1
Measurement Engineering for Heating and Installation
Icons
Backlit display
Infrared printer
Reliable printout of measurementresults on site
Barcode reader
Used for data administration,customer allocation and schedu-ling
RS 232 interface
For easy connection to all sectorsoftware
User-friendly operation due tomenu-driven functions
SoftCase or TopSafe to protectinstrument during tough applica-tions
Shock-proof
Battery operation also possible
Battery can be recharged ininstrument
Flue Gas Analysis
Installation
Safety
Accessories Page 16
testo 325-2/3 Page 6-9
testo 325 M/XL Page 6-9
testo 300 M/L/XL Page 10-13
testo 300 XXL Page 14-15
Temperature Page 18-21
Pressure Page 21-23
Endoscopy Page 24
Wood/Material moisture meter Page 24
Gas leak detector Page 25
Flue gas spillage detector Page 25
CO warning instrument Page 26-27
Contents
2
New opportunities: The market for the supply of heat to buildings ischanging constantly. Solar systems, heat pumps and other technolo-gies, integrated concepts for energy supply and electronic controlsystems have established themselves. The objectives remain thesame - demand controlled heat supply, low energy consumption andlow emissions.
Regardless of the technology involved – every furnace must function100%; regular checks and tuning are therefore required. Our contribu-tion: We supply the best measurement engineering. We follow alldevelopments attentively, we are there wherever there is somethinggoing on. We recognise trends far in advance and can therefore offerwell-engineered applications ahead of the competition. You haverewarded us for our commitment by making us number one world-wide in the heating engineering sector.
Playing it safe.Measuring instruments must be reliable and efficient. For this reason,once developed we do not regard our products as being ready for themarket. Instead, we subject them to tough tests in the field. It is only
when this test is successful that we start with serial production. Allmeasuring instruments which leave our factory undergo qualityinspections.
Spoilt for choice?It is impossible to find another product line with so many well-engi-neered, mobile gas analysers as we have. We admit that that couldsometimes make the decision more difficult for you but you are guar-anteed that you are working with the best suited product for yourmeasurement job. Regardless for which flue gas analyser you decide,you can be assured that the gas paths are optimised i.e. are kept asshort as possible. Susceptibility and corrosion are thus avoided. Theresults of your measurements are made available immediately. User-friendly and intelligible operation, a well thought-out accessory andmeasurement case system ensure that you can work – efficiently, fastand professionally.
Combustion points undercontrol
3
“Is there a heatingfitter in R&D?”
Edgar Mesam laughs astutely when askedabout the quality of our products. The com-mitted owner of a heating and plumbing busi-ness in Bannholz has been a customer ofTesto for many years. As a heating fitter, he iscommitted to protecting the environment. Weasked him to speak about his experience withTesto products.
Edgar Mesam:“We are mainly involved in the maintenanceand upkeep of existing systems. It is not asspectacular as the installation of renewableenergy technology (which we also do, ofcourse) but the potential for saving energy ishuge. A defective system can use more than50% more energy compared with a system ingood working order and just an incorrectlyadjusted system can mean increased powerconsumption of 20 to 30%.
My most important tool for adjusting heatingsystems is first-class measurement engineer-ing which I get from Testo – all-inclusive, fromthe flue gas analyser to the fiberscope andeverything that goes with it. In my own expe-rience – and I have been in the business for20 years – no other manufacturer meets therequirements in the field like Testo does withits products.
Another important point: With Testo, I don´thave to grapple with the measurement engi-neering I get, I can select what I need for myrequirements from the wide range of equip-ment and accessories within an instrumentline.
Keep up the good work! I´m already lookingforward to the newest innovations which havealways convinced me up to now!
Edgar Mesam,Mesam GmbHHeating and Plumbing
Measurement cells with added value!The sensors specially developed for Testo have an above-averagelifetime of 2-3 years. One outstanding feature are measuring instru-ments in which you can exchange the measurement cell yourself –without the need for test gas calibration. Back in operation immedi-ately – couldn´t be quicker.
The cheapest measuring instrument sometimes turns out to be themost expensive...Heating problems in Winter. A true emergency! And your flue gasanalyser breaks down today of all days! This is where we come in. Weare proud of the top quality service we provide.
Learning changesWhat was that? What flue gas flows are permitted according to theregulations governing wood furnaces? We offer in-depth documenta-tion and leaflets on Testo Measurement Engineering, current stan-dards and guidelines and their implementation.
testo 325
testo 300 M/L/XL
testo 300 XXL
Page 6
Page 10
Page 14
The right flue gas analyser for ev
For
heating
systems
5very requirement
Versatile instrument for professional maintenance
Comfort instrument for professional maintenance
Top instrument for extreme demands testo 300 XXL
testo 300 Mtesto 300 L/XL
Starter instrument with proven efficiency
Introduction to professional maintenance
testo 325 Mtesto 325 XL
Control measurement on the gas heater
Basic adjustments on oil and gas burners
testo 325-2
testo 325-3
OutlineAdjusting efficiency: TÜV approved O2, CO2, qA, °C, λ
Combustion quality: CO flue gas
Up to 2000 ppm, for gas systems
Up to 4000 ppm, for gas or oil systems with low pollution
No for low NOx inspections
Flue draught
Differential temperature, adjusting flow and return temperatures
Protection of CO measurement cell via switch-off function
Differential pressure, for adjustment of pressure ratios in gas systems, mbar/hPa
Probe for detecting gas leaks
Protection: Probe for measuring ambient CO
Printout with data and time
Timer function: Audible/optical alarm
Immediate stand-by: Measurement cells are exchanged without test gas adjust-mentAllocation and processing of information (analysis software)
Built-in data memory, no. of data blocks
Transmission of readings via RS 232 interface
Printer connection with print text
Barcode connection
State inspection: TÜV approved CO
* Only for testo 300 XL
8000 ppm, for oil systems with a high pollution level
30,000 ppm, for oil systems with extreme pollution and solid fuel systemsOpt.
Opt.Opt.
Autom.Man.
Opt.
40 40 40/200 40/200 80 80 80/1000
20 100 4000
testo testo testo testo testo testo testo
325-2 325-3 325 M 325 XL 300 M 300 L/XL 300 XXL
*
*
6
testo 325 – Introduction to Professional Flue Gas Analysis
Large, backlit display
Condensate trap in instru-ment
Gas pressure measure-ment with additionalsocket for +/-
User-friendly operation
Do you manage toget home by 5pmevery day?
Probably not,because yourjob expectsabove-averagededication. Youalso need part-ners who won´tlet you down.We are leadingthe way with ourquality service.
Check it out for yourself.
Do you need an accessory, doyou have a question about meas-uring or do you need a replace-ment instrument? – Testo Serviceemployees are at your service inmany locations – also near you.Good to know when the situationrequires.
Hans-Dieter Guth,Market ManagerContractors BU,Germany
7
testo 325 M / 325 XLtesto 325 M and XL instrumentssupply all important parameters(O2, CO, °C) at a glance.
They enable differential tempera-ture and differential pressuremeasurements (40/200 hPaswitchable) and fulfill all therequirements for the adjustment,maintenance and servicing of gasand clean oil burners (CO to4000 ppm).
• O2 TÜV approved
• Data documentation printed onsite
testo 325 XL: Additional features:
• TÜV approved CO measure-ment function
• Cache for
- CO level, environment
- O2 concentration, ingoing air
• Specific factors can be set for 6fuels
• Memory for 20 data blocks
• Battery recharging in instrument
testo 325-2 / 325-3The testo 325-2 and -3 instru-ments offer the standard func-tions of flue gas analysis for thebasic adjustment of oil and gasburners.
testo 325-2 measures O2 in fluegas, flue draught and calculatesflue gas loss and efficiency.
testo 325-3 measures the COlevel (up to 2000 ppm), draughtand gas flow pressure.
