Download - Michelin Databook 2013
-
7/14/2019 Michelin Databook 2013
1/115
TECHNICAL DATA
EARTHMOVER tyres
2013-2014 EDITION
-
7/14/2019 Michelin Databook 2013
2/115
IDENTIFICATION OF EARTHMOVER TYRES
TECHNICAL DATA EARTHMOVER TYRES
These values are given for information purpose only and may not be used for legal or statutory actions.
2013-2014 edition - N 29The most current version is available on www.michelinearthmover.com
PLEASE NOTE
Tyre load and pressure tables(pages 24 to 85)
These tables are classified according to the various applicationsof earthmoving machines.
In the load and pressure tables, the shaded boxes indicate
the normalized values.These values reflect the optimal use, the best balance of performances.
-
7/14/2019 Michelin Databook 2013
3/115
TECHNICAL DATA EARTHMOVER TYRES
3
CONTENTS
CLASSIFICATION OF MICHELIN TYRES 4According to their aspect ratio 4
According to the standardized usage (ISO-ETRTO-TRA-JATMA#
) 5According to their tread depths 5Summary 5
TYRE MARKINGS 6
DIFFERENT MICHELIN EARTHMOVER TYRE COMPOUNDS 7
LOAD INDEX - SPEED SYMBOL 8
EQUIVALENCE LOAD INDEX 9
MICHELIN EARTHMOVER TYRE RANGE 10 and 11
TECHNOLOGY OF MICHELIN RADIAL CASING TYRES 12
COMPARISON BETWEEN BIAS AND RADIAL TYRES 13
ADVICE AND RECOMMENDATIONSON THE USE OF MICHELIN EARTHMOVER TYRES 14
Introduction 15Choice of tyre 15Use of tyres 16Fitting 16Storage and maintenance 18Vehicle checks and maintenance 18Product life 20
CHARACTERISTICS OF MICHELIN EARTHMOVER TYRES 21 to 25 MICHELIN TYRE CHARACTERISTICS - TYRE LOADS (kg/lb) AND PRESSURES (bar/psi) 26 to 87
COMPONENTS USED WITH MICHELIN EARTHMOVER TYRES 89Approved rims for Michelin Earthmover tyres 90 to 93Tubes and flaps for Michelin Earthmover tyres 94 and 95Seals for Michelin earthmover tyres 96Valves and associated accessories for Michelin Earthmover tyres 97 to 100
HELP WITH THE USE OF EARTHMOVER TYRES 101Michelin Earthmover tyres for transport machines 102Michelin Earthmover tyres for mobile cranes, special applications,
rapid intervention vehicles (civil and military) 103Michelin Earthmover tyres used in desert and similar conditions 103Michelin Earthmover tyres for working machinessurface loaders in rehandling, production, extraction and face work 104Michelin Earthmover tyres for working machines: dozers 105Michelin Earthmover tyres for working machines: graders 105Michelin Earthmover tyres for compactors 106Michelin Earthmover tyres for roadbuilding machinery(planers, stabiliser mixers, pavers) 106Michelin Earthmover tyres for underground machines 107
TYRES FOR TRANSPORT MACHINES : TKPH (TMPH) METHOD 108 to 111
MICHELIN EARTHMOVER TYRES FOR SPECIFIC USES 112 APPROXIMATE LOOSE MATERIAL DENSITIESUNITS OF MEASURE AND CONVERSION TABLES 113
(#) see page 5
-
7/14/2019 Michelin Databook 2013
4/115
According to their aspect ratio
The wide diversity of earthmover machines and their uses requires the development of numerous ranges
of tyres.
Earthmover tyres differ from those mounted on cars or commercial vehicles by:
Their size and weight
Their tread depths are proportionally greater
More reinforcements to deal with the harsher conditions of use
There are several families of earthmover tyres, characterized by their aspect ratio H/S (ratio in % between the height
of the sidewall H and the section width of the tyre S).
H= standard section height(see page 22)- S= standard section width (see page 22)
80 series
The nominal section width is expressed in:
Inches or fractions of an inchExamples: 8.25 R 15, 20.5 R 25or
Examples: 59/80 R 63Tyres for rigid trucks, articulated dumpers, loaders,handling equipment, etcThe aspect ratio is not indicated in the sizedesignation.
The H/S ratio is approximately equal to 0.80.
100 series (standard)
The nominal section width is expressed in inches with
to decimal places.Examples: 18.00 R 33Tyres for rigid trucks, handling equipment, etcThe aspect ratio is not indicated in the sizedesignation.
The H/S ratio is approximately equal to 1.
Other series of tyres are also available: 95 series, 75 series, etc.
CLASSIFICATION OF MICHELIN TYRES
4TECHNICAL DATA EARTHMOVER tyres
H= 100 %
S
H= 80 %
S
65 series
The nominal section width is expressed in inches orin millimeters, followed by the number 65.Examples: 35/65 R 33, 750/65 R 25Tyres for large loaders, articulated trucks, etc
The H/S ratio is approximately equal to 0.65.
H= 65 %
S
90 series
The nominal section width is expressed in inchesfollowed by the number 90.Example: 50/90 R 57Tyres for rigid trucks
The H/S ratio is approximately equal to 0.90.
H= 90 %
S
-
7/14/2019 Michelin Databook 2013
5/115
TECHNICAL DATA EARTHMOVER TYRES
5
According to their tread depths
The tread depth SUPER, D1, D2 is sometimes indicated on the sidewall tyre.
(E2 - E3 - L2 -L3 -G2 - G3)
Traction / Regular treadMichelin designation:
N(Normal)
(SUPER E3, SUPER L3)Regular tread
Michelin designation:SUPER
(N < SUPER < D1)
(E4 - L4 - G4)Deep tread
Aggressive groundMichelin designation:
D1 = N x 1,5
(L5)Extra deep tread
Abrasive and aggressiveground
Michelin designation:D2 = N x 2,5
E
xternal
External
SUPERD2
D1N
Code Tread pattern Application
C1 SMOOTH Compactor
E1 RIBBED
TransportE2 TRACTIONE3 ROCKE4 ROCK (deep tread)E7 FLOTATION
G1 RIBBED
GraderG2 TRACTIONG3 ROCKG4 ROCK (deep tread)G5 ROCK (very-deep tread)
L2 TRACTION
Loader
Bulldozer
L3 ROCKL4 ROCK (deep tread)
L5 ROCK (very-deep tread)L3S SMOOTHL4S SMOOTH (deep tread)L5S SMOOTH (very-deep tread)
Summary
In addition, Michelin provides complementaryidentification to most earthmover tyres:T = Traction, R = Rock, V = speed, F = Flotation,
P = Multi purpose, S/R = Smooth/Rocke.g.: L3T Normal tread depth tyre (L3; Standardized
identification code) where traction is needed(T; Michelin code)
According to the standardised usage (ISO-ETRTO-TRA-JATMA*)
The four main categories of earthmover tyre are defined by their use. The category to which it belongs
is indicated on the sidewall of the tyre.
This is an international classification:
C Compactor
G GraderE Earthmoving
L Loader and bulldozer
Within these categories, there are different tread depths and special tread patterns, for very specific uses.These are identified by a number.They must be chosen according to the type of ground and the tyres condition of use.The letter S indicates a smooth tread; example: L-5S.
1 Ribbed (normal tread depth)2 Traction (normal tread depth)3 Normal (normal tread depth)4 Deep (deep tread)5 Very deep (very deep tread)
7 Flotation (normal tread)
* ISO: International Standard Organisation
ETRTO
: European Tyre and Rim OrganisationTRA: Tire and Rim Association
JATMA:Japan Automobile Tyre Manufacturers Association
-
7/14/2019 Michelin Databook 2013
6/115
6TECHNICAL DATA EARTHMOVER TYRES
What you can learn from the sidewall marking
1 Nominal section width of the tyre (in inches): 33
2 Tyre series: aspect ratio = 0.65
3 Radial construction: R
4 Rim diameter (in inches): 33
5 Load index of the tyre: **
6 Type of use: loader (L) with deep tread (5)
7 Radial tyre
8 Tyre for loader
9 Tubeless tyre
10Manufacturer: MICHELIN11Tread pattern: XMINED2
MICHELIN XMINED2
1
23 4 5
6
78
910
11
MICHELIN XDR2
- Radial construction
- Nominal section width of the tyre (in mm):525
- Tyre series:aspect ratio = 0.80
- Rim diameter (in inches):25
- Tubeless
- Brand:MICHELIN
- Tread pattern: X-CRANE +
12Load index of the tyre: 170
13Reference speed symbol of the tyre: F
14Regroovable
- Radial construction
- Nominal section width of the tyre (in inches): 37
- Rim diameter (in inches):57
- Tubeless
- Brand: MICHELIN
15Tyre compound: B4(explanation page 7)
- Tread pattern: XDR2
- Identification code: E4
(transport, deep tread)
- Load capacity: **
MICHELIN X-CRANE +
1213
14
TYRE MARKINGS
15
-
7/14/2019 Michelin Databook 2013
7/115
TECHNICAL DATA EARTHMOVER TYRES
7
Type A4:Particularly resistant to cuts, tread tearing and abrasion on very rough surfaces. minimum TKPH(TMPH)(#)
Type A:Particularly resistant to cuts, tread tearing and abrasion at average speedswhich are higher than those for A4 (above). low TKPH(TMPH)(#)
Type B4:Compromise solution between abrasion resistance and average speed on rough surfaces. moderate TKPH(TMPH)(#)
Type B:Higher resistance to internal heat generation on surfaces which are not particularly rough. average TKPH(TMPH)(#)
Type C4:Adapted to running on long cycles at high speeds on well-maintained roads. high TKPH(TMPH)(#)
Type C:Very high resistance to high average speeds on long cycles run on well-maintained roads. very high TKPH(TMPH)(#)
Type A4
TKPH(TMPH)(#)
aggressive surface smooth surface
Type A
Type B4
Type B
Type C4
Type C
DIFFERENT MICHELIN EARTHMOVER TYRE COMPOUNDS
TKPH: Ton kilometer per hourTMPH: Ton mile per hour(#) see page 106
-
7/14/2019 Michelin Databook 2013
8/115
TECHNICAL DATA EARTHMOVER TYRES
The SPEED SYMBOL indicates the maximum speed at which the tyre can carry a load corresponding to its load index,under specified conditions.
