Download - FTTx Solution Litech
www.litech.cc
www.litech.cc
www.litech.cc www.apspower.cc
• Company Profile
Established in 1999, Advanced Network Solutions Sdn Bhd (Advancednet) has developed a successful synergy between
the evolving global ICT requirements and innovative technical solutions with our proudly presented brands - LITECH and
APS.
With our Corporate Headquarters established in our 2 acres plant in Shah Alam, Malaysia. Advancednet has also
established our regional presence that includes Sales Office, Warehousing and Assembly Plants in Indonesia, Thailand,
Philippines and Myanmar. With our continue pursue on providing a cost-effective production and solutions to our clients,
Advancednet also has a Joint-Venture Factory in Changzhou, China. Accredited with ISO9001, our product also tested
and certified by SIRIM (Malaysia), RISTI (Indonesia), UL and etc.
Being the preferred telecom and networking solution provider in the region, we are offering a wide range of
comprehensive products including Fiber Optics, Coaxial, RF, Baluns, Voice, Data, DSX, Racking system, DDF, Installation
Material and Power solutions. With our in-house designing expertise and manufacturing facilities, we are capable of
offering customized products as well as competent in developing more functional and superior products.
LITECH is not only being one of the most preferred brands among the telecommunication industry in Southeast Asia but
also a well-known brand Internationally. Throughout the past 15 years and now LITECH is still continuously being a high
profile brand to the Telecommunication Operators as well as Telecommunication Equipment Manufacturers in the
region. In addition, our product has also been widely used in more than 40 countries.
Our success is driven by our commitment to offer the best solutions to our client, fulfilling their requirements and
exceeding their expectations at all time. We are also determined to provide the finest quality yet cost effective
solutions to our customers by continuous developing and improving our products.
www.litech.cc www.apspower.cc
• Land Area : 2 Acres• Build Up : 90,000 Sq ft • Total Employee : > 400 Staffs
www.litech.cc www.apspower.cc
HUAWEI
2013 - BEST SERVICE DELIVERY
2011 - BEST DELIVERY SUPPORT (GOLD) - ENGINEERING SERVICE
2010 - EXCELLENT CO-OPERATION
2009 - VALUED BUSINESS PARTNER
2009 - BEST CO-OPERATION - ENGINEERING SERVICE
2008 - EXCELLENT MATERIAL SUPPLY & DELIVERY AWARD
2008 - LONG TERM CO-OPERATION PARTNER
• Awards
www.litech.cc www.apspower.cc
ZTE
• Awards
2011 - OVERSEAS REGIONAL BEST PARTNER
2015 - BEST MATERIAL SUPPLIER
www.litech.cc www.apspower.cc
• Awards
2006 - ENTREPRENUER AWARD‘EXCELLENT BRAND’
2007 - GOLDEN BULL AWARD‘OUTSTANDING SME’
www.litech.cc www.apspower.cc
• Major On Going Contracts
HUAWEI ZTE NEC SIAE MICROELETTRONICA NOKIA ERICSSON ABN NETWORK SACOFA TIMECOM
: YEARLY SUPPLY CONTRACT : YEARLY SUPPLY CONTRACT : YEARLY SUPPLY CONTRACT : YEARLY SUPPLY CONTRACT : YEARLY SUPPLY CONTRACT : YEARLY SUPPLY CONTRACT : SUPPLY CONTRACT: YEARLY SUPPLY CONTRACT: SUPPLY CONTRACT
www.litech.cc www.apspower.cc
Fiber Optic
Structured Cabling Solutions
Racks Cabinet Coaxial
120ohm DDF Solutions Balun
RF & Wireless Voice Solutions
Installation Accessories
ADVANCED NETWORK SOLUTIONS SDN BHDLot 202, Jalan TUDM, Kg Baru Subang, 40150 Shah Alam, Selangor,Malaysia.
Tel : +603-7845 6133
Advancednet (Philippines) Inc.Philflex Compound, 607 Mercedes AvenueBrgy. San Miguel, Pasig City, Philippines
Tel : +632-2342074
PT.ADVANCEDNET INDONESIAKompleks PRIMA CENTER I Blok A-9
Jl. Pool PPD Pesing Poglar No.11Jakarta 11710 - Indonesia Tel : +6221 5437 6801-02
Litech (Thailand) Co., Ltd.111/262 Moo 2 Cheangwattana Road,
Bangpood, Prakkred,Nontaburi 11120, Thailand.