• TÜV approved O2, CO2 andtemperature measurementfunction
• Measures flow/return tempera-ture with separate probes; ∆Tdisplay (325-2/3)
• Data documentation printed onsite
• Magnetic SoftCase for protec-tion and positioning
testo 325 XL
testo 325-2/-3 testo 325 M testo 325 XLTechnical data
Temperature measurement
Meas. range -40 to +600 °C -40 to +600 °C -40 to +600 °C
Draught/Pressure measurement
delta P1 ±40 hPa ±40 hPa ±40 hPa
Efficiency measurement (Eta)
Flue gas loss (qA)
Meas. range 0 to 120 % 0 to 120 % 0 to 120 %
Meas. range 0 to 99.9 % 0 to 99.9 % 0 to 99.9 %
O2 measurement
Meas. range 0 to 21 Vol. % 0 to 21 Vol. % 0 to 21 Vol. %
CO measurement
Meas. range 0 to 2000 ppm 0 to 4000 ppm 0 to 4000 ppm
CO2 measurement
Display range 0 to CO2max 0 to CO2max 0 to CO2max
delta P2 ±200 hPa
testo 325-3 SetFlue gas inspection instrument
testo 325-3 flue gas analyser incl. batteries and calibration protocol
Flue gas probe, 180 mm immersion depth
Case
testo 325 M Basic SetStarter instrument for flue gas analysis
testo 325 M, flue gas analyser incl. battery and calibration protocol
230 V power unit for mains operation and recharging batteries
Compact flue gas probe, 180 mm immersion depth
Ambient air probe, 190 mm immersion depth
System case for measuring instrument, probe and accessories
SoftCase made of elastic plastic incl. magnetic plate and carrier strap
Testo printer
Part no. 0563 0332
Part no. 0563 0340
testo 325 M
O2, draught, °C measurement
Part no. 0563 0330
Flue gas analyser, incl. batteries andcalibration protocol
O2, CO2, °C, CO
Part no. 0632 0322
Flue gas analyser incl. battery and cali-bration protocol
testo 325-2
Time for the essentials“To be quite honest, the phones are usually quiet between 6 and7pm but the few who do call are delighted when somebody answers the phone.That´s why I´m happy to be here. Testo, at your service!
Regina MarxSales
testo 325 XL Basic SetProfessional flue gas analysis
testo 325 XL, flue gas analyser incl. rech. battery and calibration protocol
230 V power unit for mains operation and to recharge batteries
TÜV approved flue gas probe, 180 mm immersion depth
Ambient air probe, 190 mm immersion depth
System case for instrument, probe and accessories
SoftCase made of elastic plastic incl. magnetic plate and carrier strap
Smoke tester
Part no. 0563 0334
O2, CO2, °C, CO, H2
Part no. 0632 0321
Flue gas analyser incl. rechargeablebattery and calibration protocol
±200 hPa
8
Part no.
Part no.
0554 0545
0554 0569
0554 0568
0554 1084
0554 0315
0554 0449
0554 0040
0554 0307
0554 0308
0516 0326
0516 0329
0516 0328
0516 0331
0516 3250
0516 2570
Part no.
Part no.
0600 9544
0600 9542
0600 9543
0600 9546
0632 1244
0600 8540
0600 9440
0516 2572
Printer and Accessories
Suitable probes at a glance Illustration
Testo printer with 1 roll of thermal paper and 4 AA size batteries, Prints readings on site
Accessories
300 mm
Ø 8 mm
180 mm
Ø 8 mm
Additional Accessories and Spare Parts
Spare thermal paper for printer (6 rolls)
Spare thermal paper for printer (6 rolls), Measurement data documentation legible for up to 10 years
Hose connection set, incl. silicone hose and connection adapter, For separate gas pressure measurement
Pressure connection hose, single, diameter: 4/6 mm, 50 cm long, without connection adapter
Spare particle filter (10 off)
Smoke tester with oil, soot sheet, for measuring soot in flue gas
Filter paper to determine smoke number, 40 strips for approx. 200 measurements
System case for measuring instrument, probe and accessories, easily attached to other system cases
Tools system case with tools bag without contents, attachable to system case 0516 0326
Product line system case with small plastic boxes without contents, attachable to system case 0516 0326
Universal system case without sections, attachable to system case 0516 0326, For easy storage of measuring instrument and additionalaccessories
Transport case (plastic) for instrument, probes and accessories, For safe and orderly storage
Transport and Protection
SoftCase made of elastic plastic with magnetic plate, carrier strap, Protects instrument from dirt and impact (testo 325-2/-3)
Compact flue gas probe, 180 mm immersion depthincl. probe stop for positioning, NiCr-Ni thermocoupleup to +500°C, 1.5 m hose
Compact flue gas probe, 300 mm immersion depthincl. probe stop for positioning, NiCr-Ni thermocoupleup to +500°C, 1.5 m hose
TÜV approved flue gas probe, 180 mm immersiondepth, corresponding to the latest instrument testguidelines for measurements on atmospheric gassystems, 2.2 m hose TÜV approved flue gas probe, 300 mm immersiondepth, corresponds to the latest instrument testing gui-delines, for measurements on atmospheric gas systems,2.2 m hose
Dual wall clearance probe, sickel shaped supply O2probe for measuring the O2 level in systems inde-pendent of ambient air
For testo 325 XL only
High temperature probe, TI thermocouple up to1000°C, 300 mm immersion depth, incl. probe stop,heat protection screen, 2.2 m hose
Flexible flue gas probe, 330 mm immersion depth,NiCr-Ni thermocouple up to +500°C, 2.2 m hose
Ø 8 mm
180 mm
Ø 8 mm
300 mm
Ø 8 mm
300 mm
Ø 10.5 mm
330 mm
SoftCase made of flexible plastic incl. magnetic plate and carrying strap, protects analyser from dirt and impact (testo 325 M/XL)
Power unit 230 V/ 8 V/ 1 A, for instrument (European plug), For mains operation and battery recharging
9
Clamp probe for measurements on pipes, pipe dia-meter 15 to 25 mm (max. 1"), meas. range short-term up to +130°C
-50 to +100 °C Fixed cableClass 2 5 s
Pipe wrap probe with Velcro strip, for temperaturemeasurement on pipes with diameter up to max. 120mm, Tmax +120°C
0 to +120 °C Fixed cableClass 1 90 s
150 mm
Ø 4 mm
60 mm
Ø 4 mm
190 mm
Ø 4 mm
395 mm
20 mm
The complete set in a robust case
Everything is stored ready to hand and easy to find in a robust andpractical Testo system case: testo 325 M flue gas analyser, powerunit, 180 mm compact flue gas probe, 190 mm ambient air probe,SoftCase, Testo printer, multimeter, smoke tester, magnetic tester,nozzle spanner, pressure test set, pressure meter, spillage detector,gas leak stick and service labels – i.e. fully equipped for maintenanceon oil burners and gas heaters.
testo 325 M – Set with all the tools you need for maintenance
Meas. range Accuracy Conn.t99IllustrationTemperature probes
Quick-action surface probe with sprung thermocou-ple strip, for measurements on floor heating systems,radiators, insulations...
-60 to +300 °C Fixed cableClass 2 3 s
Ambient air probe, immersion depth 190 mm, withprobe stop, magnetic clip, Tmax +100°C, for ambientair temperature measurement in systems which aredependent on/independent of ambient air
0... +100 °C
Ambient air probe, immersion depth 60 mm, with probestop, magnetic clip, Tmax +100°C, for dual wall clea-rance temp. meas. in systems with outside primary airintake
0 to +100 °C 30 s
35 mm
testo 325 M – Set with all the tools you need formaintenance
testo 325 M, flue gas analyser incl. battery and calibration protocol
230 V power unit for mains operation and recharging batteries
Compact flue gas probe, 180mm immersion depth
Ambient air probe, 190mm immersion depth
System case for measuring instrument, probe and accessories
SoftCase made of elastic plastic incl. magnetic plate and carrier strap
Testo printer
Multimeter
Smoke tester
Nozzle spanner
Pressure test set
Pressure meter
Spillage detector
Gas leak stick
Service labels
Part no. 0563 0333
0602 4692
0628 0020
Part no.
0602 0392
0600 9788
0600 9798
10
How manydegrees are therereally?
How can you besure that youranalyser meas-ures exactlywhat it shouldbe measuring?Our certifiedDKD laborato-ries are unbeat-able in theiraccuracy and
give the values for all Testo meas-uring instruments – That’s whattrue measurement efficiency is allabout.
