Pilot devices, 22 mmPushbuttonsSwitchesPilot lightsComponentsSignal Towers K70Signal Beacons KSB
Catalogue 1SFC 261001-EN Edition 5 February 2003Supersedes Catalogue 1SFC 261001-EN Edition 4 December 2000
Pushbuttons, selector switches,toggle switches and pilot lights
Sleeve andtightening nutThe sleeve hasbayonet fit.
Contact blockSingle pole with making orbreaking contact.
Lamp blockIlluminated pushbuttons, selector switches andpilot lights have a lamp block in the centreposition of the holder.
HolderAvailable either for three blocks or five blocksin one single row. Additional blocks can bestacked.
OperatorLenses and handles inseveral colours.Illuminated ornon-illuminated.
Easy to installThe only tool needed is a screwdriver for connecting the wiring.
2. The holder is pushed onto the sleeve and secured with a latch.The contact block/lamp blocks are then snapped on.
1. The operator is to be inserted from the front and secured at theback with a bayonet type sleeve and locking ring.
Legend platesOf plastic or aluminium withslots that guide the legendplate and the operator intothe correct position.
BezelsPushbuttons, selector switches and toggle switcheswith bezel in black plastic, chrome plastic or metalare available.
A complete range of state-ofthe art productsABB Control has a complete range of pushbuttons,selector switches and pilot lights of modern design thatare easy to install.By combining a few basic components a large number ofversions can be built up. They can be ordered in parts(operator + blocks with holder) or installed in an enclosure.
Lenses and lamp caps have a large area, giving dependableoperation. Pushbuttons and pilot lights are easy to tellapart.
Pushbuttons, selector switches and toggle switches areavailable with three different bezels: black plastic, chromeplastic or metal.
The terminals on the contact blocks and lamp blocks areopen. Wiring can be done separately before the blocks aresnapped on the operator and holder or to the enclosurebase.
Pushbuttons, pilot lights and selector switches have an inte-grated spring-loaded tab. Used together with a notchedhole it willl prevent the operator from rotating.
Terminals protected against inadvertant touching. (IP20)
The contact blocks are colour coded for ease of wiring andinspection (NO is green, NC is red). The contacts havesilver tips and are self-cleaning to ensure good conductivityeven after long use.
The lamp blocks can take either filament bulb, neon bulb,buzzer or LED. The bulbs can be changed from the front.
Non-metallic or aluminium enclosures for rear mounting.Front mounting is available.
A wide assortment of accessories including legend plates,bulbs, special blocks and enclosures are available.
The design complies with all major international standards.
2 ABB1SFC 261001-EN, Ed. 5
ABB 671SFC 261001-EN, Ed. 5
AB
B A
utom
atio
n Te
chno
logy
Pro
duct
s A
B/C
ont r
ol, S
E-7
21 6
1 V
äst e
rås,
Sw
eden
, Tel
epho
ne +
46 2
1 32
07
00, T
elef
ax +
46 2
1 12
60
01C
atal
ogue
1S
FC
261
001-
EN
, E
dit
ion
5
Febr
uary
200
3 A
BB
Aut
omat
ion
Tech
nolo
gy P
rodu
cts
AB
Con
t rol
/XM
P
rint e
d in
Feb
ruar
y 20
03/E
dit a
Väs
t ra
Aro
s
ABB 31SFC 261001-EN, Ed. 5
ContentsPilot devices Non-illuminated Illuminated
