Download - Hydraulic Pumps Section Overview
® 61
�
��
�
�
�
�
�
��
�
�
�
��
�
�
P
PP
MP
P
P/11
PU
PE
ZU
ZE
PE
PA
PAPAM
ZA
PGM
EGM
62
6466
68
69
70
72
74
7880
86
92
94
9697
98
100
102 �
www.enerpac.com
Hydraulic Pumps Section Overview
Lightweight Hand PumpsExclusively from Enerpac
Steel Hand PumpsLow Pressure Hand Pumps
Multifluid Hand PumpsPumping fluids up to 1000 bar
Foot PumpFor handsfree operation
Ultra-High Pressure Hand PumpsPressure up to 40,000 psi
Economy SeriesCompact and Portable
Submerged SeriesPowerful and Low-Noise
Z-Class Pumps ZU4-SeriesPortable Pumps
Z-Class Pumps ZE3 to ZE6-SeriesThe Industrial Standard
8000-SeriesThe Maximum Flow Pump
Turbo II Air Hydraulic PumpsThe New Air Pump Standard
Air Hydraulic PumpsSingle and Twin-Air Motor
ZA4 Air Hydraulic PumpsThe Standard for Air-Hydraulic Pumps
Atlas SeriesYour Gasoline Pump Solution
8000 SeriesFor the Largest Jobs
Man
ual
Ele
ctri
cA
irPower Source
MaximumReservoirCapacity
Pump Types SeriesMax. Flowat RatedPressure
(in3/min)
PageG
aso
line
155 in3
453 in3
200 in3
60 in3
1 gal.
1.5 gal.
25 gal.
305 in3
2 gal.
10 gal.
10 gal.
25 gal.
.15
1.33
.15
.291.55
.15
38 in3
38 in3
10 gal.
10 gal.
(in3/stroke)
(in3/stroke)
(in3/stroke)
(in3/stroke)
(in3/stroke)
20
20
60
200
462
10
9
80
100
346
�
72 www.enerpac.com
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. For use with
the Economy pump the G-2535L gaugeand GA-3 gauge adaptor are suggested.
For a full range of gauges, please refer tothe System Components section.
¤PU-Series, Economy Electric Pumps
• Lightweight and compact design, 22 to 41 lbs• Large easy-carry handle for maximum portability• Two-speed operation reduces cycle times for
improved productivity • 115 VAC 50/60-cycle universal motor will operate on
voltages as low as 60 volts • 24 vdc remote motor control, 10-ft length for
operator safety• Starts under full load• High strength molded shroud with integral handle,
protects motor from contamination and damage• Designed for intermittent duty cycle
Shown: PUJ-1200B
Single-acting
Double-acting
Usable OilCapacity
(gal)
Used with Cylinder
Pressure Rating
(psi)
ModelNumber*
� An Economy pump PUJ-1200B is used with an RC-2514 to reposition a stamping die to simplify maintenance.
1st stage 2nd stage
Page: 115
* For 230 volt applications replace “B” suffix with “E”.** Electric dump valve for auto-retract of cylinders.
Speed Chart
To determine how the 0.5 hpEconomy pump will operate your
cylinder, see the Pump/Cylinder SpeedChart in the “Yellow Pages”.
Page: 113
Heavy onPerformance, Light on Weight
.501.00.501.00.501.00.501.00
200200200200200200200200
10,00010,00010,00010,00010,00010,00010,00010,000
PUD-1100BPUD-1101BPUD-1300BPUD-1301BPUJ-1200BPUJ-1201BPUJ-1400BPUJ-1401B
®
D
C
FA
1/4"-18NPTF
E
J
3/8"-18NPTF
3/8"-18NPTF
B
H
73www.enerpac.com
Economy Electric Pumps
ValveType
OutputFlow Rate
(in3/min)
Weight
(lbs)
CurrentDraw
(Amps)
ModelNumber*
HFEDCBA J
SoundLevel
(dBA)
MotorVoltage
(VAC)1st stage 2nd stage
PU Series
Reservoir Capacity:
0.5-1.0 gal.Flow at Rated Pressure:
20 in3/min.Motor Size:
.5 hpMaximum Operating Pressure:
10,000 psi
Gauge Port (PUJ-1200/1201 only)
Outlet Port
Tank port
Dimensions (in)
About the Economy Pump
The Economy pump is bestsuited to power small to
medium size cylinders or hydraulic tools.Its lightweight and compact designmakes it ideal for applications whichrequire easy transport of the pump. The Universal motor works well on longextension cords or generator-drivenelectrical power supplies.
For further application assistance refer tothe “Yellow Pages”.
PUD-1100 Series• Provides advance/auto-retract of
single-acting cylinders• Ideal for punching applications
• For applications not requiring load holding
• 10-ft pendant controls motor andvalve operation
PUD-1300 Series• Provides advance/hold/retract of
single-acting cylinders• 10-foot pendant controls motor and
valve operation• Ideal for applications requiring remote
valve operation.
PUJ-Series• Available with 3- and 4-way valves for
single- or double-acting cylinders• 10-ft pendant controls the
motor operation• Manual valves provide
advance/hold/retract tool control
Flow Chart
Pressure (psi) �
Page: 104
Economy PU Series
Oil
Flo
w(in
3 /m
in)
�
Dump **
Dump and Hold
3-way, 2-pos.4-way,3-pos.
* 230V pumps (with “E” suffix).
115115115 115115115115115
14.2514.7214.2514.7214.2514.7214.2514.72
9.6212.189.62
12.189.62
12.189.62
12.18
9.6214.509.62
14.509.62
14.509.62
14.50
858585 8585858585
9.59.59.59.59.59.59.59.5
2020202020202020
200200200200200200200200
4.004.154.004.154.004.154.004.15
4.725.124.725.124.725.124.725.12
8.0012.748.00
12.748.00
12.748.00
12.74
.40
.40
.40
.40
.40
.40
.40
.40
5.255.625.255.625.255.625.255.62
2638263822342941
PUD-1100BPUD-1101BPUD-1300BPUD-1301BPUJ-1200BPUJ-1201BPUJ-1400BPUJ-1401B
74
PE-Series, Submerged Electric Pumps
• Two-speed operation reduces cycle times for improved productivity
• Powerful .5 hp induction motor is submerged in the oilreservoir to run cooler, protect the motor, simplify thepump interface, save space and reduce noise
• Large 1.5 gallon reservoir allows operation of a wide range of cylinders
• 24 VDC remote pendant control on certain models for safer operation
• Externally adjustable relief valve allows control ofoperating pressure without opening the pump
• 40-micron internal return line filter keeps oil clean, promoting longer pump life
• Full length side tube for easy monitoring of oil level
Shown: PEJ-1401B
� The Remote Jog Model of theSubmerged Pump simplifiesrepair on this construction crane.