The competence of our engineersis held in high esteem by expertgroups and committees in Berlinand Brussels where they areinvolved in the developments offuture guidelines in their capacityas representatives of industry.
A comprehensive exchange ofknowledge and experience withofficial measurement institutesaround the world (e.g. DKD)ensures that your Testo measur-ing instrument can hold up to anycomparison. Indeed, these effortsdo have an objective: whoeveruses Testo measurement engi-neering, can be assured that heis using the industrial standard.
Of further benefit to you: Weknow today about the guidelinesand test specifications we will befaced with in the future.
Easy to read display
Gas sensors which canbe changed by the user
SoftCase with magneticholder
Clear allocation for easyoperation
Knut Hoyer, Head of Compe-tence Center forGas Analysis
testo 300 – Perfect for Professional Maintenance
11
testo 300 M SetProfessional analysis for heating fitters
Customer Service – Individual
“Since we started offering Service and Repairs in Customer Cen-ters, we now suddenly have more customers dropping by for a cup of coffee.Most of them are able to take the repaired instrument home a little later.”
Horst KohlheimService technician, Customer Center North Germany
O2, CO2, °C, CO
Part no. 0563 0310
Professional flue gas analyser, incl.rechargeable battery and calibrationprotocol
testo 300 M
O2, CO2, °C, CO, (NO)
Part no. 0563 0345
Flue gas analyser incl. rechargeablebattery and calibration protocol, 100memory
testo 300 L
O2, CO2, °C, CO, (NO)
Part no. 0563 0300
Pro flue gas analyser, incl. rech. battery andcal. protocol, 100 memory, gas leak detec-tion probe/ambient CO probe connection
testo 300 XL
testo 300 M, flue gas analyser, incl. rech. battery and calibration protocol
SoftCase (dirt/impact protection for measuring instrument)
230 V power unit for measuring instrument
Compact flue gas probe, 300 mm immersion depth
Mini ambient air probe, 190 mm long
System case with foam insert for measuring instrument, probes and accesso-ries
Testo printer for cordless reading printouts
Part no. 0563 0469
testo 300 L SetConvenient professional analysis
testo 300 L flue gas analyser incl. rechargeable battery and calibration protocol
230 V power unit for mains operation and recharging batteries
Compact flue gas probe, 300 mm immersion depth
Mini ambient air probe, 190 mm long
SoftCase protection case incl. magnetic plate
System case with foam insert for instrument, probes, accessories
Smoke tester incl. oil, soot sheets, reference scale
Part no. 0563 0471
testo 300 L/XLtesto 300 L/XL can be used tocarry out official measurements.The CO measurement can beswitched off manually.
testo 300 M: Additional features
• Memory for 100 (optional 400,testo 300 XL) data blocks
• Barcode reader to read in sys-tem data
• Attachable printer (testo 300XL)
• Gas leak detection probe (testo300 XL)
• Ambient CO probe (testo 300XL)
testo 300 Mtesto 300 M, the robust flue gasanalyser for all gas and oil burn-ers as well as clean solid fuelburners (CO to 8000 ppm).
testo 300 M can analyse andmanage measurement data onyour PC (RS 232 interface).
• TÜV approved CO, O2, CO2and temperature measurementfunction
• NO measurement (optional)
• H2 compensation
• Integrated condensate trap
• Large display (6 parameters ata glance)
• Mains connection, rechargeablebattery or battery operation
testo 300 M testo 300 L/XLTechnical data
Temperature measurement
Meas. range -40 to +1200 °C -40 to +1200 °C
Draught/Pressure measurement
delta P1 ±80 hPa ±80 hPa
Efficiency measurement (Eta)
Flue gas loss (qA)
Meas. range 0 to 120 % 0 to 120 %
Memory
Other features
20 100 testo 300 L
100 (400) testo 300 XL
Built-in printer, testo 300 XL,Gas leak detection probe,testo 300 XL,Ambient CO probe, testo 300XL
Meas. range 0 to 99.9 % 0 to 99.9 %O2 measurement
Meas. range 0 to 21 Vol. % 0 to 21 Vol. %
CO measurement (with H2 compensation)
Meas. range 0 to 8000 ppm 0 to 8000 ppm
CO2 measurement
Display range 0 to CO2max 0 to CO2max
12
Accessories
Printers and Accessories Part no.
0554 0545
0554 0569
0554 0110
0554 0424
0554 0315
0430 0143
0554 0307
Ordering data/Gas drier Part no.
Testo printer with 1 roll of thermal paper and 4 AA size batteries, Prints readings on site
Spare thermal paper for printer (6 rolls)
Recharger for printer (with 4 standard rech. batteries), Rechargeable batteries are recharged externally
Car charging adapter, ready to measure following recharging in car, Battery is recharged while travelling in car
Hose connection set, incl. silicone hose and connection adapter, For separate gas pressure measurement
Cable, 1.5 m long, connects probe with plug-in head to meas. instrument , PUR coating material
Smoke tester with oil, soot sheet, for measuring soot in flue gas
Transport and Protection Part no.
Additional Accessories and Spare Parts Part no.
0554 3371Spare particle filter for flue gas analyser (10 off)
0554 0308Filter paper to determine smoke number, 40 strips for approx. 200 measurements
0516 0301SoftCase (protects instrument from dirt and impact) made of elastic plastic, with carrier strap and magnetic plate
0516 0100Transport case (leather) for instrument, probes and accessories, Robust, spacious case made of real leather
0516 0306Aluminium case for instrument, probe and accessories, Probes in lid make it easy to find parts in case
0516 0300Transport case (plastic) for measuring instrument, probes
0516 0303Measurement case (leather) with drawers for instruments and accessories
0516 0310System case for analyser, probes and accessories
0516 0328Product line system case with small plastic boxes without contents, attachable to system case 0516 0326
0516 0329Tools system case with tools bag without contents, attachable to system case 0516 0326
0516 0331Universal system case without sections, attachable to system case 0516 0326
0632 3370Compact gas drier, basic version, For measurements with a high condensate level (manual condensate emptying)
0632 3371Compact gas drier, Comfort version, For measurements with a high condensate level and long-term measurements (automatic condensateemptying)
0554 1143Power unit for compact gas drier and flue gas analyser
0449 0034Current connection cable, connects gas drier to flue gas analyser, Supplies power to flue gas analyser via the compact gas drier power unit
0554 3370Spare particle filter for compact gas drier (5 off)
0554 1084
0440 3922
0554 3922
0390 0072
0390 0074
0390 0070
0554 0310
0409 0178
PC Software and Accessories Part no.
Power unit 230 V/ 8 V/ 1 A, for instrument (European plug), For mains operation and battery recharging
NO measuring cell, Built-in in flue gas analyser
NO measuring cell (upgrade), For subsequent installation in flue gas analyser
Spare CO measuring cell, Quick and easy replacement of measuring cell by user
Spare NO measuring cell, Quick and easy replacement of measuring cell by user
Spare O2 measuring cell
Economical software, Windows® software for data management, With convenient analysis and graphics function, online measurement andbarcode printout
RS232 cable, Connects instrument to PC (1.8 m) for data transfer
13
180 mm
Ø 8.0 mm
Ø 8.0 mm
700 mm
Ø 8.0 mm
300 mm
Ø 8.0 mm
300 mm
330 mm
Ø 10.5 mm
150 mm
300 mm
Ø 5 mm
35 mm
15 mm
60 mm
Ø 4 mm
190 mm
Ø 4.0 mm
Ø 10 mm
200 mm
Ø 20 mm
190 mm
Ø 25 mm
Additional Ordering Data for Accessories/Suitable Probes at a glance
Accessories Ordering data for testo 300 XL only Accessories Ordering Data for testo 300 L/XL Part no.
Memory extension to 400 data blocks, Saves readingsfrom up to 400 complete systems in testo 300 XL
Part no.
0440 0122
Attachable printer (securely attached) including 1 roll ofthermal paper and batteries
0554 0570
SoftCase for attachable printer (protects printer fromdirt/impact), Protects from impact and falls
0516 0411
Barcode reader to read in measurement locations,Quick and accurate allocation of reading to site
0554 0460
Barcode labels, self-adhesive (1200 off), Location mar-ked with barcode, printing via software
0554 0411
Adhesive pockets (50 off) for printout, paper barcodelabels...
