Industrial Products Division
Taconic manufactures PTFE and silicone rubber coated fiberglass belts that offer exceptional release properties,
outstanding flexibility and superior temperature resistance. Our experienced team will assess your application and
find the right belting solution that offers high performance and maximum value.
Choosing the Right Belting Material
Key factors to consider:
u Temperature Range Our PTFE and silicone rubber coated belts can withstand continuous temperatures of
-100 °F to 500 °F (-73 °C to 260 °C).
u Pliability If the material is to track around pulleys that drive the belt, the diameter of the pulley is critical.
The smaller the roller, the more flexible the belt must be. Taconic’s thinner materials (0.010" and under) are more pliable than heavier coated fabrics.
u Release Qualities The surface finishes of our belts range from a rough, semi-porous finish to a super smooth surface.
u Strength (Tensile/Tear) Tensile and tear strength must be suitable for the load weight carried by the belt, its speed and
tension.
u Fabric Thickness For most conveying applications, .010 - .014" belts are preferred. Lighter, thinner belts (.003 -
.006") are employed in heat sealing applications that require superior flexibility and heat transfer properties, particularly in two-ply applications. Heavier, thicker belts (.015 - .042" are used in high strength/load carrying applications.
Taconic PTFE Fiberglass & Silicone Rubber Coated Belts
FeatureslDurabilitylTemperature ResistancelChemical ResistancelOptimal Release, even for wheat-based food productslDimensional Stability
ApplicationslFood ProcessinglPackaginglScreen PrintinglApparellPlastic Film LaminationlHeat SealinglRubber ProcessinglTextileslCarpet Fabrication
The advantages of PTFE and silicone rubber coatings on fiberglass fabric are as numerous as the
applications for which Taconic’s engineered fabrics are suited. PTFE coated fiberglass is lightweight,
durable and non-flammable as well as chemical and temperature resistant. It provides a nonstick
surface, dimensional stability, weather resistance and is also a good electrical/thermal insulator.
Silicone rubber coated fabric offers a tough coated surface with high flex and slip
coefficient properties. It is an excellent electrical insulator in harsh environments,
offers outstanding release properties as well as chemical and abrasion resistance.
Liquid Silicone Rubber (LSR) fabric offers a non-slip surface
and some grades are approved for direct food contact.
ApplicationslAerospace
lFood Processing
lQuick Service Restaurants
lChemical Processing
lPackaging
lAutomotive
lPVC Welding
lLamination
lComposite Molding
Taconic PTFE & Silicone Rubber Coated Fabrics
PTFE & Silicone Rubber Coated Fabric Typical ValuesWe offer fabric in several grades to cost effectively meet your application requirements.
Description Part NumberOverall
Thickness (inches)
Coated Weight (lbs/sq yd)
Tensile StrengthWarp/Fill (lbs/inch)
Tear Strength Warp/Fill (lbf)
Dielectric Strength
(volts/mil)
