Download - LUBCHEM Valve Lubes Equip Catalog
-
Table of Contents
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
1
Revision 1/2003
Lubchem Products Catalog
Valve Lube Sealants ..................................... 2Premium Lubricants ................................... 13Valve Capacity Chart .................................. 17Valve Maintenance Equipment ................... 19Valve Lubrication Fittings............................ 27
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
2
Everlast 1Multi-Purpose Lubricant
Everlast 1 is a biodegradable syntheticlubricant for use in valves carryingaliphatic hydrocarbon liquids and gassesincluding, kerosene, fuel oils, crudedistillates; sweet or sour, water, conden-sate, dilute acids and caustics. It iswaterproof and has excellent resistanceto oxidation and high metal adhesion.Everlast 1 should be used as a hydrocar-bon resistant ball and gate valve lubricant.Everlast 1 is approved by most major valvemanufacturers.
ApplicationsFor use in plug, gate and ball valves.Suitable for use in hydrocarbon gasses.DO NOT use in oxygen service.
Features Water resistant Fully additive treated 100% synthetic High metal adhesion Inhibited for H2S
Physical Properties Consistency, Cone Penetration (D-217)
220-300 Dropping Point, F (D-566)
None Oil Separation, % wt. loss (D-1742)
5 max Oxidation Stability (D-942)
10 max Rust Preventative Test (D-1743)
Pass Temperature Range
-40 to 400F, -40 to 204C Color
Brown Type Oil
Synthetic Corrosive Inhibitor
Imidazoline Derivative EP Additive
Diester Type
Product CodeEV1
Everlast 1 Winter GradeLow Temp Multi-Purpose
Everlast 1 Winter Grade is a low tempsynthetic lubricant for use in valvescarrying aliphatic hydrocarbon liquids andgasses including, kerosene, fuel oils,crude distillates sweet or sour, water,condensate, LPG systems, dilute acidsand caustics. It is waterproof, and hasexcellent resistance to oxidation.
ApplicationsDesigned for low torque valve operation incold environments.For use in gate, plug and ball valves.Suitable for use in hydrocarbon gasses.DO NOT use in oxygen service.
Features Water resistant Fully additive treated High metal adhesion Excellent corrosion resistance Inhibited for H2S
Physical Properties Consistency, Cone Penetration (D-217)
220 to 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max. Oxidation Stability (D-942)
10 max. Rust Preventive Test (D-1743)
pass Temperature Range
Winter Grade -40 to 620oFArctic Grade -70 to 620oF
ColorBrown
Type OilSynthetic
Corrosion InhibitorImidazoline Derivative
EP AdditiveDiester type
Product CodesArctic Grade - EV1AGWinter Grade - EV1WG
Everlast 3High Temp / High Pressure
Everlast 3 is a synthetic lubricant for high-temperature applications in hydrocarbonservice. Everlast 3 is chemically resistantto aliphatic liquids and gasses includinggasoline and kerosene, fuel and lubricatingoils, natural gas and brine water. Everlast3 is effective at temperatures to 500F andis fortified with antirust, anti-wear, andcorrosion inhibitors. The unique additivepackage in Everlast 3 bonds to metalsurfaces reducing the damaging effects ofcorrosion and scale deposition on criticalvalve components.
ApplicationsFor use in plug, gate and ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant Fully additive treated High metal adhesion Inhibited for H2S
Physical Properties Consistency, Cone Penetration (D-217)
220 to 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max Oxidation Stability (D-942)
10 max. Rust Preventative Test (D-1743)
Pass Temperature Range
-10 to 550F Color
Tan Type Oil
Synthetic Corrosive Inhibitor
Imidazoline Derivative EP Additive
Diester Type
Product CodeEV3
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
3
Everlast 3 WG / AGLow Temp / High Pressure
Everlast 3 is a premium lubricant for high-pressure applications in low temperaturehydrocarbon service. Everlast 3 isavailable in both arctic & winter grades. Itis resistant to aliphatic liquids and gassesincluding gasoline and kerosene, fuel andlubricating oils, natural gas and brinewater. Everlast 3 AG is effective totemperatures to -70F and is fortified withantirust, anti-wear, and corrosion inhibi-tors. The unique additive package inEverlast 3 bonds to metal surfacesreducing the damaging effects of corro-sion and scale deposition on critical valvecomponents.
ApplicationsValves in Arctic ClimatesFor use in plug, gate and ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant Fully additive treated High metal adhesion Inhibited for H2S
Physical Properties Consistency, Cone Penetration (D-217)
220 to 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max. Oxidation Stability (D-942)
10 max. Rust Preventive Test (D-1743)
Pass Low Temperature Torque (D-1478)
@ -75F (-60C)start 5200 gm-cm10 minutes 3965 gm-cm60 minutes 4225 gm-cm
Temperature RangeWinter Grade -40 to 620oF
Arctic Grade -70 to 620oF Color
GrayProduct CodeArctic Grade - EV3AGWinter Grade - EV3WG
Everlast 4BGate Valve Lubricant Sealant
EVERLAST 4B is a high performancesynthetic valve Lubricant and sealant forgate valves. The advanced polymers andextreme pressure additives used in thisproduct make it an excellent choice for usein high-pressure valves carrying naturalgas, crude oil, condensate and ethylene.Everlast 4B contains unique solid lubricantadditives that prevent metal to metalcontact under extreme conditions ofpressure and temperature.
PerformanceEverlast 4B is a specialized lubricant forclose tolerance valves and will provideoutstanding lubricity and high adhesion topolished metal surfaces. This greaseprovides corrosion protection and iswater-resistant.
Physical Properties Color
Black Temperature Range
-20 F to 450oF Penetration, 25 Deg. C, WKD, 60 STR.150 - 165 Drop Point, Deg. C
None Oxidation Stability, (D-942),
10 max.
Product CodeEV4B
Everlast 4Hydrocarbon Resistant
Everlast 4 is a biodegradable syntheticlubricant formulated for high chemical andmechanical stability to general hydrocar-bon service. The synthetic polymer oilsused in Everlast 4 make this an excellentall purpose plug valve lubricant andsealant for the oilfield and petrochemicalindustries. Everlast 4 is a blend ofsynthetic oils for use in valves carrying,LPG, LNG, aliphatic hydrocarbon liquidsand gasses including, kerosene, fuel oils,crude distillates; sweet or sour, water,condensate, dilute acids and caustics. It iswaterproof and has excellent resistanceto oxidation and high metal adhesion.
ApplicationsFor use in plug, gate and ball valvesSuitable for use in hydrocarbon liquids andgassesDO NOT use in oxygen service
Features 100% synthetic Water resistant Fully additive treated High metal adhesion Inhibited for H2S
Physical Properties Consistency, Cone Penetration (D-217) 150 to 200 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max. Oxidation Stability (D-942)
10 max. Rust Preventative Test (D-1743)
Pass Temperature Range
-40 to 500F Color
Brown Type Oil
Synthetic Corrosive Inhibitor
Imidazoline Derivative
Product CodeEV4
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
4
Everlast 116Multi-Purpose Valve Lubri-cant
Everlast 116 is a high performancemultipurpose, synthetic valve lubricant andsealant for gate, ball, and plug valves. It isinsoluble in water, hexane, propyleneglycol. The advanced polymers used inthis formulation make it an excellent choicefor valves carrying natural gas, crude oil,condensate and ethylene. Everlast 116 is aspecialized lubricant for close tolerancevalves and will provide outstandinglubricity and high adhesion to polishedmetal surfaces. This grease providescorrosion protection against CO2 and H2Sand is water-resistant.
ApplicationsFor use in gate valves and ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features Fully additive treated 100 % synthetic High metal adhesion Inhibited for H2S and CO2
Physical Properties Color
White Freeze Point
-50C Temperature Range
-40 to 400F Penetration, 25C, wkd, 60 strokes
230 to 240 Drop Point, C
None Oxidation Stability, (D-942)
10 max. Specific Gravity @25C
1.08
Product Code116
Everlast 117EP Valve Lubricant
Everlast 117 is an extreme pressuresynthetic valve lubricant and sealant forgate, ball, and plug valves. Everlast 117 isdesigned for use in close tolerance valvesand will provide outstanding lubricity andreduced operating torque. Extensivelaboratory evaluation has shown Everlast117 to reduce operating torque by up to50%. The additive package in this productprovides excellent antioxidant, extremepressure and anti-wear properties andshould be used where extreme pressuresprevail.
ApplicationsFor use in gate valves, plug and ballvalves.Suitable for use in hydrocarbon gasses,water, CO2 and H2SDO NOT use in oxygen service
Features Fully additive treated 100 % synthetic High metal adhesion Inhibited for H2S and CO2
Physical Properties Color
Yellow to Brown Temperature Range
-50 to 450F Penetration, 25C, wkd, 60 strokes
170 to 180 Drop Point, C
None Oxidation Stability, (D-942)
10 max. Specific Gravity @25C
.98
Product Code117
Everlast 118High Temp Valve Lubricant
Everlast 118 is a high temperature,synthetic valve lubricant and sealant forgate, ball, and plug valves. This product isthermally stable to 600oF. It is a hydrocar-bon resistant lubricant for use in methane,ethylene, propane, crude oil and diesel.This grease provides corrosion protectionagainst CO2 and H2S and is water-resistant.
