Download - International standards
1 | P a g e
International Organization for Standardization
The International Organization for Standardization (French: Organisation internationale de normalisation, Russian:Международная организация по стандартизации, tr. Myezhdunarodnaya organizatsiya po standartizatsii), known as ISO, is an international standard-setting body composed of representatives from various national standards organizations. Founded on 23 February 1947, the organization promotes worldwide proprietary, industrial and commercial standards. It is headquartered in Geneva, Switzerland. It was one of the first organizations granted general consultative status with the United Nations Economic and Social Council. Contents 1. Name and abbreviation 2. History 3. Structure
3.1. IEC joint committees 3.1.1.1. ISO/IEC JTC 1 - Information technology 3.1.1.2. ISO/IEC JTC 2 - Joint Project Committee - Energy
efficiency and renewable energy sources - Common terminology
4. Members 5. International Standards and other publications 6. List Of ISO Standards
1. Name and abbreviation
The three official languages of the ISO are English, French and Russian.[ The organization's name would have different acronyms in different languages – e.g. IOS is English, OIN in French – so it adopted the short name ISO, based on the Greek word isos (ἴσος, meaning equal). The name ISO and the logo are both registered trademarks, and their use is restricted. 2. History
The organization today known as ISO began in 1926 as the International Federation of the National Standardizing Associations (ISA). It was suspended in 1942[citation
needed] during World War II, but after the war ISA was approached by the recently formed United Nations Standards Coordinating Committee (UNSCC) with a proposal to form a new global standards body. In October 1946, ISA and UNSCC delegates from 25 countries met in London and agreed to join forces to create the new International Organization for Standardization; the new organization officially began operations in February 1947. 3. Structure
ISO is a voluntary organization whose members are recognized authorities on standards, each one representing one country. Members meet annually at a General Assembly to discuss ISO's strategic objectives. The organization is coordinated by a Central Secretariat based in Geneva. A Council with a rotating membership of 20 member bodies provides guidance and governance, including setting the Central Secretariat's annual budget. The Technical Management Board is responsible for over 250 technical committees, who develop the ISO standards
3.1. IEC joint committees ISO has formed joint committees with the International Electrotechnical Commission (IEC) to develop standards and terminology in the areas of electrical, electronic and related technologies.
3.1.1. ISO/IEC JTC 1 - Information technology Main article: ISO/IEC JTC 1 ISO/IEC Joint Technical Committee 1 (JTC 1) was created in 1987 to "Develop, maintain, promote and facilitate IT standards".
3.1.2. ISO/IEC JTC 2 - Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology ISO/IEC Joint Technical Committee 2 (JTC 2) was created in 2009 for the purpose of "Standardization in the field of Energy efficiency and renewable energy sources".
International Organization for Standardization Organisation internationale de normalisation Международная организация по стандартизации[1]
Logo of the ISO
Formation 23 February 1947
Type Non-governmental organization
Purpose/focus International standardization
Headquarters Geneva, Switzerland
Membership 163 members
Official languages English, French and Russian
Website iso.org
Memorial plaque of founding ISA in Prague
2 | P a g e
4. Members
ISO has 164 national members, out of the 206 total countries in the world. ISO has three membership categories:
Member bodies are national bodies considered the most representative standards body in each country. These are the only members of ISO that have voting rights.
Correspondent members are countries that do not have their own standards organization. These members are informed about ISO's work, but do not participate in standards promulgation.
Subscriber members are countries with small economies. They pay reduced membership fees, but can follow the development of standards.
Participating members are called "P" members, as opposed to observing members, who are called "O" members. 5. International Standards and other publications
ISO's main products are international standards. ISO also publishes technical reports, technical specifications, publicly available specifications, technical corrigenda, and guides.[16][17] International standards are designated with the format ISO[/IEC] [/ASTM] [IS] nnnnn[-p]:[yyyy] Title, where nnnnn is the number of the standard, p is an optional part number, yyyy is the year published, and Title describes the subject. IEC for International Electrotechnical Commission is included if the standard results from the work of ISO/IEC JTC1 (the ISO/IEC Joint Technical Committee). ASTM (American Society for Testing and Materials) is used for standards developed in cooperation with ASTM International. The date and IS are not used for an incomplete or unpublished standard and may under some circumstances be left off the title of a published work. Technical reports are issued when a technical committee or subcommittee has collected data of a different kind from that normally published as an International Standard.[16] such as references and explanations. The naming conventions for these are the same as for standards, except TR prepended instead of IS in the report's name. Examples:
ISO/IEC TR 17799:2000 Code of Practice for Information Security Management
ISO/TR 19033:2000 Technical product documentation — Metadata for construction documentation Technical specifications can be produced when "the subject in question is still under development or where for any other reason there is the future but not immediate possibility of an agreement to publish an International Standard". Publicly Available Specifications may be "an intermediate specification, published prior to the development of a full International Standard, or, in IEC may be a 'dual logo' publication published in collaboration with an external organization".[16] Both are named by convention similar to Technical Reports, for example:
ISO/TS 16952-1:2006 Technical product documentation — Reference designation system — Part 1: General application rules
ISO/PAS 11154:2006 Road vehicles — Roof load carriers ISO sometimes issues technical corrigenda. Corrigenda (plural of corrigendum) are amendments to existing standards because of minor technical flaws, usability improvements, or limited applicability extensions. Generally, these are issued with the expectation that the affected standard will be updated or withdrawn at its next scheduled review.[16] ISO Guides are meta-standards covering "matters related to international standardization".[16] They are named in the format "ISO[/IEC] Guide N:yyyy: Title", for example:
ISO/IEC Guide 2:2004 Standardization and related activities — General vocabulary
ISO/IEC Guide 65:1996 General requirements for bodies operating product certification 6. List Of ISO Standards
ISO 1 – ISO 99
ISO 1:2002 Geometrical Product Specifications (GPS) – Standard reference temperature for geometrical product specification and verification
ISO 2:1973 Textiles – Designation of the direction of twist in yarns and related products
ISO 3:1973 Preferred numbers – Series of preferred numbers
ISO 4:1997 Information and documentation – Rules for the abbreviation of title words and titles of publications
ISO 5 Photography and graphic technology – Density measurements
ISO 5-1:2009 Geometry and functional notation
ISO 5-2:2009 Geometric conditions for transmittance density
ISO 5-3:2009 Spectral conditions
ISO 5-4:2009 Geometric conditions for reflection density
ISO 6:1993 Photography – Black-and-white pictorial still camera negative film/process systems – Determination of ISO speed
ISO 7 Pipe threads where pressure-tight joints are made on the threads
ISO 7-1:1994 Dimensions, tolerances and designation
ISO 7-2:2000 Verification by means of limit gauges
ISO 8:1977 Documentation – Presentation of periodicals
A map of standards bodies who are ISO members Key: members correspondent members subscriber members other places with an ISO 3166-1 code who aren't members of ISO
3 | P a g e
ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages
ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins
ISO 12:1987 Aerospace – Pipelines – Identification
ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification
ISO 15:2011 Radial bearings -- Boundary dimensions, general plan
ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch)
ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
ISO 18:1981 Documentation – Contents list of periodicals
ISO 21:1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains
ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances
ISO 23:1993 Cinematography -- Camera usage of 35 mm motion-picture film -- Specifications
ISO 25:1994 Cinematography -- Camera usage of 16 mm motion-picture film -- Specifications
ISO 26:1993 Cinematography -- Projector usage of 16 mm motion-picture films for direct front projection -- Specifications
ISO 28:1976 Cinematography -- Camera usage of 8 mm Type R motion-picture film -- Specifications
ISO 29:1980 Cinematography -- Projector usage of 8 mm Type R silent motion-picture film for direct front projection -- Specifications [Withdrawn without replacement]
ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]
ISO 32:1977 Gas cylinders for medical use -- Marking for identification of content
ISO 34
ISO 34-1:2010 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces
ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces
ISO 35:2004 Natural rubber latex concentrate -- Determination of mechanical stability
ISO 36:2011 Rubber, vulcanized or thermoplastic -- Determination of adhesion to textile fabrics
ISO 37:2011 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 41:1980 Shipbuilding -- Inland vessels -- Covers for deck openings for pumps [withdrawn without replacement]
ISO 43:1976 Aircraft -- Jacking pads
ISO 44:1975 Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions of operation
ISO 45:1990 Aircraft -- Pressure refuelling connections
ISO 46:1973 Aircraft -- Fuel nozzle grounding plugs and sockets
ISO 48:2010 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
ISO 50:1977 Metal pipes -- Steel sockets screwed according to ISO 7 [Withdrawn without replacement]
ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile
ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering -- Modules
ISO 55:1977 Seedlac -- Specification [Withdrawn without replacement]
ISO 57:1975 Bleached lac -- Specification [Withdrawn without replacement]
ISO 60:1977 Plastics -- Determination of apparent density of material that can be poured from a specified funnel
ISO 61:1976 Plastics -- Determination of apparent density of moulding material that cannot be poured from a specified funnel
ISO 62:2008 Plastics -- Determination of water absorption
ISO 63:1975 Flat transmission belts -- Lengths [Withdrawn: Replaced with ISO 22]
ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
ISO 67:1981 Muscovite mica blocks, thins and films -- Grading by size [Withdrawn without replacement]
ISO 68 ISO general-purpose screw threads – Basic profile
ISO 68-1:1998 Metric screw threads
ISO 68-2:1998 Inch screw threads
ISO 69:1998 Cinematography -- 16 mm motion-picture and magnetic film -- Cutting and perforating dimensions
ISO 70:1981 Cinematography -- 35 mm negative photographic sound record on 35 mm motion-picture film -- Position and maximum width dimensions
ISO 71:1977 Cinematography -- 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film -- Positions and dimensions
ISO 74:1976 Cinematography -- Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film -- Positions and dimensions
ISO 75 Plastics -- Determination of temperature of deflection under load
ISO 75-1:2013 Plastics -- Determination of temperature of deflection under load -- Part 1: General test method
ISO 75-2:2013 Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
ISO 75-3:2004 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 76:2006 Rolling bearings -- Static load ratings
ISO 78 Chemistry — Layouts for standards
ISO 78-2:1999 Chemistry -- Layouts for standards -- Part 2: Methods of chemical analysis
4 | P a g e
ISO 78-3:1983 Chemistry -- Layouts for standards -- Part 3: Standard for molecular absorption spectrometry
ISO 78-4:1983 Layouts for standards -- Part 4: Standard for atomic absorption spectrometric analysis
ISO 82:1974 Steel -- Tensile testing [Withdrawn: replaced with ISO 6892-1]
ISO 83:1976 Steel -- Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]
ISO 86:1974 Steel -- Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
ISO 89:1974 Steel -- Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
ISO 90 Light gauge metal containers -- Definitions and determination of dimensions and capacities
ISO 90-1:1997 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 1: Open-top cans
ISO 90-2:1997 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 2: General use containers
ISO 90-3:2000 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 3: Aerosol cans
ISO 91 Petroleum measurement tables
ISO 91-1:1992 Petroleum measurement tables -- Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F
ISO 91-2:1991 Petroleum measurement tables -- Part 2: Tables based on a reference temperature of 20 degrees C
ISO 92:1976 Textile machinery and accessories -- Spinning machinery -- Definition of side (left or right)
ISO 93 Textile machinery and accessories -- Cylindrical sliver cans
ISO 93-1:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 1: Main dimensions
ISO 93-2:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 2: Spring bottoms
ISO 94:1982 Textile machinery and accessories -- Spindle gauges for ring-spinning and ring-doubling frames
ISO 96 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames
ISO 96-1:2009 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames -- Part 1: Flange rings T and SF and their travellers
ISO 96-2:2009 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames -- Part 2: HZ- and J-rings and their travellers
ISO 97:1975 Textile machinery and accessories -- Rings for spinning, doubling and twisting for ear-shaped travellers
ISO 98:2001 Textile machinery and accessories -- Spinning preparatory and spinning machinery -- Main dimensions of coverings for top rollers
ISO 100 – ISO 199
ISO 100:1984 Pulleys for flat transmission belts -- Crowns [Withdrawn: replaced with ISO 22]
ISO 102:1990 Aircraft -- Gravity filling orifices
ISO 104:2002 Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan
ISO 105 Textiles — Tests for colour fastness
ISO 105-A01:2010 Part A01: General principles of testing
ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
ISO 105-A03:1993 Part A03: Grey scale for assessing staining
ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight
ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure
ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
ISO 105-B10:2011 Part B10: Artificial weathering -- Exposure to filtered xenon-arc radiation
ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering -- Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
5 | P a g e
ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents
ISO 105-E01:2013 Part E01: Colour fastness to water
ISO 105-E02:2013 Part E02: Colour fastness to sea water
ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
ISO 105-E04:2013 Part E04: Colour fastness to perspiration
ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
ISO 105-E08:1994 Part E08: Colour fastness to hot water
ISO 105-E09:2010 Part E09: Colour fastness to potting
ISO 105-E10:1994 Part E10: Colour fastness to decatizing
ISO 105-E11:1994 Part E11: Colour fastness to steaming
ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
ISO 105-G01:1993 Part G01: Colour
fastness to nitrogen oxides
ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
ISO 105-J03:2009 Part J03: Calculation of colour differences
ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
ISO 105-N05:1993 Part N05: Colour fastness to stoving
ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
ISO 105-X08:1994 Part X08: Colour fastness to degumming
ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
ISO 105-X12:2001 Part X12: Colour fastness to rubbing
ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
ISO 105-X16:2001 Part X16: Colour fastness to rubbing -- Small areas
ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
6 | P a g e
ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
ISO 108:1976 Textile machinery and accessories -- Weaving looms -- Definition of left and right sides
ISO 109:1982 Textile machinery -- Working widths of weaving machines
ISO 110:1978 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement]
ISO 111:1978 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
ISO 112:1983 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
ISO 113:2010 Rolling bearings -- Plummer block housings -- Boundary dimensions
ISO 114:1980 99.8 Unalloyed magnesium ingots -- Chemical composition [Withdrawn: Replaced by ISO 8287]
ISO 115:2003 Unalloyed aluminium ingots for remelting -- Classification and composition
ISO 119:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free phenols -- Iodometric method
ISO 120:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Colorimetric comparison method
ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings -- Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]
ISO 123:2001 Rubber latex -- Sampling
ISO 124:2011 Latex, rubber -- Determination of total solids content
ISO 125:2011 Natural rubber latex concentrate -- Determination of alkalinity
ISO 126:2005 Natural rubber latex concentrate -- Determination of dry rubber content
ISO 127:2012 Rubber, natural latex concentrate -- Determination of KOH number
ISO 128
ISO 128-1:2003 Technical drawings -- General principles of presentation -- Part 1: Introduction and index
ISO 128-15:2013 Technical product documentation (TPD) -- General principles of presentation -- Part 15: Presentation of shipbuilding drawings
ISO 128-20:1996 Technical drawings -- General principles of presentation -- Part 20: Basic conventions for lines
ISO 128-21:1997 Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systems
ISO 128-22:1999 Technical drawings -- General principles of presentation -- Part 22: Basic conventions and applications for leader lines and reference lines
ISO 128-23:1999 Technical drawings -- General principles of presentation -- Part 23: Lines on construction drawings
ISO 128-24:1999 Technical drawings -- General principles of presentation -- Part 24: Lines on mechanical engineering drawings
ISO 128-25:1999 Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings
ISO 128-30:2001 Technical drawings -- General principles of presentation -- Part 30: Basic conventions for views
ISO 128-34:2001 Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings
ISO 128-40:2001 Technical drawings -- General principles of presentation -- Part 40: Basic conventions for cuts and sections
ISO 128-44:2001 Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings
ISO 128-50:2001 Technical drawings -- General principles of presentation -- Part 50: Basic conventions for representing areas on cuts and sections
ISO/TS 128-71:2010 Technical product documentation (TPD) -- General principles of presentation -- Part 71: Simplified representation for mechanical engineering drawings
ISO 129
ISO 129-1:2004 Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles
ISO 129-4:2013 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
ISO 131:1979 Acoustics -- Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
ISO 132:2011 Rubber, vulcanized or thermoplastic -- Determination of flex cracking and crack growth (De Mattia)
ISO 133:1983 Rubber, vulcanized -- Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]
ISO 136:1972 Steel -- Simple torsion testing of wire [Withdrawn replaced by ISO 7800]
7 | P a g e
ISO 137:1975 Wool -- Determination of fibre diameter -- Projection microscope method
ISO 139:2005 Textiles -- Standard atmospheres for conditioning and testing
ISO 140 Acoustics -- Measurement of sound insulation in buildings and of building elements
ISO 140-2:1991 Part 2: Determination, verification and application of precision data
ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms
ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades
ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors
ISO 140-14:2004 Part 14: Guidelines for special situations in the field
ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements
ISO 141:1976 Textile machinery and accessories -- Pirn winders and cross winders -- Definition of left and right sides
ISO 142:1976 Textile machinery and accessories -- Weaving preparatory machines -- Definition of left and right sides
ISO 143:1977 Textile machinery and accessories -- Weft pirns for automatic looms [Withdrawn without replacement]
ISO 144:1973 Steel -- Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
ISO 146:1984 Metallic materials -- Hardness test -- Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]
ISO 146-2:1993 Metallic materials -- Verification of Vickers hardness testing machines -- Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]
ISO 148 Metallic materials -- Charpy pendulum impact test
ISO 148-1:2009 Part 1: Test method
ISO 148-2:2008 Part 2: Verification of testing machines
ISO 148-3:2008 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test
ISO 155:1998 Belt drives -- Pulleys -- Limiting values for adjustment of centres
ISO 156:1982 Metallic materials -- Hardness test -- Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2]
ISO 157:1996 Coal -- Determination of forms of sulfur
ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
ISO 161 Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures
ISO 161-1:1996 Part 1: Metric series
ISO 161-2:1996 Part 2: Inch-based series
ISO 162:1985 Cinematography -- Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture -- Positions and width dimensions
ISO 171:1980 Plastics -- Determination of bulk factor of moulding materials
ISO 172:1978 Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia
ISO 174:1974 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2]
ISO 200 – ISO 999
ISO 216:2007 Writing paper and certain classes of printed matter – Trimmed sizes – A and B series, and indication of machine direction
ISO 226:2003 Acoustics – Normal equal-loudness-level contours
ISO 228 Pipe threads where pressure-tight joints are not made on the threads
ISO 228-1:2000 Dimensions, tolerances and designation
ISO 228-2:1987 Verification by means of limit gauges
ISO 233 Information and documentation – Transliteration of Arabic characters into Latin characters[Note 3]
ISO 233-2:1993 Arabic language – Simplified transliteration
ISO 233-3:1999 Persian language – Simplified transliteration
ISO 259 Information and documentation – Transliteration of Hebrew characters into Latin characters[Note 3]
ISO 259-2:1994 Simplified transliteration
ISO 261 ISO general purpose metric screw threads – General plan
ISO 262 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
ISO 361 Basic ionizing radiation symbol
ISO 500 Agricultural tractors – Rear-mounted power take-off types 1, 2 and 3
ISO 518:2006 Photography – Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units – Specification
ISO 519:1992 Photography – Hand-held cameras – Flash-connector dimensions
ISO 639 Codes for the representation of names of languages
ISO 639-1 Alpha-2 code
ISO 639-2 Alpha-3 code
ISO 639-3 Alpha-3 code for comprehensive coverage of languages
8 | P a g e
ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application guidelines
ISO 639-5 Alpha-3 code for language families and groups
ISO 639-6 Alpha-4 code for comprehensive coverage of language variants
ISO/IEC 646 Information technology – ISO 7-bit coded character set for information interchange
ISO 657 Hot-rolled steel sections
ISO 668 Series 1 freight containers – Classification, dimensions and ratings
ISO 690 Information and documentation – Guidelines for bibliographic references and citations to information resources
ISO 704 Terminology work – Principles and methods
ISO 732 Photography – 120-size and 220-size films – Dimensions
ISO 764 Horology – Magnetic resistant watches
ISO 760:1978 Determination of water - Karl Fischer method (General method)
ISO 787 General methods of test for pigments and extenders
ISO 787-9:1981 Determination of pH value of an aqueous suspension
ISO 838 Paper – Holes for general filing purposes – Specifications
ISO 843:1997 Information and documentation – Conversion of Greek characters into Latin characters
ISO 860 Terminology work – Harmonization of concepts and terms
ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3]
ISO 898-1 Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread
ISO 898-2 Nuts with specified proof load values – Coarse thread
ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses
ISO 898-6 Nuts with specified proof load values – Fine pitch thread
ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
ISO 965 ISO general purpose metric screw threads – Tolerances
ISO 965-1 Principles and basic data
ISO 965-2 Limits of sizes for general purpose external and internal screw threads – Medium quality
ISO 965-3 Deviations for constructional screw threads
ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO 999 Information and documentation – Guidelines for the content, organization, and presentation of indexes ISO 1000 – ISO 4999
ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17]
ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
ISO 1007 Photography – 135-size film and magazine – Specifications
ISO 1101 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
ISO 1222 Photography – Tripod connections
ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
ISO/IEC 1539 Information technology – Programming languages – Fortran
ISO 1629 Rubber and latices – Nomenclature
ISO 1663 Rigid cellular plastics – Determination of water vapour transmission properties
ISO 1745 Information processing – Basic mode control procedures for data communication systems
ISO 1750 Pesticides and other agrochemicals – Common names
ISO 1928 Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
ISO/IEC 2022 Information technology – Character code structure and extension techniques
ISO 2108 Information and documentation – International standard book number (ISBN)
ISO 2145 Documentation – Numbering of divisions and subdivisions in written documents
ISO 2162 Technical product documentation – Springs
ISO 2162-1 Simplified representation
ISO 2162-2 Presentation of data for cylindrical helical compression springs
ISO 2171 Cereals, pulses and by-products – Determination of ash yield by incineration
ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
ISO 2533 Standard Atmosphere
ISO 2709 Information and documentation – Format for information exchange
ISO 2768 General tolerances
ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications
ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
ISO 2852 Stainless steel clamp pipe couplings for the food industry
9 | P a g e
ISO 3002 Basic quantities in cutting and grinding
ISO 3082 Iron ores – Sampling and sample preparation procedures
ISO 3098 Technical product documentation – Lettering
ISO 3103 Tea – Preparation of liquor for use in sensory tests
ISO 3166 Codes for the representation of names of countries and their subdivisions
ISO 3166-1 Country codes
ISO 3166-2 Country subdivision code
ISO 3166-3 Code for formerly used names of countries
ISO 3297 Information and documentation – International standard serial number (ISSN)
ISO 3394 Dimensions of rigid rectangular packages – Transport packages
ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
ISO 3536 Road vehicles – Safety glazing materials – Vocabulary
ISO 3537 Road vehicles – Safety glazing materials – Mechanical tests
ISO 3538 Road vehicles – Safety glazing materials – Test methods for optical properties
ISO 3601 Fluid power systems – O-rings
ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
ISO 3601-2 Housing dimensions for general applications
ISO 3601-3 Quality acceptance criteria
ISO 3601-4 Anti-extrusion rings (back-up rings)
ISO 3601-5 Suitability of elastomeric materials for industrial applications
ISO 3602 Documentation – Romanization of Japanese (kana script)
ISO 3632 Spices – Saffron (Crocus sativus L.)[Note 3]
ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure
ISO 3676 Packaging – Unit load sizes – Dimensions
ISO 3864 Graphical symbols – Safety colours and safety signs
ISO 3901 Information and documentation – International Standard Recording Code (ISRC)
ISO 3977 Gas turbines – Procurement
ISO 4074 Natural latex rubber condoms – Requirements and test methods
ISO 4157 Construction drawings – Designation systems
ISO 4157-1 Buildings and part of buildings
ISO 4157-2 Room names and numbers
ISO 4157-3 Room identifiers
ISO 4165 Road vehicles — Electrical connections — Double-pole connection
ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
ISO 4217 Codes for the representation of currencies and funds
ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 4628 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
ISO 4628-1 General introduction and designation system
ISO 4628-2 Assessment of degree of blistering
ISO 4628-3 Assessment of degree of rusting
ISO 4628-4 Assessment of degree of cracking
ISO 4628-5 Assessment of degree of flaking
ISO 4628-6 Assessment of degree of chalking by tape method
ISO 4628-7 Assessment of degree of chalking by velvet method
ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
ISO 4628-10 Assessment of degree of filiform corrosion
ISO/IEC 4873:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation
ISO 4892 Plastics – Methods of exposure to laboratory light sources ISO 5000 – ISO 9999
ISO 5127 Information and documentation – Vocabulary
ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
ISO 5167-1 General principles and requirements
ISO 5167-2 Orifice plates
ISO 5167-3 Nozzles and Venturi nozzles
10 | P a g e
ISO 5167-4 Venturi tubes
ISO/IEC 5218 Information technology – Codes for the representation of human sexes
ISO 5455 Technical drawings – Scales
ISO 5457 Technical product documentation – Sizes and layout of drawing sheets
ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate
ISO 5660-1 Heat release rate (cone calorimeter method)
ISO 5660-2 Smoke production rate (dynamic measurement)
ISO/TS 5660-3 Guidance on measurement
ISO 5725 Accuracy (trueness and precision) of measurement methods and results
ISO 5775 Bicycle tires and rims
ISO 5776 Graphic technology - Symbols for text correction
ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
ISO 5971:1981 Size designation of clothes – Pantyhose
ISO 5993 Sodium hydroxide for industrial use -- Determination of mercury content -- Flameless atomic absorption spectrometric method
ISO 6107-4:1993 Water quality -- Vocabulary
ISO 6166 Securities and related financial instruments – International securities identification numbering system (ISIN)
ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
ISO 6194-5 Identification of visual imperfections
ISO 6336 Calculation of load capacity of spur and helical gears
ISO 6344 Coated abrasives – Grain size analysis
ISO 6344-1 Grain size distribution test
ISO 6344-2 Determination of grain size distribution of macrogrits P12 to P220
ISO 6344-3 Determination of grain size distribution of microgrits P240 to P2500
ISO/IEC 6429 Information technology – Control functions for coded character sets
ISO 6438 Documentation – African coded character set for bibliographic information interchange
ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
ISO 6579 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Salmonella spp.