Operating Temp. Min/Max °F
FDA Compliant
Standard Widths (inches)
Premium Grade
7039 0.0029 0.26 105 / 75 3.0 / 2.0 1350 -100 / 500 Y 38, 50, 60
7059 0.0049 0.50 170 / 160 5.0 / 4.5 1100 -100 / 500 Y 40, 50, 60
7069-TW-GRN 0.0059 0.58 165 / 155 4.3 / 3.9 1200 -100 / 500 N 42
7069 0.0060 0.59 175 / 160 5.0 / 4.0 1200 -100 / 500 Y 40, 50, 60
7109 0.0095 1.00 325 / 180 12.0 / 8.0 850 -100 / 500 Y 37.5, 50, 60
7119 0.0105 1.09 300 / 175 10.0 / 7.0 700 -100 / 500 Y 44
7149 0.0140 1.44 450 / 275 15.0 / 10.0 550 -100 / 500 Y 37.5
7279 0.0250 1.98 410 / 600 25.0 / 20.0 225 -100 / 500 Y 110Heavy Weight Premium
Smooth A1048 0.0245 2.15 600 / 575 40.0 / 40.0 190 -100 / 500 N 126
Standard Grade
7038 0.0026 0.24 100 / 75 2.0 / 1.5 1350 -100 / 500 Y 38, 50, 60
7048 0.0036 0.35 150 / 75 4.0 / 2.0 1450 -100 / 500 Y 38
7058 0.0045 0.44 160 / 150 5.0 / 5.0 1000 -100 / 500 Y 40, 50, 60
7068 0.0055 0.55 170 / 165 4.5 / 4.0 1200 -100 / 500 Y 40, 50, 60
7108 0.0090 0.91 310 / 175 12.0 / 7.0 810 -100 / 500 Y 37.5, 50, 60
7148 0.0135 1.35 500 / 300 20.0 / 15.0 550 -100 / 500 Y 37
7208 0.0185 1.55 400 / 300 20.0 / 15.0 250 -100 / 500 N 140
7278 0.0245 1.76 425 / 500 50.0 / 55.0 210 -100 / 500 Y 110, 189
Mechanical Grade
7037 0.0025 0.22 95 / 70 3.5 / 2.5 1300 -100 / 500 N 38, 60
7057 0.0040 0.38 160 / 150 5.5 / 5.0 950 -100 / 500 N 40, 50
7107 0.0080 0.80 260 / 160 14.0 / 7.0 650 -100 / 500 N 37.5, 50
7147 0.0115 1.13 450 / 270 20.0 / 15.0 500 -100 / 500 N 37.5
Economy Grade
7036 0.0024 0.17 100 / 80 3.2 / 2.0 1200 -100 / 500 N 38, 40
7056 0.0040 0.34 145 / 140 6.5 / 6.0 900 -100 / 500 N 40
7106 0.0075 0.68 250 / 170 15.0 / 10.0 525 -100 / 500 N 37.5
10-69-128 0.0085 0.70 230 / 185 20.0 / 15.0 420 -100 / 500 N 44
7146 0.0105 0.95 335 / 235 30.0 / 15.0 375 -100 / 500 N 37.5
7226 0.0200 1.31 350 / 300 80.0 / 75.0 165 -100 / 500 Y 126
7356 0.0336 2.07 600 / 450 85.0 / 60.0 140 -100 / 500 N 72
Tac-Black™
7053 0.0046 0.45 170 / 150 4.5 / 3.5 800 -100 / 500 N 38
7063 0.0056 0.55 180 / 170 5.0 / 4.5 550 -100 / 500 N 37.5
7103 0.0090 0.91 300 / 190 15.0 / 10.0 350 -100 / 500 N 37, 50
7143 0.0140 1.36 425 / 325 20.0 / 15.0 180 -100 / 500 N 80
Crease & Tear Resistant
7054 0.0045 0.43 170 / 160 7.0 / 6.5 1000 -100 / 500 N 43, 56
7064 0.0050 0.50 180 / 175 10.5 / 8.5 850 -100 / 500 N 40
A924 0.0100 0.94 300 / 165 15.0 / 10.0 350 -100 / 500 Y 50
7274 0.0245 1.78 475 / 520 70.0 / 90.0 250 -100 / 500 N 72
Pigmented PTFE w/LSR on one side A1075 0.0095 0.79 155 / 145 3.5 / 3.2 N/A -100 / 450 Y 38
Silicone Rubber Coated Fiberglass Fabric
7102W 0.0093 0.63 74 / N/A N/A N/A -100 / 450 N 39
7152 0.0150 1.00 229 / N/A N/A N/A -100 / 450 N 39
7202R 0.0203 1.38 263 / N/A N/A N/A -100 / 450 N 38
7242 0.0220 1.40 285 / N/A N/A N/A -100 / 450 N 39
7231R 0.0230 1.51 350 / N/A N/A N/A -100 / 450 N 37.5
7322 0.0295 1.99 286 / N/A N/A N/A -100 / 450 N 39
7322R 0.0300 1.99 286 / N/A N/A N/A -100 / 450 N 39
7422W 0.0400 2.58 410 / N/A N/A N/A -100 / 450 N 39
Ant
i-Sta
tic
Tac-Black™
7053AS 0.0046 0.45 155 / 150 4.0 / 3.5 N/A -100 / 500 N 40