page page
Pushbuttons, type KP 6 7
Double pushbuttons, type KPD 8 9-10
Key lockable pushbuttons,type KPK 11
Mushroom and emergencystop pushbuttons,type KPM, KPMT, KPMP, KPMK 12 – 14 12, 14
Potentiometers, type KT 15
Selector switches,type K2SS, K3SS 16 – 17 18–19
Key-operated selector switches, 20type K2SSK, K3SSK
Toggle switches, type KTS 21
Pilot lights, type KL and C 22
Buzzers, type KB 22
Signal Towers, type K70 23 – 25
Signal Beacons, type KSB 26
Reset buttons 27
Enclosures and assembled stationsNon-metallic enclosures 28Metallic enclosures 32Assembled stations 34
Accessories Blocks 35Bulbs and LEDs 36-37Legend plates 39
Miscellaneous Order forms 50Technical data 54Dimensions 56Colour selection 64Index of Order Codes 65ABB agencies and representatives 62Explanation of type codes 66
4 ABB1SFC 261001-EN, Ed. 5
Selection Guide
Non-illuminated/maintained
Non-illuminated Illuminated
Non-illuminated Illuminated
Pushbuttons
Double pushbuttons
Selector switches
Mushrooms
Toggle switches
Pilot-lights
Contact block combinations
Contact block combinations
Contact block combinations
Contact block combinations
Lamp block combinations
Contact block/lamp block combinations
Contact block/lamp blockcombinations with safety holder
IlluminatedNon-illuminated/momentary
E-stop
Key-lockablepushbuttons
Contact block combinations
Compact pilot light
ABB 51SFC 261001-EN, Ed. 5
Accessories
Accessories
Accessories
Selection Guide
Text capsLegend platesAccessories
Shackle
Text cap
Forflushbutton
Forextendedbutton
Not together withlegend plateholder
Sealing membrane
Not togetherwith
legend plate.For 30 mm knob with twistrelease only.
Guard
Not togetherwith legendplate holder
Transformers
Panel holesØ 22.5 Ø 30
Holeadaptor
panel1.5 – 4 mm
Legend plates
Legend plates
AccessoriesLegend plates
Accessories
Emergency
S t o p
Legend plates
Sealing membrane
panel1.5 – 6 mm
BuzzersPotentiometersReset buttonsComponents
6 ABB1SFC 261001-EN, Ed. 5
WeightType Order Code kg
Operator with flush button 3)
MomentaryButton colour: Red KP1-10R 1SFA 616 100 R1001 0.016
Green KP1-10G 1SFA 616 100 R1002 0.016Yellow KP1-10Y 1SFA 616 100 R1003 0.016Blue KP1-10L 1SFA 616 100 R1004 0.016White KP1-10W 1SFA 616 100 R1005 0.016Black KP1-10B 1SFA 616 100 R1006 0.016Clear KP1-10C 1SFA 616 100 R1008 0.016
Maintained 1)
Button colour: Red KP2-10R 1SFA 616 101 R1001 0.016Green KP2-10G 1SFA 616 101 R1002 0.016Yellow KP2-10Y 1SFA 616 101 R1003 0.016Blue KP2-10L 1SFA 616 101 R1004 0.016White KP2-10W 1SFA 616 101 R1005 0.016Black KP2-10B 1SFA 616 101 R1006 0.016
Operator with extended button 3)
MomentaryButton colour: Red KP3-10R 1SFA 616 102 R1001 0.016
Green KP3-10G 1SFA 616 102 R1002 0.016Yellow KP3-10Y 1SFA 616 102 R1003 0.016Blue KP3-10L 1SFA 616 102 R1004 0.016White KP3-10W 1SFA 616 102 R1005 0.016Black KP3-10B 1SFA 616 102 R1006 0.016Clear KP3-10C 1SFA 616 102 R1008 0.016
Maintained 1)
Button colour: Red KP4-10R 1SFA 616 103 R1001 0.016Green KP4-10G 1SFA 616 103 R1002 0.016Yellow KP4-10Y 1SFA 616 103 R1003 0.016Blue KP4-10L 1SFA 616 103 R1004 0.016White KP4-10W 1SFA 616 103 R1005 0.016Black KP4-10B 1SFA 616 103 R1006 0.016
Pushbuttons, non-illuminatedBlack plastic bezel
1) No contact block in the centreposition.
