mm
〒108−0071!東京都港区白金台5−13−26−501 TEL.:03−3445−4755!
オプトワークス株式会社 メールアドレス:[email protected]
REV 07 / 03_ 2010
14
Handling Instructions for Fiberoptic Components
CAUTION! Any extreme stresses onto the optical cable could degrade the
optical performance or damage the fiber.
• Do not pull on the fibers ! • Never bend an optical cable more sharply than a 35mm radius! • Bending over any sharp edges may damage or break the fiber! • Avoid excessive heat near cables!
• All optical connectors should remain covered with dust cups in place when not in use. Cleaning & Mating Instructions for Optical Connectors
• Clean both connectors prior to mating by using a high-grade isopropyl alcohol and a cotton swab.
• Allow connectors have to dry before mating. • Insert the connector ferrule into the appropriate adapter smoothly. • Do not over-tighten the connectors.
• Specifications for the eol series switches are based on an optimal connection. If the resulting values are unacceptable, please repeat the cleaning procedure and start again.
光スイッチ SMファイバ、PMファイバ! 可視光~通信波長帯域、大口径ファイバに対応可能 !!シングルモードファイバ光スイッチ eol 1x8, 1x12, 1x16, 2x4, 2x8!!
!!偏波保持ファイバ光スイッチ eol 1x2 PM, 1x4 PM, 1x8 PM, 1x12 PM, 1x16 PM !
スぺクトラルレンジ VIS! モデル! NIR Iモデル NIR IIモデル IRモデル
動作波長! 400-670nm 600-850nm 900-1200nm 1260-1380nm/!1480-1650nm
最大挿入損失(typ) dB
1.4(0.9)dB 1.4(0.9) 1.4(0.9)! 1.0(0.7)
リターンロス dB >40 >55 >60 >60
クロストークdB =/÷−55
リピータビリティ =/<0.01
PDL =/<0.1
切替速度 ms =/<2
寿命保証 >10^8 サイクル
切替周波数(s^-1) =÷<50
電圧(V) 5
消費電力(mW) <450
動作温度 ℃ 0~+60
保存温度 ℃ ー40~+80
寸法 124x56x13mm
スぺクトラルレンジ VIS! モデル! NIR Iモデル NIR IIモデル IRモデル
動作波長! 400-670nm 600-850nm 900-1200nm 1260-1380nm/!1480-1650nm
最大挿入損失(typ) dB
1.4(0.9)
リターンロス dB >40 >55 >55 >60
クロストークdB =/÷−55
リピータビリティ =/<0.01
PER dB 18(22) 20(22) 20(22) 20(25)
切替速度 ms =/<2
スぺクトラルレンジ
〒108−0071!東京都港区白金台5−13−26−501 TEL.:03−3445−4755!
オプトワークス株式会社 メールアドレス:[email protected]
REV 07 / 03_ 2010
14
Handling Instructions for Fiberoptic Components
CAUTION! Any extreme stresses onto the optical cable could degrade the
optical performance or damage the fiber.
• Do not pull on the fibers ! • Never bend an optical cable more sharply than a 35mm radius! • Bending over any sharp edges may damage or break the fiber! • Avoid excessive heat near cables!
• All optical connectors should remain covered with dust cups in place when not in use. Cleaning & Mating Instructions for Optical Connectors
• Clean both connectors prior to mating by using a high-grade isopropyl alcohol and a cotton swab.
• Allow connectors have to dry before mating. • Insert the connector ferrule into the appropriate adapter smoothly. • Do not over-tighten the connectors.
• Specifications for the eol series switches are based on an optimal connection. If the resulting values are unacceptable, please repeat the cleaning procedure and start again.
光スイッチ SMファイバ、PMファイバ! 可視光~通信波長帯域、大口径ファイバに対応可能
!尚、PMF仕様のスイッチで、動作波長が400−670nm、488−670nmと広い帯域の製品のご提供も可能ですので、ご希望でしたらご相談下さい。!!!!!!!!!!!!!!! ! ! ! テーブルトップ筐体モデル外観!!!マルチモードファイバ光スイッチ!・UV−可視、可視ー赤外、広帯域モデル等スぺクトラルレンジを波長域をご選定頂きます。!・スペクトロスコピー用途として低エタロン効果オプションを選定頂けます。!・ファイバタイプ をご選定頂けます。(GIファイバ、ステップインデックスファイバ、50um, 62.5um, 100um, 200um, 400um, 600um, 800umのコア径の選択が可能です。又、ご要望に応じてお使いのファイバでカスタム製作することも可能ですので、ご相談下さい。!
