Download - NEW CATALOGUE PART 2
2120
SPECIFICATIONSpecificationISO 7840 A1
Application Fuel hose for marine craft
TubeBlack fuel resistant NBR rubber
ReinforcementSynthetic textile
SpecificationSAEJ2006R1
Application Wet exhaust hose for marine craft
TubeBlack, exaust gas Salt water resistant EPDM Rubber
ReinforcementSynthetic textile fabric, steel wire Helix
Cover Black, abrasion, ozone, weather, heat and oil resistant neoprene rubber
Temperature Range -35ºc to +100ºc
Safety Factor3:1
BrandingW=ISO7840 A1 Fuel hose ID/OD QTR/YR
Cover Black, corrugated, resistant to heat, salt water, ozone and abrasion EPDM rubber
Temperature Range -30ºc to +100ºc (peaks up to 115ºc) Safety Factor3:1
BrandingW=SAEJ2006R1 Marine wet exhaust hose. ID. QTR/YR
SPECIFICATION
SPECIFICATION
SpecificationISO 7840 A2
Application Fuel hose for marine craft
TubeBlack fuel resistant NBR rubber
ReinforcementSynthetic textile fabric twin steel wire helix and one conductive copper wire
Cover Black, abrasion ,ozone, weather, heat and oil resistant neoprene rubber
Temperature Range -35ºc to + 100ºc
Safety Factor3:1
BrandingW=ISO 7840 A2 marine fuel hose
SPECIFICATION
Application Conveyance of effluent
TubeBlack, SBR rubber
ReinforcementSynthetic textile fabrics Steel wire helix betweenlayers
Cover White EPDM rubber
Temperature Range -20ºc to +70ºc
Safety Factor3:1
BrandingW=Marine sanitation (not for potable water)
MARINE SECTION 6
Marine Fuel Hose Type A1 Marine Exhaust Hose (Lloyds Approved)
Marine Fuel Hose Type A2Sanitation Hose (White cover)
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
MF010B005MI 3/16” 5 12 145 10 50 0.146 100
MF010B006MI ¼” 6 13 145 10 60 0.162 100
MF010B008MI 5/16” 8 16 145 10 80 0.235 100
MF010B010MI 3/8” 10 18 145 10 100 0.274 100
MF010B013MI ½” 13 22 145 10 130 0.383 100
MF010B016MI 5/8” 16 25 145 10 160 0.450 50
MF010B019MI ¾” 19 29 145 10 190 0.582 50
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
ME004B032KS 1 ¼” 32 41 60 4 64 0.835 40
ME004B038KS 1 ½” 38 47 60 4 76 0.975 40
ME004B045KS 1 3/4” 45 54 60 4 90 1.228 40
ME004B051KS 2” 51 60 60 4 102 1.273 40
ME003B057KS 2 1/4” 57 66 50 3.3
ME003B060KS 2 3/8” 60 69 50 3.3 120 1.486 40
ME003B063KS 2 ½” 63 72 50 3.3 126 1.530 40
ME003B076KS 3” 76 85 50 3.3 152 1.808 40
ME002B090KS 3 ½” 90 99 30 2 180 1.930 40
ME002B102KS 4” 102 111 30 2 204 2.917 40
ME002B127KS 5” 127 137 30 2 254 3.613 40
ME002B152KS 6 152 163 30 2 304 4.683 40
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
MF005B025KI 1” 25 35 73 5 152 0.711 40
MF005B032KI 1 ¼” 32 42 73 5 192 0.990 40
MF005B038KI 1 ½” 38 48 73 5 228 1.151 40
MF005B051KI 2” 51 63 73 5 305 1.840 40
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
MS003W019K ¾” 19 29 45 3 114 0.515 40
MS003W025K 1” 25 36 45 3 150 0.681 40
MS003W038K 1 ½” 38 48 45 3 228 0.993 40
MARINE
Email: [email protected] Tel: 01902 606010
SPECIFICATIONSpecificationSAEJ20R3
Application For conveyance of hot water predominantly in vehicles
TubeBlack, heat resistant EPDM rubber
ReinforcementSynthetic textile
Cover Black, heat , ozone and weather resistant EPDM
Temperature Range -40ºc to +120ºc
Safety Factor3:1
BrandingW=Car heater SAEJ20R3 (ID)Qtr/Yr
SPECIFICATION
SpecificationSAEJ30R6
Application For conveyance of leaded or unleaded fuel
TubeBlack, NBR
ReinforcementHigh tensile, synteticfibres
Cover Black, NBR high resistance to weather, heat and fuel
Temperature Range -20ºc to +80ºc
Safety Factor3:1
BrandingW=Fuel hose SAEJ20R6 suitable for unleaded. ID. Qtr/yr
AUTOMOTIVE SECTION 7
Car Heater Hose
Unleaded Fuel Hose
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