ISO 6594 Cast iron drainage pipes and fittings – Spigot series
ISO 6709 Standard representation of geographic point location by coordinates
ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
ISO 7001 Graphical symbols – Public information symbols
ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
ISO 7098 Information and documentation – Romanization of Chinese
ISO 7200 Technical product documentation – Data fields in title blocks and document headers
ISO 7240 Fire detection and alarm systems
ISO 7372 Trade data interchange
ISO/IEC 7498 Information technology -- Open Systems Interconnection -- Basic Reference Model[Note 3]
ISO/IEC 7498-1 The Basic Model
ISO 7498-2 Security Architecture
ISO/IEC 7498-3 Naming and addressing
ISO/IEC 7498-4 Management framework
ISO/IEC 7501 Identification cards – Machine readable travel documents
ISO/IEC 7501-1:2008 Machine readable passport
ISO/IEC 7501-2:1997 Machine readable visa
ISO/IEC 7501-3:2005 Machine readable official travel documents
ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
ISO/IEC 7810 Identification cards – Physical characteristics
ISO/IEC 7811 Identification cards – Recording technique
ISO/IEC 7812 Identification cards – Identification of issuers
ISO/IEC 7813 Information technology – Identification cards – Financial transaction cards
ISO/IEC 7816 Identification cards – Integrated circuit cards[Note 3]
ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
ISO 8000 Data quality
ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
ISO 8090 Cycles – Terminology
ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
ISO 8373 Manipulating industrial robots – Vocabulary
11 | P a g e
ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions
ISO 8573 Compressed air
ISO 8573-1 Contaminants and purity classes
ISO 8573-2 Test methods for oil aerosol content
ISO 8573-3 Test methods for measurement of humidity
ISO 8573-4 Test methods for solid particle content
ISO 8573-5 Test methods for oil vapour and organic solvent content
ISO 8573-6 Test methods for gaseous contaminant content
ISO 8573-7 Test method for viable microbiological contaminant content
ISO 8573-8 Test methods for solid particle content by mass concentration
ISO 8573-9 Test methods for liquid water content
ISO 8583 Financial transaction card originated messages – Interchange message specifications
ISO 8583-1 Messages, data elements and code values
ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
ISO 8583-3 Maintenance procedures for messages, data elements and code values
ISO 8601 Data elements and interchange formats – Information interchange – Representation of dates and times
ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
ISO/IEC 8632-1 Functional specification
ISO/IEC 8632-2 Character encoding
ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]
ISO/IEC 8632-4 Clear text encoding
ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings[Note 3]
ISO/IEC 8652 Information technology – Programming languages – Ada
ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
ISO/IEEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
ISO/IEEC 8806-4 C
ISO 8807 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behaviour
ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
ISO/IEC 8825 Information technology – ASN.1 encoding rules
ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
ISO/IEC 8859-1 Latin alphabet No. 1
ISO/IEC 8859-2 Latin alphabet No. 2
ISO/IEC 8859-3 Latin alphabet No. 3
ISO/IEC 8859-4 Latin alphabet No. 4
ISO/IEC 8859-5 Latin/Cyrillic alphabet
ISO/IEC 8859-6 Latin/Arabic alphabet
ISO/IEC 8859-7 Latin/Greek alphabet
ISO/IEC 8859-8 Latin/Hebrew alphabet
ISO/IEC 8859-9 Latin alphabet No. 5
ISO/IEC 8859-10 Latin alphabet No. 6
ISO/IEC 8859-11 Latin/Thai alphabet
ISO/IEC 8859-13 Latin alphabet No. 7
ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)
ISO/IEC 8859-15 Latin alphabet No. 9
ISO/IEC 8859-16 Latin alphabet No. 10
ISO 8879 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
ISO 9000 Quality management systems – Fundamentals and vocabulary
ISO 9001 Quality management systems – Requirements
ISO 9004 Managing for the sustained success of an organization – A quality management approach
ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
ISO 9069 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
12 | P a g e
ISO/IEC 9075 Information technology – Database languages – SQL
ISO/IEC 9126 Software engineering – Product quality
ISO 9141 Road vehicles – Diagnostic systems[Note 3]
ISO 9141-2 CARB requirements for interchange of digital information
ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
ISO 9241 Ergonomics of human-system interaction
ISO/IEC 9293 Information technology – Volume and file structure of disk cartridges for information interchange
ISO 9362 Banking – Banking telecommunication messages – Business identifier code (BIC)
ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
ISO/IEC 9541 Information technology – Font information interchange
ISO/IEC 9541-1:1991 Architecture
ISO/IEC 9541-2:1991 Interchange Format
ISO/IEC 9541-3:1994 Glyph shape representation
ISO/IEC 9541-4:2009 Harmonization to Open Font Format
ISO 9564 Financial services – Personal Identification Number (PIN) management and security[Note 3]
ISO/IEC 9579 Information technology – Remote database access for SQL with security enhancement
ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical Interactive Graphics System (PHIGS)
ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 3]
ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
ISO/IEC 9636-1 Overview, profiles, and conformance
ISO/IEC 9636-2 Control
ISO/IEC 9636-3 Output
ISO/IEC 9636-4 Segments
ISO/IEC 9636-5 Input and echoing
ISO/IEC 9636-6 Raster
ISO 9660 Information processing – Volume and file structure of CD-ROM for information interchange
ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel
ISO/IEC 9796 Information technology – Security techniques – Digital signature schemes giving message recovery
ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
ISO/IEC 9797-1 Mechanisms using a block cipher
ISO/IEC 9797-2 Mechanisms using a dedicated hash-function
ISO/IEC 9798 Information technology – Security techniques – Entity authentication
ISO/IEC 9834 Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
ISO/IEC 9899 Programming languages – C
ISO/IEC/IEEE 9945 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
ISO 9984 Information and documentation – Transliteration of Georgian characters into Latin characters
ISO 9985 Information and documentation – Transliteration of Armenian characters into Latin characters
ISO 9992 Financial transaction cards – Messages between the integrated circuit card and the card accepting device
ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
ISO 9999 Assistive products for persons with disability – Classification and terminology ISO 10000 – ISO 14999
ISO 10003:2007 Quality management – Customer satisfaction – Guidelines for dispute resolution external to organizations
ISO 10005:2005 Quality management systems – Guidelines for quality plans
ISO 10006 Quality management systems – Guidelines for quality management in projects
ISO 10007 Quality management systems – Guidelines for configuration management
ISO 10012 Measurement management systems – Requirements for measurement processes and measuring equipment
ISO/IEC 10021 Information technology – Message Handling Systems (MHS)
ISO/IEC 10026 Information technology – Open Systems Interconnection
ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
ISO/IEC 10089 Information technology – 130 mm rewritable optical disk cartridge for information interchange
ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher
ISO/IEC 10118 Information technology – Security techniques – Hash-functions
ISO 10160 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition
ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification
13 | P a g e
ISO/IEC 10164 Information technology – Open Systems Interconnection – Systems Management
ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL)
ISO/IEC 10206 Information technology – Progamming languages – Extended Pascal
ISO 10211 Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
ISO/IEC 10279 Information technology – Programming languages – Full BASIC
ISO 10303 Industrial automation systems and integration – Product data representation and exchange
ISO 10380 Pipework — Corrugated metal hoses and hose assemblies
ISO 10383 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
ISO 10487 Passenger cars – Connections for car radios[Note 3]
ISO 10555 Sterile, single-use intravascular catheters
ISO 10628 Flow diagrams for process plants
ISO/IEC 10646 Information technology – Universal Coded Character Set (UCS)
ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
ISO/IEC 10746-1 Information technology - Open Distributed Processing - Reference model: Overview
ISO/IEC 10746-2 Information technology - Open distributed processing - Reference model: Foundations
ISO/IEC 10746-3 Information technology - Open distributed processing - Reference model: Architecture
ISO/IEC 10746-4 Information technology - Open Distributed Processing - Reference Model: Architectural semantics
ISO 10957 Information and documentation – International standard music number (ISMN)
ISO 10962 Securities and related financial instruments – Classification of Financial Instruments (CFI code)
ISO 10993 Biological evaluation of medical devices
ISO 10993-1 Evaluation and testing within a risk management process
ISO 10993-2 Animal welfare requirements
ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicity
ISO 10993-4 Selection of tests for interactions with blood
ISO 10993-5 Tests for in vitro cytotoxicity
ISO 10993-6 Tests for local effects after implantation
ISO 10993-7 Ethylene oxide sterilization residuals
ISO 10993-9 Framework for identification and quantification of potential degradation products
ISO 10993-10 Tests for irritation and skin sensitization
ISO 10993-11 Tests for systemic toxicity
ISO 10993-12 Sample preparation and reference materials
ISO 10993-13 Identification and quantification of degradation products from polymeric medical devices
ISO 10993-14 Identification and quantification of degradation products from ceramics
ISO 10993-15 Identification and quantification of degradation products from metals and alloys
ISO 10993-16 Toxicokinetic study design for degradation products and leachables
ISO 10993-17 Establishment of allowable limits for leachable substances
ISO 10993-18 Chemical characterization of materials
ISO 10993-19 Physico-chemical, morphological and topographical characterization of materials
ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices
ISO 11064 Ergonomic design of control centres
ISO 11064-1:2000 Principles for the design of control centres
ISO 11064-2:2000 Principles for the arrangement of control suites
ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
ISO 11064-4:2004 Layout and dimensions of workstations
ISO 11064-5:2008 Displays and controls
ISO 11064-6:2005 Environmental requirements for control centres
ISO 11064-7:2006 Principles for the evaluation of control centres
ISO 11137 Sterilization of health care products – Radiation
ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
ISO/IEC 11179 Information technology – Metadata registries (MDR)
ISO/IEC 11179-1:2004 Framework
ISO/IEC 11179-2:2005 Classification
ISO/IEC 11179-3:2003 Registry metamodel and basic attributes
ISO/IEC 11179-4:2004 Formulation of data definitions
ISO/IEC 11179-5:2005 Naming and identification principles
ISO/IEC 11179-6:2005 Registration
14 | P a g e
ISO 11357 Plastics – Differential scanning calorimetry (DSC)
ISO 11357-1:2009 General principles
ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
ISO 11357-4:2005 Determination of specific heat capacity
ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11357-7:2002 Determination of crystallization kinetics
ISO/IEC 11404 Information technology – General-Purpose Datatypes (GPD)
ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
ISO 11469:2000 Plastics – Generic identification and marking of plastics products
ISO/IEC 11578:1996 Information technology – Open Systems Interconnection – Remote procedure call (RPC)
ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
ISO/IEC 11801 Information technology – Generic cabling for customer premises
ISO 11898 Road vehicles – Controller area network (CAN)
ISO 12006 Building construction – Organization of information about construction works
ISO/IEC 12207 Systems and software engineering – Software life cycle processes
ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction
ISO 12639 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT)
ISO 12641 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration
ISO/TS 12805:2011 Nanotechnologies – Materials specifications – Guidance on specifying nano-objects
ISO 12859/TR Intelligent transport systems – System architecture – Privacy aspects in ITS standards and systems
ISO 12944 Paints and varnishes – Corrosion protection of steel structures by protective paint systems
ISO 13007 Ceramic tiles – Grouts and adhesives
ISO 13007-1:2010 Terms, definitions and specifications for adhesives
ISO 13007-2:2010 Test methods for adhesives
ISO 13007-3:2010 Terms, definitions and specifications for grouts
ISO 13007-4:2010 Test methods for grouts
ISO/TR 13121:2011 Nanotechnologies – Nanomaterial risk evaluation
ISO 13239 Information technology – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures
ISO/IEC 13249 Information technology – Database languages – SQL multimedia and application
ISO/IEC 13250 Information technology – Topic Maps[Note 3]
ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods
ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat panels – Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
ISO 13450 Photography – 110-size cartridge, film and backing paper – Dimensions
ISO 13485:2003 Medical devices – Quality management systems – Requirements for regulatory purposes
ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange
ISO 13567 Technical product documentation – Organization and naming of layers for CAD
ISO/IEC 13568:2002 Information Technology – Z formal specification notation – Syntax, type system and semantics
ISO 13577 Industrial furnaces and associated processing equipment - Safety
ISO 13577-1 General requirements
ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency
ISO 13579-1 General methodology
ISO 13579-2 Reheating furnaces for steel
ISO 13579-3 Batch-type aluminium melting furnaces
ISO 13579-4 Furnaces with protective or reactive atmosphere
ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach
ISO 13616 Financial services – International bank account number (IBAN)
ISO 13628 Petroleum and natural gas industries – Design and operation of subsea production systems
ISO 13628-1 General requirements and recommendations
ISO 13628-2 Unbonded flexible pipe systems for subsea and marine applications
ISO 13628-3 Through flowline (TFL) systems
ISO 13628-4 Subsea wellhead and tree equipment
15 | P a g e
ISO 13628-5 Subsea umbilicals
ISO 13628-6 Subsea production control systems
ISO 13628-7 Completion/workover riser systems
ISO 13628-8 Remotely Operated Vehicle (ROV) interfaces on subsea production systems
ISO 13628-9 Remotely Operated Tool (ROT) intervention systems
ISO 13628-10 Specification for bonded flexible pipe
ISO 13628-11 Flexible pipe systems for subsea and marine applications
ISO 13715 Technical drawings—Edges of undefined shape—Vocabulary and indications
ISO 13849 Safety of machinery – Safety related parts of control systems
ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information
ISO 13837 Road vehicles – Safety glazing materials – Method for the determination of solar transmittance
ISO 14000 Environmental management systems [This is a set of standards, rather than a single standard.]
ISO 14001 Environmental management systems – Requirements with guidance for use
ISO 14004:2004 Environmental management systems – General guidelines on principles, systems and support techniques
ISO 14031 Environmental management - Environmental performance evaluation – Guidelines
ISO 14050 Environmental management – Vocabulary
ISO 14051 Environmental management – Material flow cost accounting - General framework
ISO 14064 Greenhouse gases
ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice
ISO 14223 Radiofrequency [sic] identification of animals – Advanced transponders
ISO 14224 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000
ISO 14230-1 Physical layer
ISO 14230-2 Data link layer
ISO 14230-3 Application layer
ISO 14230-4 Requirements for emission-related systems
ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
ISO/IEC 14462 - Open-EDI Reference Model
ISO/IEC 14496 Information technology – Coding of audio-visual objects
ISO 14641 Electronic archiving
ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
ISO 14644 Cleanrooms and associated controlled environments
ISO 14644-1:1999 Classification of air cleanliness
ISO 14644-2:2000 Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
ISO 14644-3:2005 Test methods
ISO 14644-4:2001 Design, construction and start-up
ISO 14644-5:2004 Operations
ISO 14644-6:2007 Vocabulary
ISO 14644-7:2004 Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)
ISO 14644-8:2006 Classification of airborne molecular contamination
ISO/IEC 14651 Information technology – International string ordering and comparison – Method for comparing character strings and description of the common template tailorable ordering
ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
ISO 14698-1 General principles and methods
ISO 14698-2 Evaluation and interpretation of biocontamination data
ISO/IEC 14750 Information technology – Open Distributed Processing – Interface Definition Language
ISO/IEC 14755 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
ISO 14801 Dentistry – Implants – Dynamic fatigue test for endosseous dental implants
ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
ISO 14855-1:2005 General method
ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO/IEC 14882 Programming Languages – C++
ISO 14915 Software ergonomics for multimedia user interfaces
ISO 14915-1:2002 Design principles and framework
ISO 14915-2:2003 Multimedia navigation and control
ISO 14915-3:2002 Media selection and combination
ISO 14971:2007 Medical devices – Application of risk management to medical devices
ISO/IEC 14977 Information technology – Syntactic metalanguage – Extended BNF
16 | P a g e
ISO 15000 – ISO 19999
ISO/TS 15000 Electronic business eXtensible Markup Language ebXML
ISO/TS 15000-1:2004 Collaboration-protocol profile and agreement specification (ebCPP)
ISO/TS 15000-2:2004 Message service specification (ebMS)
ISO/TS 15000-3:2004 Registry information model specification (ebRIM)
ISO/TS 15000-4:2004 Registry services specification (ebRS)
ISO/TS 15000-5:2005 ebXML. Core Components Technical Specification, Version 2.01(ebCCTS)
ISO 15022 Securities – Scheme for messages (Data Field Dictionary)
ISO 15082 Road vehicles – Tests for rigid plastic safety glazing materials
ISO 15099 Thermal performance of windows, doors and shading devices – Detailed calculations
ISO 15112 Natural gas – Energy determination
ISO 15189 Medical laboratories – Particular requirements for quality and competence
ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
ISO/IEC 15288 Systems and software engineering – System life cycle processes
ISO/IEC 15289 Systems and software engineering – Content of systems and software life cycle process information products (Documentation)
ISO/IEC 15291 Information technology – Programming languages – Ada Semantic Interface Specification (ASIS)
ISO 15403 Natural gas – Natural gas for use as a compressed fuel for vehicles
ISO 15403-1 Designation of the quality
ISO/IEC 15408 Information technology – Security techniques – Evaluation criteria for IT security
ISO/IEC 15414 - Open data processing - Reference Model - Enterprise Language
ISO/IEC 15434 Information technology – Automatic identification and data capture techniques – Syntax for high-capacity ADC media
ISO/IEC 15444 Information technology – JPEG 2000 image coding system
ISO/IEC 15445:2000 Information technology – Document description and processing languages – HyperText Markup Language (HTML)
ISO 15489-1:2001 Information and documentation – Records management – Part 1: General
ISO/TR 15489-2:2001 Information and documentation – Records management – Part 2: Guidelines
ISO/IEC 15504 Information technology – Process assessment
ISO 15614 Specification and qualification of welding procedures for metallic materials – Welding procedure test
ISO 15686 Buildings and constructed assets – Service life planning
ISO/IEC 15693 Identification cards – Contactless integrated circuit cards – Vicinity cards
ISO 15706 Information and documentation – International Standard Audiovisual Number (ISAN)
ISO 15707 Information and documentation – International Standard Musical Work Code (ISWC)
ISO 15783:2002 Seal-less rotodynamic pumps – Class II – Specification
ISO 15836 Information and documentation – The Dublin Core metadata element set
ISO/IEC 15897 Information technology – Procedures for registration of cultural elements
ISO 15924 Information and documentation – Codes for the representation of names of scripts
ISO 15926 - Integration of Life-cycle Data for Process Plants including Oil and Gas Production Facilities
ISO 15930 Graphic technology – Prepress digital data exchange using PDF[Note 3]
ISO/IEC 15944 - Business Agreement Semantic Descriptive Techniques
ISO/IEC 15948 Information technology – Computer graphics and image processing – Portable Network Graphics (PNG): Functional specification
ISO 15970 Natural gas – Measurement of properties – Volumetric properties: density, pressure, temperature and compression factor
ISO 15971:2008 Natural gas – Measurement of properties – Calorific value and Wobbe index
ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions – Method by analysis of released biogas
ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
ISO 16232 Road vehicles – Cleanliness of components of fluid circuits
ISO 16232-8 Particle nature determination by microscopic analysis
ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
ISO 16232-10 Expression of results
ISO/IEC 16262 Information technology – Programming languages, their environments and system software interfaces – ECMAScript language specification
ISO/IEC 16500 Information technology – Generic digital audio-visual systems
ISO 16549 Textiles – Unevenness of textile strands – Capacitance method
ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment
ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
ISO/TR 16982:2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design
17 | P a g e
ISO/IEC 17020:1998 General criteria for the operation of various types of bodies performing inspection
ISO/IEC 17024:2003 Conformity assessment – General requirements for bodies operating certification of persons
ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories
ISO 17088:2012 Specifications for compostable plastics
ISO 17202 Textiles – Determination of twist in single spun yarns – Untwist/retwist method
ISO/PAS 17506 Industrial automation systems and integration – COLLADA digital asset schema specification for 3D visualization of industrial data
ISO 17776 Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and techniques for hazard identification and risk assessment
ISO 17799 - Code of Practice for Information Security Management (superseded by ISO/IEC 27002)
ISO 17894 Ships and marine technology – Computer applications – General principles for the development and use of programmable electronic systems in marine applications
ISO/IEC 18000 Information technology – Radio frequency identification for item management
ISO/IEC 18000-1 Reference architecture and definition of parameters to be standardized
ISO/IEC 18000-2 Parameters for air interface communications below 135 kHz
ISO/IEC 18000-3 Parameters for air interface communications at 13,56 MHz
ISO/IEC 18000-4 Parameters for air interface communications at 2,45 GHz
ISO/IEC 18000-6 Parameters for air interface communications at 860 MHz to 960 MHz
ISO/IEC 18000-7 Parameters for active air interface communications at 433 MHz
ISO/IEC 18004 Information technology – Automatic identification and data capture techniques – QR Code 2005 bar code symbology specification
ISO/IEC 18009 Information technology – Programming languages – Ada: Conformity assessment of a language processor
ISO/IEC 18013 Information technology – Personal identification – ISO-compliant driving license
ISO/IEC 18013-1:2005 Physical characteristics and basic data set
ISO/IEC 18013-2:2008 Machine-readable technologies
ISO/IEC 18013-3:2009 Access control, authentication and integrity validation
ISO/IEC 18014 Information technology – Security techniques – Time-stamping services
ISO/IEC 18023 Information technology – SEDRIS
ISO/IEC 18023-1:2006 Functional specification
ISO/IEC 18023-2:2006 Abstract transmittal format
ISO/IEC 18023-3:2006 Transmittal format binary encoding
ISO/IEC 18024-4:2006 Information technology – SEDRIS language bindings – Part 4: C
ISO/IEC 18025:2005 Information technology – Environmental Data Coding Specification (EDCS)
ISO/IEC 18026 Information technology – Spatial Reference Model (SRM)
ISO/IEC 18033 Information technology – Security techniques – Encryption algorithms
ISO/IEC 18033-1 General
ISO/IEC 18033-2 Asymmetric ciphers
ISO/IEC 18033-3 Block ciphers
ISO/IEC 18033-4 Stream ciphers
ISO/IEC 18041-4 Information technology – Computer graphics, image processing and environmental data representation – Environmental Data Coding Specification (EDCS) language bindings – Part 4: C
ISO/IEC 18042-4:2006 Information technology – Computer graphics and image processing – Spatial Reference Model (SRM) language bindings – Part 4: C
ISO/IEC 18092 Information technology – Telecommunications and information exchange between systems – Near Field Communication – Interface and Protocol (NFCIP-1)
ISO 18117:2009 Surface chemical analysis – Handling of specimens prior to analysis
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/TS 18152 Ergonomics of human-system interaction – Specification for the process assessment of human-system issues
ISO 18185 Freight containers – Electronic seals
ISO 18245 Retail financial services – Merchant category codes
ISO/TR 18529:2000 Ergonomics – Ergonomics of human-system interaction – Human-centred lifecycle process descriptions
ISO 18629 Industrial automation systems and integration – Process specification language
ISO 19005 Document management – Electronic document file format for long-term preservation
ISO 19011 Guidelines for quality and/or environmental management systems auditing
ISO 19092 Financial services – Biometrics – Security framework
ISO 19101 Geographic information – Reference model
ISO/TS 19103 Geographic information – Conceptual schema language
ISO/TS 19104 Geographic information – Terminology
ISO 19105 Geographic information – Conformance and testing
ISO 19106 Geographic information – Profiles
ISO 19107 Geographic information – Spatial schema
18 | P a g e
ISO 19108 Geographic information – Temporal schema
ISO 19109 Geographic information – Rules for application schema
ISO 19110 Geographic information – Methodology for feature cataloguing
ISO 19111 Geographic information – Spatial referencing by coordinates
ISO 19112 Geographic information – Spatial referencing by geographic identifiers
ISO 19113 Geographic information – Quality principles
ISO 19114 Geographic information – Quality evaluation procedures
ISO 19115 Geographic information – Metadata
ISO 19116 Geographic information – Positioning services
ISO 19117 Geographic information – Portrayal
ISO 19118 Geographic information – Encoding
ISO 19119 Geographic information – Services
ISO/TR 19120 Geographic information – Functional standards
ISO/TR 19121 Geographic information – Imagery and gridded data
ISO/TR 19122 Geographic information / Geomatics – Qualification and certification of personnel
ISO 19123 Geographic information – Schema for coverage geometry and functions
ISO 19125 Geographic information – Simple feature access
ISO 19126 Geographic information – Feature concept dictionaries and registers
ISO/TS 19127 Geographic information – Geodetic codes and parameters
ISO 19128 Geographic information – Web map server interface
ISO/TS 19129 Geographic information – Imagery, gridded and coverage data framework
ISO/TS 19130 Geographic information – Imagery sensor models for geopositioning
ISO 19131 Geographic information – Data product specifications
ISO 19132 Geographic information – Location-based services – Reference model
ISO 19133 Geographic information – Location-based services – Tracking and navigation
ISO 19134 Geographic information – Location-based services – Multimodal routing and navigation
ISO 19135 Geographic information – Procedures for item registration
ISO 19136 Geographic information – Geography Markup Language (GML)
ISO 19137 Geographic information – Core profile of the spatial schema
ISO/TS 19138 Geographic information – Data quality measures
ISO/TS 19139 Geographic information – Metadata – XML schema implementation
ISO 19141 Geographic information – Schema for moving features
ISO 19142 Geographic information – Web Feature Service
ISO 19143 Geographic information – Filter encoding
ISO 19144 Geographic information – Classification systems
ISO 19146 Geographic information – Cross-domain vocabularies
ISO 19156 Geographic information - Observations and measurements
ISO 19439 Enterprise integration – Framework for enterprise modelling
ISO 19440 Enterprise integration – Constructs for enterprise modelling
ISO/IEC 19501 Information technology – Open Distributed Processing – Unified Modeling Language (UML) Version 1.4.2
ISO/IEC 19502 Information technology – Meta Object Facility (MOF)
ISO/IEC 19503 Information technology – XML Metadata Interchange (XMI)
ISO/IEC 19752 Information technology – Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components
ISO/IEC 19757 Information technology – Document Schema Definition Languages (DSDL)
ISO/IEC 19757-2 Regular-grammar-based validation – RELAX NG
ISO/IEC 19757-3 Rule-based validation – Schematron
ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)
ISO/IEC 19770 Information technology – Software asset management
ISO/IEC 19785 Information technology – Common Biometric Exchange Formats Framework
ISO/IEC 19788 Information technology – Learning, education and training – Metadata for learning resources
ISO/IEC 19790 Information technology – Security techniques – Security requirements for cryptographic modules
ISO/IEC 19793 - Open Distributed Processing -- Use of UML for ODP system specifications
ISO/IEC 19794 Information technology – Biometric data interchange formats
ISO/IEC 19794-1:2011 Framework
ISO/IEC 19794-2:2005 Finger minutiae data
ISO/IEC 19794-3:2006 Finger pattern spectral data
ISO/IEC 19794-4:2005 Finger image data
ISO/IEC 19794-5:2005 Face image data
ISO/IEC 19794-6:2005 Iris image data
ISO/IEC 19794-7:2007 Signature/sign time series data
19 | P a g e
ISO/IEC 19794-8:2006 Finger pattern skeletal data
ISO/IEC 19794-9:2007 Vascular image data
ISO/IEC 19794-10:2007 Hand geometry silhouette data ISO 20000 – ISO 29999
ISO/IEC 20000 Information technology – Service management
ISO 20022 Financial services – UNIversal Financial Industry message scheme
ISO 20653 Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access
ISO/IEC TR 20943 Information technology – Procedures for achieving metadata registry content consistency
ISO/IEC TR 20943-1:2003 Data elements
ISO/IEC TR 20943-3:2004 Value domains
ISO/IEC 21000 Information technology – Multimedia framework (MPEG-21)
ISO/IEC 21481 Information technology – Telecommunications and information exchange between systems – Near Field Communication Interface and Protocol -2 (NFCIP-2)
ISO 21482 Ionizing-radiation warning – Supplementary symbol
ISO 22000 Food safety management systems – Requirements for any organization in the food chain
ISO/TS 22003 Food safety management systems – Requirements for bodies providing audit and certification of food safety management systems
ISO 22093 Industrial automation systems and integration – Physical device control – Dimensional Measuring Interface Standard (DMIS)
ISO 22241 Diesel engines – NOx reduction agent AUS 32
ISO 22241-1 Quality requirements
ISO 22241-2 Test methods
ISO 22241-3 Handling, transportation and storing
ISO/IEC TR 22250 Information technology – Document description and processing languages – Regular Language Description for XML (RELAX)
ISO/IEC TR 22250-1:2002 RELAX Core
ISO 22301:2012 Societal security – Business continuity management systems – Requirements
ISO/PAS 22399:2007 Societal security – Guideline for incident preparedness and operational continuity management
ISO 22716:2007 Cosmetics – Good Manufacturing Practices (GMP) – Guidelines on Good Manufacturing Practices
ISO/IEC 23003 Information technology – MPEG audio technologies
ISO/IEC 23003-1 MPEG Surround
ISO/IEC 23003-2 Spatial Audio Object Coding (SAOC)
ISO/IEC 23270 Information technology – Programming languages – C#
ISO/IEC 23271 Information technology – Common Language Infrastructure (CLI)
ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1
ISO/IEC 23360-1 Generic specification
ISO/IEC 23360-2 Specification for IA32 architecture
ISO/IEC 23360-3 Specification for IA64 architecture
ISO/IEC 23360-4 Specification for AMD64 architecture
ISO/IEC 23360-5 Specification for PPC32 architecture
ISO/IEC 23360-6 Specification for PPC64 architecture
ISO/IEC 23360-7 Specification for S390 architecture
ISO/IEC 23360-8 Specification for S390X architecture
ISO 23733 Textiles – Chenille yarns – Test method for the determination of linear density
ISO 23950 Information and documentation – Information retrieval (Z39.50) – Application service definition and protocol specification
ISO/IEC 24707:2007 Information technology – Common Logic (CL): a framework for a family of logic-based languages
ISO/IEC 24727 Identification cards – Integrated circuit card programming interfaces
ISO/IEC 24727-1 Architecture
ISO/IEC 24727-2 Generic card interface
ISO/IEC 24727-3 Application interface
ISO/IEC 24727-4 Application programming interface (API) administration
ISO/IEC 24727-5 Testing procedures
ISO/IEC 24727-6 Registration authority procedures for the authentication protocols for interoperability
ISO/IEC 24744:2007 Software Engineering – Metamodel for Development Methodologies
ISO/IEC 24762:2008 Information technology – Security techniques – Guidelines for information and communications technology disaster recovery services
ISO 26000 Guidance on social responsibility
ISO/IEC 26300 Information technology – Open Document Format for Office Applications (OpenDocument) v1.0
20 | P a g e
ISO/IEC 27000 Information technology – Security techniques – Information security management systems – Overview and vocabulary
ISO/IEC 27001 Information technology – Security techniques – Information security management systems – Requirements
ISO/IEC 27002 Information technology – Security techniques – Code of practice for information security management
ISO/IEC 27003 Information technology – Security techniques – Information security management system implementation guidance
ISO/IEC 27004 Information technology – Security techniques – Information security management – Measurement
ISO/IEC 27005 Information technology – Security techniques – Information security risk management
ISO/IEC 27006 Information technology – Security techniques – Requirements for bodies providing audit and certification of information security management systems
ISO/IEC 27011 Information technology – Security techniques – Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
ISO/IEC 27037:2012 Information technology – Security techniques – Guidelines for identification, collection, acquisition and preservation of digital evidence
ISO/TS 27687:2008 Nanotechnologies – Terminology and definitions for nano-objects – Nanoparticle, nanofibre and nanoplate
ISO 28000 Specification for security management systems for the supply chain
ISO 28001:2007 Security management systems for the supply chain – Best practices for implementing supply chain security, assessments and plans – Requirements and guidance
ISO 28003 Security management systems for the supply chain – Requirements for bodies providing audit and certification of supply chain security management systems
ISO 28004 Security management systems for the supply chain – Guidelines for the implementation of ISO 28000
ISO 28300:2008 Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks
ISO/IEC 29500 Information technology – Document description and processing languages – Office Open XML File Formats
ISO/IEC 29500-1 Fundamentals and Markup Language Reference
ISO/IEC 29500-2 Open Packaging Conventions
ISO/IEC 29500-3 Markup Compatibility and Extensibility
ISO/IEC 29500-4 Transitional Migration Features ISO 30000 – ISO 39999
ISO 30000:2009 Ships and marine technology – Ship recycling management systems – Specifications for management systems for safe and environmentally sound ship recycling facilities
ISO 31000:2009 Risk management – Principles and guidelines
ISO/IEC 31010:2009 Risk management - Risk assessment techniques
ISO 32000 Document management – Portable document format
ISO/IEC 38500:2008 Corporate governance of information technology
ISO 50000 - ISO 59999
ISO 50001:2011 Energy management systems – Requirements with guidance for use
ISO 80000
ISO/IEC 80000 Quantities and units
ISO/TS 80004 Nanotechnologies – Vocabulary
ISO/TS 80004-1 Core terms
ISO/TS 80004-3 Carbon nano-objects
ISO/TS 80004-4 Nanostructured materials
ISO/TS 80004-5 Nano/bio interface
ISO/TS 80004-7 Diagnostics and therapeutics for healthcare
21 | P a g e
ASTM International Standards
ASTM International, known until 2001 as the American Society for Testing and
Materials (ASTM), is an international standards organization that develops and publishes
voluntary consensus technical standards for a wide range of materials, products, systems,
and services. The organization's headquarters is in West Conshohocken, Pennsylvania,
about 5 mi (8.0 km) northwest of Philadelphia.
