Transcript
Page 1: NTC Thermistors Catalog

NTC Thermistors

Page 2: NTC Thermistors Catalog

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

EU RoHS Compliant

For r o ur 'Mur A ro c o '

Page 3: NTC Thermistors Catalog

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Contents

Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.

Temperature Sensor Thermo String Type p25

Temperature Sensor Thermo String Type Specifications and Test Methods p26

Part Numbering p2

Basic Characteristics p6

Product specifications are as of December 2014.Temperature Sensor and Compensation 0201 (0603) Size p7

1

Temperature Sensor and Compensation 0402 (1005) Size p8

2

Temperature Sensor and Compensation 0603 (1608) Size p10

3

Temperature Sensor and Compensation 0805 (2012) Size p12

4

5

Temperature Sensor Lead Type p28

Temperature Sensor Lead Type Specifications and Test Methods p29

6

Inrush Current Suppression Lead Type p36

Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) p38

Inrush Current Suppression Lead Type !Caution/Notice p42

Inrush Current Suppression Lead Type Package p44

8

Temperature Sensor Lead Insulation Type (Radial Type) p30

Temperature Sensor Lead Insulation Type (Radial Type) Specifications and Test Methods p31

7

Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions p13

Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) p14

Temperature Sensor and Compensation Chip Type !Caution/Notice p18

Temperature Sensor and Compensation Chip Type Package p22

Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value) p32

Temperature Sensor Thermo String/Lead Type !Caution/Notice p33

Temperature Sensor Thermo String/Lead Type Package p35

1

2

3

4

5

6

7

8

Page 4: NTC Thermistors Catalog

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

2

o Part Numbering

qProduct ID

wSeries

yResistance Tolerance

uIndividual Specifications

NTC Thermistors for Temp. Sensor and Compensation Chip Type

NC NTC Thermistors Chip Type

D

F

E

J

P

±0.5%

±1%

±3%

±5%

03

Individual Specifications

Product ID

Code

Code

Series

Resistance Tolerance

Code

(Part Number)

tResistance

Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures.

Structures and other specifications are expressed by two figures.

102

103

104

Ex.

Ex.

1kΩ

10kΩ

100kΩ

Code Resistance

Standard Type

iPackaging

RA

RB

RC

RL

Plastic Taping 4mm Pitch (4000 pcs.)

Paper Taping 4mm Pitch (4000 pcs.)

Paper Taping 2mm Pitch (10000 pcs.)

Paper Taping 2mm Pitch (15000 pcs.)

Code Packaging

Plated Termination Series

eDimensions (LgW)

03

15

18

21

Code Dimensions (LgW)

0.60g0.30mm

1.00g0.50mm

1.60g0.80mm

2.00g1.25mm

EIA

0201

0402

0603

0805

rTemperature Characteristics

XC

XF

XH

XM

XQ

XV

XW

WB

WD

WF

WL

WM

Code Temperature Characteristics

Nominal B-Constant 3100e3149K

Nominal B-Constant 3250e3299K

Nominal B-Constant 3350e3399K

Nominal B-Constant 3500e3549K

Nominal B-Constant 3650e3699K

Nominal B-Constant 3900e3949K

Nominal B-Constant 3950e3999K

Nominal B-Constant 4050e4099K

Nominal B-Constant 4150e4199K

Nominal B-Constant 4250e4299K

Nominal B-Constant 4450e4499K

Nominal B-Constant 4500e4549K

y

J

e

18

w

P

r

XH

t

103

u

03

i

RBNC

q

Page 5: NTC Thermistors Catalog

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

3

qProduct ID

wIndividual Specifications

uLead Wire Type

iShape of the Lead Wire Kink

NTC Thermistor for Temperature Sensor Thermo String Type

NXF NTC Thermistors Sensor Thermo String TypeA

ø0.3mm Copper Lead Wire with Polyurethane Coat

1

2

Shape of the Lead Wire Kink

Product ID Code Lead Wire Type

Code

(Part Number)

tResistance

Expressed by three figures. The unit is (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures.

103

104

Ex.

10kΩ

100kΩ

Code Resistance

Twisted Lead Wire Type

Standard Type

T Commercial Type

Code

yResistance Tolerance

F ±1%

Code Resistance Tolerance

oPackaging

B Bulk

Code Packaging

!0Dimensions (Full Length)

025

030

040

050

060

070

080

090

100

110

120

130

140

150

25mm

30mm

40mm

50mm

60mm

70mm

80mm

90mm

100mm

110mm

120mm

130mm

140mm

150mm

Code Dimensions (Full Length)

Individual Specifications

rTemperature Characteristics

XH

XV

WB

WF

Nominal B-Constant 3350–3399K

Nominal B-Constant 3900–3949K

Nominal B-Constant 4050–4099K

Nominal B-Constant 4250–4299K

Code Temperature Characteristics

eChip Dimensions

15 1.00 x 0.50mm

Code Dimensions (LxT)

0402

EIA

t

103

w

T

e

15

r

XH

y

F

u

A

i

2

o

B

!0

025NXF

q

Page 6: NTC Thermistors Catalog

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

4

qProduct ID

wIndividual Specifications

uLead Wire Type

iShape of the Lead Wire

NTC Thermistor for Temperature Sensor/Lead Type

NXR NTC Thermistor Sensor/Lead Type A

Lead Type: ø0.4mm Copper-clad Fe Wire, TinnedLead Insulation Type: ø0.46mm Cu Wire with Coat

1

3

5

Shape of the Lead Wire

Product ID Code Lead Wire Type

Code

(Part Number)

tResistance

Expressed by three figures. The unit is (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures.

202

103

104

Ex.

2.0kΩ

10kΩ

100kΩ

Code Resistance

Lead Spacing 2.5mm

Lead Spacing 5.0mm

Lead Spacing 2.5mm (Insulation Type)

T Commercial Type

Code

yResistance Tolerance

F

E

J

±1%

±3%

±5%

Code Resistance Tolerance

oPackaging

A

B

Ammo Pack Taping

Bulk

Code Packaging

!0Dimensions (Full Length)

010

020

025

030

035

040

045

016

10mm

20mm

25mm (Insulation Type only)

30mm

35mm (Insulation Type only)

40mm

45mm (Insulation Type only)

16mm (Taping Type/Lead distance between reference and bottom planes)

Code Dimensions (Full Length)

Individual Specifications

rTemperature Characteristics

XH

XM

XV

WB

WF

Nominal B-Constant 3350–3399K

Nominal B-Constant 3500–3549K

Nominal B-Constant 3900–3949K

Nominal B-Constant 4050–4099K

Nominal B-Constant 4250–4299K

Code Temperature Characteristics

eChip Dimensions

15 1.00 x 0.50mm

Code Dimensions (LxT)

t

103

w

T

e

15

r

XH

y

F

u

A

i

1

o

B

!0

040NXR

q

Page 7: NTC Thermistors Catalog

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

5

y

B0

e

160

r

L

t

BMNT

q w

PA7

qProduct ID

wSeries

rResistance Tolerance

tIndividual Specifications

NTC Thermistors for Inrush Current Suppression Lead Type

NT NTC Thermistors L

PA5

PA6

PA7

PA9

PAA

PAD

PAJ

PAN

±15%

DK

Individual Specifications

Product ID

Code

Code

Series

Resistance Tolerance

Code

(Part Number)

eResistance

Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits.

The lead structure and other specifications are expressed by two-digit alphanumerics.

3R0

100

Ex.

10Ω

Code Resistance

Standard (Bulk)

yPackaging

A0

B0

Ammo Pack Taping

Bulk

Code Packaging

Body Diameter

ø18mm, ø22mm

DN Standard (Bulk) ø10mm, ø13mm

BM Standard Type (Bulk) ø7mm, ø9mm

B1 Standard Type (Ammo Pack) ø7mm, ø9mm

D6 Standard Type (Ammo Pack) ø10mm, ø13mm

Inrush CurrentSuppressionLead Type

ø5mm

ø6mm

ø7mm

ø9mm

ø10mm

ø13mm

ø18mm

ø22mm

Nominal Body Diameter

Page 8: NTC Thermistors Catalog

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

6

1. Zero-power Resistance of Thermistor: R

2. B-Constant

R=R0 expB (1/T-1/T0) ..............(1)R: Resistance in ambient temperature T (K)(K: absolute temperature)R0: Resistance in ambient temperature T0 (K)B: B-Constant of Thermistor

as (1) formulaB=Rn (R/R0) / (1/T-1/T0) ............(2)

3. Thermal Dissipation ConstantWhen electric power P (mW) is spent in ambient temperature T1 and thermistor temperature rises T2, the formula is as followsP=C (T2-T1) ..................(3)C: Thermal dissipation constant (mW/°C)Thermal dissipation constant is varied with dimensions, measurement conditions, etc.

4. Thermal Time ConstantPeriod in which the thermistor's temperature will change 63.2% of its temperature difference from ambient temperature T0 (°C) to T1 (°C).

Resistance vs. Temperature

!Basic Characteristics

!Performance

Thermal Time Constant

Item

Resistance

Condition

Measured by zero-power in specified ambient temperature.

Rated Electric PowerShows the required electric power that causes the thermistor's temperature to rise to a specified temperature by self-heating, at ambient temperature of 25 °C.

Permissible Operating Current It is possible to keep the thermistor's temperature rising max. 1°C.

Thermal DissipationConstant

Shows necessary electric power that Thermistor's temperature rises 1°C by self-heating.It is calculated by the next formula (mW/°C).

B-Constant

Calculated between two specified ambient temperatures by the next formula.T and T0 is absolute temperature (K).

Rn (R/R0)B =

1/TY1/T0

PC =

TYT0

102

101

Res

ista

nce

vs. T

empe

ratu

re C

hara

cter

istic

s, R

/R25

–20Temperature (°C)

0 20 40 60 80 12010010–2

10–1

1

B=3450B=3900B=4100

Basic Characteristics

T1

T0

Time

63.2%

X

Tem

pera

ture

Please inquire about test conditions and ratings.

Page 9: NTC Thermistors Catalog

NTC ThermistorsTemperature Sensor and Compensation 0201 (0603) Size

Electrode(Ag System + Ni Plating + Sn Plating)

0.15±0.05 0.15±0.050.60±0.03

(in mm)

0.30

±0.

030.

30±

0.03

Part NumberResistance

(25°C)(ohm)

B-Constant(25-50°C)

(K)

B-Constant(25-80°C)

(Reference Value) (K)

B-Constant(25-85°C)

(Reference Value) (K)

B-Constant(25-100°C)

(Reference Value) (K)

Permissible OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

NCP03XM102p05RL 1.0k 3500 ±1% 3539 3545 3560 1.00 100 1

NCP03XM152p05RL 1.5k 3500 ±1% 3539 3545 3560 0.81 100 1

NCP03XM222p05RL 2.2k 3500 ±1% 3539 3545 3560 0.67 100 1

NCP03XM332p05RL 3.3k 3500 ±1% 3539 3545 3560 0.55 100 1

NCP03XM472p05RL 4.7k 3500 ±1% 3539 3545 3560 0.46 100 1

NCP03XH682p05RL 6.8k 3380 ±1% 3428 3434 3455 0.38 100 1

NCP03XH103F05RL 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1

NCP03XH103p05RL 10k 3380 ±1% 3428 3434 3455 0.31 100 1

NCP03XV103p05RL 10k 3900 ±1% 3930 3934 3944 0.31 100 1

NCP03XH153p05RL 15k 3380 ±1% 3428 3434 3455 0.25 100 1

NCP03XH223p05RL 22k 3380 ±1% 3428 3434 3455 0.21 100 1

NCP03WF333p05RL 33k 4250 ±1% 4303 4311 4334 0.17 100 1

NCP03WB473p05RL 47k 4050 ±3% 4101 4108 4131 0.14 100 1

NCP03WL473p05RL 47k 4485 ±1% 4537 4543 4557 0.14 100 1

NCP03WF683p05RL 68k 4250 ±1% 4303 4311 4334 0.12 100 1

NCP03WL683p05RL 68k 4485 ±1% 4537 4543 4557 0.12 100 1

NCP03WF104F05RL 100k ±1% 4250 ±1% 4303 4311 4334 0.10 100 1

NCP03WF104p05RL 100k 4250 ±1% 4303 4311 4334 0.10 100 1

NCP03WL104p05RL 100k 4485 ±1% 4537 4543 4557 0.10 100 1

NCP03WL154p05RL 150k 4485 ±1% 4537 4543 4557 0.08 100 1

NCP03WL224p05RL 220k 4485 ±1% 4537 4543 4557 0.06 100 1

p is fi lled with resistance tolerance codes (E: ±3%, J: ±5%).

Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating, at ambient temperature of 25 °C.

Operating Temperature Range: -40°C to +125°C

Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment.

c Features1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability3. High accuracy in resistance and B-Constant4. Refl ow soldering possible5. NCP series are recognized by UL/cUL. (UL1434, File No.E137188)

c Applications1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications2. Temperature sensor for rechargeable batteries

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

1

Page 10: NTC Thermistors Catalog

NTC ThermistorsTemperature Sensor and Compensation 0402 (1005) Size

Electrode(Ag System + Ni Plating + Sn Plating)

0.25±0.10 0.25±0.101.0±0.05

(in mm)

0.5±

0.05

0.5±

0.05

Continued on the following page.

Part NumberResistance

(25°C)(ohm)

B-Constant(25-50°C)

(K)

B-Constant(25-80°C)

(Reference Value) (K)

B-Constant(25-85°C)

(Reference Value) (K)

B-Constant(25-100°C)

(Reference Value) (K)

Permissible OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

NCP15XC220p03RC 22 3100 ±3% 3126 3128 3136 6.70 100 1

NCP15XC330p03RC 33 3100 ±3% 3126 3128 3136 5.50 100 1

NCP15XC470p03RC 47 3100 ±3% 3126 3128 3136 4.60 100 1

NCP15XC680p03RC 68 3100 ±3% 3126 3128 3136 3.80 100 1

NCP15XF101p03RC 100 3250 ±3% 3282 3284 3296 3.10 100 1

NCP15XF151p03RC 150 3250 ±3% 3282 3284 3296 2.50 100 1

NCP15XM221p03RC 220 3500 ±3% 3539 3545 3560 2.10 100 1

NCP15XM331p03RC 330 3500 ±3% 3539 3545 3560 1.70 100 1

NCP15XQ471p03RC 470 3650 ±2% 3688 3693 3706 1.40 100 1

NCP15XQ681p03RC 680 3650 ±3% 3688 3693 3706 1.20 100 1

NCP15XQ102p03RC 1.0k 3650 ±2% 3688 3693 3706 1.00 100 1

NCP15XW152p03RC 1.5k 3950 ±3% 3982 3987 3998 0.81 100 1

NCP15XW222p03RC 2.2k 3950 ±3% 3982 3987 3998 0.67 100 1

NCP15XW332p03RC 3.3k 3950 ±3% 3982 3987 3998 0.55 100 1

NCP15XM472p03RC 4.7k 3500 ±2% 3539 3545 3560 0.46 100 1

NCP15XW472p03RC 4.7k 3950 ±3% 3982 3987 3998 0.46 100 1

NCP15XW682p03RC 6.8k 3950 ±3% 3982 3987 3998 0.38 100 1

NCP15XH103D03RC 10k ±0.5% 3380 ±0.7% 3428 3434 3455 0.31 100 1

NCP15XH103F03RC 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1

NCP15XH103p03RC 10k 3380 ±1% 3428 3434 3455 0.31 100 1

NCP15XV103p03RC 10k 3900 ±3% 3930 3934 3944 0.31 100 1

NCP15XW153p03RC 15k 3950 ±3% 3982 3987 3998 0.25 100 1

NCP15XW223p03RC 22k 3950 ±3% 3982 3987 3998 0.21 100 1

NCP15WL223p03RC 22k 4485 ±1% 4537 4543 4557 0.21 100 1

NCP15WB333p03RC 33k 4050 ±3% 4101 4108 4131 0.17 100 1

NCP15WL333p03RC 33k 4485 ±1% 4537 4543 4557 0.17 100 1

Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment.

c Features1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability3. High accuracy in resistance and B-Constant4. Refl ow soldering possible5. Same B-constant in the same resistance in the three sizes (0805 size / 0603 size / 0402 size) Downsize is easy for design.6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188)

c Applications1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation in general use of electric circuits

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

2

Page 11: NTC Thermistors Catalog

Continued from the preceding page.

p is fi lled with resistance tolerance codes (E: ±3%, J: ±5%).

Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating, at ambient temperature of 25 °C.

Operating Temperature Range: -40°C to +125°C

Part NumberResistance

(25°C)(ohm)

B-Constant(25-50°C)

(K)

B-Constant(25-80°C)

(Reference Value) (K)

B-Constant(25-85°C)

(Reference Value) (K)

B-Constant(25-100°C)

(Reference Value) (K)

Permissible OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

NCP15WB473D03RC 47k ±0.5% 4050 ±0.5% 4101 4108 4131 0.14 100 1

NCP15WB473F03RC 47k ±1% 4050 ±1% 4101 4108 4131 0.14 100 1

NCP15WB473p03RC 47k 4050 ±1% 4101 4108 4131 0.14 100 1

NCP15WL473p03RC 47k 4485 ±1% 4537 4543 4557 0.14 100 1

NCP15WD683p03RC 68k 4150 ±3% 4201 4209 4232 0.12 100 1

NCP15WL683p03RC 68k 4485 ±1% 4537 4543 4557 0.12 100 1

NCP15WF104D03RC 100k ±0.5% 4250 ±0.5% 4303 4311 4334 0.10 100 1

NCP15WF104F03RC 100k ±1% 4250 ±1% 4303 4311 4334 0.10 100 1

NCP15WF104p03RC 100k 4250 ±1% 4303 4311 4334 0.10 100 1

NCP15WL104p03RC 100k 4485 ±1% 4537 4543 4557 0.10 100 1

NCP15WL154p03RC 150k 4485 ±1% 4537 4543 4557 0.08 100 1

NCP15WM154p03RC 150k 4500 ±3% 4571 4582 4614 0.08 100 1

NCP15WM224p03RC 220k 4500 ±3% 4571 4582 4614 0.06 100 1

NCP15WM474p03RC 470k 4500 ±3% 4571 4582 4614 0.04 100 1

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

2

Page 12: NTC Thermistors Catalog

NTC ThermistorsTemperature Sensor and Compensation 0603 (1608) Size

Electrode(Ag System + Ni Plating + Sn Plating)

0.2-0.6 0.2-0.61.6±0.15

(in mm)

0.8±

0.15

0.8±

0.15

Continued on the following page.

Part NumberResistance

(25°C)(ohm)

B-Constant(25-50°C)

(K)

B-Constant(25-80°C)

(Reference Value) (K)

B-Constant(25-85°C)

(Reference Value) (K)

B-Constant(25-100°C)

(Reference Value) (K)

Permissible OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

NCP18XF101p03RB 100 3250 ±3% 3282 3284 3296 3.10 100 1

NCP18XF151p03RB 150 3250 ±3% 3282 3284 3296 2.50 100 1

NCP18XM221p03RB 220 3500 ±3% 3539 3545 3560 2.10 100 1

NCP18XM331p03RB 330 3500 ±3% 3539 3545 3560 1.70 100 1

NCP18XQ471p03RB 470 3650 ±2% 3688 3693 3706 1.40 100 1

NCP18XQ681p03RB 680 3650 ±3% 3688 3693 3706 1.20 100 1

NCP18XQ102p03RB 1.0k 3650 ±2% 3688 3693 3706 1.00 100 1

NCP18XW152p03RB 1.5k 3950 ±3% 3982 3987 3998 0.81 100 1

NCP18XW222p03RB 2.2k 3950 ±3% 3982 3987 3998 0.67 100 1

NCP18XW332p03RB 3.3k 3950 ±3% 3982 3987 3998 0.55 100 1

NCP18XM472p03RB 4.7k 3500 ±2% 3539 3545 3560 0.46 100 1

NCP18XW472p03RB 4.7k 3950 ±3% 3982 3987 3998 0.46 100 1

NCP18XW682p03RB 6.8k 3950 ±3% 3982 3987 3998 0.38 100 1

NCP18XH103D03RB 10k ±0.5% 3380 ±0.7% 3428 3434 3455 0.31 100 1

NCP18XH103F03RB 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1

NCP18XH103p03RB 10k 3380 ±1% 3428 3434 3455 0.31 100 1

NCP18XV103p03RB 10k 3900 ±3% 3930 3934 3944 0.31 100 1

NCP18XW153p03RB 15k 3950 ±3% 3982 3987 3998 0.25 100 1

NCP18XW223p03RB 22k 3950 ±3% 3982 3987 3998 0.21 100 1

NCP18WB333p03RB 33k 4050 ±3% 4101 4108 4131 0.17 100 1

NCP18WB473D03RB 47k ±0.5% 4030 ±0.5% 4101 4108 4131 0.14 100 1

NCP18WB473F10RB 47k ±1% 4050 ±1.5% 4101 4108 4131 0.14 100 1

NCP18WB473p03RB 47k 4050 ±2% 4101 4108 4131 0.14 100 1

NCP18WD683p03RB 68k 4150 ±3% 4201 4209 4232 0.12 100 1

NCP18WF104D03RB 100k ±0.5% 4200 ±0.5% 4255 4260 4282 0.10 100 1

NCP18WF104F12RB 100k ±1% 4200 ±1% 4255 4260 4282 0.10 100 1

Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment.

c Features1. Excellent solderability and high stability in the application's environment2. Excellent long-term stability3. High accuracy in resistance and B-constant4. Flow / Refl ow soldering possible5. Same B-Constant in the same resistance in the three sizes (0805 size / 0603 size / 0402 size) Downsize is easy for design.6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188)

c Applications1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation in general use of electric circuits

10

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

3

Page 13: NTC Thermistors Catalog

Continued from the preceding page.

Part NumberResistance

(25°C)(ohm)

B-Constant(25-50°C)

(K)

B-Constant(25-80°C)

(Reference Value) (K)

B-Constant(25-85°C)

(Reference Value) (K)

B-Constant(25-100°C)

(Reference Value) (K)

Permissible OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

NCP18WF104p03RB 100k 4250 ±2% 4303 4311 4334 0.10 100 1

NCP18WM154p03RB 150k 4500 ±3% 4571 4582 4614 0.08 100 1

NCP18WM224p03RB 220k 4500 ±3% 4571 4582 4614 0.06 100 1

NCP18WM474p03RB 470k 4500 ±3% 4571 4582 4614 0.04 100 1

p is fi lled with resistance tolerance codes (E: ±3%, J: ±5%).

Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating, at ambient temperature of 25 °C.