CH010B010MS 3/8” 10 17 145 10 100 0.210 100
CH010B013MS ½” 13 20 145 10 130 0.260 20/100
CH010B016MS 5/8” 16 23 145 10 160 0.310 20/100
CH010B019MS ¾” 19 28 145 10 190 0.475 20/100
CH010B025NS 1” 25 34 145 10 210 0.750 60
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
UF020B005MS 3/16” 5 12 300 20 60 0.120 10/100
UF020B006MS ¼” 6 13 300 20 75 0.135 10/100
UF020B008MS 5/16” 8 15 300 20 95 0.160 10/100
UF020B010MS 3/8” 10 17 300 20 120 0.190 10/100
UF020B013MS ½” 13 21 300 20 150 0.275 100
UF020B022LS 7/8” 22 33 300 20 190 0.380 50
MARINE
PVC Sanitation Hose
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
PA005W019J ¾” 19 25.6 130 9 76 0.280 30
PA005W025J 1” 25 32 116 8 102 0.390 30
PA005W038J 1 ½” 38 46 95 6.5 152 0.560 30
Email: [email protected] Tel: 01902 606010 22 23
SPECIFICATION
Application Transportation of waste & other liquids within the Marine industry
TubeSmooth, odour resistant PVC
ReinforcementCrush resistant white PVC helix
Cover White, permeation resistant flexible PVC
Temperature Range -15ºc to +65ºc
Safety Factor3:1
2524
SpecificationBSAU110a/A SAEJ1402/A
Application For use on automotive air brake applications
TubeBlack, heat, oil and mist resistant NBR
ReinforcementHigh tensile, synteticfibres
SpecificationDIN74310
Application For use on automotive air brake applications
TubeBlack, heat, oil, mist and resistant EPDM
ReinforcementHigh tensile, synteticfibres
Cover Black, heat, oil and weather resistant NBR/PVC
Temperature Range -40ºc to +95ºc (peaks up to 115ºc) Safety Factor3:1
BrandingW=BSAU 110a/A SAEJ1402/A Size Airbrake. Qtr/Yr
Cover Black, heat, oil and weather resistant EPDM
Temperature Range -25ºc to +80ºc
Safety Factor2.5:1
BrandingW=DIN74310 Size Airbrake. Qtr/Yr
SPECIFICATION
SPECIFICATION
AUTOMOTIVE
Air Brake Hose (BSAU110a/A/SAEJ1402A)
Air Brake Hose (DIN74310)
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
BB020B010MB 3/8” 10 19 300 20 89 0.265 18.3/100
BB020B013MB ½” 13 22 300 20 102 0.345 18.3/100
BB020B016MB 5/8” 16 27 300 20 114 0.485 100
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
BB020B013MD ½” 13 25 145 10 102 0.425 20/100
Email: [email protected] Tel: 01902 606010
AUTOMOTIVESPECIFICATIONSpecificationSAEJ30R9
Application For fuel injection systems
TubeBlack, NBR/SBR high resistance to fuel/ heat
ReinforcementHigh tensile, syntheticfibres
Cover Black, NBR/SBR high resistance to weather heat, ozone and fuel
Temperature Range -20ºc to +150ºc
Safety Factor4:1
BrandingW=SAEJ30R9 ID. In mm Qtr/Yr
SPECIFICATION
SpecificationDIN 73379 TYPE B
Application Fuel hose for automotive use. Suitable for unleaded fuel
TubeBlack, NBR oil and fuel resistant
ReinforcementSingle textile braid
Cover Black, extrusion braided surface
Temperature Range -20ºc to +70ºc
Safety Factor3:1
BrandingW=DIN 73379 TYPE B ID./OD
Fuel Injection Hose
Cotton Overbraid Fuel Hose
PART NO I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
FI020B4.8MS 4.8 11.6 225 15 60 0.135 100
FI020B5.6MS 5.6 12.6 225 15 70 0.150 100
F1020B7.6MS 7.6 14.6 225 15 90 0.180 100
F1020B9.5MS 9.5 16.5 225 15 110 0.210 100
PART NO I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
FB010B3.2HD 3.2 7.0 145 10 - 0.038 5/20
FB010B3.5HD 3.5 7.5 145 10 - 0.045 5/20
FB010B102HD 4.0 9.0 145 10 - 0.063 20
FB010B4.5HD 4.5 9.5 145 10 - 0.072 20
FB010B5.0HD 5.0 10.0 145 10 - 0.076 5/20
FB010B5.5HD 5.5 10.5 145 10 - 0.081 20
FB010B6.0HD 6.0 11.0 145 10 - 0.090 5/20
FB010B7.0HD 7.0 12.0 145 10 - 0.095 20
FB010B7.5HD 7.5 12.5 145 10 - 0.101 20
FB01B008HD 8.0 13.0 145 10 - 0.106 5/20
FB010B009HD 9.0 14.0 145 10 - 0.117 20
FB010B010HD 10.0 15.0 145 10 - 0.132 20