Tel No : +662-116 9014
Power
All Product Specifica on is protected by copyright. Specifica on subject to change without prior no ce.www.litech.cc
PRODUCT SPECIFICATION.........................................................................................................................
1.0 General
This specifica on covers the design and performance of the drop cables to be used in FTTH applica on.
1.1 Cable Descrip on2 Core LSZH Drop Cable with singlemode G657A fiber.
1.2 QualityLitech ensures a con nuing level of quality in our cable products through several programs including ISO 9001.
1.3 ReliabilityLitech ensures product reliability through rigorous qualifica on tes ng to assure the cable’s performance and durability in the field environment.
1.4 Reference
1.5 Working Condi on• Transporta on and storage temperature: -40°C~+60°C• Installa on temperature: -30°C~+60°C• Opera on temperature: -40°C~+60°C
1.6 Minimum Allowable Bending Radius• Sta c: 10mm• Dynamic: 20mm
1.7 Life TimeOp cal fiber cables supplied in compliance with the specifica ons can be capable of withstanding the typical service condi on for a period of twenty-five (25) years without detriment to the transmission or opera on and maintenance characteris cs of the cable.
ITU-T G.657IEC 60794-1-1IEC 60794-1-2IEC 60794-2IEC 60794-2-20IEC 60332-2-2IEC 61034-2
IEC 60754-1
Characteris cs of a bending loss insensi ve single mode op cal fiber and cable for the access networkOp cal fiber cables- part1-1-Generic specifica on-GeneralOp cal fiber cables- part1-2-Generic specifica on-Basic op cal cable test procedureOp cal fiber cables- part2- Indoor cables-Sec onal specifica onOp cal fiber cables- part2-20- Indoor cables-Family specifica on for mul -fiber op cal distribu on cablesIEC 60332-2_2 Tests on electric and op cal fibre cables Under Fire Condi onMeasurement of smoke density of cables burning under defined condi ons - Part 2: Test procedure and requirementsTest on gases evolved during combus on of materials from cables; part 1: determina on of the amount of halogen acid gas
Fiber Optic
Product :
Op cal Fiber Cable - Drop Cable G657ADocument No. : 1.1.15.1_Vr3 Rev1.1
Page No : 1 of 5
IEC 60794-1-1 Op cal fiber cables- part1-1-Generic specifica on-General
IEC 60794-2 Op cal fiber cables- part2- Indoor cables-Sec onal specifica on
IEC 60332-2-2 IEC 60332-2_2 Tests on electric and op cal fibre cables Under Fire Condi on
IEC 60754-1 Test on gases evolved during combus on of materials from cables; part 1: determina on of the amount of halogen acid gas
All Product Specifica on is protected by copyright. Specifica on subject to change without prior no ce.www.litech.cc
PRODUCT SPECIFICATION.........................................................................................................................
Fiber Optic
2. Op cal Fiber In Cable (ITU-G657A1)
Cladding diameterCladding non-circularityCoa ng diameter
Fiber curl (Radius)Mode field diameter at 1310 nmCore concentricity errorA enua on at 1310 nmA enua on at 1380 nmA enua on at 1550 nmA enua on at 1625 nmDispersion in 1288 – 1339 nmDispersion in 1271 – 1360 nmDispersion at 1550 nmZero dispersion wavelengthZero dispersion slopeCable cut-off wavelengthPolariza on mode dispersion individual fiberPolariza on mode dispersion design link value(M=20, Q=0.01%)Proof stress levelMacro-bend loss(10 turns, 15mm radius,)Macro-bend loss(1 turns, 10mm radius,)
125.0 ± 0.7 μm≤ 1.0 %245±10 μm(Before Colored)250 ± 15 μm (Colored)≥ 4 m8.6-9.5 ± 0.4 μm≤ 0.5 μm≤ 0.35 dB/km≤ 0.35 dB/km≤ 0.21 dB/km≤ 0.23 dB/km≤ 3.5 ps/(nm·km)≤ 5.3 ps/(nm·km)≤ 18 ps/(nm·km)1300 – 1324 nm≤ 0.092 ps/(nm2·km)≤ 1260 nm≤ 0.2 ps/�km≤ 0.1 ps/�km
≥100kpsi (0.69 GPa)≤ 0.25 dB at 1550nm≤ 1 dB at 1625nm≤ 0.75 dB at 1550nm≤ 1.5 dB at 1625nm
≤ 0.40 dB/km≤ 0.40 dB/km≤ 0.30 dB/km≤ 0.32 dB/km
GeometricalCharacteris cs
Op calCharacteris cs
MechanicalSpecifica on
Category Descrip onSpecifica on
Before cable A er cable
Product :
Op cal Fiber Cable - Drop Cable G657ADocument No. : 1.1.15.1_Vr3 Rev1.1
Page No : 2 of 5
All Product Specifica on is protected by copyright. Specifica on subject to change without prior no ce.www.litech.cc
PRODUCT SPECIFICATION.........................................................................................................................
