Download - Junction Boxes Enclosures
-
7/22/2019 Junction Boxes Enclosures
1/13
TERMINAL BOXES
ELECTRICAL ENCLOSURES
HAZARDOUS AREA ENCLOSURES
SPECIAL PURPOSE ENCLOSURES
ABTECH
ENCLOSURE SPECIALISTS FOR THE ELECTRONICS, INSTRUMENTATION,
MARINE, OIL, GAS AND PETRO-CHEMICAL INDUSTRIES
-
7/22/2019 Junction Boxes Enclosures
2/13
A B T E C H B P G R A N G E
The BPG range comprises 16 sizes of
enclosure manufactured in glass reinforced
polyester. The polyester is highly resistant to
contamination from oils, fats, aliphatic and
aromatic carbohydrates, bacteria and
enzymes. It is also suitable for LSOH (low
smoke zero halogen) applications. This
material gives excellent mechanical strength
and life expectancy. The wall thickness is
sufficient to allow tapped entry holes to be
machined in the walls of the enclosure and itprovides a very good alternative to
aluminium or cast iron.
Abtech mould the BPG range from SMC
material rather than DMC which is the most
common form of GRP. In this method the
glass reinforcement takes the form of sheets
rather than short strands. This gives much
greater mechanical strength and also in the
event of the enclosure being exposed to fire
conditions the structure holds together even
if the resin is depleted due to the elevated
temperatures as demonstrated by the fact
that the BPG range when fitted with ceramic
terminals meets the requirements of IEC 331
(750C for 3 hours) and also BS6387/1983
(950C for 3 hours - flame only).
Due to the enclosures labyrinth seal system,
whereby the seal is protected from external
forces, the BPG enclosure has excellent
ingress protection qualities which mean thatthe enclosure is tested to and passed
IP66/67 and has also undergone and
passed the Shell/ERA deluge test which was
devised to adequately test enclosures and
electrical equipment which is routinely
subjected to ships decks conditions or fire
deluge systems. The mounting holes,
although contained within the profile of the
enclosure, sit outside the seal and all
external fasteners and fixings are
manufactured from 316 grade stainless steel
to ensure reliability.
The BPG range has many features which
lend itself to a whole host of applications
including both industrial and hazardous
area, junction boxes, OEM applications, fire
protection systems, tunnel wiring etc. The
BPG range can be machined, drilled, tapped
with various thread forms, painted and of
course it can be moulded in a variety of
colours which gives a much improved
durability of colour over painting.
The BPG range is also available carbon
loaded (BPGC) which helps to reduce the
surface resistance of the material and
consequently reduce the risk of spark from
static build up.
Earthing can be acomplished by various
means. External/internal earth stud which inturn can be connected to the termina
mounting rail or component mounting plate,
an ECP (earth continuity plate) can be fitted
around the inner walls to provide continuity
for cable glands and various in rail mounted
earth terminals or proprietary earth bars can
be fitted inside the enclosure.
When fitted with a standard neoprene gasket
the enclosure is suitable for ambient
temperatures of -40C to 80C. Alternatively
when fitted with an optional silicone gasket
the temperature range is increased to -70C
to 130C. For certified apparatus contact
Sales Department for ambient operating
temperatures.
The BPG and BPGC enclosures are suitable
for use in hazardous areas and can be
supplied with a number of certificates,
specifically ATEX EEx e to BS EN 50019
(zone 1 & 2) EEx nA to BS EN50021 (zone
2) and NEMA 4X (CSA, UL & FM class 1, div
2). The BPG range can be supplied fitted
with any component approved terminal to
apparatus level or can be supplied empty as
component approved for the clients own
certification requirements.
-
7/22/2019 Junction Boxes Enclosures
3/13
A B T E C H B P G R A N G E
ECPCopper earth continuity plate.(Must also be fitted with earth stud)
ESEarth Stud.(May be brass or stainless steel)
ALAllen head fixing screw.(Stainless steel grade 316)
TPTamper-proof screws.(Requires special tool for removal)
HExternal hinges.
MComponent mounting plate.(Tufnol - standard, steel - option)
FExternal mounting feet.(Stainless steel grade 316)
EInternal earthing bar.(Can be fitted with clamps)
TDIN standard mounting rail.(TS15, TS32 or TS35, please specify)
A C C E S S O R I E SThe following table is a list of the available accessories suitable for particular sizes of BPG enclosures. Care should be taken when ordering
accessories for use with enclosures intended for hazardous areas to ensure that compliance with certification is retained.