Best Performancefor Mid-RangeCylinders and Tools
5 BASIC PUMP TYPES
Select the model that suits yourapplication. For special requirements seepage 77 or contact your Enerpac office.
� SELECTION CHARTFor more technical information see next page.
* Contact Enerpac for details on VM style valves.
PED-Series: with Dump Valve
• Ideal for punching, crimping and cutting•For use when load holding is not
required•Control pendant with 10 ft. cord controls
valve and motor
PEM-Series: with Manual Valve
• Ideal choice for most applications•Manual valve control, for both single-
acting and double-acting applications•Manual motor control
PER-Series: with Solenoid Valve
• Ideal for production and lifting•All valves are 3-position for
Advance/Hold/Retract•Control pendant with 10 ft. cord
for remote valve operation
PEJ-Series: with Remote Jog• For light production and lifting
applications• Manual valve control for single-acting
or double-acting cylinders• Control pendant with 10 ft. cord
for remote motor operation
PES-Series: with Pressure Switch
•Designed for maintaining pressureapplications, such as clamping,workholding and testing
•All versions include manual valves fordirectional control
�
www.enerpac.com
¤
® 75
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
55
53
53
53
65
65
55
55
55
62
62
Submerged Electric Pumps
Model Number
115 VAC, 1 ph
Used with Cylinder
Valve Type* Usable OilCapacity
(gal)
Weight
(lbs)
PE Series
Reservoir Capacity:
1.5 gal.Flow at Rated Pressure:
20 in3/min.Motor Size:
.5 hp
Submerged PumpApplication
The Submerged pump is best suited to power small tomedium size cylinders or hydraulictools, or whenever a quiet, inter-mittent duty cycle is needed. With its low sound level and theaddition of the optional oil cooler,the Submerged pump is suited tolight production work as well.
Its lightweight and compact designalso make it ideal for applicationswhich require some transport of the pump.
For further application assistancesee the “Yellow Pages” or contactyour local Enerpac office.
Page: 104
Maximum Operating Pressure:
10,000 psi
PED-1001B
PEM-1201BPEM-1301BPEM-1401B
PER-1301BPER-1401B
PEJ-1201BPEJ-1301BPEJ-1401B
PES-1201BPES-1401B
Single-acting
Single-acting Single-acting Double-acting
Single-acting Double-acting
Single-acting Single-acting Double-acting
Single-actingDouble-acting
Dump
Manual VMP 10000DManual VMF 10000D Manual VMC 10000D
Solenoid (VEF-15500D)Solenoid (VEC-15600D)
Manual VMP 10000DManual VMF 10000D Manual VMC 10000D
Manual VMP 10000D Manual VMC 10000D
Advance/Retract
Advance/RetractAdvance/Hold/RetractAdvance/Hold/Retract
Advance/Hold/RetractAdvance/Hold/Retract
Advance/RetractAdvance/Hold/RetractAdvance/Hold/Retract
Advance/RetractAdvance/Hold/Retract
Pump Type Valve Function
www.enerpac.com
76 www.enerpac.com
3/8"-18NPTF
5
10,000 150 0.5 62-701,000-10,000
1,000 20
PE-Series, Submerged Electric Pumps
MotorSize
(hp)
PressureRating
(psi)
Motor ElectricalSpecifications*
(Amps @ Volts-Ph-Hz)
OutputFlow Rate**
(in3/min)
Relief ValveAdjustment
Range
(psi)
SoundLevel
(dBA)
* At bypass and maximum pressure. See matrix footnotes on next page for Hz limitations.** All flow data at 60 Hz, 50 Hz data will be 5/6 th this number.
1st stage 1st stage2nd stage 2nd stage
Speed Chart
To determine how a submergedpump will operate your cylinder,
see the Pump/Cylinder Speed Chart in the “Yellow Pages”.
Page: 113
Submerged Pump Performance
� This PED-1001B Submergedpump quickly and quietly powers a hydraulic nut cutter in thisbucket maintenance application.
� For full features see page 74.
� Heat Exchanger (optional for all models)
� Fill Port
� Pressure Switch (PES-Series, optional for other models)
� Oil Level Indicator
� Adjustable Relief Valve
Flow Chart
Oil
Flo
w (i
n3/m
in)
�
Pressure (psi) �
Submerged PE-Series (@ 60 Hz)
¤
Dimensions shown in inches.
13 @ 115-1-50/606.75 @ 230-1-50/60
® 77
Submerged Electric Pumps Ordering Matrix
P E M - 1 3 01 B1
ProductType
2MotorType
3PumpType
4PumpSeries
5ValveType
6Reservoir
Size
7Motor
Voltage
1 Product TypeP = Pump
2 Motor TypeE = Electric motor
3 Pump TypeD = DumpJ = JogM = ManualR = Remote (Solenoid) 1)2)
S = Pressure switch
4 Pump Series1 = .5 hp, 10,000 psi
5 Valve Type0 = Dump2 = 3-way, 2-position, normally open3 = 3-way, 3-position, tandem center 4 = 4-way, 3-position, tandem center
6 Reservoir Size01 = 1.5 gallon
7 Motor Voltage and Heat ExchangerB = 115 V, 1 Ph, 60 Hz 1)
D = 115 V, 1 Ph, 60 Hz 1)
with heat exchangerE = 230 V, 1 Ph, 50 Hz 2)
F = 230 V, 1 Ph, 50 Hz 2)
with heat exchangerI = 230 V, 1 Ph, 60 Hz
1) Can also run at 50 Hz with manual valve2) Can also run at 60 Hz with manual valve
CUSTOM BUILD YOUR SUBMERGED PUMPIf the Submerged Pump that would best fit your application cannot be found in the chart on page 75, you can easily build your customsubmerged pump here.
� This is how a Submerged Pump Model Number is built up:
Model Number: PER-1301B
The PER-1301B is a .5 hp, 10,000 psi, submerged electricpump, with 1.5 gallon usable oilcapacity, a 3-way, 3-positionmodular, remote solenoid valve and a 115 V, 1 Phase, 60 Hz motor.
Ordering Example The PER-1301B, PER-1401B, PER-1301D and PER-1401D include aModular (solenoid) Valveand pilot operating check.
Page: 132
Hoses
Enerpac offers a completeline of high-quality hydraulichoses. To ensure theintegrity of your system,
specify only genuine Enerpac hydraulic hoses.
Page: 116
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components section for a full range of gauges.
Page: 122
PE Series
Reservoir Capacity:
1.5 gal.Flow at Rated Pressure:
20 in3/min.Motor Size:
.5 hpMaximum Operating Pressure:
10,000 psi
www.enerpac.com
78 www.enerpac.com
Heavy-duty bearings
Self-priming, high-flow 1st stage pump
Balanced eccentric
Oil bath
Replaceable pistoncheck valves
Motor lip seal
Introducing the Z-Class power pumps from Enerpac—pumps that run cooler, use lesselectricity and are easy to service.
