Motive Group HPLV Samson Conveyor Belt Cleaner
Motive Group HPLV “Samson” Conveyor Belt Cleaners
approach to the continual problem of effectively cleaning conveyor belt
and removing carry back without damage or wear. Instead of using
blades, brushes and scrapers to remove product off the belt our unit uses
High Pressure Low Volume water jet nozzles to clean the return run of the
belt. By keeping the amount of water used very low and directing the
cleaning discharge back into the product flow, the system operates
without any product spillage or build-up with the advantage of a small
amount of water introduced into the product stream acting as a dust
suppressant.
HPLV Advantages:
• Simple Installation and Operation.
• Eliminates Carry Back, Belt Wear and Damage therefor
increasing belt life.
• No Replacement or Adjustment of Scraper Blades or Brushes
which leads to reduced down time and maintenance costs.
• No under belt spillage and expensive cleanup cost
• Assists in Dust Suppression.
• Possible Multiple Spray Bar Installation available from the one
unit.
• Plug and Play to Site PLC.
Proven Ability and World Class Design:
The new HPLV “Samson” units were designed jointly between Motive
Traction and a Major Iron Ore Company Prod
during 2012/13. After installation of a trial Standard HPLV
month period in 2011/12 and following several design and operational
improvements in 2012, the “Samson” HPLV
belt cleaning, process management and dust
area, bringing us into a new era of conveyor belt cleaning with the
introduction of the HPLV “Samson” Conveyor Belt Cleaner
Motive Traction has not previously offered other clients the HPLV Samson
Conveyor Belt Cleaner and we are pleased to now offer this outstanding
product to the general marketplace.
The New Approch – Proven Ability
Conveyor Belt Cleaning at its best.
Contact Us Today!
Motive Group HPLV Samson Conveyor Belt Cleaner
Belt Cleaners are the new
approach to the continual problem of effectively cleaning conveyor belt
ithout damage or wear. Instead of using
blades, brushes and scrapers to remove product off the belt our unit uses
High Pressure Low Volume water jet nozzles to clean the return run of the
belt. By keeping the amount of water used very low and directing the
cleaning discharge back into the product flow, the system operates
up with the advantage of a small
amount of water introduced into the product stream acting as a dust
n and Operation.
Eliminates Carry Back, Belt Wear and Damage therefore
No Replacement or Adjustment of Scraper Blades or Brushes
which leads to reduced down time and maintenance costs.
No under belt spillage and expensive cleanup costs.
Multiple Spray Bar Installation available from the one
re designed jointly between Motive
Product Development Team
Standard HPLV unit during a 12
2 and following several design and operational
e “Samson” HPLV unit now provides effective
dust minimization in its working
new era of conveyor belt cleaning with the market
Conveyor Belt Cleaner in early 2013.
Motive Traction has not previously offered other clients the HPLV Samson
nveyor Belt Cleaner and we are pleased to now offer this outstanding
Proven Ability – World Class Design
Conveyor Belt Cleaning at its best.
Contact Us Today!
HPLV Internal Piping
System
Duel Filtering System
World Recognized Parts
High Performance Water
Saving Spray Bar
Motive Traction Pty Ltd
2738 Booral Road,
2425 Australia
Mail: PO Box 19 Stroud
2425 Australia
Phone: + 61 2 4994 9999
Contact: Chris Taylor
Mobile/Cell
+ 61 427 949 152
Office
+61 2 4994 9999
Email: chris@motive
traction.com.au
HPLV Internal Piping
System
Duel Filtering System
World Recognized Parts
High Performance Water
Saving Spray Bar
Motive Traction Pty Ltd
2738 Booral Road, Booral NSW
Australia
Mail: PO Box 19 Stroud NSW
Australia
4994 9999
Chris Taylor
/Cell:
27 949 152
Office:
2 4994 9999
@motive-
traction.com.au