Download - Issue 232 Timber & Forestry E News

Advertising: Tel +61 7 3266 1429 Email: [email protected] 1issuE 232 | 30.07.12 | PAgE

Advertising: Tel +61 7 3266 1429 Email: [email protected]

6790

issuE 232 | 30.07.12 | PAgE 1

MBA pushesbest practice

Cont Page 3

Kiwi protected in the pines

• Deadline too short for biosecurity review

• US-Canada group checks out Aussie market

• Wood to energy a no-brainer

• Last of the red gum sawmillers

• Forest ‘peace’ talks extended

• Less domestic wood used in new houses

This issuE

Governments must lead by exampleTHE building and construction industry has called for governments to examine their contracting practices and introduce a best practice model code.This initiative will extend to the importation of what the Master Builders Association describes as “dodgy” building materials that fail to meet Australian standards.In a submission outlining priorities for reform of contract law lodged this month with the Attorney General’s department, Master Builders has urged the government to lead by example in the reform of on-ground practices.Chief executive Wilhelm

Harnisch said this was an opportunity for the government to show leadership and set a best practice benchmark for contracting, and then of course, abide by this best practice.“The Attorney General administers a model litigation program that any department wanting to engage in litigation must follow. This model should be recreated for contracting,” Mr Harnisch said.In relation to imports, Mr Harnisch said MBA was working with other associations, attorneys-general and Standards Australia on imports that were not fit for purpose or failed regulations

Better building .. recommendations to improve contract law practices.

mailto:[email protected]


www.timtech.info

www.osmose.com.au/Seminar2012.html

Advertising: Tel +61 7 3266 1429 Email: [email protected] PAgE | issuE 232 | 30.07.122

ForestWorks performsa range of industry

wide functions acting as the channel

between industry, Government and the Australian Vocational

Education and Training (VET) system

VICTORIAPO Box 612, North Melbourne 3051Tel: (03) 9321 3500Email: [email protected]

NEW SOUTH WALESPO Box 486, Parramatta 2124Tel: (02) 8898 6990Email: [email protected]

TASMANIAPO Box 2146, Launceston 7250Tel: (03) 6331 6077Email: [email protected]

BRISBANEPO Box 2014 Fortitude Valley 4006Tel: (07) 3358 5169Email: [email protected]

SOUTH AUSTRALIAUnit 2/191 Melbourne Street, North Adelaide 5006Tel: (08) 8219 9028Email: [email protected]

LearningSkills

ResearchAdvice

Innovation

INDUSTRY NEWS

industry concern oncontent of domesticwood in new houses

Cont Page 11

Case wins ear of government

‘It is indeed a very perverse

outcome that the tax designed to

reduce emissions is certain to drive business offshore to countries with

less environmental regulations and

much higher emissions intensities’

– Simon Dorries

Simon Dorries John McVeigh

THE engineered wood industry has registered grave concerns over the rapidly declining proportion of Australian-made components used in residential and commercial construction.Recent surveys suggest the ‘home-grown’ component of manufactured building products in new houses has fallen to as little as 30%, with the remaining 70% derived mostly from factories in Asia where workers are earning less than 30c an hour.Also, Australian houses are being built with combinations of timbers sourced in Russia, Chile, China, USA and the

Czech Republic and the local market is threatened by increasing supplies of factory-built kit homes from Japan.These concerns were put to Queensland’s Forestry Minister John McVeigh last week by an industry delegation led by Simon Dorries, general manager of the Engineered Wood Products Association of Australasia.“We were pleased with the Mr McVeigh’s level of interest in our concerns and his recommendation that further submissions be made to the Minister for Housing and Public Works [Dr Bruce Flegg],” Mr Dorries said.The industry also seeks the assistance from the ministers to ensure local manufacturers are not disadvantaged in state purchasing policies.“The fact remains that Australian manufacturers are at a significant price disadvantage to overseas competitors at a range of levels such as labour costs, transport costs, exchange rates and are subject to a number of unfavourable taxes such as payroll tax,” Mr Dorries said.“Most recently, domestic manufacturers have the added burden of the carbon tax which







www.vafi.org.au

mailto: [email protected]


with regards to safety.“We are very conscious of this problem,” he said.“In a contractual sense, the contractor is held liable so we are concerned about the supply chain liability where everyone potentially can be caught out or potentially dodge the issue.“There has to be quality control throughout the whole system. If a country like China gets an approval on a building product and then fails to maintain quality assurance, then authorities must act on this.”Mr Harnisch said it was not unusual for federal and state governments and their agencies to engage unfair contract practices in their dealings with the construction industry.“It is common for governments to include ‘termination for convenience’ clauses in contracts. This allows the government department or agency to end the contract at will, at a time of their choosing and without reason.“Other clauses permit governments to change the scope of a project at any time. So if a contractor has tendered on a $10 million project, the government could change it to a $15 million project and expect the tenderer to stick to its price and margins for a smaller project. The clause also allows government to reduce the size and scope of a project at any time.“These practices would not be permitted in the private sector. The government should set a positive example and play by

the same set of rules it creates for other parts of the economy,” Mr Harnisch said.Master Builders’ submission to the Attorney Generals department on improving Australia’s law and justice framework makes 10 recommendations to improve contract law practices.In the submission Master Builders says there are too many inconsistent statutory constructs in place which attenuate the notion of fairness and which create a difficult web of contract law in which builders become entangled.These statutory provisions have arisen largely as a result of the common law courts rejecting substantive unfairness as a ground of intervention

in otherwise validly formed contracts, a position Master Builders supports.It is the various and contradictory ways that the notion of ‘fairness’ has been introduced as an overlay on the common law which has

raised on-ground difficulties. Master Builders submits that the area requiring reform is harmonisation of federal, state and territory laws that underpin contracts or which regulate contractual disputes.Master Builders represents 33,000 businesses nationwide, including the top 100 construction companies. It is the only industry association that represents all three sectors – residential, commercial and engineering construction.MBA estimates that the cumulative construction task over the next decade will require work done to the value of $2.4 trillion. The residential and non-residential building sectors combined will require $1.25 trillion worth of work and the engineering construction sector $1.15 trillion worth.The construction industry represents more than 9% of the total Australian workforce with the number of jobs expected to increase by 300,000 to around 1.3 million employees by 2021.According to the ABS, the value of work done by the building and construction industry was $172.9 billion in the year to September 2011, excluding around $30 billion of smaller renovations work. Residential building work amounted to $46.7 billion, non-residential building $32.5 billion and engineering construction $93.7 billion.At November 2011 the construction industry employed 1,039,900 people.

statutory constructs entanglingbuilders in web of contract law

From Page 1

INDUSTRY NEWS

‘The government should set a positive example and play by same set of rules it creates for other parts of the

economy’ – Wilhelm Harnisch

Valuable asset .. construction industry represents more than 9% of the total Australian workforce.

Wilhelm Harnisch .. concerns about supply chain liability.

Resignation: Gunns board shrinks to just four membersTHE board of Gunnd Ltd has shrunk to four members following the resignation of one of its directors.

Gunns has told the stock exchange Paul Teisseire has left the board, but will continue as chairman of its subsidiary

Gunns Plantations Limited. Mr Teisseire joined the board in 2008.Gunns’ shares have been in

a trading halt for more than four months as the company negotiates a $400 million capital raising.