Enerpac has used the latest metallurgical, bearing
and seal technologies to produce a pump whose
features and benefits far surpass the electric pumps
that are available today. By reducing the number of
moving parts, improving flow
dynamics and decreasing friction,
Z-Class pumps will
stay on the job longer,
require less energy
to operate and
when needed,
have lower
service costs.
Z-Class electric pumps fromEnerpac—simply the best pumpyou will ever use.
Z-Class Pumps ¤
ZU4ZE3ZE4ZE5ZE6
www.enerpac.com 79
Z-Class factory installed options & accessoriesExtensive list of accessories including heatexchanger, roll-bars, skid bar, pressure transducer,return line filter and level and temperatureswitches, allow complete pump control over a widerange of industrial applications.
Z-Class electric pumps for your applicationAvailable in one flow range for universal motorand 4 flow ranges for induction motor. Choosefrom single or two-stage models to provide theoptimum cylinder and tool performance for almostany industrial application.
An Innovation in Pump Design
Highly efficient design provides increased flowrates, reduced heat generation and a decrease inpower consumption. This means improved tool speed and increased service life—whichresults in higher productivity and lower operatingcosts.
Heavy-duty bearings extend pump life byreducing friction, reducing surface-loading andlowering bearing stresses.
Pump cavity oil bath extends pump life byreducing heat, improving lubrication and reducingwear.
Self-priming, high-flow 1st stage pumpincreases pump performance by super-chargingthe 2nd stage piston pump—improving oil flow inboth hot and cold weather operation.
Balanced rotating components reduce vibrationcreating a smoother running pump—reducingwear, friction and sound levels.
Replaceable piston check-valves increaseservice life of major pump components.
Ergonomic low-voltage pendant features sealedswitches and operates at 15 vdc for improvedoperator safety.
Back-lit LCD on select Z-Class pumps• pump usage information, hour and
cycle counts• low-voltage warning and recording• offers self-test and diagnostic capabilities• information displayed in 6 languages• pressure read-out (when used with
the optional pressure transducer)• adjustable trigger pressure setting
(when used with the optional pressure transducer)
Flow @ 10,000 psi
PumpSeries
MotorSize
ZU4 Series Pump Applications• Mobile: when frequent pump
transport is required and/or on remote locations
• Universal motor: 1-phase, runs well under poor voltage supply, using generator power supply or using long extension cord
• Duty-cycle: for intermittent applications• Cylinders and tools: for medium to large
size single- and double-acting applications and high speed.
ZE Series Pump Applications• Stationary: when pump remains
in one location• Induction motor: 1 and 3-phase for high
cycle usage• Duty-cycle: for heavy-duty, extended cycle
application• Cylinders and tools: for medium to large size
single- and double-acting applications and high speed.
Z-Class Pumping Element — The Heart of Your Hydraulic System
60 in3/min40 in3/min60 in3/min
120 in3/min200 in3/min
1.7 hp1.0 hp1.5 hp3.0 hp7.5 hp
8080 www.enerpac.com
¤
�
• Features Z-Class high-efficiency pump design; higheroil flow and bypass pressure, cooler running andrequires 18% less current draw than comparablepumps
• Powerful 1.7 hp universal electric motor provides highpower-to-weight ratio and excellent low-voltageoperating characteristics
• High-strength, molded composite shroud protectsmotor and electronics, while providing an ergonomic,non-conductive handle for easy transport
• Low-voltage pendant provides additional safety for theoperator (remote control units)
• LCD readout provides a number of diagnostic andreadout capabilities never before offered on a portableelectric pump (included with electric valves, optionalwith manual valves)
ZU-Series, Electric Pumps
� COMMON PUMP MODELSFor technical information and otheroptions see next page.
BASIC PUMP TYPES
Select the model that suits your application.For special requirements contact your Enerpacoffice.
Manual Valve• Ideal choice for most applications• Manual valve control, for single-acting or
double-acting applications• Motor control on shroud
Solenoid Valve• Ideal for lifting applications and where remote
control is required• Motor runs continuously on pumps with VE33
and VE43 valves. With VE32 valve, motor onlyruns during the advance function, whileholding and retracting, the motor is off
• Low-voltage control pendant with 10 ft. cordfor remote motor and valve operation
Dump Valve• Ideal for punching, crimping and cutting• For use when load-holding is not required• Low-voltage control pendant with 10-ft.
cord controls valve and motor
Manual Valve with Pendant• For light production and lifting applications• Manual valve control for single-acting
or double-acting cylinders• Low-voltage control pendant with
10-ft. cord for remote motor operation
Shown from left to right: ZU4108DB-T, ZU4420SB-H, ZU4304ME-K
� Designed to be tough, the ZU4-Series with steelreservoirs will take theabuse of today’sconstruction sites.TheZU4908JE is the ideal pumpfor post tensioningapplications. For post tensioning toolssee page 186.
® 81www.enerpac.com
VM32VM32VM33VM33VM43VM43VM32VM32VM32VM33VM43VM43VE32DVE32DVE32D
---
VE32VE32VE33VE43VE43
----
ZU4204MBZU4208MBZU4308MBZU4320MBZU4408MBZU4420MBZU4204JBZU4208JBZU4220JBZU4308JBZU4408JBZU4420JBN/AN/AN/A
---
N/AN/AN/AN/AN/A
----
ZU4204LBZU4208LBZU4308LBZU4320LBZU4408LBZU4420LBZU4204KBZU4208KBZU4220KBZU4308KBZU4408KBZU4420KBZU4104DBZU4108DBZU4120DB
---
ZU4204SBZU4208SBZU4308SBZU4408SBZU4420SB
----
••••
••••
•••
•••
••
••
••
•••••••••••••••
•••••
••••
•••
•••
•••••••••••••••
•••••
Pump Type Pump Control Usable OilCapacity
(gal)
ManualManualManualManualManualManual
Remote (Man.)Remote (Man.)Remote (Man.)Remote (Man.)Remote (Man.)Remote (Man.)
RemoteRemoteRemote
---
Remote Remote Remote RemoteRemote
----
Model Number115 VAC3)
1 Phase
STD Electric LCD Electric
LCDProductWeightw/oil4)
(lbs)
ZU4 Pump Application
The ZU4 pump is best suitedto power medium to large
size cylinders or hydraulic tools, orwherever high speed, intermittentduty cycle is needed.
Patented Z-Class technology provides high by-pass pressures forincreased productivity, specifically inapplications using long hose runs andhigh-pressure drop circuits like heavylifting or certain double-acting tools.
