PA
RT
CO
DE
: 1100083445
Bring Home InnovationBring Home Videocon
Fully Automatic Washing MachinePlease read this manual carefully beforeinstruction operating your machine. Retain it for future reference. Record model name & serial number of the machine. Please quote this information when you require service.
2nd Proof - 20-10-11Fully Automatic - VT55A11 - VT60A12
Shri. Nikhil Kulkarni - Chaitanya sirFrom Rajmudra
Positive - 22-10-11 supply
Message from the Vice Chairman & CEO
Page-1
spinning. The Fuzzy mode checks for the following before deciding on the
Wash Parameters :
Feature
=
=
=
=
=
=
=
=
=
=
Intelligence of Digital Sensi logic for superior wash quality
machine to make parametersindependent judgement regarding wash process on like water level washing, rinsing andrequirement, wash cycle time for soaking,
Self-Dry Load Sensing : The machine automatically selects the optimum waterlevel after sensing the cloth load.
Memory BackupIn case of a power failure ( while the machine is functioning ), the machine shall automatically complete the remaining part of the selected cycle after the power
resumes. This is due to the memory back up feature.
Auto BalancingThis mechanism works during spinning. In case of the clothes getting collected on a side of the tub, the fully automatic washing machines are provided a mechanism where in the machine shall stop the spinning operation & shall distribute the
Auto Error IndicationIf any of the following errors occur during the course of washing, your machine indicates it by the blinking of the LEDs on the control panel and audio indication
Dry tap Lid open while spinning Drain Block Imbalance while spinning
Unique AUTO SOAK optionSoaking is an important element of the washing process. It enhances and optimizes the detergent’s action on the clothes. This ensures that dirt & stain are easily removed and thus enhance the wash quality.
8 Wash Programmes NormalStrongSareeWoolNormal + SoakStrong + SoakSaree + SoakWool + Soak
=Child LockTo prevent stoppage of machine cycle by a naughty child, your machine has Child
key same time while cycle is in process. a long beep is heard as an acknowledgment of lock/unlock.
Lock facility. You can lock/unlock the control panel by pressing Program+Process
clothes uniformly in the tub. The spinning shall resume there after.
The closest you can get to a Human wash, Digital Sensi Control enables the
as follows :
Tap
Tape
LockLever
Water supplyhose cover
AB
Approx. 4mm
Adapter
Screws (4)
Water Tap
Accessories
Water supply hose
Drain hose
Tap adapter
Anti Rat Mesh Instruction Manual
Softenerinlet
Control Panel
Water Tap
Plastic Base
Tap Adaptor
Feed Valve
Tub
Lint Filter
Drain hose
Pulsator
Lid
Bleachinlet
Do not tie the power cord in a bundle during operation
Power cord
Parts Identification
Installation Page-4
Key press functions
Page-5Settings
During "Child Lock" mode no button can be operated. "Child Lock" can be activate after you start the cycle.
Ex. Dry
Ex. Dry is in Process Selection Key, one additional selection is available,the selection will be indicated by Blinking of Fuzzy LED. The machinewill 28 Min and go Off.spin for
VT60A12
WASH
RINSE
SPIN
SOAK
NORMAL
STRONG
SAREE
WOOL
DETERGENT FUZZY/ EX. DRY
52L / 56L
40L / 48L
28L / 36L
20L / 24L
POWER
STARTHOLD
CHILD LOCK
WATER PROGRAM PROCESS
2 43
1
56
VT55A11
WASH
RINSE
SPIN
SOAK
NORMAL
STRONG
SAREE
WOOL
DETERGENT FUZZY
47L / 52L
37L / 42L
27L / 32L
17L / 22L
POWER
STARTHOLD
CHILD LOCK
WATER PROGRAM PROCESS
2 43
1
56
Process
Press this button to choose process(wash, spin, rinse,ex dry).After pressing of this button, machinecome out from Fuzzymode.
4
Water LevelPress ths button to choose any water levelyou want, after press this button, machine comes out from Fuzzy mode and LED indicateactual water level in manual mode.
2
PowerPress this button, poweron. Press again, poweroff.It will power off automa-tically within 6~8 mins if no button was pressedafter power on, or afterthe program is finished.
1
ProgramPress this button to choose the program(normal, strong, saree, wool, + all program with soak)Press “start/pause” button afterpower on, it will work as per fuzzyprogram.
