Download - Laminates and Veneer Sheets
2012
www.panelplus.co
LAMINATES & VENEER SHEETS
Laminates &
Veneer Sheets
Kerfkore
Nu Metal™High Pressure Laminates Roll-A-Lam
Mirroflex™
Veneer Sheets
FusionTech
• Fusiontech - pg. 681• Fusiontech Swirl - pg. 681
• Copper Collection - pg. 680• Mesh - pg. 679• Real Stainless Steel - pg. 679• Smooth & Embossed Design Collection - pg. 678• Unique Art Collection - pg. 680
• Econokore - pg. 683• Flexboard - pg. 683• Kerfkore - pg. 682• Timberflex - pg. 683• Ultralite - pg. 682
• 3D Embossed Thermoplastic Sheets - pgs. 676-677• Flexlam Smooth Thermoplastic Sheets - pg. 674
• Flexible Wood (Paper Backing) - pg. 670• Flexible Wood Over Wood - pg. 671
pg. 673
Endless applications are possible with this extremely flexible peel & stick laminate. Four foot wide rolls are offered in 5 metallic finishes and 2 patterns.
Innovative designer patterns are perfect for use on walls, furniture, displays, ceilings and many more interior applictions.
Veneer sheets create the look of solid surface materials while drastically reducing the cost of materials, installation and shipping. From genuine stone and wood to thermoplastic laminates and metals. Veneers are available in a wide range of colors, patterns and textures. Many are also paintable for flexible applications.
Ppgs. 668-683
Mirroflex™ Door Skins
pg. 672
Turn old flat panel doors new again without the expense and time consuming installation. Available in 12 finishes with an easy peel & stick packing.
Fusiontech & fusiontech swirl are exciting design-forward finishes that create visually stunning re-sults. Fusion swirl is available in nominal 4’ x 10’ aluminum sheets mechanically etched & fused with multiple colors that dance in the night. Fusiontech aluminum 4’ x 8’ sheets and imaging using fusion-tech technology. Both are ideal for store fixture, display, hospitality, architectural & interior design applications.
Kerfkore 4’ x 8’ sheets can be formed into curves with a radii as tight as 3-1/2”! Adhere veneers, HPL, sheet metals & other semi-rigid materials to the kerfed board to create cabinetry, reception areas, columns, furniture & more with graceful curves. Available from 1/4” to 3/4” thicknesses with groves running 8’ direction.
Nu Metal™ High Pressure Laminates have the ability to transform a space into the visually remarkable...Sheet size is typically 4’ x 8’ in aluminum, copper & real stainless steel; featuring embossing, handpainted techniques, etching & other innovative techniques. High quality & design solutions are it’s tradmarks.
Veneer Sheets -Flexible Stone
pg. 669
This exciting new product creates the look of solid stone at a fraction of the weight & cost. 2’ x 4’ sheets are made from natural stone, capturing all the beauty & texture found in slates & micas. Lightweight & flexible, the 10 finishes are perfect for interior & exterior applications, cabinets, backsplashes, kitchens, bathrooms, signage, marine & RV, furniture & more.
P-668
P-669
• Can be applied over: concrete, ceramic, wood, metal, plywood, fiberglass, backer board, tile, dry wall, painted surfaces, MDF, Masonite®, door skin, cabinetry and many other substrates as well.• Lightweight• Flexible• Colorful• Unique stone veneer with unlimited application possibilities.• The introduction of this exciting new material addresses a large need for a flexible, adaptable, durable and weather resistant stone veneer.
Product Features Applications• Architectural• Interior & Exterior• Doors & Cabinets• Furniture• Trim & Backsplashes• Marine & RV• Kitchens• Bathrooms• Flooring • Signage
2’ x 4’ approximately 1 MM to 5 MM thick Stone Veneer Sheets are made from natural stones. This means each sheet will vary the same way that natural slates and micas do. Some colors, like Copper, Terra Red, Multi-Color and Silver Shine are more standard in color but can vary in texture. Indian Autumn, Sanjayani White and Jeera Green can have a wide range of texture and color. These variations also add to the uniqueness of the stones.