FB010B012HD 12.0 18.0 145 10 - 0.150 20
2726
Application Vehicle radiator hose
TubeBlack, heat resistant EPDM rubber
ReinforcementSingle textile
Cover Black, heat, weather and ozone resistant EPDM
Temperature Range -40ºc to +120ºc
Safety Factor3:1
SPECIFICATION
AUTOMOTIVE
Radiator Hose
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
RF003B022A 7/8” 22 30 45 3 220 0.493 1/40
RF003B025A 1” 25 34 45 3 254 0.568 1
RF003B028A 1 1/8” 28 36 45 3 280 0.574 1/40
RR003B030A 1 3/16” 30 38 45 3 300 0.653 1
RR003B032A 1 ¼” 32 41 45 3 320 0.775 1/40
RR003B035A 1 3/8” 35 45 45 3 350 0.902 1
RR003B038A 1 ½” 38 47 45 3 380 0.920 1/40
RR003B040A 1 9/16” 40 49 45 3 400 0.945 1
RR003B042A 1 5/8” 42 52 45 3 420 1.105 1
RR003B045A 1 ¾” 45 55 45 3 450 1.164 1
RR003B048A 1 7/8” 48 58 45 3 480 1.246 1
RR003B051A 2” 51 61 45 3 508 1.312 1
RR003B054A 2 1/8” 54 63 45 3 525 1.420 1
RR003B054A 2 ¼” 57 67 45 3 570 1.457 1
RR003B060A 2 3/8” 60 70 45 3 600 1.527 1
RR003B063A 2 ½” 63 73 45 3 635 1.576 1
RR003B070A 2 ¾” 70 80 45 3 700 1.765 1
RR003B076A 3” 76 86 45 3 762 1.868 1
RR003B090A 3 ½” 90 100 45 3 900 2.092 1
RR003B102A 4” 102 112 45 3 1016 2.552 1
RR003B125A 5” 125 137 45 3 - - 1
AUTOMOTIVE
Email: [email protected] Tel: 01902 606010
Application Flexible vehicle radiator hose
TubeBlack, heat resistant EPDM rubber
ReinforcementSynthetic textile fabrics with steel wire helix
Cover Black, heat, weather and ozone resistant EPDM rubber (ribbed)
Temperature Range -40ºc to +120ºc
Safety Factor3:1
Super Flexible Radiator Hose
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
RF003B022A 7/8” 22 30 145 10 88 0.62 1/40
RF010B025A 1” 25 34 145 10 102 0.65 1/40
RF010B028A 1 1/8” 28 36 145 10 112 0.75 1/40
RF010B032A 1 ¼” 32 41 145 10 128 0.91 1/40
RF010B035A 1 3/8” 35 45 145 10 140 1.00 1/40
RF010B038A 1 ½” 38 47 145 10 152 1.06 1/40
RF010B045A 1 ¾” 45 55 145 10 180 1.31 1/40
RF010B051A 2” 51 61 145 10 203 1.62 1/40
2928
SpecificationISO3821
Application For oxygen
TubeBlack SBR/NR
ReinforcementSyntetic textile
SpecificationISO3821
Application For acetylene
TubeBlack SBR/NR
ReinforcementSyntetic textile
Cover NR/EPDM blue, weather and flame resistant
Temperature Range -20ºc to +90ºc
Safety Factor3:1
BrandingW=ISO3821 (20 bar) ID. Qtr/Yr
Cover NR/EPDM red, weather and flame resistant
Temperature Range -20ºc to +90ºc
Safety Factor3:1
BrandingW=ISO3821 (20 bar) ID. Qtr/Yr
SPECIFICATION
SPECIFICATION
Welding Hose (Oxygen)
Welding Hose (Acetylene)
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
GL020L006M ¼” 6 13 300 20 60 0.157 100
GL020L008M 5/16” 8 15 300 20 80 0.191 100
GL020L010M 3/8” 10 17 300 20 100 0.225 100
GL020L013M ½” 13 21 300 20 130 0.325 100
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
GL020R006M ¼” 6 13 300 20 60 0.157 100
GL020R008M 5/16” 8 15 300 20 80 0.191 100
GL020R010M 3/8” 10 17 300 20 100 0.225 100
GL020R013M ½” 13 21 300 20 130 0.325 100
Email: [email protected] Tel: 01902 606010
GAS & WELDING SECTION 8 GAS & WELDING
SpecificationISO3821
Application For LPG
TubeBlack NBR
ReinforcementSyntetic textile
Cover NR/EPDM orange, weather and flame resistant
Temperature Range -20ºc to +80ºc
Safety Factor3:1
BrandingW=ISO3821 (20 bar) ID. Qtr/Yr
SPECIFICATION
Orange Cover Hose (LPG)
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
GL020A005M 3/16” 5 12 300 20 60 0.115 100
GL020A006M ¼” 6 14 300 20 60 0.128 100
GL020A008M 5/16” 8 16 300 20 80 0.191 100
GL020A010M 3/8” 10 18 300 20 100 0.226 100
GL020A013M ½” 13 22 300 20 130 0.277 100
3130
PVCPVC SECTION 9
SPECIFICATION SPECIFICATIONApplication Medium duty, suction and delivery of slurry, water etc