3
Start/Hold
Press this button afterpower on, it will work as per the defaulted program.Press it while working,it will stop, and again,continue.
5
Child Lock
Press ''program + process''at same time to activate child lock option.To remove the child lockoption again press "program+process"button at same time.
6
Due to continues R & D, the above graphics may change without any prior notice.
Fuzzy sensing is related to wash process. Machine will sense the cloth load.Depending on cloth load it will select the water level internally. During the Fuzzysensing, Fuzzy LED will wash in Fuzzy mode,glow . The Fuzzy LED means
HOW TO OPERATE MACHINE IN FUZZY MODE ?
1. Put laundry in the machine.2. Press power button to power on position.3.
Press START/PAUSE button. Machine will sense cloth load.4.
Put the detergent & close the lid.
5. Machine will start the operation.
Initially before switching ‘ON’ power if there is some water in the machine, thenmachine will directly go to manual mode with medium water level & defaultNORMAL Program, then program, or water level can be altered manually.
Press START/PAUSE switch to start operation after selecting it.
About Manual Mode
HOW TO OPERATE MACHINE IN MANUAL MODE
1. Press power switch to ‘ON’ the machine.
2. Select ‘PROGRAM’ depending on laundry type. If required soak can be selected.3. Select appropriate water level depending on laundry.4. Put laundry in the machine.5. Put the detergent.6. Press START/HOLD switch.
About Machine Operation
i) Machine will complete the processes in following sequence :
ii) When any Program is selected machine is set for standard cycle.iii) Soak can be selected with wash only. If wash is cancelled soak will be cancelled
iv) Soak selection will be automatically followed by wash. v) At the end of all selected process the buzzer will sound. & machine will shut off
Automatically (Auto off function).
SOAK RINSEWASH SPIN
Notes on Using Course
1. Normal Program : Used for normally soild clothes of daily use.2. Strong Program : Used for large sized laundries like curtains, bed sheets or jeans.3. Saree Program : Used for lightly soiled clothes like daily wear/under wear grament
or in saree.
4. Wool Program : Used for heavily decorated clothes, Embrodered clothes woolen.5. Normal+Soak Program : Recommended for heavily soiled clothes of daily use.6. Strong+Soak Program : Used for heavily soiled jeans or large sized laundries like
curtains, bedsheet etc.
7. Saree + Soak Program : Saree is generally used to wash Saree and Dhoties.Recommended for highly soiled decorated clothes or embroideredclothes etc.
Settings
it keeps glowing till end of wash.
automatically.
About Fuzzy Program
8. Wool + Soak Program :
Page-6 Page-7Operation of Full Program
SELECTIONPROGRAM
SOAK(OPTION)
WATER LEVELWASHTIME
RINSE SPIN
RINSE 1 RINSE 2 SPIN 1 SPIN 2**
Normal 23 min. 12 min.
2 min.SoakRinse
2 min.SoakRinse
30 Sec.
Strong 28 min. 15 min.
2 min.SoakRinse
2 min.SoakRinse
30 Sec.
Saree 18 min. 7 min.
2 min.SoakRinse
2 min.SoakRinse
30 Sec.
Wool 13 min. 3 min.
2 min.SoakRinse
30 Sec.
Water filling time depends on tap Water Pressure and selected water level.
Drain time depends on selected water level and number of rinse.
After wash program and water drain there is intermittent spin before rinse.After first rinse again there is a intermittent spin. Total time in normal(Soak+Wash+Rinse+Spin) cycle is approx. 51 minutes.
Ex. Dry 28 Minute*
52~56L40~48L28~36L20~24L
52~56L40~48L28~36L20~24L
52~56L40~48L
52~56L40~48L
x
x
VT60A12VT55A11
47~52L37~42L27~32L17~22L
47~52L37~42L27~32L17~22L
47~52L37~42L
47~52L37~42L
WHAT IS MEMORY BACK UP ?This facility is useful when there is a power failure while machine is in operation.
Due to memory back-up machine will complete the remaining part of the selected
cycle after power resumes.
HOW TO STOP CYCLE DURING OPERATION ?If due to some reasons you want to stop the operation midway before completion
of selected cycle then pause the operation by pressing START/HOLD switch &
then press power switch to ‘OFF’ the machine.