Operating Temperature Range: -40°C to +125°C

11

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

3

Page 14: NTC Thermistors Catalog

NTC ThermistorsTemperature Sensor and Compensation 0805 (2012) Size

2.0±0.2

0.2-0.7 0.2-0.7

Electrode(Ag System + Ni Plating + Sn Plating)

1.25

±0.

20.

85±

0.15

(in mm)

Part NumberResistance

(25°C)(ohm)

B-Constant(25-50°C)

(K)

B-Constant(25-80°C)

(Reference Value) (K)

B-Constant(25-85°C)

(Reference Value) (K)

B-Constant(25-100°C)

(Reference Value) (K)

Permissible OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

NCP21XM221J03RA 220 ±5% 3500 ±3% 3539 3545 3560 3.00 200 2

NCP21XQ471J03RA 470 ±5% 3650 ±3% 3688 3693 3706 2.00 200 2

NCP21XQ102J03RA 1.0k ±5% 3650 ±3% 3688 3693 3706 1.40 200 2

NCP21XW222J03RA 2.2k ±5% 3950 ±3% 3982 3987 3998 0.90 200 2

NCP21XM472J03RA 4.7k ±5% 3500 ±3% 3539 3545 3560 0.65 200 2

NCP21XV103J03RA 10k ±5% 3900 ±3% 3930 3934 3944 0.44 200 2

NCP21XW153J03RA 15k ±5% 3950 ±3% 3982 3987 3998 0.36 200 2

NCP21XW223J03RA 22k ±5% 3950 ±3% 3982 3987 3998 0.30 200 2

NCP21WB333J03RA 33k ±5% 4050 ±3% 4101 4108 4131 0.24 200 2

NCP21WB473J03RA 47k ±5% 4050 ±3% 4101 4108 4131 0.20 200 2

NCP21WF104J03RA 100k ±5% 4250 ±3% 4303 4311 4334 0.14 200 2

Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating, at ambient temperature of 25 °C.

Operating Temperature Range: -40°C to +125°C

Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment.

c Features1. Excellent solderability and high stability in the application's environment2. Excellent long-term stability3. High accuracy in resistance and B-constant4. Flow / Refl ow soldering possible5. Same B-Constant in the same resistance in the three sizes (0805 size / 0603 size / 0402 size) Downsize is easy for design.6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188)

c Applications1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation in general use of electric circuits

12

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

4

Page 15: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions

Chip LandSolder Resist

b a

c

Part Number SolderingMethods Chip (LxW)

Dimensions (mm)a b c

NCP03NCP15

NCP18

NCP21

Reflow SolderingReflow SolderingFlow Soldering

Reflow SolderingFlow Soldering

Reflow Soldering

0.6x0.31.0x0.5

1.6x0.8

2.0x1.25

0.250.4

0.6-1.00.6-0.81.0-1.11.0-1.1

0.30.4-0.50.8-0.90.6-0.70.9-1.00.6-0.7

0.30.5

0.6-0.80.6-0.81.0-1.21.0-1.2

13

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 16: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

Temp. ( C)B-ConstantResistance

Part Number

355.823273.975213.003166.943131.997105.31884.67068.62855.98145.85937.81931.39626.21122.00018.56015.73513.40311.4629.8428.4887.3486.3995.5954.8964.2993.7953.3602.9832.6562.3672.1161.9011.7121.543

NCP15XC220

Resistance (Ω)533.734410.962319.504250.415197.996157.978127.005102.94283.97268.78956.72847.09439.31733.00027.84023.60320.10417.19314.76312.73211.0229.5988.3927.3456.4485.6925.0404.4743.9833.5513.1732.8512.5682.314

NCP15XC330

Resistance (Ω)760.166585.310455.051356.652281.994224.998180.886146.614119.59697.97280.79467.07355.99747.00039.65133.61628.63324.48721.02618.13315.69813.67011.95210.4619.1848.1077.1796.3735.6735.0574.5204.0603.6573.296

NCP15XC470

Resistance (Ω)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

11822.4738767.7456570.2244971.7843796.9332923.4002269.5991775.2251399.0501110.220887.257713.463577.375470.000384.800316.757262.177218.069182.297153.150129.249109.55193.28179.75068.44658.99651.03644.33238.64033.79029.66426.12323.09120.472

NCPppXQ471

Resistance (Ω)17104.85412685.2489505.8557193.2195493.4364229.5993283.6752568.4112024.1581606.2751283.6911032.245835.351680.000556.733458.287379.320315.504263.749221.579186.998158.499134.960115.38399.02985.35673.83964.14055.90548.88842.91837.79533.40929.618

NCPppXQ681

Resistance (Ω)

Continued on the following page.

3100K 3100K 3100K

3650K 3650K

22Ω 33Ω 47Ω

470Ω 680Ω

Temp. (°C)B-ConstantResistance

Part Number

1099.815846.832658.372516.007407.991325.529261.707212.123173.033141.747116.89497.04281.01668.00057.36848.63641.42635.42830.42126.23522.71219.77817.29315.13413.28811.72910.3869.2208.2087.3176.5395.8745.2914.768

NCP15XC680

Resistance (Ω)3100K68Ω

1824.1751390.6851070.653831.138650.960514.441409.700328.877265.759215.785176.395145.161120.152100.00083.66970.36159.45650.47043.02936.83031.64927.36423.75620.65118.01115.80013.90812.26310.8449.6228.5637.6486.8506.162

NCPppXF101

Resistance (Ω)2736.2622086.0281605.9791246.708976.440771.661614.550493.315398.639323.677264.592217.742180.228150.000125.503105.54189.18475.70564.54355.24647.47341.04535.63430.97627.01623.70020.86218.39416.26514.43412.84411.47210.2759.243

NCPppXF151

Resistance (Ω)4947.9043703.7552798.8732135.8871645.0371278.0341000.620789.612627.752502.474405.010328.480268.044220.000181.576150.668125.681105.33688.71775.05963.77754.41546.63140.11534.63730.01326.11022.79019.95717.54115.45313.66312.11410.778

NCPppXM221

Resistance (Ω)7421.8565555.6324198.3093203.8312467.5551917.0511500.9301184.418941.628753.711607.514492.720402.066330.000272.365226.002188.521158.004133.076112.58895.66681.62269.94660.17251.95545.01939.16534.18629.93526.31223.18020.49418.17116.168

NCPppXM331

Resistance (Ω)3250K 3250K 3500K 3500K100Ω 150Ω 220Ω 330Ω

75.96154.52039.60729.10321.60116.19812.2649.3707.2195.6094.3913.4632.7512.2001.7711.4341.1690.9580.7890.6540.5450.4560.3830.3240.2750.2340.2000.1720.1490.1290.1120.0980.0850.075

NCPppXW222

Resistance (kΩ)25.15418.65513.97910.5788.0796.2204.8293.7772.9772.3621.8881.5181.2291.0000.8190.6740.5580.4640.3880.3260.2750.2330.1990.1700.1460.1260.1090.0940.0820.0720.0630.0560.0490.044

NCPppXQ102

Resistance (kΩ)51.79137.17227.00519.84314.72811.0448.3626.3894.9223.8252.9942.3611.8761.5001.2070.9780.7970.6530.5380.4460.3710.3110.2610.2210.1870.1600.1370.1170.1010.0880.0760.0670.0580.051

NCPppXW152

Resistance (kΩ)3950K3650K 3950K2.2kΩ1.0kΩ

21.26616.15012.3479.5037.3655.7474.5163.5722.8442.2801.8391.4921.2181.0000.8250.6850.5710.4790.4030.3410.2900.2470.2120.1820.1570.1360.1190.1040.0910.0800.0700.0620.0550.049

NCPppXM102

Resistance (kΩ)3500K1.0kΩ

31.89924.22518.52014.25511.0478.6216.7735.3584.2663.4192.7582.2381.8271.5001.2381.0270.8570.7180.6050.5120.4350.3710.3180.2740.2360.2050.1780.1550.1360.1200.1050.0930.0830.074

NCPppXM152

Resistance (kΩ)3500K1.5kΩ

46.78635.53027.16220.90716.20312.6449.9347.8586.2575.0154.0453.2832.6802.2001.8161.5071.2571.0530.8870.7510.6380.5440.4660.4010.3460.3000.2610.2280.2000.1750.1550.1370.1210.108

NCPppXM222

Resistance (kΩ)3500K2.2kΩ1.5kΩ

Detailed Resistance - Temperature Tables are downloadable from the following URL.

http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en

14

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 17: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)

Continued from the preceding page.

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

113.94181.77959.41143.65432.40124.29718.39614.05510.8298.4146.5865.1954.1263.3002.6562.1521.7531.4371.1840.9810.8170.6840.5750.4860.4120.3510.3010.2580.2230.1930.1680.1460.1280.113

NCPppXW332

Resistance (kΩ)

NCPppXV103

328.996237.387173.185127.77395.32771.74654.56441.81332.33025.19419.78515.65112.46810.0008.0726.5565.3564.4013.6353.0192.5212.1151.7811.5091.2841.0970.9410.8100.7010.6080.5300.4630.4060.358

Resistance (kΩ)293.478222.256170.021131.338102.35580.47463.75950.83840.82833.03226.88822.01018.12115.00012.47210.4228.7517.3756.2415.3024.5213.8793.3412.8872.5032.1781.9021.6641.4611.2871.1371.0070.8950.797

NCPppXH153

Resistance (kΩ)Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

Continued on the following page.

3950K

3900K 3380K

3.3kΩ

10kΩ 15kΩ

70.17953.29540.74331.36024.30418.96614.90111.7879.3867.5236.0674.9244.0193.3002.7242.2601.8851.5801.3311.1260.9570.8160.7000.6020.5200.4500.3920.3420.2990.2630.2320.2050.1820.162

NCPppXM332

Resistance (kΩ)3500K3.3kΩ

Temp. (°C)B-ConstantResistance

Part Number

Temp. (°C)B-ConstantResistance

Part Number

NCPppXM472

105.70579.12659.79445.63035.14427.30321.37716.86913.41110.7358.6537.0185.7264.7003.8793.2192.6852.2501.8951.6041.3631.1630.9960.8570.7400.6410.5580.4870.4260.3750.3300.2920.2590.230

Resistance (kΩ)133.043100.75677.07659.54046.40136.48228.90423.04718.50914.97412.1899.9788.2156.8005.6544.7253.9673.3442.8292.4042.0501.7591.5151.3091.1350.9880.8620.7550.6620.5830.5150.4570.4060.361

NCPppXH682

Resistance (kΩ)234.787168.515122.42289.95366.76650.06637.90628.96322.31317.33813.57110.7058.5036.8005.4744.4343.6132.9612.4402.0221.6831.4091.1851.0010.8490.7240.6200.5320.4590.3980.3460.3020.2640.232

NCPppXW682

Resistance (kΩ)195.652148.171113.34787.55968.23753.65042.50633.89227.21922.02117.92614.67412.08110.0008.3156.9485.8344.9174.1613.5353.0142.5862.2281.9251.6691.4521.2681.1100.9740.8580.7580.6720.5960.531

NCPppXH103

Resistance (kΩ)3500K 3380K 3950K 3380K4.7kΩ

NCPppXW472

162.279116.47484.61562.17346.14734.60426.20020.01815.42311.9849.3807.3995.8774.7003.7833.0642.4972.0461.6861.3971.1640.9740.8190.6920.5870.5000.4280.3680.3180.2750.2390.2080.1820.160

Resistance (kΩ)3950K4.7kΩ 6.8kΩ 6.8kΩ 10kΩ

197.390149.390114.34088.38168.91554.16642.88934.19627.44522.16518.01014.72012.09910.0008.3096.9395.8244.9114.1603.5393.0242.5932.2331.9291.6731.4551.2701.1120.9760.8600.7590.6730.5980.532