SIZE DIMENSIONSC Ex ECP ES AL TP H M F E SIL T RFI
BPG1 80 x 75 x 55 n n n n n n n n n
BPG2 110 x 75 x 55 n n n n n n n n n
BPG3 160 x 75 x 55 n n n n n n n n n
BPG4 190 x 75 x 55 n n n n n n n n n
BPG4.5 190 x 75 x 75 n n n n n n n n n
BPG5 230 x 75 x 50 n n n n n n n n n
BPG6 122 x 120 x 90 n n n n n n n n n n n n n
BPG7 220 x 120 x 90 n n n n n n n n n n n n n
BPG8 160 x 160 x 90 n n n n n n n n n n n n n
BPG9 260 x 160 x 90 n n n n n n n n n n n n n
BPG10 360 x 160 x 90 n n n n n n n n n n n n n
BPG11 560 x 160 x 90 n n n n n n n n n n n n n
BPG12 255 x 250 x 120 n n n n n n n n n n n n n
BPG13 400 x 250 x 120 n n n n n n n n n n n n n
BPG14 600 x 250 x 120 n n n n n n n n n n n n n
BPG15 400 x 405 x 120 n n n n n n n n n n n n n
C - Carbon Loaded (gives surface tracking value of between 106and 109 ohms).
Ex - Ex certified (may be component or apparatus certified - please specify requirements).
RFI - Fitted with RFI gasket and internally coated with RFI sheilding (depending on gasket used, may reduce IP rating).
SIL - Silicone gasket giving greater temperature range (may also increase life when used in certain applications).
-
7/22/2019 Junction Boxes Enclosures
4/13
SCSPOWER
RATING(S)
NO.OFROWS
BK
4(4way
BK6(6way)
BK
12(12way)
MK6/4
MK6/6
SAK2.5
SAK4
SAK6N
SAK10
SAK16
SAK35
GS/4(4way)
GS/6(6way)
GS/12(12way)
K3
UK3
K5
UK5
K10
UK10
K16
UK16
UK35
WEIDMULLER PHOENIX
SIZE
WAGO
8.390
8.551
8.833
9.012
9.260
9.378
10.500
10.34811.933
13.793
18.338
15.474
15.474
20.867
20.867
30.384
30.384
31.350
31.350
31.350
SIZE
Solid mm2 4 4 4 6 6 4 6 10 16 16 501 4 4 4 4 4 4 4 10 10 16 16 35
Stranded mm2 4 6 10 16 16 35 4 6 10 16 35 4 4 4 2.5 2.5 4 4 6 6 10 10 35
CURRENT(A) 21 21 21 26 26 21 28 36 50 66 21 21 21 21 21 21 21 37 37 47 47 75
TERMINAL TYPE
BOX TYPE
BPG 1 1 1 1 - 1 - - - - - - - 1 1 - - - - - - - - - -
BPG 2 1 2 1 - 1 1 - - - - - - 2 1 - - - - - - - - - -
BPG 3 1 3 - 1 2 1 - - - - - - 3 2 1 - - - - - - - - -
BPG 4 1 4 - 1 3 2 - - - - - - 4 3 1 - - - - - - - - -
BPG 5 1 5 3 2 4 2 - - - - - - 5 3 2 - - - - - - - - -
BPG 6 1 - - - - - 10 9 7 6 5 3 - - - 12 12 10 10 6 6 6 6 4
BPG 7 1 - - - - - 26 24 20 16 13 10 - - - 30 30 25 25 19 19 15 15 10
BPG 8 1 - - - - - 16 15 12 9 8 5 - - - 19 19 16 16 12 12 9 9 5BPG 9 1 - - - - - 33 30 25 20 16 12 - - - 38 38 32 32 24 24 19 19 13
BPG 10 1 - - - - - 48 45 36 29 24 18 - - - 56 56 48 48 36 36 29 29 18
BPG 11 1 - - - - - 80 74 61 48 41 30 - - - 94 94 78 78 58 58 46 46 32
BPG 12 1 - - - - - 31 29 24 19 16 12 - - - 37 37 31 31 23 23 18 18 12
BPG 12 2 - - - - - 62 58 48 38 - - - - - 74 74 62 62 46 46 36 36 -
BPG 13 1 - - - - - 55 50 41 33 27 20 - - - 64 64 53 53 40 40 32 32 22
BPG 13 2 - - - - - 110 100 82 66 - - - - - 128 128 106 106 80 80 64 64 -
BPG 14 1 - - - - - 87 81 66 52 41 32 - - - 103 103 86 86 64 64 51 51 34
BPG 14 2 - - - - - 174 162 132 104 82 64 - - - 206 206 172 172 128 128 102 102 -
BPG 15 1 - - - - - 55 50 41 33 27 20 - - - 64 64 53 53 40 40 32 32 22
BPG 15 2 - - - - - 110 100 82 66 54 - - - - 128 128 106 106 80 80 64 64 -
BPG 15 3 - - - - - 110 100 82 66 81 - - - - 192 192 159 159 120 120 - - -
The above power ratings apply to an ambient operating temperature of 40C. Reduced power ratings are available for ambient temperatures up to +65C.