0554 0116
Probes Illustration Part no.
Compact flue gas probe, 180 mm immersion depthwith probe stop, NiCr-Ni thermocouple up to +500°C,built-in independent condensate trap and particle fil-ter, 2.2 m hose
0600 9534
Compact flue gas probe, 300 mm immersion depthwith probe stop, NiCr-Ni thermocouple up to +500°C,built-in independent condensate trap and particle fil-ter, 2.2 m hose
0600 9532
Flue gas probe, 300 mm immersion depth with probestop, NiCr-Ni thermocouple up to +1000°C, built-inindependent condensate trap and particle filter, 2.2 mhose
0600 8532
Flue gas probe, 700 mm immersion depth with probestop, NiCr-Ni thermocouple up to +1000°C, built-inindependent condensate trap and particle filter, 2.2 mhose
0600 8531
Flexible flue gas probe, 330 mm immersion depth,NiCr-Ni thermocouple up to +500°C, integrated con-densate trap independent of position and particle fil-ter, 2.2 m hose (without flue draught measurement)
0600 9430
Meas. range Accuracy Conn.t99IllustrationTemperature probes Part no.
Ambient air probe, 300 mm immersion depth, withprobe stop for separate measurement of ambient airtemperature (e.g. systems with outside primary airintakes)
0600 97910 to +100 °C
Mini ambient air probe, 60 mm immersion depth, w.probe stop, magnetic clip, Tmax +100°C, for dualwall clearance temp. meas. in systems w. outside pri-mary air intakes
0600 97970 to +100 °C
Ambient air probe, immersion depth 190 mm, with probestop, magnetic clip, Tmax + 100°C, for ambient air tem-perature measurement in systems dependent on/inde-pendent of ambient air
0600 97870 to +100 °C
Mini ambient air probe, Tmax +80°C, for separateambient air temperature measurement
0600 36920 to +80 °C
Pipe wrap probe for pipes with diameter of up to 2", forflow/return temperature measurement in hydronic sys-tems
0600 4593-60 to +130°C
Fixed cableClass 2 5 s
Spare meas. head for pipe wrap probe 0602 0092-60 to +130
°CClass 2 5 s
Quick-action surface probe with sprung thermocouplestrip, for measurements on floor heating systems, radia-tors, insulations...
0604 0194-200 to +300°C
Plug-in head.connection cable0430 0143 or0430 0145 requi-red
Class 2 3 s
Meas. range Other featurest90IllustrationFor testo 300 XL only Part no.
Gas leak detection probe to detect leaks in gas hea-ting systems
0632 12460 to +10000ppm CH4
1st alarm limit: 200 ppm CH42nd alarm limit: 10,000 ppm CH4Alarm: optical display (LED) and audible signal (buzzer) triggered ifalarm limit is exceeded
2 s
Ambient CO probe to measure CO level in ambientair
0632 12470 to +500ppm CO
35 s
Dual wall clearance probe, sickle shaped supply O2probe for measuring the O2 level in the dual wall clea-rance of systems independent of ambient air
0632 1248
14
Removable control unit
Built-in printer
Stable connections forpressure and velocitymeasurement
testo 300 XXL – Top equipment for extreme maintenance requirements
testo 300 XXLUsing the testo 300 XXL meas-urement system it is possible tocarry out all measurement jobson all gas, oil and solid fuel fur-naces at highest flexibility (CO isoptional up to 30000 ppm).
The measurement system ismade up of an analysis box forflue gases and a control unitwhich also serves as a hand-heldinstrument for additional ambientmeasurements.
• Automatic CO fresh air rinse• Hot spot search during the
zeroing phase• Memory: 4000 data blocks• Built-in printer• 8 user defined function buttons• Adjustable timer with alarm
function • Touchscreen (optional) • NOX (NO, NO2) measurement
Experts are our favourite cus-tomers
...because theyknow what theyare doing. Weoffer you oursupport with ourfield-orientedtrainings onmeasurementprocedures, andon physicalcohesions.
Even more important is theexchange with other specialistsfrom your branch. After all, weare dealing with your compe-tence and your professional rou-tine when using our instruments.
By the way: 98% of our trainingparticipants fully recommend ourseminars and training.
Detlef Higgelke,Head of TestoAG Academy
15
TÜV approved flue gas probe, 180 mm immersiondepth, up to +500°C, corr. to the latest instr. test gui-delines, also for meas. on atmospheric gas systems,2.2 m hose
0600 9556
TÜV approved flue gas probe, 335 mm immersiondepth, up to +500°C, corresponding to the latestinstrument test guidelines, also for atmospheric gassystems, 2.2 m hose
0600 9557
Flue gas probe, 335 mm immersion depth incl. probestop, NiCr-Ni thermocouple up to +500°C, 2.2 m (sui-table for use with NO2 sampling)
0600 8550
Flue gas probe, 335 mm immersion depth incl. probestop, NiCr-Ni thermocouple up to +1000°C, 2.2 m(suitable for use with NO2 sampling)
0600 8552
Flue gas probe, 700 mm immersion depth incl. probestop, NiCr-Ni thermocouple up to +1000°C, 2.2 m(suitable for use with NO2 sampling)
0600 8551
Probes Part no.
testo 300 XXL analysis box, with built-in power unit, condensate trap, calibration protocol,measures temperature, flue gas dew point, flue draught, O2, CO2, CO (H2 compensa-ted), flue gas loss, efficiency, excess air
0563 0352
testo 300 XXL control unit, displays measurement data and controls the analysis box, incl.built-in printer, backlit display, temperature and pressure measurement, 1 user definedprobe socket (leak detection probe, ambient CO probe, ambient air probes), RS 232interface, data memory for 4000 data blocks
0563 0354
Cable, coiled, 2m, connects control unit and analysis box 0449 0052
Smoke tester with oil, soot sheet, for measuring soot in flue gas 0554 0307
Mini ambient air probe, 60 mm immersion depth, w. probe stop, magnetic clip, Tmax+100°C, for dual wall clearance temp. meas. in systems w. outside primary air intakes
0600 9797
Transport case for analyser, probes and accessories 0516 0351
TÜV approved flue gas probe, 335 mm immersion depth, up to +500°C, correspondingto the latest instrument test guidelines, also for atmospheric gas systems, 2.2 m hose
0600 9557
testo 300 XXL analysis box, with built-in power unit, condensate trap, calibration protocol,measures temperature, flue gas dew point, flue draught, O2, CO2, CO (H2 compensa-ted), flue gas loss, efficiency, excess air
0563 0352
testo 300 XXL control unit, displays measurement data and controls the analysis box, incl.built-in printer, backlit display, temperature and pressure measurement, 1 user definedprobe socket (leak detection probe, ambient CO probe, ambient air probes), RS 232interface, data memory for 4000 data blocks
0563 0354
Cable, coiled, 2m, connects control unit and analysis box 0449 0052
Smoke tester with oil, soot sheet, for measuring soot in flue gas 0554 0307
Mini ambient air probe, 60 mm immersion depth, w. probe stop, magnetic clip, Tmax+100°C, for dual wall clearance temp. meas. in systems w. outside primary air intakes
0600 9797
Quick-action hot wire probe, Ø 10 mm, with telescopic handle, for measurements in thelower velocity range with direction recognition
0635 1041
Transport case for analyser, probes and accessories 0516 0351
Gas leak detection probe to detect leaks in gas heating systems 0632 1246
Ambient CO probe to measure CO level in ambient air 0632 1247
TÜV approved flue gas probe, 335 mm immersion depth, up to +500°C, correspondingto the latest instrument test guidelines, also for atmospheric gas systems, 2.2 m hose
0600 9557
°C, m/s, %RH, hPa, CO, CO2, rpm,mA
Part no. 0563 0354
testo 300 XXL control unit, displaysmeasurement data and controls theanalysis box, incl. built-in printer, back-lit display, temperature and pressuremeasurement, 1 user defined probesocket (leak detection probe, ambientCO probe, ambient air probes), RS232 interface, data memory for 4000data blocks
testo 300 XXL Control unit
O2, CO2, °C, CO, (NO), (NO2)
Part no. 0563 0352
testo 300 XXL analysis box, with built-in power unit, condensate trap, cali-bration protocol, measures tempera-ture, flue gas dew point, flue draught,O2, CO2, CO (H2 compensated), fluegas loss, efficiency, excess air
testo 300 XXL analysis box
NO measuring module, 0 to 3000 ppm, built into ana-lysis box 0440 3935
Power unit 230 V/ 8 V/ 1 A, for instrument (Europeanplug), For mains operation and battery recharging 0554 1084
NO2 measuring module, built into analysis box 0440 3926
CO solid fuel measurement set consisting of gas pre-paration, strong pump and measuring range extensionmodule
0440 0567
CO solid fuel measurement upgrade (available fromservice point) 0554 0567
Touch screen with pen (available only with originalorder) 0440 0559
Cable, coiled, 2m, connects control unit and analysisbox 0449 0052
Hose connection set, incl. silicone hose and connec-tion adapter 0554 0315
Pressure drop test set 200 mbar, incl. manual bulbpump, hoses, T-fitting with valve, conical test stopper 0554 3153
High pressure test pump (for test pressures greaterthan 500 mbar) 0554 3157
Spare thermal paper for printer (6 rolls) 0554 0569
Transport and Protection Part no.