NCPppXH103D

Resistance (kΩ)3380K

10kΩ±0.5%

NCPppXW223

759.605545.196396.070291.025216.008161.977122.63893.70272.19156.09343.90734.63327.50922.00017.70914.34411.6889.5787.8946.5405.4464.5593.8323.2392.7482.3422.0041.7221.4861.2871.1190.9750.8540.750

Resistance (kΩ)1073.436753.900535.073383.590277.643202.813149.462111.08283.23362.85847.83136.66428.30422.00017.21413.55710.7448.5666.8715.5444.4983.6693.0092.4792.0521.7071.4261.1961.0080.8520.7240.6170.5280.454

NCPppWL223

Resistance (kΩ)1227.263874.449630.851460.457339.797253.363190.766144.964111.08785.84266.86152.47041.47133.00026.43021.29817.26614.07611.5389.5067.8706.5495.4754.5953.8743.2822.7892.3792.0381.7511.5091.3061.1340.987

NCPppWB333

Resistance (kΩ)1451.0491019.238725.084522.021379.842279.371207.566155.639117.81489.92569.20453.67541.93733.00026.14320.84516.72313.49810.9548.9407.3346.0465.0114.1703.4872.9282.4692.0911.7771.5161.2981.1160.9620.832

NCPppWF333

Resistance (kΩ)3950K 4485K 4050K 4250K22kΩ 22kΩ 33kΩ 33kΩ

430.434325.976249.364192.629150.121118.02993.51474.56359.88148.44639.43632.28226.57722.00018.29215.28512.83410.8179.1547.7776.6315.6904.9014.2343.6713.1952.7902.4412.1421.8881.6681.4771.3121.169

NCPppXH223

Resistance (kΩ)3380K22kΩ

517.912371.724270.048198.426147.278110.43983.61763.88849.22138.24529.93623.61318.75615.00012.0749.7807.9696.5315.3824.4593.7133.1082.6132.2081.8731.5971.3671.1741.0130.8780.7630.6650.5820.511

NCPppXW153

Resistance (kΩ)3950K15kΩ

Detailed Resistance - Temperature Tables are downloadable from the following URL.

http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en

15

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 18: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)

Continued from the preceding page.

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

1610.1541130.850802.609575.385416.464304.219224.193166.623124.85094.28771.74754.99642.45533.00025.82220.33516.11512.84910.3068.3176.7485.5044.5133.7183.0782.5602.1391.7941.5111.2781.0850.9250.7920.681

NCPppWL333

Resistance (kΩ)1747.9201245.428898.485655.802483.954360.850271.697206.463158.214122.25995.22774.73059.06547.00037.64330.33424.59120.04816.43313.53911.2099.3287.7986.5445.5184.6743.9723.3882.9022.4942.1501.8601.6151.406

NCPppWB473

Resistance (kΩ)4485K 4050K33kΩ 47kΩ

Temp. (°C)B-ConstantResistance

Part Number

Temp. (°C)B-ConstantResistance

Part Number NCPppWF104

4397.1193088.5992197.2251581.8811151.037846.579628.988471.632357.012272.500209.710162.651127.080100.00079.22263.16750.67740.90433.19527.09122.22418.32315.18412.63510.5668.8737.4816.3375.3844.5943.9343.3802.9162.522

Resistance (kΩ)4250K100kΩ

NCP15WF104D

4221.2832995.0442146.9961554.5991136.690839.019624.987469.678355.975272.011209.489162.559127.057100.00079.22263.16750.67740.90433.19527.09122.22418.32315.18412.63510.5668.8737.4816.3375.3844.5943.9343.3802.9162.522

Resistance (kΩ)4250K

100kΩ±0.5%

Continued on the following page.

1743.0851241.814896.201654.460483.172360.367271.363206.204158.051122.14595.14574.67659.03847.00037.66730.38124.65420.12416.51813.63111.3069.4247.8926.6395.6094.7594.0543.4682.9772.5662.2201.9271.6791.468

NCP18WB473D

Resistance (kΩ)4030K47kΩ

1690.5861215.318882.908647.911480.069359.009270.868206.113158.126122.26795.25674.75459.07547.00037.63630.32624.58320.04316.43313.54511.2239.3457.8186.5715.5484.7044.0043.4222.9362.5282.1841.8931.6461.436

NCP15WB473D

Resistance (kΩ)4050K47kΩ

2990.0412100.2471494.1131075.679782.705575.674427.712320.710242.768185.300142.603110.60286.41568.00053.87142.95434.46027.81422.57218.42215.11312.45910.3258.5927.1856.0335.0874.3093.6613.1242.6752.2991.9831.715

NCPppWF683

Resistance (kΩ)3317.8932330.2371653.8621185.641858.168626.875461.974343.345257.266194.287147.841113.32587.48468.00053.20841.90333.20826.47721.23717.13713.90411.3429.2997.6626.3435.2764.4073.6973.1142.6342.2361.9071.6321.403

NCPppWL683

Resistance (kΩ)4250K 4485K68kΩ 68kΩ

2735.3591937.3911389.3451008.014738.978547.456409.600309.217235.606180.980140.139109.34485.92968.00054.16743.42135.01628.40623.16618.99715.65712.96710.7949.0217.5756.3875.4074.5983.9223.3592.8872.4892.1551.870

NCPppWD683

Resistance (kΩ)4150K68kΩ

2293.2491610.6051143.110819.487593.146433.281319.305237.312177.816134.287102.18478.32760.46747.00036.77628.96222.95218.30114.67911.8459.6107.8396.4275.2964.3843.6463.0462.5552.1521.8201.5461.3181.1280.970

NCPppWL473

Resistance (kΩ)4485K47kΩ

NCP18WF104D/F

4205.6862966.4362118.7891531.3191118.422825.570615.526463.104351.706269.305207.891161.722126.723100.00079.43963.50951.08441.33633.62827.51022.62118.69215.52512.94710.8499.1297.7136.5465.5724.7644.0873.5183.0402.634

Resistance (kΩ)4200K

100kΩ±1%

11585.8848016.9735623.9313990.1002861.7842076.1621520.9091125.049839.912632.521480.194367.455283.310220.000172.012135.364107.19885.41968.44155.15344.66536.37929.76324.46220.20516.76113.96211.6849.8098.2706.9985.9425.0674.334

NCPppWM224

Resistance (kΩ)4500K220kΩ

NCPppWL224

10734.3587539.0015350.7293835.8982776.4272028.1261494.6201110.822832.332628.577478.310366.639283.036220.000172.143135.569107.43685.66268.70855.44444.98436.69430.08524.78920.52317.06814.25811.96110.0758.5217.2366.1695.2814.540

Resistance (kΩ)4485K220kΩ

7318.8815140.2283648.2242615.3851893.0181382.8131019.059757.379567.499428.575326.121249.981192.979150.000117.37092.43373.25258.40646.84637.80330.67125.01820.51316.90213.99311.6389.7218.1556.8695.8104.9334.2063.6013.096

NCPppWL154

Resistance (kΩ)7899.4665466.1183834.4992720.5231951.2161415.5651036.984767.079572.667431.264327.405250.538193.166150.000117.28192.29373.09058.24046.66537.60530.45324.80420.29316.67913.77611.4289.5207.9666.6885.6394.7724.0523.4542.955

NCPppWM154

Resistance (kΩ)4485K 4500K150kΩ 150kΩ

4879.2543426.8182432.1491743.5901262.012921.875679.373504.919378.333285.717217.414166.654128.653100.00078.24761.62248.83538.93731.23125.20220.44816.67913.67511.2689.3297.7586.4815.4374.5803.8733.2892.8042.4002.064

NCPppWL104

Resistance (kΩ)4485K100kΩ

Detailed Resistance - Temperature Tables are downloadable from the following URL.

http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en

16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 19: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)

Continued from the preceding page.

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

24751.66117127.16912014.7628524.3056113.8114435.4373249.2162403.5151794.3581351.2941025.870785.018605.252470.000367.480289.186229.014182.485146.215117.82895.42077.71863.58452.26043.16635.80829.82824.96120.95517.66814.95112.69510.8249.259

NCPppWM474

Resistance (kΩ)4500K470kΩ

Temp. (°C)B-ConstantResistance

Part Number

Detailed Resistance - Temperature Tables are downloadable from the following URL.

http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 20: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type !Caution/Notice

c !Caution (Storage and Operating Conditions)This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics or cause failures and burn-out.1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)

2. Volatile or fl ammable gas3. Dusty conditions4. Under vacuum, or under high or low pressure5. Wet or humid locations6. Places with salt water, oils, chemical liquids or organic solvents7. Strong vibrations8. Other places where similar hazardous conditions exist

c !Caution (Others)

c Notice (Storage and Operating Conditions)

c Notice (Rating)Use this product within the specifi ed temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.

c Notice (Handling)

Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product.

The ceramic of this product is fragile, and care mustbe taken not to load an excessive press-force or to cause a shock at handling. Such forces may cause cracking or chipping.

18

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

To keep the solderability of the product from degrading, the following storage conditions are recommended.1. Storage condition: Temperature -10 to +40°C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by fi rst-in and fi rst-out stocking system.3. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight.

Page 21: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type !Caution/Notice

Locate this product horizontal to the direction in which stress acts.

Keep this product on the PC Board away from the Separation Line. Worst ← A-C-B-D → Better

Component Direction

Mounting Close to Board Separation Line

A

B

D

CPerforationHoles

Slit

1. Mounting Position

2. Allowable Soldering Temperature and Time

Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.

(a) Solder within the temperature and time combinations indicated by the slanted lines in the following graphs.

(b) Excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode.

(c) In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure below. (For example, Reflow peak temperature: 260°C, twice -> The total accumulated soldering time at 260°C is within 30 seconds.)

Continued on the following page.

Allowable Reflow Soldering Temp. and Time

Allowable Reflow Soldering Temp. and Time

Time (sec.)

Tem

pera

ture

(°C

)

280

270

260

250

240

230

220

2100 10 20 30

Time (sec.)

Tem

pera

ture

(°C

)

280

270

260

250

240

230

220

2100 1109020 30 40 50 60 70 1008010

Time (sec.)

Tem

pera

ture

(°C

)280

270

260

250

240

230

2200 9020 30 40 50 60 70 8010

NCP03/15 Series

Allowable Flow Soldering Temp. and Time

NCP18/21 Series

c Notice (Soldering and Mounting)

19

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 22: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type !Caution/Notice

For removing the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change of the external electrodes' quality.

occurrence of resonance in ultrasonic cleaning.

non-wash-type flux.

your reference, we use the solder paste below for any internal tests of this product.

We use the solder paste below for any internal tests of this product.

Use rosin type flux in the soldering process.

caused in the product characteristics and reliability.

(*Water-soluble flux can be defined as non-rosin type flux including wash-type flux and non-wash-type flux.)

NCP03/15 NCP18/21

Continued from the preceding page.

After cleaning, promptly dry this product.

room temp. or less than

r

room temp. or less than

r Frequency of several

Solvent

Dipping Cleaning

Ultrasonic Cleaning

(b) Rapid cooling by dipping in solvent or by other means is not recommended.

time should be within the range shown in the figure of

Reflow Soldering Conditions

Reflow Soldering Conditions

SolderingGradual Cooling

(in air)

±

SolderingGradual Cooling

(in air)

±

SolderingGradual Cooling

(in air)

±

NCP03/15 Series

Flow Soldering Conditions

NCP18/21 Series

Continued on the following page.