ApplicationsFor use in high temperature gate valvesand ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features Fully additive treated 100 % synthetic High metal adhesion Inhibited for H2S and CO2
Physical Properties Color
Dark Grey to Black Temperature Range
-40 to 600F Penetration, 25C, wkd, 60 strokes
220 to 230 Drop Point, C
None Oxidation Stability, (D-942)
10 max. Specific Gravity @25C
1.02
Product Code118
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
5
Everlast 146Hydrocarbon Resistant
Everlast 146 is a synthetic lubricantformulated for high chemical and mechani-cal stability to general hydrocarbonservice. The synthetic polymer oils used inEverlast 146 make this an excellent allpurpose gate valve lubricant and sealantfor the oilfield. Everlast 146 is a blend ofsynthetic oils for use in valves carrying,LPG, LNG, aliphatic hydrocarbon liquidsand gasses including, kerosene, fuel oils,crude distillates; sweet or sour, water,condensate, dilute acids and caustics. It iswaterproof and has excellent resistanceto oxidation and high metal adhesion.
ApplicationsFor use in gate valvesSuitable for use in hydrocarbon liquids andgassesDO NOT use in oxygen service
Features 100% synthetic Water resistant Fully additive treated High metal adhesion Inhibited for H2S
Properties Consistency, Cone Penetration (D-217)
220 to 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max. Oxidation Stability (D-942)
10 max. Rust Preventative Test (D-1743)
Pass Temperature Range
-40 to 500F Color
Brown Type Oil
Synthetic Corrosive Inhibitor
Imidazoline Derivative EP Additive
Diester Type
Product Code146
Everlast 620For High Pressure PlugValves
Everlast 620 is a high performance,synthetic valve Lubricant and sealant forball, plug and gate valves. The advancedpolymers and extreme pressure additivesused in this product make it an excellentchoice for use in high-pressure valvescarrying natural gas, crude oil, condensateand ethylene. Everlast 620 contains uniquesolid lubricant additives that prevent metalto metal contact under extreme conditionsof pressure and temperature. This producthas been tested and found to preventgalling at pressures to 20,000 psi.
PerformanceEverlast 620 is a specialized lubricant forclose tolerance valves and will provideoutstanding lubricity and high adhesion topolished metal surfaces. This greaseprovides corrosion protection and iswater-resistant.
Typical Properties Appearance
White Temperature Range
-20 to 450oF Penetration, 25 Deg. C, WKD, 60 STR.150 - 165 Drop Point, Deg. C
None Oxidation Stability (D942),
10 max.
Product Code620
Everlast 1000High Temperature ValveLube
Premium synthetic oils and inorganicthickeners make Everlast 1000 a hightemperature, non-melting lubricant/sealantfor valves in geothermal, petroleumrefineries and natural gas plants. This hightemperature lubricant/sealant is formulatedfor resistance to aliphatic hydrocarbons,including gasoline, kerosene, propane,butane, natural gas, steam, hot oil, diluteacids and caustic solutions. Everlast 1000is an excellent moly/graphite type anti-seize compound and should be used toprotect threaded connections from galling,and wear. Everlast 1000 converts to a dryfilm lubricant at elevated temperatures andwill not harden.
Features Non melting Converts to a solid film lubricant Contains molybdenum disulfide (moly)
Physical Properties Consistency, Cone Penetration (D-217)
200 to 230 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max Flash Point COC, C (F),
243 (470) Fire Point COC, C (F)
307 (585) Density, lb./gal
7.85 Evaporation Loss 10 hours at 210F
(D-972) 0.10 Temperature Range
-20 to 1000F
Product CodeEVK
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
6
Everlast 50-400 High ViscPlug Valve H2S - CO250-400 is a high viscosity valve lubricantsealant that meets Mil-G-6032 GreasePlug Valve, Gasoline & Oil Resistant. 50-400 is designed for use in plug valves as alubricant sealant. 50-400 is resistant toorganic acids, caustic solutions and isinhibited for use in H2S and CO2. Thisproduct has excellent dual resistance towater and aliphatic hydrocarbons such asgasoline, jet fuel, lubricating oils, organiccondensates and mixtures of theseproducts. 50-400 can be used in a widevariety of applications from the wellheadto product pipelines.
ApplicationsFor use in plug valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service.
Features Water insoluble and washout resistant Fully additive treated 100 % synthetic High metal adhesion Inhibited for H2S and CO2
Physical Properties Consistency, Cone Penetration (D-217)
250 - 265 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 Max Oxidation Stability, (D-942)
10 Max Rust Preventive Test (D-1743)
Pass Temperature Range
-15 to 400F Corrosive Inhibitor
Imidazoline Derivative EP Additive
DiesterType
Product Code50400HV
Everlast WRSevere Corrosive Service
Lubricant for use in valves carrying CO2,H2S, NGL, methanol, crude oil, producedwaters, strong acids, natural gas, andfuels, where extreme temperature swingsmay occur. Everlast WR is highly chemicalresistant, has a wide temperature rangeand is fortified with antirust, anti-wear,and corrosion inhibitors. The uniqueadditive package in Everlast WR bonds tometal surfaces reducing wear and thedamaging effects of corrosion due toorganic acid attack.
ApplicationsFor use in plug, gate and ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant Fully additive treated High metal adhesion Inhibited for H2S and CO2
Physical Properties Color
Black Cone Penetration
250 to 270 Dropping Point, 5 (ASTM D-566)
None Water Washout ASTM D-1264) 1hr @105F - 0.1% Rust Preventative Test (ASTM D-1743)Pass Film Stability and Steel Corrosion,
Mil-G-27617D 168 @ 212FNo resinous deposit or corrosion
Temperature Range-70 to 600F
Type OilSynthetic
Product CodeEVWR
Everlast 50-300Low Temperature H2S /CO2Everlast 50-300 is a synthetic valvelubricant/sealant formulated for use inhighly corrosive, low temperature ser-vices. 50-300 should be used in plugvalves and ball valves handling drygasses including natural gas, manufac-tured gas and LP gasses, carbon dioxide,sour crude and gas, salt water, hydrocar-bons, acids or caustic solutions. 50-300is a tenacious filmer to metal surfaces andwill protect valve parts from the corrosiveeffects of oil and gas production andprocessing. 50-300 is excellent body fillerin gate valves where hydrocarbonresistance is important and corrosionprotection is critical.
ApplicationsFor use in plug, ball and gate valves in lowtemperature environments.Suitable for use in hydrocarbon gasses.DO NOT use in oxygen service.
Features Outstanding low temp performance Water insoluble and washout resistant Fully additive treated 100 % synthetic High metal adhesion Excellent corrosion resistance
Physical Properties Consistency, Cone Penetration (D-217)
220 to 260 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss, (D-1742)
5 max Oxidation Stability, (D-942)
10 max Rust Prevention, (D-1743)
Pass Temperature Range
-50 to 300F Color
Dark Gray Corrosion Inhibitor
Imidazoline Derivative EP Additive
Diester Type
Product Code50300
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
7
Everlast 50-400H2S & CO2 Ball & Gate Valve
50-400 is a dual-purpose valve lubricant/sealant that meets Mil-G-6032 GreasePlug Valve, Gasoline & Oil Resistant. 50-400 is designed for use in plug valves as asealant and in ball and gate valves as alubricant. 50-400 is resistant to organicacids, caustic solutions and is inhibited foruse in H2S and/or CO2. This product hasexcellent dual resistance to water andpetroleum products such as gasoline, jetfuel, lubricating oils and mixtures of theseproducts. 50-400 can be used in a widevariety of applications from the wellheadto product pipelines.
ApplicationsFor use in plug, ball and gate valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service.
Features Water insoluble and washout resistant Fully additive treated 100 % synthetic High metal adhesion Excellent corrosion resistance Inhibited for H2S and CO2
Physical Properties Consistency, Cone Penetration (D-217)
250 - 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 Max Oxidation Stability, (D-942)
2 @ 100 hours Rust Preventive Test (D-1743)
Pass Temperature Range
-40 to 400F Corrosive Inhibitor
Imidazoline Derivative EP Additive
Diester Type
Product Code50400
102 Special Peanut ButterType - Standard & Creamy
Recommended for properly sealing WKMtype gate valves handling water, gas andcondensate, oil petroleum products suchas gasoline, butane, hydrocarbon vapors,ammonia, glycerin, solvents and sour gas.102 Special is available in creamy andstandard grades.