Fiber Optic
Product :
Op cal Fiber Cable - Drop Cable G657ADocument No. : 1.1.15.1_Vr3 Rev1.1
Page No : 3 of 5
FRP
Op cal fiber
Sheath
Strength element
Outer sheath
Cable diameter(mm) Approx.Cable weight(kg/km) Approx.
MaterialDiameter(mm)CountMaterialColor
FRP0.5±0.1
2LSZH
White/Beige/Black3.0(±0.2)*2.0(±0.2)
9.0 ±0.1 kg/km
A er cableA er cableA er cable
3.2.2 Dimensions and Descrip ons of Cable Construc ons
3.2.3 Mechanical Performance of Cable
3.2.4 Color Code of the Fiber
Each fiber can be iden fiable throughout the length of the cable in accordance with the following color sequence. Fiber color in each tube starts from No. 1 Blue.
100 50 1000 500
Tensile performance(N) Crush(N/100mm)Short term Short termLong term Long term
No. 1 2
Color Blue Yellow
3.0 Op c Cable
3.1 General Design
Op cal fibers are posi oned in the centre. Two parallel strength elements are place at the two sides. Then, the cable is completed with a black LSZH sheath. FRP are applied as strength element. LSZH sheath is applied over the cable core.
3.2 Construc on
3.2.1 Cross Sec on of Cable
All Product Specifica on is protected by copyright. Specifica on subject to change without prior no ce.www.litech.cc
PRODUCT SPECIFICATION.........................................................................................................................
Fiber Optic
Product :
Op cal Fiber Cable - Drop Cable G657ADocument No. : 1.1.15.1_Vr3 Rev1.1
Page No : 4 of 5
3.3 Mechanical, Electrical and Environmental Test Characteris csof the Fiber
Tensile performance
Crush
Impact
Bend
Repeated bending
Cable bending at low temperature
Cable torsion
Cable kink
Temperature cycling
Flame propaga onEmission of smokeEmission of corrosivegasesOtherparameters
Item Test Method RequirementsIEC 60794-1-2-E1Load: 80N or weight of 1 km cable,whichever is greater.Cable length under tension: Not less than 50m.Dura on of load sustain: 5min.Velocity of transfer device: either 100 mm/minDiameter of chuck drums and transfer devices:20 mes cable diameterIEC 60794-1-2-E3Load: 1000NDura on of load: 1minLength between test loca ons: 500 mmIEC 60794-1-2-E4Striking surface Radius: 12.5mmImpact energy: 1JNumber of impacts: at least 3, each separated at least 500 mmHeight:1mIEC 60794-1-2-E11AMandrel radius: ± 15 mes cable diameterTurns:10Cycles:6IEC 60794-1-2-E6Bending radius: 30 mes cable diameterCycles: 300Mass of weights: 4 kgIEC 60794-1-2-E11ABending radius: 10 mes cable diameterTes ng temperature: -15°CCycles:2IEC 60794-1-2-E7Cycles:10Turns: ±180°clamp:1mTension load: 20NIEC 60794-1-2-E10Min. loop diameter: 30 mm.IEC 60794-1-2-F1Temperature range: -40°C~+60°CCycles:2Dura on: 8 hoursIEC 60332-2-2IEC 61034-2IEC 60754-1 and 60754-2
According to IEC 60794 ,YD/T 1997-2009
- Total fiber strain less than 0.4% under rated tensile load.- No change in a enua on a er the test.- No damage to the cable elements.