7063AS 0.0055 0.54 175 / 165 5.5 / 5.0 N/A -100 / 500 N 40
7103AS 0.0090 0.91 285 / 190 12.0 / 8.0 N/A -100 / 500 N 37, 50, 60
7143AS 0.0140 1.34 475 / 350 25.0 / 15.0 N/A -100 / 500 N 60
Kevlar® Black 7305KAS 0.0250 0.54 275 / N/A N/A N/A -100 / 500 N 126
Porous
7025 0.0023 0.12 60 / 55 N/A 1275 -100 / 500 Y 38, 50, 60
7115 0.0125 0.78 220 / 190 45.0 / 60.0 250 -100 / 500 N 104
7255 0.0291 0.82 170 / N/A N/A N/A -100 / 500 N 126
Ope
n M
esh
Glass Tan 7195 0.0200 0.93 300 / N/A N/A N/A -100 / 500 N 72
Kevlar® Gold 7305K 0.0250 0.58 275 / N/A N/A N/A -100 / 500 Y 126
Glass Black 7303 0.0330 0.88 230 / N/A N/A N/A -100 / 500 Y 84, 189
Glass Brown 7308 0.0330 0.88 230 / N/A N/A N/A -100 / 500 Y 84, 189
Glass Tan A970 0.0330 0.88 240 / N/A N/A N/A -100 / 500 Y 84, 189
Kevlar® Glass Brown A1087 0.0390 0.68 600 / N/A N/A N/A -100 / 500 N 42
Kevlar® Glass Gold 7305KG 0.0440 1.27 475 / N/A N/A N/A -100 / 500 N 137
Kevlar® is a registered trademark of E. I. du Pont de Nemours and CompanyThe data herein are averages based on the authoritative testing of several lot numbers. This information is intended for comparison purposes only.
Fabric GradesuPremium Featuring a heavy coating of PTFE that offers optimum release and durability, this grade is
designed for extreme environments where superior release and extended life are critical.
lReusable pan liners for cooking/baking
lLaminate separator sheets
lTortilla and pizza crust belts
lSpecialized heat sealing
lApplications where fabric weave impression is undesirable
uStandard Used in the widest range of applications due to its combination of high performance and
moderate price.
lRelease sheets on heat sealing machines and laminate presses
lNonstick surfaces for paints, adhesives and food products
lGaskets, seals and bearings for chemicals, oils and gases
lThermal insulation for high temperature and chemical resistant applications
lCovers for hot platens, chutes, hoppers and troughs
uMechanical With a medium coating of PTFE, this grade is preferred in applications where economy is
more important than maximum resistance to chemicals and solvents and where increased surface texture is useful.
lChemical resistant laboratory aprons
lProtective curtains for paint spraying and bottle washing, acid protection and food packaging
uEconomy Provides a light coating of PTFE for large volume applications that require cost-efficiency and high performance.
lLeaders for processing paper, plastics, metallic foils and cloth
lSeparator sheets for processing uncured rubber
lManufacturing of abrasive wheels
uPorous Bleeder & Filter Cloth Promotes drying by allowing airflow through the fabric. Available with a wide range of porosity and allows outgassing of volatile products.
lRelease cloth in vacuum molding
lFiltration
lPollution abatement
lStrainers
uOpen Mesh Fabric Used for belts to allow outgassing of volatile products and promote drying since airflow can move through the belt. These belts are ideal for curing and bonding inks, pigments and powders to fabrics and non-woven materials.