THIS IS NOT A PROBLEMAt power ‘ON’ if machine starts any process abruptly, this may be due to stored
memory of previous program which has been stopped intermediately. In this case
to start the machine from beginning proceed as following :
1. Press power to switch ‘OFF’ the machine. This will clear the memory.
2. Again press switch ‘ON’. The machine will start from beginning.
Memory Back-Up
** 4 min SPIN 2 is applicable in Model VT55A11.
7 Min6 Min5 Min4 Min
7 Min6 Min5 Min4 Min
7 Min6 Min
7 Min6 Min
* Ex. Dry of 28 Minute is applicable in Model VT60A12.
SOFTENER DISPENSERDo not pour detergent, bleach, starch etc, in the softener dispenser, otherwise themachine will operate incorrectly. If you have poured them in the dispenser by mistake,empty the dispenser by holding it up-side down.
CAUTION ON THE USE OF SOFTENER1. Do not open lid during spinning operation when softener has been put in the
softener dispenser. The softener would be dispensed incorrectly and be ineffective.
2. Do not leave the machine for an extended time with softener in the dispenser. Thesoftener could harden, causing misoperation.
3. Pour softener in the dispenser slowly so that it may not spill out.
STANDARD AMOUNT OF SOFTENER
VT60A12
Softener (Approx)
20/24L
18 ml.
28/36L
22 ml.
40/48L
24 ml.
The amount of softener varies depending upon the type of softener. Pleaserefer to the instructions attached to the Pack/bottle of softener.
52/56L
27 ml.
NOTE
1. Be sure to pour specified amount of softener in dispenser before starting wash.(Set the softener prior to washing operation.)
2. Softener will be poured into the tub automatically just before the final rinsing.(When operation starts, softener will be moved from dispenser to balancer.)
How to use Softener
VT55A11 17/22L 27/32L 37/42L 47/52L
Softener Inlet
If it is difficult to put in.
Remove the softenerdrawer by pulling ittowards you.
Page-8 Page-9General InformationReference chart approx. Weight of garments used daily. A family of two children and their parents.
Wt. of other commonly used clothes
1) Dhotee 215 gms. 2) Woollen Sweater 300 gms. 3) Shawl 375 gms.
4) Pillow Cover 100 gms. 5) Bed sheet 500 gms. 6) Lungi 150 gms.
Put in the detergent and laundry
When using powdered synthetic detergentsPut it in the Detergent Drawer.
[ Please note]If drawer becomes wet detergent will clingto it, so please wipe it off with a dry cloth.Please don’t put in powdered soap. It is difficult todissolve and will harden.
When using liquid detergentDilute with twice the amountof water and pour in.
Liquiddetergentand bleachinlet(ON TUB)
Wate
r
DETERGENT AMOUNT
Detergent
Laundry
Dete
rgent
(Concen-
(Norm
al)
25g. type/
30 L water
40g. type/
30 L water
Aprox.58g.
Detergent
47/52L
Po
wd
ere
dS
oa
p-
Po
wd
er
Liq
uid
Ble
ach
Detergent
37/42L
-
Detergent
27/32L
-
Detergent
17/22L
-
58g. 58g. 50g. 50g. 50g. 44g.44g. 44g. 36g. 36g. 36g.Aprox. Aprox. Aprox. Aprox. Aprox. Aprox. Aprox. Aprox. Aprox. Aprox. Aprox.
Aprox.37g.
Aprox.37g.
Aprox.31g.
Aprox.31g.
Aprox.28g.
Aprox.28g.
Aprox.23g.
Aprox.23g.
Po
wd
ere
dS
oa
p
Po
wd
er
Liq
uid
Ble
ach
Po
wd
ere
dS
oa
p
Po
wd
er
Liq
uid
Ble
ach
Po
wd
ere
dS
oa
p
Po
wd
er
Liq
uid
Ble
ach
Liquid Detergent : Dilute with twice the amount of water and pour in.
Liquid Bleach Before beginning the wash, dilute bleach with a good amount of water and pour in. :
Powdered Bleach Put it directly in the washing tub before beginning the wash. :
Please Note Please read and follow closely the directions and warnings for the bleach. : Please do not put liquid bleach into the washing tub directly.
Warning Liquid soap, like powdered soap is not easily dissolved and can leave : scum along inside of the washing tub so be sure to rinse thoroughly.