BLACKFSV24-01
InDIAn AUTUMnFSV24-05
CoppERFSV24-02
MULTI CoLoRFSV24-07
TERRA REDFSV24-10
SAnJAYAnI WHITEFSV24-08
JEERA GREEnFSV24-06
SILVER SHInEFSV24-09
DARK GREEnFSV24-03
GoLDEnFSV24-04
NEW!
SamplesAdhesive
OR
One tube (10.2 oz.) per 4 sq. ft.
FSV-ADH
FSV-BinderA complete set of all 10 finishes. Each 4” x 6” piece is provided in a clear protective sheet cover inside a hard cover binder.
Loose 4” x 6” pieces ofeach color are available (limit 2).
FLEXIBLE STONE VENEER SHEETS
P-670
PART #WOOD
SPECIES TYPE OF CUTCV28N-CH Cherry FlatCV28N-HC Hickory FlatCV28N-MP Maple FlatCV28N-RO Red Oak Flat
CV28N-WAL Walnut FlatCV28N-WA White Ash FlatCV28N-WB White Birch RotaryCV28N-WO White Oak Flat
PART #WOOD
SPECIES TYPE OF CUTCV48CH Cherry FlatCV48HC Hickory FlatCV48MP Maple FlatCV48RO Red Oak Flat
CV48WAL Walnut FlatCV48WA White Ash FlatCV48WB White Birch RotaryCV48WO White Oak Flat
PART #WOOD
SPECIES TYPE OF CUTCV28N-AM African
Mahogany Flat
CV28N-AM-Q African Mahogany Quarter Figured
CV28N-AMR African Mahogany Ribbon
CV28N-AN Anigre FlatCV28N-AN-QF Anigre Quarter Figured
CV28N-BE Beech FlatCV28N-MBE-H Birdseye
Maple Heavy
CV28N-MBE-M Birdseye Maple Medium
CV28N-BUT Butternut FlatCV28N-CM Curly Maple Flat
CV28N-EBY-Q Ebony QuarterCV28N-KP Knotty Pine Flat
CV28N-PEC Pecan FlatCV28N-RO-RC Red Oak RiftCV28N-SAP-Q Sapeli Quarter
CV28N-TK Teak FlatCV28N-TK-Q Teak QuarterCV28N-WA-Q White Ash Quarter
CV28N-WO-RC White Oak RiftCV28N-ZW Zebrawood Flat
PART #WOOD
SPECIES TYPE OF CUTCV48AM African
Mahogany Flat
CV48AM-Q African Mahogany Quarter Figured
CV48AMR African Mahogany Ribbon
CV48AN Anigre FlatCV48AN-QF Anigre Quarter Figured
CV48BE Beech FlatCV48MBE-H Birdseye
Maple Heavy
CV48MBE-M Birdseye Maple Medium
CV48BUT Butternut FlatCV48CM Curly Maple FlatCV48HM Honduras
Mahogany FlatCV48KP Knotty Pine Flat
CV48PEC Pecan FlatCV48RO-RC Red Oak Rift
CV48TK Teak FlatCV48TK-Q Teak QuarterCV48WA-Q White Ash Quarter
CV48WO-RC White Oak RiftCV48ZW Zebrawood Flat
PART #WOOD
SPECIES TYPE OF CUTCV28CH Cherry FlatCV28HC Hickory FlatCV28MP Maple FlatCV28RO Red Oak Flat
CV28WAL Walnut FlatCV28WA White Ash FlatCV28WB White Birch RotaryCV28WO White Oak Flat
PART #WOOD
SPECIES TYPE OF CUTCV48A-CH Cherry FlatCV48A-HC Hickory FlatCV48A-MP Maple FlatCV48A-RO Red Oak Flat
CV48A-WAL Walnut FlatCV48A-WA White Ash FlatCV48A-WB White Birch RotaryCV48A-WO White Oak Flat
PART #GLUE-SHT
Please Note: Do not apply to sheet rock or drywall. Any exterior surface plastic laminate or melamine board. Apply 2 coats of contact adhesive to porous substrates.