- The maximum increase in a enua on less than 0.4dB.- No change in a enua on a er the test.- No damage to the cable elements.- The maximum increase in a enua on less than 0.4dB.- No damage to the cable elements.
- No fiber breakage.
- The maximum increase in a enua on less than 0.4dB.- No damage to the cable elements.
- Under visual examina on without magnifica on, no damage to the sheath, no fiber breakage during the test.
- The maximum increase in a enua on less than 0.4dB.- No damage to the cable elements.
- No kink occur.
- The maximum increase (1550nm) in a enua on shall be less than 0.4dB
- IEC 60332-2-2 Annex A- Minimum light transmi ance is 50%- pH ≥4.2
All Product Specifica on is protected by copyright. Specifica on subject to change without prior no ce.www.litech.cc
PRODUCT SPECIFICATION.........................................................................................................................
Fiber Optic
Product :
Op cal Fiber Cable - Drop Cable G657ADocument No. : 1.1.15.1_Vr3 Rev1.1
Page No : 5 of 5
4. Packing & Marking
4.1 Prin ng on op cal fiber cableUnless otherwise specified, white prin ngs are printed at intervals of 1m with the following informa on:• Metre marks• Type of cable and fiber count• Name of manufacture• Year of manufatured
Packing of op cal cable:• Standard length: 1 or 2km/reel
4.2 Wooden Reel Label & Marking
4.2.1 Content of label:• Type of cable, fiber count• Length• Gross weight KGS• Reel No• Year of manufacture
4.2.2 MarkingThe following are mark on the outside of reel flanges:• Arrow indica ng the direc on of winding
All Product Specifica on is protected by copyright. Specifica on subject to change without prior no ce.www.litech.cc
PRODUCT SPECIFICATION.........................................................................................................................
1.0 General
This specifica on covers the design and performance of the drop cables to be used in FTTH applica on.
1.1 Cable Descrip on2 Core LSZH Drop Cable with singlemode G657A fiber.
1.2 QualityLitech ensures a con nuing level of quality in our cable products through several programs including ISO 9001.
1.3 ReliabilityLitech ensures product reliability through rigorous qualifica on tes ng to assure the cable’s performance and durability in the field environment.
1.4 Reference
1.5 Working Condi on• Transporta on and storage temperature: -40°C~+60°C• Installa on temperature: -30°C~+60°C• Opera on temperature: -40°C~+60°C
1.6 Minimum Allowable Bending Radius• Sta c: 10mm• Dynamic: 20mm
1.7 Life TimeOp cal fiber cables supplied in compliance with the specifica ons can be capable of withstanding the typical service condi on for a period of twenty-five (25) years without detriment to the transmission or opera on and maintenance characteris cs of the cable.
ITU-T G.657IEC 60794-1-1IEC 60794-1-2IEC 60794-2IEC 60794-2-20IEC 60332-2-2IEC 61034-2
IEC 60754-1
Characteris cs of a bending loss insensi ve single mode op cal fiber and cable for the access networkOp cal fiber cables- part1-1-Generic specifica on-GeneralOp cal fiber cables- part1-2-Generic specifica on-Basic op cal cable test procedureOp cal fiber cables- part2- Indoor cables-Sec onal specifica onOp cal fiber cables- part2-20- Indoor cables-Family specifica on for mul -fiber op cal distribu on cablesIEC 60332-2_2 Tests on electric and op cal fibre cables Under Fire Condi onMeasurement of smoke density of cables burning under defined condi ons - Part 2: Test procedure and requirementsTest on gases evolved during combus on of materials from cables; part 1: determina on of the amount of halogen acid gas
Fiber Optic
Product :
Op cal Fiber Cable - Outdoor Drop Cable G657APage No : 1 of 5
IEC 60794-1-1 Op cal fiber cables- part1-1-Generic specifica on-General
IEC 60794-2 Op cal fiber cables- part2- Indoor cables-Sec onal specifica on
IEC 60332-2-2 IEC 60332-2_2 Tests on electric and op cal fibre cables Under Fire Condi on
IEC 60754-1 Test on gases evolved during combus on of materials from cables; part 1: determina on of the amount of halogen acid gas
All Product Specifica on is protected by copyright. Specifica on subject to change without prior no ce.www.litech.cc
PRODUCT SPECIFICATION.........................................................................................................................
