Download - Metal casting process
![Page 1: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/1.jpg)
![Page 2: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/2.jpg)
PREVEIW
• What is Metal casting ?• It is the industry of pouring liquid metal into a mold to achieve a desired shape.
![Page 3: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/3.jpg)
INTRODUCTION (Contd)
• Almost all metals can be cast.• The challenge in casting is to produce products
(casts) that are of• the desired composition, free from defects,
and meet• requirements for strength, dimensional
accuracy and surface finish.
![Page 4: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/4.jpg)
Metal Casting
• Create liquid metal - Melting– Combustion used to melt material– Electricity used to melt material
• Create solid shape - Casting– Permanent mold casting – Semi Permanent mold casting– Consumable mold casting
![Page 5: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/5.jpg)
DIE CASTING VS FOUNDRY
• Die casting is a variation of metal casting• Liquid metal injected into reusable steel mold,
or die, very quickly with high pressures• Reusable steel tooling and injection of liquid
metal with high pressures differentiates die casting from other metal casting processes
![Page 6: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/6.jpg)
• PROCESS CHART
![Page 7: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/7.jpg)
CURRENT USE OF CASTINGS
• Cars• Appliances• Office equipment• Sporting goods• Machinery• Toys• Many other applications
![Page 8: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/8.jpg)
CASTING PROCESS• A liquid conforms to the shape of the vessel that holds it:
this is the fundamental principle underlying all metal casting processes.
• The casting process basically involves: (a) Pouring molten metal into a mold patterned after the
part to be manufactured which extract heat.• (b) Allowing it to cool.• (c) Removing the metal from the mold.• Important considerations in casting operations
are as follows: The flow of the molten metal into the mold cavity The solidification and cooling of the metal in the mold The influence of the type of mold material
![Page 9: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/9.jpg)
Sand Casting Explained
The five basic steps in Foundry work / Sand Casting:1. Patternmaking2. Coremaking3. Molding or mould making4. Melting and Pouring5. Cleaning and fettling6. INSPECTION
Foundry work involves all or some of the processes illustrated in the following flowchart
![Page 10: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/10.jpg)
PATTERN MAKING• It is the first step to prepare a model-
Pattern.• Pattern is the replica of feminine model of
final casting. It Differs in number of respects from
resulting castings. Mostly patterns are made of wood , as it is
very cheap and good workability. For higher durability and strength, patterns
are made from brass , Al, Mg alloy.
![Page 11: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/11.jpg)
Pattern making - TYPES
• 1. SOLID PIECE PATTERN
2. SPLIT PIECE PATTERN
• 3. LOOSE PIECE PATTERN
• 4. GATED PATTERN
![Page 12: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/12.jpg)
Pattern Materials• Wood : White Pine is favourite wood, Straight
grained , light weight, Easy to work • Eg : Cherry, Beech, Bass wood etc• Metal : used for production work. Abilty to
withstand. Do not change their shape when subjected to moist conditions.
• Polystrene: Consumable pattern. Molten metal vaporises the pattern.Best suited for cases where it is difficult or impossible to draw the pattern.
![Page 13: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/13.jpg)
PATTERN ALLOWANCES• To produce a casting of proper size and
shape and depend partly on product design, Mould design, Shrinkage, contraction etc of the metal being cast.
• Shrinkage allowance: Positive allowance• Finishing allowance: Positive allowance• Draft Allowance: Positive alowance• Distortion allowance: Positive allowance• Shake allowance: Negative allowance
![Page 14: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/14.jpg)
MOULDING SAND
• Principal Raw material used in Moulding is Moulding Sand•Main constitutents are Silica,
Alumina, Iron Oxide and small amount of oxides Ti, Mn, Ca and some alkaline compounds.
![Page 15: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/15.jpg)
TYPES OF MOULDING SAND• Natural Sand : It is also called Green sand
collected from Natural Resources• Tempered sand• It contains water as only binder• Sand is found on the banks of river and ponds.• SYNTHETIC SAND:• Artificial sand obtained by mixing relatively
sand, binder(water+ bentonite) and other material requird.
![Page 16: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/16.jpg)
MOULDING SAND• The chief constituent are• Silica and clay• Silica is 80-90%, Silicon dioxide (refractoriness,
resistivity , Permeability)• Clay – 8-10% It imparts bonding strength to moulding
sand .Too much of clay causes cracking of materials.• Additives: Coal Dust – used in sand• Saw dust reduces expansion defect increase surface
finish• moisture
![Page 17: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/17.jpg)
• Sand Terminology• Green Sand: Tempered well prepared
foundry sand• Dry Sand: Original having excess moisture.• Facing sand: Facing sand forms the face of
the mould.• Parting Sand: Sand is sprinkled on
thepattern and on the mould surface., so that one mould flask doesn’t stick with one another.
![Page 18: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/18.jpg)
Properties of Moulding Sand• PERMEABILTY: depends upon size, shape,
compactness, moisture content, bonding• COHESIVENESS.
ADHESIVENESSREFRACTORINESSCOLLAPSIBILITY.
•
![Page 19: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/19.jpg)
Types of moulds• Green sand mould• Skin Dried Mould• Dry sand mould• Air Dried Mould
![Page 20: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/20.jpg)
Type of moulds• Green Sand Mould : It is the condition of sand
when molten metal is poured. Molten metal is poured immediately after it is ready.
• Permeability is high and good.• Skin Dried mould: The surface is dried to a
depth of 12.5 to 25mm depth by means of hot air, infra red lamp.
• Suitable binder like resin , linseed oil molasses is added to provide hard surface.
• \
![Page 21: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/21.jpg)
• Dry Sand Moulds: Moulds are made from fine grained and mixed binders and additives. Baked in the oven
• Stronger Harder but less permeability.