-ntr
ate
d)
Level
52/56L 40/48L 28/36L 20/24L
VT55A11
VT60A12
Fault Diagnosis Chart
BEFORE CALLING VIDEOCON SERVICE CENTRE - CHECK THESE POINTS
There may be certain conditions when machine may not function properly & it may give theError Signal so check these point against the symptoms.
SYMPTOMS CHECK POINTS
1. Doesn’t run at all. Check if there is power failure.
Check if the power fuse has blown.
Check if the power plug is plugged in thoroughly.
Check if the power switch has been pressed.
Check if the tub has been filled with the prescribed
quantity of water
(Has the water tap been turned on).
Check if the START/HOLD switch has been pressed.
2. If there is no water supply Check if you have forgotten to connect the water
hose & to turn on the tap.
Check if the water supply & water hose are frozen.
Check if the water supply has been cut-off.
Check if the connection of water supply hose is cloggedwith dirt.
3. When power switch is
pressed ‘ON’ machine starts
any operation abruptly
This may be due to stored Memory of previous program.Please refer to memory back-up on page 8.
NOTE :
“This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.”
Specification* Page-10 Page-11Usual Faults and Resolving Methods
1. Water is notsupplied afterpressing START/HOLD switch.
Above set of LEDs starts blinking withbuzzer for 10 seconds. After 10 secondsbuzzer stops but LEDs blink continuouslytill machine lid is once opened & closedonce or till water level in tub reaches theset level. As soon as water level is reached
or lid is open & closed, machine restartswith its normal operation.
PROGRAM PROCESS
Have connected
water supply hose &did you open watertap ?
Water supply may notbe there.
Water supply hose portfilter may be cloggedwith dust. (Refer toCleaning of watersupply Hose port onpage 16)
Did you press START/HOLD switch ?
Ensure proper watersupply.
NORMAL WASH
RINSE
ERROR SIGNAL CHECK POINT
SPIN
Lid may be open.Close the lid, then onlymachine will resumethe rest of cycle.
2. Rinse/Spin does
not start though
water is draind
STRONG WASH
RINSE
SPIN
Above set of LEDs starts blinking withbuzzer for 10 seconds. After 10 secondsbuzzer stops but LEDs blink continueblinking till the lid is closed. As soon aslid is closed machine restarts with itsnormal operation.
PROGRAM PROCESS
3. Water is notdrained after
opening ofdrain valve
Above set of LEDs starts blinking withbuzzer for 10 seconds, the drain valve isclosed. After 10 seconds buzzer stops butLEDs continue blinking till machine lid isonce open & closed once. As soon as lidis closed machine restarts with its normaloperation.
Drain hose may be
abnormal is it lowered ?Water may be frozen init & It may be clogged.
It may be kinked.Part of drain hose may
be positioned 165 mm or
more higher than floorlevel.Extension hose may belonger than 3 m.
Hose bore may be toosmall.
* Ensure proper drain system.
WOOL WASH
RINSE
SPIN
Clothes in the tub may
be gathered on oneside.
Machine may be
4. Midway during
spinning, theoperationsuddenly
SAREE WASH
RINSE
PROGRAM PROCESS
wobbling or the floorchanges toSPIN may be inclined.
When laundry is
unbalanced during
spin drying automatic
balancing is done by
machine for 2 times by
rinsing & again 3rd
time if imblanceoccurs machine givesthe error signal then
rinsing.
Above set of LEDs starts blinking withbuzzer for 10 seconds. After 10 secondsbuzzer stops but LEDs continue blinkingmachine will resume the operation, open
PROGRAM PROCESS
the lid & clothes are evenly distributed then
distribute clothes
lid is closed.
evenly in the tub.
ERROR SIGNAL CHECK POINT
Page-12Usual Faults and Resolving Methods Page-13Safety Precaution
Do not use the Washing Machine to wash items otherthan Clothes, Blankets, Curtains, Towels and thingsalike.
Never disassemble, repair or remodel thiswashing machine.
This can cause fire or
irregular action thatresults in injury.
Consult your dealer for repair.
Do not damage the power cord and power plug.
(Do not damage, modify, excessively bend, twist, pull,or bundle the power cord, do not put the power cordand plug close to a heating appliance, do not put any-thing heavy on power cord and plug.) If the powercord cord and plug is damaged, there is a risk ofelectric shock, short circuit or fire.
Consult with your dealer about repair of the cord and plug.