Physical Properties Appearance
Light brown with a characteristic odor Density
9.35 9.55 lb. / gal. Oil Separation
will not occur Corrosion Inhibitor
Imidazoline EP Additive
Diester type Temperature Range
-30 to + 250F
Availability102 Special is available in creamy andstandard grades please specify yourchoice when ordering.
Product CodeStandard Grade - SVDCreamy Grade - SVC
196 Sealant - For McEvoyValves Regular Grade
196 Special should be used in bothreservoirs in McEvoy gate valves to insuresealing, dependability and easy operation.Recommended for properly sealing valvesthat handle gas and condensate, oils,butane, gasoline, ammonia, glycerin andsour gas. Use Lubchem 196 Sealant forleak proof trouble free service in McEvoy,WKM and other gate valves. Recom-mended temperature range -30F to +250F
Physical Properties Appearance
Tan with a characteristic odor Density
9.35 9.55 lb. / gal. Oil Separation
Will not occur Corrosion Inhibitor
Imidazoline EP Additive
Diester type
Product CodeM196
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
8
Formasil HD - Valve Sealant
Synthetic sealant for use in valvescarrying natural gas, crude oil sweet orsour, water, condensate, dilute acids andcaustics. It is waterproof and hasexcellent resistance to oxidation and highmetal adhesion. Formasil HD should beused as a hydrocarbon resistant ball andgate valve sealant or as a plug valvelubricant/sealant.
ApplicationsFor use in plug, gate and ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant High metal adhesion Inhibited for H2S Temperature Range -40 to 400F
Product CodeFHD
Formasil H2O - Valve Sealant
For high-pressure gate valve applicationsin hydrocarbon service. Formasil H2O ischemically resistant to aliphatic liquids andgasses including gasoline and kerosene,fuel and lubricating oils, natural gas andbrine water. Formasil H2O is effective attemperatures to 400F and is fortified withantirust, anti-wear, and corrosion inhibi-tors.
ApplicationsFor use in plug, gate and ball valvesDrilling choke manifoldsHigh Pressure Gate ValvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant Inhibited for H2S Excellent sealing capabilities Temperature Range 0 to 400 F
Product CodeFH2O
Formasil WR - Valve Sealant
For use in valves carrying hot air, steam,CO2, H2S, NGL, methanol, crude oil,produced waters, strong acids, naturalgas, and fuels, where extreme tempera-ture swings may occur. Formasil WR ishighly chemical resistant, has a widetemperature range and is fortified withantirust, anti-wear, and corrosion inhibi-tors.
ApplicationsValves in Arctic ClimatesFor use in plug, gate and ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant High metal adhesion Inhibited for H2S Temperature Range -55 to 450F
Product CodeFWR
Formasil RG - Valve Sealant
Formasil RG is a general purpose syntheticsealant for use in valves carrying naturalgas, crude oil sweet or sour, water,condensate, dilute acids and caustics. Itis waterproof and has excellent resis-tance to oxidation and high metal adhesion.Formasil RG should be used as a hydro-carbon resistant ball and gate valvesealant or as a plug valve lubricant/sealant.
ApplicationsFor use in plug, gate and ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant High metal adhesion Inhibited for H2S Temperature Range -40 to 400F
Product CodeFRG
Formasil RS - Valve Sealant
Synthetic sealant for use in valvescarrying natural gas, crude oil sweet orsour, and water. It is waterproof and hasexcellent resistance to oxidation and highmetal adhesion. Formasil RS should beused as an emergency sealant in ball andgate valves or as a plug valve lubricantsealant.
ApplicationsFor use in plug, gate and ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant High metal adhesion Excellent corrosion resistance Inhibited for H2S Temperature Range 0 to 400F
Product CodeFRS
Formasil RS Winter GradeSealant
Formasil RS Arctic is a low temperature,synthetic sealant for use in valvescarrying natural gas, crude oil sweet orsour, and water. It is waterproof and hasexcellent resistance to oxidation and highmetal adhesion. Formasil RS Arctic shouldbe used as an emergency sealant in balland gate valves or as a plug valvelubricant/sealant.
ApplicationsFor use in plug, gate and ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant Inhibited for H2S Temperature Range -40 to 400F
Product CodeARS
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
9
TFE SealValve Stem Packing
A pumpable packing and sealant containinghigh temperature proprietary fillers in ablend of synthetic oils. Recommended foruse in high temperature hydrocarbonservice, steam, and hot oil services. TFESeal #1 contains fine to medium size fillerparticles. TFE Seal #2 contains medium tolarge filler particles.
Principle Service High chemical and mechanical stability Good lubricity High temperature fillers EP Additives Oxidation and corrosion inhibitors
ApplicationPumpable with high pressure grease gun.Do not use in oxygen service.Temperature Range 0 to 250FColor - Brown
Product Codes1900
Formasil CO2 - Winter Grade
Synthetic valve sealants formulated foruse in highly corrosive, low temperatureservices. This product should be used toseal leaking plug valves and ball valveshandling carbon dioxide, sour crude andgas, salt water, hydrocarbons, acids orcaustic solutions.
ApplicationsFor use in plug, ball and gate valves in lowtemperature environments.Suitable for use in hydrocarbon gasses.DO NOT use in oxygen service.
Features Outstanding low temp performance 100% synthetic High metal adhesion Excellent sealing capabilities Inhibited for H2S Temperature Range -40 to 500F
Product CodeFSCW
Formasil CO2- Sealant
Valve lubricant/sealant that meets Mil-G-6032 Grease Plug Valve, Gasoline & OilResistant. Formasil CO2 is designed foruse in gate valves as a lubricant/sealantand in ball and plug valves as a sealant.Formasil CO2 is resistant to acids, causticsolutions and is inhibited for use in H2Sand/or CO2. This product has excellentdual resistance to water and petroleumproducts such as gasoline, jet fuel,lubricating oils and mixtures of theseproducts. Formasil CO2 can be used in awide variety of applications from thewellhead to pipelines.
Features Water insoluble and washout resistant 100% synthetic Inhibited for H2S and CO2 Temperature Range 15 to 400 F
Product CodeFCO2
Lunaseal 1Valve Stem Packing
Lunaseal is a unique pumpable packingand sealant compound containing millionsof micron size fillers and graphite fibers.Lunaseal packing is formulated forhydrocarbon service in low temperatureapplications and is resistant to acid andcaustic solutions, steam and mostchemicals.
ApplicationPumpable with high pressure (10,000 PSI)grease gun.Do not use in oxygen service.Temperature Range -65 + 500FColor - Gray to Black
Product Code1300
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
10
Lubchem V-CleanLiquid Valve Cleaner
Lubchem V-Clean is a complex blend ofsurfactants, dispersants and wettingagents designed to thoroughly cleanclogged sealant pathways in ball, plug andgate valves. V-Clean will lift deposits ofoils, greases (hydrocarbon & synthetic),salts, asphaltines, paraffin, and other soliddebris (including corrosion products) fromthe surface of the metal. V-Clean willdisplace water and hold the debris insuspension allowing it to be flushed fromthe system using a Lubchem V-Clean FlushPump or other suitable pumping equipment.
Application GuidelinesV-Clean should be used as supplied, nodilution is necessary. V-Clean should bepumped into the valve at a rate sufficientto force the liquid into contact with theentire surfaces to be cleaned. The volumeof V-Clean required per cleaning job variesdepending upon valve condition and size.However, to estimate chemical require-ments use approximately 1 quart of V-Clean per 4 inches of the diameter of thevalve for plug valves / per seat for ballvalves. For gate valves use a sufficientquantity to fill the valve body and flush theseats when possible. The reaction timefor deposit removal varies by deposit, as ageneral rule allow the product about 15minutes to dissolve the deposit, repeat theprocedure until the desired performance isobtained.
Typical Properties:Color/Odor ................. Amber Liquid / MildFlash Point, F .................................... >200pH .......................................................... 12Solubility:Water ............................................ SolubleOil ............................................ Dispersible
V-Clean is available in:Part Number ............................. PackagingVC21 ...................... 6/1gal. plastic bottlesVC29 ................. 5 gal. pail w/ pour spout
Valve SaverValve Cleaner
Valve Saver is a combination valve cleanerand penetrating lubricant engineered tofree up and clean out difficult or impos-sible to operate lubricated valves.Lubchems Valve Saver penetrates andcleans residual gum, lacquer, hardenedsealants and lubricants. Valve Saver alsopenetrates and loosens rust and corrosiondeposits extending the life and perfor-mance of all types of lubricated valves.When used regularly it will preventadditional build up.
Features Compatible with all valve lubricants Cuts residual gum and lacquer deposits Removes rust and corrosion Do not use in oxygen service Temperature Range -40 to 400oF
Application ProcedureApply Lubchem Valve Saver with conven-tional lubricating equipment. Turn valveslowly and repeat the process until valveopens freely. After the valve is operable,lubricate with one of Lubchems highquality valve lubricants.