3) Pushbuttons with text/symbol onrequest.
Accessories, see p. 35.Dimension drawings, see p. 56.
Note: Both operator andcontact block(s) must beordered to get a completepilot device
WeightBlocks Type Order Code kg
Contact blocks and holder1 NO with holder KCBH-10 1SFA 616 600 R1101 0.0191 NC with holder KCBH-01 1SFA 616 600 R1110 0.0192 NO with holder KCBH-20 1SFA 616 600 R1102 0.0322 NC with holder KCBH-02 1SFA 616 600 R1120 0.0321 NO +1 NC with holder KCBH-11 1SFA 616 600 R1111 0.032
1 NO without holder KCB-10 SK 616 001-A 0.0131 NC without holder KCB-01 SK 616 001-B 0.013
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
Bezel in chrome plastic or metalReplace 1 in the:
Type KPX-1 0XCat. No. 1SFA 616 XXX R 1 XXX
2 for chrome plastic bezel
3 for metal bezel
ABB 71SFC 261001-EN, Ed. 5
Pushbuttons, illuminatedBlack plastic bezel
WeightType Order Code kg
Operator with flush button 3)
Momentary 1)
Button colour: Red KP1-11R 1SFA 616 100 R1101 0.016Green KP1-11G 1SFA 616 100 R1102 0.016Yellow KP1-11Y 1SFA 616 100 R1103 0.016Blue KP1-11L 1SFA 616 100 R1104 0.016White KP1-11W 1SFA 616 100 R1105 0.016Clear KP1-11C 1SFA 616 100 R1108 0.016
Maintained 1)
Button colour: Red KP2-11R 1SFA 616 101 R1101 0.016Green KP2-11G 1SFA 616 101 R1102 0.016Yellow KP2-11Y 1SFA 616 101 R1103 0.016Blue KP2-11L 1SFA 616 101 R1104 0.016White KP2-11W 1SFA 616 101 R1105 0.016Clear KP2-11C 1SFA 616 101 R1108 0.016
Operator with extended button3)
Momentary 1)
Button colour: Red KP3-11R 1SFA 616 102 R1101 0.016Green KP3-11G 1SFA 616 102 R1102 0.016Yellow KP3-11Y 1SFA 616 102 R1103 0.016Blue KP3-11L 1SFA 616 102 R1104 0.016White KP3-11W 1SFA 616 102 R1105 0.016Clear KP3-11C 1SFA 616 102 R1108 0.016
Maintained 1)
Button colour: Red K P4-11R 1SFA 616 103 R1101 0.016Green K P4-11G 1SFA 616 103 R1102 0.016Yellow K P4-11Y 1SFA 616 103 R1103 0.016Blue K P4-11L 1SFA 616 103 R1104 0.016White K P4-11W 1SFA 616 103 R1105 0.016Clear K P4-11C 1SFA 616 103 R1108 0.016
1) No contact block in the centreposition.
2) Lamp block for max. 230 V AC/DC. Bulb not included.For other lamp blocks see p 35.
Accessories, see p. 35.Dimension drawings, see p. 56.
Note: Both operator andcontact block(s) /lamp blockmust be ordered to geta complete pilot device
WeightBlocks Type Order Code kg
Contact blocks, lamp blocks and holder1 NO + 1 LB with holder2) KCBH-101 1SFA 616 600 R1201 0.0341 NC + 1 LB with holder2) KCBH-011 1SFA 616 600 R1210 0.0342 NO + 1 LB with holder2) KCBH-201 1SFA 616 600 R1202 0.0472 NC + 1 LB with holder2) KCBH-021 1SFA 616 600 R1220 0.0471 NO +1 NC + 1 LB with holder2) KCBH-111 1SFA 616 600 R1211 0.047
1 NO without holder KCB-10 SK 616 001-A 0.0131 NC without holder KCB-01 SK 616 001-B 0.013
Lampblock for 2 W, max. 230 V ACand DC bulb, neon bulb or LED KLB-1 SK 616 003-A 0.015
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
3) Pushbuttons with text/symbolon request.