2 Ft. x 8 Ft. Sheets • No Adhesive
4 Ft. x 8 Ft. Sheets • No Adhesive
Other Exotic 2 Ft. x 8 Ft. Sheets • No AdhesiveOther Exotic 4 Ft. x 8 Ft. Sheets • No Adhesive
2 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive
4 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive
• 1/42” THICK GENUINE WOOD VENEER • BOOK MATCHED • SANDED & TENDERIZED• VENEER IS PERMANENTLY BONDED UNDER
HEAT AND PRESSURE TO THE PAPER BACKING.
BOOK MATCHING
Products On This Page Are Book Matched
OPTIONAL GLUE SHEET AVAILABLE:
2 Ft. High Roll x Any Amount Of Running Feet
WOOD VENEER SHEETS- 10 MIL PAPER BACKING
P-671
Wood over wood laminate is composed of two wood veneer faces permanently bonded with the grain of the face running perpendicular to the grain of the back. The result is a dimensionally stable product which minimizes the wood veneer’s tendency to expand and contract across the grain.
• 2 ft. or 4 ft. x 8 ft. sheets• .035 thickness• No bubbling• No ridging• No phenolic or foil backer lines• Flexibility• 100% surface sanded• With or without adhesive
4 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive
2 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive
4 Ft. x 8 Ft. Sheets • No Adhesive
2 Ft. x 8 Ft. Sheets • No Adhesive
Please Note: Do not apply to sheet rock or drywall. Any exterior surface plastic laminate or melamine board. Apply 2 coats of contact adhesive to porous substrates.
FLAT CUT
QUARTER CUT
HALF ROUND
CUT
RIFT CUTROTARY
CUT
Other Types OfVeneer Matches Available
SLIP MATCHING
RANDOM MATCHING
AlsoAvailable
20 Mil
TYPES OF VENEER CUTSThe manner in which veneers are cut is an important factor in producing the various visual effects obtained. Two logs of the same species, but with their veneers cut differently, will have entirely different visual characteristics even though their colors are similar.
PART #WOOD
SPECIES TYPE OF CUTWOW48A-AN-Q Anigre Quartered FiguredWOW48A-AH Ash FlatWOW48A-CH Cherry FlatWOW48A-HM Honduras
Mahogony FlatWOW48A-MP Maple FlatWOW48A-RO Red Oak Flat
WOW48A-WAL Walnut FlatWOW48A-WB White Birch RotaryWOW48A-WO White Oak Flat
PART #WOOD
SPECIES TYPE OF CUTWOW28A-AN-Q Anigre Quartered FiguredWOW28A-AH Ash FlatWOW28A-CH Cherry FlatWOW28A-HM Honduras
Mahogony FlatWOW28A-MP Maple FlatWOW28A-RO Red Oak Flat
WOW28A-WAL Walnut FlatWOW28A-WB White Birch RotaryWOW28A-WO White Oak Flat
PART #WOOD
SPECIES TYPE OF CUTWOW48AN-Q Anigre Quartered FiguredWOW48AH Ash FlatWOW48CH Cherry FlatWOW48HM Honduras
Mahogony FlatWOW48MP Maple FlatWOW48RO Red Oak Flat
WOW48WAL Walnut FlatWOW48WB White Birch RotaryWOW48WO White Oak Flat
PART #WOOD
SPECIES TYPE OF CUTWOW28AN-Q Anigre Quartered FiguredWOW28AH Ash FlatWOW28CH Cherry FlatWOW28HM Honduras
Mahogony FlatWOW28MP Maple FlatWOW28RO Red Oak Flat
WOW28WAL Walnut FlatWOW28WB White Birch RotaryWOW28WO White Oak Flat
WOOD OVER WOOD
P-672
Designed to apply over existing flat panel doors for a new, fresh look without the expense. Skip the time consuming installation and sending old doors to the landfill with this environmentally friendly solution.