Rev. 07-15
800-833-1805www.4taconic.com
ISO 9001 Registered
Fabric Grades uTac-Black™ & Tac-Black™ Anti-Static/Conductive Fabric
Tac-Black™ is a pigmented fabric for use in applications where a natural fabric is not suitable. Tac-Black™ Anti-Static (AS) is provided with carbon loading which offers semi-conductive and anti-static properties.
lRelease sheets
lConveyor belts for fusing machines to bond woven and non-woven fabrics
uCrease & Tear Resistant Offers substantially higher tear strength and flexibility for high speed applications.
lHigh speed packaging belts
lEdge reinforcement for industrial belts in the packaging and plastics industries
uSilicone Rubber Coated Fiberglass Fabric Outstanding dielectric properties, superior release and high abrasion and flex resis-tance make silicone rubber coated fabrics ideal for demanding environments.
lElectrical insulation tapes and gaskets
lHeater covers
lSafety curtains
lConveyor belts for foam manufacturing, shrink tunnels and industrial processes
lRelease and separator sheets for viscous processes in the chemical, rubber, plastic, electrical and aerospace industries
uLiquid Silicone Rubber (LSR) Fabric A chemically inert fabric with excellent release properties that is available with liquid silicone rubber on both sides or with PTFE on one side and liquid silicone rubber on the other.
lDirect food contact applications
lNon-food contact applications
The advantages of PTFE and silicone rubber coatings on fiberglass fabric are as numerous as the
applications for which Taconic’s engineered fabrics are suited. PTFE coated fiberglass is lightweight,
durable and non-flammable as well as chemical and temperature resistant. It provides a nonstick
surface, dimensional stability, weather resistance and is also a good electrical/thermal insulator.
Silicone rubber coated fabric offers a tough coated surface with high flex and slip
coefficient properties. It is an excellent electrical insulator in harsh environments,
offers outstanding release properties as well as chemical and abrasion resistance.
Liquid Silicone Rubber (LSR) fabric offers a non-slip surface
and some grades are approved for direct food contact.
ApplicationslAerospace
lFood Processing
lQuick Service Restaurants
lChemical Processing
lPackaging
lAutomotive
lPVC Welding
lLamination
lComposite Molding
Taconic PTFE & Silicone Rubber Coated Fabrics
PTFE & Silicone Rubber Coated Fabric Typical ValuesWe offer fabric in several grades to cost effectively meet your application requirements.
Description Part NumberOverall
Thickness (inches)
Coated Weight (lbs/sq yd)
Tensile StrengthWarp/Fill (lbs/inch)
Tear Strength Warp/Fill (lbf)
Dielectric Strength
(volts/mil)
Operating Temp. Min/Max °F
FDA Compliant
Standard Widths (inches)
Premium Grade
7039 0.0029 0.26 105 / 75 3.0 / 2.0 1350 -100 / 500 Y 38, 50, 60
7059 0.0049 0.50 170 / 160 5.0 / 4.5 1100 -100 / 500 Y 40, 50, 60
7069-TW-GRN 0.0059 0.58 165 / 155 4.3 / 3.9 1200 -100 / 500 N 42
7069 0.0060 0.59 175 / 160 5.0 / 4.0 1200 -100 / 500 Y 40, 50, 60
7109 0.0095 1.00 325 / 180 12.0 / 8.0 850 -100 / 500 Y 37.5, 50, 60
7119 0.0105 1.09 300 / 175 10.0 / 7.0 700 -100 / 500 Y 44
7149 0.0140 1.44 450 / 275 15.0 / 10.0 550 -100 / 500 Y 37.5
7279 0.0250 1.98 410 / 600 25.0 / 20.0 225 -100 / 500 Y 110Heavy Weight Premium
Smooth A1048 0.0245 2.15 600 / 575 40.0 / 40.0 190 -100 / 500 N 126
Standard Grade
7038 0.0026 0.24 100 / 75 2.0 / 1.5 1350 -100 / 500 Y 38, 50, 60