SIGNATORIES to the Tasmanian forest agreement have been given an extra two weeks to do more modelling on the impacts of a peace deal on industry and its effects on communities by the creation of new high conservation value forest reserves.The Federal Environment Minister Tony Burke has backed the decision to grant another extension. The deal is expected to cost more than first thought.The Forest Industries Association’s Terry Edwards says more money will be needed to implement any decision to reduce the amount of native forest logging.“[They’re] not all big ticket items in terms of cost but nevertheless all issues are important to ensure that any agreement can be implemented properly.Premier Lara Giddings says a

deal must be struck first; there has been no final agreement reached on protected forests – an answer to The Australian newspaper report that 525,000 ha of forest will be protected from logging.“We have to be patient and wait for that to enable appropriate modelling and appropriate analysis to occur that will help to inform that final decision,” she said.“Until we actually see a final agreement, it doesn’t matter what speculation there is around numbers.Signatories have indicated any agreement will require extra implementation money, on top of the $276 million already set aside. But they have refused to say how much would be involved.A meeting last week between the state and federal governments failed

to produce any more funding commitments. It is understood the state government is yet to put a funding request to Canberra.Both sides of the peace talks have admitted there has been no focus on Gunns’ proposed Tamar Valley pulp mill, despite the project being one of the key terms of reference that initially

sparked the peace process.Signatories have revealed there has been little discussion about a plantation-based mill.Terry Edwards says a pulp mill remains an important infrastructure project for the sector. But he told ABC Radio it has funding challenges that are not for signatories to the peace process to debate.The Wilderness Society has conceded there will need to be a native timber log supply for veneer company Ta Ann.The company has been the focus of ongoing environmental campaigns in Asian markets which lost it two contracts and forced it to shed 50 staff.While not going into the specifics of the deal, the society’s Vica Bayley has told ABC Radio it was critical there was a wood supply for Ta Ann

INDUSTRY NEWS

Forest ‘peace’ talks extended

Terry Edwards .. pulp mill remains important infrastructure project for the sector.

Cont Page 10


www.fwpa.com.au


EVENTs

WHAT’S ON?Australia’s forest, wood, pulp and paper products industry now has a stronger voice in dealings with government, the community and in key negotiations on the industry’s future, as two peak associations have merged to form a single national association.

The Australian Forest Products Association (AFPA) has been formed through the merger of the Australian Plantations Products and Paper Industry Council (A3P) and the National Association of Forest Industries (NAFI).

AFPA was established to cover all aspects of Australia’s forest industry:

- Forest growing; - Harvest and haulage; - Sawmilling and other

wood processing; - Pulp and paper processing; and

- Forest product exporting.

For more information on the Australian Forest Products Association (AFPA) or to enquire about membership , please call (02) 6285 3833.

JULY23-25: Australian Timber Trainers Association annual workshop. Albany, WA. Visit www.atta.org.au 31: Australian Timber importers Federation board meeting.Morning meeting in Qantas meeting rooms, Adelaide Airport, followed by lunch and the 2012 AGM. South Australian ATIF members and guests have been invited to lunch with the board before the AGM. Lou Boffo of Le Messurier Timber is the local coordinator for inquiries on (08) 8447 0400). AGM inquiries to John Halkett (02) 9356 AUGUST-NOVEMBERFWPA R&DWorks seminar series: Churchill, Vic, August 8; Melbourne August 9; Coffs Harbour, NSW, September 4; Maryborough, Qld, September 6; Brisbane September 7; Albury, NSW, October 4; Oberon, NSW, October 31; Sydney November 1; Hobart November 29.AugusT13-15: Australian Window Association’s annual conference and exhibition. Fenestration Australia 2012 at The Esplanade Hotel, Largest gathering of local and international organisations associated with the window industry, bringing together more than 300 delegates from right across the value chain. Inquiries to conference secretariat on (08) 9381 9281 or email [email protected]

22-23: Carbon Forestry2012. Auckland NZ. Forestry is New Zealand’s largest potential carbon sink and, as the ETS continues to grow in importance to NZ businesses,so does its investmentfuture. A raft of new legislation,a dramatic drop-off in carbon trading and pricing during 2011, thsome international emissions units and uncertainty around the future alignment of New Zealand and Australia’s trading schemes has changed the landscape significantly. It’s led to uncertainty in the marketplace about the immediate future and opportunities that exist in carbon forestry.Visit www.carbonforestryevents. comOCTOBER3-4: Joint ISCs and Skills Australia conference: The Future of Work In 2011, Australia’s 11 industry skills councils and Skills Australia held their inaugural joint conference. Join MC Kerry O’Brien, Q&A panel moderator Tony Jones and a range of industry identities to explore the future of work, and its implications for building Australia’s human capital. Sydney Convention and Exhibition Centre, Darling Drive, Darling Harbour, NSW.14-17: Australian Forest Growers conference. Gympie Civic Centre, Gympie, Qld. More than 50 speakers will present at 20 sessions. Three concurrent streams will feature growing, products and markets and integration. The middle day will

feature six field trips heading in all directions from Gympie to examine local growing and processing in action. This will be followed by the presentation of the national Tree Farmer of the Year Award at the conference dinner. Visit www.afg.asn.au for further information or contact Terry Greaves on (02) 6162 9000 or email [email protected]: Industry Development Conference hosted by ForestWorks in Canbrerra.Following overwhelmingly positive feedback regarding the opportunities for high-level political engagement afforded by holding the dinner at Parliament House, ForestWorks has moved quickly to secure one of the few remaining available dates during sitting weeks. Speakers, topics and themes will be available soon.10-11 (Rotorua) and 16-17 (Melbourne). Improving international cost competitiveness through smart science, research and technology. New Zealand and Australian forest products companies face increasing competition from low cost producers, and from lower cost, better performing non-wood products. Low costs and high fibre recovery,achieved through process innovation, are prerequisites to competing in today’s global forest product markets. This Australasiantechnology event will provide local forest products, wood processing and manufacturing companies with a unique opportunity. Visit www.woodinnovationsevents.com

http://www.atta.org.au

http://www.carbonforestryevents

http://www.afg.asn.au


http://www.woodinnovationsevents.com


www.holtec.org



EVENTs

AFG in Gympie: you might notsee the foresters for the treesFrom ANDREW SINCLAIR

on the Sunshine CoastTHE region has scored a major boost this year with the biannual Australian Forest Growers conference to be held in southeast Queensland over four days from October 14 to 17 in Gympie.Up to 350 foresters are expected to attend the event at the Gympie Civic Centre, which will feature two packed days of presentations, a day of field trips and great social functions and networking opportunities.The conference kicks off with an icebreaker at the well-known Gympie Woodworks Museum where the steam-powered sawmill will be in operation demonstrating the region’s historic links to forestry.Over two days more than 50 speakers will present at 20 sessions. These include

representatives from our own University of the Sunshine Coast’s Cooperative Research Centre for Forestry.Three concurrent streams will feature growing, products and markets and integration.The middle day will feature six field trips heading in all directions from Gympie to examine local growing and processing in action. This will

be followed by the presentation of the national Treefarmer of the Year Award at the conference dinner.Keynote speakers this year are Peter de Marsh and Ric Sinclair.Peter from his native Canada is the president of the International Family Forestry Alliance – a group representing more than 25 million family forest owners worldwide. Ric is

the managing director of Forest and Wood Products Australia, the industry-owned services company researching and promoting the sector.The conference is being organised by a committee whose members include local growers, academics, wood processors, departmental officers and industry groups based across the Wide Bay and Sunshine Coast regions.AFG is the peak body representing people concerned with the growing of trees for all purposes in Australia. Members include farm foresters and woodlot owners up to large commercial growers.Visit www.afg.asn.au foR further information or contact Terry Greaves on (02) 6162 9000 or email [email protected]

Peter de Marsh Ric Sinclair

‘Woodchip facility sale generates certainty for Green Triangle’A TIMBER industry analyst expects new Asian investments will generate certainty in the Green Triangle.The Tasmanian timber company Gunns has sold its Portland woodchip export facility in