Symbol A2 A3 A4 A5 A6 A8 B C D E F G
speed(km/h) 10 15 20 25 30 40 50 60 65 70 80 90
speed(mph) 6 9 12 15 19 25 31 37 40 43 50 56
Examples of tyre marking:23.5 R 25 X-SUPER TERRAIN TL 185 B ; this tyre is able to carry 9250 kg at a speed of 50 km/h (20 390 lb at 31 mph)445/95 R 25 X-CRANE TL 174 F ; this tyre is able to carry 6 700 kg at a maximum speed of 80 km/h (14 770 lb at 50 mph)
It is imperative:- do not exceed the permitted max. speed of the tyre
- do not exceed the permitted max. distances in one hour indicated in the tablesof tyre characteristics
- At the time of fitting , it is vital that the various markings be checked , in order to be certain that the tyre is suitablefor operation at the maximum allowed vehicle speed and load.
Some tyres bear a load index and a speed symbol.
8
The LOAD INDEX is a numerical code which indicates the maximum load a tyre can carry at the speed corresponding to its speed symbol,under specified conditions.
LImaximum load
LImaximum load
LImaximum load
LImaximum load
LImaximum load
kg lb kg lb kg lb kg lb kg lb120 1 400 3 090 150 3 350 7 390 180 8 000 17 640 210 19 000 41 890 240 45 000 99 210121 1 450 3 200 151 3 450 7 610 181 8 250 18 190 211 19 500 43 000 241 46 250 101 960122 1 500 3 310 152 3 550 7 830 182 8 500 18 740 212 20 000 44 100 242 47 500 104 720123 1 550 3 420 153 3 650 8 050 183 8 750 19 290 213 20 600 45 420 243 48 750 107 470124 1 600 3 530 154 3 750 8 270 184 9 000 19 840 214 21 200 46 750 244 50 000 110 250125 1 650 3 640 155 3 875 8 540 185 9 250 20 390 215 21 800 48 070 245 51 500 113 540
126 1 700 3 750 156 4 000 8 820 186 9 500 20 940 216 22 400 49 390 246 53 000 117 950127 1 750 3 860 157 4 125 9 090 187 9 750 21 500 217 23 000 50 700 247 54 500 120 150128 1 800 3 970 158 4 250 9 370 188 10 000 22 050 218 23 600 52 040 248 56 000 123 480129 1 850 4 080 159 4 375 9 650 189 10 300 22 710 219 24 300 53 580 249 58 000 127 890
130 1 900 4 190 160 4 500 9 920 190 10 600 23 370 220 25 000 55 120 250 60 000 132 300131 1 950 4 300 161 4 625 10 200 191 10 900 24 030 221 25 750 56 780 251 61 500 135 580132 2 000 4 410 162 4 750 10 470 192 11 200 24 690 222 26 500 58 430 252 63 000 138 890133 2 060 4 540 163 4 875 10 750 193 11 500 25 360 223 27 250 60 070 253 65 000 143 300134 2 120 4 670 164 5 000 11 020 194 11 800 26 020 224 28 000 61 740 254 67 000 147 710135 2 180 4 810 165 5 150 11 350 195 12 150 26 790 225 29 000 63 940 255 69 000 152 120136 2 240 4 940 166 5 300 11 690 196 12 500 27 560 226 30 000 66 150 256 71 000 156 530137 2 300 5 070 167 5 450 12 020 197 12 850 28 330 227 30 750 67 790 257 73 000 160 930138 2 360 5 200 168 5 600 12 350 198 13 200 29 100 228 31 500 69 460 258 75 000 165 340139 2 430 5 360 169 5 800 12 790 199 13 600 29 990 229 32 500 71 660 259 77 500 170 660
140 2 500 5 510 170 6 000 13 230 200 14 000 30 870 230 33 500 73 870 260 80 000 176 400141 2 575 5 680 171 6 150 13 560 201 14 500 31 970 231 34 500 76 070 261 82 500 181 880142 2 650 5 840 172 6 300 13 890 202 15 000 33 070 232 35 500 78 280 262 85 000 187 390143 2 725 6 010 173 6 500 14 330 203 15 500 34 180 233 36 500 80 480 263 87 500 192 900144 2 800 6 170 174 6 700 14 770 204 16 000 35 280 234 37 500 82 690 264 90 000 198 450145 2 900 6 390 175 6 900 15 210 205 16 500 36 380 235 38 750 85 430 265 92 500 203 920146 3 000 6 610 176 7 100 15 650 206 17 000 37 480 236 40 000 88 200 266 95 000 209 440147 3 075 6 780 177 7 300 16 090 207 17 500 38 590 237 41 250 90 940 267 97 500 214 950148 3 150 6 950 178 7 500 16 530 208 18 000 39 690 238 42 500 93 710 268 100 000 220 500149 3 250 7 170 179 7 750 17 090 209 18 500 40 790 239 43 750 96 470 269 103 000 227 370
LOAD INDEX - SPEED SYMBOL
LOAD INDEX (LI) ANDMAXIMUM LOAD (KG/LB)
SPEED SYMBOLS
-
7/14/2019 Michelin Databook 2013
9/115
TECHNICAL DATA EARTHMOVER TYRES
9
(1) no corresponding PR in these sizes which are only made in radial construction.
7.50 R 15 12
8.25 R 15 12
10.00 R 15
350/65 R 15 (1)
14.5 R 15
400/80 R 15 (1)
9.00 R 20 16
10.00 R 20 16
12.00 R 20 18
E20 (13./80 R 20) (1)
14.00 R 20 (1)
16.00 R 20
525/70 R 20.5
24 R 20.5
24 R 21
12.00 R 24 *** 24 24
13.00 R 24 TG * 14
14.00 R 24 TG * 16
14.00 R 24 24
14.00 R 24 *** 28 32
385/95 R 24(170E, 170F)15.00 R 24(17/80 R 24) (1)
16.00 R 24 TG * 16
16.00 R 24 ** 36
13.00 R 25 *** 28
14.00 R 25 *** 32
385/95 R 25(170E, 170F)
15.5 R 25 * 16
16.00 R 25 ** 36
395/80 R 25 (165E)
17.5 R 25 * 16
17.5 R 25 ** 20 24
18.00 R 25 * 24
445/95 R 25(174E, 177E, 177F)
445/80 R 25 (170E)
18.00 R 25 ** 36
20.5 R 25 * 24
20.5 R 25 ** 28
505/85 R 25 (183E)
550/65 R 25 * (1)
21.00 R 25 ** 40
23.5 R 25 * 28
23.5 R 25 ** 32
525/80 R 25 (179E)
600/65 R 25 * (1)
650/65 R 25 (1)
26.5 R 25 * 32
26.5 R 25 ** 32
750/65 R 25 (1)
29.5 R 25 * 34
29.5 R 25 ** 34
850/65 R 25 (1)
26.5 R 29 ** 34
775/65 R 29 (1)
29.5 R 29 * 34
29.5 R 29 ** 40
33.25 R 29 ** 44
800/65 R 29 * (1)
875/65 R 29 (1)
18.00 R 33 ** 40
21.00 R 33 ** 32
33.5 R 33 ** 44
35/65 R 33 * 36
35/65 R 33 ** (1)
37.5 R 33 ** 48
21.00 R 35 ** 44
24.00 R 35 ** 48
29.5 R 35 ** 40
33.25 R 35 ** 44
37.25 R 35 ** 48
37.5 R 39 ** 52
40/65 R 39 * 42
40.5/75 R 39 ** 54
45/65 R 39 * (1)
45/65 R 45 * 50
24.00 R 49 ** 48
27.00 R 49 ** 54
30.00 R 51 ** 64
33.00 R 51 ** 68
36.00 R 51 ** 74
50/65 R 51 ** (1)
37.00 R 57 ** (1)
40.00 R 57 ** 78
50/80 R 57 ** (1)
55/80 R 57 * (1)
50/90 R 57 ** (1)
60/80 R 57 (1)
53/80 R 63 ** (1)
55/80 R 63 ** (1)
56/80 R 63 ** (1)
59/80 R 63 ** (1)
Sizesand
Markings
Workmachines
PR
Transportmachines
PR
Sizesand
Markings
Workmachines
PR
Transportmachines
PR
Sizesand
Markings
Workmachines
PR
Transportmachines
PR
EQUIVALENCE LOAD INDEX:CORRESPONDENCE BETWEEN MARKINGS STAR RATING AND PLY RATING (PR)
-
7/14/2019 Michelin Databook 2013
10/115
TECHNICAL DATA EARTHMOVER TYRES
MICHELIN EARTHMOVER TYRE RANGE
10
A VARIETY OF TREAD PATTERNSConsult the Earthmover tyre range brochure for the conditions of use of each tyre by machine type.
XLC XGLA2 XTLA XSNOPLUS
XHA2 XHA XLD XLDD1 XLDD2
XRDN XKA X MINE D2 XSMDN XSMD2+
XZL XZH XLB XS XMP
XMH S X-CRANE - X-CRANE + XGC XVC
-
7/14/2019 Michelin Databook 2013
11/115
TECHNICAL DATA EARTHMOVER TYRES
XAD 65 XADN - XADN + X-SUPER TERRAIN - X-SUPER TERRAIN + XADT
XRB XTS XMS XRS XTXL
X-TRACTION S XDM XDC XDR S
XHD1 X - QUARRYX - QUARRY S X HAUL XDT
XKD1 X-TRACTION XDM XDR - XDR+ XDR2
11
MICHELIN EARTHMOVER TYRE RANGE
-
7/14/2019 Michelin Databook 2013
12/115
TECHNICAL DATA EARTHMOVER TYRES
TECHNOLOGY OF MICHELIN RADIAL CASING TYRES
12
Using a radial tyre also improves fuel economy and reduces the environmental footprint.
Two machines are launched at 30 km/h. After disengaging the motor, we measure the distance traveled.
The machine, equipped with Michelin tyres, has less rolling resistance and therefore travel further. This equates
to lower fuel consumption in operation.
Image from tests carried out in our research and development in Almeria in Spain.
MICHELIN XHA2
23.5 - 25 BIAS
A tyres construction is the key to its performance, and outstanding tyre performance is a key competitive
advantage for transport and working machines in the earthmover industry.
Earthmoving equipment can achieve outstanding performance by using radial tyres.
CompositionThe radial design combines metal or fabric plies, extending from one bead to the other, with a belt made of several steel
plies designed to reinforce the crown of the tyre.