Never touch laundry with your handduring the spin cycle untill the tub hascompletely stopped spinning.If you touch the laundry, even if the tubis rotating slowly, there is a danger ofinjury if your hand becomes entangledwith the laundry. Pay particular attentionto protecting children from such injury.
Do not install the washing machinein a humid place such as a bathroomor in a place exposed to the weather.
There is a risk of electric shock, fire,breakdowns, or deformation.
When you are cleaning yourwashing machine, do notapply water directly to any partof the washing machine.
It will cause short circuit andelectric shock.
Children may fall into the tub andget drowned. Do not leave thewashing machine with lid openand water remaining inside.
Do not allow your child peer over thewash tub. Do not place a stool or simi-lar objects near washing machine.
Do not place flammablesubstances near the machinesuch as kerosene, benzine,paint thinner and alcohol. Donot put clothing with suchsubstances in the tub.
There is a risk of explosion or fire.
Remove any dust which may accumulate aroundthe electric cord.When dust has accumulated on and around the plug,and the dust gets damp or wet, its insulation becomesdefective and may cause a fire.Pull out the plug, and wipe off dampness with a dryclean cloth.
If you are not going to use the washing machine for a long period of time, pull the power plug out of the socket.
Do not put your hand or footunder the washing machinewhile the machine isoperating.There is a rotating mechanismunder the machine, so youcould be injured.
Always pull the power plug outof the socket before doing anycleaning or maintenance ofthe washing machine.Otherwise, you may sufferelectric shock or injury.
Do not use a plug socket and wiring equipmentfor more than their capacity.If you use socket or wiring for more than its ratedcapacity by connecting multiple appliances, it cancause fire due to overtheating.
Make sure to push the plugcompletely into the socket.If the plug is not completely pushed intothe socket, this will cause electric shockand fire due to overheating.
Never use a damaged power plug or cord
Do not pull out or push in the powerplug with a wet hand.
It will cause electric shock.
Page-14
Do not place any burningobject including burning candlesor cigarettes, near the washingmachine.
There is a danger of fire ordeformation.
Do not use water hotter than500C for wash water.
The plastic parts will becomedeformed resulting in electricshock or electricity leakage.
Do not climb up or put anytingheavy on the top of themachine.
You could be injured due todeformation or breakage of thewashing machine.
Always check the hose connection by turning on thewater tap before washing.
If the fixing screws are loose, it causes water leakagethat could cause unespected damage.
Never disconnect by pulling thecord. Hold its plug when you pullit out.
There is danger of an electricshock or short circuit which maycause a fire.
Do not wash and spin waterproof sheetsand garments
(Example) Raincoats, outfits (coats/jackets) and pants for fishing andskiing, etc.The items could be damaged or youcould be injured due to irregularvibration during the spin cycle.
Install the washing machine on a sturdy floor of whichmaximum permissible inclination is two degrees.
If the machine is installed on carpet, make sure that the carpet does not block any openings.
Fully Automatic Washing Machine should notbe installed on TROLLY.
Insure three core power plug seat must have
ground connection.
Safety Precaution
Large and bulky
clothingIf you gently press
down on the clothing
while the tub is fillingsuch that it completely
absorbs the water, the
laundry willbe balanced.
When there is lint or
balls of woolTurn it inside out.
Clothing which has long
cords or clasps attachedTie the cords on
aprons,pillow covers and
the like and fasten clasps.
Clothing which is too delicate
to wash even in the delicateand hand wash cycles.
Put clothing with lace attached,
lingerie, nylon stockings,chemical fibre transparent
fabrics etc.
in a store-boughtwashing net.
Tips for not damaging clothing
1. Put in soap and laundry and
run WASH and DRAIN cycles.
3. Take out the laundry when drainingrinse water use spin-dry only.
2. Stop the WASH cycle before the finalspin dry leaving the laundry as is inthe water. (Stop drainage)
Preventing Wrinkles
Page-15
1. Remove it.
Pull off the filter frame.
Cleaning out lint filter Maintaining themachine
2. Clean out the lint. Turn
the filter Inside out and
wash it out in water.
3. Put it back on. Return
the filter to its original state
and holding the filter frame,
reinsert it securely.
Wipe it regularly with a
soft cloth.
When it is unusually
dirty, wipe it with a
cloth which has been
soaked in a neutral
soap or soapy water.