Before MirroFlex Door Skin After MirroFlex Door Skin
Basic Finish
Advanced Finish
Textured Finish
How to orDer:Use Part # above plus finish code (ex: MDS3684-Lo)
wenge (w)
Light Cherry (LC) Medium Cherry (MC) Clove Cherry (CC) Light Walnut (LW)
Medium Walnut (MW) Dark walnut (Dw) Medium Oak (MO)
Light Oak (LO) Light Maple (MO) Chestnut Apple (CA) espresso Apple (eA)
36” & 48” Wide x 84” High
Product Feature• Material: Thermoplastic• Peel & Stick Backing• Class A Fire Rated• High Impact and Chemical Resistant• UV Stability• Custom formed 3D door skins are available with a 10 pc. minimum (please inquire).
Don’t send doors to landfills.Remodel them with Door Skins!
MDS3684-* MDS4884-*
MDS3684-* MDS4884-*
MDS3684-* MDS4884-*
MIRROFLEX™ DOOR SKINSNEW!
P-673
Antique Brass
Brushed Steel
LAMINATES ON ONE CONTINUOUS ROLL WITH A SIMPLE PEEL & STICK ADHESIVE
Easy Peel and Stick
H EASY HANDLING H EASY SHIPPING H EASY TO USE H EASY TO CLEAN
Recommended for interior use only.
• It’s essential that a primer (sealer) be applied to the substrate prior to applying the peel & stick laminate.• For larger applications, we strongly recommend testing prior to installing. Samples are available please inquire.
GREAT FOR:RESURFACING, BARS, DISPLAY CASES,
BACK DROPS, AND SO MUCH MORE! Mirrored Finish
1”
Diamond Plate
PRODUCT FEATURES:• 48” wide roll x 100’ long. • Sold by the square foot
(must be purchased in a minimum of 4 sq. ft. increments).
• .03 thick styrene substrate. • PSA backing (Apply to a clean
smooth surface only). • Finishes are scratch & chemical
resistant and come with a peel- back protective coating.
• This material is extremely flexible, which makes it easy to work with and the applications are endless.
• Can be easily cut with a utility knife (Always make cut on decorative side).
4 FT. WIDE ROLL UP TO 100 FT. LONG!!!
Oil Rubbed Bronze
NOW AVAILABLE FROM STOCK: •Mirrored Finish •Brushed Steel •Brushed Copper •Diamond Plate •Engine Turned •Antique Brass •Oil Rubbed Bronze
Brushed Copper
Engine Turned
2”
Roll~A~Lam
PART # DESCRIPTIONRL-0108-MS MIRRORED FINISHEDRL-0113-BS BRUSHED STEELRL-0055-BC BRUSHED COPPER
RL-0311-DP DIAMOND PLATEDiamond Pattern 1” Long
RL-0310-ET ENGINE TURNEDCircle Diameter Approximately 2”
RL-0308-AB ANTIQUE BRASSRL-0423-ORB OIL RUBBED BRONZE
v Free Samples Available v
LAMINATE ON A ROLL WITH ADHESIVE
P-674
Recommendation:If purchasing without adhesive, use a water-based contact cement. Other adhesive products may work but you must first check with the adhesive manufacturer to ensure it is compatible with styrene/PVC. (Core is specified below)
How To Order:• For Non-Adhesive Use Part #- FLS48-30-* Plus Finish Code (ex: FLS48-30-BA)• For Adhesive Use Part #- FLS48A-30-* Plus Finish Code (ex: FLS48A-30-BA)
• Sheets all come with a protective peel off coating.• Cold forms to as small as a 3” radius• Smoothly follows inside and outside radius.• May be fabricated with all traditional
woodworking tools.• Shatterproof and scratch resistant
• Sheets roll for UPS Shipping• Designed for vertical applications;
however, suitable for low traffic horizontal surfaces.
