![Page 1: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/1.jpg)
C O N F I G U R A T I O N G U I D E
![Page 2: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/2.jpg)
Copyright @ 2013,
This manual is copyrighted, with all right reserved. Under the copyright
laws, this manual may not, in whole or in part, be copied, photocopied,
reproduced, translated or converted to any electronic medium or
machine readable form without prior written consent of maker.
Note: Due to product improvement programs, specifications and
features are subject to change without prior notice.
P/N: 0145-SIS0071 May 2013
![Page 3: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/3.jpg)
Configuration Guide
![Page 4: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/4.jpg)
Programming with barcodes
The BARCODE PROGRAMMING feature gives the possibility to change scanner settings without any tools or dismounting the scanner from the check stand.
![Page 5: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/5.jpg)
Table of contents Change scanner settings Factory default settings Default message format Programming flow chart 1. General 1.1 Open programming mode or Close programming mode with update 1.2 Close programming mode without update 1.3 Return to factory default settings 1.8 EMEA mode 1.9 Asia mode 1.15 Firmware version 2. Scanner functionality 2.1 Speaker setting 2.1.1 Speaker frequency 2.1.2 Speaker volume 2.2 Sleep mode 2.2.1 Sleep mode off 2.2.2 Sleep mode after 10 minutes (default) 2.2.3 Sleep mode after 30 minutes 2.2.4 Sleep mode after 60 minutes 2.3 Scanner timing
![Page 6: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/6.jpg)
2.3.4 Same code delay 300msec 2.3.7 Same code delay 600msec
3 Communication parameters 3.1 RS232 communication 3.1.4 Baudrate 4800 3.1.5 Baudrate 9600 (default) 3.1.6 Baudrate 19200 3.1.7 Baudrate 38400 3.1.10 Parity none (default) 3.1.11 Parity even 3.1.12 Parity odd 3.1.15 7 data bits 3.1.16 8 data bits (default) 3.1.20 1 stop bit 3.1.21 2 stop bits (default) 3.1.24 RTS/CTS on (full duplex) 3.1.25 RTS/CTS on (half duplex) 3.1.26 RTS/CTS off (default) 3.1.30 RS232 Preset 1 3.1.35 RS232 Preset 6 3.4 Keyboard Wedge communication 3.4.10 International Keyboard (Alt method)
(default) 3.4.11 US keyboard 3.4.13 French keyboard
![Page 7: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/7.jpg)
3.4.14 German keyboard 3.4.15 Japanese keyboard 3.4.35 Inter character delay 0msec 3.4.37 Inter character delay 2msec (default) 3.4.38 Inter character delay 5msec 3.4.39 Inter character delay 10msec 3.5 USB communication 3.5.1 USB keyboard emulation (default) 3.5.2 USB IBM fixed POS scanner 3.5.3 USB IBM handheld scanner emulation 3.5.4 USB Comport emulation 4. Decoding parameters 4.1 Decoder selection 4.1.1 EAN/UPC on + Add-On Off (default) 4.1.2 EAN/UPC off + Add-On Off 4.1.3 EAN/UPC on + Add-On On 4.1.5 EAN/UPC on + Add-On mandatory On
(for 378/379/414/419/434/439/529/977) 4.1.20 Code 128/EAN 128 On 4.1.21 Code 128/EAN 128 Off 4.1.25 Code 39 On 4.1.26 Code 39 full ASCII On 4.1.27 Code 32 on 4.1.28 Code 39/Code32 Off 4.1.30 Codabar On 4.1.31 Codabar Off
![Page 8: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/8.jpg)
4.1.35 Interleaved 2/5 On 4.1.36 Interleaved 2/5 Off 4.1.39 MSI Plessey On 4.1.40 MSI Plessey Off 4.1.41 Code 93 On 4.1.42 Code 93 Off 4.1.43 ISBN On 4.1.44 ISBN Off 4.1.45 ISSN On 4.1.46 ISSN Off 4.1.47 GS1 Databar On 4.1.48 GS1 Databar Off 4.1.49 GS1 Databar Expanded On 4.1.50 GS1 Databar Expanded Off 4.1.51 GS1 Databar Limited On 4.1.52 GS1 Databar Limited Off 4.2 Decoder configuration 4.2.1 Set min. length Code 128 4.2.2 Set min. length Code 39 4.2.3 Set min. length Codabar(NW-7) 4.2.4 Set min. length Interleaved 2/5 4.2.32 Set min. length MSI Plessey 4.2.33 Set min. length Code93 4.2.15 Length = 3 4.2.16 Length = 4 4.2.17 Length = 5 4.2.18 Length = 6
![Page 9: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/9.jpg)
4.2.19 Length = 7 4.2.20 Length = 8 4.2.21 Length = 9 4.2.22 Length = 10 4.2.23 Length = 11 4.2.24 Length = 12 4.2.25 Length = 13 4.2.26 Length = 14 4.2.27 Length = 15 4.2.28 Length = 16 4.4 Japanese book code 4.4.1 Disable 978/192 Japanese book code 4.4.2 Enable 978/192 Japanese book code 4.4.5 Enable Japanese book code separator 4.4.6 Disable Japanese book code separator 4.4.7 Open programming Japanese book code
separator (one character) 5. Data formatting 5.1 Preambles 5.1.1 Free programmable preambles:
Open programming mode/close Programming without update
5.1.2 Free programmable preambles: Close programming mode with update
5.2 Postambles
![Page 10: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/10.jpg)
5.2.1 Predefined postamble = CR 5.2.2 Predefined postamble = LF 5.2.3 Predefined postamble = CR + LF 5.2.5 Free programmable postambles:
Open programming mode/close Programming mode without update
5.2.6 Programmable postambles: Close programming mode with update
5.3 Code identifiers 5.3.1 Set message format with code identifiers 5.3.2 Set message format without code
identifiers 5.3.3 Default code identifier 5.3.4 Datalogic code identifier 5.3.10 Setting identifier EAN13 5.3.11 Setting identifier EAN8 5.3.12 Setting identifier UPCA 5.3.13 Setting identifier UPCE 5.3.14 Setting identifier EAN 128 5.3.15 Setting identifier Code 128 5.3.16 Setting identifier Code 39 5.3.17 Setting identifier Code 32 5.3.18 Setting identifier Codabar 5.3.19 Setting identifier Interleaved 2/5 5.3.27 Setting identifier MSI/Plessey 5.3.28 Setting identifier Code 93
![Page 11: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/11.jpg)
5.3.20 Exit programming free programmable identifier with update
5.3.21 Exit programming free programmable identifier without update
5.4 Code representation 5.4.3 UPCA format transmitted as UPCA (12
digits) 5.4.4 UPCA format transmitted as EAN13 (with
leading zero) 5.4.5 UPCE format UPCE to UPCA expansion On 5.4.6 UPCE format UPCE to UPCA expansion Off 5.4.7 UPCE format with leading zero 5.4.8 UPCE without leading zero 5.4.9 UPCE with check digit 5.4.10 UPCE without check digit 5.4.15 EAN128 code identifier ]C1: On 5.4.16 EAN128 code identifier ]C1: Off 5.4.24 Transmit EAN8 checkdigit On 5.4.25 Transmit EAN8 checkdigit Off 5.4.26 Transmit EAN13 checkdigit On 5.4.27 Transmit EAN13 checkdigit Off 5.4.28 Transmit UPCA checkdigit On 5.4.29 Transmit UPCA checkdigit Off 5.4.30 Expand EAN8 to UPCA On 5.4.31 Expand EAN8 to UPCA Off 5.4.32 Transmit first digit UPCA Off 5.4.33 Transmit first digit UPCA On
![Page 12: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/12.jpg)
5.4.34 Transmission of the check character at Cod39 Off
5.4.35 Transmission of the check character at Code39 On
5.4.36 Verification of the check character at Code39 Off
5.4.37 Verification of the check character at Code39 On
5.4.38 Transmission of the check character at Codabar Off
5.4.39 Transmission of the check character at Codabar On
5.4.40 Verification of the check character at Codabar Off
5.4.41 Verification of the check character at Codabar On
5.4.42 Transmission of the check character at Interleaved 2/5 Off
5.4.43 Transmission of the check character at Interleaved 2/5 On
5.4.44 Verification of the check digit at Interleaved 2/5 Off
5.4.45 Verification of the check digit at Interleaved 2/5 On
5.4.46 Verification MSI/Plessey check digit Off 5.4.51 Transmission check digit MSI/Plessey Off 5.4.54 Transmission of the check digit at ISBN Off 5.4.55 Transmission of the check digit at ISBN On
![Page 13: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/13.jpg)
5.8.22 Do not transmit start/stop at Code39 5.8.23 Transmit start/stop at Code39 5.8.24 Do not transmit start/stop Codabar Appendices A. Predefined ASCII Characters 10.1.1 SOH 10.1.2 STX 10.1.3 ETX 10.1.4 EOT B. Special keys 6.1.30 TAB 6.1.31 Enter (Alphanumeric) 6.1.32 Enter (Numeric) C. ASCII codes
(Refer to ASCII Code Table)
![Page 14: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/14.jpg)
Change Scanner Settings
In order to change the scanner settings please follow the sequence below:
1. OPEN the scanner Programming Mode by scanning code 1.1.
2. CHANGE SCANNER SETTINGS by scanning any of the codes 2.1.x to 10.x.x.
3. CLOSE the scanner Programming Mode by scanning code 1.1.
Reading the OPEN/CLOSE code 1.1 gives a double tone beep (Low High). An example: For changing the baudrate to 4800 the following codes must be scanned successively: 1.1 � 3.1.4 � 1.1
![Page 15: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/15.jpg)
After reading a valid barcode in Programming mode the scanner will give a High beep.
The scanner will generate a Low beep after receiving an unexpected code. Reading a code, for example a predefined ASCII character, directly after entering the Programming Mode, is not allowed and the scanner will not accept this data.
