Download - Impol Solar Mounting Systems
Solarmountingsystems
www.impolsolar.comBuilding foundation for a greener future
Impol-Montal d.o.o.Partizanska ulica 382310 Slovenska Bistrica Slovenija
phone: +386 (0)2 845 31 00fax: +386 (0)2 818 12 19e-mail: [email protected]: www.impolsolar.com
More InforMatIon: www.impolsolar.com
02
Limitations
Characteristics of the system
FLat rooFs
simple and quick assembly light construction simple transportation a small number of elements suitable for all types of roof coverings excellent cooling of modules serial elevation angle from 15° to 25°
orientation of modules
Maximal range of triangels ≤ 2000 mm
Minimal number of anchors for 1HM triangle ≥ 2
Minimal number of anchors for 2HM and 1HV triangle ≥ 3
technical limitations / Description of limitations
6
72
12
!
+ +
Fixation elements
Pre-aSSeMBled fIxatIon Screw
for use on roofs covered with trapezoidal sheet metal and for corrugated roof coverings.
Individual solutions for different types of roof coverings.
the possibility of connecting multiple rows. rows are connected at the bottom of triangles with expansion profiles.
1 type of horizontally oriented modules
Triangle 1Hm enables the following fastening of modules:
Triangle 1mV/2mH enables the following fastening of modules:
HoriZoNTal orIentatIon of ModuleS
2-H2 types of horizontally oriented modules
1 type of vertically oriented modules
1-V
HoriZoNTal orIentatIon of ModuleS
VerTical orIentatIon of ModuleS
10
14
Solar mounting SyStemS03
Limitations
Characteristics of the systems
PitChed rooFs
simple assembly light construction anchoring on secondary profiles suitable for all types of roof coverings excellent cooling of modules
Installation on secondary profile
orientation of modulesan indefinite number of horizontally oriented modules is possible
Maximal range of triangels ≤ 1100 mm
Suitable for roofs with the angle 5° ≤ α ≤ 75°
technical limitations / Description of limitations
an indefinite number of vertically oriented modules is possible
HoriZoNTal orIentatIon of ModuleS
VerTical orIentatIon of ModuleS
Fixation elementsPre-aSSeMBled adJuStaBle Hook
Pre-aSSeMBled fIxatIon Screw
used for plain tile coverings. used for corrugated roofs as well as for trapezoidal sheet metal roofing.
6
8
1
7
!
+ +Individual solutions for different types of roof coverings.
fixation with a trapezoidal fixation element.
More InforMatIon: www.impolsolar.com
04
Characteristics of the systems
Limitations
PitChed rooFs
simple and quick assembly least expensive option extremely light construction suitable only for trapezoidal metal roofs direct assembly of profiles on trapezoidal metal
Anchoring in trapezoidal metal
orientation of modulesan indefinite number of horizontally oriented modules is possible
an indefinite number of vertically oriented modules is possible
Minimal thickness of sheet steel ≥ 0,6 mm
Minimal thickness of alu trapezoidal sheets ≥ 1 mm
Maximal trapezoidal range ≤ 500 mm
Minimal length of profile ≥ double length of trapezoid + 30 mm
Minimal width of the top of trapezoid ≥ 15 mm
Suitable for roofs with the angle 5° ≤ α ≤ 75°
technical limitations / Description of limitations
HoriZoNTal orIentatIon of ModuleS
VerTical orIentatIon of ModuleS
!
6
7
17
16
15
Solar mounting SyStemS05
FLat aNd PitChed rooFs
List of material
Name maT. coDe 3D View recommeNDeD maTerial qualiTy
1
PrIMarY ProfIle 30 10010-01 6 m en aw-6063 t6
TecHNical DaTaMaSS Per Metre: 0,89 kg/m, Square SectIon: 327 mm2, HeIgHt: 30, wIdtH: 40,MoMent of InertIa: Ixx = 32911 mm4, Iyy = 49771 mm4
MoMent of reSIStance: wx = 2765 mm3, wy = 3318 mm3
2
PrIMarY ProfIle 50 10030-01 6 m en aw-6063 t6
TecHNical DaTaMaSS Per Metre: 1,12 kg/m, Square SectIon: 408,01 mm2, HeIgHt: 50, wIdtH: 40, MoMent of InertIa: Ixx = 131362.66 mm4, Iyy = 69889.1 mm4
MoMent of reSIStance: wx = 5851,34 mm3, wy = 3494,45 mm3
3 dIlatatIon ProfIle 30 14010-01 300 mm en aw-6063 t6
4 dIlatatIon ProfIle 50 14030-01 300 mm en aw-6063 t6
6
Pre-aSSeMBled end claMP for Module fIxatIon 30–39 mm
16010 en aw-6063 t6dIn/ISo a2
Pre-aSSeMBled end claMP for Module fIxatIon 40–50 mm
16020 en aw-6063 t6dIn/ISo a2
7
Pre-aSSeMBled MIddle claMP for Module fIxatIon 30–39 mm
16030 en aw-6063 t6dIn/ISo a2
Pre-aSSeMBled MIddle claMP for Module fIxatIon 40–50 mm
16040 en aw-6063 t6dIn/ISo a2
More InforMatIon: www.impolsolar.com
06
8
Pre-aSSeMBled fIxIng wood Screw l = 250
16390 dIn/ISo a2
9 Pre-aSSeMBled adJuStaBle Hook 16441 dIn/ISo a2
10 trIangle 1MHfroM 15° to 25° 16461 en aw-6063 t6
11 trIangle 1MV/2 MHfroM 15° to 25° 16471 en aw-6063 t6
12Pre-aSSeMBled HIgH claMP for ProfIle fIxatIon
16090 en aw-6063 t6
13
connectIng ProfIle for tHe lower Part of trIangle
12031-01 300 mm en aw-6063 t6
14 wIndSHIeld 12060-01 6 m en aw-6063 t6
15PrIMarY ProfIle 30 for traPezoIdal eleMent
10011-01 6 m en aw-6063 t6
16 Self-adHeSIVe ePdM duct 17370 10 m polymer
17 Self drIllIng Screw 05161 dIn/ISo a2
Solar mounting SyStemS07
Building foundation for a greener future
Impol-Montal d.o.o.Partizanska ulica 382310 Slovenska Bistrica Slovenija
phone: +386 (0)2 845 31 00fax: +386 (0)2 818 12 19e-mail: [email protected]: www.impolsolar.com
iso 9001:2008 iso 14001 iso/Ts 16949 oHsas 18001