NOBIL WELDER TECHNICAL DATADimensions W 390 x H 400 x D 550 mmWeight 25 KgPulse duration 3 – 99 msVoltage 230 V~Frequency 50Hz Power consumption Max 1000 W
NOBIL WELDER TECHNICAL DATA
Strada S. Rocco, 28 - 14018 Villafranca d’Asti - ITALIA - Tel. +39 0141 933811 - Fax +39 0141 [email protected] - [email protected] - http://www.nobilmetal.com
Laser Weld: alloy in wires and strips specifically studied to be used with plasma or laser welder
Welding gets easy and safe
a world of difference
Mic
ro-p
uls
e p
lasm
a w
eld
er
astig
rafi c
a re
v. 0
7/08
???
????
????
????
??
USEUSE
ADVANTAGES• 16 Programmes
• Regulations: pulse power - pulse duration - Argon gas fl ow
• Electromechanical protection of the eyes
• Stable and contamination-free welding due to the Argon gas in the chamber
• 2 tungsten electrodes of different diameter: Ø 0,5 mm - Ø 1 mm
• No contact of the electrode with the part to be welded
• Welding in inaccessible areas too, thanks to the new electrode with ceramics sheath
• Fast interchangeability and adjustment of the electrode angle
• Excellent lighting of the working chamber
• Possibility of additional fume extractor
• Single and continuous pulses by the foot switch
ADVANTAGESMicro-pulse
plasma welder
Welding gets easy and safe
Fixed prothesis
Implantology
Repairs
Orthodontics
Post soldering
Combined prothesis
Partial prothesis
The advantages of welding instead of brazing:
• Excellent precision
• Welding on the master or position model is possible even
• Saving of about 80% time, especially in case of work on fi nal structures
• High temperature only on the welding point
• A high modulus of elasticity and stability are kept
• High biocompatibility of the welding with alloys of the same type (using Laser Weld solder range)