At any moment (in Programming Mode) you can scan code 1.2 to close the programming mode without update, or code 1.3 to return to default setting.
![Page 16: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/16.jpg)
Factory default settings
SLEEP MODE DEFAULT Sleep mode After 10 minutes RS232 COMMUNICATION DEFAULT Baudrate 9600 Parity None Data bits 8 Stop bits 2 RTS/CTS Off Postamble <CR> KEYBOARD WEDGE COMMUNICATION DEFAULT Terminal type PC/AT Keyboard International (ALT Method) + Inter character delay 2 mSec ++ Postamble Enter (alpha numeric) USB COMMUNCATION DEFAULT Mode USB Keyboard Emulation DECODER SELECTION DEFAULT EAN/UPC On (Add-On Off) Code 128/EAN 128 On Code 39 On Code 32 Off Codabar Off Interleaved 2/5 Off MSI Plessey Off Code 93 Off ISBN Off ISSN Off GS1 DataBar Off GS1 DataBar Expanded Off DECODER CONFIGURATION DEFAULT Min. length Interleaved 2/5 8 CODE IDENTIFIERS DEFAULT Code identifiers Off
Note: + In Asian Mode, it is set at US Keyboard.
++ In Asian Mode, it is set at 0 mSec.
![Page 17: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/17.jpg)
Default message format
CODE MESSAGE FORMAT EAN13 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11D12 D13 EAN8 D1 D2 D3 D4 D5 D6 D7 D8 UPCA D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11D12 UPCE 0 D1 D2 D3 D4 D5 D6 Code 128 D1 - Dx EAN 128 ]C1 D1 - Dx Code 39 D1 - Dx Code 32 D1 - Dx Codabar D1 - Dx Interleaved 2/5 D1 - Dx MSI Plessey D1 - Dx Code 93 D1 - Dx ISBN D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 ISSN D1 D2 D3 D4 D5 D6 D7 D8 GS1 DataBar D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11D12 D13
D14 GS1 DataBar Expanded
D1- D74 (numeric) D1- D42 (alphanumeric)
Important: Please note that EAN/UPC codes with Add-On are transmitted without a separator.
![Page 18: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/18.jpg)
Programming flow chart
CLOSE PROGRAMMING MODE
BY SCANNING CODE 1.1
OPEN PROGRAMMING MODE BY SCANNING CODE 1.1
CHANGE SCANNER SETTINGS BY SCANNING CODE 2.1.x – 10.x.x
CHANGE SCANNER SETTINGS
SAVE AND EXIT
![Page 19: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/19.jpg)
1. General
![Page 20: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/20.jpg)
Configuration Guide General OPEN PROGRAMMING MODE OR
CLOSE PROGRAMMING MODE WITH UPDATE
1.1
![Page 21: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/21.jpg)
Configuration Guide General
CLOSE PROGRAMMING MODE WITHOUT UPDATE
1.2
![Page 22: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/22.jpg)
Configuration Guide General
RETURN TO FACTORY DEFAULT SETTINGS
1.3
Use this code to return to the original factory default setting. Important: Programming Mode is closed after scanning this code.
![Page 23: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/23.jpg)
Configuration Guide General
EMEA MODE
1.8 Note: For European, Middle East and African countries, read the following bar codes to set in EMEA mode.
1.1 ���� 1.8 ���� 1.3
![Page 24: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/24.jpg)
Configuration Guide General
ASIA MODE
1.9 Note: For Asian and other countries (except European, Middle East and African countries), read the following bar codes to set in Asia mode.
1.1 ���� 1.9 ���� 1.3
![Page 25: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/25.jpg)
Configuration Guide General
FIRMWARE VERSION
1.15 Note: Output the firmware version by read the
following bar codes:
1.1 � 1.15 � 1.1
![Page 26: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/26.jpg)
![Page 27: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/27.jpg)
2. Scanner functionality
![Page 28: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/28.jpg)
![Page 29: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/29.jpg)
2.1 Speaker settings
![Page 30: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/30.jpg)
Configuration Guide Speaker settings
SPEAKER FERQUENCY
2.1.1
Note: Repeat reading this bar code to obtain different tone.
SPEAKER VOLUME
2.1.2
Note: Repeat reading this bar code to obtain different volume.
![Page 31: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/31.jpg)
2.2 Sleep mode
![Page 32: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/32.jpg)
Configuration Guide Sleep mode
SLEEP MODE OFF
2.2.1
Note: This setting will reduce the product life time.