20

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 23: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type !Caution/Notice

o Thin or insufficient adhesive may result in loose component contact with land during flow soldering.

o Low viscosity adhesive causes chips to slip after mounting.

NCP03

NCP15

NCP18/NCP21

100μm

150μm

200μm

1/3EVTVE

1/3EVTVE

0.2mmVTVE

Part Number Solder Paste Thickness T

Reference: Optimum Solder Amount

TE

Electrode

Solder Solder

Continued from the preceding page.

o The amount of solder is critical. Standard height of fillet is shown in the table below.

o Too much solder may cause mechanical stress, resulting in cracking, mechanical and/or electronic damage.

7. Printing Conditions of Solder Paste

8. Adhesive Application and Curing

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 24: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type Package

NCP03

NCP15

NCP18

NCP21

15,000

10,000

4,000

-

-

4,000

Part NumberPaper Tape

Quantity (pcs.)

Embossed Tape

(in mm)

(in mm)

40 min.190-250

Vacant Section

210-250

Top Tape aloneCover Tape alone

Leader Unit

Trailer Unit

Chip-mounting Unit

Direction of Feed

ø180

ø21.0±0.8

ø13.0±0.2

ø60

2.0±0.5

9.013.0±1.0

(1) A tape in a reel contains Leader unit and Trailer unit where

products are not packed. (Please refer to the figure at the

right.)

(2) The top and base tapes or plastic and cover tape are not

stuck at the first five pitches minimum.

(3) A label should be attached on the reel. (MURATA's part

number, inspection number and quantity should be marked

on the label.)

(4) Taping reels are packed in a package.

1. Dimensions of Reel

2. Taping Method

Tape Carrier Packaging

Minimum Quantity Guide

Continued on the following page.

W0Y1.5

W1.0Y0

W1.

0Y

0

22

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 25: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type Package

(1) Other Conditions

(a) Packaging

Products are packaged in the cavity of the base tape and

sealed by a top tape and bottom tape.

(b) Tape

The top tape and bottom tape have no joints and products

are packaged and sealed in the cavity of the base tape,

continuously.

(2) Peeling Force of Top Tape

(3) Pull Strength

Pull strength of top tape is specified at 10N minimum.

Pull strength of bottom tape should be specified 5N minimum.

3. Paper Tape (NCP03/15/18 Series)

NCP15 Series

NCP18 Series

1.1 max.4.0±0.1 4.0±0.12.0±0.05

ø1.5+0.1/–0

1.75

±0.

1

3.5±

0.05

8.0±

0.3

Direction of Feed

1.05∗

0.8 max.4.0±0.12.0±0.05

ø1.5+0.1/–0 1.75

±0.

1

3.5±

0.05

1.15

8.0±

0.3

Direction of Feed

0.65∗

(in mm)∗ Reference Value

∗ Reference Value

165-180° F

∗ 1 Peeling angle: 165 to 180° against the fixed surface of tape.

∗ 2 Peeling speed: 300mm/min.

∗ 3 Peeling force: 0.1 - 0.6N

Continued on the following page.

Continued from the preceding page.1.

85∗

∗ Reference Value

NCP03 Series

0.5 max.4.0±0.12.0±0.05

ø1.5+0.1/–0 1.75

±0.

1

3.5±

0.05

0.68

8.0±

0.3

Direction of Feed

0.38∗

23

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 26: NTC Thermistors Catalog

Temperature Sensor and Compensation Chip Type Package

∗ 1 Peeling angle: 165 to 180° against the fixed surface of tape.

∗ 2 Peeling speed: 300mm/min.

∗ 3 Peeling force: 0.1 - 0.7N

F165-180°

Continued from the preceding page.

(2) Peeling Force of Cover Tape

(3) Tape Strength

Pull strength of Embossed tape and Cover tape should be

specified 10N minimum.

(1) Other Conditions

(a) Packaging

Products are packaged in the each cavity of Embossed

tape and sealed by Cover tape.

(b) Tape

Cover tape has no joints.

4. Embossed Tape (NCP21 Series)

1.050.2

4.0±0.12.0±0.05

4.0±0.1 ø1.5

1.75

±0.

1

ø1.0 1.45∗ ∗ Reference Value

3.5±

0.05

8.0±

0.3

Direction of Feed

2.25

(in mm)

+0.3-0

+0.1-1

24

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 27: NTC Thermistors Catalog

NTC ThermistorsTemperature Sensor Thermo String Type

This product is a small fl exible lead type NTC Thermistor with a small head and a thin lead wire.

c Features1. This small and highly accurate NTC Thermistor provides extremely precise temperature sensing.2. The small sensing head and thin lead wire deliver temperature sensing in a narrow space.3. Flexibility and a wide variety of lengths (25mm to 150mm) enable the design of fl exible temperature sensing architectures. 4. This product is compatible with our 0402 (EIA) size chip Thermistor.5. Excellent long-term stability6. This is a halogen free product. * * Cl= max.900ppm, Br=max.900ppm and Cl+Br=max.1500ppm7. NXFT series are recognized by UL/cUL. (UL1434, File No.E137188).

c Applications1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation in general use of electric circuits

1.2±0.4

25 to

100

±2

110

to 1

50±

3

3+2/

-1

1.2±0.4

ø0.30±0.05

The full length 25mm, 30 to 150mm interval 10mm. (in mm)

1.2±0.4

25 to

100

±2

110

to 1

50±

3

3+2/

-1

1.2±0.4

ø0.30±0.05

The full length 25mm, 30 to 150mm interval 10mm. (in mm)

p is fi lled with lead shape (1: twist, 2: without twist).

ppp is fi lled with Total-length codes. (25mm, 30 to 150mm interval 10mm, ex. 050=50mm)

Operating Current for Sensor rises Thermistor's temperature by 0.1°C

Rated Electric Power shows the required electric power that the thermistor's temperature rise to 30°C by self-heating, at ambient temperature of 25 °C.

Operating Temperature Range: -40°C to +125°C

25

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

5

NXFT15_1B Type (twist)

NXFT15_2B Type (without twist)

Part NumberResistance

(25°C)(ohm)

B-Constant(25-50°C)

(K)

B-Constant(25-80°C)

(Reference Value) (K)

B-Constant(25-85°C)

(Reference Value) (K)

B-Constant(25-100°C)

(Reference Value) (K)

Operating Currentfor Sensor (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

Thermal TimeConstant(25°C) (s)

NXFT15XH103FApBppp 10k ±1% 3380 ±1% 3428 3434 3455 0.12 7.5 1.5 4

NXFT15XV103FApBppp 10k ±1% 3936 ±1% 3971 3977 3988 0.12 7.5 1.5 4

NXFT15WB473FApBppp 47k ±1% 4050 ±1% 4101 4108 4131 0.06 7.5 1.5 4

NXFT15WF104FApBppp 100k ±1% 4250 ±1% 4303 4311 4334 0.04 7.5 1.5 4

Page 28: NTC Thermistors Catalog

Temperature Sensor Thermo String Type Specifi cations and Test Methods

Hold the lead wires as in Fig-3. Bend by 90 degrees and again bend back to the initial position. Then bend to the other side by 90 degrees and again bend back to the initial position. After bending process, 10N force for 3 seconds shall be applied to the lead wire.

Fig-3

10Lead WireBending Strength

· Lead wire does not break.

Continued on the following page.

The lead wire shall be inserted in a ø1.0mm hole until resin part contacts with a substrate as shown in fig.-2, and 1N force for 10 seconds shall be applied to the lead wire.

Fig-2

9Lead WirePull Strength

· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wires are dipped into 245±5°C solder <JIS Z 3282 SnAgCu> for 2±0.5 seconds according to Fig-1.

8 Solderability More than 90% of lead wire surface shall be covered by solder.

Both lead wires are dipped into 350±10°C solder for 3.5±0.5 seconds, or 260±5°C solder for 10±1 seconds according to Fig-1 (solder <JIS Z 3282 SnAgCu>).

Fig-1

7Resistance toSoldering Heat

· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

2mm length of coating resin from the top of Thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire.

6Insulation Break -down Voltage

· No damage electrical characteristics at DC100 V, 1 min.

85±2°C in air, with 'Operating Current for Sensor' for 1000 +48/-0 hrs.

5High TemperatureLoad

-40 +0/-3°C, 30 minutes in air+25±2°C, 10 to 15 minutes in air+125±2°C, 30 minutes in air +25 +2/-0°C, 10 to 15 minutes in air (1 cycle)Continuous 100 cycles, without loading.

4Temperature Cycle

60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading.

3HumidityStorage Test

· Resistance (R25°C) fluctuation rate: less than ±2%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

-40 +0/-3°C in air, for 1000 +48/-0 hours without loading.2Low TemperatureStorage Test

125±2°C in air, for 1000 +48/-0 hours without loading.1High TemperatureStorage Test · Resistance (R25°C) fluctuation rate: less than ±1%.

· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

No. Test MethodsSpecificationsItem

* · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).

Solder

1 to 2mm

1N (10 sec.)

10N (3 sec.)

26

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

5

Page 29: NTC Thermistors Catalog

Temperature Sensor Thermo String Type Specifi cations and Test Methods

Continued from the preceding page.

NTC Thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, Frequency sequence of 10Hz - 55Hz - 10Hz in 1 minute shall be applied for right angled 3 directions for 2 hours duration each.

12 Vibration

NTC Thermistor shall be dropped without any force onto concrete floor from 1 meter height one time.

11 Free Fall

· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.· No visible damage at resin part.

* · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).

No. Test MethodsSpecificationsItem

Mount

Solder is attached from the reverse side.

OscillatingDirection Z

Oscillating Direction X

OscillatingDirection Y

27

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

5

Page 30: NTC Thermistors Catalog

NTC ThermistorsTemperature Sensor Lead Type

(in mm)

10.0 to 40.0±1.0

4.0 max.

2.5±1

The full length 10.0 to 40.0mm interval 10.0mm

2.0 max.

ø0.40±0.05

This thermistor is for normal temperature level sensors having self-subsistence due to strong lead strength based on chip NTC.

c Features1. This highly accurate NTC Thermistor provides extremely precise temperature sensing.2. This product is compatible with 1005 (1.0mm x 0.5mm) size NTC Thermistor.3. The variation per hour of this product is highly stable.4. This product is produced with an automation line that was consistent from lead to packaging so that a product of uniform quality may be obtained at low cost in large quantities.5. Since this product has strong lead intensity with original lead mounting technique, it is bent at the time of use and can withstand processing, etc., readily. Taping package can be supported.

c Applications1. For temperature detection of a rechargeable battery pack2. For temperature detection of a charge circuit3. For temperature detection of a printer head4. For temperature detection of a DC fan motor5. For temperature detection of home electronics

Part NumberResistance

(25°C)(ohm)

B-Constant(25-50°C)

(K)

B-Constant(25-80°C)

(Reference Value) (K)

B-Constant(25-85°C)

(Reference Value) (K)

B-Constant(25-100°C)

(Reference Value) (K)

Operating Currentfor Sensor (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

Thermal TimeConstant(25°C) (s)

NXRT15XM202EA1Bppp 2k ±3% 3500 ±1% 3539 3545 3560 0.27 7.5 1.5 4

NXRT15XV502FA1Bppp 5k ±1% 3936 ±1% 3972 3977 3989 0.17 7.5 1.5 4

NXRT15XH103FA1Bppp 10k ±1% 3380 ±1% 3428 3434 3455 0.12 7.5 1.5 4

NXRT15XV103FA1Bppp 10k ±1% 3936 ±1% 3971 3977 3988 0.12 7.5 1.5 4

NXRT15WB333JA1Bppp 33k ±5% 4050 ±3% 4101 4108 4131 0.07 7.5 1.5 4

NXRT15WB473FA1Bppp 47k ±1% 4050 ±1% 4101 4108 4131 0.06 7.5 1.5 4

NXRT15WF104FA1Bppp 100k ±1% 4250 ±1% 4303 4311 4334 0.04 7.5 1.5 4

ppp is fi lled with Total-length codes. (10 to 40mm interval 10mm, ex. 040=40mm)

Operating Current for Sensor rises Thermistor's temperature by 0.1°C.