TubeStrong, flexible and smooth plasticised PVC
ReinforcementShock resistant PVC spiral
Cover Strong, flexible and smooth plasticised PVC
Temperature Range -5ºc to +60ºc
Safety Factor3:1
SPECIFICATION
Application Submersible water pumps vacuum, ducting
TubeStrong, smooth Plasticised PVC
ReinforcementShock resistant PVC spiral
Cover Strong, flexible and smooth plasticised PVC
Temperature Range -5ºc to + 60ºc
Safety Factor3:1
Medium Duty Green, Suction & Delivery
Superflex Green Tint water delivery
PART NO NOM INCHES I.D MM O.D MM
Vacumm MH20
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
PM009G019J ¾” 19 25 9 135 9 130 0.240 30
PM009G025J 1” 25 30 9 135 9 140 0.300 30
PM008G032J 1 ¼” 32 37 9 120 8 150 0.390 30
PM008G038J 1 ½” 38 45 9 120 8 180 0.520 30
PM007G051J 2” 51 59 9 105 7 220 0.800 30
PM007G063J 2 ½” 63 70 9 105 7 280 1.040 30
PM006G076J 3” 76 85 9 90 6 320 1.380 30
PM005G102J 4” 102 113 8 75 5 400 2.220 30
PM004G127J 5” 127 142 7 60 4 600 3.00 30
PM003G152J 6” 152 167 7 45 3 800 4.00 30
PART NO NOM INCHES I.D MM O.D MM
Vacumm MH20
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
PS008G019J ¾” 19 24 7 120 8 85 0.180 30
PS008G025J 1” 25 30 6 120 8 105 0.220 30
PS007G032J 1 ¼” 32 38 6 105 7 125 0.360 30
PS006G038J 1 ½” 38 44 6 90 6 150 0.440 30
PS006G051J 2” 51 58 6 90 6 205 0.730 30
PS004G063J 2 ½” 63 74 5 60 4 300 1.200 30
PS004G076J 3” 76 83 5 60 4 320 1.300 30
Email: [email protected] Tel: 01902 606010
Application Suction and delivery of water, slurries and dilute chemicals
TubeTranslucent clear PVC
ReinforcementHelical steel wire
Cover Translucent clear PVC
Temperature Range -20ºc to +65ºc
Safety Factor3:1
SPECIFICATION
Application Suction and delivery of oils
TubeBlue oil resistant PVC/Nitrile
ReinforcementShock resistant PVC spiral
Cover Blue oil resistant PVC/Nitrile
Temperature Range -10ºc to +60ºc
Safety Factor3:1
PVC Transparent, Suction & Delivery Steel spiral (non toxic)
Blue Medium Duty Suction & delivery for Oils
PART NO NOM INCHES I.D MM O.D MM
Vacumm MH20
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
PN005C013J ½” 13 19 9 150 10 2XDI 0.220 30
PN005C019J ¾” 19 26 9 135 9 2XDI 0.360 30
PN005C025J 1” 25 33 9 120 8 2XDI 0.480 30
PN005C032J 1 ¼” 32 41 9 112 7.5 2.5XDI 0.780 30
PN005C038J 1 ½” 38 48 9 112 7.5 2.5XDI 1.050 30
PN005C051J 2” 51 62 9 90 6 2.5XDI 1.600 30
PN005C063J 2 ½” 63 80 9 67 4.5 2.5XDI 2.800 30
PN005C076J 3” 76 92 9 60 4 3XDI 3.500 30
PART NO NOM INCHES I.D MM O.D MM
Vacumm MH20
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
PM009L020JU ¾” 19 25 9 135 9 95 0.310 30
PM009L025JU 1” 25 32 9 135 9 110 0.410 30
PM008L032JU 1 1/4” 32 41 9 120 8 150 0.600 30
PM008L038JU 1 ½” 38 46 9 120 8 195 0.700 30
PM007L051JU 2” 51 60 9 105 7 275 1.000 30
PM006L076JU 3” 76 86 9 90 6 355 1.700 30
PM005L102J 4” 102 116 8 75 5 475 2.700 30
3332
PVC SPECIFICATION
Email: [email protected] Tel: 01902 606010
Application Suction and delivery of water, fruit juices, alimentary liquids
TubeSmooth non toxic plasticised pvc
ReinforcementShock resistant PVC spiral
Cover smooth non toxic plasticised PVC
Temperature Range -5ºc to +60ºc
Safety Factor3:1
Clear with White Spiral Non Toxic Suction & Delivery
Heavy Duty Clear Braided PVC Hose
PART NO NOM INCHES I.D MM O.D MM
Vacumm MH20
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
PN005C019J ¾” 19 25 7 75 5 90 0.280 30
PN005C025J 1” 25 31 6 75 5 105 0.300 30
PN005C032J 1 ¼” 32 38 6 75 5 125 0.390 30
PN005C038J 1 ½” 38 45 6 75 5 155 0.520 30
PN005C051J 2” 51 59 6 75 5 210 0.800 30
PN005C063J 2 ½” 63 73 6 75 5 275 1.040 30
PN005C076J 3” 76 84 6 75 5 330 1.380 30