Product CodeVSB
Valve Saver AWValve Cleaner / lubricant
Valve Saver AW is a combination valvecleaner and lubricant designed to lubricateand clean deposits common to valves inpipeline & production valves. Valve SaverAW can be used as a valve cleaner andas a lubricant. Valve Saver AW consists ofa premium quality Anhydrous Calcium basegrease, blended with a proprietary additivepackage that includes a dispersant /surfactant. This unique compound willlubricate the valves internal componentsand, at the same time, emulsify a variety oforganic and organometallic compoundscommon to pipeline operations. Whenused regularly it will prevent additionalbuild up of pipeline contaminants. Theanhydrous calcium base grease providesgood lubrication qualities over a widetemperature range of -65 to 250oF.
Valve Saver AW is compatablewith the following elastomers:Polytetrafluoroethylene, Teflon,Perfluoroelastomer, Kalrez, Chemraz, TFE-PVDF-Terpolymer rubber, Viton, Fluorel,Chlorinated Butyl Rubber & ButadieneRubber, Butyl Rubber, Ethylene PropyleneRubber, Ethylene Propylene Diene Rubber,Vistalon, Nordel, Nitrile Rubber, Hycar,Buna-N, Natural Rubber, Butadiene Rubber,Isoprene Rubber, Epichlorohydrin copoly-mer rubber, Epichlorohydrin terpolymerrubber, Polysulfide rubberChlorosulfonated Polyethylene rubber
Features Compatible with all valve lubricants Cuts gum and lacquer deposits Penetrates rust and corrosion Do not use in oxygen service Temperature Range -40 to 400oF
Product CodeVSAW
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
11
Anti-Seize 2200Stem & Thread Compound
Anti-Seize 2200 is a special blend ofgraphite and micro-size aluminum flakeparticles homogenized into a highlyviscous carrier which volatilizes at hightemperatures. It is non-melting andprovides superior protection againstgalling, corrosion and heat freeze. Anti-Seize 2200 prevents metal to metal contactunder severe variations of temperature,cyclic loading and pressure. It withstandshigher temperatures than copper basedcompounds and will not drip or run. It willprovide clean break-outs from high torqueand is very economical to use.
Features Temperature range
-65 to 2200oF-54 to 1204oC
Anti-Seize 2200 is available in:Part No. .................................. Container13111 ................ 24-8 oz. brush top cans13117 ............. 12-16 oz. brush top cans13123 ....................................... 10 lb. pail13135 ........................... 5 gal. / 40 lb. pail
MOLY-VAPDry Moly Thread Compound
Moly-Vap is a dry film lubricant containingMolybdenum Disulfide which will withstandbroad temperature and pressure limits. Drymoly film has a low coefficient of frictionand provides excellent lubricating proper-ties without the attraction of dust and dirtwhere oils and greases would beunsuitable. The carrier solvent in thisformulation drys quickly bonding thetenacious solid Moly-Vap coating toferrous and nonferrous metals. Moly-Vapresists water, oils, alkali and most acids. Itcontains corrosions inhibitors and willprevent corrosion to parts during extendedstorage periods.
FeaturesMoly-Vap prevents friction, fretting, wear,sticking, galling, seizing, binding andchattering.
Moly-Vap is available in thesesizes:Part No. ................................... Container15112 ....... 12 oz. aerosol / 12 per case15119 .............. 4 - 1 gal. Cans per case15145 ..................................... 5 gal. Can
-
Ordering Information
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
12
Lubchem valve lube sealants are available inindustry standard stick and bulk packagingas follows:
102 Sealant & 196 Sealant - are available in bulk packagingonly.Everlast Products - are available in both stick and bulk packag-ing.Formasil Products - are available in bulk packaging only.
Ordering InstructionsProduct Selection & Part Number Identification:
Lubchem valve lube sealants are identified by individual productcodes. The product code for each product is listed in thiscatalog at the bottom of the each products description. Whenyou have selected a product make note of the product code.
Lube Sealant Packaging Selection:
Now that you have selected a product, select the packagingoption from the tables below and add the package code to theend of the product code. For example, Everlast 4 packaged inone 40 pound pail would be part number EV440.
Package Sticks per Code inches mm inches mm Box / Carton
A 1/ 4 6.35 1 1/ 2 38.1 48B 3/ 8 9.53 1 1/ 2 38.1 24C 7/ 16 11.11 2 1/ 8 53.98 24D 1/ 2 12.7 2 5/ 8 66.68 24G 5/ 8 15.88 3 1/ 2 88.9 24J 1 3/ 8 34.93 8 1/ 2 215.9 16K 1 1/ 2 38.1 10 1/ 2 266.7 12
Diameter LengthStick Size
Stick Lube Sealant Packaging OptionsPackage Container Recommended
Code Size PumpC10 16 ea. 10oz. Cartridges 1000 Lube PumpC14 10 ea. 14oz Cartridges 1200 or 1500 Lube Pump10 10 lb. Pail Force Flow 100 or 5040 40 lb. Pail FF100, 35-50 or 45-100120 120 lb. Drum C-1207786 Drum Pump130 130 lb. Drum C-1207786 Drum Pump420 55 Gal. 420 lb. Drum C-55-7786 Drum Pump510 55 Gal. 510 lb. Drum C-55-7786 Drum Pump
Bulk Lube Sealant Packaging Options
-
Lubchem Premium Lubricants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
13
Longlife 1600 AArctic Grade Lubricant
Suitable for use as a low temp gate valvebody filler or as a ball valve lubricant.Longlife 1600 is a low temperaturemultipurpose water insoluble grease thatwill provide low torque operation in verycold operating environments. It containsa proprietary anti-galling additive andcorrosion inhibitor designed to protectseat rings, springs and sealing surfacesfrom the corrosive effects of oil and gasproduction and processing.
ApplicationsFor use in ball and gate valves in lowtemperature environments.Suitable for use in hydrocarbon gasses.DO NOT use in oxygen service.
Features Outstanding low temp performance. Water insoluble and washout resistant. Fully additive treated. Premium quality lithium 12-hydroxy
stearate grease. Superior protection to lubricate a wide
variety of heavy-duty equipment. Low Staining
Physical Properties NLGI No.2 Thickener Anhydrous Calcium Temperature Range
-75 F to 350 F Color/Texture
Gray/Smooth Adhesive Rust Prevention, D-1743, rating
Pass Worked 60 Penetration, D-217
265-295 Dropping Point, D-566 F
365 Oil Separation, D-1742,
% loss 5 Timken OK Load, D-2509, lb
45 Four-Ball Wear, D-2266, mm
0.56 Four-Ball EP Weld Point, D-2596,
kgf, 315
Product CodeBPA
Longlife 1600Multi-Purpose Lubricant
Premium 12-hydroxy stearate com-pounded with a premium additive systemmakes this an excellent multipurposegrease with a broad temperature range.This product is water insoluble, washoutresistant and fully additive treated withcorrosion inhibitors, extreme pressureadditives and oxidation inhibitor addi-tives. It is an excellent choice wherewater resistance and a light valve greaseis recommended.
ApplicationsFor use in Ball Valves & Gate Valves asa body filler.Protects seat rings and springs.Suitable for use in water and naturalgas services.DO NOT use in oxygen service.
Features Water insoluble and washout resis-tant. Fully additive treated. Premium quality lithium 12-hydroxy
stearate multipurpose grease. Superior protection to lubricate a wide
variety of heavy-duty equipment.
Physical Properties NLGI No.2 Temperature Range
5 to 350 F Color/Texture
Tan/Smooth Worked 60 Penetration, D-217
265-295 Timken OK Load, D-2509, lb.
45 Four-Ball Wear, D-2266, mm
0.40 Four-Ball Weld Point, D-2596, kgf
250
Product CodeLL16
Longlife 1603 - Multi-PurposeLubricant
Longlife 1603 is an economical multipur-pose grease especially suited for normaloperating temperatures and othernoncritical service applications. 1603 isan excellent corrosion inhibiting greaseand recommended for applicationsrequiring frequent re-greasing due tocontaminating environments. Thisproduct is water insoluble, washoutresistant and fully additive treated withcorrosion inhibitors, extreme pressureadditives and oxidation inhibitor addi-tives. It is an excellent choice where aneconomical valve grease is recom-mended.
ApplicationsFor use in Ball Valves & Gate Valves asa body fillerProtects seat rings and springsSuitable for use in water and cleannatural gas servicesDO NOT use in oxygen service.
Features Water resistant Fully additive treated Multipurpose grease
Physical Properties NLGI No.2 Temperature Range
0 to 265 F Color/Texture
Dark Brown Worked 60 Penetration, D-217
265-295 Dropping Point, D-566 F, (C)
375 (191) Texture
Smooth, medium fiber
Product CodeLL1603
-
Lubchem Premium Lubricants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
14
LZ-11Silicone Lubricant
LZ-11 is a highly purified siliconelubricant that resists deterioration bychlorides, solvents, acids, low-pressuresteam, and condensate. LZ-11 isdesigned for use on plug valves, gatevalves butterfly valves, swivel joints,mechanical seals and packing, andflexible ball joints exposed to harshchemical environments. It is also anexcellent lubricant for rubber and plastico-rings, sealing vacuum and pressuresystems.