Its lightweight and compact designmake it ideal for applications whichrequire easy transport of the pump. It utilizes a universal motor which will work well on long extension cords or generator driven electricalpower supplies.
For further application assistancecontact your local Enerpac office.
ZU Series
ZU-Series, Electric Pumps
Reservoir Capacity:
1.0-10.0 gal. Flow at Rated Pressure:
60 in3/min.Motor Size:
1.7 hpMaximum Operating Pressure:
10,000 psi
1) All models meet CE safety requirements. “E” voltage versions also meet all requirements of the European EMC-Directive.2) See valves section for technical information on valve types.3) See custom order matrix for other voltage options.4) Subtract 3 lbs. for STD Electric models.
ValveType2)
Valve FunctionUsed withCylinder
1.02.02.05.02.05.01.02.05.02.02.05.01.02.05.0---
1.02.02.02.05.0----
1)
59697010970109607010971711106373112
---
63738585124
----
115V
230V
82 www.enerpac.com
A
ED
ENER
PA
C
F4XØ .34
C
B
B
C
A
DM8 x 1.25
¤ZU Series, Specifications and Dimensions
ZU4 PerformanceMotorSize
(hp)
Output Flow Rate
(in3/min)
Motor ElectricalSpecification
(volts-ph-Hz)
SoundLevel
(dBA)
Relief ValveAdjustment
Range
(psi)
� Increased output flow andextended brush life increaseproductivity for post-tensioningapplications.
Pump DimensionsUsable
ReservoirCapacity
(gal)A
(in)B
(in)C
(in)D
(in)E
(in)F
(in)
Heat Exchanger(optional)
LCD Electric(optional)
VM43 ValveShown
User AdjustableRelief Valve
Skid bar(optional)
Pressure Transducer(optional)
Breather (shippingplug shown)
Oil Fill PortSAE #10
Oil Level Sight Gauge
Oil Drain
Deep
(shown without side handle)
1/2 NPT Oil Drain
User AdjustableRelief Valve
PressureTransducer(optional)
VM43 Valve Shown
LCD electric (optional)
Handle guard installed on all 2.5, 5 and 10 galreservoirs
Heat exchanger(optional)
Oil Fill Port SAE #10
Breather(shippingplug shown)
ReservoirHandles Includedon all 2.5, 5 and10 Gallon
Oil Level SightGauge
5.6
8.0
6.1
7.1
10.6
11.0
11.3
16.5
16.3
15.7
6.0
6.6
12.0
16.6
19.9
-
-
15.1
19.7
22.7
-
-
11.0
15.6
18.9
1.7 700 535 76 60 115-1-50/60230-1-50/60 85-90 2,000-10,000
1.0
2.0
2.5
5.0
10.0
17.0
19.5
17.6
18.6
22.0
24.8023.40
19.0016.29
9.00
.50
2.54
10.5
0
9.46
3.75
.25
17.6024.00
12.00 .51
18.10
1.30
0 2000 4000 6000 8000 10,0000
100
200
300
400
500
600
700 25
20
15
10
5
0
100 psi 700 psi 5000 psi 10,000 psi
FLOW CHART
Oil
flow
(in3 /
min
)�
Pressure (psi) �Flow (in3/min)
Cur
rent
(am
ps)
�
Current (amps)
® 83www.enerpac.com
Z U 4 4 08 L B - H K T
1 Product TypeZ = Pump Series
2 Motor TypeU = Universal electric motor
3 Flow Group4 = 60 in3/min @ 10,000 psi
4 Valve Type (see page 130 for more details)1 Dump (VE32D)2 3 way/2 position manual or electric (VM32 or VE32)3 3 way/3 position manual or electric (VM33 or VE33)4 4 way/3 position manual or electric (VM43 or VE43)6 3 way/3 position locking manual w/po check (VM33-L)8 4 way/3 position locking manual w/po check (VM43-L)9 4 way/3 position manual w/power seating (VM43-LPS)
5 Reservoir Size (useable capacity)04 = 1.0 gallon08 = 2.0 gallon10 = 2.5 gallon (includes side handles)20 = 5.0 gallon (includes side handles)40 = 10.0 gallon (includes side handles)
6 Valve OperationD = Dump (solenoid valve w/pendant and LCD Electric)J = Jog (manual valve w/pendant and Standard Electric (i.e. w/o LCD)K = Jog (manual valve w/pendant and LCD Electric)L = Manual valve w/LCD Electric (w/o pendant)M = Manual valve w/Standard Electric (i.e. w/o LCD) [w/o pendant]S = Solenoid valve w/pendant and LCD Electric
7 VoltageB = 115V 1 ph 50/60HzE = 208-240V 1 ph 50/60 Hz (w/European plug CE RF compliant)I = 208-240V 1 ph 50/60 Hz (w/NEMA 5-15 plug)
8 OptionsF = FilterG = 0-15,000 psi Gauge (2 1/2") 1)
H = Heat exchanger 2)
K = Skidbar (1 and 2 gallon reservoirs only)L = Level/temp switch 2) 3)
N = No reservoir handles (includes lifting eyes)R = Roll BarT = Pressure transducer U = Foot switch
1) Pressure gauge not available on pump models with pressure transducer 2) These options require LCD electric3) Not available on 1 and 2 gallon reservoirs
ZU Series
Reservoir Capacity:
1.0-10.0 gal.Flow at Rated Pressure:
60 in3/min.Motor Size:
1.7 hpMaximum Operating Pressure:
10,000 psi
CUSTOM BUILD YOUR ZU4 SERIES PUMPIf the ZU4 Series pump that would best fit your application cannot be found inthe chart on page 81, you can easily build your custom ZU4 Series pumphere.
� This is how a ZU-Series pump model number is built up:
2MotorType
3Flow
Group
4Valve Type
5Reservoir
Size
6Valve
Operation
7Voltage
8Options
8Options
8Options
8Options
1Product
Type
ZU-Series, Ordering Matrix
Speed Chart
To determine how a submergedpump will operate your cylinder,
see the Pump/Cylinder Speed Chart in the “Yellow Pages”.
Page: 113
Ordering Example
Model Number: ZU4408LB-HKT
ZU4408LB-HKT is a 60 in3/min at 10,000psi pump with a 4-way, 3-positionmanual valve, a 2 gal (8-liter) reservoir,operates on 115V 1ph 50/60 Hz and isspecified with optional LCD electricalpanel, heat exchanger, pressuretransducer and skidbar.
Torque Wrench Pumps
System matched air andelectric pumps provide controlto operate Enerpac TorqueWrenches.