Victoria to Australian Bluegum Plantations (ABP) for about $62 million.The director of Industry Edge Robert Eastment says ABP is a large player and will spark 20 years of timber exports for the

region of southeast Victoria and southeast South Australia.He says new paper manufacturers in China have boosted positivity in the industry.“There’s some new investments

in China; they’re building new pulp mills and paper machines over there but the problem is while there is competition in the market, of course prices are not as high as the growers would like them to be,” Mr Eastment said.

http://www.afg.asn.au



http://www.cailbre-equipment.com

http://www.calibre-equipment.com


Already the trust is helping Ernslaw

to locate and protect birds that

are nesting in areas scheduled

for harvest

NEW ZEALAND

www.tanalised.com

Kiwi protected in the pines

Cont Page 12

A MAJOR forest owner has started a partnership with a conservation group, the Project Kiwi Trust, to monitor and protect Coromandel brown kiwi living in a large radiata pine plantation near Whitianga.Many native species – including birds, bats, reptiles and insects – live in planted exotic forests. Forest owners certified by the Forest Stewardship Council actively protect these species by controlling possums, stoats and other predators.“When we became aware that kiwi were living and migrating through our plantation, we were faced with the responsibility of looking after them while operating a working forest,” says Steve Couper of Ernslaw One, the owner of Whangapoua Forest. In 2007, with advice from environmental consultant Dr John McLennan, Ernslaw created a safe haven within the forest for kiwi and other native species where predators would be intensively controlled. For the last five years, this control work has been carried out by a local contractor. “But while we know we have been successfully controlling predators, we still know very little about the kiwi themselves. Is their population growing? How, if at all, are they affected by forest operations?” Mr Couper asks.“Hence the decision to put kiwi monitoring into the hands of the Project Kiwi Trust and to appoint the trust’s contractors to carry out the predator control

work after a well-subscribed tender process.”The trust was the country’s first community-led kiwi conservation project. Established on the Kuaotunu Peninsula, near Whangapoua, the trust pioneered predator control strategies, captive-rearing strategies including Operation Nest Egg, kiwi tracking and predator-proof fencing. Its experience is now being applied by numerous community wildlife protection

Forest owner partner in conservation project

Kiwi .. protected species in plantation forests.


www.tanalised.com


ARBUTHNOT Sawmills, the last remaining mill using red gum high quality sawlogs harvested from state forests along the Murray River, celebrated its 123rd birthday this year.Managing director of the mill Paul Madden said Arbuthnot had been processing timber since the time paddle steamers ruled the Murray River and was part of rural Australia’s rich history.“From supplying wood for the boats that once made the Murray the river highway of Australia, to the high quality red gum for furniture and homes, the timber that came from Arbuthnot helped build many of the towns along the Riverina,” he said.“We have a proud history of local manufacturing and 123 years later we are still processing quality red gum timber for heritage projects in our towns, including the upgrade of the Echuca wharf, to keep the history alive for another generation.”Mr Madden said locking up 90% of red gum state forests in Victoria and New South Wales in national parks made it difficult for the business, which is now the last of the Riverina sawmills working with high quality red gum sawlogs from public land.However, as one of the largest employers in or around Koondrook, with 25 full-time staff, Mr Madden is convinced the mill will continue the proud tradition of sawmilling in the region.“As its 123-year history shows, this business is a survivor,” he said.“With supportive state governments and increasing demand for low-carbon

renewable building products like timber, we believe that not only do we have a rich history to look back on, but a long-term and sustainable future to look forward to.”The 123rd anniversary was celebrated on July 23 and was attended by a number of guests, including state member for Rodney Paul Weller and

Gannawarra Shire mayor Max Fehring.The celebration included a mill tour and an exhibition of the mills latest investments in new laminating and finger jointing plants.Chief executive of the Victorian Association of Forest Industries Lisa Marty said Arbuthnot’s

longevity highlighted the socio-economic importance of businesses in the forest and wood products industry to a number of communities across Victoria.“Arbuthnot played a major role building the communities along the Murray River,” Ms Marty said.“For 123 years they have provided employment in Koondrook and surrounding communities, and produced sought-after red gum timber products for furniture and flooring, heritage building projects, such as the Port of Echuca, and structural building products and firewood.Ms Marty said businesses like Arbuthnot were not only part of the history of their communities, but also an important part of their future.“Arbuthnot is an example of a local business that has continued to invest and upgrade its equipment and its products,” she said.“They are also an important part of the Victorian forest and wood products industry, which directly employs around 24,000 people and indirectly supports up to 50,000 more jobs.“Secure future availability of timber is crucial to underpin the success of Arbuthnot and other forest and wood products businesses into the future.“The Victorian government’s timber industry action plan provides for this security, encouraging future investment and competitiveness in the industry and helps provide a sustainable future for the industry and ongoing benefits for the local communities it supports.”

CELEBRATION

Last of the red gum sawmillers celebrates 123 years of history

Processing timber since time of the paddle steamers

Paul Madden .. Arbuthnot helped build many of the towns along the Riverina.

‘Locking up 90% of red gum state for-ests in Victoria and New South Wales in national parks has made it difficult

for the business, which is now the last of the Riverina sawmills working with

high quality red gum sawlogs from public land’ – Paul Madden



AN August 10 deadline for feedback on new biosecurity legislation has riled some sectors of industry.Chapters of draft legislation that will form the new biosecurity Act have been progressively released for public comment since July 4.Coalition forestry spokesman Senator Richard Colbeck says this is a bungle of another important consultation period by the federal government.“The main grievance is that this is a very short amount of time to consider legislation of such magnitude,” Senator Colbeck said.The forest and wood products industry has a strong interest in biosecurity and the new Bill in regard to potential incursions of damaging pests and diseases on both forestry and wood product supply chains, managing damaging pests and diseases when / if established, and implications to international and interstate trade of forest and wood products.“So far nine of 12 chapters have been released, which is 333 pages of reading alone. Then there is a regulatory impact statement to consider and also another related piece of draft legislation, the Inspector-General of Biosecurity Bill.

“And industry is still waiting to see chapters 2, 6 and 8 which deal with human health, prevention and control, and emergency provisions, so they will not have the full 28 days to consider those elements.“It looks like the federal agriculture minister [Joe Ludwig] is set to again alienate Australian industries with a farcical consultation period.“It is clear Minister Ludwig just isn’t listening – he is ignoring industry and he is ignoring his parliamentary colleagues.”Mr Colbeck said that given the bungling of export certification reforms, the Coalition had made it clear that the new biosecurity Act would go to a senate inquiry.“For the minister to come out and state that he wants the final bills debated in parliament in the spring sitting is incredibly naive or incredibly arrogant – or both,” Mr Colbeck said.“The development of this draft legislation has taken almost three years and while there has been some industry input, it has been relatively restricted and participants have been bound by strict confidentiality agreements preventing them from discussing the mooted changes with the broader wider industry.”

‘Labor has an appalling record when it comes to

engaging in genuine

consultation with industry and it looks like the

biosecurity Act is going to be its latest failure’ –

Richard Colbeck

INDUSTRY NEWS

Timber & Forestry e-news is the most authoritative and quickest deliverer of news and special features to the forest and forest products industries in Australia, New Zealand and the Asia-Pacific region. Weekly distribution is over 6700 copies, delivered every Monday. Advertising rates are the most competitive of any industry magazine in the region. Timber&Forestry e-news hits your target market – every week, every Monday!

HEAD OFFICECustom Publishing Group

Unit 2- 3986 Pacific HighwayLoganholme 4129 Qld, Australia

PUBLISHERDennis Macready

[email protected]

CONSULTING EDITORJim Bowden

Tel: +61 7 3266 1429Mob: 0401 312 087

[email protected]

ADVERTISINGTel: +61 7 3266 1429

[email protected]

PRODUCTION MANAGERKerri Michael

[email protected]

Opinions expressed on Timber & Forestry e news are not necessarily the opinions of the editor, publisher or staff. We do not accept responsibility for any damage resulting from inaccuracies in editorial or advertising. The Publisher is therefore indemnified against all actions, suits, claims or damages resulting from content on this e news. Content cannot be reproduced without the prior consent of the Publisher- Custom Publishing Group.