PN004C102J 4” 102 114 6 60 4 450 2.220 30
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
PB024C005JT 3/16” 5 11 350 24 - 0.102 30
PB020C006JT ¼” 6 11.5 300 20 - 0.102 30
PB02C008JT 5/16” 8 13.5 300 20 - 0.126 30
PB020C010JT 3/8” 10 16 300 20 - 0.166 30
PB020C013JT ½” 13 19 300 20 - 0.204 30
PB016C016JT 5/8” 16 23 230 16 - 0.290 30
PB016C019JT ¾” 19 26 230 16 - 0.334 30
PB012C025JT 1” 25 33 170 12 - 0.492 30
PB008C032JT 1 ¼” 32 42 120 8 - 0.785 30
PB006C038J 1 ½” 38 48 90 6 - 0.912 30
PB005C051J 2” 51 60 65 4.5 - 0.143 30
SPECIFICATION
Application General workshop use
TubeTransparent PVC
ReinforcementSynthetic textile
Cover Abrasion, weather and ozone resistant transparent PVC
Temperature Range -10ºc to + 60ºc
Safety Factor3:1
PVC
Application For discharge of water etc. Suitable for water
TubeBlue PVC
ReinforcementPolyester reinforcement
Cover Blue PVC
Temperature Range -10ºc to +60ºc
Safety Factor3:1
SPECIFICATION
SPECIFICATION
Application Irrigation & delivery of water. Also suitable for water pumps.
TubeBlack PVC
ReinforcementPolyester reinforcement
Cover Yellow PVC
Temperature Range -10ºc to +60ºc
Safety Factor3:1
Medium Duty Blue Layflat
Heavy Duty Yellow Layflat
PART NO NOM INCHES I.D MMWorking Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
PL003L025M 1” 25 45 3 N/A 0.150 100
PL003L032M 1 ¼” 32 45 3 N/A 0.170 100
PL003L038M 1 ½” 38 45 3 N/A 0.190 100
PL003L052M 2” 52 45 3 N/A 0.220 100
PL003L063M 2 ½” 63 45 3 N/A 0.300 100
PL003L076M 3” 76 45 3 N/A 0.350 100
PL003L102M 4” 102 45 3 N/A 0.530 100
PL003L153M 6” 153 45 3 N/A 0.900 100
PL003L203M 8” 203 45 3 N/A 1.550 100
PART NO NOM INCHES I.D MMWorking Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
PL006Y025M 1” 25 115 8 N/A 0.150 100
PL006Y032M 1 ¼” 32 100 7 N/A 0.170 100
PL006Y038M 1 ½” 38 100 7 N/A 0.190 100
PL006Y051M 2” 52 85 6 N/A 0.220 100
PL006Y076M 3” 76 85 6 N/A 0.350 100
PL006Y102M 4” 102 85 6 N/A 0.600 100
PL006Y152M 6” 153 60 4 N/A 1.200 100
35
SPECIFICATIONApplication Suitable for transfer of up to 90% of chemicals
TubeUHMWPE, black, smooth
ReinforcementTextile cord, steel helix
Cover Green, weather, ozone and chemical Resistant EPDM rubber
Temperature Range -30ºc to +80ºc
Safety Factor3:1
BrandingW=10 bar chemical Suction & deliveryHose. Qtr/Yr
CHEMICAL SECTION 10
UHMWPE Chemical Hose
PART NO NOM INCHES I.D MM O.D MM
Working Pressure
PSI BAR
Bend Radius MM Weight KG/M Coil Lengths
CM010G013K ½” 13 25 150 10 91 0.550 40
CM010G019K ¾” 19 31 150 10 133 0.600 40
CM010G025K 1” 25 34 150 10 175 0.800 40
CM010G032K 1 ¼” 32 45 150 10 224 1.000 40
CM010G038K 1 ½” 38 51 150 10 226 1.200 40
CM010G051K 2” 51 65 150 10 357 2.900 40
Email: [email protected] Tel: 01902 606010 34
Terms and conditions of saleIn these conditions the following words have the following meanings:
The “Buyer” means the person(s), firm or company who purchases the Goods from the Company;
The “Company” means Winster Limited;
“Contract” means any contract between the Company and the Buyer for the sale and purchase of the Goods, incorporating these conditions;
“Goods” means any Goods agreed in the Contract to be supplied to the Buyer by the Company (including any part or parts of them).
1 Validity
1.1 Unless otherwise specifically agreed in writing by the Company all sales of Goods made by the Company are subject to these terms and conditions. No other agreement, representation, promise, undertaking, or understanding of any kind shall, unless expressly made or accepted by the Company in writing, form part of, vary, or operate as a waiver of these terms and conditions or any part of them.