ASTM, founded in 1898 as the American Section of the International Association for
Testing and Materials, predates other standards organizations such
as BSI (1901), DIN (1917), ANSI (1918) and AFNOR (1926). ASTM has a dominant role
among standards developers in the USA, and claims to be the world's largest developer of
standards. Using a consensus process, ASTM supports thousands of volunteer technical
committees, which draw their members from around the world and collectively develop
and maintain more than 12,000 standards.
ASTM International publishes the Annual Book of ASTM Standards each year in
print, Compact Disc (CD) and online versions. The online version was available by
subscription and cost was based upon usage. For 2008, the complete set of books or CDs
cost almostUS$9000 and included 81 volumes. For 2010, the complete set of books or CDs
cost almost $9700 and included 82 volumes.
1. History
A group of scientists and engineers, led by Charles Benjamin Dudley formed the American
Society for Testing and Materials in 1898 to address the frequent rail breaks plaguing the fast-growing railroad industry. The group
developed a standard for the steel used to fabricate rails.
In 2001, ASTM changed its name to ASTM International to reflect global participation in ASTM and worldwide use of its standards.
In 2009, a joint effort by standards development organizations AAMI, ANSI, ASTM, and DIN created a single, centralized database for
medical device standards.[1]
2. Standards
The standards produced by ASTM International fall into six categories:
The Standard Specification, that defines the requirements to be satisfied by subject of the standard.
The Standard Test Method, that defines the way a test is performed and the precision of the result. The result of the test may be
used to assess compliance with a Standard Specification.
The Standard Practice, that defines a sequence of operations that, unlike a Standard Test Method, does not produce a result.
The Standard Guide, that provides an organized collection of information or series of options that does not recommend a specific
course of action.
The Standard Classification, that provides an arrangement or division of materials, products, systems, or services into groups based
on similar characteristics such as origin, composition, properties, or use.
The Terminology Standard, that provides agreed definitions of terms used in the other standards.
The quality of the standards is such that they are frequently used worldwide.
3. List Of Standards
Architectural Metal Fence Systems
ASTM International
Formation 1898
Headquarters West Conshohocken,
Pennsylvania
Location United States
Coordinates 40.069208°N
75.308863°W
Website www.astm.org
22 | P a g e
Designation Title
F2408 – 11 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
F2453 / F2453M - 05(2011)e1
Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
F2589 - 11 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
F2919 / F2919M - 12
Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels
F2957 - 13 Standard Specification for Ornamental Aluminum Fence Systems
Bars
Designation Title
A29 / A29M - 12e1 Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
A108 - 13 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A125 - 96(2013)e1 Standard Specification for Steel Springs, Helical, Heat-Treated
A255 - 10 Standard Test Methods for Determining Hardenability of Steel
A304 - 11 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A311 / A311M - 04(2010)
Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A322 - 13 Standard Specification for Steel Bars, Alloy, Standard Grades
A355 - 89(2012) Standard Specification for Steel Bars, Alloys, for Nitriding
A400 - 69(2012) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A434 - 06(2012) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A499 - 89(2008) Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
A575 - 96(2013)e1 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576 - 90b(2012) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A663 / A663M - 12 Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A675 / A675M - 03(2009)
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A689 - 97(2013)e1 Standard Specification for Carbon and Alloy Steel Bars for Springs
A696 - 90a(2012)
Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A702 - 13 Standard Specification for Steel Fence Posts, Hot Wrought
A739 - 90a(2012)
Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A914 / A914M - 92(2011)
Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A920 / A920M - 07 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A921 / A921M - 93(2011)
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
A1040 - 10
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1075 - 12 Standard Specification for Flanged Steel U-Channel Posts
E618 - 07(2013)
Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine
23 | P a g e
Bearing Steels
Designation Title
A295 / A295M - 09 Standard Specification for High-Carbon Anti-Friction Bearing Steel
A485 - 09 Standard Specification for High Hardenability Antifriction Bearing Steel
A534 - 09 Standard Specification for Carburizing Steels for Anti-Friction Bearings
A756 - 09 Standard Specification for Stainless Anti-Friction Bearing Steel
A866 - 09 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A892 - 09 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
E588 - 03(2009) Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
Carbon Steel Tubular Products
Designation Title
A53 / A53M - 12 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A106 / A106M - 13 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A134 - 96(2012) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A135 / A135M - 09 Standard Specification for Electric-Resistance-Welded Steel Pipe
A139 / A139M - 04(2010)
Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A178 / A178M - 02(2012)
Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A179 / A179M - 90a(2012)
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A192 / A192M - 02(2012)
Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A210 / A210M - 02(2012)
Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A214 / A214M - 96(2012)
Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A252 - 10 Standard Specification for Welded and Seamless Steel Pipe Piles
A254 / A254M - 12 Standard Specification for Copper-Brazed Steel Tubing
A381 - 96(2012) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A423 / A423M - 09 Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A450 / A450M - 10 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
A498 - 06 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
A500 / A500M - 13
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501 - 07 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A512 - 06(2012) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A513 / A513M - 12 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A519 - 06(2012) Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A523 - 96(2012)
Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
A524 - 96(2012) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A530 / A530M - 12 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A556 / A556M - 96(2012)
Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A587 - 96(2012) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
24 | P a g e
Designation Title
A589 / A589M - 06(2012)
Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A595 / A595M - 11 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A618 / A618M - 04(2010)
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A671 / A671M - 13e1 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A672 / A672M - 09e1
Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A691 / A691M - 09e1
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A714 - 99(2009)e1 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
A733 - 13 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A787 / A787M - 09 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A795 / A795M - 13
Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A822 / A822M - 04(2010)
Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A847 / A847M - 12
Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A865 / A865M - 06(2012)
Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A972 / A972M - 00(2010)
Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A984 / A984M - 03(2009)
Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
A1005 / A1005M - 00(2010)
Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
A1006 / A1006M - 00(2010)
Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
A1020 / A1020M - 02(2012)
Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
A1024 / A1024M - 02(2012)
Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
A1037 / A1037M - 05(2012)
Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded
A1065 / A1065M - 09
Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
A1076 / A1076M - 13
Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
A1085 - 13 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
Castings
Designation Title
A27 / A27M - 13 Standard Specification for Steel Castings, Carbon, for General Application
A99 - 03(2009) Standard Specification for Ferromanganese
A100 - 07(2012) Standard Specification for Ferrosilicon
A101 - 04(2009) Standard Specification for Ferrochromium
A102 - 04(2009) Standard Specification for Ferrovanadium
A128 / A128M - 93(2012)
Standard Specification for Steel Castings, Austenitic Manganese
25 | P a g e
Designation Title
A132 - 04(2009) Standard Specification for Ferromolybdenum
A144 - 04(2009) Specification for Ferrotungsten
A146 - 04(2009) Standard Specification for Molybdenum Oxide Products
A148 / A148M - 08 Standard Specification for Steel Castings, High Strength, for Structural Purposes
A216 / A216M - 12 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A217 / A217M - 12
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A297 / A297M - 10
Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A323 - 05(2010) Standard Specification for Ferroboron
A324 - 08(2013) Standard Specification for Ferrotitanium
A351 / A351M - 13a Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
A352 / A352M - 06(2012)
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A356 / A356M - 11
Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A389 / A389M - 13
Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A426 / A426M - 13 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A447 / A447M - 11
Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A451 / A451M - 06(2010)
Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A481 - 05(2010) Standard Specification for Chromium Metal
A482 / A482M - 11 Standard Specification for Ferrochrome-Silicon
A483 / A483M - 10 Standard Specification for Silicomanganese
A487 / A487M - 93(2012)
Standard Specification for Steel Castings Suitable for Pressure Service
A488 / A488M - 12 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A494 / A494M - 13 Standard Specification for Castings, Nickel and Nickel Alloy
A495 - 06(2010) Standard Specification for Calcium-Silicon Alloys
A550 - 06(2010) Standard Specification for Ferrocolumbium
A560 / A560M - 12 Standard Specification for Castings, Chromium-Nickel Alloy
A601 / A601M - 10 Standard Specification for Electrolytic Manganese Metal
A608 / A608M - 12
Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A609 / A609M - 12
Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A610 - 79(2009) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A636 - 08(2013) Standard Specification for Nickel Oxide Sinter
A660 / A660M - 11 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A701 / A701M - 10 Standard Specification for Ferromanganese-Silicon
A703 / A703M - 13a Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A732 / A732M - 09
Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A743 / A743M - 13a
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744 / A744M - 13 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
26 | P a g e
Designation Title
A747 / A747M - 12 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A757 / A757M - 10
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A781 / A781M - 13a Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A799 / A799M - 10 Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A800 / A800M - 10 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
A802 / A802M - 95(2010)e1
Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A835 / A835M - 10 Standard Specification for Sizes of Ferroalloys and Alloy Additives
A872 / A872M - 07a(2012)
Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A890 / A890M - 13
Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A903 / A903M - 99(2012)
Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A915 / A915M - 08(2013)
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A922 - 05(2010) Standard Specification for Silicon Metal
A957 / A957M - 13
Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A958 / A958M - 10
Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A985 / A985M - 13 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A990 / A990M - 11e01
Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A995 / A995M - 13 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A997 - 08(2012) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
A1001 - 01(2010) Standard Specification for High Strength Steel Castings in Heavy Sections
A1002 - 10 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
A1025 / A1025M - 10 Standard Specification for Ferroalloys, General Requirements
A1062 - 10 Standard Specification for Steel Castings Sampling
A1067 / A1067M - 12a Standard Specification for Test Coupons for Steel Castings
A1080 - 12 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
Chain Link Fence and Wire Accessories
Designation Title
A392 - 11a Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A491 - 11 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A824 - 01(2012) Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
F552 - 02(2013) Standard Terminology Relating to Chain Link Fencing
F567 - 11a Standard Practice for Installation of Chain-Link Fence
F626 - 08(2013) Standard Specification for Fence Fittings
F654 - 07(2012) Standard Specification for Residential Chain Link Fence Gates
F668 - 11
Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
F900 - 11 Standard Specification for Industrial and Commercial Swing Gates
27 | P a g e
Designation Title
F934 - 96(2013) Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
F1043 - 13 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
F1083 - 13 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
F1183 - 96(2011) Standard Specification for Aluminum Alloy Chain Link Fence Fabric
F1184 - 05(2010) Standard Specification for Industrial and Commercial Horizontal Slide Gates
F1345 - 10a Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
F1379 - 95(2013) Standard Terminology Relating to Barbed Tape
F1553 - 11 Standard Guide for Specifying Chain Link Fence
F1664 - 08(2013)
Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
F1665 - 08(2013)
Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
F1910 - 98(2013) Standard Specification for Long Barbed Tape Obstacles
F1911 - 05(2010) Standard Practice for Installation of Barbed Tape
F3000 / F3000M - 13
Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats
Computer Applications
Designation Title
F1716 - 96(2008)
Standard Guide for Transition and Performance of Marine Software Systems Maintenance
F1756 - 97a(2008)
Standard Guide for Implementation of a Fleet Management System Network
F1757 - 96(2008)
Standard Guide for Digital Communication Protocols for Computerized Systems
F2001 - 01(2006)
Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record
F2017 - 00(2006)
Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration
F2218 - 02(2008)
Standard Guide for Hardware Implementation for Computerized Systems
F2446 - 04(2010)
Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
Corrugated Steel Pipe Specifications
Designation Title
A742 / A742M - 13 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A760 / A760M - 13 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A761 / A761M - 13b
Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A762 / A762M - 08 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A796 / A796M - 13a
Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A798 / A798M - 13 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A807 / A807M - 13 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A849 - 10
Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A862 / A862M - 98(2008)
Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
28 | P a g e
Designation Title
A926 - 03(2008) Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A930 - 09
Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A964 / A964M - 03(2011)
Standard Specification for Corrugated Steel Box Culverts
A978 / A978M - 08(2013)
Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A979 / A979M - 03(2009)
Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A998 / A998M - 12
Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
A1042 / A1042M - 04(2009)
Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains
Editorial
Designation Title
A994 - 13 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
E527 - 12 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
Editorial and Terminology
Designation Title
A902 - 13b Standard Terminology Relating to Metallic Coated Steel Products
Electrical
Designation Title
F1003 - 02(2012)e1
Standard Specification for Searchlights on Motor Lifeboats
F1014 - 02(2012)e1
Standard Specification for Flashlights on Vessels
F1134 - 12 Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
F1198 - 92(2012)e1
Standard Guide for Shipboard Fire Detection Systems
F1207M - 12
Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]
F1507 - 99(2011) Standard Specification for Surge Suppressors for Shipboard Use
F1669M - 12 Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]
F1755M - 96(2012)e1
Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]
F1835 - 97(2012)e1
Standard Guide for Cable Splicing Installations
F1836M - 09(2013)
Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
F1837M - 97(2012)e1
Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
F1883 - 03(2013) Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units
F2044 - 09(2013) Standard Specification for Liquid Level Indicating Equipment, Electrical
F2045 - 00(2011) Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
F2046 - 00(2011) Standard Specification for Tachometers, Various
F2070 - 00(2011) Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
29 | P a g e
Designation Title
F2071 - 00(2011) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
F2361 - 03(2013)
Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
F2362 - 03(2013) Standard Specification for Temperature Monitoring Equipment
Flat-Rolled and Wrought Stainless Steel
Designation Title
A167 - 99(2009) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A176 - 99(2009) Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
A240 / A240M - 13c
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A276 - 13a Standard Specification for Stainless Steel Bars and Shapes
A313 / A313M - 13 Standard Specification for Stainless Steel Spring Wire
A314 - 13a Standard Specification for Stainless Steel Billets and Bars for Forging
A368 - 95a(2013) Standard Specification for Stainless Steel Wire Strand
A478 - 97(2013) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A479 / A479M - 13b Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480 / A480M - 13b
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A484 / A484M - 13a Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A492 - 95(2013) Standard Specification for Stainless Steel Rope Wire
A493 - 09(2013) Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A555 / A555M - 05(2009)
Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A564 / A564M - 13 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A565 / A565M - 10 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A580 / A580M - 13b Standard Specification for Stainless Steel Wire
A581 / A581M - 95b(2009)
Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A582 / A582M - 12e1 Standard Specification for Free-Machining Stainless Steel Bars
A638 / A638M - 10
Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A666 - 10 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A693 - 13 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A705 / A705M - 13 Standard Specification for Age-Hardening Stainless Steel Forgings
A793 - 96(2009) Standard Specification for Rolled Floor Plate, Stainless Steel
A887 - 89(2009) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A895 - 89(2009) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A947M - 13 Standard Specification for Textured Stainless Steel Sheet [Metric]
A959 - 11 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A968 / A968M - 96(2009)
Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
A1010 / A1010M - 13 Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
A1028 - 03(2009) Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
A1069 / A1069M - 11 Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
30 | P a g e
General Requirements
Designation Title
F906 - 85(2007) Standard Specification for Letters and Numerals for Ships
F956 - 91(2012) Standard Specification for Bell, Cast, Sound Signalling
F957 - 91(2012) Standard Specification for Gong, Sound Signaling
F1097 - 91(2012) Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)
F1099M - 98(2011) Standard Specification for Rat Guards, Ship's (Metric)
F1138 - 98(2014) Standard Specification for Spray Shields for Mechanical Joints
F1145 - 05(2011) Standard Specification for Turnbuckles, Swaged, Welded, Forged
F1166 - 07(2013) Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
F1179 - 88(2007) Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
F1182 - 07(2013) Standard Specification for Anodes, Sacrificial Zinc Alloy
F1270 - 97(2013) Standard Practice for Preparing and Locating Emergency Muster Lists
F1297 - 90(2012) Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment
F1312 - 90(2013) Standard Specification for Brick, Insulating, High Temperature, Fire Clay
F1332 - 99(2011)
Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10)
F1337 - 10
Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities
F1347 - 91(2012) Standard Specification for Manually Operated Fueling Hose Reels
F1348 / F1348M - 91(2013)
Standard Specification for Pneumatic Rotary Descaling Machines
F1546M - 96(2012)e1 Standard Specification for Fire Hose Nozzles
F1546 - 96(2012)e1 Standard Specification for Fire Hose Nozzles
F1547 - 09 Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding
F1808 - 03(2013) Standard Guide for Weight Control Technical Requirements for Surface Ships
F1878 - 98(2009) Standard Guide for Escort Vessel Evaluation and Selection
F1994 - 99(2011) Standard Test Method for Shipboard Fixed Foam Firefighting Systems
F2016 - 00(2012)
Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings
F2039 - 00(2012) Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program
F2192 - 05(2011) Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders
F2876 - 10
Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications
High Security Fences and Perimeter Barriers
Designation Title
F1712 - 11 Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications
F2548 - 12 Standard Specification for Expanded Metal Fence Systems for Security Purposes
F2611 - 11 Standard Guide for Design and Construction of Chain Link Security Fencing
F2780 - 09 Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers
F2781 - 10 Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems
F2814 - 09 Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
Insulation/Processes
Designation Title
F683 - 10 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
31 | P a g e
Designation Title
F2087 - 13 Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick
F2154 - 13 Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced
F2168 - 13
Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
F2191 / F2191M - 13 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
F2877 / F2877M - 13e1
Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
Machinery and Piping Systems
Designation Title
F681 - 82(2008) Standard Practice for Use of Branch Connections
F682 - 82a(2008) Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
F704 - 81(2009) Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
F707 / F707M - 94(2011)
Standard Specification for Modular Gage Boards
F708 - 92(2008) Standard Practice for Design and Installation of Rigid Pipe Hangers
F721 - 81(2008) Standard Specification for Gage Piping Assemblies
F722 - 82(2008) Standard Specification for Welded Joints for Shipboard Piping Systems
F841 - 84(2011) Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels
F856 - 97(2008) Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)
F885 - 84(2011) Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS ¼ to 2
F986 - 86(2008) Standard Specification for Suction Strainer Boxes
F992 - 86(2011) Standard Specification for Valve Label Plates
F993 - 86(2011) Standard Specification for Valve Locking Devices
F994 - 86(2011) Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections
F998 - 12 Standard Specification for Centrifugal Pump, Shipboard Use
F1000 - 13 Standard Practice for Piping System Drawing Symbols
F1005 - 91(2013) Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration
F1006 - 86(2008) Standard Specification for Entrainment Separators for Use in Marine Piping Applications
F1007 - 86(2007) Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
F1020 - 86(2011) Standard Specification for Line-Blind Valves for Marine Applications
F1030 - 86(2008) Standard Practice for Selection of Valve Operators
F1075 - 97(2008) Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
F1076 - 87(2010) Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
F1098 - 87(2010) Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24
F1120 - 87(2010) Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
F1121 - 87(2010) Standard Specification for International Shore Connections for Marine Fire Applications
F1122 - 04(2010) Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
F1123 - 87(2010) Standard Specification for Non-Metallic Expansion Joints
F1139 - 88(2010) Standard Specification for Steam Traps and Drains
F1155 - 10 Standard Practice for Selection and Application of Piping System Materials
F1172 - 88(2010) Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
F1173 - 01(2012) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
F1199 - 88(2010)
Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
32 | P a g e
Designation Title
F1200 - 88(2010) Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
F1201 - 88(2010) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
F1245 - 89(2012) Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
F1271 - 90(2012) Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
F1273 - 91(2013) Standard Specification for Tank Vent Flame Arresters
F1298 - 90(2012) Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
F1311 - 90(2012) Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges
F1330 - 91(2012) Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe
F1333 - 91(2013) Standard Specification for Construction of Fire and Foam Station Cabinets
F1338 - 91(2013)
Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly
F1370 - 92(2011) Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
F1386 - 92(2010) Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding
F1387 - 99(2012) Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
F1431 - 92(2010) Standard Specification for Water Trap for Diesel Exhaust
F1433 - 97(2010) Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
F1476 - 07(2013) Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
F1508 - 96(2010) Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
F1510 - 07(2013) Standard Specification for Rotary Positive Displacement Pumps, Ships Use
F1511 - 13 Standard Specification for Mechanical Seals for Shipboard Pump Applications
F1548 - 01(2012)
Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
F1565 - 00(2013) Standard Specification for Pressure-Reducing Valves for Steam Service
F1567 - 94(2013) Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
F1685 - 00(2013) Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems
F1718 - 01(2013) Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
F1791 - 00(2013) Standard Specification for Filters Used in Air or Nitrogen Systems
F1792 - 97(2010) Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
F1793 - 97(2010)
Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service
F1794 - 97(2010)
Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
F1795 - 00(2013) Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
F1985 - 99(2011) Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves
F2014 - 00(2013) Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
F2015 - 00(2013) Standard Specification for Lap Joint Flange Pipe End Applications
F2798 - 09 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
F2934 - 12 Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
Marine Environmental Protection
Designation Title
F1322 - 90(2009) Standard Guide for Selection of Shipboard Incinerators
F1323 - 08 Standard Specification for Shipboard Incinerators
F1799 - 97(2009) Standard Guide for Shipboard Generated Waste Management Audits
F2283 - 12 Standard Specification for Shipboard Oil Pollution Abatement System
33 | P a g e
Designation Title
F2363 / F2363M - 12 Standard Specification for Sewage and Graywater Flow Through Treatment Systems
Mechanical and Chemical Testing and Processing Methods of Steel Products and Processes
Designation Title
A370 - 12a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A751 - 11 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A991 / A991M - 10
Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A1033 - 10
Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
A1058 - 12b Standard Test Methods for Mechanical Testing of Steel Products—Metric
Methods of Corrosion Testing
Designation Title
A262 - 13 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A380 / A380M - 13 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A763 - 93(2009) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A923 - 08 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
A967 / A967M - 13 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A1084 - 13 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
Methods of Testing
Designation Title
A90 / A90M - 13 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A239 - 95(2009)e1 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A309 - 01(2012) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A428 / A428M - 10 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A754 / A754M - 11 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A1030 / A1030M - 11
Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
A1073 / A1073M - 14
Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet
A1087 / A1087M - 13
Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet
Other Fence Systems and Components
Designation Title
F537 - 01(2007) Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
F2630 - 07 Standard Guide for Self-Closing/Self-Latching General-Purpose Gates
Outfitting and Deck Machinery
Designation Title
F670 - 02(2012) Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing
F765 - 93(2012)e1 Standard Specification for Wildcats, Ship Anchor Chain
34 | P a g e
Designation Title
F782 - 01(2012) Standard Specification for Doors, Furniture, Marine
F783 - 88(2013) Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung
F821 / F821M - 01(2012)
Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine
F822 - 93(2010) Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
F823 - 93(2010) Standard Specification for Desk, Log, Marine, Steel, with Cabinet
F824 - 93(2010) Standard Specification for Tables, Mess, Marine, Steel
F825 - 93(2010) Standard Specification for Drawers, Furniture, Marine, Steel
F826 - 94(2010) Standard Specification for Tops, Furniture, Marine, Steel
F985 - 00(2012) Standard Specification for Panama Canal Pilot Platform
F987 - 04(2010) Standard Specification for Portable Intermediate Flush Deck Stanchion
F1018 - 87a(2010) Standard Specification for Steel Emergency Gear Stowage Locker
F1019M - 00(2012) Standard Specification for Steel Deck Gear Stowage Box [Metric]
F1068 - 90(2012) Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
F1069 - 87(2012)
Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
F1070 - 87(2012) Standard Specification for Doors, Non-Tight, for Marine Use
F1071 - 94(2012) Standard Specification for Expanded-Metal Bulkhead Panels