A unique construction with numerous advantagesThe sidewalls and crown work independently:
Minimizing the deformation of the contact patch and the weight of the tyre
Improving adhesion and traction while slowing down the rate of wear
Increasing the load capacity as the metal casing can take higher inflation pressures
The flexibility of the sidewalls of a radial tyre therefore provides greater comfort:
- No compromise on stability
- Better resistance to damage and punctures
Tyre performance levels that transformmachine performanceMichelin invented the radial design and is an expert in this field.
Radial tyres significantly improve the productivity of earthmover machines.
The radial technology offers the best compromise between the following factors: load, speed, operational efficiency of
the machines, tyre service life, operator safety, etc.
The radial casing permitsto work independently of the
tyres sidewalls and crown.
Find this test
and many other video on the
www.michelinearthmover.com
or from your Michelin
account manager.
-
7/14/2019 Michelin Databook 2013
13/115
TECHNICAL DATA EARTHMOVER TYRES
13
COMPARISON BETWEEN BIAS AND RADIAL TYRES
Advantages: long tyre life better traction on all types of surface lower fuel consumption due to lower rolling resistance improved comfort increased resistance to punctures / flats increased resistance to heating
The crownis stabilizedby severalplies.
The casinghas only
one radialply.
Bias or cross ply construction
Disadvantages: accelerated wear
less grip increased fuel consumption
The MICHELIN X radial
The casing is made upof several
criss-crossed plies. The crownis notstabilized.
The sidewall and treadfunction separately.
The tread is unaffected by the flexingof the sidewalls, so there is:
less deformation of the tyre contact areaon the ground
less movement in tread contact area no movement between casing plies
The crown and sidewallsare formed by the sameply structure.
The tread is affected by flexing of the sidewalls,resulting in:
deformation of the tyre contact areaon the ground
movement in the tread contact area.
The casing plies tend to scissor in relationto each other
-
7/14/2019 Michelin Databook 2013
14/115
14TECHNICAL DATA EARTHMOVER TYRES
ADVICE AND RECOMMENDATIONS
ADVICE AND RECOMMENDATIONSON THE USE OF MICHELIN EARTHMOVER TYRES 15
Introduction 15
Choice of tyre 15
Use of tyres 16
Fitting 16
Storage and maintenance 18
Vehicle checks and maintenance 18
Product life 20
CHARACTERISTICS OF MICHELIN EARTHMOVER TYRES 21 to 25
Michelin 15 to 63 inch tyres
MICHELIN TYRE CHARACTERISTICS - TYRE LOADS (kg/lb) AND PRESSURES (bar/psi) 26 to 87
-
7/14/2019 Michelin Databook 2013
15/115
TECHNICAL DATA EARTHMOVER TYRES
15
The following information is extracted from theUse and Maintenance Guide of Michelin Earthmover Tyres.For more details, consult our websitewww.michelinearthmover.com or from your Michelin representative.
Introduction
The tyre is the only point of contact between the machine and the ground.Users must ensure that they preserve the life and performance of their tyres. To do so, it is recommended that users
adhere to the following safety instructions and usage recommendations. These recommendations are subject to more
restrictive local provisions: legal, regulatory requirements, etc.
Choice of tyre
The choice of a tyre must be compliant
with legislation and with equipment
recommended by the vehicle or tyremanufacturer or by an official organisation
(size, load and speed indices, tyre structures,
etc.).
Moreover, it is necessary to take account
of the conditions in which the tyre will be
used in order to ensure its performance to
meet the users expectations. The type of
tread pattern depends mainly on conditions
of use encountered: adherence, risk of cuts,
rapid wear. The optimum performance of
equipment depends largely on the choice of
tyre.
A tread pattern inappropriate for the work
leads to a sharp reduction in the tyres life
and may affect vehicle productivity.
In the event of the original vehicle equipment
being modified, it is advisable to make sure
that the solution offered is compliant with the legislation in force, the machines technical constraints, conditions of use
and the manufacturers recommendations, (Please refer to regulations in force in the local country). Therefore, in some
countries, a modified machine must receive administrative authorisation.
Before being fitted, any second-hand or used tyre must be subjected to careful inspection by a specialist tyre professionalin order to guarantee the safety of the user and compliance with the regulations in force (Vehicle checks and maintenance).
i ch l i n ir C r r t i nn r uth
1 1r nv il l , C
Ul: 1
n u c tu r r n in u m t i u i ch l i n
, l c C rm ch uC l rm n t r r n C
r n cl : 7
i ch l in u t r l i t L t1 7 n n l l t r t
rt l urni ct r i 7u t r l il: 1 71 1
n u c tu r r n in u m t i u i ch l i n
, l c C rm ch uC l rm n t r r n C
r n cl : 7
i ch l in Chin Inv t m nt C . L t .n in C n t rr t r, 1 th r
n hih n h i 11
Ch inl : 1 1
ci i ch l in r ti ciI n u t r i l C m m r c i l L t
v n i m r ic l cr r i juc
i n ir C 1r i ll: 1 1
7
CC
lrm
nt-Frrn
-EFC
7
-Fr
(
-7)-
f.
-
h
t
r
hs:
ich
lin-
Istck-
rc
nci
l-
ris-
PEFC/10-31-1319
ADVICE AND RECOMMENDATIONSON THE USE OF MICHELIN EARTHMOVER
-
7/14/2019 Michelin Databook 2013
16/115
16TECHNICAL DATA EARTHMOVER TYRES
Use of tyres
General Recommendations
Never use the tyre beyond the limits of the technical specifications for which it has been approved on the machines.
Certain excessive or abnormal geometrical settings for the machine may have an effect on the tyres performance.
Poor use or wrong choice of tyre can also contribute to premature wearing of certain mechanical parts.
According to the obligations of the legislation, or technical or security recommendations, the two tyres on the same axle
must be identical.
Fitting of TG earthmover tyres (24 inch diameter)
TG tyres (XGLA2, XRA, XSNOPLUS) must only be fitted on drop-centre, semi drop-centre or single piece wheels.
Do not fit these tyres on flat base rims which are incompatible (there are difference in seat diameter that can approach 5 mm
between flat rims and TG rims).
Fitting of 15.5 R 25* and 17.5 R 25* earthmover tyres
L2 (XTLA*, XSNOPLUS*) and L3 (XHA*) tyres can be fitted to:
- multi piece SDC or Flat Base rims
- single piece rims
NOTE: L3** (XKA), L4 (XLDD1) and L5 (XLD D2,* XMINE D2, XSM D2+) tyres should only be fitted to multi piece rims.
They should not be fitted to single piece rims.
Dual mountingFor technical and safety reasons, you must adhere to the recommendations of the manufacturer of the machine.
We advise against the following mountings:
dual mounting of Michelin radial tyres with cross ply (bias) tyres
dual mounting of a tyre of normal tread depth with a deep treaded tyre
dual mounting of tyres of the same type which have different remaining tread depths (Some legislation sets
a maximum differential.)
According to legislation in force and for technical reasons, it is either mandatory or strongly advised to use two tyres
of the same tread design on the same axle.
Fitting
IntroductionCorrect fitting, performed in accordance with recommended operating procedures
and complying with the safety rules in force, ensures excellent protection
for people and material, and allows the tyres full potential to be exploited.
Poor fitting can cause damage to the tyres, the vehicle or to people (serious,
even fatal injuries).
It is therefore essential that these operations are carried out by people
who have been trained and who have the appropriate equipment available,
and in accordance with the procedure.
We strongly recommend that tyre fitting is undertaken by a trained tyre professional.
Tube type tyres must be fitted with an appropriate flap and inner tube.
In all cases, it is essential to refer to the technical instructions of the tyre manufacturer, vehicle manufacturer and wheel
manufacturer, as well as the user manual for the tyre-fitting machinery or equipment.
Semi DropCentre rim
(SDC)
Ok
Flat base rim
No
TG tyre
-
7/14/2019 Michelin Databook 2013
17/115
TECHNICAL DATA EARTHMOVER TYRES
17
General precautions
Operators must always wear appropriate protection equipment.
Operators must know recommended procedure.
Operators must ensure that the vehicle is stopped, secured and properly stabilized (parking brake engaged, blocks ...),
motor turned off.
Precautions for removal
a) when removing the vehicle wheel
If the tyre is twin-fitted or if the rim shows evidence of damage, the tyres must be deflated prior to removal of
the whole fitment (remove the valve core). Failure to observe this could lead to accidents very serious consequences.
Ensure that the tyres temperature allows it to be removed safely. Comply with the manufacturers recommen dations
and instructions.
b) when the tyre is removed on the vehicle
Completely deflate the tyre before any operation.
Precautions for fitting
- Ensure that the wheel and its components are in good condition
- Check dimensional compliance (tyre and wheel)- Ensure compatibility between tyres and wheels
- Adhere to the positions, direction of fitting, direction of rotation and any other instructions referred to on the tyre sidewall.
- In the case of multi-piece wheels, replace the O-ring seal
- In the case of tubeless mounting
with a rubber valve, this must be systematically replaced
with metallic valves, check the air tightness and continue with the replacement of valve cores or seals if necessary
- After fitting the tyre to the vehicle, a torque wrench must be used to achieve the optimal torque as specified by
the machine manufacturer.
Precautions for inflating
Tyre inflation is an essential factor, not only for optimisation of tyre performance butalso in terms of SAFETY.
It is necessary for correct machine behavior (road holding and braking) as well as
maintaining the tyres stability.
Only use inflation equipment intended for this purpose and fitted with a pressure
limiter.
No person must be in the immediate proximity of the equipment in order to be out of
the path of any potential discharge in the event of an incident.
Operating pressure
The inflation pressure that must be strictly adhered to is that recommended
by the manufacturer.
In the absence of real elements known to determine a pressure (weighing results,
driving conditions, etc...), a basic pressure can be viewed on the Fitment Guide
but is only given as indicative.
The operating pressure can be given only by the Michelin representative
or by a qualified professional who is trained to take into account the use criteria of
the tyre (ground conditions, cycle lengths, transported materials, etc.).
Under-inflation or over-inflation can significantly affect tyre performance
Rolling underinflated causes an abnormal rise in temperature of the components of the tyre and can cause one
tyre degradation. This degradation is irreversible and may lead to destruction of tyre with brutal deflation.
The negative effects of insufficient inflated pressure are not necessarily immediate and even may manifest until some
time after correction...
DANGER DANGER
SIDEWALL
SIDEWALL
SAFETY ZONE
SAFETY ZONE
minimum of 6 meters from the valve
minimum of 6 meters from the valve
-
7/14/2019 Michelin Databook 2013
18/115
18TECHNICAL DATA EARTHMOVER TYRES
Storage and maintenance
Tyres are rubber-based and are subject to natural ageing.