Bezel in chrome plastic or metalReplace 1 in the:
Type KPX-1 0XCat. No. 1SFA 616 XXX R 1 XXX
2 for chrome plastic bezel
3 for metal bezel
8 ABB1SFC 261001-EN, Ed. 5
Double pushbuttons, non-illuminated
Upper button Lower button WeightColour Text Colour Text Type Order Code kg
Operator with flush buttons 1)
Green no text Red no text KPD1-11B 1SFA 616 130 R1106 0.025I O KPD2-11B 1SFA 616 131 R1106 0.025ON OFF KPD3-11B 1SFA 616 132 R1106 0.025START STOP KPD4-11B 1SFA 616 133 R1106 0.025
White no text Black no text KPD5-11B 1SFA 616 134 R1106 0.025I O KPD6-11B 1SFA 616 135 R1106 0.025ON OFF KPD7-11B 1SFA 616 136 R1106 0.025START STOP KPD8-11B 1SFA 616 137 R1106 0.025
Operator with extended lower button 1)
Green no text Red no text KPD12-11B 1SFA 616 141 R1106 0.025I O KPD13-11B 1SFA 616 142 R1106 0.025ON OFF KPD14-11B 1SFA 616 143 R1106 0.025START STOP KPD15-11B 1SFA 616 144 R1106 0.025
White no text Black no text KPD16-11B 1SFA 616 145 R1106 0.025I O KPD17-11B 1SFA 616 146 R1106 0.025ON OFF KPD18-11B 1SFA 616 147 R1106 0.025START STOP KPD19-11B 1SFA 616 148 R1106 0.025
WeightBlocks Type Order Code kg
Contact blocks and holder2 NO with holder KCBH-20 1SFA 616 600 R1102 0.0322 NC with holder KCBH-02 1SFA 616 600 R1120 0.0321 NO +1 NC with holder KCBH-11 1SFA 616 600 R1111 0.032
1 NO without holder KCB-10 SK 616 001-A 0.0131 NC without holder KCB-01 SK 616 001-B 0.013
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
1) No contact block in the centreposition.
Accessories, see p. 35.Dimension drawings, see p. 56.
Lens colour= black
Lens colour= black
Note: Both operator andcontact block(s) must beordered to get a completepilot device
ABB 91SFC 261001-EN, Ed. 5
Double pushbuttons, illuminated
Upper button Lower button WeightColour Text Colour Text Type Order Code kg
Operator with flush buttons 1)
Red lensGreen no text Red no text KPD1-11R 1SFA 616 130 R1101 0.025
I O KPD2-11R 1SFA 616 131 R1101 0.025ON OFF KPD3-11R 1SFA 616 132 R1101 0.025START STOP KPD4-11R 1SFA 616 133 R1101 0.025
White no text Black no text KPD5-11R 1SFA 616 134 R1101 0.025I O KPD6-11R 1SFA 616 135 R1101 0.025ON OFF KPD7-11R 1SFA 616 136 R1101 0.025START STOP KPD8-11R 1SFA 616 137 R1101 0.025
Green lensGreen no text Red no text KPD1-11G 1SFA 616 130 R1102 0.025
I O KPD2-11G 1SFA 616 131 R1102 0.025ON OFF KPD3-11G 1SFA 616 132 R1102 0.025START STOP KPD4-11G 1SFA 616 133 R1102 0.025
White no text Black no text KPD5-11G 1SFA 616 134 R1102 0.025I O KPD6-11G 1SFA 616 135 R1102 0.025ON OFF KPD7-11G 1SFA 616 136 R1102 0.025START STOP KPD8-11G 1SFA 616 137 R1102 0.025
Yellow lensGreen no text Red no text KPD1-11Y 1SFA 616 130 R1103 0.025
I O KPD2-11Y 1SFA 616 131 R1103 0.025ON OFF KPD3-11Y 1SFA 616 132 R1103 0.025START STOP KPD4-11Y 1SFA 616 133 R1103 0.025