Fiber Optic
2. Op cal Fiber In Cable (ITU-G657A1)
Cladding diameterCladding non-circularityCoa ng diameter
Fiber curl (Radius)Mode field diameter at 1310 nmCore concentricity errorA enua on at 1310 nmA enua on at 1380 nmA enua on at 1550 nmA enua on at 1625 nmDispersion in 1288 – 1339 nmDispersion in 1271 – 1360 nmDispersion at 1550 nmZero dispersion wavelengthZero dispersion slopeCable cut-off wavelengthPolariza on mode dispersion individual fiberPolariza on mode dispersion design link value(M=20, Q=0.01%)Proof stress levelMacro-bend loss(10 turns, 15mm radius)
125.0 ± 0.7 μm≤ 1.0 %245±10 μm(Before Colored)250 ± 15 μm (Colored)≥ 4 m8.6-9.5 ± 0.4 μm≤ 0.5 μm≤ 0.35 dB/km≤ 0.35 dB/km≤ 0.21 dB/km≤ 0.23 dB/km≤ 3.5 ps/(nm·km)≤ 5.3 ps/(nm·km)≤ 18 ps/(nm·km)1300 – 1324 nm≤ 0.092 ps/(nm2·km)≤ 1260 nm≤ 0.2 ps/�km≤ 0.1 ps/�km
≥100kpsi (0.69 GPa)≤ 0.03dB≤ 0.10 dB
≤ 0.40 dB/km≤ 0.40 dB/km≤ 0.30 dB/km≤ 0.32 dB/km
GeometricalCharacteris cs
Op calCharacteris cs
MechanicalSpecifica on
Category Descrip onSpecifica on
Before cable A er cable
Product :
Op cal Fiber Cable - Outdoor Drop Cable G657APage No : 2 of 5
All Product Specifica on is protected by copyright. Specifica on subject to change without prior no ce.www.litech.cc
PRODUCT SPECIFICATION.........................................................................................................................
Fiber Optic
Product :
Op cal Fiber Cable - Outdoor Drop Cable G657APage No : 3 of 5
Strength element
Outer sheath
Cable diameter(mm) Approx.Cable weight(kg/km) Approx.
MaterialDiameter(mm)CountMaterialColor
FRP0.5 ± 0.1
Steel Wire1.0
2LSZHBlack
5.2 (±0.2) * 2.0 (±0.2)21.5
A er cableA er cableA er cable
3.2.2 Dimensions and Descrip ons of Cable Construc ons
3.2.3 Mechanical Performance of Cable
3.2.4 Color Code of the Fiber
Each fiber can be iden fiable throughout the length of the cable in accordance with the following color sequence.
660 200 2200 300
Tensile performance(N) Crush(N/100mm)Short term Short termLong term Long term
No. 1 2
Color Blue Yellow
3.0 Op c Cable
3.1 General Design
Op cal fibers are posi oned in the centre. Two parallel strength elements are place at the two sides. Then, the cable is completed with a black LSZH sheath. FRP are applied as strength element. LSZH sheath is applied over the cable core.
3.2 Construc on
3.2.1 Cross Sec on of Cable
FRP
Op cal fiber
Messenger Wire
All Product Specifica on is protected by copyright. Specifica on subject to change without prior no ce.www.litech.cc
PRODUCT SPECIFICATION.........................................................................................................................
