OWD24 | 24” INDOOR/OUTDOOR WARMING DRAWER
24” I NDOOR / OU T DOOR WA RM I NG D R AWE R
O W D 2 4
G EN ER AL PRO PERTI E S
FINISH PANEL-READY
TECH N I CAL I N FO R MATI O N
ELECTRICAL REQUIREMENTS 120V/60HZ
TOTAL CONNECTED LOAD 120V/60HZ/15A
TOTAL AMPS 4 AMPS
UTILITY LOCATIONS RIGHT REAR ADJACENT CABINET OR BELOW INSTALLATION AREA
PRO D U C T D I M EN S I O N S
APPLIANCE DIMENSIONS (W X H X D) (IN.) 22 1/2" X 11 7/8” X 20”
CUT OUT DIMENSIONS (W X D) (IN.) 22 5/8” X 20 1/8”
DRAWER CAPACITY 1.33 CU. FT.AVAILABLE MODELS
24” Indoor/Outdoor Warming Drawer, Panel-Ready
◊ Electronic Control Panel.
◊ Four Temperature Levels—Proof, Low, Medium and High(100-200°). Temperature will automatically set to the lasttemperature setting used when the drawer is turned on.
◊ Four Timer Settings—1, 2, 3 & 4 hours plus an infinite timemode which keeps the warming drawer on until you turnit off.
◊ The Infinite mode is very useful when you need thewarming drawer on for extended periods of time likeduring parties and events or for use during the Sabbath.
◊ Blue LED Indicator lights.
FEATURES & BENEFITS
◊ Large Capacity.
◊ 50 pound weight limit.
◊ Quick to heat with 500 watt heating element.
◊ Approved for installation under Dacor wall ovens,microwaves, cooktops and in under counter applications.
OWD24
O P T I O N A L AC C E S S O R I E S
AWFP24SCH Silver Stainless Steel Panel, Chrome
OWD24 | 24” INDOOR/OUTDOOR WARMING DRAWER
CUTO UT D I M EN S I O N S
24” INDOOR/OUTDOOR WARMING DRAWER
I NDOOR/OUTDOOR UN ITS D IMENS IONS
M O D EL A B C
OWD24
- all specifications and information subject to change. please visit www.dacor.com for the most current product details and install information
-Warranty: Limited , parts and labor for one year
INDOOR/OUTDOOR UN ITS D IMENS IONS
M O D EL A B C D CUT O UT M I N .
OWD24 22 5/8” 24" *** 9 1/8” N/A 20 1/8"
HAN D LE D I M EN S I O N S
Chassis
Drawer open F
E
5/16”(8 mm)
BC
Overall Dimensions—IWD/OWD (top view)
40" (101.6 cm)3 prong
120 Vac power cord
Chassis withoutdrawer installed
Mounting hole,9 places
G
D
A
Drawer Face Dimensions—IWD/OWD
Chassis Dimensions—IWD/OWD
D E F G
22 1/2" 22 1/2" 22 1/2" 11 7/8" 20" 18" 11 7/8"
***OWD24 with optional factory front-panel kit only; minimum spacing shown to avoid scraping; gap above and below cutout is 3/4” min. (See ** above for OWD24 withcustom front panel); ****OWD24 cannot be installed above/below/adjacent to any model wall oven or warming drawer.