• All sheets must be cut on face (finish) side only.
With Flexlam, you can throw all of your surfacing applications a curve. Ideal for store fixtures, furniture displays, signage, cabinetry and trade show exhibits.
Muted Gold (MG)
Mirror Green (MGR) Mirror Blue (MB) Mirror Red (MR)
Brushed Copper (BC)
Mirror Gold (MIRG)
Oil Rubbed Bronze (ORB)Brushed Aluminum (BA)
Mirror (M)
Brushed Nickel (BN)
Copper Fantasy (CF) Moonstone Copper (MC) Bermuda Bronze (BB) Galvanized (GAL)
Travertine (TRA)Crosshatch Silver (CS) Bronze Fantasy (BF) Cracked Copper (CC)
Smoked Pewter (SP)
FLexiBLe TheRmOpLAsTic LAminATe sheeTs4’ W x 8’ h x .030” Thick
Available With & Without Adhesive
Argent finishes have color throughout so scratches are less visible. They are perfect for walls in high traffic areas.
Argent Copper (AC)Argent Silver (AS)Argent Bronze (AB)Argent Gold (AG)
Mirror
sheets are available indifferent thicknesses,
please inquire.Antique Bronze (AnTB)
PATINAS – cLeAR pvc cORe
meTALLics – cLeAR pvc cORe
ARGenTs - dyed pvc cORe WiTh piGmenT
FLEXLAM
NEW!
NEW!
NEW!
NEW!
P-675
carbon Fiber (cARF)
sheet size: 4 ft. x 8 ft. x .030” ThickUnlike conventional perforated metal sheets, structure plastic perforated sheets are totally unique!
• Supplied with clear protective cover on face.• Extremely flexible.• Ease of fabrication - may use razors, knives,
saws...even scissors!
Alignment of hole punches may not be exact within the sheet, due to production process.pROdUcT is inTended FOR decORATive pURpOses OnLy!!! may not be used to cover a piece of pegboard.
peRF-Rd7 design(Shown in Argent Silver)(9/32” dia. holes on 1” centers)
pLeAse nOTe: Finishes as shown are not necessarily true to the actual laminate. We recommend requesting a sample prior to ordering.
peRF-sQ8 design (Shown in Argent Silver)(5/16” squares on 1” center)
engine Turn (eT)Gloss Black (GB) holographic (hO) carbon Weave (cARW)
Washed Oak (WO) Light maple (Lm) Pearwood (PW) Welsh Cherry (WC)
FLexiBLe TheRmOpLAsTic LAminATe sheeTs4’ W x 8’ h x .030” Thick
Available With & Without Adhesive How To Order:
To Order Wood Grains• For Non-Adhesive Use Part #- FLS48-30-* Plus Finish Code (ex: FLS48-30-WC)• For Adhesive Use Part #- FLS48A-30-* Plus Finish Code (ex: FLS48A-30-WC)
To Order Specialty• For Non-Adhesive Use Part #- FLS28-40-* Plus Finish Code (ex: FLS28-40-ET)
• For Adhesive Use Part #- FLS28A-40-* Plus Finish Code (ex: FLS28-40-ET)
1” 9/32”
5/16”1”
Engine Turn
PART # Finish ThicKpeRF-48R-Bs Brushed Stainless .040peRF-48R-As Argent Silver .030peRF-48R-AG Argent Gold .030peRF-48R-Ac Argent Copper .030
PART # Finish ThicKpeRF-48s-Bs Brushed Stainless .040peRF-48s-As Argent Silver .030peRF-48s-AG Argent Gold .030peRF-48s-Ac Argent Copper .030
speciALTy – 2’ x 8’ x .040 ThicK – BLAcK sTyRene cORe
WOOd GRAINS – cLeAR pvc cORe
FLEXLAM
STRUCTURE PLASTIC PERFORATED SHEET
P-676
DiamonD PlatePES48-DP-*
QUaDRoPES48-QUA-*
CaSCaDePES48-CAS-*
WeaVePES48-WEA-*
RanDom lineSPES48-RL-*
moJaVePES48-MOJ-*
CeleStialPES48-CEL-*
SoUtH BeaCHPES48-SOB-*
CHoColate SQUaRePES48-CHO-*
QUilteDPES48-QUI-*
Dome 1PES48-DOME1-*
RiB 2PES48-RIB2-*
SaHaRaPES48-SAH-*
RiB 1PES48-RIB1-*
• Thickness: .030”• Sheetsaresuppliedwithaprotectivepeelcoat.• Mostcanbesuppliedwithapressuresensitiveadhesivebacking-pleaseinquire.• Mustusewaterbasedcontactadhesivesuchas3M#30NFFastbondSeries.
