Download - Mitel to Nokia E71
-
8/9/2019 Mitel to Nokia E71
1/12
Configure the Mitel 3300 ICP for use with the Nokia E71 Mobile Phone
-
8/9/2019 Mitel to Nokia E71
2/12
Table of Contents
Overview .............................................................................................................................................3
Software & Hardware Setup .......................................................................................................3
Device Limitations ..........................................................................................................................3
3300 Setup Notes ............................................................................................................................4
Network Requirements .......................................................................................................................................... 4
Assumptions for the 3300 ICP programming .............................................................................................. 4
Licensing and Option Selection - SIP Licensing ........................................................................................ 5
Multiline IP Set Configuration............................................................................................................................. 6
Class of Service Assignment .............................................................................................................................. 7
SIP Device Capabilities Assignment ............................................................................................................... 9
Station Service Assignment .............................................................................................................................. 10
Multiline Set Key Assignment........................................................................................................................... 11
Nokia E71 Mobile Phone Setup Notes..................................................................................12
-
8/9/2019 Mitel to Nokia E71
3/12
Overview
This document provides a reference for configuring the Mitel 3300 ICP to host the Nokia E71 Mobile Phone. The
different devices can be configured in various configurations depending on your VoIP solution. This document
covers a basic setup with required option setup.
Software & Hardware Setup
This was the test setup to generate a basic SIP call between the Nokia E71 Mobile Phone SIP device and the 3300
ICP.
Manufacturer Variant Software Version
Mitel 3300 ICP MXe platform 9.0.1.20
Nokia Nokia E71 Mobile Phone 110.07.127 (09-10-2008)
Device Limitations
This is a list of problems or not supported features when the Nokia E71 Mobile Phone is connected to the Mitel
3300.
Feature Problem Description
MWI Nokia E71 does not support MWI
Conference Nokia E71 does not support device-based conference
Call Forwarding Nokia E71 does not support device-based call forwarding
Call hold There is no music played on Nokia E71
Teleworker Nokia does not register and thus does not work with Teleworker
-
8/9/2019 Mitel to Nokia E71
4/12
3300 Setup Notes
The following steps show how to program a 3300 ICP to connect with the Nokia E71 Mobile Phone.
Network Requirements
There must be adequate bandwidth to support the voice over IP. As a guide, the Ethernet bandwidth isapprox 85 Kb/s per G.711 voice session and 29 Kb/s per G.729 voice session (assumes 20ms
packetisation). As an example, for 20 simultaneous SIP sessions, the Ethernet bandwidth consumption will
be approx 1.7 Mb/s for G.711 and 0.6Mb/s. Almost all Enterprise LAN networks can support this level of
traffic without any special engineering. Please refer to the 3300 Engineering guidelines for further
information.
For high quality voice, the network connectivity must support a voice-quality grade of service (packet loss
-
8/9/2019 Mitel to Nokia E71
5/12
Licensing and Option Selection - SIP Licensing
Ensure that the 3300 ICP is equipped with enough SIP Device licences for the connection of SIP end points. This
can be verified within the License and Option Selection form.
Figure 1 License and Option Selection
-
8/9/2019 Mitel to Nokia E71
6/12
Multiline IP Set Configuration
On the Mitel 3300 ICP, a SIP device can be programmed either in the User Configuration form or the Multiline IP
Set Configuration form and are programmed as a Generic SIP Phone. Enterprise Manager can also be used to
provision where this application is installed.
The Login PIN is the SIP authentication password and the username is the DN. The Number and Login PIN must
match the information in the Nokia E71 Mobile Phone configuration. All other field names should be programmed
according to the site requirements or left at default.
Figure 2 Multiline IP Set Configuration
-
8/9/2019 Mitel to Nokia E71
7/12
Class of Service Assignment
The Class of Service Options Assignment form is used to create or edit a Class of Service and specify its options.
Classes of Service, identified by Class of Service numbers, are referenced by the Station Service Assignment form
for the SIP devices.
Figure 3 Class of Service Assignment
-
8/9/2019 Mitel to Nokia E71
8/12
Figure 4 Class of Service Assignment (Cont)
-
8/9/2019 Mitel to Nokia E71
9/12
SIP Device Capabilities Assignment
This form provides configuration options that can be applied to various types of SIP devices. The association
between the SIP device and the form is similar to how the Class of Service options work. The SIP Device
Capabilities number provides a SIP profile that can be applied to particular SIP devices to allow for alternate
capabilities as recommended through the Mitel interop process.
In the Device Capabilities form, program a SIP Device Capabilities Number for the Nokia E71 Mobile Phone
device. Ensure that Replace System based with Device based In-Call Feature is set to Yes.
For call hold, Prevent the use of IP Address 0.0.0.0 in SDP Messages and Force sending SDP in initial Invite
message have to be enabled.
Figure 5 SIP Device Capabilities Assignment
-
8/9/2019 Mitel to Nokia E71
10/12
Station Service Assignment
Use the Station Service Assignment form to assign the previously configured Class of Service and SIP Device
Capability number to each of the Nokia E71 Mobile Phones in the 3300.
Select the Nokia E71 Mobile Phone device number then select Change. Enter the previously configured SIP DeviceCapability number and Class of Service for Day, Night 1 & Night 2.
Figure 6 Station Service Assignment
-
8/9/2019 Mitel to Nokia E71
11/12
Multiline Set Key Assignment
You use the Multiline Set Key Assignment form to assign the line type, ring type, and directory number to each line
selected on the Nokia E71 Mobile Phone device.
Figure 7 Multiline Set Key Assignment Form
-
8/9/2019 Mitel to Nokia E71
12/12
Nokia E71 Mobile Phone Setup Notes
The following steps show how to program the Nokia E71 Mobile Phone to interconnect with the 3300 ICP.
1. SIP Settings
On Nokia E71 Mobile phone: Menu ToolSettingsConnectionSIP Settings
A). Main Settings
Profile Name: 3211
Service profile: IETF
Default access point: Connection2 (Access Point)
Public user name: [email protected] (Extension Number @3300ICP_IP_address)
Use compression: No
Registration: Always on (When needed is deregistration)
Use security: No
B). Proxy Server Settings
Proxy server address: 192.168.101.10 (3300 ICP address)
Realm: sipint1 (Need to be 3300 name configured in Network Element assignment)
User name: 3211
Password: SIP Password. It must match the one in 3300ICP
Allow loose routing: Yes
Transport type: UDP
Port: 5060
C). Registrar Server Settings
Registrar server address: 192.168.101.10 (3300 ICP address)
Realm: sipint1 (Need to be 3300 name configured in Network Element assignment)
User name: 3211Password: SIP Password. It must match the one in 3300ICP
Transport type: UDP
Port: 5060
2. Internet Telephone (net call setting): Menu ToolSettingsConnectionInternet tel.
Assigning SIP Profile to Internet Telephone (net call setting)
Name: 3211
SIP Profiles: 3211
3. Communication: MenuCommunic.Internet tel.
Select Connection2 and Press Option to change service, selecting net call service (3211) from the list.
4. Registration
Registration: Selecting Always on, the phone will be registered.
Selecting When needed, the phone will be deregistered.