Page: 212
¤
84
ZPT-U4 * ± 0,5%
ZCF-2 *
ZLS-U4
www.enerpac.com
Back-lit LCD*• Pump usage information, hour
and cycle counts• Low-voltage warning and
recording• Self-test and diagnostic
capabilities• Information can be displayed in
six different languages (English,Spanish, German, French, Italian,Portuguese)
* Optional with manual valves, included withsolenoid valves
Pressure Transducer*• More durable than analog gauges
(against mechanical and hydraulicshock)
• More accurate than analog gauges(0.5% full scale of pump)
• Calibration can be fine tuned forcertification
• “Set pressure” feature turns off motorat user defined pressure (or shiftsvalve to neutral on models withVE33/VE43 valves)
• Display pressure in psi, bar, or MPa * Requires LCD Electric
ZU-Series Factory Installed Options & Accessories
ZU4-Series Features
The LCD is factoryinstalled and cannot beordered separately. Refer
to page 80 for selection chart andpage 83 for ordering matrix.
Hoses
Enerpac offers acomplete line of high-quality hydraulic hoses.To ensure the integrity
of your system, specify onlyEnerpac hydraulic hoses.
Gauges
Minimize the risk ofoverloading and ensurelong, dependableservice from your
equipment. Refer to the SystemComponents section for a full rangeof gauges.
Page: 122
Page: 116
Foot Switch• Hands-free remote control on
solenoid dump and 3-positionvalves
• With 10 foot cord
AccessoryKit No.
Can be used on ZU4pumps with
* Add suffix U for factory installation.
Solenoid VE-Series valves
Level/Temperature Switch
• Ensures feedback on pump oillevel and temperature
• Drop-in design allows for easyinstallation to pump reservoir
• Plugs directly into pump electrical enclosure
• Built-in thermal sensing shuts offpump when unsafe operatingtemperature is reached
• Oil level switch shuts down pumpbefore oil reaches an unsafeoperating level
ModelNumber
OperatingTemperature
(° F)
Weight
(lbs)
MaximumPressure
(psi)
* Add suffix L for factory installation.* Add suffix T for factory installation.
AccessoryKit modelnumber
AdjustablePressure
Range(psi)
Switch-point
repeatability
Dead-band
(psi)
50-10,000 50 40-230 .11150
® 85
ZHE-U4 *
SBZ-4 *SBZ-4L *ZPF *
* Add suffix F for factory installation.
www.enerpac.com
Skidbar*
• Provides easy two-hand lift• Provides greater pump stability
on soft or uneven surfaces• Also available as an add-on kit
(model number SBZ-4) * 1 and 2 gallon reservoirs only
Heat Exchanger*
• Removes heat from thebypass oil to provide cooleroperation
• Stabilizes oil viscosity,increasing oil life and reduceswear of pump and otherhydraulic components
* Requires LCD Electric
Heat Exchanger
Can be factory installed on ZU4-Series LCD Electric
pumps.
• Extends system life.• Stabilizes oil temperature at a
maximum of 130 °F at 70 °Fambient temperature.
Do not exceed maximum oil flow andpressure ratings. Heat exchanger isnot suitable for water-glycol or highwater based fluids.
ThermalTransfer *
Btu/h
Maximumpressure
(psi)
Maximumoil flow
(GPM)
Voltage
(VDC)
* At GPM at 70 °F ambient temperature.
ZU-Series Factory Installed Options and Accessories
Weight
(lbs)
Fits on reservoir
1, 2, 2.5, 5, and 10 gallon
AccessoryKit No.
* Add suffix H for factory installation.
* Add suffix K for factory installation.
Accessory Kit No.
For ZU-Series pumps with reservoir
Weight
(lbs)
1-2 gal. w/o heat exchanger1-2 gal. with heat exchanger
AccessoryKit ModelNumber
MaximumPressure
(psi)
MaximumOil Flow
(GPM)
By-passSetting
(psi)
Return Line Filter • 25 micron nominal filter removes
contaminants from return oil flowbefore allowing it back into tank
• Internal by-pass valve preventsdamage if filter is dirty
• With maintenance indicator• Replaceable filter element PF25
ZU Series
Reservoir Capacity:
1.0-10.0 gal.Flow at Rated Pressure:
60 in3/min.Motor Size:
1.7 hpMaximum Operating Pressure:
10,000 psi900 900 7.0 12
4.87.0
9.1
200 12.0 25
¤
86
�
••••
••••
•••••••
•••
••
••••
••••••••••••••••••••••••
••••••
••••
•••••••
••••••••••••••••••••••••
VM32VM33VM33VM33VM43VM43VM43VM32VM32VM33VM33VM43VM43VE32DVE32DVE32DVE32D
VE33VE33VE33VE43VE43VE43VE43
89
www.enerpac.com
UseableOil
Capacity
(gal)
Valve**Model
Number
Valve Function
The New Standard for IndustrialApplications, Z-Class
Shown from left to right: ZE3304MB-K, ZE4110DB-FHR
Solenoid Dump Valve with electric box and LCD
• Ideal for punching, crimping and cutting• For use when load holding is not required• Push-button control pendant with 10 ft. cord controls
the valve and motor
Manual Valve with electric box and LCD• Ideal choice for most applications• Manual valve control, for both single-acting or
double-acting applications• Manual motor control
Solenoid 3-position Valve with Electric Box and LCD
• Ideal for production and lifting applications• All valves are 3-position for Advance-Hold-Retract• Push-button control pendant with 10 ft. cord controls
the valve and motor
BASIC PUMP CONFIGURATIONS
Select your ZE pump model here for mostapplications. For special requirements, see the ZE Pump ordering matrix.
Pump Type
� SELECTION CHART *
* Models in this chart are 115 VAC, 1-phase at 50/60 Hz for ZE3-4 or 220 VAC, 3 phase at 50/60 Hz for ZE5-6. For other options, please refer tothe ZE Pump ordering matrix ** See Valve Section for technical information.
Used withCylinder
All models in the chart beloware the industry’s mostcommonly selected pumpconfigurations. See the Z-Class
pump ordering matrix for moreoptions.
