Part No. Description Airflowm³/h
Voltage(V)
Frequency(Hz)
Phase Rated Current (A)
Power(kW)
Connection Ø in/out (mm)
Weight(kg)
AES Part Code
14510122 N24 Fan 1PH 400-1500 115/230 50 1 13.6/6.5 0.75 160/160 17 DF-CF24-001
Capacity up to 1500
Motor Power 0.75 kW
Speed 2780 rpm
Electrical Specification 110-120 Single Phase 50Hz220-240 Single Phase 50Hz
Current at market Voltage 1PH: 8.7/4.35 A
Degree of Protection IP 55
Weight 17 kg
Creating Safer Workplaces
Datasheet Reference No: DF-CF24(1)
Dust and Fume Extraction
NEDERMAN N24 FAN 50Hz Single Phase
[email protected] 0141 892 6690 aessolutions.co.uk
AES OFFER INSTALLATION AND SERVICE SUPPORT FOR ALL EQUIPMENT
DESCRIPTIONNederman Fan N24 is a centrifugal fan designed for use with extraction products. The fan can also be mounted on a stand which is available as an accessory.
• Working temperature: max. 60 °C• Ambient temperature: -30°C to +40°C• Impeller with radial tip blades• Fan casings: galvanised sheet steel• Impeller: die cast aluminium• Surface treatment: epoxypolyester powder paint• The fan is manufactured in accordance with
the following standards or other normative documents: 98/37/EC, 2006/95/EC and 2004/108/EC
AES PART CODE/ORDERING TABLE
POWER/EFFICIENCY/SOUND GRAPHS
TECHNICAL SPECIFICATION
DIMENSIONS/PRESSURE DROP GRAPH
Part No. Description Airflowm³/h
Voltage(V)
Frequency(Hz)
Phase Rated Current (A)
Power(kW)
Connection Ø in/out (mm)
Weight(kg)
AES Part Code
14510422 N24 Fan 3PH 400-1750 230/400 50 3 3.7/2.2 0.90 160/160 17 DF-CF24-003
Capacity up to 1750
Motor Power 0.90 kW
Speed 2820 rpm
Electrical Specification 220-240 Single Phase 50Hz380-420 Three Phase 50Hz
Current at market Voltage 1PH: 3.7/2.13 A
Degree of Protection IP 55
Weight 17 kg
Creating Safer Workplaces
Datasheet Reference No: DF-CF24(3)
Dust and Fume Extraction
NEDERMAN N24 FAN 50Hz Three Phase
[email protected] 0141 892 6690 aessolutions.co.uk
AES OFFER INSTALLATION AND SERVICE SUPPORT FOR ALL EQUIPMENT
DESCRIPTIONNederman Fan N24 is a centrifugal fan designed for use with extraction products. The fan can also be mounted on a stand which is available as an accessory.
• Working temperature: max. 60 °C• Ambient temperature: -30°C to +40°C• Impeller with radial tip blades• Fan casings: galvanised sheet steel• Impeller: die cast aluminium• Surface treatment: epoxypolyester powder paint• The fan is manufactured in accordance with
the following standards or other normativedocuments: 98/37/EC, 2006/95/EC and2004/108/EC
AES PART CODE/ORDERING TABLE
POWER/EFFICIENCY/SOUND GRAPHS
TECHNICAL SPECIFICATION
DIMENSIONS/PRESSURE DROP GRAPH