Fiber Optic
Product :
Op cal Fiber Cable - Outdoor Drop Cable G657APage No : 4 of 5
3.3 Mechanical, Electrical and Environmental Test Characteris csof the Fiber
Tensile performance
Crush
Impact
Bend
Repeated bending
Cable bending at low temperature
Cable torsion
Cable kink
Temperature cycling
Flame propaga onEmission of smokeEmission of corrosivegasesOtherparameters
Item Test Method RequirementsIEC 60794-1-2-E1Load: 600N or weight of 1 km cable,whichever is greater.Cable length under tension: Not less than 50m.Dura on of load sustain: 1min.Velocity of transfer device: either 100 mm/minDiameter of chuck drums and transfer devices:20 mes cable diameterIEC 60794-1-2-E3Load: 2200NDura on of load: 1minLength between test loca ons: 500 mmIEC 60794-1-2-E4Striking surface Radius: 12.5mmImpact energy: 1NNumber of impacts: at least 3, each separated at least 500 mmHeight:1mIEC 60794-1-2-E11AMandrel radius: ± 15 mes cable diameterTurns:10Cycles:6IEC 60794-1-2-E6Bending radius: 30 mes cable diameterCycles: 300Mass of weights: 4 kgIEC 60794-1-2-E11ABending radius: 10 mes cable diameterTes ng temperature: -15°CCycles:2IEC 60794-1-2-E7Cycles:10Turns: ±180°clamp:1mTension load: 20NIEC 60794-1-2-E10Min. loop diameter: 30 mm.IEC 60794-1-2-F1Temperature range: -40°C~+60°CCycles:2Dura on: 8 hoursIEC 60332-2-2IEC 61034-2IEC 60754-1 and 60754-2
According to IEC 60794 ,YD/T 1997-2009
- Total fiber strain less than 0.4% under rated tensile load.- No change in a enua on a er the test.- No damage to the cable elements.
- The maximum increase in a enua on less than 0.4dB.- No change in a enua on a er the test.- No damage to the cable elements.- The maximum increase in a enua on less than 0.4dB.- No damage to the cable elements.
- No fiber breakage.
- The maximum increase in a enua on less than 0.4dB.- No damage to the cable elements.
- Under visual examina on without magnifica on, no damage to the sheath, no fiber breakage during the test.
- The maximum increase in a enua on less than 0.4dB.- No damage to the cable elements.
- No kink occur.
- The maximum increase (1550nm) in a enua on shall be less than 0.4dB
- IEC 60332-2-2 Annex A- Minimum light transmi ance is 50%- pH ≥4.2
All Product Specifica on is protected by copyright. Specifica on subject to change without prior no ce.www.litech.cc
PRODUCT SPECIFICATION.........................................................................................................................
Fiber Optic
Product :
Op cal Fiber Cable - Outdoor Drop Cable G657APage No : 5 of 5
4. Packing & Marking
4.1 Prin ng on op cal fiber cableUnless otherwise specified, white prin ngs are printed at intervals of 1m with the following informa on:• Metre marks• Type of cable and fiber count• Name of manufacture• Year of manufatured
Packing of op cal cable:• Standard length: 1 or 2km/reel
4.2 Wooden Reel Label & Marking
4.2.1 Content of label:• Type of cable, fiber count• Length• Gross weight KGS• Reel No• Year of manufacture
4.2.2 MarkingThe following are mark on the outside of reel flanges:• Arrow indica ng the direc on of winding
FTTH Solutions -
Outdoor Subscriber Distribution Box
2 Port
FTTH Solutions -
Outdoor Subscriber Distribution Box
2 Port
•All Product Specification is protected by copyright. Specification subject to change without prior notice.•
Fiber
Optic
Da
taSheet
•1.7
.3.2
.8_R
ev1.0
1 of 1
Features
• Quick installation• Accommodate up to 2 pieces of SC, FC, LC or E2000 adapter.• Traditional swing frame design allow for access to the back section of the box• Can be used as splice box or FTTH drop cable fiber distribution.• Can be wall and pole mount.• Suitable for indoor and outdoor use.
Application
• FTTH deployment • CATV system application• Premise location
Part Number Description
Ordering Information
LTOC-FTH-OSDB-2 Outdoor Subscriber Distribution Box 2 port
Parameter Specification
Product Specification
DimensionMaterial Protection Rating
172mm (H) x 120mm (W) x 30mm(D)ABS + Polycarbonate (PC)IP 55
This mini OSDB can cater up to 2 core connections. It can be splice and patch whereby it has a traditional swing frame design provide access to adapters at the back section of the box.It is suitable for plug and play drop cable connections with field installable connector on the distribution side for easy connection. It contains cable strain relief for incoming cable and drop cable to avoid pull out.
FTTH Solutions -
Outdoor Subscriber Distribution Box
12 Port
FTTH Solutions -
Outdoor Subscriber Distribution Box
12 Port
•All Product Specification is protected by copyright. Specification subject to change without prior notice.•
Fiber
Optic
Da
taSheet
•1.7
.3.2
.9_R
ev1.0
1 of 1
This compact OSDB can cater up to 12 core connection. It can be splice and patch whereby it has a unique swing frame design provide access to splice part at the back of the swing. It is suitable to house pigtail and splice it to incoming cable before it patch to distribution side. It contains cable strain relief for incoming cable to avoid pull out. It has a compact cable slack management allow tighter slack with minimum bending radius to reduce the attenuation.
