LAUFENPro A CC BTW SUITE BACK INLET
FEATURESRecommended Use Domestic, hotel and commercial
Weight 47.0 kg
Finish LAUFEN Clean Coat
SPECIFICATIONRim configuration Box rim
Bowl configuration Available in P and S Trap
Set out P Trap: 185mm, S Trap: 110-195mm
Pan fixing Screwed to floor brackets and bedded with sealant
Seat Soft-close matching seat
Flushing 4.5/3 ltr flush, 3.3 Av ltr flush
WELS 4 Star WELS Rating
Standards AS1172.1 and AS 1172.2
CLEANING RECOMMENDATIONSSoapy water or approved bathroom cleaners. This bathroom product should not be cleaned with abrasive materials. Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.
To see the complete LAUFEN range go to www.reece.com.au/bathrooms
16043
010
110-195
185
360
650
835
775
375
~125
page 1 of 6
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 1
WMKA02321
The more stars the more water efficient
WATER RATINGwww.waterrating.gov.au
In accordance with AS/NZS 6400
Licence No. 0137Bathroom Products Australia
4.5 L per full flush / 3 L per half flush
3.3 litres average flush
LAUFENPro A CC BTW SuiTe BACk inleT
Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference
inSTAllATiOn BACk inleT CiSTeRn
Water connection rear, centered
EN
Guarantee/Liability only when assembled by a licensed plumber in accordance with the instructions and local regulations.
Preparation
1 2 3
Assembly procedure
page 2 of 6
LAUFENPro A CC BTW SuiTe BACk inleT
4 5 6
8
08/1
1/12
8.9
946.
2.00
0.00
0.A
KR
A
4,5 L
9
10
Laufen Bathrooms AGWahlenstrasse 46CH-4242 Laufen, Switzerlandwww.laufen.com
litre+ -7
EN
page 3 of 6
LAUFENPro A CC BTW SuiTe BACk inleT
inSTAllATiOn Bend
EN
Adjustable S Trap Bend
265 mm
02
Please check pan set out
X
Ø 8 mm03
Refer to pan installation
01
page 4 of 6
LAUFENPro A CC BTW SuiTe BACk inleT
EN
* Lubricant * Lubricant
2
23
1
185 mm
185 mm
2
11
2
185 mm
185 mm
✔
✔
08
07 08
X
X + 40 mm10 11
1312
0504
14
07
09
06
page 5 of 6
LAUFENPro A CC BTW SuiTe BACk inleT
EN
* Lubricant
3
3
185 mm 1
✔
✔
2
All ribs have to be inside the pipe
15
X✔
16
page 6 of 6