ApplicationsFor use in plug, gate and ball valvesSuitable for use in hydrocarbon gasses.Mechanical seals and packingFlexible ball jointsO-rings and seals
Physical Properties Consistency, Cone Penetration (D-217)
220 to 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max. Oxidation Stability (D-942)
10 max. Rust Preventive Test (D-1743) rating
Pass Low Temperature Torque (D-1478)
@ -75F (-60C)start 5200 gm-cm10 minutes 3965 gm-cm60 minutes 4225 gm-cm
Flash Point610F
Temperature Range-40 to 400F
ColorClear White
Type OilSilicone
Product CodeLZ11
Longlife Moly LTHeavy Duty Moly Lubricant
Longlife Moly LT - EP Grease is a fullyadditive-treated, multipurpose greasethat is water insoluble and treated forextra protection. It contains antirust, anti-wear, extreme pressure, and antioxidantadditives. It is a good quality molybde-num disulfide compounded low tempera-ture grease, also treated with solublechemical additives to prevent wear,especially under very highly loadedconditions. Use Longlife Moly LT in lowtemperature applications where mediumto severe conditions prevail.
FeaturesWater insoluble and washout resistantFully additive treatedExcellent low temperature performance
Physical Properties NLGI No.2 Thickener
Anhydrous Calcium Texture
Smooth, but slight fiber Color, Observed
Gray Worked 60 Penetration, D-217
265-295 Dropping Point, D-566, F. (C.)
285 (140) Wheel Bearing Leakage, D-1263, rating
Pass Oil Separation, D-1742,
% loss 5 Timken OK Load, D-2509, lb.
45 Rust Prevention, D-1743, rating
Pass Oxidation Stability, (D-942) psi drop
4.0 at 100 hr. Approximate Temperature Range,
-65oF to 280oF
Product CodeLMLT
Longlife MolyHeavy Duty Moly Lubricant
Longlife Moly - 3% Moly-Lithium. EPGrease is a fully additive-treated,multipurpose grease is water insolubleand is treated for extra protection. Itcontains antirust anti-wear, extremepressure, and antioxidant additives. It isa good quality molybdenum disulfidecompounded multipurpose grease, alsotreated with soluble chemical additives toprevent wear, especially under veryhighly loaded conditions. Use LonglifeMoly in general purpose applicationswhere medium to severe conditionsprevail. Meets Caterpillar requirementsfor 3% molybdenum disulfide, lithiumsoap grease.
FeaturesWater insoluble.Fully additive treated.Meets Caterpillar requirements for 3%molybdenum disulfide, lithium soapgrease.
Physical Properties NLGI No.2 Thickener
Lithium Stearate Texture
Smooth, but slight fiber Fillers
3% Molybdenum disulfide Color, Observed
Grey Worked 60 Penetration, D-217
265-295 Dropping Point, D-566, F. (C.)
340 (171) Wheel Bearing Leakage, D-1263,
Pass Oil Separation, D-1742,
% loss 3.8 Rust Prevention, D-1743, rating
Pass Oxidation Stability, (D-942) psi drop
5.0 at 100 hr. Temperature Range
-5oF to 280oF
Product CodeLLM
-
Lubchem Premium Lubricants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
15
Longlife SRL-50Sucker Rod Lubricant
Longlife SRL-50 is engineered to protectthe threads of sucker rod connectionsunder severe operating conditions ofhigh cyclic loading. SRL-50 is a hightemperature, lithium complex EP greasewith excellent low temperature proper-ties. SRL-50 is a unique blend ofpetroleum base oils and synthetic fluidsproviding excellent resistance to oxida-tion at elevated temperatures withexceptional performance under extremelow temperature conditions. SRL-50contains EP/antiwear additives, rust andoxidation inhibitors that provide superiorprotection form thread galling in suckerrod connections.
Application:Clean the connection prior to make up.Apply a thin coat of SRL-50 to thethread. CAUTION: Do not lubricate thepin shoulder face or the couplingshoulder face or a loss of tightness canoccur resulting in a connection failure.
Physical Properties: NLGI
No.2 Color/Texture
Blue/Smooth Unworked Penetration, D-217
265-295 Worked 60 Penetration, D-217
265-295 Oxidation Stability, (D-942) psi drop
2.5 @ 100 hr. Oil Separation, D-1742, % loss
1.0 Timken OK Load, D-2509, lb.
70 Four-Ball Wear, D-2266, mm
0.45 Four-Ball Weld Point, D-2596, kgf
315 Dropping Point, (D-2265), F, (C)
550 (288) Temperature Range, F, (C)
-65oF to 356oF, (-54 to 180)
Product CodeSRL50
Longlife 1200Synthetic Hydrocarbon Grease
Longlife 1200 is a multipurpose syntheticgrease developed for high speed turbineengine bearings and conforms to Mil-G-81322E. It has excellent long life andantirust properties for service tempera-tures ranging from -80oF to 400oF. It canbe operated to 600oF, depending uponspeed and load, environmental factors,and relubrication frequency.
Application:Longlife 1200 is highly recommended foruse in a wide range of industrial equip-ment. Use on sheathed cables, O-rings,seals, gears, ball, roller, and plainspherical bearings. It is especiallysuitable for use in plastic and/or metalgearboxes where service temperaturerange and minimal evaporative lossesare critical.
Physical Properties: NLGI:
No.2 Color/Texture:
Tan/Smooth Unworked Penetration, D-1403:
270 Worked 60 Penetration, D-1403:
285 Worked Stability, FED-STD-791,
Method 313 @ 100,000 strokes:310
Oxidation Stability, (D-942) psi drop:100 hr. @ 212oF, -2.5 psi500 hr. @ 212oF, -9.0 psi
Oil Separation, FED-STD-791,Method 321:30 hr.@ 212oF, 0.80%30 hr.@ 350oF, 3.50%
Dropping Point, (D-2265), F, (C)550 (288)
Evaporation, D-2595:22 hr. @ 210oF, 0.50%22 hr. @ 350oF, 5.40%
Dirt Count, FED-STD-791, Method3005:10-75 microns, 65/ccover 75 microns, 0/cc
Rubber Swell, FED-STD-791, Method3603, L stock 168 hrs. @ 158oF:4.0%
Rust Preventive Properties D-1743, 48hrs. @ 125oF:1
Longlife 1200 (cont.)
Load Wear Index, ASTM D-2596,@ 77oF: 48.0Last Non-seizure, (Load / Wear Scar):100kg/0.454 mm7Last Seizure (Load / Wear Scar):126kg/2.590 mmWeld Point (Load):250 kg
Steel-on-Steel Wear, ASTM D-2266,(52100 steel),1200 rpm, 40 kg, 2 hrs. @ 167oF:0.7 mm1200 RPM, 40 kg, 2 hrs. @ 350oF:0.8 mm
Coefficient of Friction, 1200 RPM, 90oF,15 kg load:0.09
Gear Wear, FED-STD-791, Method 335,1000 cycles:5 lb load, 0.68 mg10 Lb load, 1.60 mg
High Temp. Performance,ASTM D-3336:300o F, 10,000 rpm, 50 lb, 2,500 hrs +350o F, 10,000 rpm, 50 lb, 525 hrs350o F, 10,000 rpm, 5 lb, 1,000 hrs +400o F, 10,000 rpm, 50 lb, 264 hrs
Low Temperature Torque,ASTM D-1478:@ -65oF, starting, 1,534 g-cmrunning, 649 g-cm
Corrosion on Copper:24 hrs @ 212oF, 1a no stain
Product CodeLL1200
-
Lubchem Premium Lubricants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
16
Ordering InstructionsProduct Selection & Part NumberIdentification:
Lubchem premium lubricants areidentified by individual product codes.The product code for each product islisted in this catalog at the bottom of theeach products description. When youhave selected a product make note ofthe product code.
Lubricant Packaging Selection:
Now that you have selected a product,select the packaging option from thetables below and add the package codeto the end of the product code. Forexample SRL-50 packaged in one 40pound pail would be part numberSRL5040.
Package Code ContainerA 12 ea. 14 oz. Aerosol Cans
C10 16 ea. 10oz. CartridgesC14 10 ea. 14oz Cartridges10 10 lb. Pail104 4 ea. 10 lb. Pails40 40 lb. Pail120 120 lb. Drum420 55 Gal. 420 lb. Drum
Lubricant Packaging Options
Longlife 1607High-Temp Multi-Purpose
Longlife 1607 is a multi-purpose syntheticgrease combined with a dropping point of550oF for application over a wide tempera-ture range. Longlife 1607 grease exhibitsa Tmiken OK Load in excess of 80 poundsand excellent Four-Ball Wear and EPperformance. This product will providesuperior protection to lubricate a widevariety of automotive, trucking, mining,construction and industrial equipment withexcellent performance in severe applica-tions and unequaled shock load protection.