![Page 33: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/33.jpg)
Configuration Guide Sleep mode SLEEP MODE AFTER 10 MINUTES (DEFAULT)
2.2.2
SLEEP MODE AFTER 30 MINUTES
2.2.3
![Page 34: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/34.jpg)
Configuration Guide Sleep mode
SLEEP MODE AFTER 60 MINUTES
2.2.4
![Page 35: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/35.jpg)
2.3 Scanner timing
![Page 36: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/36.jpg)
Configuration Guide Scanner timing
SAME CODE DELAY 300MSEC
2.3.4
SAME CODE DELAY 600MSEC
2.3.7
![Page 37: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/37.jpg)
3. Communication
parameters
![Page 38: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/38.jpg)
![Page 39: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/39.jpg)
3.1 RS232 communication
![Page 40: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/40.jpg)
Configuration Guide RS232 communication
BAUDRATE 4800
3.1.4
BAUDRATE 9600 (DEFAULT)
3.1.5
![Page 41: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/41.jpg)
Configuration Guide RS232 communication
BAUDRATE 19200
3.1.6
BAUDRATE 38400
3.1.7
![Page 42: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/42.jpg)
Configuration Guide RS232 communication
PARITY NONE (DEFAULT)
3.1.10
PARITY EVEN
3.1.11
![Page 43: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/43.jpg)
Configuration Guide RS232 communication
PARITY ODD
3.1.12
7 DATABITS
3.1.15
![Page 44: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/44.jpg)
Configuration Guide RS232 communication
8 DATABITS (DEFAULT)
3.1.16
1 STOP BIT
3.1.20
![Page 45: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/45.jpg)
Configuration Guide RS232 communication
2 STOP BITS (DEFAULT)
3.1.21
RTS/CTS ON (Full duplex)
3.1.24
![Page 46: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/46.jpg)
Configuration Guide RS232 communication
RTS/CTS ON (Half duplex)
3.1.25
RTS/CTS OFF (DEFAULT)
3.1.26
![Page 47: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/47.jpg)
Configuration Guide RS232 communication In order to make scanners truly plug and play, a number of pre-set programming bar codes have been developed and implemented into the omni-directional bar code scanner range. Purposely design towards a number of major PoS systems.
No Meaning Code
1 Wincor Nixdorf Beetle Mode A1 3.1.30
6 Fujitsu-ICL Mode 3.1.35
![Page 48: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/48.jpg)
Configuration Guide RS232 communication
RS232 PRESET 1
3.1.30
RS232 PRESET 6
3.1.35
![Page 49: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/49.jpg)
3.4 Keyboard Wedge Communication
![Page 50: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/50.jpg)
Configuration Guide KBW communication
INTERNATIONAL KEYBOARD (ALT METHOD) (DEFAULT)
3.4.10
US KEYBOARD
3.4.11 We recommend US KEYBOARD, in case your system does not accept the default (ALT) KBW communication method.
![Page 51: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/51.jpg)
Configuration Guide KBW communication
FRENCH KEYBOARD
3.4.13
GERMAN KEYBOARD
3.4.14
![Page 52: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/52.jpg)
Configuration Guide KBW communication
JAPANESE KEYBOARD
3.4.15
![Page 53: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/53.jpg)
Configuration Guide KBW communication
INTER CHARACTER DELAY 0MSEC
3.4.35
INTER CHARACTER DELAY 2MSEC(DEFAULT)
3.4.37
![Page 54: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/54.jpg)
Configuration Guide KBW communication
INTER CHARACTER DELAY 5MSEC
3.4.38
INTER CHARACTER DELAY 10MSEC
3.4.39
![Page 55: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/55.jpg)
3.5 USB Communication
![Page 56: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/56.jpg)
Configuration Guide USB communication
3.5 USB SETTINGS
For scanners with integrated USB-interface, you may activate this interface by connecting to appropriate communication cable. Depending on the firmware version of the scanner, various protocol versions may be possible: 1. USB Keyboard Emulation (default) 2. USB IBM fixed POS scanner 3. USB IBM handheld scanner emulation Important: Reset (re-power) the scanner after changing one of the options listed above. When using USB Keyboard Emulation, you can select different keyboard options using the programming codes from Chapter 3.4.
![Page 57: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/57.jpg)
Configuration Guide USB communication
USB KEYBOARD EMULATION (DEFAULT)
3.5.1
USB IBM FIXED POS SCANNER
3.5.2
![Page 58: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/58.jpg)
Configuration Guide USB communication USB IBM HANDHELD SCANNER EMULATION
3.5.3
USB COMPORT EMULATION
3.5.4
![Page 59: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/59.jpg)
4. Decoding parameters
![Page 60: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/60.jpg)
![Page 61: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/61.jpg)
4.1 Decoder selection
![Page 62: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/62.jpg)
Configuration Guide Decoder selection
EAN/UPC ON + ADDON OFF (DEFAULT)
4.1.1
EAN/UPC OFF + ADDON OFF
![Page 63: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/63.jpg)
Configuration Guide Decoder selection
EAN/UPC ON + ADDON ON
4.1.3
Important: Add-On codes are optional. The scanner will accept bar codes with or without Add-On. If the scanner reads an EAN/UPC code without Add-On, the scanner will look for a certain extra time for an Add-On. If this time has elapsed and no Add-On is found, the scanner will just send the EAN/UPC main code.