A B T E C H B P G R A N G E
Stranded mm2 2.5 2.5 4 4 4 6 10 16 35 2.5 4 2.5 2.5 2.5 2.5 2.5 2.5
CURRENT(A) 23 20 30 30 30 39 53 72 120 23 30 23 23 23 23 23 23
TERMINAL TYPE
BOX TYPE
BPG 1 8.390 1 - - - - - - - - - - - 6 3 6 3 6 3
BPG 2 8.551 1 - - - - - - - - - - - 10 5 10 5 10 5
BPG 3 8.833 1 - - - - - - - - - - - 18 9 18 9 18 9
BPG 4 9.012 1 - - - - - - - - - - - 24 12 24 12 24 12
BPG 5 9.260 1 - - - - - - - - - - - 30 15 30 15 30 15
BPG 6 9.378 1 14 14 12 12 12 9 7 6 - 14 12 12 6 12 6 12 6
BPG 7 10.500 1 32 32 27 27 27 21 17 14 - 32 27 27 13 27 13 27 13
BPG 8 10.348 1 19 19 16 16 16 13 10 8 - 19 16 16 8 16 8 16 8
BPG 9 11.933 1 38 38 33 33 33 25 20 17 - 38 33 33 16 33 16 33 16
BPG 10 13.793 1 56 56 49 49 49 38 30 25 - 56 49 49 24 49 24 49 24
BPG 11 18.338 1 94 94 81 81 81 62 50 42 - 94 81 81 40 81 40 81 40
BPG 12 15.474 1 36 36 32 32 32 25 20 16 11 36 32 32 16 32 16 32 16
BPG 12 15.474 2 72 72 64 64 64 50 40 32 - 72 64 64 32 64 32 64 32
BPG 13 20.867 1 65 65 55 55 55 42 34 28 19 65 55 55 27 55 27 55 27
BPG 13 20.867 2 130 130 110 110 110 84 68 56 - 130 110 1 10 55 110 55 110 55
BPG 14 30.384 1 102 102 88 88 88 67 54 45 31 102 88 88 44 88 44 88 44
BPG 14 30.384 2 104 104 176 176 176 134 108 90 - 104 176 176 88 176 88 176 88
BPG 15 31.350 1 130 130 55 55 55 42 34 28 19 130 55 55 27 55 27 55 27
BPG 15 31.350 2 260 260 110 110 110 84 68 56 - 260 110 1 10 55 110 55 110 55
BPG 15 31.350 3 390 390 165 165 165 126 102 84 - 390 165 165 81 165 81 165 81
SCS
POWER
ratings
(W)
NO.
OFROWS
280
-
991
280
-
699
281
-
691
281-
991
281
-
695
282
-
691
284
-
691
283
-
691
285
-
691
280
-
698
281
-
693
264
-
120
264
-
220
2642Cond.
Strip
2644Cond.
Strip
2622Cond.
Strip
2624Cond.
Strip
The above power ratings apply to an ambient operating temperature of 40C. Reduced power ratings are available for ambient temperatures up to +65C.
In some instances the terminal content shown above exceeds the power rating if all terminals are used at full certified current rating. In this instance steps
should be taken to ensure the power rating is not exceeded.