Software and Accessories Part no.
Accessories and Spare parts Part no.
Carrying strap set for analysis box and hand-held ana-lyser 0440 2545
Measurement case (leather) with drawer for analysersand accessories 0516 0307
Configuration and adjustment software for instrumentprogramming/set-up 0554 0507
PC analysis software for producing graphs, charts,diagrams, tables and for customer data management 0554 0508
RS232 cable 0409 0178
Technical data
O2 measurement
CO2 measurement 0 to CO2
0 to +25 Vol. %
CO measurement (H2 comp.)
Efficiency 0 to +120 %
0 to +10000 ppm
NO measurement (optional)
delta P 1
0 to +500 ppm
0 to +3000 ppm
Draught
Temperature measurement -40 to +1200 °C
delta P 2
Flue gas loss (qA) -20 to +99.9 %
NO2 meas. (optional)
See the testo 300 XXL brochure and www.testo.de for more information.
Recommended Set: testo 300 XXL, Basic Set for Installation
and Customer Service
Recommended Set: testo 300 XXL, Comfort Set for Installa-
tion, Customer Service, Damage Assessment/Analysis
-40 to +40 hPa
±1000 hPa
±80 hPa
16
Case
Printer
Readings documentation
The readings are sent to theTesto printer by infrared. We alsohave an additional attachableprinter for the testo 300 XL.
Case system
• The attachable case systemespecially for contractorsmakes it easy to transport allyour equipment
• The system case, particularlyrobust, made of ABS plastic,with foam inserts
• Unlimited extension possibilitieswith the Testo case system
Qualification
Heating MeasurementEngineering Qualification forHeating Fitters and ServiceEmployees.
Please ask us for moreinformation.
Common Accessories and Qualification
Testo printer with 1 roll of thermal paperand 4 AA size batteries
testo 575 fast printer, incl. 1 roll of ther-mal paper and batteries, Infrared thermalline printer with graphics function
Part no. 0554 0545
Part no. 0554 1775
System case for measuring instrument,probe and accessories, easily attachedto other system cases
Part no. 0516 0326
Tools system case with tools bagwithout contents, attachable to systemcase 0516 0326
Part no. 0516 0329
Product line system case with smallplastic boxes without contents, atta-chable to system case 0516 0326
Part no. 0516 0328
Universal system case without sec-tions, attachable to system case 05160326
Part no. 0516 0331
Measuring instruments for your safety
Temperature
Pressure
Endoscopy / Wood moisture
Indoor Air Quality
testo 905-T2 Page 18
Installation andSafety
Measuring Instruments for Installation
testo 925 Page 18
Differential temperature measurement – At aglance
Daily temperature measurement – Easy androbust
Surface temperature measurement
testo 935 Page 19
Non-contact temperature measurement – Fastand clean testo 825-T2 Page 19
Detector for leaks on natural gas pipes testo 316-1 Page 25
Flue gas spillage detector for detecting esca-ping flue gas testo 317-1 Page 25
CO warning measurement – For your safety testo 315-2 Page 26
Versatile CO measurement – For safety and ser-vice testo 315-1 Page 27
2 in 1 temperature measurement – Non-contactor direct testo 825-T4 Page 20
Monitoring room temperature – Efficiently testo 174 Page 20
Monitoring temperature – Long-term andwithout interruption testo 175-T3 Page 21
Fiberscopes – For fast diagnoses testo 318-S Page 24
Pressure measurement – Ideal for field use, effi-cient and accurate testo 506 Page 21
Pressure measurement for gas and water instal-lation testo 312-2/-3 Page 22
Complete test system for gas and water instal-lation Test system Page 23
Compact wood/material moisture meter testo 606 Page 24
18
Checking flow temperature
TopSafe protects againstdirt and water
The testo 905-T2 measurementstick measures surface tempera-tures up to 500°C fast and effi-ciently. The sprung, wide thermo-couple measuring headguarantees a very quick reactiontime and a high accuracy level.
testo 905-T2
Measuring surface temperature e.g. in a radiator
With flexible joint
Flexible measuring head
Daily temperature measurement – Easy and robust
Surface temperature measurement
• User-friendly operation
• Easy-to-read
• Super fast measurement
• Auto Off function
Affordable and robust. The testo925 versatile thermometer is idealfor tough applications during dailytemperature measurements.
testo 925 • Hold button for freezing reading
• Large easy-to-read display
• TopSafe case protects from dirt,water and impact (optional)
Part no. 0560 9052
Surface temperature measurementstick with spring loaded probe, incl.multi-function clip, battery
testo 905-T2
Part no. 0560 9255
testo 925, thermometer, incl. batteryand calibration protocol
testo 925
Technical data
Meas. range
Battery life 150 h
-50 to +350 °C Short-term to +500°C
Technical data
Probe type
Meas. range -50 to +1000 °C
Battery life 150 h
Dimensions 190 x 57 x 42 mm
Weight 300 g
Type K (NiCr-Ni)
Ordering data for Accessories
TopSafe (protection case) with bench stand
Part no.
Suitable probes at a glance
Quick-action surface probe with sprung thermocouplestrip, for measurements on floor heating systems, radi-ators, insulations...
Part no.
0516 0186
0602 0392
19
Ordering data for Accessories
Non-contact surface temperature measurement e.g. ina radiator
Water-tight and robustinside TopSafe (IP 67) andholder
With laser sighting
Differential temperature (flow/return) measurement
Data documentation prin-ted on site (optional)
The testo 935 differential ther-mometer measures the tempera-ture values of two probes simul-taneously. In this way, you canmeasure the temperature differ-ence between flow and return ina heating boiler. The large two-line display shows both valuesand the differential value can becalled up.
testo 935
Differential temperature measurement – At a glance
Non-contact temperature measurement – Fast and clean
• 2 probes can be connected
• Display: T1, T2 and differentialtemperature
• Button to hold readings and callup min and max values
• TopSafe case protects from dirt,water and impact (optional)
Part no. 0560 9350
Thermometer, incl. battery and calibra-tion protocol
testo 935
The compact, fast responseinfrared thermometer testo 825-T2 accurately measures surfacetemperatures up to 400°C, forexample, at difficult to accesspoints.
testo 825-T2 • Laser sighting
• Emissivity adjustable from 0.20to 1.00
• Acoustic alarm sounds whenlimit is exceeded
• Wall/belt holder to quickly posi-tion instrument
Part no. 0560 8256
Infrared thermometer with laser sigh-ting and audible alarm, incl. TopSafeand wall/belt holder
testo 825-T2
Technical data
Meas. range -50 to +1000 °C
Battery life 150 h
Dimensions 190 x 57 x 42 mm
Weight 300 g
Technical data
Meas. range -50 to +400 °C
Measurement spot 1/3
Battery life 20 h
Dimensions 184 x 43.4 x 19 mm
Weight 80 g
Adhesive tape e.g. for polished surfaces (roll, 10 mlong, 25 mm wide), E = 0.93, temperature resistant upto +300°C
Part no.