![Page 64: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/64.jpg)
Configuration Guide Decoder selection
EAN/UPC + ADDON MANDATORY ON (FOR 378/379/414/419/434/439/529/977)
4.1.5
Important: After scanning this code, EAN-13 bar codes starting with 378, 379, 414, 419, 434, 439, 529 or 977 will only be accepted including Add-On. If no Add-On has been found, the bar code will not be accepted. Bar codes starting with different characters are accepted with or without Add-On.
![Page 65: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/65.jpg)
Configuration Guide Decoder selection
CODE 128/EAN 128 ON
4.1.20
CODE 128/EAN 128 OFF
4.1.21
![Page 66: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/66.jpg)
Configuration Guide Decoder selection
CODE 39 ON
4.1.25
CODE 39 FULL ASCII ON
4.1.26
![Page 67: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/67.jpg)
Configuration Guide Decoder selection
CODE 32 ON
4.1.27
CODE 39/CODE 32 OFF
4.1.28
![Page 68: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/68.jpg)
Configuration Guide Decoder selection
CODABAR ON
4.1.30
CODABAR OFF
4.1.31
![Page 69: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/69.jpg)
Configuration Guide Decoder selection
INTERLEAVED 2/5 ON It is mandatory to select a minimum code length
using the appropriate bar code in paragraph 4.2 to prevent short reads.
4.1.35
INTERLEAVED 2/5 OFF
4.1.36
![Page 70: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/70.jpg)
Configuration Guide Decoder selection
MSI PLESSEY ON
4.1.39
MSI PLESSEY OFF Disable mSI
4.1.40
![Page 71: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/71.jpg)
Configuration Guide Decoder selection
CODE 93 ON
enable Code 93
4.1.41
CODE 93 OFF
4.1.42
![Page 72: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/72.jpg)
Configuration Guide Decoder selection
ISBN ON
4.1.43
ISBN OFF
4.1.44
![Page 73: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/73.jpg)
Configuration Guide Decoder selection
ISSN ON
4.1.45
ISSN OFF
4.1.46
![Page 74: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/74.jpg)
Configuration Guide Decoder selection
GS1 DATABAR ON
4.1.47
GS1 DATABAR OFF
8 7 1 2 3 4 5 1 4 2 5 0 6
4.1.48
![Page 75: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/75.jpg)
Configuration Guide Decoder selection
GS1 DATABAR EXPANDED ON
4.1.49
GS1 DATABAR EXPANDED OFF
4.1.50
![Page 76: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/76.jpg)
Configuration Guide Decoder selection
GS1 DATABAR LIMITED ON
4.1.51
GS1 DATABAR LIMITED OFF
4.1.52
![Page 77: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/77.jpg)
4.2 Decoder configuration
![Page 78: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/78.jpg)
Programming flow chart for minimum length of bar code
SET MINIMUM LENGTH
OF BAR CODE
(SCAN CODE 4.2.1~4.2.33)
LENGTH
(SCAN CODE 4.2.15 ~ 4.2.28)
PROGRAMMING MINIMUM
LENGTH OF BAR CODE
SAVE AND EXIT
![Page 79: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/79.jpg)
Configuration Guide Decoder configuration
SET MIN. LENGTH CODE128
SET MIN. LENGTH CODE39
4.2.2
![Page 80: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/80.jpg)
Configuration Guide Decoder configuration
SET MIN. LENGTH CODABAR
SET MIN. LENGTH INTERLEAVED 2/5
4.2.4
![Page 81: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/81.jpg)
Configuration Guide Decoder configuration
SET MIN. LENGTH MSI Plessey
SET MIN. LENGTH CODE93
![Page 82: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/82.jpg)
Configuration Guide Decoder configuration
LENGTH = 3
4.2.15
4.2.15
LENGTH = 4
4.2.16
![Page 83: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/83.jpg)
Configuration Guide Decoder configuration
LENGTH = 5
4.2.16
4.2.17
LENGTH = 6
4.2.18
![Page 84: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/84.jpg)
Configuration Guide Decoder configuration
LENGTH = 7
4.2.19
LENGTH = 8
4.2.20
![Page 85: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/85.jpg)
Configuration Guide Decoder configuration
LENGTH =9
4.2.21
LENGTH = 10
4.2.22
![Page 86: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/86.jpg)
Configuration Guide Decoder configuration
LENGTH = 11
4.2.23
LENGTH = 12
4.2.24
![Page 87: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/87.jpg)
Configuration Guide Decoder configuration
LENGTH =13
4.2.25
LENGTH = 14
4.2.26
![Page 88: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/88.jpg)
Configuration Guide Decoder configuration
LENGTH = 15
4.2.27
LENGTH = 16
4.2.28
![Page 89: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/89.jpg)
4.4 Japanese book code
![Page 90: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/90.jpg)
Configuration Guide Japanese book code
DISABLE 978/192 JAPANESE BOOK CODE(DEFAULT)
4.4.1
ENABLE 978/192 JAPANESE BOOK CODE
4.4.2
![Page 91: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/91.jpg)
Configuration Guide Japanese book code
ENABLE JAPANESE BOOK CODE SEPARATOR (DEFAULT)
4.4.5
DISABLE JAPANESE BOOK CODE SEPARATOR
4.4.6
![Page 92: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/92.jpg)