F1072 - 94(2012) Standard Specification for Expanded-Metal Doors
F1073 - 87(2012)
Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
F1074 - 87(2012) Standard Specification for Cleats, Welded Horn Type
F1085 - 10 Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
F1092 - 04(2010)
Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
F1106 - 87(2012) Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)
F1142 - 98(2012) Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight
F1143 - 98(2012) Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight
F1144 - 98(2012) Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged
F1196 - 00(2013) Standard Specification for Sliding Watertight Door Assemblies
F1197 - 00(2012) Standard Specification for Sliding Watertight Door Control Systems
F1244 - 08(2013) Standard Specification for Berths, Marine
F1309 - 98(2012) Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
F1331 - 91(2012)
Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces
F1385 - 07(2012) Standard Practice for Platforms in Cargo Tanks
F3040 / F3040M - 13 Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads
Rigid Polymer Fence Systems
Designation Title
F964 - 13 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
F1999 - 00(2006) Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
35 | P a g e
Sheet Specifications
Designation Title
A308 / A308M - 10 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A459 - 08(2013) Standard Specification for Zinc-Coated Flat Steel Armoring Tape
A463 / A463M - 10 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A653 / A653M - 13
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A755 / A755M - 11
Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A792 / A792M - 10 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A875 / A875M - 13 Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process
A879 / A879M - 12
Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A917 - 08
Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A918 - 06(2011)
Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A924 / A924M - 13 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A929 / A929M - 01(2013)
Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A1003 / A1003M - 13b
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1004 / A1004M - 99(2009)
Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
A1046 / A1046M - 10ae1
Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
A1057 / A1057M - 08
Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1063 / A1063M - 11a
Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1079 - 13e2
Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
Specific Applications
Designation Title
F969 - 11 Standard Practice for Construction of Chain-Link Tennis Court Fence
F1908 - 08(2013)
Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
F2000 - 10 Standard Guide for Fences for Baseball and Softball Fields
F2049 - 11
Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
F2200 - 13 Standard Specification for Automated Vehicular Gate Construction
F2409 - 10 Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas
F2631 - 07
Standard Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities
F2698 - 08(2013)
Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities
F2699 - 08(2013)
Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
36 | P a g e
Stainless and Alloy Steel Tubular Products
Designation Title
A209 / A209M - 03(2012)
Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A213 / A213M - 13
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A249 / A249M - 10a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A250 / A250M - 05(2009)
Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
A268 / A268M - 10
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A269 - 13 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A270 / A270M - 10 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A312 / A312M - 13b Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A333 / A333M - 13
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
A334 / A334M - 04a(2010)
Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A335 / A335M - 11 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A358 / A358M - 12
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A369 / A369M - 11 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A376 / A376M - 13 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
A409 / A409M - 13
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A511 / A511M - 12 Standard Specification for Seamless Stainless Steel Mechanical Tubing
A554 - 13 Standard Specification for Welded Stainless Steel Mechanical Tubing
A632 - 04(2009)
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A688 / A688M - 12 Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
A778 - 01(2009)e1 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A789 / A789M - 13ae1 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A790 / A790M - 13a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A803 / A803M - 12 Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
A813 / A813M - 09 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A814 / A814M - 08 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A908 - 03(2013) Standard Specification for Stainless Steel Needle Tubing
A928 / A928M - 13
Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A943 / A943M - 01(2009)
Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A949 / A949M - 01(2009)
Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A999 / A999M - 13 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
A1012 - 10
Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
A1015 - 01(2009) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
A1016 / A1016M - 13
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
37 | P a g e
Designation Title
A1047 / A1047M - 05(2009)
Standard Test Method for Pneumatic Leak Testing of Tubing
A1053 / A1053M - 12 Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
Steel Chain
Designation Title
A391 / A391M - 07(2012)
Standard Specification for Grade 80 Alloy Steel Chain
A413 / A413M - 07(2012)
Standard Specification for Carbon Steel Chain
A466 / A466M - 07(2012)
Standard Specification for Weldless Chain
A467 / A467M - 07(2012)
Standard Specification for Machine and Coil Chain
A906 / A906M - 02(2010)
Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A952 / A952M - 02(2010)
Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A973 / A973M - 07(2012)
Standard Specification for Grade 100 Alloy Steel Chain
Steel Forgings and Billets
Designation Title
A266 / A266M - 13 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
A275 / A275M - 08(2013)
Standard Practice for Magnetic Particle Examination of Steel Forgings
A288 - 91(2013)
Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A289 / A289M - 97(2013)
Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A290 / A290M - 05(2010)
Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A291 / A291M - 05(2010)
Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A336 / A336M - 10a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A372 / A372M - 13 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A388 / A388M - 11 Standard Practice for Ultrasonic Examination of Steel Forgings
A418 / A418M - 10 Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A427 / A427M - 10 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
A456 / A456M - 08(2013)
Standard Specification for Magnetic Particle Examination of Large CrankshaftForgings
A469 / A469M - 07(2012)
Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
A470 / A470M - 05(2010)
Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A471 / A471M - 09 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A472 / A472M - 07(2012)
Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
A473 - 13 Standard Specification for Stainless Steel Forgings
38 | P a g e
Designation Title
A503 / A503M - 01(2011)
Standard Specification for Ultrasonic Examination of Forged Crankshafts
A504 / A504M - 08(2013)
Standard Specification for Wrought Carbon Steel Wheels
A508 / A508M - 05b(2010)
Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A521 / A521M - 06(2011)
Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
A531 / A531M - 13 Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A541 / A541M - 05(2010)
Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A551 / A551M - 08(2013)
Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
A579 / A579M - 04a(2009)
Standard Specification for Superstrength Alloy Steel Forgings
A592 / A592M - 10
Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
A604 / A604M - 07(2012)
Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A646 / A646M - 06(2011)
Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A649 / A649M - 10 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A668 / A668M - 13e1 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A711 / A711M - 07(2012)
Standard Specification for Steel Forging Stock
A723 / A723M - 10 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A729 / A729M - 09e1 Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A745 / A745M - 12 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
A765 / A765M - 07(2012)
Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A768 / A768M - 05(2010)
Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A788 / A788M - 13 Standard Specification for Steel Forgings, General Requirements
A833 - 08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A837 / A837M - 06(2011)
Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A859 / A859M - 04(2009)
Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A891 / A891M - 10
Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A909 / A909M - 06(2011)
Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
A939 / A939M - 12 Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
A940 / A940M - 06(2011)
Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
A956 - 12 Standard Test Method for Leeb Hardness Testing of Steel Products
A965 / A965M - 13 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A966 / A966M - 08(2012)
Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A982 / A982M - 10 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
39 | P a g e
Designation Title
A983 / A983M - 06(2011)
Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A986 / A986M - 01(2011)
Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A1021 / A1021M - 05(2010)
Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
A1038 - 10a Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
A1048 / A1048M - 06(2011)
Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
A1049 / A1049M - 10
Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
Steel Forgings and Wrought Fittings for Piping Applications and Bolting Materials for Piping and Special Purpose Applications
Designation Title
A105 / A105M - 13
Standard Specification for Carbon Steel Forgings for Piping Applications
A181 / A181M - 13
Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A182 / A182M - 13a
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A193 / A193M - 12b
Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A194 / A194M - 13
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A234 / A234M - 13e1
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A320 / A320M - 11a
Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
A350 / A350M - 13
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A403 / A403M - 13a
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A420 / A420M - 13
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A437 / A437M - 12
Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
A453 / A453M - 12
Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A522 / A522M - 13
Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A540 / A540M - 11
Standard Specification for Alloy-Steel Bolting for Special Applications
A694 / A694M - 13
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A707 / A707M - 13
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A727 / A727M - 13
Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A758 / A758M - 13
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A774 / A774M - 13
Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
40 | P a g e
Designation Title
A815 / A815M - 13a
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A836 / A836M - 13
Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A858 / A858M - 13
Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
A860 / A860M - 13
Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
A960 / A960M - 13
Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A961 / A961M - 13
Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A962 / A962M - 13b
Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
A988 / A988M - 13
Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A989 / A989M - 13
Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A1014 / A1014M - 10
Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
A1082 / A1082M - 12
Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
Steel Plates for Boilers and Pressure Vessels
Designation Title
A20 / A20M - 13 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A203 / A203M - 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A204 / A204M - 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A225 / A225M - 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
A263 - 12 Standard Specification for Stainless Chromium Steel-Clad Plate
A264 - 12 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
A265 - 12 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A285 / A285M - 12 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A299 / A299M - 09 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A302 / A302M - 12
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A353 / A353M - 09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
A387 / A387M - 11 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A435 / A435M - 90(2012)
Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A455 / A455M - 12a Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A515 / A515M - 10
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A516 / A516M - 10 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A517 / A517M - 10 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A533 / A533M - 09e1
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A537 / A537M - 13 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A542 / A542M - 13
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
41 | P a g e
Designation Title
A543 / A543M - 09
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A553 / A553M - 10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
A562 / A562M - 10
Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
A577 / A577M - 90(2012)
Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578 / A578M - 07(2012)
Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
A612 / A612M - 12
Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A645 / A645M - 10 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A662 / A662M - 12
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A724 / A724M - 09(2013)
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
A734 / A734M - 12
Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
A735 / A735M - 12
Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
A736 / A736M - 12
Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel
A737 / A737M - 09(2013)
Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A738 / A738M - 12a
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A770 / A770M - 03(2012)
Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A832 / A832M - 10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A841 / A841M - 13
Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
A844 / A844M - 09
Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
A1017 / A1017M - 11
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
Steel Rails and Accessories
Designation Title
A1 - 00(2010) Standard Specification for Carbon Steel Tee Rails
A2 - 02(2008) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
A3 - 01(2012) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
A49 - 12
Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
A65 - 07(2013) Standard Specification for Steel Track Spikes
A66 - 07(2013) Standard Specification for Steel Screw Spikes
A67 - 00(2010) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
A183 - 03(2009)
Standard Specification for Carbon Steel Track Bolts and Nuts
A759 - 10 Standard Specification for Carbon Steel Crane Rails
42 | P a g e
Steel Reinforcement
Designation Title
A184 / A184M - 06(2011)
Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
A416 / A416M - 12a Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A421 / A421M - 10 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A615 / A615M - 13 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A648 - 12 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
A704 / A704M - 06(2011)
Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A706 / A706M - 13 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A722 / A722M - 12 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
A767 / A767M - 09 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A775 / A775M - 07b Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A779 / A779M - 12 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
A820 / A820M - 11 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A821 / A821M - 10 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
A881 / A881M - 10 Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties
A882 / A882M - 04a(2010)
Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
A884 / A884M - 12 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A886 / A886M - 12 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A910 / A910M - 12 Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
A911 / A911M - 11 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
A933 / A933M - 10 Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement
A934 / A934M - 13 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A944 - 10
Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A951 / A951M - 11 Standard Specification for Steel Wire for Masonry Joint Reinforcement
A955 / A955M - 12e1 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
A970 / A970M - 13a Standard Specification for Headed Steel Bars for Concrete Reinforcement
A981 / A981M - 11
Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
A996 / A996M - 09b Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A1022 / A1022M - 13 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
A1032 - 04(2010)
Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
A1034 / A1034M - 10a
Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
A1035 / A1035M - 13b
Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
A1044 / A1044M - 05(2010)
Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
A1055 / A1055M - 10e1
Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
A1060 / A1060M - 11e1
Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1061 / A1061M - 09 Standard Test Methods for Testing Multi-Wire Steel Strand
43 | P a g e
Designation Title
A1064 / A1064M - 13 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1078 / A1078M - 12 Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
A1081 / A1081M - 12 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
Steel Rod and Wire
Designation Title
A227 / A227M - 06(2011) Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A228 / A228M - 07 Standard Specification for Steel Wire, Music Spring Quality
A229 / A229M - 12 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
A230 / A230M - 05(2011)e1
Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
A231 / A231M - 10 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
A232 / A232M - 05(2011)e1
Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
A401 / A401M - 10 Standard Specification for Steel Wire, Chromium-Silicon Alloy
A407 - 07(2013) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
A510 / A510M - 13
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
A679 / A679M - 06(2012) Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A713 - 04(2010) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
A853 - 04(2010) Standard Specification for Steel Wire, Carbon, for General Use
A877 / A877M - 10e1
Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
A878 / A878M - 05(2011) Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A899 - 91(2007) Standard Specification for Steel Wire, Epoxy-Coated
A905 - 04(2010) Standard Specification for Steel Wire, Pressure Vessel Winding
A931 - 08(2013) Standard Test Method for Tension Testing of Wire Ropes and Strand
A938 - 07(2013) Standard Test Method for Torsion Testing of Wire
A1000 / A1000M - 11 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A1007 - 07 Standard Specification for Carbon Steel Wire for Wire Rope
A1023 / A1023M - 09e1 Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
Steel Sheet and Strip
Designation Title
A109 / A109M - 13
Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A414 / A414M - 13
Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
A424 / A424M - 09a
Standard Specification for Steel, Sheet, for Porcelain Enameling
A505 - 12 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A506 - 12 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A507 - 12 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A568 / A568M - 13ae1
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A606 / A606M - 09a
Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
44 | P a g e
Designation Title
A635 / A635M - 13
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A659 / A659M - 12
Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A684 / A684M - 12
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A749 / A749M - 08
Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A794 / A794M - 12
Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
A805 / A805M - 09
Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A980 / A980M - 11
Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A1008 / A1008M - 13
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
A1011 / A1011M - 13
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1018 / A1018M - 10
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1031 / A1031M - 12
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
A1039 / A1039M - 13
Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
A1083 / A1083M - 12
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
A1088 - 13
Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)
F1267 - 12 Standard Specification for Metal, Expanded, Steel
Structural Shapes and Hardware Specifications
Designation Title
A123 / A123M - 13 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A143 / A143M - 07
Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A153 / A153M - 09 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A384 / A384M - 07(2013)
Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A385 / A385M - 11 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A780 / A780M - 09 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A896 / A896M - 09 Standard Practice for Conducting Case Studies on Galvanized Structures
A1059 / A1059M - 08(2013)
Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
A1068 - 10 Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
A1072 / A1072M - 11 Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
A1074 - 11 Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
45 | P a g e
Structural Steel for Bridges, Buildings, Rolling Stock and Ships
Designation Title
A6 / A6M - 13a Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A36 / A36M - 12 Standard Specification for Carbon Structural Steel
A131 / A131M - 13 Standard Specification for Structural Steel for Ships
A242 / A242M - 13 Standard Specification for High-Strength Low-Alloy Structural Steel
A283 / A283M - 13 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A328 / A328M - 13a Standard Specification for Steel Sheet Piling
A514 / A514M - 13 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A529 / A529M - 05(2009)
Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A572 / A572M - 13a Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A573 / A573M - 13 Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A588 / A588M - 10
Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A633 / A633M - 13 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A656 / A656M - 13 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A673 / A673M - 07(2012)
Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A690 / A690M - 13a
Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
A709 / A709M - 13a Standard Specification for Structural Steel for Bridges
A710 / A710M - 02(2013)
Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A769 / A769M - 05(2010)
Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
A786 / A786M - 05(2009)
Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A827 / A827M - 11 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
A829 / A829M - 11 Standard Specification for Alloy Structural Steel Plates
A830 / A830M - 13
Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A857 / A857M - 07(2013)
Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A871 / A871M - 12
Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A898 / A898M - 07(2012)
Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A913 / A913M - 11
Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process
A945 / A945M - 06(2011)
Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A950 / A950M - 11 Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A992 / A992M - 11 Standard Specification for Structural Steel Shapes
A1043 / A1043M - 05(2009)
Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
A1066 / A1066M - 11
Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
A1077 / A1077M - 12
Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
46 | P a g e
Structures
Designation Title
F718 - 07(2011)e1
Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
F940 - 99(2013)
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
F941 - 99(2013)
Standard Practice for Inspection of Marine Surface Preparation and Coating Application
F1130 - 99(2014)
Standard Practice for Inspecting the Coating System of a Ship
F1178 - 11 Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
F1321 - 13e1
Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
F1455 - 92(2011)
Standard Guide for Selection of Structural Details for Ship Construction
F2935 - 12 Standard Specification for Chocks, Panama, Mooring Cast Steel
F2936 - 12 Standard Specification for Chocks, Ship Mooring, Cast Steel
F2991 - 13 Standard Guide for Doubler Plate Repairs for Non-Classed Ship Structures
F3052 - 14
Standard Guide for Conducting Small Boat Stability Test (Deadweight Survey and Air Inclining Experiment) to Determine Lightcraft Weight and Centers of Gravity of a Small Craft
Terminology
Designation Title
A941 - 13b Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
Tin Mill Products
Designation Title
A599 / A599M - 07(2012) Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A623 - 11 Standard Specification for Tin Mill Products, General Requirements
A623M - 11 Standard Specification for Tin Mill Products, General Requirements [Metric]
A624 / A624M - 13 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A625 / A625M - 13 Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
A626 / A626M - 13 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A630 - 03(2009) Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A650 / A650M - 13 Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A657 / A657M - 13
Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A987 / A987M - 09 Standard Practice for Measuring Shape Characteristics of Tin Mill Products
Tool Steels
Designation Title
A561 - 08 Standard Practice for Macroetch Testing of Tool Steel Bars
A597 - 87(2010) Standard Specification for Cast Tool Steel
A600 - 92a(2010) Standard Specification for Tool Steel High Speed
A681 - 08 Standard Specification for Tool Steels Alloy
A686 - 92(2010) Standard Specification for Tool Steel, Carbon
Wire Specifications
47 | P a g e
Designation Title
A111 - 99a(2009) Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
A116 - 11 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
A121 - 13 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
A363 - 03(2009)e1 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A390 - 06(2011)
Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A411 - 08(2013) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A460 - 11 Standard Specification for Copper-Clad Steel Wire Strand
A474 - 03(2013) Standard Specification for Aluminum-Coated Steel Wire Strand
A475 - 03(2009)e1 Standard Specification for Zinc-Coated Steel Wire Strand
A586 - 04a(2009)e1 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
A603 - 98(2009)e1 Standard Specification for Zinc-Coated Steel Structural Wire Rope
A640 - 97(2009)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A641 / A641M - 09a Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A740 - 98(2008) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A741 - 11e1 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
A764 - 07(2012)
Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A809 - 08(2013) Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A810 - 01(2009)e1 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A817 - 12
Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A818 - 06(2010) Standard Specification for Coppered Carbon Steel Wire
A854 / A854M - 08(2013)
Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A855 / A855M - 03(2009)
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A856 / A856M - 03(2009)
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A925 - 03(2009)e1 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A974 - 97(2011)
Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A975 - 11
Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
48 | P a g e
DIN Standards
Deutsches Institut für Normung
"DIN" redirects here. For other uses, see Din (disambiguation).
Deutsches Institut für Normung e.V. (DIN; in English, the German Institute for Standardization) is
the German national organization for standardization and is that country's ISO member body. DIN is a
Registered German Association (e.V.) headquartered in Berlin. There are currently around thirty
thousand DIN Standards, covering nearly every field of technology.
Founded in 1917 as the Normenausschuß der deutschen Industrie (NADI, "Standardisation Committee
of German Industry"), the NADI was renamed Deutscher Normenausschuß (DNA, "German
Standardisation Committee") in 1926 to reflect that the organization now dealt with standardization
issues in many fields; viz., not just for industrial products. In 1975 it was renamed again to Deutsches
Institut für Normung, or 'DIN' and is recognized by the German government as the official national-
standards body, representing German interests at the international and European levels.
The acronym, 'DIN,' is often incorrectly expanded as Deutsche Industrienorm ("German Industry
Standard"). This is largely due to the historic origin of the DIN as "NADI". The NADI indeed published
their standards as DI-Norm (Deutsche Industrienorm). For example, the first published standard was 'DI-
Norm 1' (about tapered pins) in 1918. Many people still mistakenly associate DIN with the old DI-
Normnaming convention.
One of the earliest, and probably the most well-known, is DIN 476 — the standard that introduced the A-series paper sizes in 1922 —
adopted in 1975 as International Standard ISO 216. Common examples in modern technology include DIN and mini-DIN connectors.
1. DIN standard designation
The designation of a DIN standard shows its origin (# denotes a number):
DIN # is used for German standards with primarily domestic significance or designed as a first step toward international status. E
DIN # is a draft standard and DIN V # is a preliminary standard.
DIN EN # is used for the German edition of European standards.
DIN ISO # is used for the German edition of ISO standards.
2. List of DIN standards
1. DIN 1 to DIN 999[edit]
DIN 1 to DIN 99[edit]
DIN TITLE
DIN 1 Cone Pins, untempered
DIN 3 Standard measurements
DIN 5 Technical drawings - Axonometric projections, Isometric projection
DIN 5-10 Technical drawings - projections, terms
DIN 6 Projection displays in Normal, views and special presentations
DIN 7 Parallel Pins
DIN 11 Whitworth pipe threads 1/4"-6" Thread diameter, sizes, teaching information
DIN 13-1 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
DIN 13-2
ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal
diameter from 1 mm to 50 mm
DIN 13-3
ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to
90 mm
Logo of the German Institute for Standardization.
Head office of the German Institute for Standardization in Berlin-Tiergarten.