Ordering data for Accessories
TopSafe (protection case) with bench stand
Part no.
Suitable probes at a glance
Pipe wrap probe for pipe diameter 5 to 65 mm, with exchange-able measuring head. Measuring range short-term to +280°C
Waterproof immersion/penetration probe
Part no.
Transport case (plastic) for instrument and accessories
0554 0051
0516 0183
0602 4592
0602 1292
0516 0184
20
Logging room temperature with immediate alarm dis-play if limits are exceeded
Temperature measurement on a non-smooth radiatorusing a self-adapting, flexible measuring head and non-contact measurement on a radiator
Monitor ambient temperature – Efficiently
2 in 1 temperature measurement – Non-contact or direct
Large display
Data transfer to PC ornotebook via interface(optional)
The testo 825-T4 infrared andcontact thermometer can meas-ure surface temperatures up to+400°C quickly and without con-tact or accurately by contact.The contact side is equippedwith a fast response sprungmeasurement head for shiny, re-flecting or uneven surfaces butalso for objects with unknownemissivities. The direct referencemeasurement with the infraredthermometer makes it possible todetermine and adjust the emis-sivity required for the infraredmeasurement.
testo 825-T4 • All the advantages of testo 825-
2
• Infrared and contact measure-ment in one instrument
• Emissivity adjustable to contactmeasurement
• Auto-Off function
The testo 174 mini data logger canmeasure room temperatures overlonger periods of time which means itcan be used to monitor the controlbehaviour of a thermostat valve. Thecurrent reading is shown in the dis-play. The following can be called up:Stored minimum and maximumvalue, limit values and battery life.
testo 174• Accurate, efficient temperature
logging with up to 3900 read-ings
• Alarm display if user definedmaximum/minimum values areexceeded
• Software for data export, dataanalysis and parameterisation(optional)
• Data secure even if battery isspent
Part no. 0560 8258
Infrared and contact thermometer withsighting laser and alarm, incl. TopSafeand wall/belt holder
testo 825-T4
Part no. 0563 1741
Temperature mini data logger, 1 chan-nel, incl. wall holder, lock and battery
testo 174
Part no. 0563 1742
Temperature mini data logger, 1 chan-nel, ComSoft 3 Basic, wall holder, lock,interface incl. PC connection cable,battery
testo 174, Starter Set
Technical data
Technical data
Infrared thermometer
Meas. range
Meas. spot Ø/Distance 1/3
-50 to +400 °C
Meas. range -30 to +70 °C
Dimensions 55 x 35 x 14 mm
Weight 24 g
Measuring rate 1 min to 4 h (selectable)
Datamemory
3900 readings
Battery life 500 days (typical)
Analysissoftware
MS Windows 95b / 98 /ME / NT4-Sp4 / 2000 /XP
Contact thermometer
Battery life 20 h
Dimensions 184 x 43.4 x 19 mm
-50 to +250 °C
21
Switchable measurement range; gas flow pressure andflue draught measurement
Electronic U-tube mano-meter
Inspects flow/return temperature
Data is sent to PC ornotebook via attachableinterface (optional)
Monitor temperature – Long-term and uninterrupted
Pressure measurement – Practical, efficient and reliable
The 175-T3 temperature data log-ger logs temperature at 2 differentpoints simultaneously over aperiod of several days, weeks oreven months. In this way you can,for example, check the tempera-ture spread between the flow andreturn of a heating system over alonger period of time.
testo 175-T3• Temperature logging with up to
16000 readings
• Alarm display when userdefined maximum/minimum val-ues have been exceeded
• Software for data analysis andparameterisation (optional)
The mini differential pressuremeter is ideally suitable for allpressure measurements whenadjusting heating boilers. Itswitches over the measurementrange automatically. It measuresthe flue gas draught or the differ-ential pressure of the combustionchamber compared to the envi-ronment with the very high accu-racy level of the lower measure-ment range, all other pressureswith the upper measurementrange. One-touch operation. Themagnet in the rear wall of thehousing and the suspension loopfacilitate easy attachment. Yourhands are then left free for adjust-ment work.
testo 506• Automatic measurement range
switchover 10 / 200 hPa/mbar
• 5 switchable units: hPa/mbar,mmH2O, mmHg, inH2O, psi
• Magnet holder and suspensionloop
• Soft rubber casing protectsagainst impact
• 4/6 mm hose connections
Part no. 0563 1756
2 channel temperature data logger,wall holder and calibration protocol
testo 175-T3
Part no. 0560 5063
0 to 10/200 hPa/mbar
Differential pressure meter, incl. con-nection hoses and battery
testo 506
Technical data
Meas. range
Battery life 150 h
0 to +10 hPa
Dimensions 86 x 48 x 24 mm
Weight 55 g
+10 to +200 hPa
Meas. range -50 to +400 °C
Analysissoftware
MS Windows 95b /98 / ME / NT4-Sp4 /2000 / XP
Datamemory
16000 readings
Dimensions 82 x 52 x 30 mm
Weight 90 g
* At a measuring cycle of 15 min (-10 to +50°C)
Measuring rate 10 s to 24 h
Battery life > 2.5 years*-50 to +1000 °C
Ordering data for Accessories
testo 575 fast printer, incl. 1 roll of thermal paper and batteries 0554 1775
Lock for wall holder for testo 175/177 data loggers 0554 1755
ComSoft 3 - Basic Set with RS 232 interface for testo 175 0554 1759
Spare thermal paper for printer (6 rolls), Measurement datadocumentation legible for up to 10 years 0554 0568
Part no.
Suitable probes at a glance
Pipe wrap probe for pipe diameter 5 to 65 mm, with exchange-able measuring head. Measuring range short-term to +280°C 0602 4592
Part no.
Ordering data for Accessories
Connection hose, silicone, 5m long , Max. load 700hPa (mbar)
0554 0440
Pressure connection hose, single, diameter: 4/6 mm,50 cm long, without connection adapter
0554 0449
Pressure set with flue draught probe, includes 2 x sili-cone hoses each with Ø 4mm and Ø6mm, 4mm and6mm T-piece, connecting piece
0554 3150
Part no.
Technical data
22
Differential pressure measurement on heating units
215 mm
Ø 5 mm
Printout
With alarm function
Pressure measurement for gas and water installation
The testo 312-2 and 3 manome-ters are DVGW approved andcorrespond to TRGI for all pres-sure adjustments and pressureinspections on gas heating boil-ers. Use the testo 312-2 preci-sion manometer to check fluegas draught, differential pressurein the combustion chamber com-pared with ambient pressure orgas flow pressure with high reso-lution. Fine pressures with a reso-lution of 0.01 hPa can be meas-ured in the range from 0 to 40hPa. The versatile testo 312-3pressure meter facilitates fast andefficient preliminary and maintests on gas and water pipelinesup to 6000 hPa (6 bar).
testo 312-2/-3• Switchable mesuring ranges,
ideal resolution
• Compensation of temperaturecontrolled reading deviations
• Alarm display when userdefined limit values areexceeded
• Clear display with time
0632 0314
Precision manometer up to 40/200hPa, DVGW approval, incl. alarm dis-play, battery and calibration protocol
testo 312-3
Up to 40/200 hPaVersatile pressure meter up to300/6000 hPa, DVGW approval, incl.alarm display, battery and calibrationprotocol
Up to 300/600 hPa
testo 312-2
TopSafe (protection case), with bench stand, Protects instru-ment from dirt and impact
Magnetic bench stand suitable for TopSafe 0516 0443, Forpositioning on boilers, for example
0516 0443
Pressure set with flue draught probe, includes 2 x sili-cone hoses each with Ø 4mm and Ø6mm, 4mm and6mm T-piece, connecting piece
0554 3150
0554 0407
Case, For secure storage of measuring instrument 0516 0191
Transport case (plastic), For transport and secure storage ofmeasuring instrument and accessories 0516 3120
9V rechargeable battery for instrument, Instead of battery 0515 0025
Recharger for 9V rechargeable battery, For external rechargingof 0515 0025 battery 0554 0025
Testo printer with 1 roll of thermal paper and 4 AA sizebatteries, Prints readings on site 0554 0545
Recharger for printer (with 4 standard rech. batteries),Rechargeable batteries are recharged externally 0554 0110
Spare thermal paper for printer (6 rolls) 0554 0569
Spare thermal paper for printer (6 rolls), Measurement datadocumentation legible for up to 10 years 0554 0568
Pressure transmitter 1-1000 mbar to measure pressure in filledwater pipelines 0554 3168
Pressure transmitter 1-6 bar to measure pressure in filled waterpipelines 0554 3159
Connection hose for pressure transmitter to system (1 off) 0554 3170
Part no.