Deadline too shortfor industry reviewof biosecurity laws

Richard Colbeck .. bungle of another important consultation period.







By WENDELL MACLOUDA US-Canada delegation representing a range of sawmills and timber industry associations from the Pacific Northwest of USA and Canada spent a busy week visiting Australian importers and wholesalers in July.The group visited Australia to observe changes in the market, learn about trading opportunities, meet Australian importers and wholesale distributors, discuss the present and developing market conditions and keep up with any changes in regulations.The tour encompassed calling on the importer wholesalers of Victoria, Queensland and New South Wales over a period of five days.

On the first evening of the visit, following a meeting of the Victorian Timber Importers Association, the delegation met timber importers at the Imperial Hotel in Melbourne. There Frank Stewart of the Western Wood Products Association, headquartered in Portland,

Oregon, gave a presentation on the current state of the US timber industry, the North American building market and the future outlook for the industry. Overall he suggested that the outlook was now “somewhat optimistic”.The delegation expressed its thanks to the Victorian function organising committee, including Michael Moorhead, Robert Cairns and Ingrida

Matulis for their help and efforts in putting together the reception function.During the week, the delegation was impressed with much of the current technology utilised by Australian suppliers and the quality of output of manufactured products. Overall, the North Americans were most impressed with the openness, friendliness and hospitality of the Australian timber industry people they met.

TRADE VISIT

US-Canada group checks outAustralian market conditions

US-Canada delegation meets Aussies in Sydney ..Tom Rogers, Patrick Lumber Company, Wendell MacLoud, Thorlynne Pty Ltd, Vicki Onuliak, Bridgeport Forest Products, Mike Parr, Dongwha, Frank Stewart, Western Wood Products Association, Natalie Macias, Softwood Export Council, Dale Bartsch, Hymark Wood Manufacturing, Mike Beye, Vaagen Bros, Trent Gustafson, Trans-Pacific Trading, and John Halkett, Australian Timber Importers Federation.

You can expect superior outcomes from Austbrokers Premier in the following key areas:• Focus on premium value and insurer security• Expert advice for Business Interruption• Premiums + claims + deductibles – self insurance option analysis• Committed claims management & settlement negotiations.• On-going service and advice, not just at renewal time.

Call Alan Jones 0419 754 681 or Scott Hastings 0406 382 582 today.

Freecall 1800 803 180ABN 95 010 576 324 AFSL 238123

Insuring it all stacks up.

Selecting the right equipment to maximise your production output is similar to selecting the right people to maximise your insurance protection.

Austbrokers Premier has been working with the timber industry for over 25 years and we know what insurance best suits your industry and risks. Whether it’s a complicated business interruption loss or a burnt out frontend loader we work hard to get you the right outcome.

InSurAnce..It’S All In the SelectIon Ta Ann supply critical

From Page 4to meet its contracts.“Ta Ann being part of the future industry for Tasmania is something that everybody has accepted,” he said.“We’re not going to the specifics of what is being modelled here, but it’s important that this information is modelled and that these negotiations are given the clear space and the

clean air to finalise.”Meanwhile, the Tasmanian Aboriginal Centre wants Aborigines to become the enforcers of any forestry peace deal. The centre’s legal director Michael Mansel, says a two-week extension to the forestry peace talks will enable him to talk with state and federal governments about allowing Aboriginal people to take over forest management.

hQPlantations not involvedA comment attributed to Brian Farmer of HQPlantations (T&F enews 23/7/12) suggesting HQP is having discussions with state’s forest policy group in terms of developing access to native forest reserves has been misconstrued.Mr Farmer says HQPlantations’

view about the opportunity to re-enter or continue the access to state forests is unimportant. “I neither support nor discourage the option. I don’t believe HQPlantations should enter the debate at all as it has no relationship to our business,” Mr Farmer said.



our competitors are simply not subjected to.“The impact of the carbon tax and other factors has seen domestic manufacturers placed at further disadvantage.”Mr Dorries said in the case of engineered wood products, the carbon tax had added about1%- 3% to manufacturing costs.“In the current competitive market, business is frequently lost to our overseas competitors on a price difference of less

than 1%,” he said.“It is indeed a very perverse outcome that the tax designed to reduce emissions is certain to drive business offshore to countries with less environmental regulations and much higher emissions intensities.”A request to John McVeigh that the EWPAA be included

in consultations on the Queensland Timber Industry Plan was well received by the minister.Mr McVeigh has agreed on a plan to revive the lagging fortunes of the state’s timber industry.He says the new LNP government is committed to a vibrant forest industry and that

its approach will be different to the previous Labor government.His department and Queensland industry are jointly developing an industry plan to provide a road map for the future.Mr McVeigh says the plan will be a commonsense process looking at what access is required by hardwood millers to both state forests and plantations.The industry is pleased the new government will stand up for the 20,000 local jobs Queensland’stimber industry underpins.“We welcome Minister McVeigh’s fresh approach and look forward to working closely to develop a plan that will revive and grow our Industry,” the chief executive of Timber Queensland Rod McInnes said.

The government has agreed on a plan to revive the lagging fortunes

of the state’s timber industry

From Page 2

government committed to a vibrantQueensland forest industry: McVeigh

INDUSTRY NEWS

OURWORDIS OURBONDLook for the stamp of exceLLence

Don’t give traders who cutcorners a licence to sellwood that threatens the livesand livelihood of our workers.Face the facts

FACT: All EWPAA structural plywood and Type A bond exterior plywood have an emission class of E0 or E1 certified under a JAS-ANZ accredited system.FACT: All EWPAA products have a durability guarantee and all EWPAA members carry liabilityinsurance.FACT: All EWPAA products can gain extra Green Star rating points – one for low formaldehyde emissions (E0 or E1) and one for super E0 in office fit out.FACT: Not all imported non-certified LVL and plywood

meet these requirements. In fact, laboratory tests show manyimported non-certified products are continuously failing Australian standards for emissions and bonding strength and are life threatening.FACT: Manufacturers, agents and suppliers trading in inferior quality, unlabelled and non-compliant plywood and LVL risk damage to their business, media exposure and high penalties under Australian law.

Engineered Wood ProductsAssociation of AustralasiaPlywood House, 3 Dunlop Street, 4006 Queensland AustraliaTel: 61 7 3250 3700 Fax: 61 7 3252 4769. Email: inbox@ewp,asn,auWeb: www.ewp.asn.au

Don’t risk it.Specify EWPAA products stampedwith the approved certification.

Standing up for the 20,000 local jobs Queensland’s timber industry.

http://www.ewp.asn.au



initiatives around the country.Project Kiwi Trust chairman Fraser Lampen says the trust is thrilled to be appointed as the manager of the biodiversity enhancement program in the Whangapoua forest. “This new relationship with Ernslaw One helps ensure the long-term financial sustainability of our work, allowing us to achieve our primary goal of protecting and enhancing the Coromandel kiwi population,” Mr Lampen said.The new pest control contractors are Jono and Paula Williams who will work with Project Kiwi to manage the area. Dr John McLennan, the original designer of the pest and predator control program, is a trustee of Project Kiwi. His expertise and that of other trust professionals will be used to build understanding of the behaviour of kiwi within the forest. This information will help Ernslaw One and the trust to mitigate negative effects, if any, forest operations have on kiwi that inhabit the forest. Already the trust is helping Ernslaw to locate and protect birds that are nesting in areas scheduled for harvest. “The trust recently carried out

a kiwi call count survey in the predator control area. This provides a baseline to measure the success of Ernslaw One’s investment in pest and predator control in enhancing kiwi abundance over time,” Mr Couper says.Whangapoua Forest covers 10,500 ha and includes 175 km of riparian (streamside) strips of native bush and more than 2000 ha in wildlife refuges and corridors. About 7500 ha is in radiata pine production forest that is in a constant 30-year cycle of planting, growth and harvest. Plantation forests can provide valuable habitat for some threatened and endangered species and contribute to the conservation of biodiversity in a landscape that is dominated by pastoral agriculture.As well as providing habitat in their own right, plantations play particularly important roles in buffering native forest remnants and in enhancing connectivity between areas of native ecosystems, including patches of primary forests, riparian strips, and amenity plantingsThe 1430-ha area safe haven within Ernslaw One’s Whangapoua Forest includes mature pines that are progressively harvested.