7048 0.0036 0.35 150 / 75 4.0 / 2.0 1450 -100 / 500 Y 38
7058 0.0045 0.44 160 / 150 5.0 / 5.0 1000 -100 / 500 Y 40, 50, 60
7068 0.0055 0.55 170 / 165 4.5 / 4.0 1200 -100 / 500 Y 40, 50, 60
7108 0.0090 0.91 310 / 175 12.0 / 7.0 810 -100 / 500 Y 37.5, 50, 60
7148 0.0135 1.35 500 / 300 20.0 / 15.0 550 -100 / 500 Y 37
7208 0.0185 1.55 400 / 300 20.0 / 15.0 250 -100 / 500 N 140
7278 0.0245 1.76 425 / 500 50.0 / 55.0 210 -100 / 500 Y 110, 189
Mechanical Grade
7037 0.0025 0.22 95 / 70 3.5 / 2.5 1300 -100 / 500 N 38, 60
7057 0.0040 0.38 160 / 150 5.5 / 5.0 950 -100 / 500 N 40, 50
7107 0.0080 0.80 260 / 160 14.0 / 7.0 650 -100 / 500 N 37.5, 50
7147 0.0115 1.13 450 / 270 20.0 / 15.0 500 -100 / 500 N 37.5
Economy Grade
7036 0.0024 0.17 100 / 80 3.2 / 2.0 1200 -100 / 500 N 38, 40
7056 0.0040 0.34 145 / 140 6.5 / 6.0 900 -100 / 500 N 40
7106 0.0075 0.68 250 / 170 15.0 / 10.0 525 -100 / 500 N 37.5
10-69-128 0.0085 0.70 230 / 185 20.0 / 15.0 420 -100 / 500 N 44
7146 0.0105 0.95 335 / 235 30.0 / 15.0 375 -100 / 500 N 37.5
7226 0.0200 1.31 350 / 300 80.0 / 75.0 165 -100 / 500 Y 126
7356 0.0336 2.07 600 / 450 85.0 / 60.0 140 -100 / 500 N 72
Tac-Black™
7053 0.0046 0.45 170 / 150 4.5 / 3.5 800 -100 / 500 N 38
7063 0.0056 0.55 180 / 170 5.0 / 4.5 550 -100 / 500 N 37.5
7103 0.0090 0.91 300 / 190 15.0 / 10.0 350 -100 / 500 N 37, 50
7143 0.0140 1.36 425 / 325 20.0 / 15.0 180 -100 / 500 N 80
Crease & Tear Resistant
7054 0.0045 0.43 170 / 160 7.0 / 6.5 1000 -100 / 500 N 43, 56
7064 0.0050 0.50 180 / 175 10.5 / 8.5 850 -100 / 500 N 40
A924 0.0100 0.94 300 / 165 15.0 / 10.0 350 -100 / 500 Y 50
7274 0.0245 1.78 475 / 520 70.0 / 90.0 250 -100 / 500 N 72
Pigmented PTFE w/LSR on one side A1075 0.0095 0.79 155 / 145 3.5 / 3.2 N/A -100 / 450 Y 38
Silicone Rubber Coated Fiberglass Fabric
7102W 0.0093 0.63 74 / N/A N/A N/A -100 / 450 N 39
7152 0.0150 1.00 229 / N/A N/A N/A -100 / 450 N 39
7202R 0.0203 1.38 263 / N/A N/A N/A -100 / 450 N 38
7242 0.0220 1.40 285 / N/A N/A N/A -100 / 450 N 39
7231R 0.0230 1.51 350 / N/A N/A N/A -100 / 450 N 37.5
7322 0.0295 1.99 286 / N/A N/A N/A -100 / 450 N 39
7322R 0.0300 1.99 286 / N/A N/A N/A -100 / 450 N 39
7422W 0.0400 2.58 410 / N/A N/A N/A -100 / 450 N 39
Ant
i-Sta
tic
Tac-Black™
7053AS 0.0046 0.45 155 / 150 4.0 / 3.5 N/A -100 / 500 N 40
7063AS 0.0055 0.54 175 / 165 5.5 / 5.0 N/A -100 / 500 N 40
7103AS 0.0090 0.91 285 / 190 12.0 / 8.0 N/A -100 / 500 N 37, 50, 60
7143AS 0.0140 1.34 475 / 350 25.0 / 15.0 N/A -100 / 500 N 60
Kevlar® Black 7305KAS 0.0250 0.54 275 / N/A N/A N/A -100 / 500 N 126
Porous
7025 0.0023 0.12 60 / 55 N/A 1275 -100 / 500 Y 38, 50, 60
7115 0.0125 0.78 220 / 190 45.0 / 60.0 250 -100 / 500 N 104
7255 0.0291 0.82 170 / N/A N/A N/A -100 / 500 N 126
Ope
n M
esh
Glass Tan 7195 0.0200 0.93 300 / N/A N/A N/A -100 / 500 N 72
Kevlar® Gold 7305K 0.0250 0.58 275 / N/A N/A N/A -100 / 500 Y 126
Glass Black 7303 0.0330 0.88 230 / N/A N/A N/A -100 / 500 Y 84, 189
Glass Brown 7308 0.0330 0.88 230 / N/A N/A N/A -100 / 500 Y 84, 189
Glass Tan A970 0.0330 0.88 240 / N/A N/A N/A -100 / 500 Y 84, 189
Kevlar® Glass Brown A1087 0.0390 0.68 600 / N/A N/A N/A -100 / 500 N 42
Kevlar® Glass Gold 7305KG 0.0440 1.27 475 / N/A N/A N/A -100 / 500 N 137
Kevlar® is a registered trademark of E. I. du Pont de Nemours and CompanyThe data herein are averages based on the authoritative testing of several lot numbers. This information is intended for comparison purposes only.