Configuration Guide Japanese book code
OPEN PROGRAMMING JAPANESE BOOK CODE SEPARATOR (ONE CHARACTER)
4.4.7
Note: Only one separator is available. To set Japanese book code separator, scan:
1.1 � 4.4.7 � ASCII code � 1.1
![Page 93: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/93.jpg)
5. Data formatting
![Page 94: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/94.jpg)
![Page 95: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/95.jpg)
5.1 Preambles
![Page 96: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/96.jpg)
Programming sequence preambles
The scanner can be programmed to output bar code data according to the following format: [PREAMBLE STRING] [BAR CODE DATA] The preamble string is limited to a maximum length of 3 characters. Use the chart on the next page to program the preamble string. Example: To send a <STX> in front of the bar code, scan successively (while in Programming Mode) 5.1.1 Free programmable preambles: Open Programming mode 10.1.2 <STX> 5.1.2 Free programmable preambles: Close programming mode with update As a result, the scanner will give the following bar code data output:
![Page 97: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/97.jpg)
Programming flow chart preambles
PROGRAMMMING PREAMBLE STRING
OPEN PROGRAMMING MODE FREE PROGRAMMABLE
PREAMBLES (SCAN CODE 5.1.1)
SELECT PREAMBLE CHARACTER
(SCAN CODE 10.1.X)
CLOSE PROGRAMMING FREE PROGRAMMABLE PREAMBLES WITHOUT UPDATE (SCAN CODE 5.1.1)
CLOSE PROGRAMMING MODE FREE PROGRAMMABLE PREAMBLES
WITH UPDATE (SCAN CODE 5.1.2)
NUMBER OF PREAMBLE CHARACTERS
= 3 ?
MORE- PREAMBLE CHARACTERS
TO BE PROGRAMMED?
SAVE PROGRAMMED DATA?
SAVE AND EXIT
SAVE AND EXIT EXIT
YES
YES
YES
NO
NO
NO
![Page 98: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/98.jpg)
Configuration Guide Preambles
FREE PROGRAMMABLE PREAMBLES: OPEN PROGRAMMING MODE / CLOSE
PROGRAMMING MODE WITHOUT UPDATE
5.1.1
FREE PROGRAMMABLE PREAMBLES: CLOSE PROGRAMMING MODE WITH UPDATE
5.1.2
![Page 99: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/99.jpg)
5.2 Postambles
![Page 100: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/100.jpg)
Programming sequence postambles
The scanner can be programmed to output bar code data according to the following format: [BAR CODE DATA] [POSTAMBLE STRING] The postamble string is limited to a maximum length of 3 characters. Use the chart on the next page to program the postamble string. Example: To send a <ETX> after of the bar code, scan successively (while in Programming Mode) 5.2.5 Free programmable postambles: Open Programming mode 10.1.3 <ETX> 5.2.6 Free programmable postambles: Close programming mode with update As a result, the scanner will give the following bar code data output:
![Page 101: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/101.jpg)
Programming flow chart postambles
PROGRAMMMING POSTAMBLE STRING
OPEN PROGRAMMING MODE FREE PROGRAMMABLE
POSTAMBLES (SCAN CODE 5.2.5)
SELECT POSTAMBLE CHARACTER
(SCAN CODE 10.1.X)
CLOSE PROGRAMMING FREE PROGRAMMABLE POSTAMBLES WITHOUT UPDATE (SCAN CODE 5.2.5)
CLOSE PROGRAMMING MODE FREE PROGRAMMABLE POSTAMBLES
WITH UPDATE (SCAN CODE 5.2.6)
NUMBER OF POSTAMBLE CHARACTERS
= 3 ?
MORE- POSTAMBLE CHARACTERS
TO BE PROGRAMMED?
SAVE
PROGRAMMED DATA?
SAVE AND EXIT
SAVE AND EXIT EXIT
YES
YES
YES
NO
NO
NO
![Page 102: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/102.jpg)
ConfigurationGuide Postambles
PREDEFINED POSTAMBLE = CR(DEFAULT)
5.2.1
PREDEFINED POSTAMBLE = LF
5.2.2
![Page 103: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/103.jpg)
ConfigurationGuide Postambles
PREDEFINED POSTAMBLE = CR + LF
5.2.3
![Page 104: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/104.jpg)
ConfigurationGuide Postambles
FREE PROGRAMMABLE POSTAMBLES: OPEN PROGRAMMING MODE / CLOSE
PROGRAMMING MODE WITHOUT UPDATE
5.2.5
FREE PROGRAMMABLE POSTAMBLES: CLOSE PROGRAMMING MODE WITH UPDATE
5.2.6
![Page 105: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/105.jpg)
5.3 Code identifiers
![Page 106: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/106.jpg)
Set message format with code identifiers A code identifier is a data string, giving information to the host system concerning the bar code type that has been read. After scanning code 5.3.1, the scanner is programmed to transmit data according to the following format: CODE CODE
IDENTIFIER MESSAGE FORMAT
EAN13 F D1 - D13 EAN8 FF D1 - D8 UPCA A D1 - D12 UPCE E 0 D1 - D6 Code 128 # D1 - Dx EAN 128 P ]C1 D1 - Dx Code 39 * D1 - Dx Code 32 * D1 - Dx Codabar % D1 - Dx Interleaved 2/5 i D1 - Dx MSI Plessey O D1 - Dx Code 93 L D1 - Dx ISBN F D1 - D10 ISSN F D1 - D8 GS1 DataBar R
U D1 - D14
GS1 DataBar Expanded W D1 - D74 (numeric) or D1 - D42 (alphanumeric)
![Page 107: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/107.jpg)
Important: Please note that the UPCE format will be changed. The scanner will transmit UPCE codes with leading zero and without check digit. To return to default format without code identifiers scan code 5.3.2.