For that storage does not adversely affect the life of the
tyre, but it must be under specific conditions, limited in
time, and as far as possible inside. In premises that are well-ventilated, dry and temperate,
protected from direct sunlight and bad weather
Away from any chemical substances, solvents or
hydrocarbons likely to interfere with the nature of the
rubber
Away from any object that could penetrate the rubber
(sharp metal, wood, etc.)
Away from any source of heat, flame, incandescent
object, material that could cause sparks or electrical
discharges and any ozone sources (transformers, electric
motors, soldering devices, etc.).
Poor handling of an unfitted tyre can cause it to be irreparably damaged.
In order to eliminate the risk of bead damage and the problems which could result, we strongly advise that:
1 - The tyre is not lifted directly by the bead with a crane hook.
2 - Flat straps are used (not steel slings or chains).
3 - The tyre is lifted under the tread and not on the beads when a fork lift truck is used.
Moreover, accessories must be stored in their original packaging, on surfaces that do not present any danger of cutting,
tearing or perforation.
In all cases, for the handling of tyres and accessories, operators must
Be equipped with their protective clothing.
Observe the safety of the company.
Use a suitable material to use.Use of instruments and equipment that is not harmful to tyres.
Operators must always wear their normal protective clothing for handling.
To share best practices and recommendations for storage of tyres or wheel assemblies, consult your Michelin representative.
Machine checks and maintenance
General recommendations
Ensure that the machine is stationary and
secured before any inspection.
Tyres must be inspected regularly in order todetect any unusual wear and potential damage.
Wheel torque must be checked in accordance
with the machine manufacturers recommen-
dations.
Any perforations, cuts or visible distortion of
the tread, sidewalls or flange area must be
the subject of a thorough (internal/external)
examination of the tyre by a tyre professional.
It is the same for any damage to the rim.
In all circumstances, do not put back into
operation any tyres that exhibit damage,
such as deformed bead or visible bead wire, separations between components, visible cable cords, damage from grease
or corrosive particles, marbling or abrasion of the interior rubber resulting from any running at insufficient pressure.
Each time the machine is inspected, check that the valve cap is in good condition. If in doubt, replace it.
-
7/14/2019 Michelin Databook 2013
19/115
TECHNICAL DATA EARTHMOVER TYRES
19
Checking for wear
Checking for wear must always be carried out at several points on the tyre.
This check can be carried out using a tyre depth gauge or by looking for signs of wear
on the tread (noted on the sidewall by a symbol when present).
If the legal or technical limit for wear has been reached, the tyre must be removed and
replaced.
A tyre professional must be consulted if there is abnormal wear or a difference
in wear between two tyres on the same axle.
Pressure
Given that a tyre loses pressure naturally, it is necessary to adjust it periodically.
This check will enable any abnormal loss of pressure to be detected.
This check must be carried out on all the vehicles tyres.
A tyre operated with insufficient pressure will undergo an abnormal rise in operating temperature, which can lead to
irreversible damage of internal components and cause its complete destruction with up to rapid deflation of the tyre.The consequences of running with insufficient inflation pressure are not necessarily immediate and may appear even
after rectification.
An excessive pressure can cause rapid and irregular wear,
resulting in increased susceptibility to impacts (tread
damage, rupture of the casing, etc.).
It is recommended that tyre pressures are checked when
tyres are cold
If they are checked after running, the tyres are hot and
pressure will not be accurate.
If pressure is checked when hot, the pressure should bereadjusted in line with the manufacturers recommendations
(consult your Michelin representative).
Given that pressure increases with temperature, a hot tyre
must never be deflated.
Always respect the equality of pressure between dual tyres.
Inflation with nitrogen is not an exemption from the need to check tyre pressure regularly.
In all circumstances, adhere to the pressures recommended by the machine or tyre manufacturers.
Repair
Not all damage can be repaired.
All repairs must be carried out by a trainedand qualified professional.
Repairs are preceded as a matter of course
by a detailed inspection of the tyre by the
professional. A tyre that has been run
underinflated or flat may have suffered
irreversible damage and only an exhaustive
check of the interior of the tyre will enable
a diagnosis of whether or not the tyre can
be put back into use.
Removal of the tyre is therefore essential
in order to assess with certainty its actual
condition and the type of repair required.
-
7/14/2019 Michelin Databook 2013
20/115
20TECHNICAL DATA EARTHMOVER TYRES
Product life
Tyres are made from different types of materials and rubber-based components, whose properties are essential to the
proper running of the tyre itself. These properties evolve over time.
For each tyre, this evolution depends on many factors, such as climate, storage conditions (temperature, humidity,
position, etc.), conditions of use (load, speed, inflation pressure, road damage, etc.) to which the tyre is subjected duringits working life.
These ageing factors vary so much that it is impossible to predict the life of a tyre with any accuracy. This is why, in
addition to regular user checks, it is recommended to have the tyres regularly checked by a qualified professional, who
will determine whether the tyre is fit to continue in operation.
This inspection must be carried out at least once a year.
Michelin may in no way be held responsible for damage that may occur as a result of use contrary to its instructions.
The preceding information is extracted from theUSE AND MAINTENANCE GUIDE FOR MICHELINEARTHMOVER TYRES.For more details, consult our website
www.michelinearthmover.comor from your Michelinrepresentative.
il T
1 1ll ,
T l + 1
F l , l - l -F F
T l + 7
i I il l L1- 7F lll
7 l
T l + 1 711
F l , l - l -F F
T l + 7
i
l I . L .T E T ,1
11
T l + 1 1
l i l I l
lL - l T
E -1 lT l + 1 1
7
C
Cl
rm
nt -
Frr
n
-EF
C
7
-F r
(
11-
7)-
f.
-h
t
r
h
:
i ch
lin
-It
c k-
rc
nci
l-
ri-
1
P E F C / 1
0 -
3 1
- 1 3 1 9
i I i
i
i
l i
-
7/14/2019 Michelin Databook 2013
21/115
TECHNICAL DATA EARTHMOVER tyres
21
CHARACTERISTICS OF MICHELIN EARTHMOVER TYRES
EXPLANATION OF THE DIFFERENT MEASUREMENTS
e: maximum overall section width section width on measuring rim (this rim is indicated in bold)
D: external tyre diameter (R x 2)
: nominal bead seat diameter (rim diameter)
S: standard section width
E: minimum Michelin dual spacing (on measuring rim)
H: standard section height
R: free radius (2R = D)
R: static loaded radius *
RC: rolling circumference *
Tread depth: tyre tread depth in mm (rubber depth that can be use without risking damage to plies)
Cap.: Interior capacity of the tyre (to calculate the nitogen quantity when inflated with nitrogen, or the liquid quantity when filled).
This information is not required when when inflated with air.
* determinated by the reference conditions (see page 8).
The dimensional data given in tabular form in this publication (as indicated above) conforms to those of the European Standard (E.T.R.T.O.).They are given for information only and may change.
-
7/14/2019 Michelin Databook 2013
22/115
-
7/14/2019 Michelin Databook 2013
23/115
TECHNICAL DATA EARTHMOVER tyres
READING GUIDE FOR LOAD, PRESSURE AND USE TABLES
Reading guide for pressure, load and use tables
Remember: the correct pressure of the machine (on a site and for a job) depends on the working conditions and type of use.In order to obtain optimum performance from tyre, it is advised that:- the machine is weighed under working loads,- the maximum distance allowed per hour for the tyre is not exceeded.
The shaded box of pressure, load and use tables is the value defined by the industry standards. Up to this limit, the tyre works in an optimal zoneleading to a better balance of performance.The use of Michelin earthmover tyres outside the specification of pressure, load and use tables must have a technical validation givenby your Michelin representative.
EXPLANATION OF REFERENCES
1/ see pages ..............7 and106......explanation about TKPH (TMPH)2/ see page ................20...................explanation of the different characteristics
3/ ......................................................explanation about rim size marking example:... 44.00/5.0 [6.0] the 1stvalue indicates rim width in inch) (in this example: 44 inches)
the 2ndvalue indicates the height of the rim flange (in this example: 5 inches)
the 3rdvalue indicates the width of the rim flange (in this example: 6 inches)
4/ see page ................87...................information and explanation about components used with Michelin earthmover tyres
5/ ......................................................increase pressure by 0,5 bar on the loader front axle
6/ see page ................15...................and in the EARTHMOVER TYRE USE AND MAINTENANCE GUIDE BY MICHELINexplanation about TG rim
7/ ......................................................tyre under development that will be available during the year
8/ ......................................................deleted manufacturing tyres (commercial description highlighted to attract attention)
9/ ......................................................special order only (commercial description highlighted to attract attention)Consult your local Michelin representative
10/ see pages ..20 to 23, 99 to 109..explanation of the various tables of load according to the use and to the tyre positionand how to determine pressures.It is imperative to follow the explanation given.Not following instructions may impact tyre performance.
11/ see page ...............5.....................standardized identification codes
12/ ....................................................never exceed 6 bar
CHARACTERISTICS OF MICHELIN EARTHMOVER TYRES
-
7/14/2019 Michelin Databook 2013
24/115
TECHNICAL DATA EARTHMOVER tyres
CHARACTERISTICS OF MICHELIN EARTHMOVER TYRES
EXPLANATION OF THE DIFFERENT USES
Important: load/pressure scales are classified according different uses of machines
Loaders: This table is used in priority. The loads come from the weighing of the loader or the axle weight given by the manufacturer.Front Laden This is the pressure, load and use tables, built from the reference point
T & RA Off-the-road slow speed service. For front tyres of the loader, it is possible to increase the pressure value given in Table Front Laden up to 1 bar without
changing the carrying capacity. The resulting pressure must remain below the maximum values of inflation pressurewhen the latter are specified (see previous page).
Front Tipping This table is used when the only information available is that of the operating weight and tipping load of the loader.This table can not be used to determine the operating pressure of dimensions 35/65 R 33 and beyond.
Rear Unladen This table is used when the weight of the rear axle of the unladen loader is known or when the rear axle weightis given by the manufacturer.
Compactor:
10 and 15 km/h These tables are given according to the maximum work speeds of the compactors. In all cases, the indications andthe instructions provided by the manufacturer must be applied (Table indicating the pressure according to the workto be carried out).
Underground mining machines: This is the table that is used for tyres fitted to underground transport machines.
Graders:All axles This is the table that is used when the axle weight has been determined (by weighing or from the manufacturer's data).