Fabric GradesuPremium Featuring a heavy coating of PTFE that offers optimum release and durability, this grade is
designed for extreme environments where superior release and extended life are critical.
lReusable pan liners for cooking/baking
lLaminate separator sheets
lTortilla and pizza crust belts
lSpecialized heat sealing
lApplications where fabric weave impression is undesirable
uStandard Used in the widest range of applications due to its combination of high performance and
moderate price.
lRelease sheets on heat sealing machines and laminate presses
lNonstick surfaces for paints, adhesives and food products
lGaskets, seals and bearings for chemicals, oils and gases
lThermal insulation for high temperature and chemical resistant applications
lCovers for hot platens, chutes, hoppers and troughs
uMechanical With a medium coating of PTFE, this grade is preferred in applications where economy is
more important than maximum resistance to chemicals and solvents and where increased surface texture is useful.
lChemical resistant laboratory aprons
lProtective curtains for paint spraying and bottle washing, acid protection and food packaging
uEconomy Provides a light coating of PTFE for large volume applications that require cost-efficiency and high performance.
lLeaders for processing paper, plastics, metallic foils and cloth
lSeparator sheets for processing uncured rubber
lManufacturing of abrasive wheels
uPorous Bleeder & Filter Cloth Promotes drying by allowing airflow through the fabric. Available with a wide range of porosity and allows outgassing of volatile products.
lRelease cloth in vacuum molding
lFiltration
lPollution abatement
lStrainers
uOpen Mesh Fabric Used for belts to allow outgassing of volatile products and promote drying since airflow can move through the belt. These belts are ideal for curing and bonding inks, pigments and powders to fabrics and non-woven materials.
Rev. 07-15
800-833-1805www.4taconic.com
ISO 9001 Registered
Fabric Grades uTac-Black™ & Tac-Black™ Anti-Static/Conductive Fabric
Tac-Black™ is a pigmented fabric for use in applications where a natural fabric is not suitable. Tac-Black™ Anti-Static (AS) is provided with carbon loading which offers semi-conductive and anti-static properties.
lRelease sheets
lConveyor belts for fusing machines to bond woven and non-woven fabrics
uCrease & Tear Resistant Offers substantially higher tear strength and flexibility for high speed applications.
lHigh speed packaging belts
lEdge reinforcement for industrial belts in the packaging and plastics industries
uSilicone Rubber Coated Fiberglass Fabric Outstanding dielectric properties, superior release and high abrasion and flex resis-tance make silicone rubber coated fabrics ideal for demanding environments.
lElectrical insulation tapes and gaskets
lHeater covers
lSafety curtains
lConveyor belts for foam manufacturing, shrink tunnels and industrial processes
lRelease and separator sheets for viscous processes in the chemical, rubber, plastic, electrical and aerospace industries
uLiquid Silicone Rubber (LSR) Fabric A chemically inert fabric with excellent release properties that is available with liquid silicone rubber on both sides or with PTFE on one side and liquid silicone rubber on the other.
lDirect food contact applications
lNon-food contact applications
Splices Taconic offers metallic, non-metallic, endless and open splices to accommodate your unique requirements.
u Endless Splices Material ends are
butted together and reinforced with a durable backing strip that provides a smooth working surface.