Page:
Manual Valve without electric box or LCD
• Ideal choice for most applications• Manual valve control, for both single-acting or
double-acting applications• Manual motor control• On/off switch on 1-phase electric motor
ZE-Series Electric Pumps
2.02.05.0
10.02.05.0
10.02.02.55.0
10.05.0
10.01.02.02.55.0
2.02.55.02.02.55.0
10.0
® 87www.enerpac.com
ZE3208MBZE3308MBZE3320MBZE3340MBZE3408MBZE3420MBZE3440MBZE3208LBZE3210LBZE3320LBZE3340LBZE3420LBZE3440LBZE3104DBZE3108DBZE3110DBZE3120DB
ZE3308SBZE3310SBZE3320SBZE3408SBZE3410SBZE3420SBZE3440SB
ZE4208MBZE4308MBZE4320MBZE4340MBZE4408MBZE4420MBZE4440MBZE4208LBZE4210LBZE4320LBZE4340LBZE4420LBZE4440LBZE4104DBZE4108DBZE4110DBZE4120DB
ZE4308SBZE4310SBZE4320SBZE4408SBZE4410SBZE4420SBZE4440SB
ZE5320MGZE5340MG
ZE5420MGZE5440MG
ZE5210LGZE5320LGZE5340LGZE5420LGZE5440LG
ZE5110DGZE5120DG
ZE5310SGZE5320SG
ZE5410SGZE5420SGZE5440SG
ZE6320MGZE6340MG
ZE6420MGZE6440MG
ZE6210LGZE6320LGZE6340LGZE6420LGZE6440LG
ZE6110DGZE6120DG
ZE6310SGZE6320SG
ZE6410SGZE6420SGZE6440SG 89
• Features Z-Class high-efficiency pump design; higher oilflow and by-pass pressure, cooler running and requires18% less current draw than comparable pumps
• Totally enclosed, fan-cooled industrial electric motorssupply extended life and stand up to harsh industrialenvironments
• Low-voltage pendant, on certain models, providesadditional safety for the operator
• Multiple valve and reservoir configurations provideapplication specific models to match the most demandingindustrial applications
• High-strength, molded electrical enclosure protectselectronics, power supplies and LCD readout from harshindustrial environments
• LCD readout provides a number of diagnostic and readoutcapabilities never before offered on an industrial pump(included with electric valve models, optional on othermodels)
ZESeries
Reservoir Capacity:
1.0 - 10 gal.Flow at Rated Pressure:
40 - 200 in3/minMotor Size:
1.0 - 7.5 hpMaximum Operating Pressure:
10,000 psi
* All models in this chart are 115 VAC, 1-phase at 50/60 Hz. For other options please refer to the ZE Pump ordering matrix.
ZE3 Series (1.0 hp)Output Flow Rate at10,000 psi: 40 in3/min
ZE4 Series (1.5 hp)Output Flow Rate at10,000 psi: 60in3/min
Model Number
Model Number
Model Number
Model Number
(lbs) (lbs) (lbs) (lbs)
Weight Weight Weight Weight
All Z-Class electric pumps areCSA and CE compliant.
Single-Stage or Two-Stage Pumps
Choose single-stage pumpsfor applications that require
constant flow regardless ofpressure, such as testing orclamping.
Two-stage pumps have anincreased output flow at lowpressure to allow fast movementtowards the load, for reduced cycletimes and increased productivity.
How to Order Single-Stage Pumps
To specify a single-stagepump, place the letter “S” at the endof the model number.
For example:
ZE5320LG-S
This is a 3.0 hp ZE5 series pumpwith a VM33 manual valve, 5 gallonreservoir, LCD electrical box, 220VAC, 50/60 Hz 3-phase motor andsingle-speed option.
ZE5 Series (3.0 hp)Output Flow Rate at
10,000 psi: 120 in3/min
ZE6 Series (7.5 hp)Output Flow Rate at
10,000 psi: 200 in3/min
ZE-Series Electric Pumps
Page:
9697
13318397
13318310110613818813918995
105110141
107112153117122153204
104105141191106141191110115147197147197104114119150
125130161125130161212
152203
152203
132160210160210
136163
147174
147174225
192243
192243
172200250200251
176203
188214
188214265
¤
88 www.enerpac.com
B A
D1
A
H
CE
D
1
B
2
3
6
4
C
B
H1
5
B
2 4
37 8
7
0 2,000 4,000 6,000 8,000 10,000
100
0
200
300
400
500
600
700
900
800
1000
0
5
10
15
20
25
0 2,000 4,000 6,000 8,000 10,000
100
0
200
300
400
500
600
700
900
800
1000
0
5
10
15
20
25
0 2,000 4,000 6,000 8,000 10,000
100
0
200
300
400
500
600
700
900
800
1000
0
5
10
15
20
25
0 2,000 4,000 6,000 8,000 10,000
100
0
200
300
400
500
600
700
900
800
1000
0
5
10
15
20
25
3
4
5
6
75
75
75
80
RPM
Two-stageZE3 and ZE4 Ampdraw at 115V/1ph
A B C D D1 E H
Output flow rate is listed at 60 Hz.Flow rate will be approximately 5/6 of these values at 50 Hz.
Oil
Flo
w (i
n3/m
in)
�
Pressure (psi) �
� FLOW CHARTS
Single-stage
ZE3 Series
Cur
rent
(Am
ps)
�
Oil
Flo
w (i
n3/m
in)
�
Cur
rent
(Am
ps)
�
Pressure (psi) �
ZE4 Series
Oil
Flo
w (i
n3/m
in)
�
Pressure (psi) �
ZE5 Series
Cur
rent
(Am
ps)
�
Oil
Flo
w (i
n3/m
in)
�
Cur
rent
(Am
ps)
�
Pressure (psi) �
ZE6 Series
ZEPump Series
Output Flow Rate
(in3/min)
Operation SoundLevel
(dBA)
Relief ValveAdjustment
Range(psi)
Motor SizeAvailable Reservoir Sizes (useable oil)
(gal)
Single-stageTwo-stageSingle-stageTwo-stageSingle-stageTwo-stageSingle-stageTwo-stage
� PERFORMANCE CHART
ZE-Series Pumps with 1 and 2 gallon reservoir
� User adjustable relief valve on all manualand solenoid valves:
3/8" NPTF on A and B ports
1/4" NPTF on auxiliary ports
� Electric Box (Optional w/manual valve)
� Heat Exchanger (Optional)
� Roll Bar (Optional)
� Return Line Filter (Optional)
� Skid Bar (Optional)
� Oil Drain
� Oil Level/Temperature Switch (Optional)
ZE-Series Pumps with 2.5, 5, 10 gallon reservoir
ReservoirSize
(useable oil)
(gal)
ZE-Series Pump Dimensions (in)
User Adjustable Relief Valve
All VM and VE-Series have a user adjustable relief valveto allow the operator to easily
set the optimum working pressure.
