Mullis 1
Intermolecular forces: Generalizing properties
Low boiling point = particles are more likely to leave liquid solution
Weaker IM forces = lower boiling point Lower boiling point = more vapor = higher vapor
pressure High boiling point = slow evaporation If IM forces are the same, look at formula weight.
Heavier molecules have higher boiling points. Strength of IM forces: Hydrogen bond>dipole-dipole>London dispersion
Mullis 2
Intermolecular ForcesInteracting molecules
or ions
Polar molecules? Ions involved? Are polar molecules and ions both present?
Are H atoms bonded toN,O or F atoms?
No Yes
Yes
London ForcesonlyEx. Ar(l), I2(s)
No
Dipole-Dipole
Ex. H2S
No
Hydrogen BondingEx. NH3, H2O
Yes
Ion-dipole ForcesEx. KBr in H2O
Yes
Ionic bondingEx. NaCl
No
Mullis 3
Water’s Properties
Hexagonal crystal shape Molecule is polar. Hydrogen bonding
Ice floats. Expands during freezing until -4.0 º C. Solid form is less dense than liquid Surface tension:
Water “beads” on smooth surfaces. Insects walk on water surfaces.
Mullis 4
Surface tension Force that pulls adjacent parts of a liquid
surface together. The higher the attractive forces between
particles in the liquid, the higher the surface tension.
Hydrogen bonds make water have higher surface tension than most liquids.
Water droplet
Soap
Mullis 5
Phases of matter: ComparisonProperty Solid Liquid Gas
Particles Closely packed
High density(But…Water is different!)
More densely packed than in gas
Most compressible-least densely packed
Particle movement
Vibrate weakly around fixed positions
Lowest kinetic energy
Can change positions with other particles
Can change positions with other particles
Highest kinetic energy
Intermolecular forces
Most effective (strongest)
Stronger than in gases
Least effective (weakest)
Shape and volume
Both definite Definite volume only
No definite shape or volume
Mullis 6
Solids
Crystalline solids Particles are arranged in an orderly, geometric, repeating
pattern. Examples: Emerald, diamond, calcite
Amorphous solids: (Without shape) Particles are arranged randomly. Examples: Glass, plastic
Network solids Covalent bonds, usually single element arranged in orderly
pattern Examples: Diamond, graphite
Mullis 7
Bonding in Solids Molecular solids
Most are liquids or gases at room temp. Ex. H2O, Ar
Covalent Network solidsCovalent Network solids Covalent bonds are stronger than IM forces, so substances
have relatively high melting points and are harder than molecular ones.
Ex: quartz, diamond, graphite, SiO2
Ionic solids Ionic bonds are the strongest of all Strength of bond depends on charge: Higher charges =
higher melting point. Crystal structures: Examples
Face-centered cubic, body-centered cubic, hexagonal close-packed structures.
Metallic Solids (metallic bonds)
Mullis 8
CrystalsImages created by Daniel Mayer or Wikimedia Commons and licensed under terms of the GNU FDL.
Can examine structure using X-ray diffraction Uses Bragg’s Law to determine
distance between planes of atoms. Computer instrumentation is used to translate wave functions into photographic images.
Bragg’s Law: nBragg’s Law: nλλ = 2dsin = 2dsinΘΘ n is an integer (1), λ is wavelength, d is
distance between atoms, Θ angle of incidence
3D link:http://www.le.ac.uk/eg/spg3/atomic.html
cbc
cfc
hexagonal
Mullis 9
Silicon Doping(N-type is more conductive when voltage is applied.)
O:O:O:O: O:O:O:O: O:O:O:O:
O:O:O:O: O:B.O:O: O:P:O:O:
Silicon (4 e-) P-type N-type
semiconductor hole created extra e- in lattice
p = positive n= negative
To customize
conductive properties, add a dopant such as B (p-type), As or P (n-type)
.. .. .. .. .. .. .. .. .. … .. ..
.. .. .. .. .. .. .. .. .. .. .. ..
Mullis 10
Allotropes (different forms of same element)
Carbon (C) Diamond Graphite (pencil “lead”) Charcoal
Sulfur (S) Rhombic (puckered ring)= S8
Phosphorous (P) White phosphorous, P4 is most reactive,
tetrahedral Red phosphorous is more stable.
Mullis 11
Allotrope: Two or more forms of the same element that have distinctly different physical or chemical properties.
Fullerenes include C60, buckminsterfullerene, a hollow sphere resembling a soccer ball.
Graphite is a black solid that feels soft and “greasy” to the touch. Planar sheets of molecules can slip by one another easily. It is used as a lubricant and leaves black marks if rubbed on a lighter-colored surface. It conducts electricity. Selling price: < $0.01/gram.
Diamond is one of the hardest substances known (Mohs hardness = 10). Its hardness is due to rigid networks of tetrahedrons, carbon atoms covalently bound. It does not conduct electricity. Selling price = $50.00 - $20,000.00/gram.