Part no.
Suitable probes at a glance Part no.
Part no.
0632 0313
Printers and Accessories
Additional Accessories and Spare Parts
Transport and Protection
Technical data testo 312-2
Meas. range -40 to +40 hPa -200 to +200 hPa
Resolution
Overload
0.01 hPa
±1000 hPa ±1000 hPa
0.1 hPa
Accuracy ±1.5% of mv (+3 to +40hPa)±0.03 hPa (0 to +3 hPa)
±0.5 hPa (0 to +50 hPa)±2 hPa (+50 to +200 hPa)±1 digit
Technical data testo 312-3
Meas. range -300 to +300 hPa -6000 to +6000 hPa
Common data testo 312-2/-3
Dimensions
Weight
215 x 68 x 47 mm
300 g
Resolution
Overload
0.1 hPa
±8000 hPa ±8000 hPa
1 hPa
Accuracy ±0.5 hPa (0 to +50 hPa)±1.5 hPa (+50 to +300 hPa)
±2% of mv (+400 to +2000hPa)±4% of mv (+2000 to+6000 hPa)±4 hPa (0 to +400 hPa)
±1 digit
Part no.Part no.
23
Pressure test on water pipes (3-5 bar test pressure)
Display with reading
Printout with date
Complete test systems for gas/water fitters
Assurance when purchasing“Often, interested customers do not expect a visit from me fol-lowing consultation by telephone. If a customer gets to see the instrument itgives him maximum assurance when making the decision to buy.”
Uwe BeckerHead of Customer Center, Southwest Germany
Everything you need to inspectgas and water pipeline installa-tions: Check pressure drop usingthe testo 312-3 electronic pres-sure meter. The measurementresults are output on the printer.Using the slide rule, you canquickly determine the amount ofgas leaking and thus the service-ability of the gas pipelines. A gasleak is quickly detected by testo316-1.
Testing system set • Pre and main test on gas
pipelines
• Pressure check on waterpipelines
• Fast detection of amount ofleaking gas
• Efficient leak detection
Ordering data for Accessories
Pressure drop test set 200 mbar, incl. manual bulb pump,hoses, T-fitting with valve, conical test stopper 1/2"
0554 3153
High pressure test pump (for test pressures greater than 500mbar)
0554 3157
Single-pipe counter cap, connects test fittings to pipe, Simplydismantle gas counter, attach single-pipe counter cap and con-nect hose
0554 3156
Two-valve branch (brass) to connect 2 or more pipes, can beblocked off separately
0554 3161
Single-valve stop to block off pipe, e.g. when changing hosesduring a test
0554 3162
LW 6 connection hose, To connect T-fitting/single-pipe countercap or for extension purposes
0554 3158
Conical test plug 1/2" to connect test fittings to gas pipe,Connects test fittings to pipe
0554 3151
Conical test plug 3/4" to connect test fittings to gas pipe,Connects test fittings to pipe
0554 3155
Conical test stop 1" to connect test fittings to gas pipe,Connects test fittings to pipe
0554 3152
High pressure stage stop 3/8" and 3/4", To connect test fittingsto gas pipe
0554 3163
High pressure stage stop 1/2" and 1", To connect test fittings togas pipe
0554 3164
Leak detection spray, To detect leaks (bubbles appear) in gaspipes
0554 3166
System case for the complete test system, Ensures orderly sto-rage of case contents
0554 3165
Slide rule to quickly determine serviceability 0554 3169
DKD calibration certificate/Pressure, Differential and positivepressure; 6 measuring points distributed over meas. range (>0.6% of full-scale value)
0520 0225
Part no.
High pressure set with case (without instrument)
Pressure drop test set, 200 mbar
Testing pump, greater than 500 mbar
Single-pipe counter cap
Two-valve T-fitting
Single-valve barrier
Connection hose LW
Conical test plugs 1/2" and 3/4"
High pressure stage stop 3/8", 1/2",3/4", and 1"
Leak detection spray
System case
Please order the testo 312-3 or testo 312-2 instrument suitable for yourrequirements (see opposite page)
Part no. 0554 3160
Testing system set
testo 312-3 pressure meter
TopSafe for testo 312
Printer
testo 316-1 gas leak detector
TopSafe for testo 316-1
Accessories: Tightness set 200mbar, testing pump, single-pipecounter cap, two valve T-fitting, sin-gle valve barrier, connection hose
LW 6, conical test plugs 1/2", 3/4",high pressure stage stops 3/8",3/4", 1/2", 1", leak detection spray,slide rule, system case
Part no. 0563 0314
24
Compact wood/material moisture meter
The compact testo 606 moisturemeter is very user-friendly. Simplyremove protective cap, placemeasuring electrodes in thebuilding material - finished:
- Wood moisture measurement
- Measurements on buildingmaterials e.g. plaster, flooring...
• Moisture scale (6 to 44%) forwood and building material
• Protection cap with clip - testo606 is always ready to hand
• Automatic instrument and bat-tery test
Fast and easy measurement of material moisturePart no. 0560 6061
Inspecting a hard to reach point in a heating system
Halogen illumination
With mirror
Fiberscopes – For fast diagnosis
914 mm long, Ø 10 mm
testo 318-1
Service Warranty
Authentic quality: one of Testo´s major claims. Warranties of upto 3 years are proof of our lasting quality - this thoroughness has made us one ofthe leading manufacturers in the world.
Jörg WittemerHead of Customer Service
The fiberoptic testing tools fromthe testo 318 series provide youwith a clear picture of difficult-to-access points. Dark areas are illu-minated by the built-in halogenlight and the high powered lensfocuses on objects as close as19 mm (3/4”). The lens and probeshaft can be immersed in liquidswithout worry.
testo 318• Thin flexible probe shaft
• Easy one-hand operation
• Clip-on 45° mirror (optional)
• For inspections in seconds
Part no. 0632 0318
457 mm long, Ø 10 mm
testo 318-2
Part no. 0632 0319
Technical data testo 318-1/-2 S
Number of imagepoints (fibres)
40°
6,000
testo 318-1/-2/-6
40°
Min. focussing distance
Viewing field
19 mm 19 mm
Probe diameter 6 mm 10 mm
Max. bending radius 203 mm 203 mm
Light source Halogen lamp (3220 K) Halogen lamp (3220 K)
6,000
Fiberscope, probe: 914 mm long/Ø 10mm, halogen light, batteries
Fiberscope, probe: 457 mm long/Ø 10mm, halogen lamp, batteries
914 mm long, Ø 6 mm
testo 318-1 S
Part no. 0632 3181
457 mm long, Ø 6 mm
testo 318-2 S
Part no. 0632 3182
Fiberscope, probe: 914 mm long/Ø 6mm, halogen light and batteries
Fiberscope, probe: 457 mm long/Ø 6mm, halogen lamp and batteries
Ordering data for Accessories
Spare halogen lamp, Extremely powerful for optimum illumina-tion, even in dark areas
0213 0017
Clip on 45° mirror, Ø 10 mm, For inspections at hard to accesspoints
0554 1320
Attachable clip incl. magnet, Ø 10 mm, e.g. for quickly gathe-ring small, loose metal parts in ducts, shafts etc.
0554 1321
Attachable clip incl. magnet, Ø 6 mm e.g. for fast collection ofsmall, loose metal parts in ducts, shafts etc. 0554 1324
Clip on 45° mirror, Ø 6 mm, For visual inspections at hard-to-access points
0554 1325
Part no.
