Linde Process Plants, Inc.Fabrication Facility
2
Specialists in Modular Fabrication
Modular designminimizes field installation costs.
Fabrication Capabilities Structural Steel
Piping
Assembly
Instrumentation and Electrical
Surface Preparation
Paintings and Coatings
Insulation and Fireproofing
3
Convenient Access to Major InterstatesThe Port of Catoosa is served by many nationwide contract carriers.
LocationCentral location provides the capability to deliver any size modular unit to world markets.
The Linde fabrication facility is in a 2,000-acre industrial park that includes a fully equipped multi-modal transportation center and an ice-free port providing year round shipping to worldwide locations.
4
Total main shop 126,000
Facility Overview
Square FeetGritblast and Paint 21,000Pipe Fabrication 21,000Module Assembly (3 Bays) 63,000Warehouse 21,000
Over 250 employees with 2 fully operational shifts
Structural fabrication 35,000 sq ft
20 acres fenced 10,000 sq ft indoor storage available for weather sensitive inventory.
5
ExperienceLPP has more than forty years of experience serving the industrial gas, natural gas, refining, and petrochemical industries worldwide. We combined the expertise of two former sister companies, The Pro-Quip Corporation and Lotepro Corporation.
Today, LPP maintains the experience and resources to supply our worldwide clients with fabrication solutions to their process plant needs.
The Linde fabrication shop is a state certified testing facility for Linde pipe welders.
6
Transportation Options
Tulsa International Airport Located eight miles from Linde’s fabrication facility
Truck Linde fabrication is located just five miles from I-44 with a direct link to the north and south
Railroad Spur Largest skid loaded to railcar was 10 ft wide x 12 ft high x 80ft long Approximately 30 tons
Fabrication Location to Water Approximately 1 mile from loading wharf Concrete road to loading wharf
Standard ModuleDimensions
20 ft wide x 20 ft high x 90 ft long 250,000 lbs (by barge)
16 ft wide x 16 ft high x 60 ft long 230,000 lbs (by truck)
Typical Module - 14 ft wide x 12 ft high x 45 ft long 100,000 lbs (by truck)
7
CapabilitiesISO 9001 Certified since 1993
Certification provided by World Certification Services
ASME Code Certified Standards
National Board Registry
S-Power Boilers
R-Metallic Repairs / Alterations
U-Pressure Vessels
MaterialCapabilities
Carbon Steel
Chrome Moly
Stainless Steel
Inconel
Aluminum
Monel
Hastelloy
Clad Material
Alonized
8
Fabrication Process for Typical Modular Design
Pictured: Trial Fit of Four Separate Modules
Pictured: Beginning Phase of Module-Skid Fabrication
Structural Phase Hydraulic jacks for up to 400 tons lifting Bolted or welded construction Fabricate to AWS - D1.1 and AWS - D1.6
Crane Capacity East Bay - Two (2) 10-ton bridges w/(2) 5-ton hoists per bridge West Bay - Two (2) 20-ton bridges w/(2) 10-ton hoists per bridge
Piping PhaseMaterial Capabilities Stainless Steel, Carbon Steel, Inconel, Monel, Alonized, Chrome Moly, Aluminum, Hastelloy, Clad Material, and Code Certified
Crane Capacity One (1) 10-ton bridge w/(1) 5-ton hoist One (1) 20-ton bridge w/(1) 5-ton hoist Nine (9) 2-ton jib cranes
Assembly and Electrical Phase Hydraulic jacks for up to 400 tons lifting Modules are fully assembled, wired, and tested within the 63,000 sq ft of the main fabrication shop
Crane Capacity (3) 20-ton bridges w/10-ton hoists (27’ 4” hook height) (2) 20-ton bridges w/20-ton hoists (2) 30-ton bridges w/25-ton and 5-ton hoists with singe trolley (27’ hook height) (1) 20-ton bridge w/5-ton hoist (26’ 6” hook height)
Pictured: Pipe Welder at Work
9
Fabrication Process for Typical Modular Design (Continued)
Pictured: Module leaving the Fabrication Shop
Pictured: Module within Grit Blast Booth
Coatings Phase21,000 square feet under roof Connected to assembly and piping bays Coating available for severe industrial and coastal environments Offsite galvanizing within 2 miles of our facilities Insulation Contractor on site Meets EPA emission standards Climate-controlled: forced-air ventilation and heat
Crane Capacity (2) 20-ton bridges w/(2) 10-ton hoists per bridge
QualityTesting and Inspection Staff Credentials 5-MT Level II (ASNT) 3-PED Certified for PT 5-PT Level II (ASNT) 3-PED Certified for RT Film interpretation 4-AWS-CWI’s 1-Journeyman/Inspector NEC Certified 3-PED Certified for MT 4-RT Film Interpretation Level II (ASNT) 1-Licensed Electrician 1-Licensed Electrical Contractor
Material ControlMaterial Handling Gated material yard Bin location tracking system Packaging for domestic and international shipping
Crane Capacity (2) 20-ton bridges w/(1) 5-ton hoist per bridge
Pictured: Inspectors checking pipe spools for shipment
10
Safety, Health, Environment and Quality (SHEQ) Policy // August 2009 // QHSE Policy LPP (EN), Version 2.0
Dr. Bruno Ziegler Steve Bertone
Prof. Dr. Wolfgang Reitzle Dr. Aldo Belloni Georg Denoke
To achieve this vision, we Linde Process Plants, Inc. are committed to the following:
- Safety, health, care for the environment and quality are a pre-requisite to any business we undertake - We all take a personal responsibility for SHEQ - Managers at all levels demonstrate visible leadership - We apply this policy in our day to day behaviour and decisions- SHEQ is 100% of our behaviour, 100% of the time
We strive to be leading in SHEQ to meet the following objectives:
- Zero incidents- Zero harm to communities in which we do business- Safe, secure and healthy working conditions for all our people and all that work with us- Supplying safe, compliant and environmentally responsible products and services- Prevention of pollution to the environment- Responsible use of natural resources- Research, development and promotion of technologies, products and services that are sustainable with regard to SHEQ- Satisfy customer needs and expectations
We will
- Comply with all applicable legal, regulatory, internal and industry requirements- Pro-actively identify, eliminate or minimize potential sources of harm or risk arising from all our activities- Continuously improve our performance to achieve our objectives- Share our knowledge and experience in safety, health and care for the environment- Show our accountability for our performance by regularly measuring, reviewing and reporting - Require our contractors and partners to manage in line with this policy- Expect our clients and suppliers to cooperate actively in achieving our objectives- Provide training, standards, equipment and support to ensure compliance with this policy- Maintain open communication with our local communities and stakeholders
This policy is a key part of The Linde Group’s overall strategy and is reviewed on a regular basis by The Linde Group executive management board.
At Linde Process Plants, Inc. we use the acronym QHSE, as this is the term used by the majority of our clients.The content of the policy remains the same.
We give our personal commitment to the above policy which shall be fully implemented.
Safety, Health, Environment and Quality (SHEQ) Policy.
At Linde Process Plants, Inc. we do not want to harm people or the environment.
Linde Process Plants, Inc.
Safety is 100%of our behavior,100% of the time
Linde Cryogenics
Cryogenics clients include NASA,Oakridge Laboratories, and major universities within the United States and around the world.
11
Quality Matters
Colorado 450 MMSCFDGas Processing
Mexico (6) 250 MMSCFDGas Processing
Linde Process Plants, Inc., 945 Keystone Avenue, Catoosa, OK 74015Phone 1.918.266.5700, Fax 1.918.379.7840www.LPPUSA.com, [email protected]