White no text Black no text KPD5-11Y 1SFA 616 134 R1103 0.025I O KPD6-11Y 1SFA 616 135 R1103 0.025ON OFF KPD7-11Y 1SFA 616 136 R1103 0.025START STOP KPD8-11Y 1SFA 616 137 R1103 0.025
Clear lensGreen no text Red no text KPD1-11C 1SFA 616 130 R1108 0.025
I O KPD2-11C 1SFA 616 131 R1108 0.025ON OFF KPD3-11C 1SFA 616 132 R1108 0.025START STOP KPD4-11C 1SFA 616 133 R1108 0.025
White no text Black no text KPD5-11C 1SFA 616 134 R1108 0.025I O KPD6-11C 1SFA 616 135 R1108 0.025ON OFF KPD7-11C 1SFA 616 136 R1108 0.025START STOP KPD8-11C 1SFA 616 137 R1108 0.025
Lens colours- red- green- yellow- clear
WeightBlocks Type Order Code kg
Contact blocks, lamp block and holder2 NO + 1 LB with holder 2) KCBH-201 1SFA 616 600 R1202 0.0472 NC + 1 LB with holder 2) KCBH-021 1SFA 616 600 R1220 0.0471 NO +1 NC + 1 LB with holder 2) KCBH-111 1SFA 616 600 R1211 0.047
1 NO without holder KCB-10 SK 616 001-A 0.0131 NC without holder KCB-01 SK 616 001-B 0.013
Lamp block for 2 W, max. 230 V ACand DC bulb, neon bulb or LED KLB-1 SK 616 003-A 0.015
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
1) No contact block in the centreposition.
2) Lamp block for max. 230 V AC/DC. Bulb not included.For other lamp blocks see p 35.
Accessories, see p. 35.Dimension drawings, see p. 56.
Note: Both operator andcontact block(s) /lamp blockmust be ordered to geta complete pilot device
10 ABB1SFC 261001-EN, Ed. 5
Accessories, see p. 35.Dimension drawings, see p. 56.
Lens colours- red- green- yellow- clear
Upper button Lower button WeightColour Text Colour Text Type Order Code kg
Operator with extended lower button buttons 1)
Red lensGreen no text Red no text KPD12-11R 1SFA 616 141 R1101 0.025
I O KPD13-11R 1SFA 616 142 R1101 0.025ON OFF KPD14-11R 1SFA 616 143 R1101 0.025START STOP KPD15-11R 1SFA 616 144 R1101 0.025
White no text Black no text KPD16-11R 1SFA 616 145 R1101 0.025I O KPD17-11R 1SFA 616 146 R1101 0.025ON OFF KPD18-11R 1SFA 616 147 R1101 0.025START STOP KPD19-11R 1SFA 616 148 R1101 0.025
Green lensGreen no text Red no text KPD12-11G 1SFA 616 141 R1102 0.025
I O KPD13-11G 1SFA 616 142 R1102 0.025ON OFF KPD14-11G 1SFA 616 143 R1102 0.025START STOP KPD15-11G 1SFA 616 144 R1102 0.025
White no text Black no text KPD16-11G 1SFA 616 145 R1102 0.025I O KPD17-11G 1SFA 616 146 R1102 0.025ON OFF KPD18-11G 1SFA 616 147 R1102 0.025START STOP KPD19-11G 1SFA 616 148 R1102 0.025
Yellow lensGreen no text Red no text KPD12-11Y 1SFA 616 141 R1103 0.025
I O KPD13-11Y 1SFA 616 142 R1103 0.025ON OFF KPD14-11Y 1SFA 616 143 R1103 0.025START STOP KPD15-11Y 1SFA 616 144 R1103 0.025
White no text Black no text KPD16-11Y 1SFA 616 145 R1103 0.025I O KPD17-11Y 1SFA 616 146 R1103 0.025ON OFF KPD18-11Y 1SFA 616 147 R1103 0.025START STOP KPD19-11Y 1SFA 616 148 R1103 0.025
