P/N -540-INST-FUL Rev 4AYRD1
Nest x Yale LockInstallation and Programming Guide
Before you begin
for step-by-step installation
instructions & to register
your product
DOWNLOAD
THE BILT APP
Keypad
Check(Set / Continue)
Settings
Speaker
Failsafe 9 voltBattery Connection(Use Alkaline battery)
Warning StatusIndicator
Back button
Low BatteryIndicator
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT AND VOID THE FACTORY WARRANTY
Battery CoverKey
AA AlkalineBatteries
Deadbolt
Strike Plate
InsideMounting PlateInside Lock
Battery Cover
000XXXXXXX0000000
P/N -540-INST-FUL Rev 4AYRD2
1"[25mm]
Dia.
CL FO
LD
OV
ER
DO
OR
ED
GE
CL
CL
CL
CL1"[25mm]
Dia.
2-1/8"[54mm]
Thru HoleDia
2-1/8"[54mm]
Thru HoleDia
CAUTION:If printed from electronic
Measure ruler to check scalefile set print s 1:1cale to
2" 1" 0"
50mm 25mm
0"
25m
m50
mm
75m
m
2"3"
1"
CU
T L
INE
For 1-3/8"[35mm]
Thick Door 2-3/8" [60mm] Backset
2-3/4" [70mm] BacksetFor 1-3/4"[44.5mm]
Thick Door
Template
Tools Needed
Utility Knife
Drill Wood MortiseChisel
PencilTape
Measure
Level
Provided Fasteners
StandardPhillips HeadScrewdriver
OR ORSilver
for2 to 2-1/4"
Door Thickness
BlackforStandard
1-3/4"Door Thickness
Greenfor
1-3/8"Door Thickness
Strike Plateand
Latch Screws
Inside LockScrewsTools necessary only for new doors
or adjusting existing prep.
OptionalSecurity
Strike PlateScrews
Before you begin, open door and remove your existing deadbolt.
Before you begin, double check your door prep measurements.
EXISTING
2-3/8" or 2-3/4"(60mm or 70mm)
Backset
2-1/8" (54mm)Diameter
EXISTING
SeeDoor PrepTemplate
5-1/2" (140mm) StandardCheck clearance withlower hardware if thisdimension is less than
5-1/2" (140mm).
1" (25mm)Deep
!
Drill holes 1/2 waythrough door then
complete from other sideto prevent splitting.
2-1/8"(54mm)
Dia.
2-3/8" (60mm)or
2-3/4" (70mm)Backset
1"(25mm)
Dia.
FrameSee
Door PrepTemplate
Insideof Door
Frame
Necessary only for new doors or adjusting existing prep.Before you begin, prepare door & frame.
P/N -540-INST-FUL Rev 4AYRD3
P/N -540-INST-FUL Rev 4AYRD4
2-3/8" (60mm) Position
UP
2-3/4" (70mm)Position
x2
Installing Deadbolt1
OR
Press
Pull
UP
Bolt must be in retracted(unlocked) position.
Mechanism will be horizontal.Note UP arrow on deadbolt.
!
Mechanism(Horizontal Orientation)
*Backset
2-3/8" (60mm)Backset
2-3/4" (70mm)Backset
*2-3/8" (60mm) or 2-3/4" (70mm)
Installing Strike Plate2Frame
x2
x2
Choosestandard
strike platescrews orsecurityscrews.
!
P/N -540-INST-FUL Rev 4AYRD5
Installing Keypad
Outside of DoorInside of Door
3
Bolt must be in retracted(unlocked) position. Notehorizontal orientation of
mechanism.
!
Installing Interior Mounting Plate
Choosethrough boltappropriate
for your doorthickness.
See Page 3.
x2
!
4
Inside of Door
Make sureplate and
keypad arelevel beforetighteningthroughbolts.
!
P/N -540-INST-FUL Rev 4AYRD6
Removing Battery Cover5
000XXXXXXX0000000
Attaching the Cable6Make sure toconnect cable
with black markside up.
!
Secure cablein hooks.
!
P/N -540-INST-FUL Rev 4AYRD7
Installing Inside Lock7
x2Make sure
bolt isretracted.
!000XXXXXXX0000000
Make sure inside lock is properly seatedonto bottom of mounting plate and
excess cable is tucked into lock cavity.!
Testing Operation8
Close door andcheck boltoperation.
Bolt should rotate freely and easily.Go back to step 3 to recheck
installation if there is resistance.
000XXXXXXX0000000
P/N -540-INST-FUL Rev 4AYRD8
Installing Cover10
Congratulations, you've installed the Nest x Yale Lock!
000XXXXXXX0000000
Programming Instructions
Touch Yale logo to wake lock.You will be guided to set up the Master Passcode by following the audioinstructions on the lock. Once installation is complete, download the Nest App toadd the lock to your Nest account.
Additional passcodes and further programming can be done in the Nest app. Notethat the Master Passcode may also need to be set within the app. Once the Nest xYale Lock is paired with the Nest app, 20 passcodes will be available for use.
For written programming/troubleshooting instructions and instructions in otherlanguages, visit www.ShopYaleHome.com/NestYaleLock/Info
Failsafe 9 voltBattery Connection(Use Alkaline battery)
Product Support Tel: 1-855-213-5841 • www.yalehome.comYale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.
ASSA ABLOY is the global leader in door opening solutions,dedicated to satisfying end-user needs for security, safety and convenience.
Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group Company. Nest is a trademark of Nest Labs, Inc.© Copyright 2018, Yale Security Inc., an ASSA ABLOY Group Company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.Certified ANSI/BHMA A156.36 Grade 2 | Nest Labs Designed in the US nest.com Built in China | Patent & TM: nest.com/legal/ip-and-other-notices | Open source: nest.com/legal/compliance
Installing Batteries/Handing the Lock9“Hi from
Yale and Nest.”
Door must be closedprior to inserting
batteries.
Lock automaticallycalibrates itself foruse after battery
installation.
000XXXXXXX0000000