Transcript
Page 1: KELZAN S PLUS Xanthan Gum - garzantispecialties.it · KELZAN S PLUS Xanthan Gum hydrates twice as fast as typical dispersible xanthan gum under these conditions. Figure 4: Hydration

KELZAN® S PLUS Xanthan Gum

www.cpkelco.com | E-mail: [email protected]

A Dispersible Xanthan Gum for Industrial Applications

Page 2: KELZAN S PLUS Xanthan Gum - garzantispecialties.it · KELZAN S PLUS Xanthan Gum hydrates twice as fast as typical dispersible xanthan gum under these conditions. Figure 4: Hydration

What If…you could

IMPROVE YOUR MANUFACTURING PROCESS with a more effective water dispersible

xanthan gum?

COST AND PERFORMANCE ADVANTAGES FOR INDUSTRIAL APPLICATIONS REQUIRING A DISPERSIBLE XANTHAN GUM

CP Kelco’s KELZAN Xanthan Gum range is globally recognized for providing effective and reliable rheology modification, stabilization, and suspension in many industrial applications. Our newest innovation, KELZAN S PLUS Xanthan Gum, provides all the key performance features associated with dispersible xanthan gum – easy dispersion; consistent hydration; and excellent stability while providing viscosity and suspension with greater efficiency.

KELZAN® S PLUS Xanthan Gum

COST AND PERFORMANCE ADVANTAGES For industrial applications, KELZAN S PLUS Xanthan Gum provides all the functional benefits that are synonymous with dispersible xanthan gum. These functional properties include effective rheological modification; suspension; stability; and compatibility with salts, acids, temperature, enzymes and high solids. Cost savings can be achieved through a reduction in the xanthan gum use level, ranging from 10% to 20%, depending on the type of application.

Figure 2: Calcium carbonate slurries stabilized with the KELZAN S PLUS product versus the typical xanthan gum product. Better stability was obtained with KELZAN S PLUS Xanthan Gum even at 15% lower use levels.

Figure 1: The shear viscosity profiles of KELZAN S PLUS Xanthan Gum and typical xanthan gum showing the equivalent or higher viscosity results of KELZAN S PLUS Xanthan Gum even when used at 15% lower gum level than the typical xanthan gum product.

SUPERIOR VISCOSITY FOR ENHANCED FUNCTIONALITYKELZAN S PLUS Xanthan Gum was specifically designed to provide higher viscosities at low shear rates than those offered by today’s typical xanthan gums. Why is this important? Viscosity at low shear rates is the key to suspension of particulates and enhanced emulsion stability in a wide range of industrial applications using xanthan gum. The KELZAN S PLUS product’s higher viscosities at low shear rates allow it to provide stabilization superior to that offered by typical xanthan gum.

The benefits an industrial manufacturer can expect from superior low shear rate viscosity are:• Improved stability over time• Enhanced cling• Opportunity to reduce gum use level to achieve the same

performance

Due to the high pseudoplasticity (high viscosity at low shear rates and low viscosity at high shear rates) of KELZAN S PLUS Xanthan Gum, manufacturers will continue to see the ease of pumping benefits that all KELZAN products offer.

0.17% KELZAN S PLUS

0.2% TYPICAL XANTHAN GUM

Page 3: KELZAN S PLUS Xanthan Gum - garzantispecialties.it · KELZAN S PLUS Xanthan Gum hydrates twice as fast as typical dispersible xanthan gum under these conditions. Figure 4: Hydration

What If…you could ENHANCE

PRODUCT STABILITY and SHELF LIFE

with superior pseudoplastic rheology?

PROVEN EFFECTIVENESSThe viscosity of industrial grades of xanthan gum is typically measured using a 1% solution of xanthan gum in de-ionized water, measured using a Brookfield LV viscometer at 60 rpm at 25 °C. While suitable for consistent and easy quality control, this measurement offers no true indication of the product’s actual performance in typical industrial applications due to unrealistic water type, use level, and shear rate.

CP Kelco qualifies KELZAN® S PLUS Xanthan Gum’s performance with a more relevant viscosity test, Low Shear Rate Viscosity (LSRV). The LSRV method utilizes a 0.25% xanthan gum solution prepared in standardized tap water and measured at 3 rpm rotational speed on a Brookfield LV viscometer. This test method provides a better indicator of stability and suspension performance at a more relevant use level and shear rate. The enhanced viscosity of KELZAN S PLUS Xanthan Gum compared to standard xanthan gum can readily be seen by comparing product LSRV.

EASE OF DISPERSION AND HYDRATIONKELZAN S PLUS Xanthan Gum disperses easily in most mix conditions for industrial applications and offers the additional advantage of swelling and hydrating more quickly after dispersion, resulting in faster hydration times than those for many dispersible xanthan gums.

While customers can obtain fastest hydration for glyoxal-treated, dispersible xanthan gum by increasing the pH of the solution after gum dispersion to pH 8.5 or higher, many find this adjustment inconvenient and prefer to lengthen the mix time to fully hydrate the gum. KELZAN S PLUS Xanthan Gum hydrates twice as fast as typical dispersible xanthan gum under these conditions.

Figure 4: Hydration time of KELZAN S PLUS Xanthan Gum using alkali addition to adjust pH to an optimal level for fast hydration (600 rpm mixing, Brookfield 60 rpm viscosity)

Figure 5: Hydration time comparison of KELZAN S PLUS Xanthan Gum and a typical xanthan gum when hydrated into freshwater without pH adjustment (600 rpm mixing, Brookfield 60 rpm viscosity).