1.2 These terms and conditions shall prevail over and take the place of any other terms and conditions contained in any purchase order or any other document or, or communication from the Buyer.
2 Formation of Contract
2.1 Each order for Goods by the Buyer from the Company shall be deemed to be an offer by the Buyer to Purchase Goods subject to these conditions.
2.2 A Contract shall be made when the Company sends out its confirmation in writing of the Buyer’s order. Quotations are for information only.
3 Price
3.1 All prices quoted by the Company take into account these conditions and reflect the limitations upon the Company’s liability which they contain.
3.2 In the event of the Buyer wishing to contract with the Company otherwise than on the Basis of these conditions special arrangements can be made and revised price quoted by the Company.
3.3 Unless otherwise agreed by the Company in writing the price for the Goods shall be the price agreed on acceptance of a Contract by the Company.
3.4 The price for the Goods shall be exclusive of any value added tax and, unless otherwise stated, all costs or charges in relation to loading, unloading and carriage all of which amounts the Buyer will pay in addition when it is due to pay for the Goods.
4 Despatch and Delivery
4.1 The Company will endeavour to adhere to any stated despatch or delivery date, but any such date is a business estimate only and the Buyer agrees that the Company shall have no liability for any loss or damage whatever and however caused resulting from any delay.
4.2 The risk in the Goods shall pass to the Buyer upon delivery to the carriers for transport to the Buyer, or where carriage is effected by the Company upon despatch of the Goods, and the Company shall not have any liability whatever for any loss or damage or deterioration to the Goods caused arising either during transit or at any other time after the risk has passed to the Buyer and the Buyer should therefore be insured accordingly.
4.3 The Company may, at its absolute discretion, postpone delivery of the Goods at the request of the Buyer in which case the Buyer shall make payment as if the Goods were delivered and invoiced on the date of such request. The Company may store the Goods at its own premised or elsewhere at the Buyer’s sole risk and all storage, insurance
5 Retention of Title
5.1 Ownership of the Goods shall not pass to the Buyer until the Company has received in full (in cash or cleared funds) all sums due to it in respect of:
5.1.1 the Goods; and
5.1.2 all other sums which are or which become due to the Company from the Buyer on any account.
5.2 Until ownership of the Goods has passed to the Buyer, the Buyer must:
5.2.1 hold the Goods on a fiduciary basis as the Company’s bailee;
5.2.2 store the Goods (at no cost to the Company) separately from all other goods of the Buyer or any third party in such a way that they remain readily identifiable as the Company’s property;
5.2.3 not destroy, deface or obscure any identifying mark or packaging on or relating to the Goods;
5.2.4 ensure at all times the Goods are insured to the reasonable satisfaction of the Company. On request the Buyer shall produce the policy of insurance to the Company; and
5.2.5 hold the proceeds of the insurance referred to in condition 5.2.4 on trust for the Company and not mix them with any other money, nor pay the proceeds into an overdrawn bank account.
5.3 The Buyer may resell the Goods before ownership has passed on to it solely on the following conditions:
5.3.1 any sale shall be effected in the ordinary course of the Buyer’s business at full market value; and
5.3.2 any such sale shall be a sale of the Company’s property on the Buyer’s own behalf and the Buyer shall deal as principal when making such a sale.
5.4 The Buyer’s right to possession of the Goods shall terminate immediately if:
5.4.1 any of the termination events detailed in clause 12 occurs; or
5.4.2 the Buyer encumbers or in any way charges any of the Goods.
5.5 The Company shall be entitled to recover payment for the Goods notwithstanding that ownership of any of the Goods has not passed from the Company.
5.6 The Buyer grants the Company, its agents and employees an irrevocable licence at any time to enter any premises where the Goods are or may be stored in order to inspect them, or, where the Buyer’s right to possession has terminated, to recover them.
6 Payment
6.1 Unless otherwise expressly stated, payment for the Goods shall be made not later than 30 days from the date of the invoice.
6.2 Time for payment shall be of the essence.
6.3 No payment shall be deemed to have been received until the Company has received cleared funds.
6.4 All payments payable to the Company under a Contract shall become due immediately upon termination of such contract despite any other provision.
6.5 The Buyer shall make all payments due under the Contract without any deduction whether by way of set-off, counterclaim, discount, abatement or otherwise unless the Buyer has a valid court order requiring an amount equal to such deduction to be paid by the Company to the Buyer.
6.6 If the Buyer fails to pay the Company any sum due pursuant to the Contract the Buyer will be liable to pay interest to the Company on such sum from the due date for payment at the annual rate of 5% above the base lending rate from time to time of National Westminster Bank plc, accruing on a daily basis until payment is made, whether before or after any judgement. The Company reserves the right to claim interest under the Late Payment of Commercial Debts (Interest) Act 1998.
6.7 The Company shall have the right to suspend any further deliveries under the Contract or any other Contract until payment is made or to cancel the Contract or any other Contract until payment is made or to cancel the Contract in relation to such further deliveries provided that no time or indulgence granted by the Company shall prejudice any right or remedy of the Company.