Please do not put water on
it directly or wipe it with
thinner, cleanser, kerosene,
benzine, alcohol etc.
If you use a chemical
swab, please follow the
directions closely.
Cleaning the watersupply hose and fitting
Detach the water
supply hose periodically
and clean out filter
residue with a brush.
If you simply detach the
water supply hose water will
splash out, so follow this
procedure before detaching it.
1. Close the water tap.
2. Press ON the power
swtich
3. Push the START/HOLD
switch
4. Press OFF power
switch after few seconds
5. Loosen and remove the
water supply hose nut.
Do not use machine
with damaged/without
Lint Filter
Maintenance
Page-16Not to Forget
Don’t get water on the control panel
There is risk of electric
shock or breakdown.
Don’t put in too much detergent !
If too much detergent is used, soap
suds will be difficult to get
rid of and rinsing will be
insufficient.
When articles are used as a cover
Refrain from using chlorine
vinyl covers. They will scar
the Iacquer and resin
surfaces.
If you use a vinyl
chloride cover, place
a cloth on th machine
before putting the
cover on.
After finishing don’t forget.....
Please shut off the tap. If you are not going to
use the machine for a long period of time,
please remove the plug.
Please don’t let water
sit for a long time.
Handling and inspection of the electric
cord and plug
When pulling out the cord
and plug, hold from the
plug and pull.
Please be sure to close the lid
If the lid isn’t closed, the spin function won’t
occur and will be displayed.
Don’t put too much laundry in !
Please fold bulky clothing and put it in such a
way that it won’t stick out.
Don’t wash water-repellent
clothing and sheets.
Condensation
When the air temperature
is high but the water temperature
is low, condensation will build
up on the outside of the
washing tub and the floor
will become wet.
Page-17Warranty terms and conditions
FILL AND DESPATCH WARRANTY CARD ELSE THE WARRANTY VOIDS
1. This warranty is confined to the original products of the only.manufacturer
2. The or their authorised service manufacturer Agent / will repair / replace all parts failing dueto faulty material or defective workmanship pertaining to the above Washing Machine.
3. Only the or its authorised Service manufacturer Agent / can service/repair/attend to install/reinstall the washing Machine. The list of ’s serivce centre is as printed overleaf.Manufacturer
4. If the machine is not repairable at the place of its installation then the decision oftechnician to call back the machine to Service Centre for repairs shall be final. In suchcases it is the responsibility of Purchaser to bring the machine to the Service Centre.
5. For the units installed beyond the municipal limits of the jurisdiction of the authorisedservice a ’Manufacturer Manufacturers authorized service station or ’s dealers as well asexpenses incurred in connection with deputing of service personnel/technicians towardsto and fro travel conveyance with deputing of service incidentials etc. will be borne bythe customer.
6. Any change of location of the unit and / or change of ownership has to be done inconsultation with the or its authorised service agent so that the warrantyManufacturerobligation for the remaining part of the warranty could be transferred to the new ownersor the original purchaser but at the new location. The unit so transferred will be inspectedby the or its service agent at the cost inspection charges.Manufacturer
7. Any damage caused during shifting will be repaired on chargeable basis. In the event ofrepair / replacement of any part/s of the set, this warranty will thereafter, continue andremain in force only for the unexpired period as per the warranty card issued at the timeof purchase of the set. Moreover, the time taken for repair and in transit, whether underthe warranty or otherwise, shall not be excluded from the warranty period.
8. This warranty will continue to be in force for the term herein specified, irrespective ofwhat replaced may be provided under it, and such replacement shall not attract anyfresh warranty unless specified.
9. The warranty extended herein is in lieu of all implied conditions and warranties under thelaw and is confined to the repair or replacement of defective parts and does not coverany consequential or resulting liability, damage or loss arising from such defects.Furthermore, the warranty in no case, shall extend to the payment or any monetaryconsideration whatsoever of the replacement or return of the Washing Machine as awhole.
10. The defective spare part/s shall be the sole property of and will be collectedmanufacturerby the Authorised Service Centre / Franchisee.