Figure 3: Shear viscosity profiles of the KELZAN S PLUS Xanthan Gum and typical xanthan gum at 0.25% gum in freshwater and the approximate shear rate of the Brookfield 3 rpm LSRV measurement.

LSRV

Page 4: KELZAN S PLUS Xanthan Gum - garzantispecialties.it · KELZAN S PLUS Xanthan Gum hydrates twice as fast as typical dispersible xanthan gum under these conditions. Figure 4: Hydration

KELZAN® S PLUS Xanthan Gum

www.cpkelco.com | E-mail: [email protected]

The information contained herein is, to our best knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since we can neither anticipate nor control the different conditions under which this information and our products are used. There are no implied or express warranties of fitness for purpose. Each manufacturer is solely responsible for ensuring the final products comply with any and all applicable federal, country, state and local regulations. Further, CP Kelco disclaims all liability with regard to customers’ infringement of third party intellectual property including, but not limited to, patents. CP Kelco recommends that our customers apply for licenses under any relevant patents.

© 2015 CP Kelco U.S., Inc. (G) without reference to Kelzan S Edited 09/15

ARGENTINACP Kelco Argentina S.A.

Bolivar 187 - 6th A C1066AAC Buenos Aires

Argentina Tel: + 54 11 4331-8483 Fax: + 54 11 4331-8483

BELGIUMCP Kelco Belgium bvba

Horizonlaan 36B-3600 Genk

BelgiumTel : +0032 89 69 01 71Fax : +0032 89 40 02 31

BRAZILCP Kelco Brazil, SA

Rua Teixeira Marques, 845Caixa Postal 21

Chácara São José, LimeiraSão Paulo, BrazilCEP: 13845-127

Tel: +55 19 3404 4600Fax: +55 19 3451 1948

CHINA J.M. Huber Investment

(China) Ltd8th Floor, No.3 Building, No.1535

Hongmei Road, Xuhui DistrictShanghai China 200233Tel: +86 21 6154 8488Fax: +86 21 6154 8499

DENMARKCP Kelco ApSVed Banen 16

DK-4623 Lille SkensvedDenmark

Tel: +45 56 16 56 16Fax: +45 56 16 94 46

DUBAIUNITED ARAB EMIRATES

CP Kelco Services ApOffice # 325, Nucleotide BuildingDUBIOTECH | PO Box 345822

Al Barsha SouthDubai, United Arab Emirates

Tel +971 4 375 8610

FINLANDCP Kelco Oy

Kuhnamontie 2PL 500

FI-44101 ÄänekoskiFinland

Tel: +358 14 518-3000Fax: +358 14 518-3003

FRANCECP Kelco France

123 rue Jules GuesdeFR-92300 Levallois-Perret

FranceTel: +33 1 49 03 78 00Fax: +33 1 49 03 78 29

GERMANYCP Kelco Germany GmbH

Pomosin-Werk 5DE-23775 Großenbrode

GermanyTel: +49 4367 715 0

Fax: +49 4367 715 111

INDIAJ.M.Huber (India)

Pvt Ltd. (CP Kelco)Marwah Centre, 3rd Floor

B wing, Krishanlal Marwah Marg,Off-Saki Vihar Road,

Andheri (East), Mumbai 400072INDIA

Tel: +91 22 4161 5713

JAPANCP Kelco Japan ApS

Higashiazabu IS Bldg. 2F1-8-1 Higashiazabu

Minato-ku, Toyko 106-0044Japan

Tel: +81 3 3560 7313Fax: +81 3 3560 7316

KOREACP Kelco Korea

Room 525, Officetel,The 3rd complex, King’s Garden,

Nae-Su Dong, Jong Ro Gu,Seoul, Korea,110-070Tel: +82 2 545 6022

MEXICOCP Kelco MéxicoTorre Zentrum

Av. Santa Fe 495 piso 4Col. Cruz MancaDel. Cuajimalpa

México 05349, D.F.Tel: +(5255) 33007840Fax: +(5255) 33005510

POLANDCP Kelco Poland Sp. Z.o.o.

Malta Office Parkul. Abpa. A. Baraniaka 88 C

61-131 PoznanTel. +48 61 625 85 55Fax: +48 61 625 85 57

RUSSIACP Kelco ApS

(Moscow Representative Office)Bolshaya Ordynka str., 44, building 4

119017, MoscowRussia

Tel: +7 495 937 36 47/48Fax: +7 495 937 36 27

SINGAPORECP Kelco Singapore Pte. Ltd.

151 Lorong Chuan#04-01A, Lobby A

New Tech ParkSingapore 556741

Tel: +65 6491 9100Fax: +65 6491 9101

UNITED KINGDOMCP Kelco UK Limited

Cleeve Court, Cleeve RoadLeatherhead

Surrey KT22 7UDUnited Kingdom

Tel: +44 (0) 1372 369 400Fax: +44 (0) 1372 369 401

UNITED STATESGLOBAL HEADQUARTERS

CP Kelco U.S., Inc.Cumberland Center II

3100 Cumberland BoulevardSuite 600

Atlanta, GA 30339 USA

Tel: (678) 247-7300 Toll Free: (800) 535-2687

Fax: (678) 247-2797


Top Related