Download - iProject Interactive w/ Whiteboard
iProject Interactive w/ Whiteboard
iProject Interactive Session 1
Aqeel Williams, Instructor
Get Going with iProject Interactive
Framing Our Work
Today we will learn how to set up our projectors and interactive whiteboards by looking at their connections and the ports they are associated with
(For OOTB)
(We will label the different parts of the projector and interactive whiteboards and attach them to our mobile device. )
Teaching
Power Cable
•This provides power for our projector.
•This is a cable that will be used every time you use your projector.
•Can be plugged into the surge protector, our carts have internal surge protectors; however, generally in large spaces these surge protectors need to be attached to an extension cord.
RGB Cable•Sometimes referred to as a VGA cable.
•It has two large blue ports on either end.
•This is another cable that will be used all the time.
•Connects from the mobile device to the projector.
•Enables the projector to project the image on your computer.
•If you have no image being projected this is the first cable to check.
Teaching
USB Cable
•This cable connects your mobile device to the Interactive whiteboard.
•Your whiteboard is a USB device.
•It gets its power from your computer.
•Using this device will drain your battery. It is important to have your mobile device plugged in when running a whiteboard from it.
Teaching
Guided Practice
Examine the projector
Examine the cart
Connect the ports for the four cables> Power to Projector> RGB (VGA)> USB to Mobile Device> Power to Speakers
Getting Started
Connect all four cables> Power to Projector> RGB (VGA)> USB to Mobile Device> Power to Speakers
Adjust the height
Adjust the distance and mark on floor
Work Time
Participants will take turns in small groups connecting the three devices
> Projector> Interactive Whiteboard> Mobile Device
Power on
Power off