NEW ZEALAND

Getting into the action ..Brisbane Timber Industry Hoo-Hoo Club 218’s ’77 Holden Kingswood is ready for the 2012 Queensland Variety Club Bush Bash from Dalby one the Darling Downs to Mackay in North Queensland.

The Governor of Queensland Penelope Wensley ‘fl ags’ the start of Brisbane Timber Industry Hoo-Hoo Club’s Variety Bush Bash project for children’s charities during World Forestry Day celebrations in Brisbane. Looking on are committee members Alan Jones (club president), Don Towerton and Tim Evans.

Brisbane Timber IndustryHoo-Hoo Club 218 has entered the 2012 Variety Club of Queensland Bush Bash to raise funds for disadvantaged children and has purchased a veteran Bush Bash performer– a 1977 Holden Kingswood.The Variety Bush Bash in the club’s major children’s charity event this year.Please support it and show how the forest and forest products industry can enrich the lives of underprivileged children.Your sponsorship will attract wide media coverage and is tax deductible.

We sincerely thanks the following sponsors:Silver sponsorsKennedys Timbers, Queensland Sawmills(John Crooke)

Bronze sponsorsAlan Jones, Trade Builders,Thora Wholesale Timbers,HQPlantations

Contributing sponsorsBill Philip; CGU Insurance, Brisbane; Colin Wilson; Bank of Queensland, Ashgrove and Sunnybank; Austbrokers Premier Insurance, Brisbane; Brisbane Hoo-Hoo Timber Industry Club 218 Inc; Tim Evans (Coast to Coast Pacifi c); Timber&Forestry enews; RACQ Caloundra; Contract Electrics Pty Ltd; Eden & Son Body Works; Advanced Timber Systems (Ian Watkins); Pacifi c Premium Funding Pty Ltd; Chancellors Chartered Accountants; Mark Kapper; Tableland Timbers; Skyline Building Supplies; Zenith Timber; Colin Galley; Steel Pacifi c; ITreat Timber; Frank Withey; Anderssen Lawyers; IVS Australia; Ringwood & Ply.

For more information and to discuss sponsorship options – and a chance to join the Bush Bash team on the road – contact one of the committee members:Alan Jones 0419 754 681 Don Towerton 0428 745 455Tim Evans 0417 726 741 Jim Bowden 0401 312 087

From Page 7

Plantations valuablehabitat for threatened,endangered species

The Waikato River – the longest in New Zealand running for 425 km through the North Island - passes through a plantation forest between Lakes Ōhakuri and Maraetai.



FRAME AUSTRALIA IN FOCUS

Putting delegates in the frame at Frame Australia

Nathan Benton, construction supervisor, CRS Ltd, Sydey, and Dr Alastair Woodard, executive director, Australian Life Cycle Assessment Society.

Shannon Mott, channel manager (west), LP Building Products, Venice, California, USA, and Australian agent Michael Thompson, chief executive, Woodtec Global, Kirkland, WA.

On the Homag stand .. Ryan Slater of Homag and Gary Raven, Gary Raven Frame and Truss, Hamilton, NZ.

Jack Haber, director, TecBuild, and Justin Iscaro, project engineer, Cardno, Melbourne.

Tim Facoory, sales manager, Versace Timbers, Brisbane, and Warwick Cashman, Queensland sales manager, Multinail.

Visiting the EWPAA stand at Frame Australa are Kris te Lintelo, Australand, Dr David Pollard, chief executive, Australian Forest Products Association, and Daniel Marsic, Australand.

MORE than 300 delegates from the building and wood products industries converged on Melbourne for the Frame Australia 2012 conference in June. Many visitors commented on the high level of speakers and the diversity of topics. The event this year for the first time looked beyond the standard development of frames and trusses and software packages and fixed on totally new methods of construction such as factory-built panels

and cross laminated timber for multi-storey buildings.The program contained many highlights including a presentation on the Lend Lease project Forte – a 10 storey CLT construction building in Melbourne’s Docklands that will be the world’s tallest timber apartment building.Speaker presentations are available at www.frameaustralia.com(A report on Frame Australia appeared in issue 227 of T&F enews on June 25).

The major national event for engineered timber and

building pre-fabrication

HURRY & save $100Early bird ends MONDAYwww.frameaustralia.com

Conference & Exhibition Melbourne 18-19 June

2012

The major national event


The major national event The major national event The major national event The major national event

http://www.frameaustralia.com





Damien Simpson AKD Softwoods, Mark Cooper, Bunnings, Melbourne, and Bruce Wallace, The Truss Joint, Bendigo, Vic .

Dr Alastair Woodard, executive director, Australian Life Cycle Assessment Society, Greg Jensen, commercial and regulatory manager, Lonza Wood Protection, and Robbie McGavin, Department of Employment, Economic Development and Innovation (DEEDI), Brisbane.


Welcoming delegates to the Platinum Global exhibit at Frame Austraia are Nhi Phan, executive assistant to the chairman, and Tham Nuguyen, both from Vietnam.

Colin MacKenzie, timber application and use manager, Timber Queensland, Brisbane, catches up with old friend Richard Hough, principal, Arup, Sydney, while Peter Robinson of Boral Timber joins them.

James Wang, managing director, Auswood, Auburn, NSW (left) on the Stora Enso Timber Australian stand with Matthew Wood, managing director, Helen Pham, supply chain manager, and Darrin Wheeler, national sales director.

Kersten Gentle, executive officer, Frame and Truss Manufacturers Association Australia, shares a coffee break with Paul Codes, owner / manager, Aston Newman Timbers, Mount Gambier, SA, and Bill





2012







On the Lonza Wood Protection stand .. Ron McMaster, Redland Bay Roof Trusses, Steve Koch, business development manager, Lonza, Narangba, Qld, and Troy Justice, business development, Lonza..

Rene deVries, PlaceMakers, New Zealand, Kurt Stancombe, Pryda, Melbourne, Frank Michelton, Wingfield Timber Supplies, Adelaide, and Chris Rogers, Estim8 Pty Ltd, Melbourne.

Leon Quinn, southern region sales manager, Tilling, Paul Micallef of Peuker & Alexander, Melbourne, and Dean Ashton from MiTek, Melbourne.

Mark Dindas, director, Panelbuild Pty Ltd, Brisbane, Kris te Lintelo, development director, Australand, John Cunnard, Panelbuild, Doug Bartlett, industry consultant, Brisbane, and Daniel Marsic, Australand.

Sean O’Malley, research and technical, manager Planet Ark, Philipp Zumbrunnen, project director, Eurban Ltd, London, Andrew Dunn, chief executive, Timber Development Association, Sydney, and Boris Iskra, national manager codes and standards, Forest and Wood Products Australia, Melbourne.

Tim Sherry, Carter Holt Harvey Woodproducts Australia, and Olle Berg, senior vice-president, marketing and sales overseas, Stora Enso Wood Products Europe.