The ABTECH BPG Ex range, when fitted with any component certified EExe terminals, is Sira ATEX certified to EN 50 014 and EN 50 019. The empty enclosure
is component certified and available for adding clients components subject to final approval by Sira or any recognised certifying authority. ABTECH have many
years experience in the application of enclosures in hazardous areas and will be pleased to offer advice for any enclosure problems.
The power rating refers to the permitted power losses inside the enclosure. It is the responsibility of the user to keep power losses within these limits. Annex C2
T E R M I N A L C O N T E N T SThe following tables are provided as a guide only. Due to space limitations only Weidmuller, Wago and Phoenix terminal populations are shown. Any
component certified terminal may be fitted to the BPG range provided compliance with the terminal manufacturers component certificate is adhered to.
-
7/22/2019 Junction Boxes Enclosures
5/13
A B T E C H B P G R A N G E
ab123
Glass reinforced polyester enclosures offering protection to IP 67.Temp range -40C to 80C with standard gasket or -70C to 130Cwith silicone gasket. Standard finish as moulded isRAL 7001 grey or black for BPGC.Can be moulded in variety of colours.
BPG 2/BPGC 2Size: 110 x 75 x 55mmWeight: 230gRating: 8.551Watts
BPG 1/BPGC 1Size: 80 x 75 x 55mmWeight: 230gRating: 8.390Watts
BPG 3/BPGC 3Size: 160 x 75 x 55mmWeight: 405gRating: 8.833Watts
BPG 4/BPGC 4Size: 190 x 75 x 55mmWeight: 450g
Rating: 9.012Watts
-
7/22/2019 Junction Boxes Enclosures
6/13
A B T E C H B P G R A N G E
ab123
Glass reinforced polyester enclosures offering protection to IP 67.Temp range -40C to 80C with standard gasket or -70C to 130Cwith silicone gasket. Standard finish as moulded isRAL 7001 grey or black for BPGC.Can be moulded in variety of colours.
BPG 6/BPGC 6Size: 122 x 120 x 90mmWeight: 750gRating: 9.378Watts
BPG 5/BPGC 5Size: 230 x 75 x 50mmWeight: 529gRating: 9.260Watts
BPG 7/BPGC 7Size: 220 x 120 x 90mmWeight: 1060gRating: 10.500Watts
BPG 8/BPGC 8Size: 160 x 160 x 90mmWeight: 1130g
Rating: 10.348Watts
76
110
-
7/22/2019 Junction Boxes Enclosures
7/13
A B T E C H B P G R A N G E
ab123
Glass reinforced polyester enclosures offering protection to IP 67.Temp range -40C to 80C with standard gasket or -70C to 130Cwith silicone gasket. Standard finish as moulded isRAL 7001 grey or black for BPGC.Can be moulded in variety of colours.
BPG 10/BPGC 10Size: 360 x 160 x 90mmWeight: 2150gRating: 13.793Watts
BPG 9/BPGC 9Size: 260 x 160 x 90mmWeight: 1170gRating: 11.933Watts
BPG 11/BPGC 11Size: 560 x 160 x 90mmWeight: 3200gRating: 18.338Watts
BPG 12/BPGC 12Size: 255 x 250 x 120mmWeight: 2656g
Rating: 15.474Watts
-
7/22/2019 Junction Boxes Enclosures
8/13
A B T E C H B P G R A N G E
ab123
Glass reinforced polyester enclosures offering protection to IP 67.Temp range -40C to 80C with standard gasket or -70C to 130Cwith silicone gasket. Standard finish as moulded isRAL 7001 grey or black for BPGC.Can be moulded in variety of colours.
BPG 15/BPGC 15Size: 400 x 405 x 120mmWeight: 5580gRating: 31.350Watts
BPG 14/BPGC 14Size: 600 x 250 x 120mmWeight: 5235gRating: 30.384Watts
BPG 13/BPGC 13Size: 400 x 250 x 120mmWeight: 3650gRating: 20.867Watts
-
7/22/2019 Junction Boxes Enclosures
9/13
A B T E C H B P G A R A N G E
The Abtech BPGA range comprises three types of
BPG enclosures in two different sizes which are
available pre-assembled and readily available off the
shelf. They are ideal for a range of uses such as
lighting, power and instrument junction boxes.
They are manufactured in impact resistant glass
reinforced polyester which has an ingress protection
rating of IP66/67 and are Shell/ERA deluge tested.
