Download - Mbbr media
Dear Sir/ Madam we are an ISO 9001-2008 certified manufacturer.Supplier & Exporter of Environmental Plant & products.For Sewage, Effluent & Ro plant & products.
1) BIO PAC MEDIA (FAB MEDIA)( MBBR MEDIA). 2) FINE BUBBLE TUBE DIFFUSERS (63DIA & 90 DIA)3) COARSE BUBBLE DISC DIFFUSER (80 DIA & 150 DIA) 4) TUBE SETTLERS (HEXAGONL SHAPED)5) FILL PAC MEDIA (FLOWER MEDIA)6) FINE BUBBLE DISC DIFFUSERS (250 DIA &300 DIA) 7) FILTER PRESS8) AIR BLOWER9) PRESSURE VESSELS
Dear sir / madam are in requirement of these Media's and DiffusersPlease give our company a chance to serve you the bestWith good Quality and good price.
THANKING YOUMr. MUNNI RAAJBAJRANG ENVIRO ENGINEERS™ (An ISO 9001:2008 Certified Company) BALANAGAR HYDERABAD 500042(M) 09912607343, 09296406158FAX & PHONE = 040 66337343MAIL: [email protected]:www.bajrangenviro.co.in www.bajrangenviro.comwww.bajrangenviro.net
MBBR MEDIA,FAB MEDIA,BIO PAC MEDIA We are the leading manufacturer and supplier of MBBR
Media. Our quality made us a leading company in india. We offer the 100% best quality products and with very competitive price.
MBBR MEDIA, BIO PAC MEDIA, (FAB MEDIA)
Type of Media MBBR, BIO PAC (FAB Media)
MOC OF MEDIA Polypropylene
SPECIFIC GRAVITY 0.9
SHAPE CYLINDRICAL
HEIGHT & DIAMETER Dia 22mm x 16 mm height
PROTECTED SURFACE AREA 400 (M2)
TOTAL SURFACE AREA 450-475 (M2)
COLOUR Black
THICKNESS 1.0mm
MAX. CONTINUOUS WORKING TEMP
55C
TUBE SETTLERS With the use of excellence tested material and higher technology, we
offer hexagonal shaped tubesettlers. Owing to their tongue & groove arrangement, the products can be simply installed into the water treatment plants.These components are easy to install and offer a long service life.
TUBE SETTLERS (HEXAGONAL) SHAPE
CROSS SECTIONAL AREA HORIZONTEL -120MM VERTICAL44MM
MOC OF MEDIA PVC
SHAPE OF TUBE HEXAGONAL
TUBE FITTING TONGUE AND GROOVE
THICKNESS 1.0MM (+/- 0.1 MM)
MAX CONTINUOUS OPERATING TEMP
55 DEG. C
COLOUR Black
PLAN SETTLING AREA 11M2/M3 (AT 60 DEG. SLOPE)
HEIGHT OF MEDIA 750mm, 1000mm
MEDIA MUST BE STORED IN A COVERED PLACE WITH ADEQUATE VENTILATION
FILL PAC MEDIA
We are the leading manufacturer and supplier of FILL PAC MEDIA.Our quality made us leading company in india. These components have cylindrical shape with internal ribs. Our range is used for trickling filter, anaerobic and SAFE reactors. FLOWER MEDIA WHEEL MEDIA, FILL PAC MEDIA
Type of Media WHEEL (FLOWER) MEDIA
MOC of Media POLYPROLYLENE
Structure cylindrical shape, with internal ribs
Media Size 187Ømm X 51mm
Specific Gravity 0.9
Surface Area/unit bulk volume 100 m 2/m3 bulk volume
Max continuous Operating temp 80’c
Color Black
Media usage trickling filter/Anaerobic./SAFF Reactor
COARSE BUBBLE DISC DIFFUSER {AIRSON-AD} With the brilliant team of professionals, we are providing a broad assortment
of Coarse Bubble Disc Diffusers. Coarse Bubble Disc Diffusers is available with us in different sizes and specifications. The offered range is widely used in industries where waste water is generated. These are manufactured using quality tested material and latest techniques in accordance to meet with the international quality standards. BUBBLE SIZE 4mm to 5 mm
MOC of diffuser Epdm & Silicon
MOC of diffuser support ABS
Sizes Ø80 mm
Type of bubble Course bubble
Bubble temperature Tolerance
85 deg Celsius
End connection ¾”BSP male thread
Operating temperature 35 deg Celsius
Type of air discharge Top air discharge
No of Air Discharge Ports 10Nos
Air Flow Rate per Diffuser 3-4m³/hr
Shape of Diffuser DISC TYPE
COARSE BUBBLE DISC DIFFUSER {AIRSON-AD} With the brilliant team of professionals, we are providing a broad assortment
of Coarse Bubble Disc Diffusers. Coarse Bubble Disc Diffusers is available with us in different sizes and specifications. The offered range is widely used in industries where waste water is generated. These are manufactured using quality tested material and latest techniques in accordance to meet with the international quality standards. BUBBLE SIZE 4mm to 5 mm
MOC of diffuser Epdm & Silicon
MOC of diffuser support ABS
Sizes Ø150 mm
Type of bubble Course bubble
Bubble temperature Tolerance 85 deg Celsius
End connection 1”BSP male thread
Operating temperature 35 deg Celsius
Type of air discharge Peripheral air discharge
No of Air Discharge Ports 8Nos
Air Flow Rate per Diffuser 6-8m³/hr
Diffuser support Color BLUE
FINE BUBBLE DISC DIFFUSER {AIRSON-AD}
Matching to the requirements of clientele, we are involved in providing most excellent quality of Fine Bubble Disc Diffusers. The products obtainable by our company are extremely tested for their quality and manufactured using elevated grade raw material. Installed in a grid layout mode covering the entire tank floor, these are also installed as in-line configuration for cross or spiral rotation of the tank contents.