M8 x 1.25.25” deep
4 x Ø.34Mountinghole
Single-stageTwo-stage
ZE5 and ZE6 Ampdraw at 208V/3ph
ZE-Series, Specifications and Dimensions
100 psi 700 psi 5,000 psi 10,000 psi
4345064650128850220900
40406060
120120200200
4338564600126825215890
42426262123123210210
hp
1.0
1.5
3.0
7.5
1750
1750
1750
3450
1000 -10,000
1000 -10,000
1000 -10,000
1000 -10,000
1, 2, 2.5, 5, 10
1, 2, 2.5, 5, 10
2.5, 5, 10
2.5, 5, 10
1.0
2.0
2.5
5.0
10.0
5.6
8.1
6.1
7.1
10.6
11.0
11.3
16.5
16.5
15.7
6.0
6.6
12.0
16.6
19.9
–
–
15.1
19.7
22.7
–
–
14.6
19.2
22.5
20.2
22.6
23.6
24.6
28.1
27.9
17.60 5.20
14.9
Max
11.9
Max
6.42
25.1
19.025.0
16.3
2.56
12.7
10.51
12.0
9.45
9.0
25.0
3.75
–
–
11.0
15.6
18.9
® 89www.enerpac.com
1Product
Type
2MotorType
3Flow
Group
4ValveType
6Valve
Opera-tion
5Useable
OilCapacity
7Voltage
8Options
CUSTOM BUILD YOUR ZE SERIES PUMPIf the ZE Series pump that would best fit your application cannot be found in thechart on page 86, you can easily build your custom ZE Series pump here.
� This is how a ZE Series Pump model is built up:
1 Product TypeZ = Pump Class
2 Prime moversE = Induction Electric Motor
3 Flow Group3 = 40 in3/min @ 10,000 psi4 = 60 in3/min @ 10,000 psi5 = 120 in3/min @ 10,000 psi1)
6 = 200 in3/min @ 10,000 psi1)
4 Valve Types0 = No valve w/coverplate1 = Dump (VE32D)2 = 3 way/2 position manual
(VM32)3 = 3 way/3 position manual or
electric (VM33 or VE33)4 = 4 way/3 position manual or
electric (VM43 or VE43)6 = 3 way/3 position locking
manual w/po check (VM33L)8 = 4 way/3 position locking
manual w/po check (VM43L)
5 Useable Oil Capacity 04 = 1.0 gallon2)
08 = 2.0 gallon2)
10 = 2.5 gallon20 = 5.0 gallon40 = 10.0 gallon
6 Valve OperationD = Dump valve
(w/ pendant and LCD)L = Manual valve
(w/o pendant, w/ LCD)M = Manual valve 6)
(w/o pendant or LCD)N = No valve 6)
(no electrical box)S = Solenoid valve
(w/ pendant and LCD)W = No valve
(w/o pendant and LCD)
7 VoltagesSingle Phase
B = 115V 1 ph 50-60Hz 3)
E = 208-240V 1 ph 50-60 Hz European Plug
I = 208-240V 1 ph 50-60 HzUSA Plug
Three Phase 6)
M = 190-200V 3ph 50-60HzG = 208-240V 3ph 50-60HzW = 380-415V 3ph 50-60HzK = 440V 3ph 50-60HzJ = 460-480V 3ph 50-60HzR = 575V 3ph 60Hz
Ordering Example 1
Model Number: ZE4420MB
ZE4420MB is a 60 in3/min, 10,000 psi pump with a 4 way, 3-positionmanual valve, a 5 gallon reservoir,operates on a 115 VAC 1 ph 50/60 Hzmotor and includes standard electricalpackage.
Ordering Example 2
Model Number: ZE6440SG-HNU
ZE6440SG-HNU is a 200 in3/min, 10,000 psi pump with a 4 way, 3-positionelectric valve, a 10 gallon reservoir,operates on a 230 VAC 3 ph 50/60 Hzmotor. It includes LCD electricalpackage and foot switch on 10 ft cord,no reservoir handles and the optionalheat exchanger.
ZESeries
Reservoir Capacity:
1 - 10 gal.Flow at Rated Pressure:
40 - 200 in3/min.Motor Size:
1.0 - 7.5 hpMaximum Operating Pressure:
10,000 psi
8Options
8Options
8Options
8 Options (specify in alphabetical order)
F = FilterG = 0-15,000 psi Gauge (21/2") 7)
H = Heat Exchanger 4)
K = Skidbar (1 and 2 gal. reservoirs only)
L = Level/temp switch 4) 5)
N = No reservoir handles (includes lifting eyes)
P = Pressure switch 4)
R = Roll barS = Single stageT = Pressure transducer 4) 7)
U = Foot switch 4)
1) ZE5 and ZE6 series pumps only available with 3-phase motors.2) 1 and 2 gallon reservoirs only available on ZE3 and ZE4 series pumps.3) 115 volt pumps are supplied with CE and CSA approved 15 amp plug for
intermittent use. 20 A circuit recommended for frequent full pressure use.4) These options require LCD electrical package. Pressure switch option only
available on manual valves without locking valve. The LCD electrical packagecan accept either a pressure switch or pressure transducer, but not both.
5) Not available with 1 and 2 gallon reservoirs.6) Standard Electric models with 3-phase motors are shipped without cord,
motor starter or overload protection.7) Pressure gauge not available on pump models with pressure transducer.
Pressure transducer provides digital pressure readout on LCD display.
Single-Stage or Two-Stage
Choose single-stage pumps forapplications that require constant
flow regardless of pressure, such astesting or clamping.
Two-stage pumps have an increasedoutput flow at low pressure to allow fastmovement towards the load, for reducedcycle times and increased productivity.
ZE Electric Pump Ordering Matrix
¤
90
ZRB-04 *ZRB-10 *ZRB-20 *ZRB-40 *
SBZ-4 *SBZ-4L * ZCF-2 *
ZPF *ZLS-U4 *
www.enerpac.com
Electric Box 1)
• Back-lit LCD• Pump usage information, hour and
cycle counts• Low-voltage warning and recording• Self-test and diagnostic capabilities• Pressure read-out 2)
• Auto-mode pressure setting 2)
• Information can be displayed in sixlanguages 3)
1) Included on pumps with solenoid valves.Can be factory installed on pumps withmanual valve
2) When used with optional pressuretransducer
3) English, French, German, Italian, Spanishand Portuguese
Skid Bar • Provides easy two-hand lift• Provides greater pump stability on
soft or uneven surfaces
Roll Bars• For easy portability and hoisting• Protects pump and electric box• Available for all reservoir sizes
Return Line Filter • 25 micron nominal filter removes
contaminants from return oil flowbefore allowing it back into tank
• Internal by-pass valve preventsdamage if filter is dirty
• With maintenance indicator• Replaceable filter element PF25
Level/Temperature Switch 4)
• Shuts down pump before oil levelreaches an unsafe level, avoidingdamage due to cavitation
• Shuts down pump when unsafe oiltemperature is reached
• Ideal if pump is used in remote areawithout visual access to oil level
4) 24 V, requires Electric Box. Available for2.5, 5 and 10 gallon reservoirs
Foot Switch 5)
• Hands-free remote control onsolenoid dump and 3-position valves
• With 10 foot cord 5) 15 V, requires Electric Box
Accessory KitNumber
For ZE-Series pumps with reservoir
Weight
(lbs)
* Add suffix K for factory installation, see ordering matrix.