7 Company’s Warranty
7.1 Subject to the remainder of this clause and clause 8, the Company hereby warrants that the Goods are free from any material defect in workmanship and materials and correspond with any agreed written specification. The Company does not warrant that the Goods are fit for any particular purpose of, or intended use by, the Buyer and it is for the Buyer to satisfy itself that the Goods are so fit. The Company’s liabilities under this warranty shall be limited to:
7.1.1 making available free of charge the labour and materials required to make good any such defects; or
7.1.2 at the Company’s option replacing any defective Goods (or the defective part) or refunding the price of such Goods at the pro rata Contract rate provided that, if the Company so requests, the Buyer shall, at the Buyer’s expense, return the Goods or the part of such Goods which are defective to the Company.
7.2 The Company’s liability under the warranty in clause 7.1 is also conditional upon:
7.2.1 written notice of the defect or allegation that the Goods delivered are not in accordance with any particular specification, which defect should be apparent on reasonable inspection of the packaging and labelling of the Goods, being given to the Company within 7 days of arrival of the Goods at the Buyer’s premises;
7.2.2 where the defect is not apparent until the Goods are used by the Buyer, within 7 days of the defect or alleged defect being apparent;
7.2.3 the Buyer not making any further use of such Goods after giving such notice;
7.2.4 the Buyer affording the Company reasonable opportunity (within 21 days of such notice) itself or by its representatives to examine the Goods;
7.2.5 the Goods having been properly stored and used by the Buyer prior to the defect occurring;
7.2.6 that the Goods not having been fitted incorrectly or subject to any incorrect, abnormal or improper load, use, accident or unauthorised modification repair or application, whether by the Buyer or any third party;
7.2.7 the Goods having been subjected to proper and adequate inspection after installation and use and properly maintained in accordance with the Company’s guidelines; and
7.2.8 the Company having received the total price for the Goods by the due date for payment.
7.3 The Company’s liability in respect of the Goods shall in any event be limited to a period of 12 months from the date of delivery of the Goods.
7.4 Any Goods replaced will belong to the Company and any repaired or replacement Goods will be guaranteed on these terms for the unexpired portion of the 12 month period.
7.5 This warranty does not extend to parts, materials or equipment not manufactured by the Company, in respect of which the Buyer shall only be entitled to the benefit of any such warranty or guarantee as is given by the manufacturer to the Company and the Buyer’s only remedy shall be against the manufacturer for defects or fault attributable to such parts, materials or equipment. The warranty does not extend to cosmetic defects occurring after supply or to samples or Goods sold as sub-standard by the Company.
7.6 In the case of Goods exported by the Buyer, it is the Buyer’s responsibility to ensure that the Goods comply with any legislation or regulations relating to their use in the country in question and the Company shall not therefore incur any liability whatever in respect thereof.
7.7 The Company shall not be liable in respect of any defect arising from fair wear and tear, wilful damage or arising from any drawing, design or specification supplied by the Buyer.
7.8 If some only of the Goods are defective the Buyer shall accept the remainder of the Goods and the Buyer shall be liable to make payment of the Contract price in proportion to the quantity of Goods accepted.
7.9 The Buyer shall be responsible for determining whether the Goods are fit for the purpose for which the Buyer purchases the Goods. Further, the Buyer shall satisfy itself a) as to the suitability of the Goods to carry or contain specific substances (whether organic or inorganic) without causing deterioration or damage to the Goods and b) as to the period of time that such substances can be stored within the Goods, and the Company shall accept no liability for any loss or contamination of such substances whatever however arising.
8 Exclusion of Liability
8.1 Nothing in these conditions excludes or limits the liability of the Company for death or personal injury caused by the Company’s negligence.
THE BUYER’S ATTENTION IS IN PARTICULAR DRAWN TO THE PROVISIONS OF CONDITION 8.2
8.2 Subject to clause 7 and clause 8.1:
8.2.1 the Company shall not be liable to the Buyer by reason of any representation (unless fraudulent), or any implied warranty, condition or other term, or any duty at common law, or under the express terms of any agreement, for loss of profit or for any indirect, special or consequential loss or damage, costs, expenses or other claims for compensation whatever (whether caused by the Company’s negligence or that of its employees, agents or subcontractors or otherwise) which arise out of or in connection with the supply of the Goods (including any delay in supplying or any failure to supply the Goods in accordance with any agreement or at all) or their use or resale by the Buyer; and
8.2.2 the entire liability of the Company in contract, tort (including negligence or breach of statutory duty), misrepresentation (unless fraudulent) or otherwise arising in connection with the supply of the Goods under the Contract or resulting from their use shall not exceed the lower of:
a) £500.00 per claim, or series of claims arising from one occurrence, where the Company’s liability for the loss or damage is covered by the Company’s insurance cover. If for any reason (other than the Company’s failure to pay the insurance premium where insurance is reasonably available) the loss or damage is not covered by the Company’s insurance cover then, the entire liability of the Company in accordance with this sub-clause shall not exceed £500.00; or
b) the value paid or payable by the Buyer under a Contract.