1830 mm long, Ø 10 mm
testo 318-6
Part no. 0563 3186
Complete 318-6 Kit consisting of fiberscope, probe: 1830 mm long/Ø 10 mm,halogen lamp, clip-on 45° mirror, attachable clip with magnet, spare lamp, batte-ries and hard shell case
25
Establishes if flue gases have been drawn off comple-tely from the burner
Flue gas spillage detector
Detector for leaks in natural gas pipes
The testo 316-1 gas leak detectorquickly detects even the smallestleaks.
testo 316-1
• Bendable measurement probefor inaccessible pipes
• Optical and audible alarm if limitvalue is exceeded
• TopSafe case protects from dirtand impact (optional)
Ordering data for Accessories
TopSafe (protection case) with bench stand, Protects instru-ment from dirt and impact
0516 0189
Case for instrument and probes, For safe and orderly storage 0516 0182
Transport case (plastic), For transport and secure storage ofmeasuring instrument and accessories
0516 3120
Accessories set (for instrument without TopSafe) includes multi-function clip, carrier loop, probe holder
0554 0550
Part no.
Part no. 0632 0316
Electronic gas leak detector with flexi-ble probe, battery included
testo 316-1
Technical data
Meas. range 0 to 10000 ppm CH4
1st alarm limit From 200 ppm CH4
2nd alarm limit 10000 ppm CH4
Battery life 5 h
Dimensions 190 x 57 42 mm
The testo 317-1 spillage detectorefficiently locates escaping heat-ing flue gases. The practicalinstrument immediately gives offan optical and acoustic alarmmaking a visual inspection unnec-essary. The bendable probemakes it ideal for use at hard-to-access points.
testo 317-1 • Reliable detection of leaking flue
gases
• Bendable measurement probefor inaccessible points
• Audible and visual alarm
Part no. 0632 3170
Spillage detector with flexible probe,incl. battery
testo 317-1
Technical data
Reaction time
Length of probe pipe 200 mm
Diameter/Probe pipe tip Ø 10 mm
Dimensions 128 x 46 x 18 mm
Weight 300 g
2 s
Checks for leaks in domestic gas pipes
TopSafe case protectsfrom dirt and impact(optional)
26
Part no.
Calibration Certificates Part no.
Safe CO level check
With printout
CO zeroing in contamina-ted room
CO warning measurement – For your safety
Use testo 315-2 to check the COlevel in ambient air. Even low con-centrations of the highly poison-ous gas are detected. In this way,you can judge whether theburner flue gases are being fullydrawn off.
testo 315-2 • Reliable CO warning
• Adjustable alarm limits
• Audible and visual alarm
• Automatic zero point adjust-ment
• Data printout on site (optional)
• TopSafe case protects from dirt,water and impact (optional)
Part no. 0632 0317
CO warning instrument, with batteryand calibration protocol
testo 315-2
CO flue gas probe to measure CO in flue gas, with exchangea-ble NOx filter and pressure reducer
0554 3154
9V rechargeable battery for instrument, Instead of battery 0515 0025
Recharger for 9V rechargeable battery, For external rechargingof 0515 0025 battery
0554 0025
TopSafe (protection case), with bench stand, Protects instru-ment from dirt and impact
0516 0443
Magnetic bench stand suitable for TopSafe 0516 0443, Forpositioning on boilers, for example
0554 0407
Multi-function clip (for instrument with TopSafe) consisting ofmulti-function clip and magnetic holder
0554 0398
Spare particle filter (10 off), For CO flue gas probe 0554 0040
Filter granulates (refill set) to renew NOX filter in CO flue gasprobe
0554 3167
Testo printer with 1 roll of thermal paper and 4 AA sizebatteries, Prints readings on site
0554 0545
Recharger for printer (with 4 standard rech. batteries),Rechargeable batteries are recharged externally
0554 0110
Spare thermal paper for printer (6 rolls) 0554 0569
Spare thermal paper for printer (6 rolls), Measurement datadocumentation legible for up to 10 years
0554 0568
Case, For secure storage of measuring instrument 0516 0191
Transport case (plastic), For transport and secure storage ofmeasuring instrument and accessories
0516 3120
ISO calibration certificate/Flue gas , Calibration points 2.5% O2;100 and 1000 ppm CO; 800 ppm NO; 80 ppm NO2; 1000ppm SO2
0520 0003
ISO calibration certificate/CO, CO probes; calibration points 0;80 ppm
0520 0039
Part no.
Part no.
Technical data
Meas. range
Alarm limits 50/100/500 ppm
50/100/500 ppm
Accuracy ±10 ppm CO (0 to +100 ppm CO)±10% of mv (+100 to +2000 ppm CO)
Resolution 1 ppm CO
Zero point adjustment Automatically when switched on
Dimensions 215 x 68 x 47 mm
Weight 400 g
0 to +2000 ppm CO
Transport and Protection
Printers and Accessories
Additional Accessories and Spare Parts
27
Checks gas flow pressure
Parallel CO alarm
395 mm
215 mm
Ø 5 mm
Versatile CO measurement – For safety and service
The testo 315-1 provides youwith all the measurement func-tions needed to service gas heat-ing systems. While measuringdraught, pressure difference,temperature or ionisation current,the instrument can also simulta-neously show the CO level in theambient air. In this way, youalways have the system´s safetyunder your watchful eye.
testo 315-1 • Efficient CO warning
• Three alarm limits are user-defined
• Audible and visual alarm
• Automatic zero point adjust-ment
• Two temperature inputs to com-pare the flow and return tem-perature
• Compensation of temperature-related reading deviations
• TopSafe case protects from dirt,water and impact (optional)
Part no. 0632 0315
CO warning and servicing instrumentfor gas heating systems with batteryand calibration protocol
testo 315-1
Ordering data for Accessories
9V rechargeable battery for instrument, Instead of battery 0515 0025
Recharger for 9V rechargeable battery, For external rechargingof 0515 0025 battery
0554 0025
TopSafe (protection case), with bench stand, Protects instru-ment from dirt and impact
0516 0443
Magnetic bench stand suitable for TopSafe 0516 0443, Forpositioning on boilers, for example
0554 0407
Testo printer with 1 roll of thermal paper and 4 AA sizebatteries, Prints readings on site
0554 0545
Transport case (plastic), For transport and secure storage ofmeasuring instrument and accessories
0516 3120
Part no.
Suitable probes at a glance
CO flue gas probe to measure CO in flue gas, withexchangeable NOx filter and pressure reducer
0554 3154
Cables for measuring ionisation current (2 off) incl.clamp testing tips, cable 1 m long
0554 0551
Pipe wrap probe with Velcro strip, for temperaturemeasurement on pipes with diameter up to max.120 mm, Tmax +120°C
0628 0020
Pressure set with flue draught probe, includes 2 xsilicone hoses each with Ø 4mm and Ø6mm, 4mmand 6mm T-piece, connecting piece
0554 3150
Part no.
Technical data
Accuracy ±10% of mv(+100 to +2000ppm CO)±10 ppm CO (0to +100 ppmCO)
±0.5 hPa (-49.9 to +49.9hPa)±1.5 hPa (-200to -50 hPa)±1.5 hPa (+50to +200 hPa)
±1.5% of mv (-40 to -3 hPa)±1.5% of mv(+3 to +40hPa)±0.03 hPa (-2.99 to +2.99hPa)
±0.5% of mv(+100 to +600°C)±0.5 °C (0 to+99 °C)
Resolution 0.01 hPa (-40to +40 hPa)
0.1 °C (-40 to+600 °C)
0.1 hPa (-200to +200 hPa)
Battery type 9V block battery
Battery life 16 h
Oper. temp. +5 to +45 °C
Material/Housing ABS
Display LCD, 2 lines
Storage temp. -20 to +50 °C
215 x 68 x 47 mm
400 g
Dimensions
Weight
Meas. range 0 to +2000ppm CO
-200 to +200hPa
-40 to +40 hPa -40 to +600 °C
±1 digit
-100 to+100 µA
±3 µA (-100to +100 µA)
1 µA (-100 to+100 µA)
1 ppm CO (0to +2000 ppmCO)
28
Additional documentation isavailable on Heating, AirConditioning and Ventilation:
Total Testo Commitment
Electronic ManifoldsMeasurement Engineeringfor AC and Ventilation
Complete Reference Measure-ment for Heating Units
Practical HandbookHeating Measurement
Sub
ject
to c
hang
e w
ithou
t not
ice