-
Holy Family Outdoor Display Patterna gift from Jona Giammalva
Uses a 4x4 piece of plywood. After you have the pattern taped together you can divide the 3 parts at the bottom so you can move them around on your plywood to get
the best use of space.
-
EXTRA 4” ADDED TO HEIGHT
BEFORE YOU START!We opted to add 4” at the bottom of our designs (after we cut the paper pattern pieces out) because we realized the 2x4 was going to hide some of the bottom
details (see picture on cover page). You may want to try this.
This guide shows the order the papers will go together. Just tape everything at the edges with no overlapping and then cut the
shapes out
-
1 1 1
2 2 2 2
3 3
1
3 3 3
444444
Cut where the arrows point to divide your pieces after you tape and cut them.
-
1
Make sure your printer is scaled at 100%
-
11
-
1
-
1
-
2
-
2 2
-
2
-
2
-
3
-
3
-
3
-
3
-
3
-
4
-
4
-
4
-
4
-
4
-
4