49 | P a g e
DIN TITLE
DIN 13-4
ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to
110 mm
DIN 13-5
ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from
7,5 mm to 200 mm
DIN 13-6
ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to
300 mm
DIN 13-7
ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to
300 mm
DIN 13-8
ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to
300 mm
DIN 13-9
ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to
300 mm
DIN 13-10
ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to
500 mm
DIN 13-11
ISO general purpose metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to
1000 mm
DIN 13-12
ISO general purpose metric screw threads - Part 12: 1 to 300 mm diameter coarse and fine pitch threads Selected diameters and
pitches
DIN 13-13
ISO general purpose metric screw threads - Part 13: Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter
and limits of sizes
DIN 13-19 ISO general purpose metric screw threads - Part 19: Nominal profiles
DIN 13-20
ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the preferred tolerance classes;
nominal sizes from 1 mm to 68 mm
DIN 13-21
ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes;
Nominal diameter from 1 mm to 24,5 mm
DIN 13-22
ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the preferred tolerance classes;
Nominal diameter from 25 mm to 52 mm
DIN 13-23
ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the preferred tolerance classes;
Nominal diameter from 53 mm to 110 mm
DIN 13-24
ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the preferred tolerance classes;
Nominal diameter from 112 mm to 180 mm
DIN 13-25
ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the preferred tolerance classes;
Nominal diameter from 182 mm to 250 mm
DIN 13-26
ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the preferred tolerance classes;
Nominal diameter from 252 mm to 1000 mm
DIN 13-28
ISO general purpose metric screw threads - Part 28: Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter;
Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles
DIN 13-50 ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
DIN 13-51
ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference
fit); tolerances, limit deviations, limits of sizes
DIN 13-52 ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile
DIN 16 Oblique Standard Typeface for Drawings
DIN 17 Upright Standard Typeface for Drawings
DIN 76-1 Thread run-outs and threadundercuts for ISO metric threads in accordance with DIN 13-1
DIN 76-2 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
DIN 76-3 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
DIN 78 Protrusions of bolt ends
DIN 84 Product grade A slotted cheese head screws
DIN 85 Product grade A slotted pan head screws
DIN 93 Tab washers with long tab
50 | P a g e
DIN TITLE
DIN 94 Split pins
DIN 95 Slotted Raised Countersunk (Oval) Head Wood Screws
DIN 96 Slotted Round Head Wood Screws
DIN 100 to DIN 199
DIN TITLE
DIN 103-1 ISO Metric Trapezoidal Screw Thread; Profiles
DIN 103-2 ISO Metric Trapezoidal Screw Thread; General Plan
DIN 103-3 ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose
DIN 103-4 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 103-5 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
DIN 103-6 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
DIN 103-7 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
DIN 103-8 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
DIN 103-9 ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
DIN V 105-1 Clay masonry units - Part 1: Solid and hollow bricks with density classes of 1,2
DIN V 105-2 Clay masonry units - Part 2: Solid and hollow bricks with density classes equal 1.0
DIN 105-3 Clay masonry units - Part 3: Tile and high strength-high-strength clinker
DIN 105-4 Clay masonry units - Part 4: Ceramic bricks
DIN 105-5 Clay masonry units - Part 5: Lightweight long-hole brick and light long-hole brick panels
DIN V 105-6 Clay masonry units - Part 6: High precision units
DIN V 105-100 Clay masonry units - Part 100: Clay masonry units with specific properties
DIN 125 Washers; medium type, primarily for hexagon bolts
DIN 125-1 Product grade A washers - with a hardness up to 250 HV designed for use with hexagon head bolts and nuts
DIN 125-2 Product grade A washers - with a hardness up to 300 HV designed for use with hexagon head bolts and nuts
DIN 126 Product grade C washers - designed for use with hexagon head bolts and nut
DIN 127 Spring lock washers with square ends or tang ends
DIN 128 Curved and wave spring lock washers
DIN 137 Spring washers, curved or wave
DIN 200 to DIN 299
DIN TITLE
DIN 201 Technical drawings; Hatchings; Representation of cutting edges and materials
DIN 209 Machine Reamers with Screwed-on Blades
DIN 267-1 Fasteners - Part 1: Technical delivery conditions; General requirements
DIN 267-2
Fasteners - Part 2: Technical delivery conditions; Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Types and
Dimensional Accuracy
DIN 267-3
Fasteners - Part 3: Technical delivery conditions; Property classes for carbon steel and alloy steel bolts and screws; Conversion of
property classes
DIN 267-4 Fasteners - Part 4: Technical delivery conditions; Property classes for nuts (previous classes)
DIN 267-5 Fasteners – Part 5: Technical delivery conditions; Acceptance inspection; modified version of ISO 3269, 1984 edition
DIN 267-6 Fasteners - Part 6: Technical delivery conditions; Designs and accuracy of measurement for product grade F
DIN 267-7 Fasteners - Part 9: Technical delivery conditions; Bolts made of unalloyed or low-alloy steels
DIN 267-9 Fasteners - Part 9: Technical delivery conditions; Components with Electroplated Coatings
DIN 267-10 Fasteners - Part 10: Technical delivery conditions; Hot dip galvanized parts
DIN 267-11 Fasteners - Part 11: Technical delivery conditions (with additions to ISO 3506); Corrosion-resistant stainless steel fasteners
51 | P a g e
DIN TITLE
DIN 267-12 Fasteners - Part 12: Technical delivery conditions; Self-tapping screws
DIN 267-13
Fasteners - Part 13: Technical delivery conditions; Components for Bolted Connections Made Mainly from Materials Exhibiting a
High Impact Strength at Low Temperature or from Materials with a High Temperature Strength
DIN 267-15 Fasteners - Part 15: Technical delivery conditions; Prevailing torque type nuts
DIN 267-18 Fasteners - Part 18: Technical delivery conditions; Components made of Non-ferrous Metals
DIN 267-19 Fasteners - Part 19: Technical delivery conditions; Surface discontinuities on bolts and screws
DIN 267-20 Fasteners - Part 20: Technical delivery conditions; Surface discontinuities on nuts
DIN 267-21 Fasteners - Part 21: Technical delivery conditions; Widening test on nuts
DIN 267-23 Fasteners - Part 23: Technical delivery conditions; Property classes for nuts with fine thread (ISO classes)
DIN 267-24 Fasteners - Part 24: Technical delivery conditions; Property classes for nuts (Hardness classes)
DIN 267-25 Fasteners - Part 25: Technical delivery conditions; Torsion testing of M1 to M10 bolts and screws
DIN 267-26 Fasteners - Part 26: Technical delivery conditions; Conical spring washers for bolt/nut assemblies
DIN 267-27 Fasteners - Part 27: Technical specifications; Steel screws, bolts and studs with adhesive coating
DIN 267-28 Fasteners - Part 28: Technical specifications; Steel screws, bolts and studs with locking coating
DIN 267-29
Fasteners - Part 29: Technical specifications; Product grades for parts for bolted connections for use at temperatures ranging from -
200°C to +700°C
DIN 267-30 Fasteners - Part 30: Technical specifications; Metric thread rolling screws of property class 10.9
DIN 276-1 Building costs; Part 1: Building construction
DIN 276-2 Building costs; Part 2: Classification of cost
DIN 276-3 Building costs; Part 3: Ascertainment of cost
DIN 300 to DIN 399
DIN TITLE
DIN 315 Wing nuts with rounded wings
DIN 316 Wing screws with rounded wings
DIN 323-1 Preferred Numbers and Series of Preferred Numbers; Basic Values, Calculated Values, Rounded Values
DIN 323-2 Preferred Numbers and Series of Preferred Numbers; Introduction
DIN 332-1 60° centre holes; types R, A, B, and C
DIN 332-2 Center holes 60° with thread for shaft ends for rotating electrical machines
DIN 332-4 Centre holes for rail vehicles axles
DIN 332-7 Machine tools; 60° centre holes; dimensioning
DIN 332-8 Centre holes 90°, form S; dimensions, determination process
DIN 332-10 Center Holes; Indications on Technical Drawings
DIN 338 Parallel shank twist drills, jobber series
DIN 352 Sets of taps - Sets of 3 taps for metric coarseISO-threads M1 to M68
DIN 371
Machine taps with reinforced shank forcoarse pitchmetric ISO-threads M1 to M10 andfine pitchmetric ISO-threads M1 × 0,2 to M10
× 1,25
DIN 374 Machine screwing taps for fine pitch metric ISO-threads M3 × 0,2 to M52 × 4
DIN 400 to DIN 499
DIN TITLE
DIN 404 Slotted capstan screws
DIN 406-10 Engineering drawing practice; dimensioning; concepts and general principles
DIN 406-11 Engineering drawing practice; dimensioning; principles of application
DIN 406-12 Engineering drawing practice; dimensioning; tolerancing of linear and angular dimensions (modified version of ISO 406:1987)
DIN 417 Slotted set screws with long dog point
DIN 427 Slotted headless screws with chamfered end
52 | P a g e
DIN TITLE
DIN 428 Hexagon nuts, Grade C
DIN 433 Washers for use with cheese head screws
DIN 433-1 Product grade A washers - with a hardness up to 250 HV designed for use with cheese head screws
DIN 433-2 Product grade A washers - with a hardness up to 300 HV designed for use with cheese head screws
DIN 438 Slotted set screws with cup point
DIN 439 Hexagon thin nuts
DIN 439-1 Unchamfered hexagon thin nuts - Product grade B
DIN 439-2 Chamfered hexagon thin nuts - Product grades A and B
DIN 440 Washers for use in timber constructions
DIN 444 Eyebolts
DIN 461 Graphical Representation in Systems of Coordinates
DIN 462 Machine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner according to DIN 1804
DIN 464 Knurled thumb screws, high type
DIN 466 Knurled nuts, high type
DIN 467 Knurled nuts, low type
DIN 471 Circlips (retaining rings) for shafts; Normal type and heavy type
DIN 476 Paper sizes
DIN 476-2 Trimmed Sizes of Paper - C Series
DIN 477
DIN 479 Square head bolts with short dog point
DIN 500 to DIN 599
DIN TITLE
DIN 522 Metal washers; technical delivery conditions
DIN 548 Round nuts with set pin holes in side
DIN 551 Slotted set screws with flat point
DIN 553 Slotted set screws with cone point
DIN 555 M5 to M100x6 hexagon nuts - Product grade C
DIN 558 Hexagon head screws
DIN 580 Collar eyebolts for lifting purposes
DIN 600 to DIN 699
DIN TITLE
DIN 601 M5 to M52 hexagon head bolts; product grade C
DIN 603 Mushroom head square neck bolts
DIN 609 Hexagon fits bolts with long thread
DIN 625-1 Rolling bearings; single row radial contact ball bearings
DIN 625-3 Rolling bearings; double row radial contact ball bearings
DIN 625-4 Rolling bearings; radial contact groove ball bearings with flanged outer ring
DIN 653 Knurled thumb screws, low type
DIN 678-1 Envelopes - Part 1: Sizes
DIN 678-2 Envelopes - Part 2: Envelopes for Processing in Enveloping Machines, Size C6 to C4
DIN 700 to DIN 799
DIN TITLE
DIN 763 Tested, non-calibrated, long-link round steel chains
DIN 764-1 Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 3,5d
53 | P a g e
DIN TITLE
DIN 764-2 Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 3,5d
DIN 766 Calibrated and tested grade 3 round steel link chains
DIN 799-1 Foundation Blocks
DIN 800 to DIN 899
DIN TITLE
DIN12 820-1 Standards Work - Part 1: Principles
DIN 820-2 Standardization - Part 2: Presentation of standards; examples for presentation of figures, tables and part lists
DIN 820-3 Standardization - Pdfart 3: Concepts
DIN 820-4 Standardization - Part 4: Working procedure
DIN 820-11
Standardization - Part 11: Presentation of Standards concerning safety regulations which are VDE-Specifications or VDE-
Guidelines
DIN 820-12 Standardization - Part 12: Presentation of standards concerning safety regulations
DIN 820-13 Standardization - Part 13: Adoption of European documents of CEN, CENELEC and of ETSI; Concepts and presentation
DIN 820-15 Standardization - Part 15: Implementation of ISO and IEC international documents; Concepts and presentation
DIN 820-120 Standardization - Part 120: Guidelines for the inclusion of safety aspects in standards (ISO/IEC Guide 51:1999)
DIN 824 Technical drawings; Folding to filing size
DIN 899 Hand Operated Wrenches and Sockets; Technical Specifications
DIN 900 to DIN 999
DIN TITLE
DIN 908 Hexagon socket screw plugs with parallel screw thread
DIN 910 Hexagon-duty hexagon head screw plugs
DIN 911 Hexagon Socket Screw Keys
DIN 912 Hexagon socket head cap screws (modified version of ISO 4762)
DIN 913 Hexagon socket set screws with flat point (ISO 4026 modified)
DIN 914 Hexagon socket set screws with cone point (ISO 4029 modified)
DIN 915 Hexagon socket set screws with full dog point
DIN 916 Hexagon socket set screws with cup point (ISO 4029 modified)
DIN 918 Fasteners; Terminology; Spelling of terms; Abbreviations
DIN 918-3 Overview of European Standards for fasteners
DIN 919-1 Technical Drawings; Wood Processing; Principles
DIN 921 Slotted pan head screws with large head
DIN 923 Slotted pan head screws with shoulder
DIN 929 Hexagon weld nuts
DIN 930 Fine thread pitch partially threaded screws
DIN 931-1 M1,6 to M39 Hexagon Cap Screws Partially Threaded - Product grades A and B
DIN 931-2 M42 to M160x6 Hexagon Cap Screws Partially Threaded - Product grade B
DIN 933 M1,6 to M52 Hexagon Cap Screws Fully Threaded - Product grades A and B
DIN 934 Hexagon nuts with metric coarse and fine pitch thread - Product classes A and B
DIN 935-1 Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B
DIN 935-2 M42 to M160x6 hexagon head bolts; product grade B
DIN 935-3 Hexagon slotted nuts with metric coarse pitch thread - Product grade C
DIN 936 M8 to M52 and M8x1 to M52x3 hexagon thin nuts; product grades A and B
DIN 937 Hexagon thin castle nuts
DIN 938 Studs with a length of engagement equal to about 1 d
54 | P a g e
DIN TITLE
DIN 939 Studs with a length of engagement equal to about 1,25 d
DIN 946 Determination of coefficient of friction of bolt/nut assemblies under specified conditions
DIN 960 M8x1 to M100x4 hexagon head bolts with fine pitch thread - Product grades A and B
DIN 961 M8x1 to M52x3 hexagon head bolts with fine pitch thread - Product grades A and B
DIN 962 Designation system for fasteners
DIN 963 Slotted countersunk head screws (with countersunk heads as specified in ISO 2009-1972)
DIN 964 Slotted raised countersunk oval head screws
DIN 965 Cross recessed countersunk flat head screws
DIN 966 Cross recessed raised countersunk head screws
DIN 970 Hexagon nuts; Style 1; Metric coarse thread, Product grades A and B; ISO 4032 modified
DIN 971-1 Style 1 hexagon nuts with metric fine pitch thread; property classes 6 and 8
DIN 971-2 Style 2 hexagon nuts with metric fine pitch thread; property classes 10 and 12
DIN 972 M5 to M39 hexagon nuts; style 1; product grade C (modified version of ISO 4034)
DIN 975 Threaded rods
DIN 976-1 Metric thread stud bolts
DIN 976-2 Metric interference-fit thread stud bolts
DIN 977 Hexagon weld nuts with flange
DIN 979 Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B
DIN 980 All-metal prevailing torque type hexagon nuts
DIN 981 Locknuts for use with rolling bearings
DIN 982 Prevailing torque type hexagon nuts with nonmetallic insert
DIN 983 Retaining rings with lugs for use on shafts (external circlips)
DIN 985 Prevailing torque type hexagon thin nuts with nonmetallic insert
DIN 986 Prevailing torque type hexagon domed cap nuts with non-metallic insert
DIN 988 Shim rings and supporting rings
2. DIN 1000 to DIN 9999
DIN 1000 to DIN 1999
DIN TITLE
DIN 1025-1 Hot rolled I-sections - Part 1: Narrow flange I-sections, I-serie - Dimensions, masses, sectional properties
DIN 1025-2 Hot rolled I-beams - Part 2: Wide flange I-beams, IPB-serie; dimensions, masses, sectional properties
DIN 1025-3 Hot rolled I-beams; wide flange I-beams, light pattern, IPBl-serie; dimensions, masses, sectional properties
DIN 1025-4 Hot rolled I-beams; wide flange I-beams heavy pattern, IPBv-serie; dimensions, masses, sectional properties
DIN 1025-5 Hot rolled I-beams; medium flange I-beams, IPE-serie; dimensions, masses, sectional properties
DIN 1301-1 Units - Part 1: Names and Symbols
DIN 1301-2 Units - Part 2: Submultiples and Multiples for General Use
DIN 1301-3 Units - Part 3: Conversions of Units No Longer To Be Used
DIN 1302 General Mathematical Symbols and Concepts
DIN 1303 Vectors, matrices, tensors; symbols and concepts
DIN 1304-1 Letter symbols for physical quantities - Part 1: Symbols for general use
DIN 1304-2 Letter symbols for physical quantities - Part 2: Symbols for use in meteorology and geophysics
DIN 1304-3 Letter symbols for physical quantities - Part 3: Symbols for use in electric power engineering
DIN 1304-5 Letter symbols for physical quantities - Part 5: Symbols for use in fluid mechanics
DIN 1304-8 Letter symbols for physical quantities - Part 9: Symbols for use in the field of static converters using semiconductor devices
55 | P a g e
DIN TITLE
DIN 1304-9 Letter symbols for physical quantities - Part 9: Symbols for equivalent circuits of piezoelectric crystals
DIN 1311-1 (Mechanical) vibrations, oscillations and vibration systems - Part 1: Basic concepts, survey
DIN 1311-2 (Mechanical) vibrations, oscillations and vibration systems - Part 2: Linear vibration systems with single degree of freedom
DIN 1311-3
(Mechanical) vibrations, oscillations and vibration systems - Part 3: Linear time-invariant vibration systems with a finite number
of degrees of freedom
DIN 1311-4 Vibration; Vibrating Continua, Waves
DIN 1313 Physical Quantities and Equation; Concepts, Methods of Writing
DIN 1315 Angle; Concepts, Units
DIN 1318 DIN 1324-1
DIN 1324-2 Electromagnetic Field - Part 2. Material Quantities
DIN 1324-3 Electromagnetic Field - Part 3. Electromagnetic Waves
DIN 1325-1 Vocabulary for value management, value analysis and functional analysis - Part 1: Value analysis and functional analysis
DIN 1325-2 Value Management, Value Analysis, Functional Analysis Vocabulary - Part 2: Value Management
DIN 1332 Acoustics; Symbols
DIN 1333 Presentation of Numerical Data
DIN 1338 Writing and Typesetting of Formulae
DIN 1355-1 Time; Calendar, Numbering of Weeks, Date of Day, (Clock) Time
DIN 1421 Arrangement and Numbering in Texts; Clauses, Paragraphs, Enumerations
DIN 1422-1 Publications in Sciences, Technology, Economy and Administration; Presentation of Manuscripts and Typoscripts
DIN 1422-2 Publications in Sciences, Technology, Economy and Administration; Presentation of Clean Copies for Reprographic Use
DIN 1422-3 Publications in Sciences, Technology, Economy and Administration; Typographical Presentation
DIN 1422-4 Publications in Sciences, Technology, Economy and Administration; Presentation of Scientific and Technical Reports
DIN 1440 Medium type washers for pins
DIN 1443 Clevis pins without head
DIN 1444 Clevis pins with head
DIN 1450 Legibility of Typefaces – General
DIN 1451-1 Lettering - Linear-Antiqua without serifes – General
DIN 1451-2 Typefaces - lineal Linear-Antiqua; lettering for transportation
DIN 1451-3 Lettering - Linear-Antiqua without serifes; lettering for printing
DIN 1451-4 Typefaces - lineal Linear-Antiqua; stenciled lettering for engraving and other processes
DIN 1463-1 Guidelines for the Establishment and Development of Thesauri; Monolingual Thesauri
DIN 1463-2 Guidelines for the Establishment and Development of Thesauri; Multilingual Thesauri
DIN 1470 Grooved Pins, Full Length Parallel-grooved with Pilot
DIN 1471 Grooved Pins, Full Length Taper-grooved
DIN 1472 Grooved Pins, Half Length Taper-grooved
DIN 1473 Grooved Pins, Full Length Parallel-grooved with Chamfer
DIN 1474 Grooved Pins, Half Length Reverse-grooved
DIN 1475 Grooved Pins, Third Length Centre-grooved
DIN 1476 Round Head Grooved Pins
DIN 1477 Countersunk Head Grooved Pins
DIN 1481 Spring-Type Straight Pins (Roll Pins) - Heavy Type
DIN 1505-1 Bibliographic references to documents - Part 1: Full References to Printed and Published Documents
DIN 1505-2 Bibliographic references to documents - Part 2: Rules for Citing
56 | P a g e
DIN TITLE
DIN 1505-3 Bibliographic references to documents - Part 3: Indexes of cited documents (bibliographies)
DIN 1511 Pattern Equipment for Foundries; Production and Quality
DIN 1530-1 Tools for moulding - Part 1: Ejector pins with cylindrical head
DIN 1530-2 Tools for moulding - Part 2: Shouldered ejector pins
DIN 1530-3 Tools for moulding - Part 3: Ejector pins with conical head
DIN 1587 Hexagon domed cap nuts
DIN 1707 Soft Solders; Composition, Technical Delivery Condition
DIN 1712 Part 1 Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting – Specifications
DIN 1712 Part 3 Aluminium; Half-Finished Products
DIN 1783 Strips, Plates and Sheets of Aluminium and Wrought
DIN 1786 Seamless Drawn Copper Tubes for Piping Systems
DIN 1798 Round Rod of Aluminium (Highest Grade Aluminium)
DIN 1804 Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread
DIN 1810 Hook wrenches
DIN 1816 Round Nut with Set Pin Holes Inside; ISO Metric Fine Thread
DIN 1912-1 Graphical Representation of Welded, Soldered and Brazed Joints
DIN 1912-2 Graphical Representation of Welded, Soldered and Brazed Joints
DIN 1912-4 Graphical Representation of Welded, Soldered and Brazed Joints; Concepts and Terms for Soldered and Brazed Joints and Seams
DIN 1912-5 Symbolic Representation on Drawings of Welded, Soldered and Brazed Joints
DIN 1960 Construction contract procedures (VOB) - Part A: General provisions relating to the award of construction contracts
DIN 1961 Construction contract procedures (VOB) - Part B: General conditions of contract relating to the execution of construction work
DIN 2000 to DIN 2999[edit]
DIN TITLE
DIN 2112 Alphanumeric office machines - Alphanumeric keyboards, keyboard arrangement for manually operated typewriters
DIN 2127 Alphanumeric office machines; alphanumeric keyboards, keyboard arrangement for electro-mechanical operated typewriters
DIN 2137-1 Keyboards for data and text input - Part 1:German keyboard layout
DIN 2137-2 Keyboards for data and text input - Part 2: Additional requirements
DIN 2181 Sets of 2 taps for metric fine ISO-threads M1 × 0,2 to M52 × 4
DIN 2342-1 Vocabulary of terminology; basic concepts
DIN 2391-1 Seamless precision steel tubes - Part 1: Dimensions
DIN 2391-2 Seamless precision steel tubes - Part 2: Technical delivery conditions
DIN 2448 Seamless Steel Pipes and Tubes - Dimensions, Conventional Masses per Unit Length
DIN 2527 Blank flanges - Nominal pressure 6 to 100
DIN 2860 Capillary Fittings; Bends 180° of Copper
DIN 2999-1 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
DIN 2999-2
WhitworthPipe Threads for Tubes and Fittings; Cylindrical Internal Thread and Conical External Thread, Gauging System and
Use of Gauges
DIN 2999-3 WhitworthPipe Threads for Tubes and Fittings; Gauge Dimensions
DIN 2999-4 Pipe threads for tubes and fittings; sizes for taper screw limit plug gauges for parallel internal thread
DIN 2999-5
WhitworthPipe Threads for Tubes and Fittings; Cylindrical Screw Limit Ring Gauges for Gauging Conical External Threads,
Sizes
DIN 2999-6 WhitworthPipe Threads for Tubes and Fittings; Conical Screw Check Plugs, Sizes
DIN 4000 to DIN 4999[edit]
DIN TITLE
57 | P a g e
DIN TITLE
DIN 4048-1 Water engineering, terms - Part 1: Dam plants
DIN 4048-2 Water engineering, terms - Part 2: Waterpower plants
DIN 4054 Correction of waterways, terms
DIN 4094-1 Subsoil, Field investigations - Part 1: Cone penetration tests
DIN 4102-1 Fire behaviour of building materials and elements - Part 1: Classification of building materials - Requirements and testing
DIN 4102-2
Fire Behaviour of Building Materials and Building Components - Part 2: Building Components; Definitions, Requirements and
Tests
DIN 4102-3
Fire Behaviour of Building Materials and Building Components - Part 3: Fire Walls and Non-load-bearing External Walls;
Definitions, Requirements and Tests
DIN 4102-4
Fire behaviour of building materials and elements - Part 4: Overview and design of classified building materials, elements and
components
DIN 4102-5
Fire Behaviour of Building Materials and Building Components - Part 5: Fire Barriers, Barriers in Lift Wells and Glazings
Resistant against Fire; Definitions, Requirements and Tests
DIN 4102-6 Fire Behaviour of Building Materials and Building Components - Part 6: Ventilation Ducts; Definitions, Requirements and Tests
DIN 4102-7 Fire behaviour of building materials and elements - Part 7: Roofing - Concepts, requirements and testing
DIN 4102-8 Fire behaviour of building materials and components - Part 8: Small scale test furnace
DIN 4102-9 Fire behaviour of building materials and elements - Part 9: seals for cable penetrations; concepts, requirements and testing
DIN 4102-11
Fire behaviour of building materials and building components - Part 10: pipe encasements, pipe bushings, service shafts and ducts,
and barriers across inspection openings; terminology, requirements and testing
DIN 4102-12
Fire behaviour of building materials and elements - Part 12: Fire resistance of electric cable systems required to maintain circuit
integrity - Requirements and testing
DIN 4102-13 Fire behaviour of building materials and elements - Part 13: Fire resistant glazing; concepts, requirements and testing
DIN 4102-14
Fire behaviour of building materials and elements - Part 14: Determination of the burning behaviour of floor covering systems
using a radiant heat source
DIN 4102-15 Fire behaviour of building materials and elements - Part 15: "Brandschacht"
DIN 4102-16 Fire behaviour of building materials and elements - Part 16: "Brandschacht" tests
DIN 4102-17
Fire behaviour of building materials and elements - Part 17: determination of melting point of mineral fibre insulating materials;
concepts, requirements and testing
DIN 4102-18
Fire behaviour of building materials and components - Part 18: fire barriers, verification of automatic closure (continuous
performance test)
DIN 4102-22
Fire behaviour of building materials and building components - Part 22: Application standard for DIN 4102-4 based on the design
of partial safety factors
DIN 4108-1 Thermal protection and energy economy in buildings - Part 1: Quantities and units
DIN 4108-2 Thermal protection and energy economy in buildings - Part 2: Minimum requirements to thermal insulation
DIN 4108-3
Thermal protection and energy economy in buildings - Part 3: Protection against moisture subject to climate conditions;
Requirements and directions for design and construction
DIN 4108-7
Thermal insulation and energy economy of buildings - Part 7: Airtightness of building, requirements, recommendations and
examples for planning and performance
DIN 4108-10
Thermal insulation and energy economy in buildings - Part 10: Application-related requirements for thermal insulation materials -
Factory made products
DIN 4150-1 Structural vibration - Part 1: Prediction of vibration parameters
DIN 4150-2 Structural vibration - Part 2: Human exposure to vibration in buildings
DIN 4150-3 Structural vibration - Part 3: Effects of vibration on structures