Application:Longlife 1607 is highly recommended fordisk brake wheel bearings, fan hubs,backhoe hinge pins, oven conveyorbearings and other heavily loaded and/orhigh speed industrial application.
Physical Properties: NLGI:
No.2 Color/Stringy:
Red/Smooth Worked 60 Penetration, (D-217):
265-295 Oxidation Stability, (D-942) psi drop:
2 psi @ 100 hours Oil Separation, (D-1742):
% loss - less than 1 Dropping Point, (D-2265), F, (C):
550 (288) Rust Preventive Properties (D-1743):
Pass Copper Corrosion, (D-4048), rating:
Pass Timken OK Load, (D-2509):
80 lb. Four-Ball Wear, (D-2266), mm:
0.45 Four-Ball Weld Point, (D-2596), kgf:
315 Four-Ball Load Wear Index, (D-2596) kgf
50 Four-Ball Last Nonseizure, (D-2596) kgf
80 Temperature Range, F (C)
-10 to 325 (-23 to 163)
Product CodeLL1607
-
Valve Capacity Chart
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
17
The capacities listed in this chart are based upon the valve manufacturers recommendation for thequantity of sealant required per seat. For more information please consult the valve manufacturersmaintenance manual or your local Lubchem representative.
Size Grove Nordstrom KF Series FA KF Series T
1/23/41
1 1/223468
101214161820222426283032343638404248
----2234569
101118202223262730-
3342-
6567102
-------33444558
101012131414151616181822
1/21/211345911141732405672808896-
112-------
----1112457----------------
---112227
10182134--------------
Cameron
Inside Diameter Ounce Per Foot1/4" 0.53/8" 1.31/2" 2.03/4" 4.0
Riser Extension Capacitys
Valve LubricationFitting Thread
Gauge
1
3/4
1/2
3/8
1/4
1/8
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
18
-
Air Operated Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
19
V-CLEAN FLUSH PUMPThe only way to clean a valve!The V-Clean flush pump is designed to provide the pressureand volume needed to properly flush the sealant and lubri-cant passages of any lubricated valve, regardless of size oroperating pressure, and is available in the following configu-rations.
DELIVERY HOSE SOLD SEPERATELY
Features Pumps in both directions with four acting check valves. Easily removable air valves. 2.5 stroke for longer pump life. Faster than hand operated flush pumps. Efficient yet simple design for hassle free maintenance Can not stall. Special coating to prevent oxidation of aluminum parts and
galling of stainless parts. All wetted parts are 316SS
.ONTRAPERUSSERP
GNITAR)MPG(YREVILED
K2CV ISP0002 2
K3CV ISP0003 52.1
K5CV ISP0005 96.
K8CV ISP0008 4.
K01CV ISP000,01 32.
K02CV ISP000,02 11.
-
Air
Ope
rate
d Lu
bric
atio
n Eq
uipm
ent
PO
Box
262
6, 2
3609
W. H
ardy
Rd.
, Spr
ing,
Tex
as 7
7383
, Ord
er 8
00-9
29-0
244,
Fax
281
-288
-084
9
For a
dditi
onal
info
rmat
ion
or a
ssis
tanc
e pl
ease
con
tact
you
r loc
al L
ubch
em re
pres
enta
tive.
20
V-CLEAN FLUSH PUMP.ONMETI .YTQ .ONTRAP NOITPIRCSED LAIRETAM
1 1 47857AY KNAT SS613
2 1 27857AY TEKSAGPMUP KROC
3 1 07857AY .YSSAPMUPNAELC-V MUNIMUMA
4 2 37857AY TEKCARBPMUP SS613
5 1 00801PM REHTAERBRETLIF LEETS
6 1 00001PM EGAUGLEVELTHGIS MUNIMULA
7 1 01645ND EVLAVLLABTPN"2/1 SSARB
8 1 599800F RENIARTSNOITCUS03-2/1-3P LEETS
9 1 196031F ELPPINCNIZ5.4XPM8-RTS-S LEETS
01 1 576131F DAEHQSPM8-S-ULP-S SS613
11 41 49906HY 613-HH-00.1-X-CNU-61-573. SS613
21 3 17806HY 613-HH-52.-X-CNU-42-01 SS613
31 21 29906HY 613-HH-5.-X-CNU-61-573. SS613
41 1 987331F SM6-PF8-RTS-S SS613
51 62 64286HY REHSAW-KL-613-573. SS613
61 41 09176HY TUN-613-GR-CNU-61-573. SS613
71 1 510021F RELPUOC-PF8-RTS-D SS613
81 1 57857AY TEKSAGDILKNAT KROC
-
Air Operated Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
21
Twin Pneumatic Cylinders Dimensions: 22x22x33 inches Approximate Wt: 50 lbs. For use with 5 qt. / 10 lb. pail. Delivery 1/4 ounce per stroke Maximum air inlet 100 psi
Force Flow 50
Force Flow 100
Lubchem Force Flow Lube PumpsLubchem Force Flow grease pumps are reliable, heavy duty air operated pumps. Each pump is equipped with100:1 ratio air motor that is capable of 10,000 psi discharge pressures. Discharge pressure may be adjusted byregulating the inlet air pressure to the pump through the air inlet regulator.
Force Flow pumps are equipped with twin cylinders that provide continuous contact between the follower plate andthe sealant providing a continuous prime to the pump. The positive pressure applied by the pressure primingsystem prevents pump cavitation and makes it possible to pump highly viscous sealants at low temperatures.
Force Flow 100 Features Total Force Flow weight = 100 lb. High volume delivery is 1/2 ounce per stroke. Five inch air motor, 100:1 ratio. For use with 40 lb. and 5 qt. cans. Moisture trap & air inlet regulator included. Durable light weight design. Air inlet gauge and discharge pressure gauge included. Permanently lubricated pneumatic rams. Pumps 5 lb. per minute of NLGI # 2 grease. Adjustable discharge pressure up to 10,000 psi. Maximum air inlet pressure 100 psi. 10 discharge hose included.
100:1 Ratio Air Motor Twin Pneumatic Cylinders Bucket Blow Off Filter / Regulator Follower Plate 10 Ft. Discharge Hose Control Valve 15,000 psi gauge Giant Button Head Coupler Portability Kit
Force Flow 50 Features
-
Air Operated Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
22
Model 35-50 Bucket Pump50:1 Air Motor & Pump TubeDischarge Pressure 5,000 psiFollower PlateBucket Cover & Handle Assy.10 Discharge Hose IDControl ValveGauge Tee15k GaugeWhip HoseStraight SwivelGiant Button Head Coupler NPTF
Model 45-100 Bucket Pump100:1 Air Motor & Pump TubeDischarge Pressure 10,000 psiFollower PlateBucket Mount Cover & Handle Assembly10 Discharge HoseControl ValveGauge Tee15k GaugeWhip HoseStraight SwivelGiant Button Head Coupler
Lubchem Bucket PumpsThe Lubchem Model 35-50 & 45-100 bucket pumps are economical air operated grease pumps designed to pumpbulk lubricants. The units are set up for 5 gallon containers and are equipped with follower plate, 10 dischargehose, control valve, straight swivel, 15,000 psi liquid filled gauge and a giant button head coupler.
-
Valve Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
23
Lubchem 1200 & 1500 Lube Pumps
The Lubchem 1200 &1500 Hand Guns apply up to 10,000 psi and 15,000 psi respectively, of dischargepressure with a minimum amount of applied force by the user. The guns are set up for lubricating both ballvalves and plug valves. The pumps are heavy duty, lever operated and are primed by tightening the T screwhandle. Both pumps accepts industry standard K size lube sealant grease sticks. The outlet thread is 1/4NPTF. Both pumps come equipped from Lubchem with hose assembly 967801 as seen below, additionalhose assemblies and options are available on request. To order the model 1500 use part number 908601,for model 1200 use part number 901601.
Caution:The model 1200 gun is not equipped with an internalball check in the head assembly and line pressure maybleed back into the barrel. Before removing the giantbutton head coupler, raise the plunger handle and turnthe primer screw counter clockwise to relieve pressure.
The model 1500 comes equipped with an internalcheck and pressure release.