Parameter Specification
Product Specification
DimensionMaterial Protection Rating
240mm (H) x 204mm (W) x 175mm(D)ABS + Polycarbonate (PC)IP 55
Part Number Description
Ordering Informtion
LTOC-FTH-OSDB-12 Outdoor Subscriber DIistribution Box 12 Port
Application
• FTTH deployment • In- Building
Features
• Accommodate up to 12 pieces of SC, FC, LC or E2000 adapter.• Can be used as splice box or FTTH drop cable fiber distribution.• Can be wall and pole mount.• Suitable for indoor and outdoor use• Hinge opening 180°• Slam lock design for easy locking after finish installation• Made of polycarbonate (PC) and ABS with high mechanical strength
Fiber Management System -
SDB4 Subscriber Distribution Box
16 Port
Fiber Management System -
SDB4 Subscriber Distribution Box
16 Port
•All Product Specification is protected by copyright. Specification subject to change without prior notice.•
Fiber
Optic
Da
taSheet
•1.7
.3.2
.14_R
ev1.0
1 of 1
SDB4 Subscriber Distribution Box 16 Port is design for FTTH drop cable in FTTH environment. The box can house splitter or adapters for splicing, splitting and distribution applications. It is made of ABS plus PC material with high mechanical strength, corrosion resistance and weather proof for outdoor application. It also has features of slam lock design for easy locking during installation.
Features
• Made of ABS plus polycarbonate (PC) with high mechanical strength • Weather proof for outdoor application• Hinge opening up to 180°• Slam lock design• Sealed cable gland for unusual cable entry ports• Suitable for SC and LC duplex adapter• Wall and pole mountable, suitable for indoor and outdoor use
Parameter Specification
Product Specification
DimensionMaterial Protection Rating
280mm (L) x 220mm (W) x 85mm(H)ABS + Polycarbonate (PC)IP 55
Part Number Description
Ordering Informtion
LTOC-FTH-SDB4-16 Outdoor Subscriber Box SDB4 16 Port
SOHO BoxSOHO BoxSOHO Box
•All Product Specification is protected by copyright. Specification subject to change without prior notice.•
Fiber
Optic
Da
taSh
eet
•1.7
.3.1
4.3
_Rev
1.0
ONU 2 ONU 3
ONU 4 ONU 5 (OUTDOOR) ONU 6
ONU 7
ONU 1
1 of 1
Part Number Description Dimension
Ordering Information
LTOC-FTH-ONU-01-XLTOC-FTH-ONU-02-XLTOC-FTH-ONU-03-XLTOC-FTH-ONU-04-XLTOC-FTH-ONU-05-XLTOC-FTH-ONU-06-XLTOC-FTH-ONU-07-X
Soho Box ONU1Soho Box ONU2Soho Box ONU3Soho Box ONU4Soho Box ONU5 (Outdoor)Soho Box ONU6Soho Box ONU7
ONU1 - 280mm (H) x 330mm (W) x 120mm (D)ONU2 - 325mm (H) x 425mm (W) x 300mm (D)ONU3 - 340mm (H) x 310mm (W) x 120mm (D)ONU4 - 340mm (H) x 310mm (W) x 140mm (D)ONU5 - 252mm (H) x 252mm (W) x 130mm (D)ONU6 - 300mm (H) x 300mm (W) x 120mm (D)ONU7 - 400mm (H) x 300mm (W) x 120mm (D)
Litech SOHO Box/ONU Box/Multimedia Box is designed to house active equipments such as ONU and routes, as well as termination point for fiber, data cable and CATV Coaxial Cable.
Various designs and size are available to cater for different type of properties such as small apartment, high end condominium, bungalow or office unit.
Features
• Different design and size available• Surface mount or conceal type• Plastic or metal door• Outdoor or Indoor version
Option Accessories
• Mini power sockets• Cat 5e or Cat6 RJ45 jack• Fiber sockets• Telephone RJ11 jack• CATV Splitter• Fan with thermostat
FTTH Solutions - FTTH Solutions - Fiber Face Plate FP2FTTH Solutions - Fiber Face Plate FP2
•All Product Specification is protected by copyright. Specification subject to change without prior notice.•
Fiber
Optic
Da
taSh
eet
•1.7
.4.1
.2_R
ev1.