Alligator Lacing Clipper Lacing
u Non-Metallic Splices When metal lacing cannot be used, a fabric
notched splice, peek lacing, self loop or smart loop splice offers durability and flexibility. A smart loop splice or peek lacing is recommend-ed when maximum airflow is needed.
Fabric Notched Splice
Peek Lacing
Smart Loop Splice
Self Loop Splice
u Metallic Splices Alligator and clipper splices are the most durable and easy to use. Belts can be in-
stalled without taking machinery apart and a cover-flap can be added to these splices to reduce mark-off and heat transfer to your material.
Fabrication Options
Fabric Gradesu Premium These fabrics have a heavy coating of PTFE to provide the easiest release and the highest chemical resistance and electrical
strength. Preferred for applications where fabric weave impression is undesirable and sticky materials are conveyed.
u Standard Offering a smooth surface and excellent nonstick properties, this grade is the most widely used PTFE-Glass belt.
u Mechanical & Economy Light PTFE coating offers economy in applications where increased surface texture is useful.
u Crease & Tear Resistant This grade offers substantially higher tear strength for high speed applications.
u Anti-Static/Conductive Specially treated fabric reduces static build-up.
u Porous/Open Mesh These materials allow outgassing of volatile products and promote drying by allowing airflow through the belt. These belts are ideal for drying, curing and bonding inks, pigments and powders to fabrics and non-woven materials.
u Silicone Rubber Coated Fiberglass These belts offer excellent release properties up to 500 ˚F, superior abrasion, flex and chemical resistance and outstanding dielectric properties in demanding environments. Silicone belts are ideal in applications where high flexibility and a high slip coefficient are required. Available coated on one or two sides in red or white.
Material ends are cut straight or diagonally, over-lapped and heat sealed, providing a very durable seam.
Belt ends are tapered to minimize thickness at the splice area, overlapped and heat sealed.Butt Splice Overlap Splice Scarfed Splice
Edge ReinforcementsTaconic belts can be supplied with strips of heat-sealed film or fabric on one or both edges of your belt. This reinforcement serves a dual purpose: it reduces fraying of belt edges which rub on guiding rollers and it also provides the strongest possible anchor for guiding pins, snaps and grommets. Edge reinforcement is standard for belts with pins or grommets and for open mesh belts. After heat sealing, fabric edge strips can also be sewn for additional strength.
u Heat Sealed PTFE Film Edge PTFE film strips are heat sealed to the top and bottom edges of the belt for a 1/2" or 1" (standard) surface.
The PTFE film is available in 3 mil black or clear and 10 mil tan (1" surface only).
Tracking & Guiding DevicesTaconic offers a variety of options to guide belts on your machine. These devices can be placed on one or both edges of your belts.
0.055"
0.200"0.240"
0.800"
Two-Ply BeltsTwo plies of PTFE coated fiberglass are laminated together with staggered splices to provide a smooth, continuous thickness along the entire belt length. This guarantees a uniform seal in packaging and heat sealing applications. The belts are typically available in widths of ½" to 3".
u Heat Sealed Fabric Edge Six mil fabric is heat sealed to the top and bottom edges of the belt for a 1" (standard) or 2" surface. Fabric
edges are available either tan or black.
u Fabric Edge, Sewn & Sealed For extra reinforcement, our 6 mil heat-sealed fabric edge can also be sewn if desired. This reinforcement
is commonly used on open mesh belting.
u Grommets Nickel plated brass grommets
are offered in three sizes: .1875" I.D., .3125" I.D. and .375" I.D.
u Guide Snaps Nickel plated brass snaps
are available in .37" diameter and .12" deep.
u Silicone Rubber Guides A silicone rubber guide is also available to
assist with accurate tracking.
Taconic offers belts in custom widths to meet your specific requirements.
For added flexibility, belting materials are also supplied open ended for customers
who require this for installation. Hand-held heat sealing irons are available in two sizes
for on-site belt splicing. Please contact customer service for more information.