I t e m D e s c ript io n It e m D e s c rip t io n
1 Head 16 P lunger Handle2 P ipe P lug 17 P lunger3 Nut 18 P ack ing Nut4 P rim er P lug 19 P ack ing 5 Washer 20 Head Gasket6 P rimer Spring 21 Co upler Cap7 Screw 22 Co upler Seal8 Nut 23 Co upler Spring9 B arrel 24 O-ring10 Co llar 25 Co upler P is to n11 Screw Handle 26 Co upler B o dy12 Link 27 Co upler A ssembly13 Stud 28 Co upler A dapter14 Lo ck Washer 29 Ho se 15 P lunger Stud
Hose Assembly 967801
-
Valve Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
24
Hose Assemblies
GAGES
SWIVELS STRAP
OTHER GAGES ARE AVAILABLE OTHER SIZES AVAILABLE
GAGE TEES SHUT OFF/RELIEF VALVE
965701- 12 " overall length hose with giant button head coupler(907601) and swivel (984701). 1/4" NPT male inlet x giant button head coupler outlet.
906601- 18 " overall length hose with giant button head coupler(905801) gage tee (944801)gage (937801), "Z"swivel (944701), swivel (914601), shut off relief valve(909901). 1/4" NPT male inlet x giant button head coupler outlet.
905701- 12 " overall length hose with giant button head coupler(903601). 1/4" NPT male inlet x giant button head coupler outlet.
967801- 18 " overall length hose with giant button head coupler(905801) gage tee (973601), gage (937801), swivel (914601). 1/4" NPT male inlet x giant button head coupler outlet.
957701- Screw Connection Hose Assembly for lubricatingvent cap fittings. 18" overall length hose with screw connection coupler. 1/4" NPT male inlet x 1-14" femaleoutlet.
Hose Assembly Rating- Working Pressure 10,000 psi, Burst Pressure 23,000 psi. Warning: Hoses are for use with handoperated grease guns only. Inquire regarding additional warnings. Consult Rubber Manufacturers Association Handbookfor proper operating procedure.
The bottom connectionis 1/4" NPT male.
- 15,000 psi 2 1/2" face
- 20,000 psi
937801
999501
ADVANTAGES Easy handling of operational grease gun is assured. Hose damage is reduced. Pressurized hoses will not twist.
- 1/4" NPT male x 1/2"-27 male- 1/4" NPT male x 1/2"-27 male- 1/4" NPT male x 1/2"-27 male- 1/8" NPT male x 7/16"-27 male
944701924601914601984701
- "Z"944701
- 90924601
- Straight914601 - Straight984701
Weight - 3 3/4 oz. Lightweight and strong, includes shoulder pad, hooks, rings, link. Adjustable and extends to 46".
- For Screw Prime Gun- For Hydraulic Grease Gun
961601944601
By using Lubchem gagetee, adapter is not required. 1/4" NPT male x 1/4"NPT female. (Special order teesavailable).
OTHER HOSE LENGTHS, END COMBINATIONS AND ASSEMBLIES ARE AVAILABLE
905601- 10" overall length swivel hose with giant buttonhead coupler (903601), gage tee (973601), gage (937801)1/4" NPT male inlet x 1-14" female outlet.
973601944801902601
- 1 1/4" hex- 7/8" hex- 1 1/4" hex
(includes check valve)
909901- 1/4" NPT male x 1/4" NPTfemale.
-
Valve Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
25
Lubricant Stick Size - JGrease Delivery - 1 ounce per 40 strokesSold With Hose Assembly - 967801
Pressure Rating - 10,000 psi15,000 psi gauge includedTotal weight - 13 lbs.
Lubchem Model 1000 Hydraulic Hand Pump
Description:The Lubchem 1000 Hydraulic Hand Pump (part # 900011) exerts a maximum pressure of 10,000 psi. It is a durableself priming pump that is easy to operate. This unit is equipped with a bypass valve that allows the user to relieveinternal pressure at any time by turning the bypass valve counter clockwise one revolution.As an added safety feature the Lubchem model 1000 is equipped with an internal hydraulic relief valve. This featureprovides maximum safety for the user by preventing over pressurization of the hydraulic system.
Features:Handle Latch Assembly- Prevents damage due to over extension of the piston.Graduated Handle - One ounce marked handle to eliminate waste and provide greater accuracy during injec-tion.
Warning - Use only UCON-500 hydraulic fluid or equal in this pump.
Repair and Exchange:Lubchem offers reconditioning and repair of all types of hydraulic hand guns. Simply send the gun to us and we willpromptly fax an estimate for the repair charges at no charge to you. The guns are normally returned within oneweek of your approval for the repairs.
Replacement parts and repair kits are available upon request.
Hose Assembly 967801
-
Valve Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
26
I t em Part N u m b er Descri p t i o n I t em P art N u m b er Descri p t i o n1 908701 B ody Assem bly 27 918701 L i n k A ssem b ly2 928701 B ody 28 977701 L i n k3 * 948701 Cy l i n de r 29 979701 St r i ppe r Bo l t4 * 924801 O - Ri n g 30 987701 Lock Nu t5 * 988701 O - Ri n g 31 903801 La t ch Assem b ly6 * 962601 O - Ri n g 32 953801 St em & Kn ob Assem b ly7 * 911801 O - Ri n g 33 933801 La t ch Screw8 * 958701 Plun ge r 34 973801 I n t e rn a l La t ch Sp r i n g9 * 970801 O - Ri n g 35 993801 Re t a i n e r Ri n g1 0 * 950801 I n t e rn a l Re l i e f Va lv e 36 913801 La t ch A r m1 1 * 956801 Fi l t e r A ssem b ly 37 923801 La t ch Sleev e12 909701 Ch eck Va lv e Assem b ly 38 983801 Cap Scr ew13 998701 Ch eck Va lv e Screw 39 901801 Pi st on A ssem b ly14 919701 Wash er 4 0 * 912801 Lea t h e r Cup15 939701 Fi l t e r Screen 41 951801 Pi st on 16 929701 Spr i n g 4 2 * 981801 O - Ri n g17 918601 B a l l 43 991801 Wash er Nu t1 8 * 984001 O - Ri n g 4 4 * 971801 Wash er 19 959701 B y -pass Va lv e 45 961801 Cap Screw20 979701 St em Re t a i n e r 46 921801 Grease Ba r re l21 989701 Cap Screw 47 931801 Grease Ba r re l Cap22 932801 Flu i d Bag B ar re l Cap 48 967701 H an d le23 922801 Flu i d Bag B ar re l 49 934801 La t ch Sp r i n g Ex t ern a l24 902801 Flu i d Bag B leede r Assem b ly 50 980801 Fi l t e r Screen25 982801 Flu i d Bag Sea l Ri n g * 904801 Repa i r K i t26 927701 Fu lcrum A ssem b ly
For additional information pertaining to trouble shooting and repair procedures pleaserefer to the Lubchem Model 1000 Maintenance & Repair manual.