For all finishes, please see page 677.
3D structures are decorated thermoplastic panels that are fused with color for added effect. Many designs feature a unique overlap system that makes installation easy and hides the seams. 3D structures are flexible enough to be rolled for UPS shipping, yet are completely rigid when laminated. They are impact, chemical, abrasion, U.V., and stain resistant and are Class A Fire Rated.
Cascade
WaVationPES48-WAV-**
* *
*
aPPliCationS:Walls • Furniture • Display Fixtures • Wainscoting • Ceilings • Many Other Interior Applications
Sahara
Please specify when ordering vertical (v) or horizontal direction (h)NOTE: Minimums may apply
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
PLASTIC EMBOSSED 4’ x 8’ SHEETS
P-677
HOW TO OrDer:Use Part # above plus finish code (ex: PeS48-DP-WH) CORE FINISHESALL OTHER FINISHES
White Paintable(WH)
Mirror Gold(MIrG)
Brushed Aluminum (BA)
Brushed Copper (BC)
Argent Silver (AS)
Argent Gold(AG)
Argent Copper (AC)
**Galvanized(GAL)
Argent Bronze(AB)
**CopperFantasy (CF)
**Moonstone Copper (MC)
**Cracked Copper (CC)
**Muted Gold(MG)
Oil rubbed Bronze (OrB)
**Brushed Nickel (BN)
**SmokedPewter (SP)
**BronzeFantasy (BF)
**Travertine(TrA)
**Crosshatch Silver (CS)
**Bermuda Bronze (BB)
Mirror (M)
* Not Available
* Not Available
Core finishes available to shipnormally within 3-5 business days.NOTE: All other finishes may have a minimum order requirement and extended lead time. Please inquire.
Argent finishes have color throughout so scratches are less visible. They are perfect for walls in high traffic areas.
**Now available Tuffcote™ on selected finishes. A revolutionary protection shield that offers superior durability and scratch resistance.
Dome 2PES48-DOME2-*
DoGWooDPES48-DOG-*
GoBiPES48-GOBI-*
StRiKePES48-HAM-*
oValSPES48-OV-*
tRiPle tReaD PlatePES48-TTP-*
mini QUaDRoPES48-MQUA-*
mini DomePES48-MD-*
CeltiC WeaVePES48-CW-*
*
• Thickness: .030”• Class A Fire Rated
aPPliCationS:Walls • Furniture • Display Fixtures
• Wainscoting • Ceilings • Many Other Interior Applications
Celtic Weave
Dogwood
Random Lines
**Antique Bronze (ANTB)
NEW! NEW!
NEW!NEW! NEW! NEW!
NEW!
NEW!NEW!
PLASTIC EMBOSSED 4’ x 8’ SHEETS
NEW!
NEW!
NEW! NEW!
P-678
NuMetal™ is real aluminum, stainless steel or copper foils laminated to a phenolic backing (phenolic is layers of impregnated Kraft paper bonded together). NuMetal™ is recommended for all vertical and light duty horizontal applications.