1
1 of 1
Features
• Terminate up to 2 fiber• Cater for different fiber adapter : SC, FC, LC,E-2000 & etc• Design with dust shutter to prevent dust from contiminating the fiber• Perfect for FTTH pre-terminate or field terminate cable• Comply to 50mm minimum bend radius requirement
Parameter Specification
Product Specification
DimensionMaterialProtective LevelOperating temperature
86mm x 86mmFire resistant UL-94-0 rated ABSIP44-20 °C to + 50 °C (5 to 95% RH)
Part Number Description
Ordering Information
LTOC-FTH-FP2-XX Fiber Face Plate FP2
•All Product Specification is protected by copyright. Specification subject to change without prior notice.•
NGTS Fiber Management RackNGTS Fiber Management RackNGTS Fiber Management Rack
•All Product Specification is protected by copyright. Specification subject to change without prior notice.•
Fiber
Optic
Da
taSh
eet
•1.3
.1.2
2.1
_Rev
1.3
1 of 1
NGTS Fiber Management Rack are designed to accommodate wide range of Litech fiber panels for termination and patching of high density fibers. NGTS fiber rack is equip with space for incoming cables as well as excess patch cables.
Features
Parameter Specification
Product Specification - Fiber Cabinet
DimensionFinishColour
2200mm x 300mm(D) x 900mm(W)High quality oven baked epoxy powderedBeige
DescriptionPart Number
Ordering Informtion
LTOC-NGTS-CAB-220309 NGTS Fiber Indoor Cabinet 2200mm x 300mm x 900mm
• Total Fiber Management Systems• Space for excess patch cables• High Density• Proper strain relief for incoming cables• Good appearance• Complied to ETSI specification
www.litech.cc www.apspower.cc
• Notable FTTH Project Reference List
Project Name
The Light Linear
Pearl Regency
The Vertiq
The Maritime
Sunway Montana
USJ Height
Mutiara Villa
M Condo
The Light Collections Phase 1
The Light Collections Phase 2
The Light Collections Phase 3
The Light Collections Phase 4
The Light Point
Trigon Apartment Setia Walk
Medini 218
IOI City Mall
Taman Sutera
Jaya One
Bestari Heights
Taman Wawasan D’Kiara Apartment
Taman Wawasan Saraka Apartment
Taman Wawasan Akasia Apartment
Taman Wawasan Kenaga Apartment
Mark Cheras Apartment
Istana Perlis
D’inspira Apartment
Garden Residences
Surian Condo
D' Pulze Shopping Mall
Marce Residences
Empayar Damansara
Flora Damansara
Kelana Sterling Condo
D' Pulze Service Apartment
Domain Cyberjaya
Primera Suite Cyberjaya
Locations
Penang
Penang
Penang
Penang
Selangor
Selangor
Cyberjaya
Johor
Penang
Penang
Penang
Penang
Penang
Selangor
Johor
Putrajaya
Johor
Selangor
Johor
Puchong, Selangor
Puchong, Selangor
Puchong, Selangor
Puchong, Selangor
Cheras
Perlis
Johor
Cyberjaya
Bandar Utama
Cyberjaya
KL
Damansara
Damansara
Kelana Jaya
Cyberjaya
Cyberjaya
Cyberjaya
www.litech.cc www.apspower.cc
• Notable FTTH Project Reference List
Project Name
Tierra Crest
Vista Komanwel
Sky Residence
Solaris Dutamas
Regalia Condo
Domain 2
Kelana Square
Windsar Tower
Casa Tropicana Condo
Sunway Vivaldi
Metropolitan Square
Vista Damai
Endah Promonade
Twin @ Damansara
Park Residence
Palmyra
Locations
Kelana Jaya
Bukit Jalil
Kuala Lumpur
Mont Kiara
Kuala Lumpur
Cyberjaya
Kelana Jaya
Sri Hartamas
Petaling Jaya
Sri Hartamas
Damansara Perdana
Kuala Lumpur
Kuala Lumpur
Damansara Height
Bangsar
Bangsar