Rated Electric Power is necessary electric power that thermistor's temperature rises 5°C by self-heating at 25°C in still air.

Taping type of part numbers with "3A016" is available (Lead Spacing=5mm).

Operating Temperature Range: -40°C to +125°C

28

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

6

Page 31: NTC Thermistors Catalog

Temperature Sensor Lead Type Specifi cations and Test Methods

NTC thermistor shall be fixed to the vibration test Equipment. Vibration of total 1.5mm amplitude, Frequency sequence of 10Hz – 55Hz – 10Hz in 1 minute, shall be applied for right angled 3 directions for 2 hours duration each.

12 Vibration

NTC thermistor shall be dropped without any force onto concrete floor from 1 meter height one time.

11 Free Fall

· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.· No visible damage at resin part.

* · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).

One lead wire is held and 2.5N force is applied. Then the body of NTC thermistor is bent by 90° and again bent back to the initial position. This sequence shall be completed twice. See Fig-3.

Fig-3

10Lead Wire Bending Strength

· Lead wire does not break.

One end of a lead wire shall be fixed and 2.5N force for 10 seconds shall be applied to the other lead wire as shown in Fig-2.

Fig-2

9Lead Wire Pull Strength

· Resistance(R25°C) fluctuation rate: less than ±1%.· B-Constant(B25/50°C) fluctuation rate: less than ±1%.· No visible damage at resin part.

Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wires are dipped into 245±5°C solder <Sn-3Ag-0.5Cu> for 2±0.5 seconds according to Fig-1.

8 Solderability· More than 90% of lead wire surface shall be covered by solder.

Both lead wires are dipped into 350±10°C solder for 3.5±0.5 seconds, or 260±5°C solder for 10±1 seconds according to Fig-1. (solder <Sn-3Ag-0.5Cu>)

Fig-1

7Resistance to Soldering Heat

· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

2mm length of coating resin from the top of thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire.

6Insulation Break - down Voltage

· No damage electrical characteristics on D.C.100 V, 1 min.

-40°C +0/-3°C, 30 minutes in air+25°C±2°C, 10 to 15 minutes in air+125°C +3/-0°C, 30 minutes in air+25°C +2/-0°C, 10 to 15 minutes in air (1 cycle)Continuous 100 cycles, without loading.

5Temperature Cycle

60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading.

4Humidity Storage Test

85±2°C in air, with ‘Operating Current for Sensor’ for 1000 +48/-0 hrs.

3High Temperature Load

· Resistance (R25°C) fluctuation rate: less than ±2%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

125±2°C in air, for 1000 +48/-0 hours without loading.2High Temperature Storage Test

-40 +0/-3°C in air, for 1000 +48/-0 hours without loading.1Low Temperature Storage Test · Resistance (R25°C) fluctuation rate: less than ±1%.

· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

No. Test MethodsSpecificationsItem

Solder

2.5N (10sec.)

2.5N

90°

29

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

6

Page 32: NTC Thermistors Catalog

NTC ThermistorsTemperature Sensor Lead Insulation Type (Radial Type)

This thermistor is for normal temperature level sensors having self-subsistence due to strong lead strength based on chip NTC.

c Features1. NXR series can accurately detect temperature with NCP15 series on the head of parts. 2. The insulation coat with polyulethane on the surface of lead wire : 100VDC.3. You can choose NTC characteristics from NCP15 series.4. The resistance drift is low in the reliability test.5. The production capacity is bigger and NXR is produced almost entirely in an automation line. 6. Adopt to Sb regulation

c Applications1. Secondary battery2. Temperature detection for charging3. Temperature detection for DC fan motor4. Temperature sensing for appliance5. Self-standing temperature sensing for fi re detector

(in mm)

25.0

to 4

5.0±

1.0

(5.0

mm

)

4.0 max.

The full length 25.0 to 45.0mm interval 5.0mmA: Epoxy ResinB: Copper Lead Wire with Polyurethane Coat

2.5±1.0

0.46±0.05

2.0 max.

A

B

Part NumberResistance

(25°C)(ohm)

B-Constant(25-50°C)

(K)

B-Constant(25-80°C)

(Reference Value) (K)

B-Constant(25-85°C)

(Reference Value) (K)

B-Constant(25-100°C)

(Reference Value) (K)

Operating Currentfor Sensor (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

Thermal TimeConstant(25°C) (s)

NXRT15XM202EA5Bppp 2k ±3% 3500 ±1% 3539 3545 3560 0.36 13 2.6 4

NXRT15XV502FA5Bppp 5k ±1% 3936 ±1% 3972 3977 3989 0.22 13 2.6 4

NXRT15XH103FA5Bppp 10k ±1% 3380 ±1% 3428 3434 3455 0.16 13 2.6 4

NXRT15XV103FA5Bppp 10k ±1% 3936 ±1% 3971 3977 3988 0.16 13 2.6 4

NXRT15WB333JA5Bppp 33k ±5% 4050 ±3% 4101 4108 4131 0.08 13 2.6 4

NXRT15WB473FA5Bppp 47k ±1% 4050 ±1% 4101 4108 4131 0.07 13 2.6 4

NXRT15WF104FA5Bppp 100k ±1% 4250 ±1% 4303 4311 4334 0.05 13 2.6 4

ppp is fulled with Total-length codes. (25 to 45mm interval 5mm, ex. 040=40mm)

Operating Current for Sensor rises Thermistor's temperature by 0.1°C.

Rated Electric Power is necessary electric power that thermistor's temperature rises 5°C by self-heating at 25°C in still air.

Operating Temperature Range: -40°C to +125°C

30

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

7

Page 33: NTC Thermistors Catalog

Temperature Sensor Lead Insulation Type (Radial Type) Specifi cations and Test Methods

2mm length of coating resin from the top of thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire.

12Dielectric Breakdown Voltage

· No damage electrical characteristics on D.C.100V, 1 min.

-40°C +0/-3°C, 30 minutes in air+25°C±2°C, 10 to 15 minutes in air+125°C +3/-0°C, 30 minutes in air+25°C +2/-0°C, 10 to 15 minutes in air (1 cycle)Continuous 100 +4/-0 cycles, without loading.

11Change of Temperature

60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading.

10 Damp Heat

85±2°C in air, with ‘Operating Current for Sensor’ for 1000 +48/-0 hrs.

9High Temperature with Continuous Load

· Resistance (R25°C) fluctuation rate: less than ±2%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

125±2°C in air, for 1000 +48/-0 hours without loading.8 Dry Heat

-40 +0/-3°C in air, for 1000 +48/-0 hours without loading.7 Cold· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

NTC thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, frequency sequence of 10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right angled 3 directions for 2 hours duration each.

6 Vibration

NTC thermistor shall be dropped without any force onto concrete floor from 1 meter height one time.

5 Free Fall

· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.· No visible damage at resin part.

One lead wire is held and 2.5N force is applied. Then the body of NTC thermistor is bent by 90° and again bent back to the initial position. This sequence shall be completed twice. See Fig-3.

Fig-3

4Lead Wire Bending Strength

· Lead wire does not break.

One end of a lead wire shall be fixed and 2.5N force for 10 seconds shall be applied to the other lead wire as shown in Fig-2.

Fig-2

3Lead Wire Breaking Strength

· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wire are dipped into 245±5°C solder <SnAgCu> for 2±0.5 seconds according to Fig-1.

2Solderability (Flow)

· More than 90% of lead wsire surface shall be covered by solder.

Both lead wires are dipped into 350±10°C solder for 3.5±0.5 seconds, or 260 ±5°C solder for 10±1 seconds according to Fig-1. (solder <SnAgCu>)

Fig-1

1Resistance to Soldering Heat (Flow)

· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

No. Test MethodsSpecificationsItem

2.5N

90°

2.5N (10sec.)

Solder

1 to 2mm

31

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

7

Page 34: NTC Thermistors Catalog

Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value)

32

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

44.98133.67125.44419.41714.95511.6199.0977.1785.7074.5683.6822.9862.4372.0001.6511.3701.1430.9580.8070.6820.5800.4950.4240.3650.3150.2730.2370.2070.1810.1600.1410.1240.1100.098

NXRT15XM202

Resistance (kΩ)Temp. (°C)B-ConstantResistance

Part Number

195.652148.171113.34787.55968.23753.65042.50633.89227.21922.02117.92614.67412.08110.0008.3156.9485.8344.9174.1613.5353.0142.5862.2281.9251.6691.4521.2681.1100.9740.8580.7580.6720.5960.531

NXRT15XH103

Resistance (kΩ)337.503243.332177.496130.85997.42873.23055.52942.46732.74725.45019.93215.72712.49810.0008.0546.5295.3244.3663.6012.9852.4882.0831.7521.4801.2561.0700.9160.7870.6790.5880.5120.4460.3910.343

NXRT15XV103

Resistance (kΩ)3500K 3380K 3936K2.0kΩ 10kΩ

168.752121.66688.74865.43048.71436.61527.76421.23316.37412.7259.9667.8646.2495.0004.0273.2642.6622.1831.8011.4931.2441.0410.8760.7400.6280.5350.4580.3940.3400.2940.2560.2230.1950.172

NXRT15XV502

Resistance (kΩ)3936K5.0kΩ 10kΩ

4397.1193088.5992197.2251581.8811151.037846.579628.988471.632357.012272.500209.710162.651127.080100.00079.22263.16750.67740.90433.19527.09122.22418.32315.18412.63510.5668.8737.4816.3375.3844.5943.9343.3802.9162.522

NXRT15WF104

Resistance (kΩ)4250K100kΩ

1227.263874.449630.851460.457339.797253.363190.766144.964111.08785.84266.86152.47041.47133.00026.43021.29817.26614.07611.5389.5067.8706.5495.4754.5953.8743.2822.7892.3792.0381.7511.5091.3061.1340.987

NXRT15WB333

Resistance (kΩ)4050K33kΩ

1747.9201245.428898.485655.802483.954360.850271.697206.463158.214122.25995.22774.73059.06547.00037.64330.33424.59120.04816.43313.53911.2099.3287.7986.5445.5184.6743.9723.3882.9022.4942.1501.8601.6151.406

NXRT15WB473

Resistance (kΩ)4050K47kΩ

Detailed Resistance - Temperature Tables are downloadable from the following URL.

http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

197.388149.395114.34588.38168.91554.16642.88934.19627.44522.16518.01014.72012.09910.0008.3096.9395.8244.9114.1603.5393.0242.5932.2331.9291.6731.4551.2701.1120.9760.8600.7590.6730.5980.532

NXFT15XH103

Resistance (kΩ)Temp. (°C)B-ConstantResistance

Part Number

4221.2802995.0402147.0001554.6001136.690839.019624.987469.678355.975272.011209.489162.559127.057100.00079.22263.16750.67740.90433.19527.09122.22418.32315.18412.63510.5668.8737.4816.3375.3844.5943.9343.3802.9162.522

NXFT15WF104

Resistance (kΩ)3380K 4250K10kΩ

337.503243.332177.496130.85997.42873.23055.52942.46732.74725.45019.93215.72712.49810.0008.0546.5295.3244.3663.6012.9852.4882.0831.7521.4801.2561.0700.9160.7870.6790.5880.5120.4460.3910.343

NXFT15XV103

Resistance (kΩ)3936K10kΩ 100kΩ

1690.5901215.320882.908647.911480.069359.009270.868206.113158.126122.26795.25674.75459.07547.00037.63630.32624.58320.04316.43313.54511.2239.3457.8186.5715.5484.7044.0043.4222.9362.5282.1841.8931.6461.436

NXFT15WB473

Resistance (kΩ)4050K47kΩ

Page 35: NTC Thermistors Catalog

Temperature Sensor Thermo String/Lead Type !Caution/Notice

c !Caution (Storage and Operating Conditions)This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics or cause failures and burn-out.1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)

2. Volatile or fl ammable gas3. Dusty conditions4. Under vacuum, or under high or low pressure5. Wet or humid locations6. Places with salt water, oils, chemical liquids or organic solvents7. Strong vibrations8. Other places where similar hazardous conditions exist

c !Caution (Others)

c Notice (Storage and Operating Conditions)

c Notice (Rating)Use this product within the specifi ed temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.

c Notice (Soldering and Mounting) NXF Series

Continued on the following page.

Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product.

To keep the solderability of the product from degrading, the following storage condition is recommended.1. Storage condition: Temperature -10 to +40°C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by fi rst-in and fi rst-out stocking system.

3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight.

Please note as shown below when you mount this product.1. Do not melt the solder in the resin head when you solder this product. If you do so, there is a possibility of wire breakage, electric short mode failure and wire coating breakage. If you cut the lead wire of this product less than 20mm from the resin head, the heat of the melted solder at the lead wire edge is propagated easily to the resin head along the lead wire.

2. Do not touch the resin head directly with the soldering iron. It may cause the melting of solder in the resin head.3. Do not separate the parallel lead wires 10mm or less from the resin.4. If you mold this product with resin, please evaluate the quality of this product before you use it.5. Do not bend the lead wire radius 1mm or more.

33

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 36: NTC Thermistors Catalog

Temperature Sensor Thermo String/Lead Type !Caution/Notice

Continued from the preceding page.

c Notice (Soldering and Mounting) NXR Series

c Notice (Soldering and Mounting) NXR Series (Insulation Type)

c Notice (Handling) NXF/NXR Series1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping.2. Do not apply excessive force to the lead. Otherwise, it may cause the junction between lead and element to break or crack. Holding the element by the side lead wire is recommended when lead wire is bent or cut.

c Notice (Handling) NXR Series (Insulation Type)1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping. Especially under high-temperature environment, there is a possibility that epoxy resin will become soft. When you set up the processing environment, please examine the processing method after evaluating the quality of this product.

2. Do not apply excessive force to the lead. Otherwise, it may cause the junction between lead and element to break or crack. Holding the element by the side lead wire is recommended when lead wire is bent or cut. Handle the lead with care; there is a possibility that a crack may go into the polyurethane insulated coat when bending the lead.

34

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Please note as shown below when you mount this product.1. Do not melt the solder in the resin head, when you solder this product. If you melt the solder in resin the head, the wire could break and short. If you cut the lead wire of this product less than 8mm from the resin head, the heat of the melted solder at the lead wire edge is propagated easily to the resin head along the lead wire. Please do not cut this product below 9mm.

2. Do not touch the resin head directly with the solder iron. It may cause the melting of solder in the resin head.3. If you mold this product with resin, please evaluate the quality of this product before you use it.

Please note as shown below when you mount this product.1. Do not melt the solder in the resin head when you solder this product. (more than 25mm in full length of the product). If you melt the solder in the resin head, it has posibility that the wire could break and short.2. Do not touch the resin head directly with the solder iron. It may cause the melting of solder in the resin head.3. When additonal processing is carried out on this product (such as bonding, resin molding, and resin coating, etc.), please perform an audit of quality level on an automated machine and only use the product after confi rming its reliability.

Please talk to us if you have concern matter, like process it under the high temperature and the high pressure. (For example, exposed to high-temperature and high-pressure environment as mold sealing with injection molding.)

Page 37: NTC Thermistors Catalog

Temperature Sensor Thermo String/Lead Type Package

Minimum Order Quantity

Part Number

Bulk

Minimum Quantity (pcs.)

-1,000

2,500500

Part Number

Ammo Pack Taping

Minimum Quantity (pcs.)

NXFT

NXRT

-

NXRT_3A016

P

L3

W3

W1

W0

W2

H0

H3

D

ød

ΔS T

Δh2Δh1

I

t1

P1

P2

F

øD0P0 t2

Item

Pitch of Component

Pitch of Sprocket Hole

Lead Spacing

Length from Hole Center to Component Center

Length from Hole Center to Lead

Body Diameter

Deviation Along Tape, Left or Right

Carrier Tape Width

Position of Sprocket Hole

Lead Distance between Reference and Bottom Planes

Height of Component

Protrusion Length

Diameter of Sprocket Hole

Lead Diameter

Total Tape Thickness

Total Thickness, Tape and Lead Wire

Deviation Across Tape

Portion to Cut in Case of Defect

Hold down Tape Width

Hold down Tape Position

Thickness

P

P0

F

P2

P1

D

S

W3

W1

H0

H3

l

øD0

ød

t1

t2

h1, h2

L3

W0

W2

T

12.7±1.0

12.7±0.3

5.0±1.0

6.35±1.3

3.85±0.7

4.0 max.

0±2.0

18.0±0.5

9.0±0.5

16.0±1.0

7.5±1.0

W0.5 to Y1.0

4.0±0.1

0.40±0.05

0.6±0.3

1.6 max.

1.0 max.

11.0

9.5 min.

1.5±1.5

2.0 max.

Dimensions (mm)Code

+0–2.0

c Taping Dimensions (NXRT_3A016 Series)

35

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Page 38: NTC Thermistors Catalog

NTC ThermistorsInrush Current Suppression Lead Type

Coating Extensionon Lead : to line A

10.0

max

.3.

5±1.

0

NTPAN : 23.0 max.NTPAJ : 20.0 max. 5.5 max.

10.0±1.5

ø0.8±0.05Sn plated Cu wire

A

(in mm)

NTPAN/NTPAJ Series

Coating Extensionon Lead : to line A

10.0

max

.3.

5±1.

0

NTPAD : 16.0 max.NTPAA : 12.0 max.

5.5 max.5.0 max.

7.5±1.5

ø0.8±0.05Sn plated Cu wire

A

(in mm)

NTPAD/NTPAA Series

Coating Extensionon Lead: to line A

6.0

max

.3.

5±1.

0

NTPA9: 11.0 max.NTPA7: 9.0 max.NTPA6: 7.5 max.NTPA5: 6.0 max. 5.0 max.

5.0±1.5

ø0.6±0.05Sn plated Cu wire

A

(in mm)

NTPA7/NTPA9 Series

Part NumberResistance

(25°C)(ohm)

Permissible Max.Current (25°C)

(A)

Permissible Max.Current (55°C)

(A)

Thermal TimeConstant (25°C)

(s)

Thermal DissipationConstant (25°C)

(mW/°C)

NTPAN3R0LDKB0 3.0 ±15% 5.4 4.7 135 26.8

NTPAN4R0LDKB0 4.0 ±15% 4.7 4.1 130 26.8

NTPAN6R0LDKB0 6.0 ±15% 3.9 3.4 130 26.8

NTPAJ4R0LDKB0 4.0 ±15% 4.0 3.5 125 21.8

NTPAJ6R0LDKB0 6.0 ±15% 3.4 2.9 125 21.8

NTPAJ8R0LDKB0 8.0 ±15% 3.0 2.6 130 21.8

NTPAJ100LDKB0 10.0 ±15% 2.6 2.2 130 21.8

NTPAD3R9LDNB0 3.9 ±15% 3.3 2.9 65 18.2

NTPAD5R1LDNB0 5.1 ±15% 3.0 2.6 85 18.8

NTPAD8R0LDNB0 8.0 ±15% 2.7 2.3 65 18.7

NTPAD160LDNB0 16.0 ±15% 2.0 1.7 100 19.1

NTPAA2R2LDNB0 2.2 ±15% 3.7 3.2 70 13.5

Continued on the following page.

This product effectively supresses surge currents that are generated when switching power regulators are turned on.

c Features1. Lead is not contained in the ceramic element, the terminations, the solder for inner connection and the coating resin.2. Most suitable for power supplies of less than 100W3. Excellent recovery characteristics due to resin coating with excellent heat characteristics4. Highly reliable

c Applications1. Switching power supplies2. CRT monitors 3. Color televisions4. VCR power supplies 5. Other power circuits

36

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

8

Page 39: NTC Thermistors Catalog

Continued from the preceding page.

Part NumberResistance

(25°C)(ohm)

Permissible Max.Current (25°C)

(A)

Permissible Max.Current (55°C)

(A)

Thermal TimeConstant (25°C)

(s)

Thermal DissipationConstant (25°C)

(mW/°C)

NTPAA3R9LDNB0 3.9 ±15% 2.7 2.3 70 13.5

NTPAA5R1LDNB0 5.1 ±15% 2.5 2.2 70 13.5

NTPAA8R2LDNB0 8.2 ±15% 2.0 1.7 70 13.5

NTPAA100LDNB0 10.0 ±15% 1.7 1.5 70 13.5

NTPA94R0LBMB0 4.0 ±15% 2.5 2.2 65 11.6

NTPA95R0LBMB0 5.0 ±15% 2.3 2.0 65 11.6

NTPA98R0LBMB0 8.0 ±15% 1.8 1.6 65 11.6

NTPA9100LBMB0 10.0 ±15% 1.7 1.5 65 11.6

NTPA9160LBMB0 16.0 ±15% 1.4 1.2 65 11.6

NTPA74R0LBMB0 4.0 ±15% 2.3 2.0 40 9.4

NTPA75R0LBMB0 5.0 ±15% 1.9 1.6 40 9.4

NTPA78R0LBMB0 8.0 ±15% 1.7 1.5 40 9.5

NTPA7100LBMB0 10.0 ±15% 1.4 1.2 40 9.5

NTPA7160LBMB0 16.0 ±15% 1.2 1.0 40 9.9

NTPA7220LBMB0 22.0 ±15% 1.0 0.88 40 9.1

NTPA64R0LBMB0 4.0 ±15% 2.3 2.0 30 7.5

NTPA64R7LBMB0 4.7 ±15% 2.1 1.9 30 7.5

NTPA68R0LBMB0 8.0 ±15% 1.7 1.5 30 7.5

NTPA55R0LBMB0 5.0 ±15% 1.7 1.5 20 5.6

NTPA5100LBMB0 10.0 ±15% 1.2 1.1 20 5.6

NTPAD/NTPAA/NTPA9/NTPA7 series are also available on tape. The fi nal alphabet of the part number should be "DNB0=>D6A0", "BNB0 =>B1A0".