The enclosures come equipped with terminals as shown
in the table below, copper earth continuity plate and
brass M6 internal/external earth stud. The enclosure is
pre-drilled with four M20 tapped cable entries and is
supplied complete with EEx e certified blanking plugs.
The range is ATEX certified EEx e and is suitable for
use in Category 2/Zone 1 and Category 3/Zone 2 areas
according to EN 60079-14 with a working ambient
temperature of between -20C and +40C.
SPECIFICATION BPGA 120 BPGA 125 BPGA 160
Size (external) 122 x 120 x 90 122 x 120 x 90 160 x 160 x 90
Entries 4 x M20 (2 x A, 2 x C) 4 x M20 (2 x A, 2 x C) 4 x M20 (2 x A, 2 x C)
EEx e Blanking plugs 3 3 3
Terminals 6 x SAK 2.5 1 x MK6/6 way 13 x SAK 2.5
Links Linked in pairs Linked in pairs na
Int/Ext M6 earth stud Yes Yes Yes
Copper earth continuity plate Yes Yes Yes
Ingress Protection (IP) IP 66/67 IP 66/67 IP 66/67
Shell/ERA Deluge tested Yes Yes Yes
-
7/22/2019 Junction Boxes Enclosures
10/13
A B T E C H S X R A N G E
The SX range comprises 14 sizes of
enclosure manufactured in either mild steel
or stainless steel. Depending on the
enclosure size they are available in standard
depths of 140, 200 or 300mm and can be
fitted with removable gland plates on any or
all of the four sides. The mild steel version
(MSX) is available with a number of paint
options (most RAL colours available) and
anti corrosion finishes and advice on this can
be sought from Abtech.
The stainless steel range (SSX) is
manufactured in 316 grade stainless steel to
give the maximum environmental protection.
The main body is manufactured from 2mm
thick sheet and the mounting straps and
gland plates from 3mm thick plate.
Cable entries can be drilled in the sides or
through the gland plates, if fitted, or through
the enclosure wall. Entries may also be
drilled through the rear face of the enclosure
(EEx versions also.)
The SX range was specifically designed to
meet the rigours of the North Sea
environment and is capable of achieving
IP66 and IP67 and has also undergone andpassed the Shell/ERA deluge test which was
devised to adequately test enclosures and
electrical equipment which is routinely
subjected to ships decks conditions or fire
deluge sytems.
IP68 enclosures are aslo available for depths
up to 120 ft to special order.
Another advantage of the SX range is that it
is suitable for fire resistance applications
and when fitted with ceramic terminals
meets the requirements of IEC 331 (750C
for 3 hours) and also BS6387/1983 (950C
for 3 hours).
Another important feature of the SX range is
the door, which is held to the enclosure by at
least 4 captive stainless steel screws, which
also maintain the correct compression onthe gasket. The hinges are solid block,
machined oversize to enable the screws to
control the closing of the door, not the hinge,
its only function being to support the door
when opened. The hinges allow easy
removal of the door with only minimal
opening required before removal (less than
10).
The SX range has many features which lend
itself to many applications, not least of which
is the ability to be constructed to almost any
dimension due to its fabricated nature. This
can also be applied to EEx enclosures
where the certification allows oversize
enclosures to be manufactured whilst
retaining the next smallest sized enclosures
power rating. Other applications include
junction boxes, both industr ial and
hazardous area, OEM applications, fire
protection systems, tunnel wiring, IP68
applications, etc.
Earthing is accomplished by means of an
external/internal earth stud fitted as standard
which can be connected to the termina
mounting rail or component mounting plate
and optionally earth studs can be fitted tothe door and gland plates. Rail mounted
earth terminals or proprietary earth bars can
be fitted inside the enclosure and Abtech
sales staff will be happy to advise on this.
When fitted with a standard neoprene
gasket, the enclosure is suitable for ambient
temperatures of -40Cto 80C. Alternatively
when fitted with an optional silicone gasket
the temperature range is increased to -70C
to 130C.
The SX range of enclosures are suitable for
use in hazardous areas and can be supplied
with a number of certificates. ATEX EEx e to
BS EN 50019 (Zone 1 & 2) EEx nA to BS
EN50021 (Zone 2) and NEMA 4X (CSA, UL &
FM class 1, div 2). The SX range can be
supplied fitted with any component
approved terminal to apparatus level or can
be supplied empty as component approved
for the clients own certification requirements.