This table is derived from a reference speed of 40 km/h.For higher speeds, a decline of carrying capacity, as shown in the table below, is applied in accordance with the TRA(TRA 4-27).
Speed of use (km/h) Variation in load capacity (%)
40 0
50 - 9
60 - 18
65 - 27
Transport (rigid dump trucks, trucks, ), Articulated dump trucks, Scrapers:Standard Table loads / pressures built from the reference point Off-the-road haulage service.
This is the table that is used when one has determined the axle load (by weighing or by the manufacturer).
Cranes and similar specialized machines:Standard This is the table Load / Speed / Pressure that is used to adjust the pressure at the desired load based on maximum
rates of use for the tyres fitted on vehicles (all terrain, mobile cranes, intervention vehicules).There are two ranges of tyres. Reference speed 70 km/h, Speed symbol E or reference speed 80 km/h,Speed symbol F.
-
7/14/2019 Michelin Databook 2013
25/115
TECHNICAL DATA EARTHMOVER tyres
CHARACTERISTICS OF MICHELIN EARTHMOVER TYRES
Use in deserts and similar conditions Depending on whether the vehicle is fitted single or twin, the corresponding load table will be adopted.
1/ Road (Road in single / Road in twin):These pressures are to be applied when the vehicle runs on good roads (This means asphalt or compactedsurfaces). For these conditions the pressures have been calculated for a maximum speed of 80 km/h (50 mph)or 65 km/h (40 mph) depending on the tyre size considered.
2/ Track (Track in single / Track in twin):These pressures are recommended for driving on roads in poor condition, washboard (corrugated) and gravel ordesert surfaces.For these conditions the pressures have been calculated
for a maximum speed of 65 km/h (40 mph).if the speed on road is 80 km/h (50 mph), or a maximum speed of 50 km/h (30 mph).if the speed on road is 65 km/h (40 mph).
3/ Sand (Sand in single / sand in twin):These pressures are used to allow the vehicle to cross without difficulty the difficult areas where the problemof adhesion or depression can be important. To avoid premature depletion of the kilometric performance,the speed must be limited
to 20 km/h (12,5 mph) if the speed on road is 80 km/h (50 mph), to 15 km/h (9.3 mph) if the speed on road is 65 km/h (40 mph). After "sand" use, the pressure must be readjusted for subsequent conditions of use (road or track).
-
7/14/2019 Michelin Databook 2013
26/115
26
CHARACTERISTICS OF MICHELIN EARTHMOVER
TECHNICAL DATA - EARTHMOVER TYRES
15"7.50 R 15 Tube Type
XLC C1123461
1987,8
77030,3
33813,3
232491,5
911,3
4011
5.56.0
6.00S6.5B6.5
- 15/16 J
15x6.00 (8)
XMINE D2 L5123342
63,7
2309,1
84033,1
38515,2
2551100,4
4658
3910
5.56.0
6.00S6.5
B6.5
- 15/16 J
15x6.00 (8)
8.25 R 15 Tube Type
XMINE D2 L5123352
63,7
2509,8
88234,7
40215,8
2680105,5
4860,5
4712
6.06.5
B6.57.0
-15 K
15x7.50 (8)15x6.00 (8)
15x6.00
10.00 R 15 Tube Type
XMINE D2 L5123372 63,7 29511,6 91035,8 41116,2 2748108,2 4860,5 7018 7.07.5
- 15 P
15x7.50 (8)
350/65 R 15 (32x14.5 R 15) Tubeless
XMINE D2 L5826683
63,7
34813,7
84433,2
37914,9
2543100,1
3645,4
9124
10.5011.50
- -
-
14.5 R 15 Tubeless
XMINE D2 L5123101
63,7
38015
89435,2
40816,1
2711106,7
4860,5
9024
10.5011.00BD
11.011.50
- -
-
400/80 R 15 (38x16 R 15) Tubeless
XMINE D2 L5735466
63,7
38515,2
99639,2
44517,5
2996118
3442,8
12834
11.50- -
-
COMMERCIALDESCRIPTION
TypesCAI (Part Number)
Max.dist./hourkm
Miles
TKPHTMPH
(1)
DIMENSIONAL CHARACTERISTICS (2)Measuring
RimApproved
Rims(3) - (4)
Tubeless
O-ringCAI(4)
Tube Type
Ref.
Flap(4)
Michelin dimensions
e D R RC Tread depth E Cap.
mm mm mm mm mm mm l
inches inches inches inches 32rd inches galon
-
7/14/2019 Michelin Databook 2013
27/115
TECHNICAL DATA - EARTHMOVER TYRES
27
TIRE LOADS IN KG/LB - TIRE PRESSURES IN BAR/PSI
15"Machine - Use
bar 3 3,5 3,75 4 4,5 5 5,5 6 7 8
psi 44 51 54 58 65 73 80 87 102 116
XLC C1 C1 Compactors
10 km/h6 mph
12502756
14003087
14703241
15403396
16803704
18304035
19704344
21204675
24205336
27256009
15 km/h9 mph
10202249
11352503
11902624
12502756
13753032
15003308
16003528
17003749
19804366
21804807
XMINE D2 L5 L5 Loaders
Frontladen
18504079
20004410
20754575
21504741
22504961
24005292
25005513
26505843
29006395
31506946
Rearunladen
14753252
16003528
16503638
17253804
18003969
19254245
20004410
21254686
23255127
25255568
XMINE D2 L5 L5 Underground machines All axles16753693
18003969
18754134
19254245
20254465
21504741
22504961
23755237
26005733
28256229
7.5
0
R1
5
XMINE D2 L5 L5 Loaders
Frontladen
20004410
22004851
23005072
24005292
25505623
27005954
28506284
30006615
33007277
36007938
Rearunladen
16003528
17503859
18504079
19254245
20504520
21504741
22755016
24005292
26505843
28756339
XMINE D2 L5 L5 Underground machines All axles18003969
19754355
20754575
21504741
23005072
24255347
25755678
27005954
29756560
32507166
8.2
5
R1
5
Machine - Usebar 3 3,5 4 4,5 5 5,5 6 6,5 7 8
psi 44 51 58 65 73 80 87 94 102 116
XMINE D2 L5 L5 Loaders
Frontladen
24005292
26005733
28006174
30006615
32007056
33507387
35007718
37008159
39008600
43009482
Rearunladen 19254245 20754575 22504961 24005292 25505623 26755898 28006174 29656538 31256891 34507607
XMINE D2 L5 L5 Underground machines All axles21504741
23505182
25255568
27005954
28756339
30256670
31506946
33257332
35007718
38758544
10.0
0
R1
5
Machine - Usebar 3 3,5 3,75 4 4,5 5 5,5 6 7 8
psi 44 51 54 58 65 73 80 87 102 116
XMINE D2 L5 L5 Loaders
Frontladen
24005292
26605865
27906152
29206439
31506946
34007497
35707872
37508269
42009261
460010143
Rearunladen
19204234
21284692
22324922
23365151
25205557
27205998
28566297
30006615
33607409
36808114
XMINE D2 L5 L5 Underground machines All axles21604763
23945279
25115537
26285795
28356251
30606747
32137085
33757442
37808335
41409129
350/65
R1
5
XMINE D2 L5 L5 Loaders
Front
laden
2550
5623
2850
6284
2975
6560
3100
6836
3350
7387
3600
7938
3850
8489
4100
9041
4600
10143
5100
11246
Rearunladen
20504520
22755016
23755237
24755457
26755898
28756339
30756780
32757221
36758103
40758985
XMINE D2 L5 L5 Underground machines All axles23005072
25755678
26755898
28006174
30256670
32507166
34757662
37008159
41509151
460010143
14.5
R1
5
XMINE D2 L5 L5 Loaders
Frontladen
33007277
36508048
38258434
40008820
43509592
470010364
505011135
540011907
610013451
660014553
Rearunladen
26505843
29256450
30506725
32007056
34757662
37508269
40508930
43259537
487510749
527511631
XMINE D2 L5 L5 Underground machines All axles29756560
32757221
34507607
36007938
39008600
42259316
455010033
485010694
550012128
595013120
400/80
R1
5
Treadtype
Identi-fication
code
(11)
Explanations on how to choose the tyre and to determine the inflation pressuresRefer to explanations and methods allowing to determine the inflation pressures (10) S
ize
-
7/14/2019 Michelin Databook 2013
28/115
28
CHARACTERISTICS OF MICHELIN EARTHMOVER
TECHNICAL DATA - EARTHMOVER TYRES
20"9.00 R 20 Tube Type
XMINE D2 L5R *123382
63,7
27710,9
105441,5
48419,1
3203126,1
5164,3
9826
6.5 - B6.57.0T7.0
B 7.07.33VB7.57.5
-
A20553004
20 M
20x7.50 E20x7.50 (8)
12.00 R 20 Tube Type
XMINE D2 L5R123392
63,7
32312,7
117446,2
53421
3555140
5771,8
14639
8.08.5
8.5VB 8.58.50V9.00V9.0
-20 Q
20x8.50 (8)20x8.50 E
E20 Pilote (13/80 R 20) Tube Type
XLC C1240750
32212,7
105041,3
47618,7
3176125
1215,1
14037
7.33V - 7.5B 7.5 - 8.0B8.0 - 8.0V
8.00V - 8.5 BB8.5 - 8.50V
9.00V - 10.0 -
10.00V9.0
- 20 P
20x8.50 (8)
14.00 R 20 Tubeless
XMINE D2 L5R372138
63,7
36814,5
123648,7
55721,9
3745147,4
4860,5
17546
10.0010.00W
- 20 Q
20x10.00
COMMERCIALDESCRIPTION
TypesCAI (Part Number)
Max.dist./hourkm
Miles
TKPHTMPH
(1)
DIMENSIONAL CHARACTERISTICS (2)Measuring
RimApproved
Rims(3) - (4)
Tubeless
O-ringCAI(4)
Tube Type
Ref.