BUBBLE SIZE 1mm to 2 mm
MOC of diffuser Epdm & Silicon
MOC of diffuser support Poly propylene
Sizes 220 mmX 220mm/ 9”X9”
Type of bubble Fine bubble
Bubble temperature Tolerance
85 deg Celsius
End connection 1”BSP male thread
Operating temperature 35 deg Celsius
Type of air discharge Top air discharge
Air Flow Rate per Diffuser 2-6m³/hr
Diffuser support Color BLUE
Shape of Diffuser DISC TYPE
FINE BUBBLE DISC DIFFUSER {AIRSON-AD} we are involved in providing most excellent quality of Fine Bubble
Disc Diffusers.The products obtainable by our company are extremely tested for their quality and manufactured using elevated grade raw material. Installed in a grid layout mode covering the entire tank floor, these are also installed as in-line configuration for cross or spiral rotation of the tank contents.
BUBBLE SIZE 1mm to 2 mm
MOC of diffuser Epdm & Silicon
MOC of diffuser support Poly propylene
Sizes 320 mmX320mm/12”X12”
Type of bubble Fine bubble
Bubble temperature Tolerance
85 deg Celsius
End connection 1”BSP male thread
Operating temperature 35 deg Celsius
Type of air discharge Top air discharge
Air Flow Rate per Diffuser 6-12m³/hr
Diffuser support Color BLUE
Shape of Diffuser DISC TYPE
FINE BUBBLE TUBE DFFUSER {AIRSON-AD} We are the leading manufacturer of Tube Diffusers Fine
Bubble. Our product range requires fewer header pipes, less support stands and less installation time than disc diffusers. These tube membranes are extruded from low extractable oil content EPDM polyurethane, Silicon or Nitrate.FINE BUBBLE TUBE DIFFUSER Ø63MM X 610MM
Shape of Diffuser Tube Type
Type of Bubble Fine bubble
MOC of Membrane EPDM / silicon
MOC of Membrane Support PVC PIPE
MOC of Membrane Clips SS
MOC of Diffuser Male Adapter ABS
Operating Temperature of Membrane
85 deg. Celsius
Nipple attached to diffuser ¾”x3”
Dimensions of Bubble >1mm
Air put through rate 4 to 6m3/hr
FINE BUBBLE TUBE DIFFUSER {AIRSON-AD} We bring forth fine bubble tube diffusers A available with pipe support. S.S.
membrane clips and S.S. membrane clips. Our products are manufactured using high quality material that are procured from trusted vendors of the market. Owing to its optimum quality, the average temperature of the membrane is 85 deg. celsius.
FINE BUBB FINE BUBBLE TUBE DIFFUSER Ø63MM X 1000MMShape of Diffuser Tube Type
Type of Bubble Fine bubble
MOC of Membrane EPDM / silicon
MOC of Membrane Support
PVC PIPE
MOC of Membrane Clips SS
MOC of Diffuser Male Adapter
ABS
Operating Temperature of Membrane
85 deg. Celsius
Nipple attached to diffuser
¾”x3”
Dimensions of Bubble >1mm
Air put through rate 8 to 10m3/hr
FIN E BUBBLE TUBE DIFFUSER {AIRSON-AD} We bring forth fine bubble tube diffusers A available with pipe
support. S.S. membrane clips and S.S. membrane clips. Our products are manufactured using high quality material that are procured from trusted vendors of the market.
FINE BUBBLE TUBE DIFFUSER Ø90MM X 1000MMShape of Diffuser Tube Type
Type of Bubble Fine bubble
MOC of Membrane EPDM / silicon
MOC of Membrane Support
PVC PIPE
MOC of Membrane Clips SS
MOC of Diffuser Male Adapter
ABS
Operating Temperature of Membrane
85 deg. Celsius
Nipple attached to diffuser
1”x3”
Dimensions of Bubble >1mm
Air put through rate 11 to 14m3/hr
FILTER PRESS Our quality products are developed using the optimum quality
raw materials and components that are purchased from authentic vendors of the industry. All the raw materials are properly checked for their compliance with the international quality standards, before being used in the production process.
• SIZE 18” X 18”(450mm X 450mm) • 24” X 24”(600mm X 600mm)• 30” X 30” (750mm X750mm)• 36” X 36” (900mm X 900mm)• 48” x 48” (1200mm X 1200mm)