DIN 4420-1 Service and working scaffolds - Part 1: Service scaffolds - Performance requirements, general design, structural design
DIN 4512
Photographic sensitometry, determination of optical density: "Photographische Sensitometrie, Bestimmung der optischen Dichte"
(1934-01, 1957-11, 1961-10)
DIN 4512-1
Photographic sensitometry, determination of the speed of black and white negative materials for pictorial photography (1971-04,
1993-05)
DIN 4512-3 Photographic sensitometry, determination of diffuse transmission density (1973-01)
58 | P a g e
DIN TITLE
DIN 4512-4 Photographic sensitometry; determination of the speed of colour reversal films (1977-06, 1985-08)
DIN 4512-5 Photographic sensitometry; determination of the speed of colour negative films (1977-10, 1990-11)
DIN 4512-6 Photographic sensitometry; sensitometric illuminants and light sources (1980-07)
DIN 4512-7 Photographic sensitometry, determination of optical density; concepts, symbols and notations (1993-01)
DIN 4512-8 Photographic sensitometry, determination of optical density; geometric conditions for transmission density (1993-01)
DIN 4512-9 Photographic sensitometry, determination of optical density; spectral conditions (1993-01)
DIN 4512-10 Photographic sensitometry, determination of optical density; geometric conditions for reflection density (1993-01)
DIN V 4701-10 Energy efficiency of heating and ventilation systems in buildings - Part 10: Heating, domestic hot water supply, ventilation
DIN V 4701-12
Energetic evaluation of heating and ventilation systems in existing buildings - Part 12: Heat generation and domestic hot water
generation
DIN 4710 Statistics onGermanmeteorologicaldata forcalculating theenergyrequirements forheating and air conditioningequipment
DIN 5000 to DIN 5999[edit]
DIN TITLE
DIN 5008 Rules for text presentation
DIN 5031-1 Physics of radiation in the field of optics and illuminating engineering - Part 1: Quantities, symbols and units of radiation physics
DIN 5031-2 Physics of radiation in the field of optics and illuminating engineering - Part 2: Evaluation of radiation by different detectors
DIN 5031-3
Physics of radiation in the field of optics and illuminating engineering - Part 3: Quantities, symbols and units of illuminating
engineering
DIN 5031-4 Physics of radiation in the field of optics and illuminating engineering - Part 4: Efficiencies
DIN 5031-5 Physics of radiation in the field of optics and illuminating engineering - Part 5: Definitions for temperatures
DIN 5031-6 Physics of radiation in the field of optics and illuminating engineering - Part 6: Pupil intensity as a measure of retinal illumination
DIN 5031-7 Physics of radiation in the field of optics and illuminating engineering - Part 7: Terms for wavebands
DIN 5031-8 Physics of radiation in the field of optics and illuminating engineering - Part 8: Definitions and constants of radiation physics
DIN 5031-9 Physics of radiation in the field of optics and illuminating engineering - Part 9: Definitions in the field of luminescence
DIN 5031-10
Physics of radiation in the field of optics and illuminating engineering - Part 10: Photobiologically effective radiation, quantities,
symbols and actions
DIN 5035-3 Artificial lighting - Part 3: Lighting of health care premises
DIN 5035-6 Artificial lighting - Part 6: Measurement and evaluation
DIN 5035-7 Artificial lighting - Part 7: Lighting of interiors with visual displays work stations
DIN 5035-8 Artificial lighting - Part 8: Workplace luminaries - Requirements, recommendations and proofing
DIN 5145 Plane irons for wood smooth and for planes
DIN 5146 Curved irons for jack planes
DIN 5406 Lockwashers and locking plates for use with rolling bearings
DIN 5466-1 Splined joints, calculation of load capacity - Part 1: general basis
DIN 5473 Logic and set theory; symbols and concepts
DIN 5474 Signs in mathematical logic
DIN 5475-1 Complex quantities; nomenclature
DIN 5483-1 Time-dependent quantities - Part 1: Terms for the time-dependency
DIN 5483-2 Time-dependent quantities - Part 2: Letter symbols
DIN 5483-3 Time-dependent quantities - Part 3: Complex representation of sinusoidal time-dependent quantities
DIN 5486 Notation of matrices
DIN 5487 Fourier-, Laplace- and Z-transformation; symbols and concepts
DIN 5489 Directions and signs in electrical engineering; rules for electric and magnetic circuits, equivalent circuit diagrams
DIN 5493-2 Logarithmic quantities and units - Part 2: Logarithmic ratios, levels in nepers and decibels
59 | P a g e
DIN TITLE
DIN 5510-2 Fire test to railway components
DIN 6000 to DIN 6999[edit]
DIN TITLE
DIN 6319 Spherical washers and conical seats
DIN 6325 Parallel Pins, Hardened; Tolerance Zone m6
DIN 6340 Washers for clamping devices
DIN 6738 Paper and paper board - Lifespan classes
DIN 6776 Technical drawings, labeling
DIN 6797 Toothed lock washers
DIN 6798 Serrated lock washers
DIN 6799 Lock washers (retaining washers) for shafts
DIN 6880 Bright Key Steel; Dimensions, Permissible Variations, Weights
DIN 6885-1 Drive Type Fastenings without Taper Action – Part 1: Parallel Keys, Keyways, Deep Pattern
DIN 6885-2
Drive Type Fastenings without Taper Action – Part 2: Parallel Keys, Keyways, Deep Pattern for Machine Tools, Dimensions and
Application
DIN 6885-3 Drive Type Fastenings without Taper Action – Part 3: Parallel Keys, Shallow Pattern, Dimensions and Application
DIN 6900 Screw and Washer Assemblies
DIN 6901 Tapping screw and washer assemblies
DIN 6902 Plain washers for screw and washer assemblies
DIN 6903 Plain washers for tapping screw and washer assemblies
DIN 6912 Hexagon socket thin head cap screws with pilot recess
DIN 6914 High-strength hexagon head bolts with large widths across flats for structural steel bolting
DIN 6916 Round washers for high-strength structural steel bolting
DIN 6921 Hexagon flange bolts
DIN 6922 Hexagon flange bolts with reduced shank
DIN 6923 Hexagon nuts with flange
DIN 6924 Prevailing torque type hexagon nuts with nonmetallic insert
DIN 6925 Prevailing torque type all-metal hexagon nuts
DIN 6926 Prevailing torque type hexagon nuts with flange and with non-metallic insert
DIN 6927 Prevailing torque type all-metal nuts with flange
DIN 7000 to DIN 7999[edit]
DIN TITLE
DIN 7045 Pan head screws with type H or type Z cross recess - product grade A
DIN 7245 Saw blades for web saws
DIN 7337 Break mandrel blind rivets
DIN 7343 Spiral Pins; Normal Type
DIN 7344 Spiral Pins; Heavy Duty Type
DIN 7346 Spring-Type Straight Pins; (Roll Pins) Light-weight Type
DIN 7349 Plain Washers for Bolts with Heavy Clamping Sleeves
DIN 7500-1 Thread rolling screws for metric ISO thread - Part 1: Types, designation, requirements
DIN 7500-2 Thread rolling screws for ISO metric thread; guideline values for hole diameters
DIN 7504 Self-drilling screws with tapping screw thread - Dimensions, requirements and testing
DIN 7513 Hexagon head and slotted head thread cutting screws - Dimensions, requirements and testing
DIN 7516 Cross recessed head thread cutting screws - Dimensions, requirements and testing
60 | P a g e
DIN TITLE
DIN 7603 Ring seals and gaskets
DIN 7875 Diving accessories for skin divers; terminology
DIN 7876 Diving accessories for skin divers; flippers. dimensions. requirements and testing)
DIN 7877 Diving accessories for skin divers; diver"s masks. requirements and testing
DIN 7962 Cross recesses for screws; (modified version of ISO 4757)
DIN 7970 Threads and thread ends for tapping screws (modified version of ISO 1478)
DIN 7971 Slotted pan head tapping screws
DIN 7972 Slotted countersunk head tapping screws
DIN 7973 Slotted raised countersunk head tapping screws
DIN 7977 Taper Pins with Thread Ends and Constant Point Lengths
DIN 7978 Taper Pins with Internal Thread
DIN 7979 Parallel Pins with Internal Thread
DIN 7980 Spring lock washers with square ends for cheese head screws
DIN 7981 Cross recessed pan head tapping screws
DIN 7982 Cross recessed countersunk head tapping screws
DIN 7983 Countersunk (Flat) Head Tapping Screws with Cross Recess
DIN 7984 Hexagon socket thin head cap screws
DIN 7985 Cross recessed raised cheese head screws
DIN 7989-1 Washers for steel structures - Product grade C
DIN 7989-2 Washers for steel structures - Product grade A
DIN 7991 Hexagon socket countersunk head cap screws
DIN 8000 to DIN 8999[edit]
DIN TITLE
DIN 8074 Polyethylene (PE) pipes – Dimensions
DIN 8075 Polyethylene (PE) pipes - PE 63, PE 80, PE 100, PE-HD - General quality requirements, testing
DIN 8077/8078 Polypropylene (PP-R) Pipes -PN 20, PN25 PP-R - General quality requirements, testing
DIN 8513-1 Brazing and Braze Weld Filler Metals; Copper Base Brazing Alloys; Composition, Use, Technical Conditions of Delivery
DIN 8513-2
Brazing and Braze Weld Filler Metals; Silver-bearing Brazing Alloys with less than 20% by wt. Silver; Composition, Use,
Technical Conditions of Delivery
DIN 8513-3
Brazing filler metals; silver brazing filler metals containing not less than 20% of silver; composition, application, technical
delivery conditions
DIN 8513-4 Brazing and Braze Weld Filler Metals; Aluminium-Base Brazing Alloys; Composition, Use, Technical Conditions of Delivery
DIN 8513-5
Brazing filler metals; Nickel base filler metals for high temperature brazing; Application, composition, technical delivery
conditions
DIN 8580 Manufacturing processes - Terms and definitions, division
DIN 8806-1 Narrow band saw blades for woodworking; dimensions
DIN 9000 to DIN 9999[edit]
DIN TITLE
DIN 9021 Plain washers with large outside diameter
3. DIN 10000 to DIN 19999[edit]
DIN 10000 to DIN 10999[edit]
DIN TITLE
DIN 10504 Food hygiene -Lampsfor thelighting ofmeat andmeat products
DIN 11000 to DIN 11999[edit]
DIN TITLE
61 | P a g e
DIN TITLE
DIN 11850 Tubes for the food, chemical and pharmaceutical industry - Stainless steel tubes - Dimensions, materials
DIN 12000 to DIN 12999[edit]
DIN TITLE
DIN 12950-1 Laboratory furniture; safety cabinets for microbiological and biotechnological work; safety requirements, tests
DIN 12950-2
Laboratory furniture; safety cabinets for microbiological and biotechnological work; containment of class 1 and class 2 cabinets,
microbiological test
DIN 12950-10 Laboratory furniture; safety cabinets for microbiological and biotechnological work; requirements and testing
DIN 12975-1 Thermal solar systems and components - Solar collectors - Part 1: General requirements
DIN 12975-2 Thermal solar systems and components - Solar collectors - Part 2: Test methods
DIN 12976-1 Thermal solar systems and components - Factory made systems - Part 1: General requirements
DIN 12976-2 Thermal solar systems and components - Factory made systems - Part 2: Test methods
DIN 13000 to DIN 13999[edit]
DIN TITLE
DIN 13080 Division of hospitals into functional areas and functional sections
DIN 13260-2
Supply systems for medical gases - Part 2: Dimensions and allocation of probes and gas-specific connection points for terminal
units for compressed medical gases and vacuum
DIN 13432
Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation
criteria for the final acceptance of packaging
DIN 13715 Workpiece corners and edges
DIN 14000 to DIN 14999[edit]
DIN TITLE
DIN 14090 Areas for the fire brigade on premises
DIN 14096-1 Fire precaution regulation - Part 1: General and part A (placard); rules for drafting and placarding
DIN 14096-2 Fire precaution regulation - Part 2: Part B (for persons without special tasks of fire prevention and fire fighting); rules for drafting
DIN 14096-3 Fire precaution regulation - Part 3: Part C (for persons with special tasks of fire prevention and fire fighting); rules for drafting
DIN 14210 Water pool for firefighting
DIN 14236 Ultrasonic domestic gas meters
DIN 14406-4 Portable fire extinguishers - Part 4: Maintenance
DIN 14503 Trailers for firefighting purposes, two-wheeled; general requirements
DIN 14505 Firefighting and rescue service vehicles - Vehicles for roller containers - General requirements
DIN 14507 Rescue service vehicles - Vehicles for roller containers - General requirements
DIN 14520 Trailers for portable fire pumps
DIN 14521 Firefighting - Trailer with removable foam-water monitor
DIN 14530-5 Fire fighting vehicles - Part 5: Group pumping appliance LF 10/6, Group pumping appliance for rescue operations HLF 10/6
DIN 14530-11 Fire fighting vehicles - Part 11: Group pumping appliance LF 20/16, Group pumping appliance for rescue operations HLF 20/16
DIN 14530-16 Fire fighting vehicles - Part 16: Pumping appliance TSF
DIN 14530-17 Fire fighting vehicles - Part 17: Pumping appliance TSF-W
DIN 14530-21 Fire fighting vehicles - Part 21: Pump water tanker TLF 20/40, Pump water tanker TLF 20/40-SL
DIN 14530-22 Fire fighting vehicles - Part 22: TLF 16/24-TR
DIN 14530-24 Fire fighting vehicles - Part 24: Small pumping appliance KLF
DIN 14530-25 Fire fighting vehicles - Part 25: Pumping appliance STLF 10/6
DIN 14555-1 Vehicles carrying tools and gears - Part 1: General requirements
DIN 14555-3 Vehicles carrying tools and gears - Part 3: Emergency tender RW
DIN 14555-12 Vehicles carrying tools and gears - Part 12: Damage control tender GW-G
DIN 14555-21 Vehicles carrying tools and gears - Part 21: GW-L1 for logistic tasks
62 | P a g e
DIN TITLE
DIN 14555-22 Vehicles carrying tools and gears - Part 22: GW-L2 for logistic tasks
DIN 14565 Fire hose tender; Type SW 2000-TR
DIN 14701-1 Turntable ladders and similar fire fighting vehicles; Purpose, concepts, safety equipment, requirements
DIN 14701-2 Turntable ladders and similar fire fighting vehicles; Turn table ladders, engine driven
DIN 14701-3 Turntable ladders and similar fire fighting vehicles; Rescue baskets
DIN 14702 Turntable ladder DL 16-4, hand operating
DIN 14703 Trailer Ladder AL 16-4
DIN 14710-1 Hook ladder, manufactured using wood; with hinged hook
DIN 14710-3 Hook light metal ladder
DIN 14711-1 Scaling ladder; made from wood
DIN 14711-2 Scaling ladder; made from light metal
DIN 14711-3 Scaling ladder; socket rungs and socket parts
DIN 14713 Folding ladder
DIN 14715-1 Three piece extension ladder made from wood
DIN 14715-2 Three piece extension ladder; made of light metal
DIN 15000 to DIN 15999[edit]
DIN TITLE
DIN 15018-2 Cranes; steel structures; principles of design and construction
DIN 15185-1 Warehouse systems with guided industrial trucks; requirements on the ground, the warehouse and other requirements
DIN 15185-2
Warehousesystems with powered industrials trucks; code of practice for the protection of persons when operating with trucks in
narrow aisles; safety requirements, testing
DIN 15721 Film 70 mm;projection reel
DIN 16000 to DIN 16999[edit]
DIN TITLE
DIN 16518 Classification of types
DIN 16892 Cross-linkedhigh-densitypolyethylene(PE-X) pipes- General qualityrequirementsand testing
DIN 16893 Cross-linkedhigh-densitypolyethylene(PE-X) pipes– Dimensions
DIN 17000 to DIN 17999[edit]
DIN TITLE
DIN 17175 Seamless Tubes of heat Resistant Steels
DIN 17410 Materials for permanent magnets: Technical conditions
DIN 17457
DIN 17458
DIN 17471 Resistance alloys
DIN 18000 to DIN 18999[edit]
DIN TITLE
DIN 18012 House service connections facilities - Principles for planning
DIN 18013 Recesses for meter boards (electric meters)
DIN 18014 Foundation earth electrode - General planning criteria
DIN 18015-1 Electrical installations in residential buildings - Part 1: Planning principles
DIN 18015-2 Electrical installations in residential buildings - Part 2: Nature and extent of minimum equipment
DIN 18015-3 Electrical installations in residential buildings - Part 3: Wiring and disposition of electrical equipment
DIN 18022 Domestic kitchens, bathrooms and WCs; design principles
DIN 18024-1
Barrier-free built environment - Part 1: Streets, squares, paths, public transport, recreation areas and playgrounds - Design
principles
63 | P a g e
DIN TITLE
DIN 18024-2 Construction of accessible buildings - Part 2: Publicly accessible buildings and workplaces, design principles
DIN 18065 Stairs in buildings - Terminology, measuring rules, main dimensions
DIN 18379
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation
of air conditioning systems
DIN 18382
Contract procedures for building works - Part C: General technical specifications for building works; Low-voltage installation and
medium-voltage installation with nominal voltages up to including 36 kV
DIN 18384
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Installation
oflightningprotection systems
DIN 18800-1 Steel structures - Part 1: Design and construction
DIN 18800-2 Steel structures - Part 2: Analysis of safety against buckling of linear members and frames
DIN 18800-3 Steel structures - Part 3: Analysis of safety against buckling of plates
DIN 18800-4 Steel structures - Part 4: Analysis of safety against buckling of shells
DIN 18800-5 Steel structures - Part 5: Composite structures of steel and concrete - Design and construction
DIN 18800-7 Steel structures - Part 7: Execution and constructor's qualification
DIN 19000 to DIN 19999[edit]
DIN TITLE
DIN V 19222 Control technology – Terminology
DIN 19225 Measurement and control; terminology and classification of controllers
DIN 19226-1 Control technology - Part 1: General terms and definitions
DIN 19226-2 Control technology - Part 2: Terms and definitions; dynamic systems behaviour
DIN 19226-3 Control technology - Part 3: Terms and definitions of switching systems behaviour
DIN 19226-4 Control technology - Part 4: Terms and definitions of control systems
DIN 19226-5 Control technology - Part 5: Functional terms
DIN 19226-6 Control technology - Part 6: Terms and definitions of functional and constructional units
DIN 19227-1
Control technology; graphical symbols and identifying letters for process control engineering; symbolic representation for
functions
DIN 19227-2 Control technology; graphical symbols and identifying letters for process control engineering; representation of details
DIN 19237 Measurement and control; control engineering vocabulary
DIN 19227-1
Control technology; graphical symbols and identifying letters for process control engineering; symbolic representation for
functions
DIN 19227-2 Control technology; graphical symbols and identifying letters for process control engineering; representation of details
DIN 19533
Pipe-lines of high-density PE (high-density polyethylene) and low-density PE (low density polyethylene) for drinking water
supply; pipes, pipe connections and fittings for pipe-lines
DIN 19704-1 Hydraulic steel structures - Part 1: Criteria for design and calculation
DIN 19704-2 Hydraulic steel structures - Part 2: Design and manufacturing
DIN 19704-3 Hydraulic steel structures - Part 3: Electrical equipment
DIN 20000 to DIN 29999[edit]
DIN TITLE
DIN 20066 Fluid technology - hose lines, dimensions, specifications
DIN 20163 Explosives work
DIN 21800 Hammer and chisel signs (mining symbol)
DIN 21908 Mining crevice work; colours
DIN 22101 Conveyor beltfor bulk material, fundamentals, analysis and design
DIN 22107 Arrangements for belt conveyorrollers
DIN 22112 Rollers: dimensions, specifications, testing
DIN 23307 Seat leathers for the mining industry (miner's apron)
64 | P a g e
DIN TITLE
DIN 23342 Clothing for the mining industry – men's vest with 1/4 sleeves
DIN 23345 Clothing for the mining industry – men's underpants 1/1 length (Long Johns)
DIN 24000 to DIN 24999[edit]
DIN TITLE
DIN 24190 Ventilationand air conditioning - folded and welded rectangularsheet metalducts
DIN 24271-1 Centralisedlubrication systems - Concepts - Part 1: ClassificationLubrication
DIN 24340-2 Hydraulicvalves; mounting surfaces and connecting plates for directionalcontrol valves
DIN 28000 to DIN 28999[edit]
DIN TITLE
DIN 28610-1 Ductile iron pressure pipes with socket with cement-mortar lining for gas and water pipelines; dimensions and masses
DIN 28610-2
Ductile iron pressure pipes with socket for gas and water pipelines rated for pressures over 4 bar up to and including 16 bar;
dimensions and masses
DIN 30000 to DIN 39999[edit]
DIN TITLE
DIN 30722-1
Roller contact tipper vehicles, roller containers - Part 1: Roller contact tipper vehicles up to 26 t, roller containers type 1570 made
from steel
DIN 30722-2
Roller contact tipper vehicles, roller containers - Part 2: Roller contact tipper vehicles up to 32 t, roller containers type 1570 made
from steel
DIN 30722-3
Roller contact tipper vehicles, roller containers - Part 3: Roller contact tipper vehicles up to 12 t, roller containers type 900 made
from steel
DIN 30722-4 Roller containersfor the transport on road and rail
DIN 31000 to DIN 31999[edit]
DIN TITLE
DIN 31635 Conversionof theArabic alphabet
DIN 40000 to DIN 49999[edit]
DIN TITLE
DIN 40015 Frequency and wave bands
DIN 40020 Guidelines for the user interface in multimedia equipment for general purpose use (IEC/TR 61997:2001)
DIN 40050-9 Road vehicles; degrees of protection (IP-code); protection against foreign objects; water and contact; electrical equipment
DIN 40101-1 Graphical symbols for use on equipment
DIN 40101-2 Graphical symbols for use on equipment; graphical symbols from ISO 7000 for electrical engineering
DIN 40108 Electric power technology - Current systems - Concepts, quantities, letter symbols
DIN 40110-1 Quantities used in alternating current theory - Part 2: Two-line circuits
DIN 40110-2 Quantities used in alternating current theory - Part 2: Multi-line circuits
DIN 40146-1 Telecommunications - Part 1: Basic concepts
DIN 40148-1 Transmission systems and two-ports; concepts and quantities
DIN 40148-2 Transmission systems and two-ports; symmetry characteristics of linear two-ports
DIN 40148-3 Transmission systems and two-ports; measures for attenuation
DIN 40200 Nominal value, limiting value, rated value, rating - concepts
DIN 41215 Electrical communication engineering; electromagnetic relays, definitions
DIN 41301 Electro Sheets; Magnetic Materials for Transformers
DIN 41309-1 Small transformers and chokes; strip-wound cut cores; types SM, SE, SU, SG and S3U; dimensions materials
DIN 41309-2
Small transformers and chokes; strip-wound cut cores; technical conditions of delivery for one phase applications; types SM, SE,
SU and SG
DIN 41309-3 Small transformers and chokes; strip-wound cut cores; technical conditions of delivery for three phase applications; type S3U
DIN 41426 Nominal values of resistors and capacitors
65 | P a g e
DIN TITLE
DIN 41429 Colour code for fixed resistors
DIN 41524 Circular connectors for radio and associated sound equipment three and five-pole connectors
DIN 41612-1 Two-part connectors for printed board, grid 2,54 mm; common mounting features; survey of types
DIN 41612-1 S1 Two piece connectors for printed circuits, grid 2,54 mm (0,1 in); general allusions
DIN 41612-2 Two-part connectors for printed boards; grid 2,54mm; dimensions of types B, C and D
DIN 41612-3 Two part connectors for printed boards; grid 2,54mm; dimensions of types F and G
DIN 41612-4 Two-part connectors for printed boards; grid 2,54mm, dimensions of type H
DIN 41612-5 Two-part connectors for printed boards; grid 2,54mm; ratings, requirements, tests
DIN 41612-6 Two-part connection for printed boards; grid 2.54mm; dimensions of types Q, R and S
DIN 41612-7 Two-part connectors for printed boards; grid 2,54 mm; dimensions of types U and V
DIN 41612-8 Two-part connectors for printed boards; grid 2.54 mm; dimensions of type M
DIN 41612-8 S1 Two-part connectors for printed boards; grid 2.54 mm; dimensions of type M; survey of special contracts for use with type M
DIN 41612-9 Two-part connectors for printed boards; grid 2,54 mm; dimensions of type E
DIN 41612-10 Two-part connectors for printed boards; grid 2,54mm; gauges
DIN 41612-102 Two-part connectors for printed boards; dimensions for type X
DIN 41612-103 Two-part connectors for printed boards; dimensions of type M
DIN 41652-1 Rack and panel connectors, trapezoidal, round contacts 1 mm; common mounting features and dimensions; survey of types
DIN 41652-2 Rack and panel connectors; trapezoidal, round contacts 1 mm; ratings, requirements, tests
DIN 41750-1 Rack and panel connectors, trapezoidal, round contacts ø1 mm; common mounting features and dimensions; survey of types
DIN 41750-2 Rack and panel connectors, trapezoidal, round contacts ø1 mm; ratings, requirements, tests
DIN 41750-3 Rack and panel connectors, trapezoidal, round contacts ø1 mm; dimensions of type A; solder termination for free wiring
DIN 41750-5 Rack and panel connectors, trapezoidal, round contacts ø1 mm; dimensions of type C; crimp termination for free wiring
DIN 41782 Guidelines for the presentation of published data
DIN 41786 Thyristors, definitions
DIN 41855 Semiconductor devices and integrated circuits; kinds of devices and general terms
DIN 41855-2 Semiconductor devices and integrated circuits; optoelectronic semiconductor devices; terms and definitions
DIN 41868 Cases 10 A 3 and 10 B 3 for semiconductor devices; main dimensions
DIN 41869-1 Case 23 A 3 for semiconductor devices; main dimensions
DIN 41869-2 Cases 34 A 2 and 34 A 3 for semiconductor devices; main dimensions
DIN 41869-3 Case 11 A 3 and 11 B 3 for semiconductor devices; main dimensions
DIN 41869-4 Case 12 A 3 for semiconductor devices; main dimensions
DIN 41869-5 Case 13 A 3 for semiconductor devices; main dimensions
DIN 41869-6 Case 14 A 3 for semiconductor devices; main dimensions
DIN 41869-7 Case type 15 for semiconductor devices; main dimensions
DIN 41873 Cases type 5 for semiconductor devices and integrated circuits
DIN 41876 Cases 18 A, B and C with 2 up to 4 terminals for semiconductor devices; main dimensions
DIN 42400 Terminal markings for electrical equipment; general rules, alphanumeric system
DIN 42402 Terminal markings for power transformers and reactors
DIN 42403 Terminal markings for power converters
DIN 42673-1
Totally enclosed fan-cooled three-phase induction motors squirrel-cage, type IM B 3, with rolling bearing; mounting dimensions
and relationship frame sizes-output ratings
DIN 42673-2
Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship
frame sizes - output ratings for type of protection increased safety "e"
DIN 42673-3 Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship
66 | P a g e
DIN TITLE
frame sizes - output ratings for type of protection flameproof enclosure "d"
DIN 42673-4
Totally-enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B3, with ball bearings, maximum
envelope dimensions
DIN 42961 Rating plates for rotating electrical machinery; design
DIN 42973 Rated output values for rotating electrical machinery for continuous duty
DIN 43700 Measurement and control - Measurement and control instruments for panel mounting - Nominal front- and cut-out-dimensions
DIN 43780 Electrical measuring instruments; direct acting indicating electrical measuring instruments and their accessories
DIN 43802-2 Line scales and pointers for indicating electrical measuring instruments; general requirements
DIN 43802-3 Line scales and pointers for indicating electrical measuring instruments; designs and dimensions
DIN 43802-4 Line scales and pointers for indicating electrical measuring instruments; scale graduation and numbering
DIN 43807
Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring
transducers for the measurement of power and power factor
DIN 43856 Electricity meters, tariff time switches and ripple control receivers; connection diagrams, terminal marking, circuit diagrams
DIN 43856-2 Electricity meters - Part 2: Marking of auxiliary terminals for tariff devices according to IEC-Report 61354:1995
DIN 43870-1 Meter mounting boards; dimensions based on a grid system