Flap(4)
Michelin dimensions
e D R RC Tread depth E Cap.
mm mm mm mm mm mm l
inches inches inches inches 32rd inches galon
-
7/14/2019 Michelin Databook 2013
29/115
TECHNICAL DATA - EARTHMOVER TYRES
29
TIRE LOADS IN KG/LB - TIRE PRESSURES IN BAR/PSI
20"Machine - Use
bar 3 4 5 6 7 8
psi 44 58 73 87 102 116
XMINE D2 * L5R L5R Loaders
Front tip.load
510011246
580012789
645014222
715015766
780017199
850018743
Frontladen
30006615
34007497
38008379
42009261
460010143
500011025
Rearunladen
24005292
27005954
30506725
33507387
37008159
40008820
XMINE D2 * L5R L5R Underground machines All axles27005954
30506725
34007497
38008379
41509151
45009923
9.0
0
R2
0
XMINE D2 L5R L5R Loaders
Front tip.load 580012789 680014994 780017199 885019514 985021719 1090024035
Frontladen
34007497
40008820
460010143
520011466
580012789
640014112
Rearunladen
27005954
32007056
37008159
41509151
465010253
510011246
XMINE D2 L5R L5R Underground machines All axles30506725
36007938
41509151
470010364
520011466
575012679
12.0
0
R2
0
Machine - Usebar 3 4 5 6 7 8 8,5 9
psi 44 58 73 87 102 116 123 131
XLC C1 C1 Compactors
10 km/h6 mph
25205557
31006836
36608070
42609393
484010672
542011951
571012591
600013230
15 km/h
9 mph
2240
4939
2760
6086
3260
7188
3790
8357
4310
9504
4820
10628
5000
11025
E20
Pilote
Machine - Usebar 3 4 5 5,5 6 6,5 7 8 8,5
psi 44 58 73 80 87 94 102 116 123
XMINE D2 L5R L5R Loaders
Frontladen
41409129
492010849
569012546
607013384
646014244
685015104
723015942
801017662
Rearunladen
24305358
31006836
37708313
41009041
44309768
477010518
510011246
577012723
XMINE D2 L5R L5R Underground machines All axles34807673
42009261
492010849
528011642
564012436
600013230
636014024
707015589
779317184
14.0
0
R2
0
Treadtype
Identi-fication
code
(11)
Explanations on how to choose the tyre and to determine the inflation pressuresRefer to explanations and methods allowing to determine the inflation pressures (10) S
ize
-
7/14/2019 Michelin Databook 2013
30/115
30
CHARACTERISTICS OF MICHELIN EARTHMOVER
TECHNICAL DATA - EARTHMOVER TYRES
20"16.00 R 20 Tubeless
XZL E2 173G123357
7043,5
43817,2
134352,9
61524,2
4080160,6
2734
31583
10.00W11.25
-
A20553004
20 V
20x10.00
20.5"525/65 R 20.5 Tubeless
XS E7 173F109421
(9)
52120,5
120047,2
54821,6
3640143,3
1721,4
33789
16.00- 19.5/20.5 UD
-
24 R 20.5 Tubeless
XS E7 176F109174
(9)
60223,7
137454,1
62024,4
4150163,4
1721,4
538142
18.00- 20.5 WAMD
-
COMMERCIALDESCRIPTION
TypesCAI (Part Number)
Max.dist./hourkm
Miles
TKPHTMPH
(1)
DIMENSIONAL CHARACTERISTICS (2)Measuring
RimApproved
Rims(3) - (4)
Tubeless
O-ringCAI(4)
Tube Type
Ref.
Flap(4)
Michelin dimensions
e D R RC Tread depth E Cap.
mm mm mm mm mm mm l
inches inches inches inches 32rd inches galon
-
7/14/2019 Michelin Databook 2013
31/115
TECHNICAL DATA - EARTHMOVER TYRES
31
TIRE LOADS IN KG/LB - TIRE PRESSURES IN BAR/PSI
20"Machine - Use
bar 2 3 4 5 6 7 8 8,5 9 10
psi 29 44 58 73 87 102 116 123 131 145
XZL E2 E2 Cranes and special machines
0 km/h0 mph
35807894
483010650
612513506
739016295
866019095
990021830
1120024696
1207526625
1295028555
1470032414
5 km/h3 mph
28506284
39508710
500011025
610013451
720015876
810017861
925020396
982521664
1040022932
1155025468
10 km/h6 mph
27506064
37508269
475010474
575012679
670014774
760016758
870019184
912520121
955021058
1060023373
20 km/h12 mph
25005513
32507166
42509371
500011025
600013230
686015126
760016758
807517805
855018853
950020948
30 km/h19 mph
22504961
30006615
37508269
45009923
525011576
600013230
686015126
722515931
759016736
40 km/h25 mph
20004410
27506064
35507828
42509371
500011025
575012679
650014333
683015060
716015788
50 km/h31 mph
19504300
27005954
35007718
42009261
490010805
570012569
635014002
672514829
710015656
65 km/h40 mph
18504079
26505843
34007497
41509151
485010694
555012238
630013892
665014663
700015435
80 km/h50 mph
18003969
26005733
33507387
41009041
480010584
550012128
625013781
655014443
685015104
90 km/h56 mph
17503859
25505623
33007277
40508930
475010474
545012017
620013671
650014333
16.0
0
R2
0
20.5"Machine - Use
bar 1 2 3 4 5 6 7 8
psi 15 29 44 58 73 87 102 116
XS E7 E7Desert conditions
80 km/h max
Roadin single
14503197
21504741
28506284
36007938
43009482
500011025
575012679
650014333
Trackin single
17003749
26005733
35007718
44509812
525011576
Sandin single
23005072
38508489
525011576
525/65
R2
0.5
Machine - Use bar 1 2 2,5 3 3,5 4 4,5 5 5,5 6psi 15 29 36 44 51 58 65 73 80 87
XS E7 E7Desert conditions
80 km/h max
Roadin single
19504300
29506505
34507607
40008820
45009923
501011047
552012172
605013340
657514498
710015656
Trackin single
25505623
36508048
42509371
475010474
530011687
585012899
640014112
675014884
710015656
Sandin single
35007718
535011797
640014112
710015656
24
R2
0.5
Treadtype
Identi-fication
code
(11)
Explanations on how to choose the tyre and to determine the inflation pressuresRefer to explanations and methods allowing to determine the inflation pressures (10) S
ize
-
7/14/2019 Michelin Databook 2013
32/115
32
CHARACTERISTICS OF MICHELIN EARTHMOVER
TECHNICAL DATA - EARTHMOVER TYRES
21"24 R 21 Tubeless
XZL E2 176G110257
(9)
60823,9
138854,6
63124,8
4200165,4
18.00/1.5
-
OR 6.6-21553213
21 WAM
17-20
24"12.00 R 24 Tube Type
XZH E3 ***123369
3521,7
11982
32112,6
125849,5
59123,3
3857151,9
3037,8
17145
7.33V8.00V
8.08.5
8.50V
- 24 Q
24/25x8.50 (8)
12.00 R 24 Tube Type
XK A L3 ***242110
148,7
33013
124449
56922,4
3775148,6
2126,5
15541
XMINE D2 L5R242046
63,7
128050,4
59423,4
3906153,8
5771,8
13836
XSM D2+ L5S
123647
4
2,5
325
12,8
1264
49,8
580
22,8
3840
151,2
140
37
7.33V7.5
8.00V8.08.5
8.50V
-
G25 (R1237)553012
24 Q
24/25x8.50 (8)
14.00 R 24 Tube Type
XK A E3 ***251590
148,7 401
15,8
138054,3
63825,1
4205165,6
2430,2 270
71XK D1 A E4 ***251592
1811,2
8458
141255,6
65725,9
4313169,8
3746,6
9.00V9.0
10.0/2.010.00W
- 24/25 T
13-24/25
14.00 R 24 Tube Type
XK A E3 ***251590
148,7
40115,8
138054,3
63825,1
4205165,6
2430,2
27071
XK D1 A E4 ***251592
1811,2
8458
141255,6
65725,9
4313169,8
3746,6
XSM D2+ L5S123597
42,5
139554,9
63625
4227166,4
5873,1
26670
9.00V9.0
10.0/2.0
10.00W
-24/25 TAM
24/25 T
13-24/2513-24/25 S (8)
14.00 R 24 TG Tubeless
XSNOPLUS L2 * TG123861
(6)
169,9
37214,6
136453,7
54521,5
3941155,2
2430,2
26470
XGL A2 L2 * TG123395
(6)
169,9
37114,6
136053,5
59223,3
4051159,5
2531,5
31082
8.00 TG SDC9.00/1.5 DC
10.00VA SDC
-
OR 2-25HEUPO553201
24 ST24 TD
13-24 DR
COMMERCIALDESCRIPTION
TypesCAI (Part Number)
Max.dist./hourkm
Miles
TKPHTMPH
(1)
DIMENSIONAL CHARACTERISTICS (2)Measuring
RimApproved
Rims(3) - (4)
Tubeless
O-ringCAI(4)
Tube Type
Ref.
Flap(4)
Michelin dimensions
e D R RC Tread depth E Cap.