-
7/22/2019 Junction Boxes Enclosures
11/13
A B T E C H S X R A N G E
GPGland plates.(Please specify sides to be fitted)
ESEarth Stud fitted to door and gland
plates. (If fitted - specify size req.)
ELElectro-polished.(External surface 316 SS only)
LBLabel bracked.
(Welded to door - specify size)
MComponent mounting plate.(Steel or stainless steel)
EInternal earthing bar.
(Can be fitted with clamps)
A C C E S S O R I E SThe following table is a list of the available accessories suitable for particular standard sizes of SX enclosures. Care should be taken when ordering
accessories for use with enclosures intended for hazardous areas to ensure that compliance with certification is retained.
Size Dimensions GP 140 200 300 EL LB ES E SIL BD TP M RFI
SX45 114 x 114 x 51 n n n n n n n
SX64 102 x 152 x 63 n n n n n n n
SX66 152 x 152 x 102 n n n n n n n n n n
SX0 152 x 229 n n n n n n n n n n n n
SX0.5 184 x 274 n n n n n n n n n n n n
SX1 234 x 324 n n n n n n n n n n n n
SX1.5 306 x 306 n n n n n n n n n n n n
SX2 372 x 324 n n n n n n n n n n n n
SX3 372 x 448 n n n n n n n n n n n n
SX4 372 x 510 n n n n n n n n n n n n
SX5 510 x 510 n n n n n n n n n n n n
SX6 510 x 780 n n n n n n n n n n n n n
SX7 650 x 950 n n n n n n n n n n n n n
SX8 800 x 1250 n n n n n n n n n n n n n
All SX range enclosures are available manufactured in either mild steel - MSX or stainless steel grade 316 - SSX
All SX range enclosures are available Ex certified (component or apparatus certified - please specify requirements)
All SX range enclosures meet IP66/67. When fitted with gland plates the standard IP rating is IP66. IP67 available as option.
RFI - Fitted with RFI gasket (depending on gasket used, may reduce IP rating)
SIL - Silicone gasket giving greater temperature range. (may also increase life when used in certain applications)
EL - Electropolished external enclosure surface (stainless steel 316 only)
BD - Breather drain (IP66 stainless steel or plastic)
TP - Tamper-proof lid fixing screws
DEPTH
-
7/22/2019 Junction Boxes Enclosures
12/13
SCSPOWER
RATING(S)
NO.OFROWS
SAK2.5
SAK6
SAK6
SAK10
SAK16
SAK35
SAK70
UK2.5B
UK3
UK5
UK10
UK16
UK35
KLIPPON PHOENIX
SIZE
WAGO
T E R M I N A L C O N T E N T SThe following table is provided as a guide and due to space limitations in this brochure only Klippon, Wago and Phoenix terminal
populations are shown. All Abtech enclosures are available empty or alternatively may be provided with terminals, entries, accessories and
other electromechanical components.
Solid mm2 4 6 10 16 16 35 70 2.5 4 4 10 16 35
Stranded mm2 4 4 6 10 16 35 70 2.5 2.5 4 6 10 35
ATEX CURRENT(A) 15 22 26 37 47 75 - - - - - - -
TERMINAL TYPE
BOX TYPE
SX 45 1 6 - - - - - - 6 9 - - - -
SX 64 10.258 1 14 12 10 8 - - - 14 16 10 8 - -
SX 66 14.287 2 14 12 10 8 7 4 - 14 16 10 8 7 4
SX 0 19.874 1 17 15 13 10 8 6 3 17 20 13 10 8 6
SX 1 29.206 1 25 25 21 17 14 9 9 25 34 21 17 14 9
SX 1.5 32.284 2 48 48 40 32 13 8 9 48 68 40 32 13 8
SX 2 36.500 2 50 50 42 34 14 9 9 50 68 42 34 14 9
SX 3 42.289 2 90 90 76 60 25 16 12 90 118 76 60 25 16
SX 4 44.726 2 110 110 90 72 30 20 16 110 140 90 72 30 20
SX 5 50.238 3 165 165 135 108 60 40 32 165 210 135 108 60 40
SX 6 57.383 3 300 300 234 189 104 70 58 300 366 234 189 104 70
SX 7 68.000 3 408 408 300 240 198 132 100 408 465 300 240 198 132
4 544 544 400 320 - - - 544 620 400 320 - -
SX 8 119.463 5 915 845 685 550 455 244 230 915 1060 686 550 455 244
6 1098 1014 822 660 - - - 1908 1272 822 660 - -
The above power ratings apply to an ambient operating temperature of 40C. Reduced power ratings are available for ambient temperatures up to +65C.