AccessoryKit ModelNumber
MaximumPressure
(psi)
MaximumOil Flow
(GPM)
By-passSetting
(psi)
* Add suffix F for factory installation, see ordering matrix.
AccessoryKit ModelNumber
Fixed Temperature
Signal(°F)
Operating Tempera-
ture(°F)
Max.Pressure
(psi)
* Add suffix L for factory installation, see ordering matrix.
AccessoryKit Number
Can be used on ZE-Seriespumps with
* Add suffix U for factory installation, see ordering matrix.
Solenoid VE-Series valves1-2 gal. w/o heat exchanger1-2 gal. with heat exchanger
Accessory Kit Number
Fits on reservoir Weight
(lbs)
* Add suffix R for factory installation, see ordering matrix.
1 and 2 gallon2.5 gallon5 gallon10 gallon
ZE-Series, Options & Accessories
75 40 - 230 150 200 12.0 25
12.113.213.213.2
4.87.0
® 91www.enerpac.com
ZPT-U4 * ± 0,5% ZPS-E3 * ± 2% 3/8”
ZCP-1ZCP-3
ZHE-E04 *ZHE-E10 *
VE32DVE32, VE33, VE43
Heat Exchanger 4)
• Removes heat from bypass oil toprovide cooler operation
• Stabilizes oil viscosity, increasingoil life and reduces wear of pumpand other hydraulic components.
Pressure Transducer 1)
• Displays pressure on LCD in bar,MPa or psi
• More accurate than analog gauge• Calibration can be fine-tuned for
certification• Easy-viewing variable rate display • “Set pressure” feature turns off
motor at user defined pressure1) 24 V, requires Electric Box
Pressure Switch 2)
• Controls pump, monitors system• Adjustable pressure 500-10,000 psi• Includes glycerine filled 15,000 psi
pressure gauge G2536L• Accuracy ± 1,5% of full scale 2) 24 V, requires Electric Box. Not available
in combination with pressure transducer.
Pendants 3)
• For pump types with valveoperation “W” (No Valve, withElectric Box, without pendant)
3) When ordering Enerpac VE-Seriessolenoid valve the pendant must beordered separately. Pendant connectionto be plugged into electric box
AccessoryKit
Modelnumber
AdjustablePressure
Range(psi)
Switch-point
repea-tability
Dead-band
(psi)
* Add suffix T for factory installation, see ordering matrix.
AccessoryKit Number
Fits on reservoir
* Add suffix H for factory installation, see ordering matrix.
ZHE-Series Heat Exchangers
Heat exchanger stabilizes oiltemperature at 130 °F at 70 °F
ambient temperature. Thermal transfer at 5 GPM and 70 °F ambient temperature:900 Btu/hour.Do not exceed max. oil flow of 7.0 GPMand max. pressure of 300 psi. Notsuitable for water-glycol or high waterbased fluids.
AccessoryKit
Modelnumber
Switch-point
repea-tability
Deadband
(psi)
OilPorts
(NPT)
* Add suffix P for factory installation, see ordering matrix.
1 and 2 gallon2.5, 5, and 10 gallon
Weight
(lbs)
PendantModelNumber
To be used with solenoidvalve:
ZE-Series, Factory Installed Options & Accessories
ZESeries
Reservoir Capacity:
1 - 10 gal.Flow at Rated Pressure:
40 - 200 in3/min.Motor Size:
1.0 - 7.5 hpMaximum Operating Pressure:
10,000 psi
50-10,000 50 115-550
9.09.0
�
www.enerpac.com92
8000-Series Electric Pumps
• Panel-mounted pressure gauge and adjustable relief valvefor system pressure control
• Two-speed pump design, with high by-pass pressure, for rapid cylinder advance
• Dual voltage motor (230/460 VAC, 3 phase, 60 Hz)• Full length reservoir sight tube with integral thermometer
for ease in monitoring oil level and temperature
The Largest Pumpfor the Largest Jobs
Shown: PEM-8418
Locking Valves
Pumps with VM-4 manualvalves are available with VM-4L manual valves forpositive load holding.
Add suffix “L” to pump model number.
Page: 130
FS-34 Foot Control Switch
This 3-position switch allowshands-free control of thesolenoid valve on the pump. Operates 24 and
115 V valves that use the squareelectrical connector.
Hoses
Enerpac offers a completeline of high-quality hydraulichoses. To ensure theintegrity of your system,
specify only genuine Enerpac hydraulic hoses.
Page: 116
� With similar specifications, a gasoline poweredEGM-8000 Series is shown here performing asynchronized lift.
¤
8000-Series Electric Pumps
Single-acting
Double-acting
Usable OilCapacity
(gal)
Used with
Cylinder
PressureRating
(psi)
ValveType
OutputFlow Rate
(gal/min)
Weight
(lbs)
CurrentDraw
(Amps)
Manual(VM-2)
Manual(VM-4)
Solenoid(VSP-4)
ModelNumber
SoundLevel
(dBA)
MotorVoltage*
(VAC)
ValveFunction
3-way, 2-pos.
4-way,3-pos.
4-way,3-pos.
PE Series
Reservoir Capacity:
25 gal.Flow at Rated Pressure:
2.0 gal/min.Motor Size:
12.5 hpMaximum Operating Pressure:
10,000 psi
1st stage 1st stage2nd stage 2nd stage
About the 8000 Series
The 8000 Series is thelargest pump in the Enerpac
line and the best choice to powermost large size cylinders, multiplecylinder circuits, and applicationswhere the need for high speedrequires high flow rates.The 8000 Series, with its largereservoir capacity, is best suited
for large jobs and may be the onlysolution because of the required oil capacity.For further application assistancesee our “Yellow Pages”, or consultyour local Enerpac office.
Page: 104
Speed Chart
To determine how an 8000Series pump will operate your
cylinder, see the Pump/Cylinder SpeedChart in the “Yellow Pages”.
Page: 113
Flow Chart
Oil
flo
w (g
al/m
in)
�
Pressure (psi) �
8000 Series
®www.enerpac.com 93
Dimensions shown in inches.
Relief Valve
Fill Port
Gauge Shut Off Valve
Drain Plug
Oil Level andTemperature Gauge
Gauge 15,000 psi
Magnetic Starter
Valve Location
* Consult Enerpac for availability of other voltages.
181818181818
3,7003,7003,7003,7003,7003,700
2.02.02.02.02.02.0
720720720720765765
PEM-8218PEM-8218CPEM-8418PEM-8418CPER-8418PER-8418C
78-8478-8478-8478-8478-8478-84
230460230460230460
33.0 16.533.016.533.016.5
10,00010,00010,00010,00010,00010,000
4.44.44.44.44.44.4
46.00
22.25
35.00
0 2000 4000 6000 8000 10,0000
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5