DIN 43870-2 Meter mounting boards; functional area
DIN 43870-3 Meter panels; wirings
DIN 44070-1 Meter mounting boards; dimensions based on a grid system
DIN 44070-2 Meter mounting boards; functional area
DIN 44070-3 Meter panels; wirings
DIN 44070-4 Meter panels; cover for wiring
DIN 44080 Thermistors; PTC, technical terms and tests
DIN 44300 Information processing; vocabulary
DIN 44300-1 Information processing - Concepts - General terms
DIN 44300-2 Information processing - Concepts - Representation of data
DIN 44300-3 Information processing - Concepts - Data structures
DIN 44300-4 Information processing - Concepts – Programming
DIN 44300-5 Information processing - Concepts - Components of digital computer systems
DIN 44300-6 Information processing - Concepts – Storage
DIN 44300-7 Information processing - Concepts – Times
DIN 44300-8 Information processing - Concepts - Processing functions
DIN 44300-9 Information processing - Concepts - Process relations and modes of operation
DIN 45322 Circular connectors for radio and associated sound equipment; six-pole connectors
DIN 45323
Connectors for coupling an external low-voltage power to portable entertainment equipment (describes at least two DC coaxial
power plugs)
DIN 45500-1 High fidelity audio equipment and systems; minimum performance requirements; Part 1: general
DIN 45500-2 High fidelity audio equipment and systems; requirements for tuner equipments
DIN 45500-3 High fidelity audio equipment and systems; requirements for disk record reproducing equipments
DIN 45500-4
High fidelity audio equipment and systems; minimum performance requirements for magnetic recording and reproducing
equipment
DIN 45500-5 High fidelity audio equipment and systems; minimum performance requirements for microphones
DIN 45500-6 High fidelity audio equipment and systems; minimum performance requirements for amplifiers
DIN 45500-7 High fidelity audio equipment and systems; requirements for loudspeakers
DIN 45500-8 High fidelity audio equipment and systems; for sets and systems
67 | P a g e
DIN TITLE
DIN 45500-10 High fidelity audio equipment and systems; minimum performance requirements for headphones
DIN 45507 Measuring apparatus for frequency variations in sound recording equipment
DIN 45539
Disk record reproducing equipment; directives for measurements, markings and audio frequency connections, dimensions of
interchangeable pickups, requirements of play back amplifiers
DIN 45596 Microphones; phantom powering
DIN 46400-1
Steel flats with special magnetic properties cold rolled, non - oriented, finally annealed magnetic sheet and strip hysteresis loss at
frequencies above 100 Hz
DIN 46400-3 Grain-oriented magnetic steel and strip technical conditions
DIN 47100 Cords for telecommunication; code of insulated conductors, colour of sheath
DIN 47301-1 Terms of HF-lines
DIN 47301-2 Terms of HF-lines
DIN 47301-3 Definition of radio frequency transmission lines - mean characteristic impedance - mean standing wave ratio
DIN 48803 Lightning protection system; Arrangement of components and dimensions for mounting
DIN 48830 Lightning protection system; Description
DIN 50000 to DIN 59999[edit]
DIN TITLE
DIN 51097 Testing of floor coverings; determination of the anti-slip properties: wet-loaded barefoot areas; walking method; ramp test
DIN 51130
Testing of floor coverings; determination of the anti-slip properties: workrooms and fields of activities with slip danger, walking
method - ramp test
DIN 51501 Lubricants; Lubricating Oils L-AN; Minimum Requirements
DIN 52368 Testing of particleboards; determination of formaldehyde emission by gas analysis
DIN 53150 Paints and varnishes - Determination of the drying stage of coatings (modified Bandow-Wolff method)
DIN 53438 Testing of combustible materials; response to ignition by small flame
DIN 53452 Testing of Plastics; Flexural Test
DIN 53575 Flexible Cellular Polymeric Materials - Determination of Tear Strength
DIN 54836 Testing of combustible materials; determination of ignition temperature
DIN 54837 Determination of burning behaviour using a gas burner
DIN 55003-3 Machine tools; symbols; numerically controlled machine tools
DIN 58810 Surgical implants; threads for bone screws and nuts
DIN 58888 Thread connection for microscope objectives
DIN ISO 53438
DIN 60000 to DIN 69999[edit]
DIN TITLE
DIN 66000 Information processing; switching algebra, mathematical signs and symbols
DIN 66001 Information processing; graphical symbols and their application
DIN 66002 Information processing; handwriting of the digit 0 and of the upper case letter O
DIN 66003 Information technology - 7-bit code
DIN 66004-1 Information processing - Coding on data media - Part 1: Representation of 7-bit code character sets on punched tape 25
DIN 66004-2
Information processing - Coding on data media - Part 2: Representation of 7-bit coded and 8-bit coded character sets on punched
cards
DIN 66004-3
Information processing - Coding on data media - Part 3: Representation of 7-bit coded and 8-bit coded character sets on magnetic
tape 12
DIN 66004-4
Information processing - Coding on data media - Part 4: Representation of 7-bit coded and 8-bit coded character sets on magnetic
tape cassette 3,8
DIN 66004-5
Information processing - Coding on data media - Part 5: Representation of 7-bit coded and 8-bit coded set on media-flexible disk
cartridge
68 | P a g e
DIN TITLE
DIN 66005 Information processing; representation of packed numerics and binary data recorded on 9 tracks on magnetic tape 12
DIN 66006 Presentation ofALGOL/ALCORprograms onpaper tape andpunch cards
DIN 66007 Font CMC 7 for magnetic ink character recognition; characters and nominal dimensions
DIN 66008-1 Font A for optical character recognition; characters and nominal dimensions
DIN 66008-6 Font A for optical character recognition; characters and nominal dimensions; extension of the character set
DIN 66008-7 Font A for optical character recognition; representation of characters by dots in a 9 × 9 matrix
DIN 66009 Font B for optical character recognition; character
DIN 66020-1
Functional requirements for the interface between data terminal equipment and data circuit-terminating equipment - Part 1:
General application
DIN 66020-2
List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE)
in public data networks
DIN 66020-4 Data transmission; interface between data circuit-terminating equipment (DCE) and data terminal equipment (DTE)
DIN 66020-9
Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for synchronous transmission on
group band circuits at 48000 bits per second
DIN 66021-1 Data transmission; interface between data circuit-terminating equipment (DCE) and data terminal equipment (DTE)
DIN 66021-2
Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for synchronous transmission on
group band circuits at 48000 bits per second
DIN 66025-1 Numerical control of machines, format; general requirements
DIN 66025-2 Industrial automation; numerical control of machines; format, preparatory and miscellaneous functions
DIN 66027 Information processing; programming languageFORTRAN
DIN 66215-1 Programming of numerically controlled machines; CLDATA, general structure and record types
DIN 66215-2 Programming of numerically controlled machines; CLDATA; minor elements of type 2000 records (post-processor commands)
DIN 66253-2 Information processing; programming languagePEARL
DIN 66234 Information processing; programming language PL/I
DIN 66255 Information processing; programming language PL/I
DIN 66256 Information processing; programming languagePascal
DIN 66257 Numerical control of machines; concepts
DIN 66258-1 Interfaces and basic data link control procedures for data communication; C S-interface, V S-interface
DIN 66258-2
Interface and basic data link control procedures for data communication; balanced interface for start-stop transmission using basic
data link control procedures on point-to-point connection
DIN 66261 Information processing; Nassi-Shneiderman flowchart symbols
DIN 66264-1
Industrial automation systems and integration - Multiprocessor Control System for Industrial Machines (MPST) - Part 1: Parallel
bus
DIN 66264-2 Multiprocessor control system for industrial machines (MPST); industrial automatics; rules for information interchange
DIN 66303 Information technology - 8 bit code
DIN V 66304 Industrial automation; Computer Aided Design; format for the exchange of standard parts data
DIN 66325-2 Local and Metropolitan Area Networks; LLC; identical with ISO 8802-2:1989
DIN 66325-4 Local and Metropolitan Area Networks; token-passing bus access method; identical with ISO/IEC 8802-4:1990
DIN 69901 Project controlling; project management; concepts
DIN 70000 to DIN 79999[edit]
DIN TITLE
DIN 71412 Lubricating nipples; cone type
DIN 72311-1 Lead storage batteries; starter batteries for motorcycles, nominal capacities, main dimensions
DIN 72311-4 Lead storage batteries; starter batteries, terminals, vent plugs and filler openings
DIN 72311-8 Lead storage batteries; starter batteries for motor cycles and passenger cars
69 | P a g e
DIN TITLE
DIN 72311-13
Lead storage batteries; starter batteries for starting, lighting and ignition, 12 V, 27, 36, 45 and 54 Ah, for lateral basic fastening
10,5
DIN 72311-16
Lead storage batteries; starter batteries for starting, lighting and ignition, 12 V, 27, 36, 45, 54 and 63 Ah, for lateral basic fastening
19
DIN 72311-17 Lead storage batteries; starter batteries, protective covering for terminal
DIN 72311-18
Lead storage batteries; starter batteries with basic fastening 10,5 for passenger cars and commercial vehicles; nominal capacities,
main dimensions
DIN 72311-20 Lead storage batteries; starter batteries for commercial vehicles; nominal capacities and main dimensions
DIN 72311-21
Lead storage batteries; starter batteries with 10,5 basic fastening lugs for commercial vehicles; nominal capacities and main
dimensions
DIN 72552-1 Terminalmarkings formotor vehicles; scope, principles, requirements
DIN 72552-2 Terminalmarkings formotor vehicles; codes
DIN 72552-3 Terminalmarkings formotor vehicles; examples for application on circuit diagrams
DIN 72552-4 Terminalmarkings formotor vehicles; summary
DIN 75490 Radio communication devices in motor vehicles; installation space, general requirements
70 | P a g e
European Committee for Standardization
The European Committee for Standardization (CEN, French: Comité Européen de Normalisation) is a non-profit organisation whose mission is to foster the European economy in global trading, the welfare of European citizens and the environment by providing an efficient infrastructure to interested parties for the development, maintenance and distribution of coherent sets of standards and specifications.
The CEN was founded in 1961. Its thirty national members work together to develop European Standards (ENs) in various sectors to build a Europeaninternal market for goods and services and to position Europe in the global economy. CEN is officially recognised as a European standards body by the European Union; the other official European standards bodies are the European Committee for Electrotechnical Standardization (CENELEC) and the European Telecommunications Standards Institute (ETSI).
More than 60,000 technical experts as well as business federations, consumer and other societal interest organisations are involved in the CEN network that reaches over 460 million people. CEN is the officially recognized standardisation representative for sectors other than electrotechnical (CENELEC) and telecommunications (ETSI). On 12 February 1999 the European Parliament noted in a resolution that CEN, CENELEC and ETSI co-operate smoothly and that a merger of the three standardisaton bodies would not have clear advantages.
The standardisation bodies of the thirty national members represent the twenty seven member states of the European Union, three countries of the European Free Trade Association(EFTA) and countries which are likely to join the EU or EFTA in the future. CEN is contributing to the objectives of the European Union and European Economic Area with technical standards (EN standards) which promote free trade, the safety of workers and consumers, interoperability of networks, environmental protection, exploitation of research and development programmes, and public procurement. An example of mandatory standards are those for materials and products used in construction and listed under the Construction Products Directive. The CE mark is a declaration by the manufacturer that a product complies with the respective EU directive and hence the harmonized standard(s) referenced by the directive(s).
CEN (together with CENELEC) owns the Keymark, a voluntary quality mark for products and services. A product bearing the Keymark demonstrates conformity to European Standards.
The Vienna Agreement
The Vienna Agreement was signed by CEN and the International Organization for Standardization (ISO) in 1991 but came in force in the mid-2000s. Its primary aim is to avoid duplication of (potentially conflicting) standards between CEN and ISO. In the last decade CEN has adopted a number of ISO standards which replaced the corresponding CEN standards. LIST OF EN STANDARDS
EN 1–999
EN 1: Flued oil stoves with vaporizing burners
EN 2: Classification of fires
EN 3: Portable fire extinguishers
EN 54: Fire detection and fire alarm systems
EN 71: Safety of toys
EN 81: Safety of lifts
EN 115: Safety of escalators & Moving walks
EN 166: Personal eye protection. Specifications
EN 196: Methods for testing cement (10 parts)
EN 197-1: Cement – Part 1 : Composition, specifications and conformity criteria for common cements
EN 197-2: Cement – Part 2 : Conformity evaluation
EN 206-1: Concrete – Part 1: Specification, performance, production and conformity
EN 207: Classification and specifications of filters and eye protection against laser
EN 208: Classification of eye protection filters for laser alignment
EN 228: Specifications for automotive petrol
EN 250: Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking
members affiliates partner standardisation bodies
71 | P a g e
EN 287-1: "Qualification test of welders — Fusion welding — Part 1: Steels" (2011)
EN 294: Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs
EN 298: Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
EN 336: Structural timber — Sizes, permitted deviations
EN 338: Structural timber — Strength classes
EN 341: Personal protective equipment against falls from a height. Descender devices
EN 352-2: Revised 2002 standards on hearing protectors. Safety requirements and testing, generally about earplugs.
EN 353-1: Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor
EN 353-2: Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line
EN 354: Personal protective equipment against falls from a height. Lanyards
EN 355: Personal protective equipment against falls from a height. Energy absorbers
EN 358: Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and
restraint and work positioning lanyards
EN 360: Personal protective equipment against falls from a height. Retractable type fall arresters
EN 361: Personal protective equipment against falls from a height. Full body harnesses
EN 362: Personal protective equipment against falls from a height. Connectors
EN 363: Personal protective equipment against falls from a height. Fall arrest systems
EN 374: Protective gloves against chemicals and micro-organisms
EN 386: Glued laminated timber - Performance requirements and minimum production requirements
EN 388: Protective gloves against mechanical risks
EN 390: Glued laminated timber. Sizes. Permissible deviations
EN 391: Glued laminated timber - Delamination tests of glue lines
EN 392: Glued laminated timber - Shear test of glue lines
EN 397: Specification for industrial safety helmets
EN 408: Structural timber and glued laminated timber — Determination of some physical and mechanical properties
EN 417: Non-refillable metallic cartridges for liquefied petroleum gases
EN 420: Protective gloves. General requirements and test methods
EN 438: Decorative high-pressure laminates (HPL) sheets based on thermosetting resins.
EN 440: "Welding consumables wire electrodes and deposits for gas shielded metal arc welding of non-alloy and fine grain steel -
Classification" (1994)
EN 474: Earth-moving Machinery. Safety. General Requirements
EN 450: Fly ash for concrete - Definitions, requirements and quality control
EN 518: Structural timber. Grading. Requirements for visual strength grading standards (replaced by EN 14081-1)
EN 519: Structural timber. Grading. Requirements for machine strength graded timber and grading machines (Replaced by EN
14081-1)
EN 567: Mountaineering equipment. Rope clamps. Safety requirements and test methods
EN 590: Specification for automotive diesel
EN 694: Fire-fighting hoses. Semi-rigid hoses for fixed systems
EN 716: Children's cots and folding cots for domestic use
EN 795: Protection against falls from a height. Anchor devices. Requirements and testing
EN 805: Water supply. Requirements for systems and components outside buildings
EN 813: Personal protective equipment for prevention of falls from a height. Sit harnesses
EN 837: Pressure connections
EN 840: Mobile waste containers.
EN 877: Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test
methods and quality assurance
EN 933-1: Test for geometrical properties of aggregates - Part 1: determination of particle size distribution - Sieving method
72 | P a g e
EN 934-2: Admixtures for concrete, mortar and grout - Part 2: concrete admixtures - Definitions and requirements
EN 962-1: Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength
EN 962-2: Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics
EN 1000–1899
EN 1069: Water slides of 2 m height and more
EN 1078: Helmets for pedal cyclists and for users of skateboards and roller skates
EN 1090: Execution of steel structures and aluminium structures (3 parts)
EN 1092: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated
EN 1168: Precast concrete products - Hollow core slabs
EN 1176-1: Playground equipment. General safety requirements and test methods
EN 1177: Impact absorbing playground surfacing. Safety requirements and test methods
EN 1325-1: Vocabulary of Value Management, Value Evaluation and Functional Analysis
EN 1337: Structural bearings
EN 1399: Resilient floor coverings. Determination of resistance to stubbed and burning cigarettes
EN 1401: Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-
U)
EN 1496: Personal fall protection equipment. Rescue lifting devices
EN 1679: Reciprocating internal combustion engines: Compression ignition engines
EN 1815: Resilient and textile floor coverings. Assessment of static electrical propensity
EN 1891: Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes
EN 1990–1999 (Eurocodes)
EN 1990: (Eurocode 0) Basis of structural design
EN 1991: (Eurocode 1) Actions on structures
EN 1992: (Eurocode 2) Design of concrete structures
EN 1993: (Eurocode 3) Design of steel structures
EN 1994: (Eurocode 4) Design of composite steel and concrete structures
EN 1995: (Eurocode 5) Design of timber structures
EN 1996: (Eurocode 6) Design of masonry structures
EN 1997: (Eurocode 7) Geotechnical design
EN 1998: (Eurocode 8) Design of structures for earthquake resistance
EN 1999: (Eurocode 9) Design of aluminium structures
EN 10000–10999
This range includes almost exclusively CEN Standards related to iron and steel.
EN 10002: Metallic Materials - Tensile Testing
EN 10002-1: Method of Test at Ambient Temperature
EN 10025: Hot rolled products of structural steels
EN 10025-1: Part 1: General technical delivery conditions
EN 10025-2: Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025-3: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN 10025-4: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10025-5: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
73 | P a g e
EN 10025-6:Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and
tempered condition
EN 10027: Designation systems for steel.
EN 10240: Internal and/or external protective coating for steel tubes - specification for hot dip galvanized coatings applied in
automatic plants
EN 11000–49999
EN 12103: Resilient floor coverings - Agglomerated cork underlays - specification
EN 12104: Resilient floor coverings - Cork floor tiles - Specification
EN 12105: Resilient floor coverings - Determination of moisture content of agglomerated composition cork
EN 12199: Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
EN 12221: Changing units for domestic use
EN 12246: Quality classification of timber used in pallets and packaging
EN 12277: Mountaineering and climbing harnesses
EN 12281: Printing and business paper. Requirements for copy paper.
EN 12345: Welding. Multilingual terms for welded joints with illustrations
EN 12492: Helmets for mountaineering
EN 12600: Classification of Resistance of Glazing to Impact
EN 12890: Patterns, pattern equipment and coreboxes for the production of sand molds and sand cores
EN 12952: Water-Tube Boilers And Auxiliary Installations
EN 12973: Value Management
EN 12975-1: Thermal solar systems and components - Solar collectors
EN 13133: "Brazing - Brazer approval" (2000)
EN 13145: Railway applications - Track - Wood sleepers and bearers
EN 13146: Railway applications - Track - Test methods for fastening systems
EN 13162:2013-03: Thermal insulation products for buildings - Factory made mineral wool (MW) products
EN 13204: Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements[2]
EN 13300: quality and classification of (interior) wall paint
EN 13402: Size designation of clothes
EN 13432: Compostable and biodegradable packaging
EN 13445: Unfired pressure vessels
EN 13480: Metallic industrial piping
EN 13501: Fire classification of construction products and building elements
EN 13537: Temperature ratings for sleeping bags
EN 13594:2002: Protective gloves for professional motorcycle riders. Requirements and test methods
EN 13595-1:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. General
requirements
EN 13595-2:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test
method for determination of impact abrasion resistance
EN 13595-3:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test
method for determination of burst strength.
EN 13595-4:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test
methods for the determination of impact cut resistance
EN 13612: Performance evaluation of in-vitro diagnostic devices
EN 13634:2002: Protective footwear for professional motorcycle riders. Requirements and test methods
EN 13640: Stability testing of in vitro diagnostic reagents
74 | P a g e
EN 13757: Communication system for meters and remote reading of meters (Meter-Bus)
EN 14081-1: Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 14081-2: Timber structures — Strength graded structural timber with rectangular cross section — Part 2 : Machine grading;
additional requirements for initial type testing.
EN 14081-3:Timber structures — Strength graded structural timber with rectangular cross section — Part 3: Machine grading;
additional requirements for factory production control.
EN 14081-4:Timber structures — Strength graded structural timber with rectangular cross section — Part 4: Machine grading;
grading machine settings for machine controlled systems.
EN 14214: The pure biodiesel standard
EN 14511: Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and
cooling
EN 14904: Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
EN 14988-1:2006: Children's High chairs. Part 1: Safety requirements
EN 14988-2:2006: Children's High chairs. Part 2: Test methods
EN 15531: Service Interface for Real Time Information
EN 15595: Railway applications - Braking - Wheel slip prevention equipment [3]
EN 15744: Film identification — Minimum set of metadata for cinematographic works
EN 15838: Customer Contact Centres - Requirements for service provision
EN 15883: Washer-disinfectors
EN 15907: Film identification — Enhancing interoperability of metadata - Element sets and structures
EN 16001: Energy management systems; withdrawn, replaced by ISO 50001
EN 45502-1: Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided
by the manufacturer
EN 50000–59999 (CEN specific, non-IEC electrical standards)
EN 50022: 35 mm snap-on top-hat mounting rails for low-voltage switchgear (DIN rail)
EN 50075: Europlug
EN 50090: Home and Building Electronic Systems (KNX/EIB)
EN 50102: Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts
EN 50119: Railway applications - Fixed installations: Electric traction overhead contact lines for railways
EN 50121-1: Railway applications - Electromagnetic compatibility Part 1: General
EN 50121-2: Railway applications - Electromagnetic compatibility - Part 2 : emission of the whole railway system to the outside
world
EN 50121-3-1: Railway applications - Electromagnetic compatibility - Part 3-1 : rolling stock - Train and complete vehicle
EN 50121-3-2: Railway applications - Electromagnetic compatibility - Part 3-2 : rolling stock - Apparatus
EN 50121-4: Railway applications - Electromagnetic compatibility - Part 4 : emission and immunity of the signalling and
telecommunications apparatus
EN 50121-5: Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply
installations and apparatus
EN 50122-1: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective
provisions against electric shock
EN 50122-2: Railway applications - Fixed installations - Part 2: Protective provisions against the effects of Stray currents caused by
d.c. traction systems
EN 50122-3: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction
of a.c. and d.c. traction systems
EN 50123: Railway applications - Fixed installations - D.C. switchgear
EN 50124: Railway applications - Insulation coordination
EN 50125-2: Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
75 | P a g e
EN 50125-3: Railway applications - Environmental conditions for equipment - Part 3: Equipment for signalling and
telecommunications
EN 50126: Railway applications - The specification and demonstration of reliability, availability, maintainability and safety (RAMS)
EN 50128: Railway applications - Communications, signalling and processing systems
EN 50129: Railway applications - Communications, signalling and processing systems - Safety related electronic systems for
signalling
EN 50130: Alarm systems - Electromagnetic compatibility and Environmental test methods
EN 50131: Alarm systems - Intrusion and hold-up systems
EN 50136: Alarm systems - Alarm transmission systems
EN 50155: Railway applications - Electronic equipment used on rolling stock [4]
EN 50157: Domestic and Similar Electronic Equipment Interconnection Requirements (Part1 = AV.link)
EN 50159: Railway applications - Communication, signalling and processing systems - Safety-related communication in
transmission systems
EN 50159-1: Railway applications - Communication, signalling and processing systems - Part 1: Safety-related communication in
closed transmission systems
EN 50159-2: Railway applications - Communication, signalling and processing systems - Part 2: Safety-related communication in
open transmission systems
EN 50163: railway applications supply voltages of traction systems
EN 50178: Electronic equipment for use in power installations
EN 50262: Metric cable glands
EN 50267: Corrosive Gasses
EN 50522: Earthing of power installations exceeding 1 kV a.c.