Mullis 12
Material modification Pencil “lead” is softened by adding clay to graphite. Gold jewelry is strengthened by adding copper or other
metal. 14 karat gold means that 14/24’s of the material is Au. (The relative proportion of gold originated with a medieval coin called a mark; a mark weighed 24 karats.)
Ceramics: Developed from conventional clay (Si, O, Al) and the addition of other minerals to improve strength, melting point and brittleness. Ceramics can often get much hotter before they melt than metals.
Plastics: Synthetic polymers primarily from carbon. Disadvantage is that most are made from nonrenewable petroleum resources.
Mullis 13
Changing states
Equilibrium: When there is no net change in a system.
Dynamic equilibrium: When a vapor is in equilibrium with its liquid
as one molecule leaves the liquid to become a vapor, another molecule leaves the vapor to become a liquid. In other words, an equal number of molecules will be found moving in both directions.
Mullis 14
Boiling Point
Vapor pressure: Pressure exerted by a vapor = Pressure of the liquid at given temperature
Liquid boils when its vapor pressure equals pressure of the atmosphere.
Boiling is the conversion of a liquid to vapor within the liquid as well as at its surface.
Boiling point is the temperature at which the equilibrium vapor pressure of the liquid equals the atmospheric pressure.
Volatile liquids are liquids that evaporate readily.
Mullis 15
Boiling Point, cont.
High elevation: Low atmospheric pressure Low atmospheric pressure = lower boiling
point High pressure in pressure cooker = increased
boiling point, faster cooking If pressure above liquid increases, the liquid
temperature rises until it matches the new pressure and boils again.
Mullis 16
Separation by Distillation
Distillation is the separation of liquid substances according to their different boiling points.
As a liquid mixture is heated, the substance with the lower boiling point will vaporize first.
Distillate: Condensed liquid substance
Mullis 17
Kinetic Energy and Equilibrium Vapor Pressure
In the beginning: # particles condensing to liquid phase =
# particles evaporating to gas phase Increase temp Increase kinetic energy Now, more molecules have enough energy to
leave the liquid. More vapor molecules = higher vapor pressure Equilibrium will soon be established, but at a
higher vapor pressure.
Mullis 18
Heat of Vaporization
Amount of heat necessary to boil (or condense) 1.00 mole of a substance at its boiling point
***1) 1.00 mole of a substance***2) There is no temperature change
The molar heat of vaporization (ΔHvap ) for water is 40.7 kJ/mol. It comes from a table.
q = ΔHvap (mass / molar mass) (q = ΔHvapn) q is total amount of heat involved.
Mullis 19
Heat of Vaporization
Vapor pressure increases nonlinearly for liquids. Mathematically, the relationship is
ln(Pvap) = -ΔHvap (1/T) +C
RWhere C = constant characteristic of a given liquid.
m = slope = -ΔHvap and x = 1/T and b = intercept = C
R
Mullis 20
Heat of Fusion aka standard enthalpy change of fusion Amount of thermal energy absorbed or lost for 1 gram of a
substance to change states from a solid to a liquid or vice versa. Temperature at which it occurs is called the melting point. Temperature falls if thermal energy is removed from a liquid or
solid At the transition point between solid and liquid (melting point),
EXTRA energy is required to go from liquid to solid and increase order. For molecules to maintain the order of a solid, extra heat must be withdrawn.
In the other direction, to create the disorder from the solid crystal to liquid, extra heat must be added.
The molar heat of fusion for water is 6.02 kJ/mol. q = ΔHvap (mass / molar mass)
Mullis 21
Phase DiagramA phase diagram is a graph of pressure vs. temperature that shows the conditions under which phases of matter exist.
Critical temp (Tc): Above this, the substance cannot exist in the liquid state.
Mullis 22
Phase Diagrams: Density
Negative liquid/solid slope shows density of solid is LESS than
liquid (like H2O). See previous slide. Most substances will have a positive slope of this line since most solids are more
dense than the liquid:
http://wine1.sb.fsu.edu/chm1045/notes/Forces/Phase/Forces06.htm
Mullis 23
Four major "points" on a phase diagram
1. Triple point, TP - All three phases can exist in equilibrium at this temperature and pressure. (The solid-liquid line and the liquid-vapor line meet.)
2. Normal boiling point, Tb - The temperature at which the vapor pressure of a liquid is equal to standard atmospheric pressure. (Standard atmospheric pressure line crosses the liquid-vapor line.)
3. Normal melting point, Tm - The temperature at which the vapor pressure of the solid and the vapor pressure of the liquid are equal.
(Standard atmospheric pressure line crosses the solid-liquid line.)
4. Critical temperature, Tc - The temperature above which no amount of pressure will liquefy a vapor.
(The liquid-vapor line becomes vertical.)