Transcript
  • 4x2 Fire Chassis14,000kg GVW

    1329F

    dimensions (mm)A Wheelbase 3860 4160C Rear overhang 2085 2285D Overall length 7385 7885E Frame height at front axle (unladen) 907 907

    Frame height at rear axle (steel susp. unladen) 940 940G Back of cab to end of frame 5735 6235H Bumper to back of cab 1650 1650I Cab rear to front axle (day cab) 210 210

    Ground clearance front 216 216Ground clearance rear 183 183Frame width (at rear) 852 852Turning circle (wall to wall) m 14.9 15.8

    weights (kg)Wheelbase 3860 4160

    Kerb Weights (Steel Suspension)Front axle 3166 3167Rear axle 1496 1515Total 4662 4682Body/Payload 9338 9318

    Plated WeightsGVW 14000 14000Front axle 5600 5600Rear axle 10400 10400

    Weights and dimensions are to standard specification with 20 litres of fuel, 5 litres of AdBlue, oil, water, tools and front underride guard.Kerb weights are subject to a manufacturing tolerance of ±2%.

    The right is reserved to alter specification or equipment without notice.

    cabStandard cab Day (S)Mounting 4 pointTilting HydraulicDashboard DistributionWindows in rear wall OptionalNets on rear wall OptionalSwitch and wiringfor body interior light Standard

    (see separate Atego Cab Sheet CV 528 for full details)

    Driver seat Non-suspendedPassenger seat Non-suspendedCentre seat OptionalParking brake control On console beside driver seatVentilation air filter Pollen filter

    The contents of this brochure are not bindingand the right is reserved to make modifications

    without notice.

    Issued by: Mercedes-Benz UK Ltd.,Tongwell, Milton Keynes, MK15 8BA. Telephone: (01908) 245000. Fax: (01908) 245093www.mercedes-benz.co.uk

    CV 513 DECEMBER 11

    optionsChassisLockable fuel cap

    DrivelineG85–6 speed manual gearboxTelligent AutoTrans (only with G85 gearbox)Differential lockVarious PTOs

    BrakesHeated brake air dryer

    CabDeletion of cab rear wallAir conditioningDriver’s airbagAir suspension seatsCentre seat with seat beltHeated windscreenTinted glassAdditional sockets in cabExternal sun visor – transparentLong ‘L’ cab pre-prepared for crew cab construction

    Engine165Ah batteries100 amp alternator

    ElectricsHeadlamp washersAudible reverse warning

    special Custom Tailored Trucks (CTT) optionsFour man steel crewcab extensionRear air suspension on 4160mm wheelbase

  • 1329F

    engine1329F

    Type Mercedes-Benz OM906LA6.37 litre turbo-intercooled6 cylinder direct injection diesel

    Max. power 210kW @ 2200 rpm 286PS

    Max. torque 1120Nm @ 1200 - 1600 rpm 826lbft

    Bore 102mm

    Stroke 130mm

    Capacity 6.37 litres

    Control Electronic engine management

    Fuel Injection Direct injection via unit injectors

    Cooling Water cooled with viscous fanEngine pre-heat system

    Exhaust Stainless steel with SCR catalytic converter under chassis

    Engine brake Constant throttle with butterfly

    Performance Curves

    transmissionGearbox & RatiosType Allison automatic

    WT-3000PR (5-speed)with integral retarder

    and push button control

    1st 3.492nd 1.863rd 1.414th 1.005th 0.75Reverse 5.03

    AxlesFront - type Mercedes-Benz drop centre ‘l’ beam

    - capacity 5600kg

    Rear - type Mercedes-Benz hypoid- capacity 10500kg

    Rear Axle Ratios & PerformanceGross Vehicle Weight (kg) 14000Standard Axle Ratio 4.300:1Geared speed (mph) 79Gradeability 1st gear rolling 37%

    Power Take OffEngine front PTOPTO interlockControl system for PTOChoice of PTO for Allison gearbox

    Wheels & TyresWheels 7.50 x 19.5Tyres 285/70R 19.5Spare Wheel StandardWheel Nut Covers Standard

    chassisBrakesFront/Rear Disc brakes (377mm dia)Service Dual circuit air system

    Self adjustingAir dryer

    Secondary/Parking Progressive spring brake actuatorsto front and rear axles

    Load sensing Rear axleABS StandardASR StandardOther Brake pipe protection

    Front coupling head for air supply

    SuspensionFront axle: Parabolic leaf springs

    Double acting shock absorbersStabiliser

    Rear axle: Parabolic dual rate leaf springsDouble acting shock absorbersStabiliser

    SteeringType Recirculating ball

    Integral power assistanceVariable ratioSteering column lockAdjustable column

    TanksCapacity (litres) Position

    Fuel Tank 130 plastic RHSAdBlue Tank 25 RHS

    Lockable fuel cap

    Electrical Systems (featuring CAN bus technology)Voltage 24 volt, negative earthBattery 2 x 12 volt, 165AhAlternator 28 volt/100 ampCommunications PSM for telematics to ISO 11898

    Protection & FinishPaint Gloss paint finish

    Nova grey chassisSilver wheels

    Underbody Seam and cavity sealingUnderbody sealingPart galvanised panelsPlastic wingsPlastic trim panels

    Entry steps Non-slip metal

    General2 piece ladder frame, high tensile steel

    Channel section sidemembers

    Z section cab mounting frame

    Horizontal exhaust emitting between axles

    Front underride guard

  • 1329F

    engine1329F

    Type Mercedes-Benz OM906LA6.37 litre turbo-intercooled6 cylinder direct injection diesel