2012






Advertising: Tel +61 7 3266 1429 Email: [email protected] PAgE | issuE 232 | 30.07.1216www.komatsuforest.com.au

NEW ADVANTAGES WITH KOMATSU

NEXTBIG STEP

IntroducingKomatsu

www.komatsuforest.com.au


NEXTBIG STEP

IntroducingKomatsu



NEXTBIG STEP

IntroducingKomatsu

Komatsu Forest Pty Ltd15C Hyland Cres

Rotorua, New ZealandDean O’Connor M: +64 277 718 254

E: [email protected] Kosar M: +64 274 865 844

E: [email protected]

Komatsu Forest Pty Ltd.11/4 Avenue of Americas

Newington NSW 2127 AustraliaT: +61 2 9647 3600

E: [email protected]

Komatsu 'FoREst XtREmE' FELLER BuNCHERs & HaRVEstERs

The Forest Xtreme machines illustrates Komatsu forest’s dedication to provide the best solution for the logging contractor.

Komatsu Forest offers the PC300LC-8 and PC400LC-8 as purpose built forest machines (FX) with specifications to match the toughest jobs.

Forest Xtreme features:

• ROPS/FOPS/OPS Cabin

• Full heavy duty Gull Wing canopy

• Heavy duty under body guarding

• Harvest or Feller Buncher boom sets

• Single or double bar track grousers

• Integrated 1200 litre fuel tank

• Engine option; 260hp or 362hp


http://www.komatsuforest.com.au







Steep climb .. the ClimbMAX harvester is undergoing trials in New Zealand.

With Wormald, you have an organisation that is always right behind you when you need us most. We’ve helped prevent and protect against fires for over 120 years.

Wormald has the fire protection solutions for heavy vehicles that range from fire detection and suppression systems, to portable fire equipment, personal protection gear and staff training; our end-to-end tailored solutions help protect major forestry operations throughout Australia and the Pacific region.

So, you can get on with the job, confident that your people, resources and machinery are supported by one of the world’s fire safety leaders. That’s peace of mind.

Trust the forestry fire safety experts.

In Australia:

Call 1300 556 015. email [email protected]

or visit wormald.com.au/vehicles

In New Zealand:

Call 0800 496 762, email wormaldnz.ads@tycoint.

com or visit wormald.co.nz/vehicles

Combining remote locations, harsh operating environments and heavy vehicles and equipment, the forestry and timber industries face significant fire risks.

We’re right behind you in the field

Pictured: Cylinders and Extinguishers

FORESTS AND FOREST MACHINERY

Making loggingon steep slopesa lot safer in NZTHE Forest Owners Association of New Zealand and the government’s Primary Growth Partnership are putting their resources together to the tune of $NZ6.5 million to investigate more productive and safer ways of harvesting steep slopes.The business plan for the project is being lead by the FOA, and will be managed by Future Forests Research. The government and forestry sector have set themselves the target of reducing harvesting costs by 25%, substantially growing the manufacturing of harvesting machinery, and making harvesting jobs safer and more attractive for workers.From the safety perspective, the vision is to have “no worker on the slope and no hand on the chainsaw”. The outcome would be to develop remote controlled machines for steep slopes and high speed cable extraction systems.The FOA has brought together research providers, the forestry companies and harvesting equipment manufacturers. The business plan aims to identify direct economic benefits of more than $100 million by

2016 and $400 million by 2020. These benefits will mostly be realised through better practices and local and global equipment sales.This joint funding has supported development of the Kelly Logging / Trinder Engineers steep slope harvester, the ClimbMAX.The beta prototype of ClimbMAX is now working on slopes in the Nelson area and productivity trials under way. A New Zealand North Island contractor has ordered the machine which, with enhancements to the winch hydraulic system, is expected to be Trinder’s commercial model.ClimbMAX is a big step towards fulfilling the aims of the FFR harvesting theme research over the past two years including safety (no hands on the chainsaw, no workers on the slopes) and productivity (bigger payloads, reduced cycle times and cost reduction).Harvesting and transport, especially on steep slopes, make up 40% to 60% of the delivered cost of logs.



www.wormald.com.au/vehicles


www.wormald.co.nz/vehicles


CAN someone help me out here? What really is the go with the greens in Australia opposing wood use and forestry? I really don’t get it.In Scandinavia, across Europe and elsewhere, the greens are increasingly becoming the most vigorous disciples for increased wood use for building construction and for renewable energy production. Why is it then that here the greens – aided and abetted by the federal government – remain implacably opposed to wood use for almost anything especially biomass? No – I really don’t get it.However, I do hasten to say that Planet Ark is the impressive standout exception to the rule. Founded in 1992, Planet Ark is about practical ways businesses and communities can reduce their impact on the planet. Among other things they have a Make It Wood website. Check it out at www.makeitwood.orgFor now let’s forget about Aussie green campaigns to stop forestry operations and focus just on biomass to energy. Within 15 years Australia could be producing at least 20% of its energy needs from wood residues, but this fact has been almost totally ignored in the present energy debate.Yet in Scandinavia, wood biomass for energy production is embraced by greens, industry, communities and politicians. For example, in central Finland up to 45% of industrial and household energy consumption is produced from wood biomass, mainly sourced from forest thinning, harvesting, or timber processing waste. Tops and slash are bundled or chipped and sold to larger biomass plants that

are equipped to handle it in this form. Overall in Finland, the world leader in energy production from biomass it is more than 25%.In Sweden, the share of the national energy total produced from wood biomass is over 20%, approaching the energy produced from the seven remaining nuclear plants. The Swedes have recently decommissioned two nuclear plants and have announced the intention of decommissioning their remaining seven as they can replace them with renewable energy sources, mainly with biomass fuelled plants. The Swedes have set clear targets for independence

from imported fossil fuels and aim to have ceased fuel imports by 2025, including increasing biomass to energy production from the present 20% to 40%.Denmark and the other Scandinavian countries are also on the bandwagon and have active government policies and incentives to encourage biomass to energy production.While the Scandinavians know

it, the Australian greens appear not willing to comprehend that a key issue in favour of bioenergy as a by-product of sustainably managed plantations and forests is that it is approximately carbon neutral.It can be argued that overall it is carbon positive as the use of woody fuels replaces the equivalent energy value of fossil fuels. In addition some of the ash the wood combustion process is a useful product in itself as a potential component of agricultural fertiliser. About a million tonnes of non-coal ash is produced every year in Sweden.And if all that isn’t bad enough for Australia’s image – after being beaten by the Scots in rugby – a 44 megawatt power plant to be fuelled by wood biomass has been built near Lockerbie in southern Scotland, using 475,000 tonnes a year of thinnings, harvesting residues, sawmill waste and 90,000 tonnes from chipped short rotation willow coppice. The plant powers 70,000 homes and has created in the vicinity to 300 new jobs in forestry and farming.On top of all this, off-the-shelf power plants fuelled by wood biomass are relatively cheap, have low visual impact and come in all sizes. They can be fuelled by a wide range of woody biomass and by alternative solid flammable wastes, such as straw, nut husks or olive pits.Why is it then that biomass energy has had such a slow start in Australia? Information about the latest available wood biomass to energy systems technology is widely available. These systems can now be purchased in all sizes from two megawatts – enough for a small

In Finland up to 45% of industrial and household energy consumption is produced from wood biomass, mainly sourced from forest thinnings, harvesting or timber processing waste.

Wake up Australia .. woodto energy is real no-brainer


Cont Page 19

Deep in the Woodswith ..