Operating Temperature Range: -20°C to +160°C

Part Number

Voltage (AC)

NTPAN 8600μF

NTPAJ 5000μF

NTPAD 2700μF

NTPAA 1400μF

NTPA9 800μF

NTPA74R0700μF

NTPA78R0

NTPA75R0

NTPA7100570μF

NTPA7160400μF

NTPA7220

5972μF

3472μF

1875μF

972μF

556μF

486μF

396μF

278μF

4936μF

2870μF

1550μF

803μF

459μF

402μF

327μF

230μF

1777μF

1033μF

558μF

289μF

165μF

145μF

118μF

83μF

1493μF

868μF

469μF

243μF

139μF

122μF

99μF

69μF

1234μF

717μF

387μF

201μF

115μF

NTPA68R0 560μF 389μF 321μF 116μF 97μF 80μF

NTPA5 346μF 240μF 198μF 71μF 60μF 50μF

100μF

82μF

57μF

NTPA64R0620μF

NTPA64R7431μF 356μF 128μF 108μF 89μF

100Vrms 120Vrms 132Vrms 220Vrms 240Vrms 264Vrms

c Permissible Electrolytic Capacitor

NTC

–t°

+

c Application Circuit

Max

. Cur

rent

Rat

io

1.0

0

0.5

Ambient Temperature (°C)20 40 60 80 100 120 140 160

c Determination of Allowable Current

37

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

8

Page 40: NTC Thermistors Catalog

Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAN3R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAN4R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)c NTPAN6R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAJ4R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAJ6R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAJ8R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAJ100L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAD3R9L Type

Continued on the following page.

38

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

8

Page 41: NTC Thermistors Catalog

Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)

Continued from the preceding page.

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAD5R1L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAD8R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)c NTPAD160L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAA2R2L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAA3R9L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAA5R1L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPAA8R2L Type

0.01

0.1

1

10

0.01 0.1 1 10

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

tem

pera

ture

(°C

)

1

10

100

1000

Resistance RatioThermistor's Temperature

Ta=25°C

Current (A)

c NTPAA100L Type

Continued on the following page.

39

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

8

Page 42: NTC Thermistors Catalog

Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)

Continued from the preceding page.

0.01

0.1

1

10

0.01 0.1 1 10

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

tem

pera

ture

(°C

)

1

10

100

1000

Resistance RatioThermistor's Temperature

Ta=25°C

Current (A)

c NTPA9160L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA74R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA75R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA78R0L Type

Continued on the following page.

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA94R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA95R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)c NTPA98R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA9100L Type

40

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

8

Page 43: NTC Thermistors Catalog

Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)

Continued from the preceding page.

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA64R7L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA68R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA55R0L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA5100L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA7100L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA7160L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)c NTPA7220L Type

0.01 0.1

Current (A)

Ta=25°C

1 10

Resistance RatioThermistor's Temperature (°C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(°C

)

c NTPA64R0L Type

41

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

8

Page 44: NTC Thermistors Catalog

Inrush Current Suppression Lead Type !Caution/Notice

c !Caution (Storage and Operating Conditions)

c !Caution (Others)

c Notice (Storage and Operating Conditions)

c Notice (Rating)Use this product within the specifi ed temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.

c Notice (Soldering and Mounting)

Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product.

To keep the solderability of the product from degrading, the following storage condition is recommended.1. Storage condition: Temperature -10 to +40°C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by fi rst-in and fi rst-out stocking system.

3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight.

1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down.2. Do not touch the body with the soldering iron. The soldering point should be min. 5mm away from the root of the lead wire.

42

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

8

1. This product is designed for Switching Power Supplies with smoothing capacitors. Other applications of this product may result in fi re.2. Use this product within the specifi ed maximum current. Otherwise it may catch fi re in the worst case.3. Use this product with smoothing capacitors within the specifi ed maximum capacitance value. Otherwise it may catch fi re in the worst case.4. This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure).

Do not use under the following conditions because all these factors can deteriorate the product characteristics cause failure and burn-out. (1) Corrosive gas or deoxidizing gas. (Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) Volatile or fl ammable gas (3) Dusty conditions (4) Under high or low pressure (5) Wet or humid conditions (6) Near with salt water, oils, chemical liquids or organic solvents (7) Strong vibrations (8) Other places where similar hazardous conditions exist.

Page 45: NTC Thermistors Catalog

Inrush Current Suppression Lead Type !Caution/Notice

c Notice (Handling)

c Notice (Others)1. This product may allow the passing of higher current than its initial value if it receives inrush current again before it cools down enough to recover its original resistance. Be sure to consider the highest current under actual operating conditions operating temperature.2. The resin coating of this product does not guarantee insulating. Keep an adequate insulating distance from surrounding parts.

43

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

8

1. When this product is operated, the temperature of some areas may be about 160°C. Use proper surrounding parts and material that withstand such temperature. If they are inadequate and kept at high temperature for a long time, they may be deteriorated or may produce harmful gas. Such harmful gas may deteriorate the element of this product.2. This product does not have waterproof construction. Splashed water may cause failure mode such as deterioration of characteristics or current leak. Therefore, do not apply clean by immersing it into water or any solvent.

3. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping to the element.4. Do not apply excessive force to the lead wire. Otherwise, it may cause the junction between lead wire and element to break or crack, or may crack the element. Therefore, fi x the lead wire of the element side when the lead wire is bent or cut.

Page 46: NTC Thermistors Catalog

Inrush Current Suppression Lead Type Package

Part Number

Bulk

Minimum Quantity (pcs.)

-50

-100

400150

750300

1,000300

1,000500

Part Number

Ammo Pack Taping

Minimum Quantity (pcs.)

NTPAN_DKB0

NTPAJ_DKB0

NTPAD_DNB0

NTPAA_DNB0

NTPA9_BMB0

NTPA7_BMB0

-

-

NTPAD_D6A0

NTPAA_D6A0

NTPA9_B1A0

NTPA7_B1A0

1,000500NTPA6_BMB0 NTPA6_B1A0

1,500500NTPA5_BMB0 NTPA5_B1A0

c Minimum Order Quantity

c Taping Dimensions (NTPAD/A_D6A0 Series)

Pitch of Component

Pitch of Sprocket Hole

Lead Spacing

Length from Hole Center to Lead

Length from Hole Center to Component Center

Body Diameter

Deviation Along Tape, Left or Right

Carrier Tape Width

Position of Sprocket Hole

Lead Distance between Reference and Bottom Plane

Height of Component

Protrusion Length

Diameter of Sprocket Hole

Lead Diameter

Total Tape Thickness

Total Thickness, Tape and Lead Wire

Deviation Across Tape

Portion to Cut in Case of Defect

Hold down Tape Width

Hold down Tape Position

Coating Extension on Lead

P

P0

F

P1

P2

D

ΔS

W

W1

H0

H2

I

D0

d

t1

t2

Δh1, Δh2

L

W0

W2

e

30.0

15.0±0.3

7.5±0.5

7.5±1.5

3.75±1.0

(refer to the table below)

Body Thickness T (refer to the table below)

±2.0

18.0±0.5

16.0±0.5

10.0 max.

W0.5 to Y6.0

4.0±0.1

0.8±0.05

0.6±0.3

2.0 max.

2.0 max.

11.5 min.

4.0 max.

to line A

CodeItem Dimensions (mm)

9.0±0.5

11.0+0–2.0

NTPAD

NTPAA

Type D (mm) T (mm)

16.0 max. 5.5 max.

12.0 max. 5.0 max.

W0

W2

W

W1

H0

H2

Δh2Δh1

e

ΔSP2 P

D

P1

P0

F d

l

øD0

L

t2 t1

T

A

Continued on the following page.

44

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

8

Page 47: NTC Thermistors Catalog

Inrush Current Suppression Lead Type Package

Continued from the preceding page.

c Taping Dimensions (NTPA9/7/6/5_B1A0 Series)

Pitch of Component

Pitch of Sprocket Hole

Lead Spacing

Length from Hole Center to Lead

Length from Hole Center to Component Center

Body Diameter

Deviation Along Tape, Left or Right

Carrier Tape Width

Position of Sprocket Hole

Lead Distance between Reference and Bottom Planes

Height of Component

Protrusion Length

Diameter of Sprocket Hole

Lead Diameter

Total Tape Thickness

Total Thickness, Tape and Lead Wire

Deviation Across Tape

Portion to Cut in Case of Defect

Hold down Tape Width

Hold down Tape Position

Coating Extension on Lead

P

P0

F

P1

P2

D

ΔS

W

W1

H0

H2

I

D0

d

t1

t2

Δh1, Δh2

L

W0

W2

e

12.7

12.7±0.3

5.0

6.35±1.3

3.85±0.8

(refer to the table below)

Body Thickness T 5.0 max.

±1.5

18.0±0.5

16.0±1.0

6.0 max.

W0.5 to Y4.0

4.0±0.3

0.6±0.05

0.6±0.3

2.0 max.

1.5 max.

11.0 min.

4.0 max.

to line A

CodeItem Dimensions (mm)

9.0

11.0+0–2.0

+0.8–0.3

+0.5–0.75

W0

W2

W

W1

H0

H2

Δh2Δh1

e

ΔSP2 P

D

A

P1

P0

F d

l

øD0

L

t2 t1

T

Type D (mm)

11.0 max.

9.0 max.

7.5 max.

6.0 max.

NTPA9

NTPA7

NTPA6

NTPA5

45

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

8

Page 48: NTC Thermistors Catalog

Murata Manufacturing Co., Ltd.

www.murata.com

Note1 Export Control

For customers outside Japan:

No Murata products should be used or

sold, through any channels, for use in the

design, development, production, utilization,

maintenance or operation of, or otherwise

contribution to (1) any weapons (Weapons of

Mass Destruction [nuclear, chemical or biological

weapons or missiles] or conventional weapons)

or (2) goods or systems specially designed or

intended for military end-use or utilization by

military end-users.

For customers in Japan:

For products which are controlled items subject

to the “Foreign Exchange and Foreign Trade Law”

of Japan, the export license specifi ed by the law

is required for export.

2 Please contact our sales representatives or

product engineers before using the products in

this catalog for the applications listed below,

which require especially high reliability for the

prevention of defects which might directly

damage a third party’s life, body or property, or

when one of our products is intended for use

in applications other than those specified in

this catalog.

1 Aircraft equipment

2 Aerospace equipment

3 Undersea equipment

4 Power plant equipment

5 Medical equipment

6 Transportation equipment (vehicles, trains,

ships, etc.)

7 Traffi c signal equipment

8 Disaster prevention / crime prevention

equipment

9 Data-processing equipment

10 Application of similar complexity and/or

reliability requirements to the applications

listed above

3 Product specifi cations in this catalog are as of

December 2014. They are subject to change or

our products in it may be discontinued without

advance notice. Please check with our sales

representatives or product engineers before

ordering. If there are any questions, please contact

our sales representatives or product engineers.

4 Please read rating and CAUTION (for storage,

operating, rating, soldering, mounting and

handling) in this catalog to prevent smoking

and/or burning, etc.

5 This catalog has only typical specifi cations.

Therefore, please approve our product

specifi cations or transact the approval sheet

for product specifi cations before ordering.

6 Please note that unless otherwise specifi ed, we

shall assume no responsibility whatsoever for any

confl ict or dispute that may occur in connection

with the eff ect of our and/or a third party’s

intellectual property rights and other related

rights in consideration of your use of our products

and/or information described or contained in our

catalogs. In this connection, no representation

shall be made to the eff ect that any third parties

are authorized to use the rights mentioned above

under licenses without our consent.

7 No ozone depleting substances (ODS) under the

Montreal Protocol are used in our manufacturing

process.

Global LocationsFor details please visit www.murata.com

Cat. No. R44E-16


Top Related