mm mm mm mm mm mm l
inches inches inches inches 32rd inches galon
-
7/14/2019 Michelin Databook 2013
33/115
TECHNICAL DATA - EARTHMOVER TYRES
33
TIRE LOADS IN KG/LB - TIRE PRESSURES IN BAR/PSI
21"Machine - Use
bar 1 2 2,5 3 3,5 4 4,5 5 5,5 6
psi 15 29 36 44 51 58 65 73 80 87
XZL E2 E2Desert conditions
80 km/h max
Roadin single
19504300
29506505
34507607
40008820
45009923
501011047
552012172
605013340
657514498
710015656
Trackin single
25505623
36508048
42509371
475010474
530011687
585012899
640014112
675014884
710015656
Sandin single
35007718
535011797
640014112
24
R2
1
24"Machine - Use
bar 4 4,5 5 5,5 6 6,5 7 8 8,5
psi 58 65 73 80 87 94 102 116 123
XZH *** E3 E3 Transport Standard27005954
29506505
32007056
34757662
37508269
40008820
42509371
45009923
465010253
Machine - Usebar 2 2,5 3 3,5 4 4,5 5 5,5 6 7
psi 29 36 44 51 58 65 73 80 87 102
XSM D2+ L5SXMINE D2 L5R
L5SL5R Loaders
Front tip.load
39008600
460010143
520011466
585012899
655014443
715015766
780017199
845018632
910020066
1035022822
Frontladen
23005072
27005954
30506725
34507607
38508489
42009261
460010143
497510970
535011797
610013451
Rearunladen
18504079
21504741
24505402
27506064
31006836
33507387
37008159
40008820
43009482
490010805
XK A *** L3
XSM D2+ L5SXMINE D2 L5R
L3L5SL5R Underground machines All axles
2050
4520
2450
5402
2750
6064
3100
6836
3450
7607
3800
8379
4150
9151
4475
9867
4800
10584
5500
12128
12.0
0
R2
4
Machine - Usebar 4 5 5,5 6 6,5 7 8
psi 58 73 80 87 94 102 116
XK A *** E3XK D1 A *** E4
E3E4 Transport Standard
37508269
45009923
485010694
560012348
570012569
580012789
615013561
Machine - Usebar 2 2,5 3 3,5 4 4,5 5 5,5 6 7
psi 29 36 44 51 58 65 73 80 87 102
XSM D2+ L5S L5S Loaders
Front tip.load
555012238
640014112
730016097
815017971
910020066
1005022160
1090024035
1175025909
Frontladen
32507166
37508269
43009482
480010584
535011797
590013010
640014112
690015215
Rear
unladen
2600
5733
3000
6615
3450
7607
3850
8489
4300
9482
4700
10364
5100
11246
5500
12128
XK A *** E3XK D1 A *** E4XSM D2+ L5S
E3E4L5S
Underground machines All axles29506505
34007497
38508489
43009482
480010584
530011687
575012679
620013671
655014443
725015986
XSNOPLUS * TG L2XGL A2 * TG L2
L2L2 Loaders
Front tip.load
555012238
640014112
730016097
815017971
910020066
1005022160
1090024035
1175025909
Frontladen
32507166
37508269
43009482
480010584
535011797
590013010
640014112
690015215
Rearunladen
26005733
30006615
34507607
38508489
43009482
470010364
510011246
550012128
XSNOPLUS * TG L2XGL A2 * TG L2
L2L2 Graders All axles
23005072
27256009
31256891
35507828
14.0
0
R2
4
Treadtype
Identi-fication
code
(11)
Explanations on how to choose the tyre and to determine the inflation pressuresRefer to explanations and methods allowing to determine the inflation pressures (10) S
ize
-
7/14/2019 Michelin Databook 2013
34/115
34
CHARACTERISTICS OF MICHELIN EARTHMOVER
TECHNICAL DATA - EARTHMOVER TYRES
24"385/95 R 24 Tube Type
X-CRANE 170F778245
8049,7
37614,8
136153,6
63124,8
4153163,5
2329
28475
10.00W10.0
11.25/1.3
- 24/25 T
13-24/25
385/95 R 24 Tube Type
XMH S E2T 170E957157
7043,5
38915,3
136153,6
63224,9
4155163,6
2430,2
28475
XSNOPLUS 170E432272
7043,5
38615,2
135853,5
63525
4156163,6
28375
10.010.00W
- 24/25 T
13-24/25
COMMERCIALDESCRIPTION
TypesCAI (Part Number)
Max.dist./hourkm
Miles
TKPHTMPH
(1)
DIMENSIONAL CHARACTERISTICS (2)Measuring
RimApproved
Rims(3) - (4)
Tubeless
O-ringCAI(4)
Tube Type
Ref.
Flap(4)
Michelin dimensions
e D R RC Tread depth E Cap.
mm mm mm mm mm mm l
inches inches inches inches 32rd inches galon
-
7/14/2019 Michelin Databook 2013
35/115
TECHNICAL DATA - EARTHMOVER TYRES
35
TIRE LOADS IN KG/LB - TIRE PRESSURES IN BAR/PSI
24"Machine - Use
bar 5 6 7 8 9
psi 73 87 102 116 131
X-CRANE Cranes and special machines
30 km/h19 mph
475010474
544011995
612513506
681515027
750016538
40 km/h25 mph
43709636
500511036
563512425
627013825
690015215
50 km/h31 mph
42559382
487010738
549012105
610513462
672014818
60 km/h37 mph
41809217
478510551
539011885
599513219
660014553
65 km/h40 mph
40859007
467510308
527011620
586012921
645014222
70 km/h43 mph
39908798
457010077
514511345
572512624
630013892
80 km/h50 mph
38008379
43509592
490010805
545012017
600013230
90 km/h56 mph
35707872
40909018
460510154
512011290
564012436
100 km/h62 mph
32307122
37008159
41659184
463010209
510011246
385/95
R2
4
-14.0
0
R2
4
170F
XMH S E2TXSNOPLUS
E2T Cranes and special machines
30 km/h19 mph
486010716
588012965
646014244
700015435
780017199
40 km/h25 mph
463510220
561012370
616513594
667514718
745016427
50 km/h31 mph
44109724
534011775
586512932
635514013
710015656
60 km/h37 mph
41909239
507011179
556512271
603013296
672014818
65 km/h40 mph
40208864
486510727
534511786
579012767
645014222
70 km/h43 mph
37408247
45259978
497010959
538511874
600013230
80 km/h50 mph
30866805
37358236
41009041
44459801
495010915
90 km/h56 mph
26205777
31706990
34807673
37708313
42009261
100 km/h62 mph
22454950
27155987
29806571
32307122
36007938
385/95
R2
4
Treadtype
Identi-fication
code
(11)
Explanations on how to choose the tyre and to determine the inflation pressuresRefer to explanations and methods allowing to determine the inflation pressures (10) S
ize
-
7/14/2019 Michelin Databook 2013
36/115
36
CHARACTERISTICS OF MICHELIN EARTHMOVER
TECHNICAL DATA - EARTHMOVER TYRES
24"15.00 R 24 Pil (17/80 R 24) Tube Type
XLC C1252211
41516,3
133452,5
59223,3
4002157,6
2126,5
32085
9.00V9.010.0
10.0W
- 24/25 TAM
13-24/25 S (8)
16.00 R 24 Tubeless
XGL A2 L2 * TG123903
(6)
169,9
43517,1
150059,1
64625,4
4451175,2
2734
412109
10.00 VA SDC
-
OR 2-25HEUPO553201
24/25 VD
13-24 DR
25"14.00 R 25 Tubeless
XH D1 A E4 ***123331
2213,7
10270
40115,8
141055,5
65025,6
4291168,9
3847,9
27573
XH D1 A4 E4 ***123545
(8)
1811,2
8458
38015
64925,6
4288168,8
26570
10.00/1.511.25/1.3
-
OR 2-25HEUPO553201
24/25 TAM24/25 T
13-24/2513-24/25 S (8)
385/95 R 25 Tubeless
XMH S 170E254174
7043,5
39115,4
136153,6
63224,9
4155163,6
2430,2
27873
XSNOPLUS E2 170E705961
7043,5
38815,3
136553,7
4163163,9
2531,5
28074
9.50/1.7 CR10.00/1.511.25/1.3
-
OR 3-25 SULLA
553200OR 2-25HEUPO553201
24/25 TAM
24/25 T13-24/25
13-24/25 S (8)
COMMERCIALDESCRIPTION
TypesCAI (Part Number)
Max.dist./hourkm
Miles
TKPHTMPH
(1)
DIMENSIONAL CHARACTERISTICS (2)Measuring
RimApproved
Rims(3) - (4)
Tubeless
O-ringCAI(4)
Tube Type
Ref.
Flap(4)
Michelin dimensions
e D R RC Tread depth E Cap.
mm mm mm mm mm mm l
inches inches inches inches 32rd inches galon
-
7/14/2019 Michelin Databook 2013
37/115
TECHNICAL DATA - EARTHMOVER TYRES
37
TIRE LOADS IN KG/LB - TIRE PRESSURES IN BAR/PSI
24"Machine - Use
bar 3 4 5 6 6,5 7 7,5 8 8,5
psi 44 58 73 87 94 102 109 116 123
XLC C1 C1 Compactors
10 km/h6 mph
532011731
654014421
775017089
896519768
957021102
1018022447
1079023792
1139025115
1200026460
15 km/h9 mph
474010452
582012833
690015215
798017596
852018787
15.0
0
R2
4
Machine - Usebar 2 2,5 3 3,5 4 4,5 5
psi 29 36 44 51 58 65 73
XGL A2 * TG L2 L2 Loaders
Front tip.load
765016868
875019294
985021719
1090024035
1200026460
1310028886
1420031311
Frontladen
45009923
515011356
580012789
640014112
705015545
770016979
835018412
Rearunladen
36007938
41009041
465010253
510011246
565012458
615013561
670014774
XGL A2 * TG L2 L2 Graders All axles31506946
36257993
41259096
462510198
16.0
0
R
24
25"Machine - Use
bar 4 4,5 5 5,5 5,75 6 7 8,5
psi 58 65 73 80 83 87 102 123
XH D1 A *** E4XH D1 A4 *** E4
E4E4 Transport Standard
37508269
41009041
45009923
485010694
510011246
525011576
580012789
635014002 1
4.0
0
R2
5
Machine - Usebar 5 6 7 8 9
psi 73 87 102 116 131
XMH SXSNOPLUS E2 E2 Cranes and special machines
30 km/h19 mph
486010716
588012965
646014244
700015435
780017199
40 km/h25 mph
463510220
561012370
616513594
667514718
745016427
50 km/h31 mph
44109724
534011775
586512932
635514013
710015656
60 km/h37 mph
41909239
507011179
556512271
603013296
672014818
65 km/h40 mph 402088644865
107275345
117865790
127676450
14222
70 km/h43 mph
37408247
45259978
497010959
538511874
600013230
80 km/h50 mph
30866805
37358236
41009041
44459801
495010915
90 km/h56 mph
26205777
31706990
34807673
37708313
42009261
100 km/h62 mph
22454950
27155987
29806571
32307122
36007938
385/9
5
R2
5
170E
Treadtype
Identi-fication
code
(11)
Explanations on how to choose the tyre and to determine the inflation pressuresRefer to explanations and methods allowing to determine the inflation pressures (10) S
ize
-
7/14/2019 Michelin Databook 2013
38/115
38
CHARACTERISTICS OF MICHELIN EARTHMOVER
TECHNICAL DATA - EARTHMOVER TYRES
25"385/95 R 25 Tubeless
X-CRANE + 170F682834
(7)
8049,7
38015
136553,7
63324,9
4165164
2329
28074
X-CRANE 170F296917
8049,7
9.50/1.7 CR10.00/1.511.25/1.3
-OR 3-25 SULLA
553200
OR 2-25HEUPO553201
24/25 TAM24/25 T
13-24/2513-24/25 S (8)
15.5 R 25 Tubeless
XTL A L2 *123415
(5)
169,9
39715,6
127250,1
55321,8
3788149,1
2531,5
24565
XH A L3 *123008
169,9
40415,9
127050
55521,9
3789149,2
2632,8
XMINE D2 L5R *252905
63,7
41816,5
133652,6
60924
4049159,4
6075,6
21557
12.00/1.312.00/1.3DC13.00/1.3DC
-
OR 2-25HEUPO553201
25 SAM
15-24/25
16.00 R 25 Tubeless
XH D1 A E4 **123350
2817,4
164112
46218,2
154060,6
70427,7
4672183,9
4354,2
56422,2
380100
X-QUARRY E4R **692021
169,9
9364
43717,2
154260,7
70727,8
4683184,4
4860,5
11.25/2.013.00/2.0
-
OR 3-25 SULLA553200
24/25 VAM
14-24/25
16.00 R 25 Tubeless
XMINE D2 L5R261025
63,7
45718
153060,2
69927,5
4641182,7
7392
56422,2
32085
11.25/2.013.00/2.0
-
OR 3-25 SULLA
553200
24/25 VAM
14-24/25
COMMERCIALDESCRIPTION
TypesCAI (Part Number)
Max.dist./hourkm
Miles
TKPHTMPH
(1)
DIMENSIONAL CHARACTERISTICS (2)Measuring
RimApproved
Rims(3) - (4)
Tubeless
O-ringCAI(4)
Tube Type
Ref.