Cheryle ForresterWithin 15 years Australia could be producing at least 20% of its energy needs from wood residues, but this

fact has been almost totally ignored in the

present energy debate

http://www.makeitwood.org

http://www.makeitwood.org



The Cat 553C wheeled feller buncher (pictured) is the third model in the C series line-up.The 553C and 573C were launched towards the end of 2011.The new 553C contains all the advancements found in the first two models, but has a different engine. It is equipped with the 174 hp (130 kW) Cat C6.6 ACERT engine, while the 563C and 573C are equipped with the Cat C7.1 ACERT engine. The 563C has wheelbase of 2,794 mm and weighs 13,862 kg.The C series machines have been designed to be more versatile than previous models; they have a longer wheel base and new engine position, which improves stability. Machine width has been maintained which provides a tighter turning radius for good manoeuvrability in thinning.Caterpillar says fuel

consumption is better than previous models due to power only being delivered where and when it is needed, thanks to a new technology called PowerDirect Plus. This results in better performance from all functions on both flat and steep slopes. Cat also claims that simultaneous lift-tilt and lift-steer functions are faster than their major competitors, and saw recovery time is also faster.Other general areas of improvement in the C series are ground level servicing, a high performance hydraulic control valve, pressurised and separated engine compartments to keep debris from entering, and an improved cab for operator ergonomics.

rural community – to more than 500 megawatts, such as one at Pietarsaari in Finland, enough to power a city of hundreds of thousands of residents .. so we don’t have any remaining excuses.In addition to electricity production, extracting biofuels from wood biomass is seen as the principal way to reduce reliance on imported fossil fuels. In an Australian context, plantation, forest and wood processing are all sources of wood biomass.It would be easy, in terms of available technology and biomass to build several 10

megawatt or larger electricity plants and / or biofuel plants and co-fire these plants with a mix of woody biomass and flammable industrial and domestic waste – as they are increasingly doing in Scandinavia and northern Europe.The implications from utilising biomass for the profitability of plantation and forest management activity in Australia are significant at a time when investment in forestry is almost non-existent.Of course we need a federal government that demonstrates some receptiveness to forestry – we need to work on that. What do you think? Catch you in a couple of weeks.

This section is supported by the Australian Forest Contractors Association

Wood biomass will help reducereliance on imported fossil fuels


Implications from utilising biomass for the profitability of plantation and forest management activity are significant at a time when investment in forestry is almost non-existent

From Page 18

Cat’s new wheeled feller buncher real ‘turn-on’



study challenges views heldabout western US forest firesHistoric surveys provide a surprisingly detailed record

SCIENTISTS in the US using field notes from surveys first conducted by the government before the Civil War believe they’ve gained a better understanding of how western wildfires behaved historically.Researchers at the University of Wyoming studied historical fire patterns across millions of hectares of dry western forests. Their findings challenge the current operating protocol of the US Forest Service and other agencies that today’s fires are burning hotter and more frequently than in the past.Combing through 13,000 first-hand descriptions of forests and retracing steps covering more than 400 km in three states, where teams of government land surveyors first set out in the mid-1800s to map the nation’s wild lands, the researchers said they found evidence forests then were much denser than previously believed.“More highly intense fire is not occurring now than historically in dry forests,” says William Baker, who teaches fire ecology and landscape ecology in Laramie, Wyoming, where he’s been doing research for more than 20 years.“These forests were much more diverse and experienced a much wider mixture of fire than we thought in the past, including substantial amounts of high-severity fire.”If he’s right, he and others say it means fuel-reduction programs aimed at removing trees and shrubs in the name of easing

fire threats are creating artificial conditions that likely make dry forests less resilient.“It means we need to rethink our management of western dry forests,” says Mr Baker, a member of a US Fish and Wildlife Service working group that is developing plans to help bolster northern spotted owl populations in dry forests.Mr Baker’s conclusions have drawn sharp criticism from other long-time researchers who believe that decades of

fire suppression have led to more densely tangled forests and more intense fires, the position advanced by the Forest Service.“I have yet to hear any knowledgeable forest or fire

ecologist or forest manager say they are convinced by the main interpretations in that (Wyoming) paper,” Mr Thomas Swetnam, a professor of dendrochronology and director of the Laboratory of Tree Ring Research at the University of Arizona, said.“I doubt it will gain much traction in the scientific or management communities.”William Baker said the historic government land surveys provided researchers with a surprisingly detailed and precise record.The studies by Baker and others over the past two years focused on parts of Colorado, Oregon and Arizona, but were indicative of dry forest types stretching from the Rockies to the Sierra Nevada previously thought to be ‘open and park-like’ and typically enduring only cycles of frequent, low-severity fire.“The major surprising finding was .. areas of high density of forest and higher severity fires in really all dry forests across the west,” says Mark Williams, who co-authored two of the three studies with Mr Baker.“The notes are pretty descriptive,” Mr Williams said.“You can look for where the fire started and ended. We were actually walking the same lines, collecting fire scars from trees.”Wallace Covington, the director of the Ecological Restoration Institute at Northern Arizona University, takes no issue

Human fire suppression

activity during the past

100 years has created dense, more crowded

forests

US western fires .. better understanding of how wildfires behaved historically.

Jennifer Marlon .. trend from high fire in the 1800s to very low fire in the 1900s is strong and clear from three independent datasets.

Cont Page 7


http://www.industrye-news.com


with the Wyoming duo’s data collection or statistical analysis but said some of Mr Baker’s conclusions don’t follow from his data. Covington first testified before Congress in 2002 about the urgent need to thin forests to guard against catastrophic wildfires and insists it’s still necessary.Others say the Wyoming studies are important new information in an emerging field of research.Jennifer Marlon, a Yale University paleoecologist, said a study she recently led on the impact of climate change on forests over thousands of years appeared to be largely consistent “with Baker’s idea

that there were large, severe fires even in dry forests historically”.The fire record her team built for the western US for the past 3000 years shows “that fires during the 20th century generally are actually fewer and smaller than ever before given

current climate conditions,” Ms Marlon said, emphasising the role of climate on wildfire.“The general trend from high fire in the 1800s to very low fire in the 1900s is strong and clear from three independent datasets,” she said. “Open park-like conditions may have

indeed occurred after the ‘peak’ in burning during the mid-1800s.”An updated view was summarised in the 2012 spring edition of California Forests: “Human fire suppression activity during the past 100 years has created dense, more crowded forests and shifted the fire regime in Sierran mixed conifer forests from one of frequent, low-level fire to one where high intensity wildfires are more common,” wrote John Battles, chairman of ecosystem sciences in Department of Environmental Science, Policy and Management at the University of California, Berkeley. – Associated Press

COPYRIGHT NOTICE Items provided in this section of Timber & Forestry E news are drawn from a number of sources. The source of the item is quoted, either by publication or organizations in line with the practice of fair reporting.

INTERNATIONAL FOCUS

Fires during the 20th century generallyare fewer and smaller than ever before

From Page 20


Advertising: Tel +61 7 3266 1429 Email: [email protected] PAgE | issuE 232 | 30.07.1222 Advertising: Tel +61 7 3266 1429 Email: [email protected] 15ISSUE 203 | 12.12.11 | PAGE

Advertising SalesCustom Publishing Group

e: [email protected]

ProductionT: 0439 417 671e: [email protected]

www.industrye-news.com

Timber & Forestry e news is publishedby Custom Publishing Group.

Timber & Forestry e news is a full colour e magazineemailed every Monday to Decision Makers withinthe Australian and New Zealand Timber and Forestrysectors.

Advertising is booked with a minimum 4 weekbooking with discounts for 12, 24 and 48 weekbookings.

12 week- 7.5% Discount24 week- 10% Discount48 week- 15% DiscountClassified ads can be booked in a per issue basis.All advertisements link to customer websites oremail address with an option for rich text (flash).

BENEFITS:

DIRECT PENETRATION via email.WEEKLY opposed to monthly alternatives.NEWS that is up to date that will ensure readership.COST EFFECTIVE advertising rates.

All prices quoted plus GST and based on Art being supplied.We can create artwork if required – Eighth/Quarter $44 Half $66 which will be billed if complete art is notsupplied to our specifications.

Video: Maximum 3 meg swf file.