![Page 108: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/108.jpg)
Configuration Guide Code identifiers
SET MESSAGE FORMAT WITH CODE IDENTIFIERS
5.3.1
SET MESSAGE FORMAT WITHOUT CODE IDENTIFIERS
5.3.2
![Page 109: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/109.jpg)
Configuration Guide Code identifiers 2 versions of preset code identifier are available. The comparison between default version and Datalogic version is list below.
Default Datalogic EAN13 F F EAN8 FF FF UPCA A A UPCE E E Code 128 # # EAN128 P null(none) Code 39 * * Code32 * p ITF 25 i I Codabar % % Code 93 L & MSI/PLESSY O @ Databar Omni-directional
U R4 Databar Limted V RL Databar Expanded W RX
Note: Scan code 5.3.4 for Datalogic version.
![Page 110: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/110.jpg)
Configuration Guide Code identifiers
DEFAULT CODE IDENTIFIER
5.3.3
DATALOGIC CODE IDENTIFIER
5.3.4
![Page 111: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/111.jpg)
Programming flow chart for setting code identifier
SET IDENTIFIER
OF BAR CODE
(SCAN CODE 5.3.10 ~ 5.3.28)
ASCII CODE
(SCAN CODE 10.1.34 ~ 10.1.127)
SAVE AND EXIT
PROGRAMMING
CODE IDENTIFIER
EXIT PROGRAMMING IDENTIFIER
WITH UPDATE
(SCAN CODE 5.3.20)
![Page 112: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/112.jpg)
Configuration Guide Code identifiers
SETTING IDENTIFIER EAN13
SETTING IDENTIFIER EAN8
![Page 113: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/113.jpg)
Configuration Guide Code identifiers
SETTING IDENTIFIER UPCA
SETTING IDENTIFIER UPCE
![Page 114: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/114.jpg)
Configuration Guide Code identifiers
SETTING IDENTIFIER EAN128
SETTING IDENTIFIER CODE128
![Page 115: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/115.jpg)
Configuration Guide Code identifiers
SETTING IDENTIFIER CODE39
SETTING IDENTIFIER CODE32
![Page 116: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/116.jpg)
Configuration Guide Code identifiers
SETTING IDENTIFIER CODABAR
SETTING IDENTIFIER INTERLEAVED 2/5
![Page 117: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/117.jpg)
Configuration Guide Code identifiers
SETTING IDENTIFIER MSI/PLESEY
SETTING IDENTIFIER CODE93
![Page 118: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/118.jpg)
Configuration Guide Code identifiers EXIT PROGRAMMING FREE PROGRAMMABLE
IDENTIFIER WITH UPDATE
EXIT PROGRAMMING FREE PROGRAMMABLE
IDENTIFIER WITHOUT UPDATE
![Page 119: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/119.jpg)
5.4 Code representation
![Page 120: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/120.jpg)
Configuration Guide Code representation
UPCA FORMAT TRANSMITTED AS UPCA(12 DIGITS)
UPCA FORMAT TRANSMITTED AS EAN13(WITH LEADING ZERO)
![Page 121: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/121.jpg)
Configuration Guide Code representation
UPCE FORMAT UPCE TO UPCA EXPANSION ON
UPCE FORMAT UPCE TO UPCA EXPANSION OFF
![Page 122: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/122.jpg)
Configuration Guide Code representation
UPCE FORMAT WITH LEADING ZERO
5.4.7
UPCE FORMAT WITHOUT LEADING ZERO
5.4.8
![Page 123: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/123.jpg)
Configuration Guide Code representation
UPCE FORMAT WITH CHECK DIGIT
5.4.9
UPCE FORMAT WITHOUT CHECK DIGIT
5.4.10
![Page 124: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/124.jpg)
Configuration Guide Code representation
EAN 128 CODE INDENTIFIER ]C1 ON
5.4.15
EAN 128 CODE INDENTIFIER ]C1 OFF
5.4.16
![Page 125: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/125.jpg)
Configuration Guide Code representation
TRANSMIT EAN8 CHECKDIGIT ON
TRANSMIT EAN8 CHECKDIGIT OFF
![Page 126: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/126.jpg)
Configuration Guide Code representation
TRANSMIT EAN13 CHECKDIGIT ON
TRANSMIT EAN13 CHECKDIGIT OFF
![Page 127: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/127.jpg)
Configuration Guide Code representation
TRANSMIT UPCA CHECKDIGIT ON
TRANSMIT UPCA CHECKDIGIT OFF
![Page 128: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/128.jpg)
Configuration Guide Code representation
EXPAND EAN8 TO UPCA ON
EXPAND EAN8 TO UPCA OFF
![Page 129: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/129.jpg)
Configuration Guide Code representation
TRANSMIT FIRST DIGIT UPCA OFF
TRANSMIT FIRST DIGIT UPCA ON
![Page 130: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/130.jpg)
Configuration Guide Code representation
TRANSMISSION OF THE CHECK CHARACTER AT CODE39 OFF
TRANSMISSION OF THE CHECK CHARACTER
AT CODE39 ON
![Page 131: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/131.jpg)
Configuration Guide Code representation VERIFICATION OF THE CHECK CHARACTER AT