寿命保証 >10^8 サイクル
切替周波数(s^-1) =÷<50
電圧(V) 5
動作温度 ℃ 0~+60
保存温度 ℃ ー40~+80
寸法 124x56x13mm 又は、75x50x13mm
VIS! モデル! NIR Iモデル NIR IIモデル IRモデルスぺクトラルレンジ
コア径 50-100um
動作波長! ご利用のファイバ特性に依存します。
ch 数! 1~4 5~16
コア径
〒108−0071!東京都港区白金台5−13−26−501 TEL.:03−3445−4755!
オプトワークス株式会社 メールアドレス:[email protected]
REV 07 / 03_ 2010
14
Handling Instructions for Fiberoptic Components
CAUTION! Any extreme stresses onto the optical cable could degrade the
optical performance or damage the fiber.
• Do not pull on the fibers ! • Never bend an optical cable more sharply than a 35mm radius! • Bending over any sharp edges may damage or break the fiber! • Avoid excessive heat near cables!
• All optical connectors should remain covered with dust cups in place when not in use. Cleaning & Mating Instructions for Optical Connectors
• Clean both connectors prior to mating by using a high-grade isopropyl alcohol and a cotton swab.
• Allow connectors have to dry before mating. • Insert the connector ferrule into the appropriate adapter smoothly. • Do not over-tighten the connectors.
• Specifications for the eol series switches are based on an optimal connection. If the resulting values are unacceptable, please repeat the cleaning procedure and start again.
光スイッチ SMファイバ、PMファイバ! 可視光~通信波長帯域、大口径ファイバに対応可能
!!
最大挿入損失(typ) dB <1.0(0.7) <2.0(1.4)
クロストークdB <-60
リピータビリティ 0.03
切替速度 ms 5
寿命保証 >10^8 サイクル
切替周波数(s^-1) =÷<50
電圧(V) 5
消費電力、mW <450
動作温度 ℃ 0~+60
保存温度 ℃ ー40~+80
50-100umコア径
コア径 200um 400um 600um! 800um!
動作波長!
ご利用のファイバ特性に依存します。
ch 数! 1~4 5~16 1~4 5~16 1~4 5~16 1~4 5~16
最大挿入損失(typ) dB
<1.0(0.7) <2.0(1.4) <1.0(0.7) <2.0(1.4) <1.0(0.7) <2.0(1.4) <1.0(0.7) <2.0(1.4)
クロストークdB
<-55 <-45 <-40 <-40
リピータビリティ
0.03
切替速度 ms
5 10 20 20
寿命保証 >10^8 サイクル
切替周波数(s^-1)
=÷<50
電圧(V)
5
消費電力、mW
<450
コア径
〒108−0071!東京都港区白金台5−13−26−501 TEL.:03−3445−4755!
オプトワークス株式会社 メールアドレス:[email protected]
REV 07 / 03_ 2010
14
Handling Instructions for Fiberoptic Components
CAUTION! Any extreme stresses onto the optical cable could degrade the
optical performance or damage the fiber.
• Do not pull on the fibers ! • Never bend an optical cable more sharply than a 35mm radius! • Bending over any sharp edges may damage or break the fiber! • Avoid excessive heat near cables!
• All optical connectors should remain covered with dust cups in place when not in use. Cleaning & Mating Instructions for Optical Connectors
• Clean both connectors prior to mating by using a high-grade isopropyl alcohol and a cotton swab.
• Allow connectors have to dry before mating. • Insert the connector ferrule into the appropriate adapter smoothly. • Do not over-tighten the connectors.
• Specifications for the eol series switches are based on an optimal connection. If the resulting values are unacceptable, please repeat the cleaning procedure and start again.
光スイッチ SMファイバ、PMファイバ! 可視光~通信波長帯域、大口径ファイバに対応可能
!!又、シングルモードファイバとマルチモードファイバを一つの筐体に組み込むことも可能です。又、1x400等の多チャンネル光スイッチも製作可能ですので、ご関心のある方はどうぞご相談下さい。!
� !
動作温度 ℃
0~+60
保存温度 ℃
ー40~+80
200um 400um 600um! 800um!コア径
〒108−0071!東京都港区白金台5−13−26−501 TEL.:03−3445−4755!
オプトワークス株式会社 メールアドレス:[email protected]
REV 07 / 03_ 2010
14
Handling Instructions for Fiberoptic Components
CAUTION! Any extreme stresses onto the optical cable could degrade the
optical performance or damage the fiber.
• Do not pull on the fibers ! • Never bend an optical cable more sharply than a 35mm radius! • Bending over any sharp edges may damage or break the fiber! • Avoid excessive heat near cables!
• All optical connectors should remain covered with dust cups in place when not in use. Cleaning & Mating Instructions for Optical Connectors
• Clean both connectors prior to mating by using a high-grade isopropyl alcohol and a cotton swab.
• Allow connectors have to dry before mating. • Insert the connector ferrule into the appropriate adapter smoothly. • Do not over-tighten the connectors.
• Specifications for the eol series switches are based on an optimal connection. If the resulting values are unacceptable, please repeat the cleaning procedure and start again.