Download - Formceal P3PLA-2 Fold-V3 (Col)
FORMCEAL P3PL/ATORCHED ON WATERPROOFING MEMBRANE
FORMCEAL P3PL/ATORCHED ON WATERPROOFING MEMBRANE
FORMCEAL P-3-PL/A - A TORCHED
ON WATERPROOFING MEMBRANE,
IS BASED ON A DISTILLED BITUMEN
COMPOUND MODIFIED WITH APP
PLASTOMERIC POLYMERS.
SPECIAL FEATURES
AREAS OF USAGE
LA SALLE SCHOOL - SINGAPORE
Polyester ReinforcedIncreases strengthen and prevents membrane wrinkling during application Temperature ResistanceWithstands high and low temperatures and temperature
method
DurabilityResistant to bacteria, mold, perforation and tearing. Excellent elongation and strength
Flexibility
within the substrate
Low Flammability
“
”
““interlaid spun bonded
““polyester.
“The standard Formceal P-3-PL/A is supplied in roll
form.
Its underside is covered with polyethylene that
melts.
• Roof• Gutters• Decks and Patios• Driveways• Bridges and viaducts
DIAGRAM OVERVIEW
“
”
“interlaid spun bonded
““The standard Formceal P-3-PL/A is supplied in roll
form.
Its underside is covered with polyethylene that
melts.
WHAT IS THE DIFFERENCE BETWEEN THE TWO?
Formceal P-3-PL must be concealed with tiles, gravel or a layer of concrete for maximum durability.
Formceal P-3-PL-A has an aggregate chip surface that improves weather resistance of the product, allowing it to be used in exposed situations.
FORMCEAL P3PL/A TORCH-ON WATERPROOFING
MEMBRANE C/W A LAYER OF PRIMER
MESH REINFORCEMENT (OPTIONAL)
25MM THK EXTRUDED POLYSTYRENE BOARD
MIN 38MM CEMENT AND SAND SCREED TO FALL
300MM
150MM LAP WITH TRAFFIGARD LIQUID APPLIED WATERPROOFING MEMBRANE
REINFORCED CONCRETE ROOF SLAB
WARRANTY INFORMATION Only Hitchins’ trained applicators are approved to undertake all application work. Hitchins products carry a long-term warranty for both materials and workmanship. The warranty is further backed by Hitchins International Fidelity Fund. Please check with our local applicators if
FORMCEAL P3PL/ATORCHED ON WATERPROOFING MEMBRANE
DATA SPECIFICATION SHEET
DESCRIPTION
“interlaid spun bonded
““The standard Formceal P-3-PL/A is supplied in roll
form.
Its underside is covered with polyethylene that
melts.
ASIA’S LEADING
BUILDING PROTECTION
SPECIALIST
spun bound polyester it has excellent elasticity and strength properties.
PRODUCT SPECIFICATION
TYPE: membrane with coloured chips for exposed application.ROLL SIZE: 10m long by 1m wide.
PACKING SIZE: Available as individual rolls or in pallets.
NOMINAL WEIGHT: 5 kg/m2
DIMENSIONAL STABILITY (SS 374): 0.04%
RESISTANCE TO LEAKAGE AT JOINTS (SS 374): No leakage at joints
TENSILE STRENGTH (SS 374): 6.56 N/mm2
ELONGATION (SS 374): 62%
WATER ABSORPTION (SS 374): 0.75%
PLIABILITY (SS 374): No visible surface rupture
TENSILE STRENGTH AT JOINTS (SS 374): Failure occured outside joint
WATER VAPOUR TRANSMISSION (SS 374): 4.15 g/m2/hrs
HYDROSTATIC PRESSURE RESISTANCE TEST AT 3 BARS (SS 374): No leakage
SUBSTRATE PREPARATION
Make sure that the substrate is clean, dry and free of dirt and loose particles.
APPLICATION
Application of this product requires special skills and experience, and should be carried out by licensed and trained applicators.This product may be applied directly over the substrate or old membranes. In cases where this product is applied over existing
Before the rolls are applied, it is advisable to mark the substrate in a grit pattern to ensure the rolls are laid in straight and even lines.
As the rolls are rolled out, they are adhered by using a gas torch to heat weld theoverlapping areas of the rolls together and also to stick the rolls onto the substrate.The rolls should overlap each other by 75cm and join onto the next roll.
Water ponding can commence immediately after the laps, joints, details, terminations, etc are inspected.
HEALTH & SAFETY
extinguisher nearby.
Revision AAll data given and statements and recommendations made herein are base upon our research and experience and are
all other issues.
Place Product
Sample HereHitchins (FE) Marketing Pte Ltd
Telephone: (65) 6861 1177Facsimile: (65) 6863 4240
Email: [email protected]
MAJOR PROJECTS
APPLICATION & INSTALLATION
Amway HQ - Malaysia Ateneo University - Manila, Philippines Bukit Tinggi Resort - Malaysia
Hume Park 1 - Singapore Rockwell Center - Manila, Philippines Myriad Building - Manila, Philippines
Maplewood - Singapore Castle Green - Singapore Regent Grove - Singapore
1. Application of primer 2. Overlap membranes 3. Torching of membrane
4. Termination detail 5. Concrete plinth detail 6. Completed Roof