8.2.3 A claim in respect of any defect, failure to comply with any agreed written specification, non-delivery of any order or any part of the order shall not entitle the Buyer to cancel a Contract or refuse delivery of or payment for the Goods or any other order.
8.2.4 The Buyer shall be liable for any loss, damage or injury caused by faulty installation of the Goods or by faulty loading or packing within any form of container whether such packing or loading has been performed by the Buyer or on its behalf.
8.2.5 If any of these terms and conditions or any part of any of them is rendered void by any legislation to which it is subject, it shall be void to that extent and no further. If any of these terms and conditions or any part of any one of them is rendered unenforceable by legislation to which it is subject, it shall be unenforceable to the extent that it is shown by the Buyer that it would not be fair or reasonable to allow reliance on it and no further.
9 Indemnity
9.1 The Buyer shall indemnify and hold the Company harmless against all claims relating to the Goods, in respect of any loss, damage or expense, whether direct or consequential, sustained by any third party save only in respect of death or personal injury caused by the negligence of the Company or any of its employees, sub-contractors of agents.
10 Artwork
10.1 All blocks, stereos, sketches and other original work produced by the Company in connection with the Buyer’s order shall remain the property of the Company.
11 Quality Variation
11.1 A shortage or surplus, charged pro-rata, not exceeding 10 per cent will be considered due execution of any order.
12 Force Majeure
12.1 In the event of any delay or interruption of works at the Company’s works or of any strike, lockout, trade dispute, fire, explosion, flood accident to or breakdown of any plant or machinery, stoppage of any material, labour or transport or any other cause whatsoever beyond the Company’s control adversely affecting or delaying the Company’s performance of any of its obligations under the Contract, the Company shall be entitled without liability to suspend delivery wholly or in part or to extend the time for delivery or, if performance of the Contract becomes impossible or commercially unreasonable, to terminate the Contract.
13 Termination
13.1 If the Buyer:
13.1.1 has a bankruptcy order made against him or makes an arrangement or composition with his creditors, or otherwise takes the benefit of any Act for the time being in force for the relief of insolvent debtors, or being a body corporate) convenes a meeting of creditors (whether formal or informal), or enters into liquidation (whether voluntary or compulsory) except a solvent voluntary liquidation for the purpose only of reconstruction or amalgamation or has a receiver and/or manager administrator or administrative receiver appointed of its undertaking or any part thereof, or a resolution is passed or a petition presented to any court for the winding up of the Buyer or for the granting of an administration order in respect of the Buyer, or any proceedings are commenced relating to the insolvency or possible insolvency of the Buyer; or
13.1.2 the Buyer suffers or allows any execution, whether legal or equitable, to be levied on his/its property or obtained against him/its property or obtained against him/it, or fails to observe/perform any of his/its obligations under the Contact or any other contract between the Company and the Buyer, or is unable to pay its debts within the meaning of section 123 of the Insolvency Act 1986 or the Buyer ceases to trade the Company shall have the right forthwith to terminate any order then subsisting upon written notice of such determination being posted to the Buyer’s last known address any subsisting order shall be deemed to have been determined without prejudice to any claim or right the Company might otherwise make or exercise.
14 Headings
14.1 The headings to these terms and conditions are intended for convenience only and shall in no way affect their construction.
15 Third Party Rights
15.1 The parties to this Contract do not intend that any term of this Contract will be enforceable by virtue of the Contracts (Rights of Third Parties) Act 1999 by any person that is not a party to it.
16 Communications
16.1 All communications between the parties about this Contract must be in writing and delivered by hand or sent by pre-paid first class post or sent by facsimile transmission:
16.1.1 (in case of communications to the Company) to its registered office or such changed address as shall be notified to the Buyer by the Company; or
16.1.2 (in the case of communications to the Buyer) to the registered office of the addressee (if it is a company) or (in any other case) to any address of the Buyer set out in any document which forms part of this Contract or such other address as shall be notified to the Company by the Buyer.
16.2 Communications shall be deemed to have been received:
16.2.1 if sent by pre-paid first class post, 2 days (excluding Saturdays, Sundays and bank and public holidays) after posting (exclusive of the day of posting);
16.2.2 if delivered by hand, on the day of delivery;
16.2.3 if sent by facsimile transmission on a working day prior to 4:00pm, at the time of transmission and otherwise on the next working day.
17 Governing Law
17.1 These terms and conditions shall be governed by and construed in accordance with English Law, and by entering into a Contract with the Seller the Buyer agrees irrevocably to submit any disputes arising out of such Contract to the exclusive jurisdiction of the English Courts.
37Email: [email protected] Tel: 01902 606010
36
38
Other specialist hoses available• Suction excavator hose
• Jetting tanker boom hose
• Sewer jetting hose
• Material handling hose
• Paint spray hose
Please contact our sales team for further information.
www.winster-hose.co.uk Tel: 01902 606010