iPad screen repair

Tools required your repair needs

Hair dryer or heat guniPad opening tooliPad replacement adhesive kitDouble zero Phillips screwdriverMetal spudgers 4-6 pry tools

Power off your iPad

Before performing any kind of repair on any device you should always power it off first.

Remove the cracked display

• Use your heat gun to heat up lower end of the phone.• Take the opening tool and very carefully insert it in

between the digitizer and plastic frame right below where the digitizer cable should be.

• Make sure that each area is heated properly so that you can take out the cracked pieces of glass

Attach the new digitizer assembly

• Carefully insert the two ends of the digitizer cable into the socket you removed the old one from.

• Make sure the digitizer cable is pushed in to or a little past the white lines or the touch screen may not fully respond.

• Once it is done snap back down the clips that hold it in place.

….. And DONE!