A B T E C H S X R A N G E
BOX TYPE
SX 45 8.950 1 6 - 5 5 - - - - - 6 5 6 3 6 6 5 4 6 3 6 3
SX 64 10.258 1 12 - 10 10 - - - - - 12 10 12 6 12 12 10 7 12 7 12 6
SX 66 14.287 1 12 12 10 10 10 9 7 6 - 12 10 12 6 12 12 10 7 12 7 12 6
SX 0 19.874 1 21 21 18 18 18 14 11 - - 21 18 10 12 19 14 11 9* 20 12 20 9
SX 1 29.206 1 35 35 29 29 29 23 18 15 10 35 29 32 19 30 23 18 18 32 19 32 15
SX 1.5 32.284 2 70 70 58 58 58 46 36 30 10 70 58 64 38 60 46 36 36 64 38 64 30
SX 2 36.500 2 70 70 58 58 58 46 36 30 10 70 58 64 38 60 56 36 36 64 38 64 30
SX 3 42.289 2 118 118 100 100 100 78 62 52 18 118 100 106 64 104 78 62 62 106 64 106 52
SX 4 44.726 2 140 140 120 120 120 92 74 62 21 140 120 126 76 124 92 74 74 126 76 126 62
SX 5 50.238 3 210 210 180 180 180 138 111 93 42 210 180 189 114 186 138 111 111 189 114 189 93
SX 6 57.383 3 360 360 300 300 300 130 189 156 74 360 300 15 192 318 240 189 189 315 192 314 156
SX 7 68.000 3 450 450 390 390 390 300 240 195 135 450 390 405 240 390 300 240 240 405 240 405 195
4 600 600 520 520 520 400 320 260 - 600 520 540 320 520 400 320 320 540 320 540 260
SX 8 119.463 5 1000 1000 875 875 875 675 550 450 252 1000 875 925 550 920 675 550 550 925 550 925 450
6 1200 1 200 1 050 1 050 1 050 810 660 540 - 1200 1 050 1 110 610 1104 810 660 660 1110 650 1110 540
In some instances the terminal content shown above exceeds the power rating if all terminals are used at full certified current rating. In this instance steps should be taken to ensure the
power rating is not exceeded.
The ABTECH SX Ex range, when fitted with any EExe component approved terminals(1) is Sira certified to EN 50 014 and EN 50 019. The empty enclosure is component certified and
available for adding clients components subject to final approval by Sira or any suitable notified body. ABTECH have many years experience in the application of enclosures in hazardous
areas and will be pleased to offer advice for any enclosure problems.
(1) Any apparatus certified enclosure built after June 2003 must be fitted with ATEX approved terminals or components. Abtech sales staff can provide help and information on anyaspect of
certification in relation to Abtech enclosures.
The power rating refers to the permitted power losses inside the enclosure. It is the responsibility of the user to keep power losses within these limits. Annex C2 of BS EN 50019 details the
appropriate calculation method.
SCS
POWE
R
ratings
(W
)
NO.
OFROW
S
280
-
991
280
-
699
281
-
691
281-
991
281
-
695
282
-
691
284
-
691
283
-
691
285
-
691
280
-
698
281
-
693
264
-
120
264
-
220
281
-
191
282
-
191
284
-
191
283
-
191
2642Cond.
Strip
2644Cond.
Strip
2622Cond.
Strip
2624Cond.
Strip
-
7/22/2019 Junction Boxes Enclosures
13/13
A B T E C H S X R A N G E
abMild steel or stainless steel enclosures offering protection toIP 67. Temp range -40C to 80C with standard gasket or -70Cto 130C with silicone gasket.
MSX/SSX 64Size: 102 x 152 x 102mmWeight: 1.5kgRating: 10.258Watts
MSX/SSX 45Size: 114 x 114 x 51mmWeight: 1.2kgRating: 8.950Watts
MSX/SSX 66Size: 152 x 152 x 102mmWeight: 2.2kgRating: 14.287Watts
MSX/SSX 0Size: 229 x 152 x 140/200mmWeight: 3.2kg (140)
4.0kg (200)Rating: 19.874Watts