CODE 39 OFF
VERIFICATION OF THE CHECK CHARACTER AT
CODE 39 ON
![Page 132: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/132.jpg)
Configuration Guide Code representation
TRANSMISSION OF THE CHECK CHARACTER AT CODABAR OFF
TRANSMISSION OF THE CHECK CHARACTER
AT CODABAR ON
![Page 133: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/133.jpg)
Configuration Guide Code representation VERIFICATION OF THE CHECK CHARACTER AT
CODABAR OFF
VERIFICATION OF THE CHECK CHARACTER AT
CODABAR ON
![Page 134: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/134.jpg)
Configuration Guide Code representation
TRANSMISSION OF THE CHECK DIGIT AT INTERLEAVED 2/5 OFF
TRANSMISSION OF THE CHECK DIGIT AT INTERLEAVED 2/5 ON
![Page 135: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/135.jpg)
Configuration Guide Code representation
VERIFICATION OF THE CHECK DIGIT AT INTERLEAVED 2/5 OFF
VERIFICATION OF THE CHECK DIGIT AT INTERLEAVED 2/5 ON
![Page 136: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/136.jpg)
Configuration Guide Code representation VERIFICATION MSI/PLESSEY CHECK DIGIT OFF
TRANSMISSION CHECK DIGIT MSI/PLESSEY OFF
![Page 137: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/137.jpg)
Configuration Guide Code representation
TRANSMISSION OF THE CHECK DIGIT AT ISBN OFF
TRANSMISSION OF THE CHECK DIGIT AT ISBN ON
![Page 138: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/138.jpg)
Configuration Guide Code representation DO NOT TRANSMIT START/STOP AT CODE 39
TRANSMIT START/STOP AT CODE 39
![Page 139: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/139.jpg)
Configuration Guide Code representation DO NOT TRANSMIT START/STOP CODABAR
![Page 140: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/140.jpg)
![Page 141: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/141.jpg)
Appendices
![Page 142: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/142.jpg)
![Page 143: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/143.jpg)
A. Predefined ASCII characters
![Page 144: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/144.jpg)
Configuration Guide Predefined ASCII characters
SOH
10.1.1
STX
STX
10.1.2
![Page 145: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/145.jpg)
Configuration Guide Predefined ASCII characters
ETX
10.1.3
EOT
EOT
10.1.4
![Page 146: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/146.jpg)
![Page 147: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/147.jpg)
B. Special keys
![Page 148: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/148.jpg)
Configuration Guide Special Keys On the following pages you find some special key programming bar codes, related to KBW communication. These codes are also applicable in USB interface with USB keyboard emulation.
![Page 149: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/149.jpg)
Configuration Guide Special Keys
TAB
6.1.30
ENTER (ALPHANUMERIC)
6.1.31
![Page 150: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/150.jpg)
Configuration Guide Special keys
ENTER (NUMERIC)
6.1.32
![Page 151: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/151.jpg)
C. ASCII codes
(Refer to ASCII Code Table)
![Page 152: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/152.jpg)
![Page 153: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/153.jpg)
![Page 154: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/154.jpg)
![Page 155: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/155.jpg)
![Page 156: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/156.jpg)
![Page 157: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/157.jpg)
![Page 158: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/158.jpg)
![Page 159: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/159.jpg)
![Page 160: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/160.jpg)
![Page 161: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/161.jpg)
![Page 162: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/162.jpg)
![Page 163: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/163.jpg)
![Page 164: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/164.jpg)
![Page 165: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/165.jpg)
![Page 166: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/166.jpg)
![Page 167: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/167.jpg)
![Page 168: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/168.jpg)
![Page 169: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/169.jpg)
![Page 170: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/170.jpg)
![Page 171: Omni scanner Configuration Guide -PM(NoBrand)-0145-SIS0071](https://reader030.vdocuments.net/reader030/viewer/2022012020/616890c7d394e9041f70a768/html5/thumbnails/171.jpg)