Due to the regularity of timber & forestry e news and the tight deadlines no customer proofs can be sent.

SDisplay Ads

Rate Size Specificationsper Issue + GST Height x Width

Full Page Bleed $380 303mm x 216mm Half Page Vertical $210 254mm x 93mm Half Page Horizontal $210 125mm x 190mm Third Page Horizontal $165 73mm x 190mmQuarter Page Vertical $138 125mm x 93mmEighth Page $83 60mm x 93mmFront Page Third Horizonal $203 73mm x 190mmFront Page Masthead $90 33mm x 45mm

ClassifiedsHalf Page Vertical $182 220mm x 93mm

Quarter Page Vertical $120 107mm x 93mm

Eighth Page Horizontal $72 51mm x 93mm

Full Page Bleed $330 303mm x 216m

Display Ads Minimum 4 issue booking

Classified Ads per week

Extras: Video Available

Artwork Specifications: Please supply all artwork as High Resolution (300dpi) Pdf’s or jpegs.Send artwork to [email protected]

DISPLAY DEADLINES Booking – Noon Wednesday for Monday edition. Material – Noon Thursday

Terms: Account Clients- 14 days New Accounts: Payment on Booking All Classifieds- Payment on booking (Credit card preferred)

RATES

T: (07) 3266 1429

Video next to front cover $200 per issue. Within the magazine $165 per issue.

Banner Ads & Classified AdSalese: [email protected]

CLASSIFIED DEADLINES Bookings & Material – Noon Friday

Nominations Nominations

Excellence :: Recognition :: CelebrationExcellence :: Recognition :: Celebration

The Queensland Timber Industry Awards are an important means of highlighting excellence in our industry and rewarding organisations who are leading the way in terms of service, innovation and commitment to improving both their business and the industry as a whole. The gala evening when these awards are presented is the only event of its kind; it provides a platform to celebrate our industry, our state and recognise our top performers. This evening is set for Saturday 3 November 2012 at Victoria Park Function Centre, Brisbane.

To maintain the credibility of these awards and therefore the prestige and honour they represent for finalists and winners, the judging criteria for 2012 have been adjusted to reflect recent ideals and trends as well as give greater weight to operational areas of importance. The criteria for each category is available to view on the website, www.tabma.com.au - Queensland - Information Sheets - 2012 QTI Awards Criteria.

Award Categories 2012Award Categories 2012 Best Specialist Timber Merchant

Best Building Materials Centre (Metro)

Best Building Materials Centre (Regional)

Best Timber Wholesale Operation

Best Specialist Service Operation

Best Training Culture

Best Wholesale Sales Representative

Best Frame & Truss Operation (Metro)

Best Frame & Truss Operation (Regional)

Best Timber Manufacturing Operation

Best Sawmilling Operation

Trainee of the Year

Apprentice of the Year

Recognising Women In Forest & Timber

If you wish to nominate please visit www.tabma.com.au - Queensland - News and Events - 2012 QLD Timber Industry Awards Nomination Form and complete an entry for each nomination. All nominations will be kept confidential and only be seen by TABMA Queensland management and judges. Nominations close 15 June 2012.

Introducing the Sponsor’s...

Sponsorship packages are still available.


http://www.tabma.com.au

http://www.tabma.com.au

Advertising: Tel +61 7 3266 1429 Email: [email protected] 23issuE 232 | 30.07.12 | PAgEAdvertising: Tel +61 7 3266 1429 Email: [email protected] 15ISSUE 203 | 12.12.11 | PAGE

Advertising SalesCustom Publishing Group

e: [email protected]

ProductionT: 0439 417 671e: [email protected]

www.industrye-news.com

Timber & Forestry e news is publishedby Custom Publishing Group.

Timber & Forestry e news is a full colour e magazineemailed every Monday to Decision Makers withinthe Australian and New Zealand Timber and Forestrysectors.

Advertising is booked with a minimum 4 weekbooking with discounts for 12, 24 and 48 weekbookings.

12 week- 7.5% Discount24 week- 10% Discount48 week- 15% DiscountClassified ads can be booked in a per issue basis.All advertisements link to customer websites oremail address with an option for rich text (flash).

BENEFITS:

DIRECT PENETRATION via email.WEEKLY opposed to monthly alternatives.NEWS that is up to date that will ensure readership.COST EFFECTIVE advertising rates.

All prices quoted plus GST and based on Art being supplied.We can create artwork if required – Eighth/Quarter $44 Half $66 which will be billed if complete art is notsupplied to our specifications.

Video: Maximum 3 meg swf file.

Due to the regularity of timber & forestry e news and the tight deadlines no customer proofs can be sent.

SDisplay Ads

Rate Size Specificationsper Issue + GST Height x Width

Full Page Bleed $380 303mm x 216mm Half Page Vertical $210 254mm x 93mm Half Page Horizontal $210 125mm x 190mm Third Page Horizontal $165 73mm x 190mmQuarter Page Vertical $138 125mm x 93mmEighth Page $83 60mm x 93mmFront Page Third Horizonal $203 73mm x 190mmFront Page Masthead $90 33mm x 45mm

ClassifiedsHalf Page Vertical $182 220mm x 93mm

Quarter Page Vertical $120 107mm x 93mm

Eighth Page Horizontal $72 51mm x 93mm

Full Page Bleed $330 303mm x 216m

Display Ads Minimum 4 issue booking

Classified Ads per week

Extras: Video Available

Artwork Specifications: Please supply all artwork as High Resolution (300dpi) Pdf’s or jpegs.Send artwork to [email protected]

DISPLAY DEADLINES Booking – Noon Wednesday for Monday edition. Material – Noon Thursday

Terms: Account Clients- 14 days New Accounts: Payment on Booking All Classifieds- Payment on booking (Credit card preferred)

RATES

T: (07) 3266 1429

Video next to front cover $200 per issue. Within the magazine $165 per issue.

Banner Ads & Classified AdSalese: [email protected]

CLASSIFIED DEADLINES Bookings & Material – Noon Friday

Nominations Nominations

Excellence :: Recognition :: CelebrationExcellence :: Recognition :: Celebration

The Queensland Timber Industry Awards are an important means of highlighting excellence in our industry and rewarding organisations who are leading the way in terms of service, innovation and commitment to improving both their business and the industry as a whole. The gala evening when these awards are presented is the only event of its kind; it provides a platform to celebrate our industry, our state and recognise our top performers. This evening is set for Saturday 3 November 2012 at Victoria Park Function Centre, Brisbane.

To maintain the credibility of these awards and therefore the prestige and honour they represent for finalists and winners, the judging criteria for 2012 have been adjusted to reflect recent ideals and trends as well as give greater weight to operational areas of importance. The criteria for each category is available to view on the website, www.tabma.com.au - Queensland - Information Sheets - 2012 QTI Awards Criteria.

Award Categories 2012Award Categories 2012 Best Specialist Timber Merchant

Best Building Materials Centre (Metro)

Best Building Materials Centre (Regional)

Best Timber Wholesale Operation

Best Specialist Service Operation

Best Training Culture

Best Wholesale Sales Representative

Best Frame & Truss Operation (Metro)

Best Frame & Truss Operation (Regional)

Best Timber Manufacturing Operation

Best Sawmilling Operation

Trainee of the Year

Apprentice of the Year

Recognising Women In Forest & Timber

If you wish to nominate please visit www.tabma.com.au - Queensland - News and Events - 2012 QLD Timber Industry Awards Nomination Form and complete an entry for each nomination. All nominations will be kept confidential and only be seen by TABMA Queensland management and judges. Nominations close 15 June 2012.

Introducing the Sponsor’s...

Sponsorship packages are still available.


mailto:ccaannccoonn@@bbiiggppoonndd..nneett..aauu



http://www.industrye-news.com


Download - Issue 232 Timber & Forestry E News

Top Related