• Air Dried mould:• It is exposed to air for considerable time.
![Page 22: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/22.jpg)
![Page 23: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/23.jpg)
Foundry tools• Shovel• Riddle• Rammers• Strike off bar• Vent wire• Trowel• Slick• Lifters• Draw spike
![Page 24: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/24.jpg)
Sand Casting
• Uses sand to hold the desired shape to be cast• Bonded with chemicals or clay with water or
oil• Many different types of sand casting
![Page 25: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/25.jpg)
MOULDING BOXES
![Page 26: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/26.jpg)
MOULDING BOXES
![Page 27: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/27.jpg)
Sand Casting
![Page 28: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/28.jpg)
![Page 29: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/29.jpg)
Oxy-fuel Furnace
• Uses a fuel gas such as propane, natural gas or acetylene
• Oxygen or atmosphere is blown in and combined with fuel
• Heat from combustion melts the charge
![Page 30: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/30.jpg)
Oxy-fuel Furnace
![Page 31: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/31.jpg)
Resistance Furnace
• A current passed through a material resulting in ohmic heating
• Radiation heats charge material• Some convection and conduction occurs
![Page 32: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/32.jpg)
Resistance Furnace
![Page 33: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/33.jpg)
Induction Furnace
• A current is passed through a water cooled coil near or around the charge
• Eddy currents are produced in the charge material in response to the coil current
• Heat is generated through ohmic heating in the material
![Page 34: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/34.jpg)
Induction Furnace
![Page 35: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/35.jpg)
Electric Arc Furnace
![Page 36: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/36.jpg)
CASTING PROCESS
![Page 37: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/37.jpg)
HEAT EXTRACTION AND SOLIDIFICATION• Directional solidification is important for the quality of
the casting (solidification proceeds from the most remote section to the points of feeding).
1. Feeder heads (risers)• They serve as wells of liquid metal to compensate for
shrinkage during solidification.2. Chills• They are heat-absorbing devices for fast freezing.• They are used to change progressive solidification to
directional solidification.• Naturally, solidification is progressive from the wall of the
mold towards the inner sections .
![Page 38: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/38.jpg)
Casting Terminology• Pattern this is an approximate duplicate of the final
casting and the mould material is• packed around the pattern and followed by removal of the
pattern to produce a mouldcavity.• Flask this is the box that contains the mould aggregate.• Cope is the name given to the top half of the pattern,
flask, mould or core.• Drag is the name given to the bottom half of the pattern,
flask, mould or core. The parting line separates the cope and the drag.• • A core is a sand shape that is inserted into the mould to
produce internal features of a casting such as holes.
![Page 39: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/39.jpg)
Casting Terminology
• The gating system is the network of channels used to deliver the molten metal to the
• mould cavity. The metal is introduced through a mouth called the pouring cup, it travels
• vertically down through the sprue and then along horizontal channels called runners
• through a gate into the mould cavity.• Casting is the term used to describe both the
process and the method.
![Page 40: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/40.jpg)
INTRODUCTION (CORES)
It is defined as sand bodies used to form hollow portion or cavities of desired shape and cavities.
Core is made of green sand and is placed in the mould after the pattern is withdrawn
Core are subjected to high heat of molten metal when it a poured and it has a good strength, good permeability, high refractoriness and sufficient collaspibility.
![Page 41: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/41.jpg)
•Types of cores
1.Horizontal Cores2.Vertical cores3.Balanced cores4.Drop cores.
![Page 42: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/42.jpg)
Defects in Casting• Defects may be due to pattern, Moulding box,
sand, cores, gating system, runner• 1. Mould shift: Misalignment of pattern, or
moulding box.• 2. Core shift: Mis alignment, UNDERSIZE OR
OVER SIZE, incorrect size of chaplet• 3. Swell: In sufficient ramming , Molten metal
pouring too rapidly or too hard.• 4. Shrinkage: Crank, ,lack of directional
solidification
![Page 43: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/43.jpg)
CASTING INSPECTION• To check the quality of casting for
acceptance /Rejection.• Two ways :• Destructive Inspection Method• Non destructive Inspection
Method.
![Page 44: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/44.jpg)
Destructive Inspection Method• Sample of casting is destroyed during
inspection.• Performed on test bars or on pieces cut
from sample casting.• Inspection is carried out to test and
measure mechanical properties like tensile strength, percentage elongation, hardness etc.
![Page 45: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/45.jpg)
Non destructive Inspection Method• Inspection is done by not destroying the
casting.• A) Visual Inspection: Crack, Tears dirt , blow
holes etc.• B) Dimensional Inspection: Different gauges
and Inspection .Techniques are used for dimensional verification.
• C) Pressure testing: To locate leaks in casting or check overall strength under hyfraulic presssure
![Page 46: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/46.jpg)
• Radiographic Inspection: X-rays are passed through for internal Inspection and recorde on photographic film.
• Ultrasonic Inspection• Flouroscent Penetration: Dipping, Spraying,
white powder, applied.
![Page 47: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/47.jpg)
Continous Casting
![Page 48: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/48.jpg)
Semi-permanent Casting
• A mold is made with both permanent and single use parts
• Consumable parts are usually cores made of chemically bonded sand
• After each pour the mold is cleaned and new consumables are added
![Page 49: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/49.jpg)
Semi-permanent Casting
![Page 50: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/50.jpg)
Investment Casting
• A refractory material (investment) is poured around or built up on a pattern
• The investment is hardened by drying or heating
• The pattern is removed by melting or burning• Metal is poured into the resulting cavity
![Page 51: Metal casting process](https://reader034.vdocuments.net/reader034/viewer/2022052209/554a0bc7b4c905825d8b4575/html5/thumbnails/51.jpg)
Investment Casting