Transcript
Page 1: LED Mini Spotlight - Rotating · 2020-04-30 · easy to change out batteries and bulbs. It uses very little filament and assembles in a snap. The battery carriage holds 1 3V CR2032

0.57 hrs

1 pcs

f

0.30 mm

k

0.40 mm

h

1

4.00 g

d

PrusaMK3/S

Summary

This is a simple, yet very useful design for a all-in-one spotlight. Afterscouring the internet for simple LED spotlight designs we could use toshow off Lego models with simple and easy accessible materials, I cameup with nothing.I created this design to make it easy change the angle of the light andeasy to change out batteries and bulbs. It uses very little filament andassembles in a snap. The battery carriage holds 1 3V CR2032 and the bulbis a 3mm or 5mm LED. Note: if the legs are extra long, you may need totrim them down a bit.

Hobby & Makers > Electronics

stopmotion stage spotlight light lego led fun

electronics cr2032

The only item that needs support is the bulb holder. Print this with thearms on your baseplate and the "nut" top facing up.

gFINN

LED Mini Spotlight -Rotating

VIEW IN BROWSER

updated 30. 4. 2020 | published 30. 4. 2020

Page 2: LED Mini Spotlight - Rotating · 2020-04-30 · easy to change out batteries and bulbs. It uses very little filament and assembles in a snap. The battery carriage holds 1 3V CR2032

Print Files (.gcode) DOWNLOAD ALL FILES

726.9 KB

0.57 hrs f 0.30 mm k 0.40 mm h PLA 4.40 g d PrusaMK3/S

updated 30. 4. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

243.8 KBupdated 30. 4. 2020

145.7 KBupdated 30. 4. 2020

63.6 KBupdated 30. 4. 2020

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

spotlight_i3mk3.gcode

bulb-holder.stl

battery-holder.stl

spotlight-tube.stl

Page 3: LED Mini Spotlight - Rotating · 2020-04-30 · easy to change out batteries and bulbs. It uses very little filament and assembles in a snap. The battery carriage holds 1 3V CR2032

Top Related