EMbossEd dEsigN
sTANdARd ANd EMbossEd dEsigNs - 4’ x 8’ sheets x .035” ThickbA bb bs Pb PA MiLL
Brushed Aluminum Balloon
brushed AluminumNM48-sTd-bA
brushed brassNM48-sTd-bb
brushed stainlessNM48-sTd-bs
Polished brassNM48-sTd-Pb
Polished AluminumNM48-sTd-PA
Mill AluminumNM48-sTd-MiLL
balloonNM48-EMb-bAL-bA
squareNM48-EMb-sQU-bA
CorrugatedNM48-EMb-CoR-bA
NM48-EMb-CoR-MiLLNM48-EMb-CoR-bs
REEd CoLLECTioN - 4’ x 8’ sheets
Antique Pewter Reeds (.050” Thick)
NM48-EMb-REEd-AP
Antique Copper Reeds (.050” Thick)
NM48-EMb-REEd-AC
brushed Aluminum Reeds(.035” Thick)
NM48-EMb-REEd-bA
brushed stainless Reeds (.035” Thick)
NM48-EMb-REEd-bs
NUMETAL™ HIGH PRESSURE LAMINATENEW!
P-679
REAL sTAiNLEss sTEEL CoLLECTioN - 4’ x 8’ sheets x .050” Thick
MEsH - 4’ x 8’ sheets
Brushed
Black Aluminum Mesh
This collection retains all the properties of stainless steel. it is constructed with anultra thin layer of stainless steel with standard HPL backing and allows standardwoodworking tools to be used in fabrication.
The latest trends arerepresented in thesecombinations of embossed designs and finishes.
Antique Pewter Mesh(.050” Thick)
NM48-MEsH-AP
Antique Copper Mesh(.050” Thick)
NM48-MEsH-AC
brushed Aluminum Mesh (.040” Thick)
NM48-MEsH-bA
brushed stainless steel Mesh(.040” Thick)
NM48-MEsH-bs
black Aluminum Mesh(.040” Thick)
NM48-MEsH-bK
brushedNM48-Rss-bRU
RadialNM48-Rss-RAd
RondoNM48-Rss-RoN
Rondo(Aluminum, .035” Thick)
NM48-ALU-RoN
diamond PlateNM48-Rss-dP
diamond Plate(Aluminum, .035 Thick)
NM48-ALU-dP
NUMETAL™ HIGH PRESSURE LAMINATENEW!
P-680
CoPPER CoLLECTioN - 4’ x 8’ sheets x .050” Thick
UNiQUE ART CoLLECTioN - 4’ x 8’ sheets x .050” Thick
Each copper laminate sheet is protected with a high quality lacquered top coat and comes with clear protective film.
These laminates are hand painted by artists using techniques that allow for repeatability. Unique Art is protected with a high quality lacquer process to ensure durability.
Antique FineHammered
Copper
Unique Art Berlin Melbourne
Matte CopperNM48-CC-MC
Filigran Antique Copper NM48-CC-FAC
Antique Copper oreNM48-CC-ACo
Antique FineHammered Copper
NM48-CC-AFHC
Fine Hammered Copper NM48-CC-FHC
Unique Art berlinNM48-UAC-bERLiN
Unique Art CairoNM48-UAC-CAiRo
Patina onyxNM48-UAC-oNYX
Patina Autumn LeavesNM48-UAC-AUTLEAVEs
Patina EsmeraldaNM48-UAC-EsMERALdA
NUMETAL™ HIGH PRESSURE LAMINATENEW!
P-681
FUsioNTECH - 4’ x 8’ sheets x .032” Thick
FUsioNswiRL - 4’ x 10’ sheets x .032” Thick
FusionTech is a proprietary infused color and coating process on un-backed aluminum. sheets are coated with a highly scratch resistant UV stable coating and then the images are added using the FusionTech infused color process
Fusionswirl is created using a proprietary combination of mechanical etching of aluminum and our FusionTech process. As it plays beautifully with light, themultiple colors in the design make eacha true work of art.