EN 50308: Wind Turbines - Protective Measures - Requirements for design, operation and maintenance
EN 50325: Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces
EN 55014: Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus
EN 55022: Information technology equipment. Radio disturbance characteristics.
EN 55024: Information technology equipment. Immunity characteristics
EN 60000-69999 (CEN editions of IEC standards)
EN 60065: Audio, Video and similar electronics apparatus - Safety requirements
EN 60950-1: Information technology equipment - Safety - Part1: General requirements
EN 61000: Electromagnetic compatibility
76 | P a g e
Japanese Industrial Standards
Japanese Industrial Standards (JIS) (日本工業規格 Nippon Kōgyō Kikaku?) specifies the standards used for industrial activities in Japan. The standardization process is coordinated by Japanese Industrial Standards Committee and published through Japanese Standards Association.
History
In the Meiji era, private enterprises were responsible for making standards although the Japanese government did have standards and specification documents for procurement purposes for certain articles, such as munitions.
These were summarized to form an official standard (old JES) in 1921. During World War II, simplified standards were established to increase matériel output.
The present Japanese Standards Association was established after Japan's defeat in World War II in 1945. The Japanese Industrial Standards Committee regulations were promulgated in 1946, Japanese standards (new JES) was formed.
The Industrial Standardization Law was enacted in 1949, which forms the legal foundation for the present Japanese Industrial Standards (JIS).
The Industrial Standardization Law was revised in 2004 and the "JIS mark" (product certification system) was changed; since October 1, 2005, the new JIS mark has been applied upon re-certification. Use of the old mark was allowed during the three-year transition period (until September 30, 2008), and every manufacturer obtaining new or renewing certification under the authority's approval has been able to use the new JIS mark. Therefore all JIS-certified Japanese products have had the new JIS mark since October 1, 2008.
Standards classification and numbering
Standards are named like "JIS X 0208:1997", where X denotes area division, followed by four digits (or five digits for some of the standards corresponding ISO standards), and the revision release year. Divisions of JIS and significant standards are:
A – Civil Engineering and Architecture
B – Mechanical Engineering o JIS B 7021-1989 – Classification and Water Resistibility of Water Resistant Watches for General Use o JIS B 7512-1993 – Steel tape measures o JIS B 7516-1987 – Metal Rules
C – Electronic and Electrical Engineering o JIS C 0920:2003 – Degrees of protection provided by enclosures (IP Code) o JIS C 7012 Type designation system for discrete semiconductor devices o JIS C 8800 Glossary of terms for fuel cell power systems
D – Automotive Engineering
E – Railway Engineering
F – Ship building
G – Ferrous Materials and Metallurgy
H – Nonferrous materials and metallurgy[1] o JIS H 2105 – Pig lead o JIS H 2107 – Zinc ingots o JIS H 2113 – Cadmium metal o JIS H 2116 – Tungsten powder and tungsten carbide powder o JIS H 2118 – Aluminum alloy ingots for die castings o JIS H 2121 – Electrolytic cathode copper o JIS H 2141 – Silver bullion o JIS H 2201 – Zinc alloy ingots for die casting o JIS H 2202 – Copper alloy ingots for castings o JIS H 2211 – Aluminium alloy ingots for castings o JIS H 2501 – Phosphor copper metal o JIS H 3100 – Copper and copper alloy sheets, plates and strips o JIS H 3110 – Phosphor bronze and nickel silver sheets, plates and strips o JIS H 3130 – Copper beryllium alloy, copper titanium alloy, phosphor bronze, copper-nickel-tin alloy and nickel silver
sheets, plates and strips for springs o JIS H 3140 – Copper bus bars o JIS H 3250 – Copper and copper alloy rods and bars o JIS H 3260 – Copper and copper alloy wires o JIS H 3270 – Copper beryllium alloy, phosphor bronze and nickel silver rods, bars and wires
77 | P a g e
o JIS H 3300 – Copper and copper alloy seamless pipes and tubes o JIS H 3320 – Copper and copper alloy welded pipes and tubes o JIS H 3330 – Plastic covered copper tubes o JIS H 3401 – Pipe fittings of copper and copper alloys o JIS H 4000 – Aluminium and aluminium alloy sheets and plates, strips and coiled sheets o JIS H 4001 – Painted aluminium and aluminium alloy sheets and strips o JIS H 4040 – Aluminium and aluminium alloy rods, bars and wires o JIS H 4080 – Aluminium and aluminium alloys extruded tubes and cold-drawn tubes o JIS H 4090 – Aluminium and aluminium alloy welded pipes and tubes o JIS H 4100 – Aluminium and aluminium alloy extruded shape o JIS H 4160 – Aluminium and aluminium alloy foils o JIS H 4170 – High purity aluminium foils o JIS H 4301 – Lead and lead alloy sheets and plates o JIS H 4303 – DM lead sheets and plates o JIS H 4311 – Lead and lead alloy tubes for common industries o JIS H 4461 – Tungsten wires for lighting and electronic equipments o JIS H 4463 – Thoriated tungsten wires and rods for lighting and electronic equipment o JIS H 4631 – Titanium and titanium alloy tubes for heat exchangers o JIS H 4635 – Titanium and titanium alloy welded pipes o JIS H 5401 – White metal o JIS H 8300 – Thermal spraying―zinc, aluminium and their alloys o JIS H 8601 – Anodic oxide coatings on aluminium and aluminium alloys o JIS H 8602 – Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys o JIS H 8615 – Electroplated coatings of chromium for engineering purposes o JIS H 8641 – Zinc hot dip galvanizings o JIS H 8642 – Hot dip aluminized coatings on ferrous products
K – Chemical Engineering
L – Textile Engineering
M – Mining
P – Pulp and Paper o JIS P 0138-61 (JIS P 0138:1998): process finished paper size (ISO 216 with a slightly larger B series)
Q – Management System o JIS Q 9001 - Quality management systems - requirements o JIS Q 14001 - Environment management systems - requirements with guidance for use o JIS Q 15001 - Personal information protection management systems - requirements o JIS Q 20000-1 - IT service management - specification o JIS Q 27001 - Information security management systems - requirements
R – Ceramics
S – Domestic Wares
T – Medical Equipment and Safety Appliances
W – Aircraft and Aviation
X – Information Processing o JIS X 0201:1997 – Japanese national variant of the ISO 646 7-bit character set o JIS X 0202:1998 – Japanese national standard which corresponds to the ISO 2022 character encoding o JIS X 0208:1997 – 7-bit and 8-bit double byte coded kanji sets for information interchange o JIS X 0212:1990 – Supplementary Japanese graphic character set for information interchange o JIS X 0213:2004 – 7-bit and 8-bit double byte coded extended Kanji sets for information interchange o JIS X 0221-1:2001 – Japanese national standard which corresponds to ISO 10646 o JIS X 0401:1973 – To-do-fu-ken (prefecture) identification code o JIS X 0402:2003 – Identification code for cities, towns and villages o JIS X 0405:1994 – Commodity classification code o JIS X 0408:2004 – Identification code for universities and colleges o JIS X 0501:1985 – Bar code symbol for uniform commodity code o JIS X 0510:2004 – QR Code o JIS X 3001-1:2009, JIS X 3001-2:2002, JIS X 3001-3:2000 – Fortran programming language o JIS X 3002:2001 – COBOL o JIS X 3005-1:2010 – SQL o JIS X 3010:2003 – C programming language o JIS X 3014:2003 – C++ o JIS X 3030:1994 – POSIX - repealed in 2010 o JIS X 4061:1996 – Collation of Japanese character string o JIS X 6002:1980 – Keyboard layout for information processing using the JIS 7 bit coded character set o JIS X 6054-1:1999 – MIDI o JIS X 6241:2004 – 120 mm DVD – Read-only disk o JIS X 6243:1998 – 120 mm DVD Rewritable Disk (DVD-RAM) o JIS X 6245:1999 – 80 mm (1.23GB/side) and 120 mm (3.95GB/side) DVD-Recordable-Disk (DVD-R) o JIS X 9051:1984 – 16-dots matrix character patterns for display devices o JIS X 9052:1983 – 24-dots matrix character patterns for dot printers
78 | P a g e
Z – Miscellaneous o JIS Z 8301:2011 – Rules for the layout and drafting of Japanese Industrial Standards
79 | P a g e
International Electrotechnical Commission Introduction The International Electrotechnical Commission[1] (IEC; Commission électrotechnique internationale (CEI), in French) is a non-profit, non-governmental international standards organization that prepares and publishes International Standards for all electrical, electronic and related technologies – collectively known as "electrotechnology". IEC standards cover a vast range of technologies from power generation, transmission and distribution to home appliances and office equipment, semiconductors, fibre optics, batteries, solar energy, nanotechnology and marine energy as well as many others. The IEC also manages three global conformity assessment systems that certify whether equipment, system or components conform to its International Standards. The IEC charter embraces all electrotechnologies including energy production and distribution, electronics, magnetics and electromagnetics, electroacoustics, multimedia, telecommunication and medical technology, as well as associated general disciplines such as terminology and symbols, electromagnetic compatibility (by its Advisory Committee on Electromagnetic Compatibility, ACEC), measurement and performance, dependability, design and development, safety and the environment.
History The IEC held its inaugural meeting on 26 June 1906, following discussions between the British Institution of Electrical Engineers, the American Institute of Electrical Engineers, and others, which began at the 1900 Paris International Electrical Congress, and continued with Colonel R. E. B. Crompton playing a key role. Currently, 82 countries are members while another 82 participate in the Affiliate Country Programme, which is not a form of membership but is designed to help industrializing countries get involved with the IEC. Originally located in London, the commission moved to its current headquarters in Geneva in 1948. It has regional centres in Asia-Pacific (Singapore), Latin America (São Paulo, Brazil) and North America (Boston, United States). Today, the IEC is the world's leading international organization in its field, and its standards are adopted as national standards by its members. The work is done by some 10,000 electrical and electronics experts from industry, government, academia, test labs and others with an interest in the subject. The IEC was instrumental in developing and distributing standards for units of measurement, particularly Gauss, Hertz, and Weber. They also first proposed a system of standards, the Giorgi System, which ultimately became the SI, or Système International d’unités (in English, the International System of Units). In 1938, it published a multilingual international vocabulary to unify electrical terminology. This effort continues, and the International Electrotechnical Vocabulary remains an important work in the electrical and electronic industries. The CISPR (Comité International Spécial des Perturbations Radioélectriques) – in English, the International Special Committee on Radio Interference – is one of the groups founded by the IEC.
List Of Standards IEC 60027 Letter symbols to be used in electrical technology
IEC 60028 International standard of resistance for copper
IEC 60034 Rotating electrical machinery
IEC 60038 IEC Standard Voltages
IEC 60041 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
IEC 60044 Instrument transformers
IEC 60045 Steam turbines - Part 1: Specifications
IEC 60050 International Electrotechnical Vocabulary
IEC 60055 Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV
IEC 60060 High-voltage test techniques
IEC 60062 Marking codes for resistors and capacitors
IEC 60063 Preferred number series for resistors and capacitors
IEC 60061 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1 to 4 (60061-X)
IEC 60064 Tungstun filament type GLS (General Lighting Solutions) bulbs
IEC 60065 Audio, video and similar electronic apparatus – Safety requirements
IEC 60068 Environmental Testing
IEC 60071 Insulation Co-ordination
IEC 60073 Basic Safety principles for man-machine interface, marking and identification
IEC 60076 Power transformers
IEC 60077 Railway applications - Electric equipment for rolling stock
IEC 60079 Parts 1–34 Explosive Atmospheres
IEC 60083 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
IEC 60085 Electrical insulation
IEC 60086 Primary batteries
IEC 60092 Electrical installations on ships
IEC 60094 Magnetic tape sound recording and reproducing systems
IEC 60095-1 Lead-acid starter batteries; part 1: general requirements and testing methods
IEC 60096 Radio-frequency cables
IEC 60098 Rumble measurement on Vinyl Disc Turntables
80 | P a g e
IEC 60099 Surge arresters
IEC 60119 The Electrical Performance of Semiconductor Rectifiers (Metal Rectifiers)
IEC 60134 Absolute maximum and design ratings of tube and semiconductor devices
IEC 60137 Bushings for alternating voltages above 1000V
IEC 60146 Semiconductor Converters
IEC 60169 Radio-frequency connectors
IEC 60183 Guide to the selection of high voltage cables
IEC 60193 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
IEC 60204 Safety of machinery - [1]
IEC 60214 On-load tap changers
IEC 60228 Conductors of insulated cables
IEC 60233 Tests on Hollow Insulators for use in Electrical Equipment
IEC 60238 Edison screw Lamp Holders
IEC 60239 Graphite electrodes for electric arc furnaces – Dimensions and designation
IEC 60245 Rubber-Insulated Cables
IEC 60254 Surge Withstands Capability (SWC)
IEC 60255 Electrical Relays
IEC 60268 Sound system equipment
IEC 60269 Low voltage fuses
IEC 60270 High-Voltage Test Techniques – Partial Discharge Measurements
IEC 60273 Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000V
IEC 60287 Calculation of permissible current in cables at steady state rating
IEC 60296 Mineral Insulating oils for transformers & switchgear
IEC 60297 Dimensions of mechanical structures of the 482.6 mm (19 in) series
IEC 60298 high voltage switchgear in metallic enclosure
IEC 60308 Hydraulic turbines - Testing of control systems
IEC 60309 Plugs, socket-outlets and couplers for industrial purposes
IEC 60317 Specifications for particular types of winding wires
IEC 60320 Appliance couplers for household and similar general purposes
IEC 60331 Tests for Electric Cables under Fire Conditions
IEC 60335 Safety of electrical household appliances
IEC 60364 Electrical installations of buildings
IEC 60397 Test methods for batch furnaces with metallic heating resistors
IEC 60398 Installations for electroheating and electromagnetic processing - General test methods
IEC 60417 Graphical symbols for use on equipment
IEC 60439 Low voltage switchgear and control gear assemblies
IEC 60445 Basic and safety principles for man-machine interface
IEC 60446 Wiring colours
IEC 60457 Method of sampling insulating liquids
IEC 60479 Effects of current on human beings and livestock
IEC 60502 Power cables with extruded insulation and their accessories for rated voltages from 1kV up to 30kV
IEC 60519 Safety in installations for electroheating and electromagnetic processing
IEC 60529 Degrees of protection provided by enclosures (IP Code)
IEC 60545 Guide for commissioning, operation and maintenance of hydraulic turbines
IEC 60571 Electronic equipment used on rail vehicles
IEC 60574 Audio-visual, video and television equipment and systems
IEC 60598 Luminaires
IEC 60559 Binary floating-point arithmetic for microprocessor systems
IEC 60601 Medical Electrical Equipment
IEC 60603 Connectors for frequencies below 3 MHz for use with printed boards
IEC 60609 Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines
IEC 60617 Graphical symbols for diagrams
IEC 60651 Sound level meters
IEC 60662 High-pressure sodium lamp - Performance specifications
IEC 60664 Insulation coordination for equipment within low-voltage systems
IEC 60669 Switches for household and similar fixed-electrical installations
IEC 60676 Industrial electroheating equipment - Test methods for direct arc furnaces
IEC 60680 Test methods of plasma equipment for electroheat and electrochemical applications
IEC 60683 Test methods for submerged arc furnaces
IEC 60694 Common Specifications For High-Voltage Switchgear and Controlgear Standards
81 | P a g e
IEC 60703 Test methods for electroheating installations with electron guns
IEC 60715 Dimensions of low-voltage switchgear and controlgear. Standardised mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations.
IEC 60721 Classification of environmental conditions
IEC 60726 Dry type power transformers
IEC 60728 Cable networks for television signals, sound signals and interactive services
IEC 60730 Class B certification requirements for appliances.
IEC 60747 Semiconductor devices; Part 1: General
IEC 60748 Semiconductor devices – integrated circuits
IEC 60760 Flat, quick-connect terminations (merged into IEC 61210:2010-08)
IEC 60774 VHS/S-VHS video tape cassette system
IEC 60793 Optical fibres
IEC 60779 Test methods for electroslagremelting furnaces
IEC 60801 EMI and RFI Immunity
IEC 60805 Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps
IEC 60809 Filament lamps for road vehicles - Dimensional, electrical and luminous requirements
IEC 60812 International Standard on Fault Mode and Effects Analysis
IEC 60815 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions
IEC 60825 Laser safety
IEC 60826 Design criteria of overhead transmission lines
IEC 60849 Sound Systems for Emergency Purposes
IEC 60865-1 Short Circuit Current: Calculation of Effects
IEC 60870 Telecontrol equipment and systems
IEC 60874 Connectors for optical fibres
IEC 60884 Plugs and socket-outlets for household and similar purposes
IEC 60898 Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations.
IEC 60906 IEC system of plugs and socket-outlets for household and similar purposes
IEC 60908 Compact disk digital audio system
IEC 60909 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
IEC 60921 Ballasts for tubular fluorescent lamps – Performance requirements
IEC 60929 AC-supplied electronic ballasts for tubular fluorescent lamps – Performance requirements
IEC 60942 Electroacoustics – Sound calibrators
IEC 60945 Maritime Navigation and Radiocommunication Equipment and Systems – General Requirements – Methods of Testing and Required Test Results
IEC 60947 Standards for low-voltage switchgear and controlgear
IEC 60950 Safety of information technology equipment
IEC 60994 Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
IEC 61000 Electromagnetic compatibility (EMC)
IEC 61008 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
IEC 61009 Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBO's)
IEC 61010 Safety requirements for electrical equipment for measurement, control and laboratory use
IEC 61024 Protection of structures against lightning
IEC 61025 Fault tree analysis
IEC 61030 Domestic Digital Bus - a standard for a low-speed multi-master serial communication bus for home automation applications.
IEC 61043 Sound intensity meters with pairs of microphones
IEC 61058 Switches for Appliances
IEC 61084 Cable trunking and ducting systems for electrical installations
IEC 61097 Global maritime distress and safety system (GMDSS)
IEC 61116 Electromechanical equipment guide for small hydroelectric installations
IEC 61131 Programmable Logic Controllers
IEC 61149 Safety of mobile radios
IEC 61156 Multicore and symmetrical pair/qud cables for digital communications
IEC 61158 Industrial communication networks – Fieldbus specifications
IEC 61162 Maritime navigation and radiocommunication equipment and systems, Digital Systems
IEC 61164 Reliability growth – Statistical test and estimation methods
IEC 61174 Maritime Navigation and Radio Communications, Electronic Chart Display and Information System (ECDIS)
IEC 61194 Characteristic parameters of stand-alone photovoltaic (PV) systems
IEC 61210 Connecting devices – Flat quick-connect terminations for electrical copper conductors – Safety requirements
82 | P a g e
IEC 61211 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture testing in air
IEC 61215 Crystalline silicon terrestrial photovoltaic (PV) modules – Design qualification and type approval
IEC 61238 Compression and mechanical connectors for power cables for rated voltages up to 30 kV
IEC 61241 Electrical apparatus for use in the presence of combustible dust
IEC 61277 Terrestrial photovoltaic (PV) power generating systems – General and guide
IEC 61280 Field testing method for measuring single mode fibre optic cable
IEC 61286 Character set with electrotechnical symbols
IEC 61307 Industrial microwave heating installations – Test methods for the determination of power output
IEC 61308 High-frequency dielectric heating installations – Test methods for the determination of power output
IEC 61326 Electrical equipment for measurement, control and laboratory use – EMC requirements
IEC 61334 Distribution automation using distribution line carrier systems - a standard for low-speed reliable power line communications by electricity meters, water meters and SCADA [2]
IEC 61345 UV test for photovoltaic (PV) modules
IEC 61346 Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations
IEC 61347 Lamp Controlgear
IEC 61355 Classification and designation of documents for plants, systems and equipment
IEC 61362 Guide to specification of hydraulic turbine control systems
IEC 61364 Nomenclature for hydroelectric powerplant machinery
IEC 61366 Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents
IEC 61378 Converter Transformers
IEC 61400 Wind turbines
IEC 61439 Low-Voltage switchgear and controlgear assemblies
IEC 61467 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
IEC 61499 Function blocks
IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems
IEC 61511 Functional safety – safety instrumented systems for the process industry sector
IEC 61513 Functional safety – safety instrumented systems for the Nuclear Industries
IEC 61523 Delay and Power Calculation Standards
IEC 61523-1 Delay and power calculation standards - Part 1: Integrated circuit delay and power calculation systems
IEC 61523-3 Delay and power calculation standards - Part 3: Standard Delay Format (SDF) for the electronic design process
IEC 61537 Cable management – Cable tray systems and cable ladder systems
IEC 61557 Equipment for measuring electrical safety in low-voltage distribution systems
IEC 61558 Safety of power transformers, power supplies, reactors and similar products
IEC 61588 Precision clock synchronization protocol for networked measurement and control systems
IEC 61603 Infrared transmission of audio or video signals
IEC 61642 Industrial a.c. Networks Affected by Harmonics – Application of Filters and Shunt Capacitors
IEC 61643 Surge protective devices connected to low-voltage power distribution systems
IEC 61646 Thin-film terrestrial photovoltaic (PV) modules – Design qualification and type approval
IEC 61672 Electroacoustics – Sound level meters
IEC 61690 Electronic design interchange format, EDIF
IEC 61701 Salt mist corrosion testing of photovoltaic (PV) modules
IEC 61724 Photovoltaic system performance monitoring – Guidelines for measurement
IEC 61727 Photovoltaic (PV) systems – Characteristics of the utility interface
IEC 61730 Photovoltaic modules
IEC 61753 Fibre optic interconnecting devices and passive components performance standard
IEC 61784 Industrial communication networks – Profiles
IEC 61800 Adjustable speed electrical power drive systems
IEC 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations
IEC 61829 Crystalline silicon photovoltaic (PV) array – On-site measurement of I-V characteristics
IEC 61846 Ultrasonics – Pressure pulse lithotripters – Characteristics of fields
IEC 61850 Communication Networks and Systems in Substations
IEC 61883 Consumer audio/video equipment - Digital interface
IEC 61892 Mobile and fixed offshore units, electrical installations
IEC 61922 High-frequency induction heating installations – Test methods for the determination of power output of the generator
IEC 61966 Multimedia systems -- Colour measurement
IEC 61968 Application integration at electric utilities – System interfaces for distribution management
IEC 61970 Application integration at electric utilities – Energy management system application program interface (EMS-API)
IEC 61992 Railway applications - Fixed installations - DC switchgear
IEC 61993 Maritime navigation and radiocommunication equipment and systems.
83 | P a g e
IEC 62006 Hydraulic machines - Acceptance tests of small hydroelectric installations
IEC 62040 Uninterruptible power systems
IEC 62041 EMC requirements for power transformers, power supplies, reactors and similar products
IEC 62056 DLM/COSEM communication protocol for reading utility meters
IEC 62076:2006, Industrial electroheating installations – Test methods for induction channel and induction crucible furnaces
IEC 62087 Methods of measurement for the power consumption of audio, video and related equipment
IEC 62097 Hydraulic machines, radial and axial - Performance conversion method from model to prototype
IEC 62107 Super Video Compact Disc
IEC 62108 Concentrator photovoltaic (CPV) modules and assemblies – Design qualification and type approval
IEC/TR 62157 Cylindrical machined carbon electrodes – Nominal dimensions
IEC 62196 Plugs and sockets for charging electric vehicles
IEC 62256 Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
IEC 62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 62264 Enterprise-control system integration
IEC 62265 Advanced Library Format (ALF) describing Integrated Circuit (IC) technology, cells and blocks
IEC 62270 Hydroelectric power plant automation – Guide for computer-based control
IEC 62271 Standards for high-voltage switchgear and controlgear
IEC 62278 Railway applications – Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
IEC 62282 Fuel cell technologies
IEC 62301 Household electrical appliances – Measurement of standby power
IEC 62304 Medical Device Software – Software Life Cycle Processes
IEC 62305 Protection Against Lightning
IEC 62325 Standards related to energy market models & communications
IEC 62351 Power System Control and Associated Communications – Data and Communication Security
IEC 62353 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
IEC/TR 62357 Power system control and associated communications - Reference architecture for object models, services and protocols
IEC 62365 Digital audio – Digital input-output interfacing – Transmission of digital audio over asynchronous transfer mode (ATM) networks
IEC 62366 Medical devices – Application of usability engineering to medical devices
IEC 62379 Common control interface for networked digital audio and video products
IEC 62388 Maritime Navigation and Radio Communications, Shipborne Radar
IEC 62395 Electrical resistance trace heating systems for industrial and commercial applications
IEC 62443 Industrial communication networks – Network and system security (DRAFT)
IEC 62455 Internet protocol (IP) and transport stream (TS) based service access
IEC 62464 Magnetic resonance equipment for medical imaging
IEC 62471 Photobiological safety of lamps and lamp systems
IEC 62474 Material declaration for products of and for the electrotechnical industry
IEC 62481 Digital Living Network Alliance (DLNA) home networked device interoperability guidelines
IEC 62502 Analysis techniques for dependability – Event tree analysis (ETA)
IEC 62531 Property Specification Language (PSL)
IEC 62680 Universal Serial Bus (USB) interfaces for data and power
IEC 62693 Industrial electroheating installations – Test methods for infrared electroheating installations
IEC 62700 DC Power supply for notebook computer
IEC/TS 62796 Energy efficiency in electroheating installations
IEC 62798 Industrial electroheating equipment – Test methods for infrared emitters
IEC 80001 Application of risk management for IT-networks incorporating medical devices
IEC 80001-1 - Part 1: Roles, responsibilities and activities
IEC/TR 80001-2-1 - Part 2-1: Step by Step Risk Management of Medical IT-Networks; Practical Applications and Examples
IEC/TR 80001-2-2 - Part 2-2: Guidance for the communication of medical device security needs, risks and controls
IEC/TR 80001-2-3 - Part 2-3: Roles, Guidance on distributed alarm systems
IEC/TR 80001-2-4 - Part 2-4: General implementation guidance for Healthcare Delivery Organizations
IEC/WD 80001-2-5 - Part 2-5: Application guidance -- Guidance for distributed alarm systems
IEC/DTR 80001-2-6 - Part 2-6: Application guidance -- Guidance for responsibility agreements
IEC/NP 80001-2-7 - Part 2-7: Application guidance -- Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1