11. It shall be the discretion of the to replace the required part with suitable andmanufacturercurrently available part/s. The may also use the substitute part for defective part.manufacturer
Manufacturer of this VIDEOCON Brand Washing Machine undertake that the product is warrantedagainst manufacturing defects for a period of date of purchase,24 months, commencing from the the manufacturer will repair or replace free parts of the Washing Machineof charge any part or
sole discretion, that the defect/s material or workmanship only.is/are due to faulty The warranty will be governed by the following clauses :
except Top Lids, Inlet/Drain Hose and the company be fully satisfied, in itslint Filter, should
Page-18Warranty terms and conditions
15km. STONE, AURANGABAD-PAITHAN ROAD,VILLAGE CHITEGAON, TALUKA PAITHAN,AURANGABAD - 431 105,MAHARASHTRA, INDIA.PHONE No. - 02431 - 329271,329783
TEKCARE INDIA PRIVATE LIMITED.,For any doubts or clarifications please contact us on-
12. The warranty does not cover any accessories external to the system or supplied by dealer .
13. The ’s obligation under this warranty shall be limited to repairing or providingmanufacturerreplacement of parts, which are found to be defective within warranty period.
14. Any defects in electrical installation on fittings outside Washing Machine shall have tobe rectified by the purchaser only.
15. The shall not be liable for any delay in rectifying the machine, in the event ofmanufacturernon-availability of components and shall in no way be responsible for any losses, director indirect, arising out of the delay, if any.
16. If the machine is inspected by the authorized service center during warranty periodand product is found free from any sort of damage/defect, Applicable visiting charges
17. Warranty shall stand ceased / cancelled if the machine is used for any type ofcommercial purpose.
18. The is not responsible for any breakage or non - performance or delay inmanufacturerproviding service due to strike, industrial/labour dispute, fire, accident, damage,
restriction imposed by Government, Act of God, riot, war, etc. which are beyond thecontrol of the .manufacturer
19. The warranty is issued subject to the jurisdiction of Aurangabad Court of law.
THIS WARRANTY IS NOT APPLICABLE IN ANY OF THE FOLLOWING CASES
1. The warranty card is not duly filled and mailed back to the service centre forregistration by the purchaser, within 10 days of purchase.
2. The completed Warranty card is not presented to the technician at the time of repair.manufacturer3. The machine is not used according to the instruction given in owner’s guide.4. Defects caused by improper use as determined by the personnel.manufacturer5. Any repair work/installation is carried out by the person other than Videocon service
centre/service agent.6. Site (premises where the product is kept) conditions that do not conform to the
recommended operating conditions of the machine.7. The serial number is deleted, defaced or altered.8. If the electrical power supply voltages, are not within the stipulated norms.9. Any defects arising out of lightning, abnormal voltage, fire, accident, any acts of God
or other circumstances beyond the control of the while the machine is in transitmanufactureror otherwise.
10. Defects caused by household pets, Rats, Cockroaches or any other animals or insects.
will be payable by customer.
20. If any colored internal or external components are replaced there will be commitment to ensure that shades match with the original or other components. The replaced shades, patterns, tints may vary from the customer's unit due to continuous usage of unit. Any matching components changed at customer's request will be on chargeable basis except the component which are actually needed.
E MAIL : [email protected] Web : www.servicedelight.com
CSO AURANGABAD COPY
Note : The after sale service shall be subject to the production of this card at the time of each servicing, either at
the place of the customer or at any service center. In absence of this card, the company shall not be liable
to provide after sale service as per the warranty norms.
This card stands null and void if the Service Center copy of Warranty Card is not dispatched within 10
days of date of purchase (DOP) and duly signed by Authorized Dealer on date of purchase.
Dealer sign & seal Customer sign
Customer Name :
Customer Address :
Tel No. :
Dealer Name :
Dealer Address :
Tel No. :
Model No. :
DOP :
I accept the terms and conditions of warranty.
Dealer Bill Date :
Bill No. :
Set Serial No. :
Service Registration at -
SERVICE CENTER COPY
Dealer sign & seal
Customer sign
Customer Name :
Customer Address :
Tel No. :
Dealer Name :
Dealer Address :
Tel No. :
Model No. :
DOP :
I accept the terms and conditions of warranty.
Dealer Bill Date :
Bill No. :
Set Serial No. :
Service Registration at -
CUSTOMER COPY
Dealer sign & seal Customer sign
Customer Name :
Customer Address :
Tel No. :
Dealer Name :
Dealer Address :
Tel No. :
Model No. :
DOP :
I accept the terms and conditions of warranty.
Dealer Bill Date :
Bill No. :
Set Serial No. :
Service Registration at -
CUT HERE
CUT HERE