Lubchem Model 1000 Hydraulic Hand Gun
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
27
ThreadSize Material Heat Treatment Plating Ball
Spring Part Number
1" NPT
1" NPT
3/4" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/4" NPT
1/4" NPT
1/4" NPT
1/4" NPT
3/8" NPT
3/8" NPT
3/8" NPT
1215 Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
316SS
1215
1215
316SS
4140
410SS
1215
316SS
4140
1215
316SS
4140
410SS
Annealed (NACE)
Annealed (NACE)
Annealed (NACE) BGF14-BH-2
BGF38-BH-2
BGF12-BH-3
BGF34-BH
BGF1-BH-2
BGF1-BH
Annealed (NACE)
Rc22 max. (NACE)
Rc22 max. (NACE) BGF14-BH-4
BGF14-BH
BGF38-BH
BGF12-BH-2
Rc22 max. (NACE) BGF12-BH-3
BGF38-BH-3
BGF12-BH4
BGF12-BH
Rc22 max. (NACE)
Rc22 max. (NACE)
CA
CA
CA
CA
CA
K-Monel
K-Monel
K-Monel
K-Monel
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
K-Monel
302SS
302SS
302SS
302SS
302SS
K-Monel
K-Monel
K-Monel
K-Monel
1 5/8"
SPRING
1/4" BALL
1"HEX
1 1/4" HEX
VENTED CAP
1" - 14 UNS
1 5/8"
SPRING
1/4" BALL
1"HEX
1 1/4" HEX
VENTED CAP
1" - 14 UNS
ACCEPTS BUTTON HEADOR SCREW -ON TYPE
GREASE GUN COUPLER
ThreadSize Material Heat Treatment Plating Ball
Spring Part Number
1" NPT
1" NPT
3/4" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/4" NPT
1/4" NPT
1/4" NPT
1/4" NPT
3/8" NPT
3/8" NPT
3/8" NPT
1215 Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
316SS
1215
1215
316SS
4140
410SS
1215
316SS
4140
1215
316SS
4140
410SS
Annealed (NACE)
Annealed (NACE)
Annealed (NACE) BGF14-2
BGF38-2
BGF12-3
BGF34
BGF1-2
BGF1
Annealed (NACE)
Rc22 max. (NACE)
Rc22 max. (NACE) BGF14-4
BGF14
BGF38
BGF12-2
Rc22 max. (NACE) BGF12-3
BGF38-3
BGF12-4
BGF12
Rc22 max. (NACE)
Rc22 max. (NACE)
CA
CA
CA
CA
CA
K-Monel
K-Monel
K-Monel
K-Monel
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
K-Monel
302SS
302SS
302SS
302SS
302SS
K-Monel
K-Monel
K-Monel
K-Monel
* Zinc w/DC - Zinc with dichromate *CA - AISI 52100 chrome alloyOther materials & plating available upon request
VENTED CAP BODY GREASE FITTING
VENTED CAP BODY GREASE FITTING w/ GIANT BUTTON HEAD
For Service to 10,000 psi
For Service to 10,000 psi
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
28
ThreadSize Material Ball Spring
HexSize Part Number
1" NPT
3/4" NPT
1/2" NPT
1/2" NPT
3/8" NPT
3/8" NPT
1/4" NPT
1/4" NPT
1/2" NPT
1215
316SS
1215
1215
316SS
1215
1215
1215
316SS
GBH12-20
GBH38-2
GBH12
GBH34
GBH1
GBH14-2
GBH38
GBH14
GBH12-2
CA
CA
CA
CA
CA
CA
Inconel600
Inconel600
Inconel600
302SS
302SS
302SS
302SS
302SS
302SS
K-Monel
K-Monel
K-Monel
1 5/16"
1 1/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
ThreadSize Material Ball Spring
HexSize Part Number
1/2" NPT
3/8" NPT
1/4" NPT
1/8" NPT
3/8" NPT
1215
1215
1215
1215
1215
GBH14-S
GBH38-S
GBH12-S
GBH38-16
GBH18-S
CA
CA
CA
CA
CA
302SS
302SS
302SS
302SS
302SS
7/8"
7/8"
7/8"
7/8"
7/8"
ThreadSize Material Ball Spring
HexSize Part Number
1/2" NPSM
3/8" NPSM
1/4" NPSM
3/4" NC
5/8" NC
3/4"NF
1/2" NC
1215
1215
1215
1215
1215
1215
1215
CLF14-S
CLF38-S
CLF12-S
CLF34-16-S
CLF12-13-S
CLF34-10-S
CLF58-11-S
CA
CA
CA
CA
CA
CA
CA
302SS
302SS
302SS
302SS
302SS
302SS
302SS
2 7/16"
3 3/4"
3 1/8"
2 7/8"
3 7/16"
3 1/8"
2 3/16
ThreadSize Material Ball Spring
HexSize Part Number
3/4" NPSM
1/2" NPSM
3/8" NPSM
1/4" NPSM
1215
1215
1215
1215
CLF38
CLF12
CLF34
CLF14
CA
CA
CA
CA
302SS
302SS
302SS
302SS
3 7/16"
4 3/4"
2 7/16"
3 3/4"
GIANT BUTTON FITTINGS (GBH)
COMBINATION LUBE/INJECTOR (GHB)
Double Ball Check
Single Ball Check
For Service to 10,000 psi
For Service to 10,000 psi
DOUBLE BALL CHECKSINGLE BALL CHECK
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
29
SAFE SEAL (Giant Button Head)
*316SS Material-Annealed Rc 22 max. (Nace)*CA-Aisi 52100 chrome alloy *Zinc with dichromateOther configuration, materials & plating available upon request.
ThreadSize Material Plating Ball Spring Part Number
1/2" NPT
1/2" NPT
3/8" NPT
3/8" NPT
1/4" NPT
1/4" NPT
1215 Zinc W/DC
Zinc W/DC
Zinc W/DC
316SS
316SS
1215
1215
316SS LS10N2C0
LS10N310
LS10N4C0
LS10N410
LS10N210
LS10N3C0
CA
CA
CA
K-MonelInconel
600
Inconel600
Inconel600
302SS
302SS
302SS
K-Monel
K-Monel
Double Check - 2 Piece Metal To Metal Seal with Floating Cone to Prevent Seat GallingFor Service to 10,000 psi
"FREE FLOW" BODY GREASE FITTING
OPEN VALVE
LUBRICANT FLOW
CLOSED VALVE
Even the heaviest of lubricants that can be pumped or sealants that can be compressed (extruded) through apacking fitting, will flow freely through fittingsincorporated with the "FREE FLOW" concept.
Other FeaturesCan Be Used With a Ball Soft Seat
Increased Fitting Function in Extreme Cold Enviroments.
Protects Spring From Damage - Permits a more effectiveusage of Low Hardness Corrosion Resistant Spring WireMaterials.
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
30
ThreadSize Material Heat Treatment Plating Ball Part Number
1/2" NPT
3/8" NPT
1/2" NPT
3/8" NPT
1/2" NPT
1/4" NPT
1/4" NPT
3/8" NPT
1/4" NPT
3/4-10 TPI
5/8-11TPI
1215
316SS
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
316SS
4140
4140
1215
4140
1215
316SS
1215
1215
Annealed (NACE)
Annealed (NACE)
Annealed (NACE)
Rc 22 max. (NACE)
Rc 22 max. (NACE)
Rc 22 max. (NACE)
PIF12-3
PIF14
PIF14-3
PIF12-2
PIF38-3
PIF12
PIF38-2
PIF38
PIF14-2
PIF34-10
PIF58-11
302SS
302SS
302SS
302SS
302SS
302SS
K-Monel
302SS
302SS
K-Monel
K-Monel
*Zinc w/DC - Zinc with Dichromate *CA - AISI 52100 chrome alloyOther configurations, materials & plating available upon request
PACKING INJECTION FITTING
BODY VENT (BLEEDER) FITTINGS
(Bonnett or Plastic Injection Fitting)FOR SERVICE TO 10,000 psi
FOR SERVICE TO 10,000 psi
ThreadSize Material
HexSizel OAL Heat Treatment Plating Ball Part Number
1 1/2" NPT 2" 2 5/8"
3/4" NPT
1 1/4" NPT
1/2" NPT
1" NPT
1/2" NPT
3/8" NPT
1" NPT
1/2" NPT
3/8" NPT
1/4" NPT
1/4" NPT
1215
1215
1215
316SS
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
1215
4140
1215
316SS
316SS
316SS
1215
1215
Annealed (NACE)
Annealed (NACE)
Annealed (NACE)
Annealed (NACE)
Rc 22 max. (NACE)
BV1
BV12-2
BV38
BV114
BV12
BV112
BV34
BV1-2
BV12-3
BV38-2
BV14
BV14-2
440SS
440SS
440SS
440SS
440SS
440SS
440SS
440SS
TC
TC
TC
TC
*Zinc w/DC - Zinc with Dichromate *CA - AISI 52100 chrome alloyOther configurations, materials & plating available upon request
1 3/4"
1 5/16"
1 5/16"
1 1/8"
7/8"
7/8"
7/8"
7/8"
7/8'
7/8"
7/8"
2 1/2"
2 7/16"
2 7/16"
1 3/4"
1 5/8"
1 5/8"
1 5/8"
1 5/8'
1 5/8"
1 5/8"
1 5/8"
OAL
3/4" Hex Head Stem
Hex Body
Venting Port
Sealant Ball
1/4" Thru 1 1/2" NPT
Stop PinPrevents Stem
Disengagement
Roll PinRetainer
1/4" Diameter Ball
7/8" Hex
Saftey Vent
3/4" Hex HeadStinger
OAL
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
31
Combination Lube Adapter
SafetyVentHole
When was the last time you traveled a great distance to service a valve only to find that the fittingon the valve was not a standard type? The Lubchem Valve Adapter Kit contains 12 adapter fittingsthat will provide the flexibility you need to service a wide variety of standard and non-standardvalve fittings. The kit also includes fittings to contain leaks on damaged fittings.
Convert short WKM style screw on vent cap fittings 3/4" to standard giant button head. Convert regular WKM style screw on vent cap fitting 1" to standard giant button head.Convert McEvoy and 7/8" style screw on vent cap fittings to standard giant button head. Convert small Cameron 3/4" style screw on vent cap fitting to standard giant button head. Convert packing injector fitting to standard giant button head.
The following parts are included in our kit.
Combination Lube adapters included are:
Leak Lock Fittings:
Giant Button Head Leak Lock fitting for leaking or damaged standard button head. Giant Button Head Fitting for leaking or damaged standard button head. Giant Button Head Leak Lock fitting for damaged or leaking oversized giant button head fittings. Standard Giant Button Head fitting with adapter to convert Cameron 3/4" vent cap fitting to standard giant button head.
Standard Leak Lock Fitting
SealingGasket
ButtonHead Fitting
Lubchem Valve Lube Adapter KitPart # VAK10
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order 800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your local Lubchem representative.
32
Pressure Relief Tool for Packing Injection Fittings
Pressure Relief Tool
Pressure Relief Tools:
Pressure relief tool for packing injector fittings. Pressure relief tool for WKM style vent cap fitting Body vent bleeder fitting.
Lubchem Valve Lube Adapter KitPart # VAK10