    Max. power 210kW @ 2200 rpm 286PS

    Max. torque 1120Nm @ 1200 - 1600 rpm 826lbft

    Bore 102mm

    Stroke 130mm

    Capacity 6.37 litres

    Control Electronic engine management

    Fuel Injection Direct injection via unit injectors

    Cooling Water cooled with viscous fanEngine pre-heat system

    Exhaust Stainless steel with SCR catalytic converter under chassis

    Engine brake Constant throttle with butterfly

    Performance Curves

    transmissionGearbox & RatiosType Allison automatic

    WT-3000PR (5-speed)with integral retarder

    and push button control

    1st 3.492nd 1.863rd 1.414th 1.005th 0.75Reverse 5.03

    AxlesFront - type Mercedes-Benz drop centre ‘l’ beam

    - capacity 5600kg

    Rear - type Mercedes-Benz hypoid- capacity 10500kg

    Rear Axle Ratios & PerformanceGross Vehicle Weight (kg) 14000Standard Axle Ratio 4.300:1Geared speed (mph) 79Gradeability 1st gear rolling 37%

    Power Take OffEngine front PTOPTO interlockControl system for PTOChoice of PTO for Allison gearbox

    Wheels & TyresWheels 7.50 x 19.5Tyres 285/70R 19.5Spare Wheel StandardWheel Nut Covers Standard

    chassisBrakesFront/Rear Disc brakes (377mm dia)Service Dual circuit air system

    Self adjustingAir dryer

    Secondary/Parking Progressive spring brake actuatorsto front and rear axles

    Load sensing Rear axleABS StandardASR StandardOther Brake pipe protection

    Front coupling head for air supply

    SuspensionFront axle: Parabolic leaf springs

    Double acting shock absorbersStabiliser

    Rear axle: Parabolic dual rate leaf springsDouble acting shock absorbersStabiliser

    SteeringType Recirculating ball

    Integral power assistanceVariable ratioSteering column lockAdjustable column

    TanksCapacity (litres) Position

    Fuel Tank 130 plastic RHSAdBlue Tank 25 RHS

    Lockable fuel cap

    Electrical Systems (featuring CAN bus technology)Voltage 24 volt, negative earthBattery 2 x 12 volt, 165AhAlternator 28 volt/100 ampCommunications PSM for telematics to ISO 11898

    Protection & FinishPaint Gloss paint finish

    Nova grey chassisSilver wheels

    Underbody Seam and cavity sealingUnderbody sealingPart galvanised panelsPlastic wingsPlastic trim panels

    Entry steps Non-slip metal

    General2 piece ladder frame, high tensile steel

    Channel section sidemembers

    Z section cab mounting frame

    Horizontal exhaust emitting between axles

    Front underride guard

  • 4x2 Fire Chassis14,000kg GVW

    1329F

    dimensions (mm)A Wheelbase 3860 4160C Rear overhang 2085 2285D Overall length 7385 7885E Frame height at front axle (unladen) 907 907

    Frame height at rear axle (steel susp. unladen) 940 940G Back of cab to end of frame 5735 6235H Bumper to back of cab 1650 1650I Cab rear to front axle (day cab) 210 210

    Ground clearance front 216 216Ground clearance rear 183 183Frame width (at rear) 852 852Turning circle (wall to wall) m 14.9 15.8

    weights (kg)Wheelbase 3860 4160

    Kerb Weights (Steel Suspension)Front axle 3166 3167Rear axle 1496 1515Total 4662 4682Body/Payload 9338 9318

    Plated WeightsGVW 14000 14000Front axle 5600 5600Rear axle 10400 10400

    Weights and dimensions are to standard specification with 20 litres of fuel, 5 litres of AdBlue, oil, water, tools and front underride guard.Kerb weights are subject to a manufacturing tolerance of ±2%.

    The right is reserved to alter specification or equipment without notice.

    cabStandard cab Day (S)Mounting 4 pointTilting HydraulicDashboard DistributionWindows in rear wall OptionalNets on rear wall OptionalSwitch and wiringfor body interior light Standard

    (see separate Atego Cab Sheet CV 528 for full details)

    Driver seat Non-suspendedPassenger seat Non-suspendedCentre seat OptionalParking brake control On console beside driver seatVentilation air filter Pollen filter

    The contents of this brochure are not bindingand the right is reserved to make modifications

    without notice.

    Issued by: Mercedes-Benz UK Ltd.,Tongwell, Milton Keynes, MK15 8BA. Telephone: (01908) 245000. Fax: (01908) 245093www.mercedes-benz.co.uk

    CV 513 DECEMBER 11

    optionsChassisLockable fuel cap

    DrivelineG85–6 speed manual gearboxTelligent AutoTrans (only with G85 gearbox)Differential lockVarious PTOs

    BrakesHeated brake air dryer

    CabDeletion of cab rear wallAir conditioningDriver’s airbagAir suspension seatsCentre seat with seat beltHeated windscreenTinted glassAdditional sockets in cabExternal sun visor – transparentLong ‘L’ cab pre-prepared for crew cab construction

    Engine165Ah batteries100 amp alternator

    ElectricsHeadlamp washersAudible reverse warning

    special Custom Tailored Trucks (CTT) optionsFour man steel crewcab extensionRear air suspension on 4160mm wheelbase


Top Related