Flap(4)
Michelin dimensions
e D R RC Tread depth E Cap.
mm mm mm mm mm mm l
inches inches inches inches 32rd inches galon
-
7/14/2019 Michelin Databook 2013
39/115
TECHNICAL DATA - EARTHMOVER TYRES
39
TIRE LOADS IN KG/LB - TIRE PRESSURES IN BAR/PSI
25"Machine - Use
bar 5 6 7 8 9
psi 73 87 102 116 131
X-CRANE +X-CRANE Cranes and special machines
30 km/h19 mph
475010474
544011995
612513506
681515027
750016538
40 km/h25 mph
43709636
500511036
563512425
627013825
690015215
50 km/h31 mph
42559382
487010738
549012105
610513462
672014818
60 km/h
37 mph
4180
9217
4785
10551
5390
11885
5995
13219
6600
14553
65 km/h40 mph
40859007
457510088
527011620
586012921
645014222
70 km/h43 mph
39908798
457010077
514511345
572512624
630013892
80 km/h50 mph
38008379
43509592
490010805
545012017
600013230
90 km/h56 mph
35707872
40909018
460510154
512011290
564012436
100 km/h62 mph
32307122
37008159
41659184
463010209
510011246
385/95
R2
5
-14.0
0
R2
5
170F
Machine - Usebar 2 2,5 3 3,5 4 4,5
psi 29 36 44 51 58 65
XTL A * L2XH A * L3
XMINE D2 * L5R
L2L3
L5RLoaders
Front tip.load
590013010
680014994
770016979
855018853
930020507
1030022712
Frontladen
37008159
42509371
480010584
535011797
580012789
645014222
Rearunladen
29506505
34007497
38508489
43009482
465010253
515011356
XTL A * L2XH A * L3
XMINE D2 * L5R
L2L3
L5RGraders All axles
23255127
26505843
30006615
XMINE D2 * L5R L5R Underground machines All axles33507387
38508489
43009482
480010584
520011466
580012789
15.5
R2
5
Machine - Use bar 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8psi 51 58 65 73 80 87 94 102 109 116
XH D1 A ** E4 E4 Transport Standard5000
110255450
120175900
130106400
141126850
151047300
160977550
166487750
170898000
17640
X-QUARRY ** E4R E4R Quarry transport 30 km/h19 mph5300
116875800
127896300
138926800
149947300
160977800
17199
Machine - Usebar 2 3 4 5 6 7
psi 29 44 58 73 87 102
XMINE D2 L5R L5R Loaders
Front tip.load
765016868
985021719
1200026460
1420031311
1630035942
1855040903
Frontladen
45009923
580012789
705015545
835018412
960021168
1090024035
Rearunladen
36007938
465010253
565012458
670014774
770016979
870019184
XMINE D2 L5R L5R Underground machines All axles40508930
520011466
635014002
750016538
865019073
980021609
16.0
0
R2
5
Treadtype
Identi-fication
code
(11)
Explanations on how to choose the tyre and to determine the inflation pressuresRefer to explanations and methods allowing to determine the inflation pressures (10) S
ize
-
7/14/2019 Michelin Databook 2013
40/115
40
CHARACTERISTICS OF MICHELIN EARTHMOVER
TECHNICAL DATA - EARTHMOVER TYRES
25"445/95 R 25 Tubeless
XL B 177E282741
7043,5
42216,6
148458,4
68026,8
4506177,4
2936,5
35092
11.00/1.7 CR11.25/2
-
OR 3-25 SULLA553200
24/25 VAM
14-24/25
445/95 R 25 Tubeless
X-CRANE + 174F738428
8049,7
44217,4
148558,5
69327,3
4542178,8
2531,5
380100
X-CRANE 174F297069
(8)
8049,7
11.00/1.7 CR11.25/2
-
OR 3-25 SULLA553200
24/25 VAM
14-24/25
COMMERCIALDESCRIPTION
TypesCAI (Part Number)
Max.dist./hourkm
Miles
TKPHTMPH
(1)
DIMENSIONAL CHARACTERISTICS (2)Measuring
RimApproved
Rims(3) - (4)
Tubeless
O-ringCAI(4)
Tube Type
Ref.
Flap(4)
Michelin dimensions
e D R RC Tread depth E Cap.
mm mm mm mm mm mm l
inches inches inches inches 32rd inches galon
-
7/14/2019 Michelin Databook 2013
41/115
TECHNICAL DATA - EARTHMOVER TYRES
41
TIRE LOADS IN KG/LB - TIRE PRESSURES IN BAR/PSI
25"Machine - Use
bar 2 3 4 5 6 7 8 9
psi 29 44 58 73 87 102 116 131
XL B Cranes and special machines
30 km/h19 mph
29256450
41009041
500011025
585012899
675014884
765016868
860018963
950020948
40 km/h25 mph
28006174
39008600
477510529
560012348
645014222
730016097
820018081
905019955
50 km/h31 mph
26505843
37258214
455010033
530011687
615013561
695015325
780017199
860018963
65 km/h40 mph
24005292
33757442
41259096
485010694
560012348
635014002
715015766
780017199
70 km/h43 mph
22504961
31506946
38508489
45009923
520011466
590013010
660014553
730016097
80 km/h50 mph
18504079
26005733
31506946
37008159
42509371
485010694
540011907
600013230
90 km/h56 mph
15753473
22004851
27005954
31506946
36508048
41509151
460010143
510011246
100 km/h62 mph
13502977
19004190
23005072
27005954
31206880
35507828
39508710
44009702
445/95
R2
5-
16.0
0
R2
5
Machine - Usebar 5 6 7 8 9
psi 73 87 102 116 131
X-CRANE +X-CRANE Cranes and special machines
30 km/h19 mph
534011775
609513439
685015104
761516791
837518467
40 km/h25 mph
491010827
560512359
630013892
700515446
770516990
50 km/h31 mph
478010540
546012039
614013539
682015038
750516549
65 km/h40 mph
459010121
524011554
589012987
654514432
720515887
70 km/h43 mph
44859889
512011290
575512690
639514101
703515512
80 km/h50 mph 42709415 487510749 548012083 609013428 670014774
90 km/h56 mph
40158853
458010099
515011356
572512624
630013892
100 km/h62 mph
37758324
43059493
484010672
538011863
592013054
445/95
R2
5
-16.0
0
R2
5
-174F
Treadtype
Identi-fication
code
(11)
Explanations on how to choose the tyre and to determine the inflation pressuresRefer to explanations and methods allowing to determine the inflation pressures (10) S
ize
-
7/14/2019 Michelin Databook 2013
42/115
42
CHARACTERISTICS OF MICHELIN EARTHMOVER
TECHNICAL DATA - EARTHMOVER TYRES
25"17.5 R 25 Tubeless
XSNOPLUS L2T * TG123871
169,9
44817,6
134252,8
58022,8
3987157
2835,3
33388
XTL A L2 *123425
(5)
169,9
45918,1
133752,6
57422,6
3964156,1
33288
XH A L3 *123009
169,9
44817,6
134052,8
58222,9
3989157
2936,5
32887
XK A L3 **263251 148,7 48118,9 134653 60023,6 4045159,3 2531,5 30079
XLD D2 A L5T *123317
106,2
45417,9
140655,4
61924,4
4206165,6
6379,4
30581
XMINE D2 L5R263220
(8)
63,7
47118,5
140255,2
63625
4237166,8
6581,9
28575
XMINE D2 L5 **009071
63,7
48018,9
64125,2
4254167,5
XSM D2+ L5S123707
(8)
42,5
45618
139554,9
59823,5
4131162,6
7898,3
27272
XSM D2+ L5S **218365 42,5139755
64125,2
4246167,2
14.00/1.5
-
OR 2-25HEUPO553201
24/25 TAM
16-24/25 (8)
445/80 R 25 Tubeless
XL B 170E757059
7043,5
43517,1
135653,4
61924,4
4112161,9
2632,8
34090
14.00/1.514.00/1.7 CR
-OR 3-25 SULLA
553200
OR 2-25HEUPO553201
24/25 TAM
16-24/25 (8)
COMMERCIALDESCRIPTION
TypesCAI (Part Number)
Max.dist./hourkm
Miles
TKPHTMPH
(1)
DIMENSIONAL CHARACTERISTICS (2)Measuring
RimApproved
Rims(3) - (4)
Tubeless
O-ringCAI(4)
Tube Type
Ref.
Flap(4)
Michelin dimensions
e D R RC Tread depth E Cap.
mm mm mm mm mm mm l
inches inches inches inches 32rd inches galon
-
7/14/2019 Michelin Databook 2013
43/115
TECHNICAL DATA - EARTHMOVER TYRES
43
TIRE LOADS IN KG/LB - TIRE PRESSURES IN BAR/PSI
25"Machine - Use
bar 2 2,5 3 3,5 4,25 4,5 5 5,5 6 6,5
psi 29 36 44 51 62 65 73 80 87 94
XSNOPLUS * TG L2TXTL A * L2XH A * L3
XLD D2 A * L5TXMINE D2 L5RXSM D2+ L5S
L2TL2L3L5TL5RL5S
Loaders
Front tip.load
730016097
815017971
910020066
1000022050
1135025027
1175025909
Frontladen
455010033
510011246
570012569
625013781
710015656
735016207
Rearunladen
36508048
41009041
455010033
500011025
570012569
590013010
XK A ** L3 L3 Loaders
Front tip.load