Description Part Number
Overall Thickness(inches)
Coated Weight
(lbs/sq yd)
Tensile Strength Warp/Fill (lbs/inch )
Tear Strength Warp/Fill
(lbf)
Maximum ContinuousOperating
Temp. °F/°C
Heavy Weight Belting
Premium Smooth
8039 0.0029 0.26 105 / 75 3.0 / 2.0 500 / 260
A952 0.0030 0.29 95 / 70 3.5 / 2.5 500 / 260
TL-7300 0.0070 0.70 200 / 150 13.0 / 11.0 500 / 260
8109 0.0095 1.00 325 / 180 12.0 / 8.0 500 / 260
A1139 0.0098 1.00 300 / 165 12.0 / 9.0 500 / 260
A1048 0.0245 2.15 600 / 575 40.0 / 40.0 500 / 260
Premium Textured 8279 0.0250 1.98 410 / 600 25.0 / 20.0 500 / 260
Standard Smooth
8038 0.0026 0.24 100 / 75 2.0 / 1.5 500 / 260
8108 0.0090 0.91 310 / 175 12.0 / 7.0 500 / 260
8148 0.0135 1.35 500 / 300 20.0 / 15.0 500 / 260
Standard Textured8208 0.0185 1.55 400 / 300 20.0 / 15.0 500 / 260
8278 0.0245 1.76 425 / 500 50.0 / 55.0 500 / 260
Economy Textured8226 0.0200 1.31 350 / 300 80.0 / 75.0 500 / 260
8356 0.0336 2.07 600 / 450 85.0 / 60.0 500 / 260
Porous 8115 0.0125 0.78 220 / 190 45.0 / 60.0 500 / 260
Crease & Tear Resistant Smooth
8054 0.0045 0.43 170 / 160 7.0 / 6.5 500 / 260
8064 0.0050 0.50 180 / 175 10.5 / 8.5 500 / 260
Crease & Tear Resistant Textured 8274 0.0245 1.78 475 / 520 70.0 / 90.0 500 / 260
Tac-Black™8103 0.0090 0.91 300 / 190 15.0 / 10.0 500 / 260
8143 0.0140 1.36 425 / 325 20.0 / 15.0 500 / 260
Tac-Black™ Anti-Static8103AS 0.0090 0.91 285 / 190 12.0 / 8.0 500 / 260
8143AS 0.0140 1.34 475 / 350 25.0 / 15.0 500 / 260
Silicone Rubber Coated8242 0.0220 1.40 285 / N/A N/A 500 / 260
8231R 0.0230 1.51 350 / N/A N/A 500 / 260
Description Part Number
Overall Thickness (inches)
Coated Weight
(lbs/sq yd)
Tensile Strength
Warp (lbs/inch)
Maximum Continuous Operating
Temp. °F/°C
Open Mesh Belting - PTFE/GlassGlass Tan 8195 0.0200 0.93 300 500 / 260
Glass Black 8303 0.0330 0.88 230 500 / 260
Glass Brown 8308 0.0330 0.88 230 500 / 260
Glass Tan A970 0.0330 0.88 240 500 / 260
Open Mesh Belting - PTFE/Kevlar® & Kevlar®/Glass
Kevlar® Gold 8305K 0.0250 0.58 275 500 / 260Kevlar® Black Anti-Static 8305KAS 0.0250 0.54 275 500 / 260
Kevlar®/Glass Brown A1087 0.0390 0.68 600 500 / 260
Kevlar®/Glass Gold 8305KG 0.0440 1.27 475 500 / 260
Ordering Your Taconic Belt Please have the following information available:
u Dimensions of belt (width and length)
u Desired splice, edge reinforcement and tracking devices, where needed
u Drive pulley recommendations: Minimum drive pulley diameter is 6" for heavy weight belting and 3" for all other materials
u Special instructions concerning belt fabrication (in cases of complex fabrication, a print may be requested)
Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company
518-658-3202 / 1-800-833-1805www.4taconic.com
ISO 9001 Registered
Rev. 07-15
The data herein are averages based on the authoritative testing of several lot numbers. This information is intended for comparison purposes only.
Rev. 07-15