Red Rust
Omicron & Cirrus
ZebranoNM48-FT-ZEbRANo
doradusNM410-Fs-doRAdUs
gAMMANM410-Fs-gAMMA
CiRRUs NM410-Fs-CiRRUs
HELiX NM410-Fs-HELiX
ZETANM410-Fs-ZETA
bird’s Eye MapleNM48-FT-biRMAP
Cathedral CherryNM48-FT-CATCHE
Red RustNM48-FT-REdRUsT
Charcoal wispNM48-FT-CHAwis
FUSIONNEW!
P-682
Lay Kerfkore or Ultralite on a flat surface. Re-move all dust and debris for a clean surface.
Apply glue to black latex paper side. Adhere pre-cut laminate or veneer.
Apply pressure to laminate to adhere.
Trim edges, if necessary.
Step 1 Step 2 Step 3 Step 4
Finished product - now you can shape for desired application.
Final Step
KERFKORE®
• A flexible product that can be formed into curves and redii as small as 3-1/2”.
• It consists of a core of kerfed particle-board, plywood or MDF with a very flex-ible latex impregnated face paper.
• Allows face material of HPL, veneers, metals and other semi-rigit materials.
• Also available in a two-sided product. It is made similar to the single-sided product but has a phenolic impregnated backer sheet on it to allow the user to determine the kerfs.
• An excellent substrate to use where repetitive actions are needed.
• Grooves run in 8 ft direction.
ULTRALITE®
• A flexible, lightweight product that can be formed into curves and radii as small as 3-1/2”.• It is an excellent substrate to use
where hanging, transporting or other weight considerations are important. Weights about 2-3 ounces per square foot.
• It consists of a highdensity non-compubtible foam core with a latex impregnated face paper.
• Ultralite has a Class A fire rated core.• Groves run in 8 ft. direction.
FIRST Laminate Flat ~ Then Shape
PART # THICKNESS SHEETKFK-14S 1/4” 4’ x 8’
single sideKFK-12S 1/2” 4’ x 8’
single sideKFK-34S 3/4” 4’ x 8’
single sideKFK-34D 3/4” 4’ x 8’
double side
PART # THICKNESS SHEETULT-12 1/2” 4’ x 8’
single sideULT-34 3/4” 4’ x 8’
single side
KERFKORE® & ULTRALITE®
P-683
Shape FirSt ~ then LaminateFlexboard• Hardboard face is ready for painting
or laminating.• Face maybe covered with a wide
variety of materials: veneer, laminate, metal, fabric, etc.
• Panels are dimensionally sized to have same thickness.
• Can bend to a 10” radius.
TimberFlex • Smooth 1/8” poplarface that’s ready to
paint, stain or cover with laminate with-out the need for patching and sanding.
• Panels bend uniformly without dips, valleys or hardspots.
• Panels are dimensionally sized to have the same thckness throughout to assure excellent seam hiding characteristics.
• Can bend to a 5” radius.
econoKore• Economical substitute for bending panels.• No sanding or patching required.• Unique 2-ply product that gives you the ability
to form curves with less labor and less cost.• Made of processed MDF core with a high
density overlay.• Can bend to a 6” radius.
ParT # THicKneSS SHeeTFxb-34 3/4” 4’ x 8’
Fxb-34V 3/4” 8’ x 4’
ParT # THicKneSS SHeeTTF-12V 1/2” 8’ x 4’TF-34 3/4” 4’ x 8’
TF-34V 3/4” 8’ x 4’
ParT # THicKneSS SHeeTecK-14V 1/4” 8’ x 4’ecK-38 3/8” 4’ x 8’
ecK-38V 3/8” 8’ x 4’
FLEXBOARD - TIMBERFLEX - ECONOKORE