Clear lensGreen no text Red no text KPD12-11C 1SFA 616 141 R1108 0.025
I O KPD13-11C 1SFA 616 142 R1108 0.025ON OFF KPD14-11C 1SFA 616 143 R1108 0.025START STOP KPD15-11C 1SFA 616 144 R1108 0.025
White no text Black no text KPD16-11C 1SFA 616 145 R1108 0.025I O KPD17-11C 1SFA 616 146 R1108 0.025ON OFF KPD18-11C 1SFA 616 147 R1108 0.025START STOP KPD19-11C 1SFA 616 148 R1108 0.025
WeightBlocks Type Order Code kg
Contact blocks, lamp block and holder2 NO + 1 LB with holder 2) KCBH-201 1SFA 616 600 R1202 0.0472 NC + 1 LB with holder 2) KCBH-021 1SFA 616 600 R1220 0.0471 NO +1 NC + 1 LB with holder 2) KCBH-111 1SFA 616 600 R1211 0.047
1 NO without holder KCB-10 SK 616 001-A 0.0131 NC without holder KCB-02 SK 616 001-B 0.013
Lamp block for 2 W, max. 230 V ACand DC bulb, neon bulb or LED KLB-1 SK 616 003-A 0.015
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
Double pushbuttons, illuminated
1) No contact block in the centreposition.
2) Lamp block for max. 230 V AC/DC. Bulb not included.For other lamp blocks see p 35.
Note: Both operator andcontact block(s) /lamp blockmust be ordered to geta complete pilot device
ABB 111SFC 261001-EN, Ed. 5
WeightType Order Code kg
MaintainedLocks, when depressed, can only be released with the keyKey removable in both locked and unlocked positionRonis 455 (Key code 71) KPK1-101 1SFA 616 110 R1001 0.059Ronis 421 (Key code 72) KPK1-102 1SFA 616 110 R1002 0.059Ronis 3433-E (Key code 73) KPK1-103 1SFA 616 110 R1003 0.059
Momentary
Can be operated without key when unlockedKey removable in both locked and unlocked positionKey-lockable in non-depressed positionRonis 455 (Key code 71) KPK2-101 1SFA 616 111 R1001 0.059Ronis 421 (Key code 72) KPK2-102 1SFA 616 111 R1002 0.059Ronis 3433-E (Key code 73) KPK2-103 1SFA 616 111 R1003 0.059
Key-lockable in depressed positionRonis 455 (Key code 71) KPK3-101 1SFA 616 112 R1001 0.059Ronis 421 (Key code 72) KPK3-102 1SFA 616 112 R1002 0.059Ronis 3433-E (Key code 73) KPK3-103 1SFA 616 112 R1003 0.059
Key-lockable in both non-depressed and depressed positionRonis 455 (Key code 71) KPK4-101 1SFA 616 113 R1001 0.059Ronis 421 (Key code 72) KPK4-102 1SFA 616 113 R1002 0.059
Ronis 3433-E (Key code 73) KPK4-103 1SFA 616 113 R1003 0.059
Can only be operated with the keyKey removable in locked positionKey-lockable in non-depressed positionRonis 455 (Key code 71) KPK5-101 1SFA 616 114 R1001 0.059Ronis 421 (Key code 72) KPK5-102 1SFA 616 114 R1002 0.059Ronis 3433-E (Key code 73) KPK5-103 1SFA 616 114 R1003 0.059
Key-lockable in depressed positionRonis 455 (Key code 71) KPK6-101 1SFA 616 115 R1001 0.059Ronis 421 (Key code 72) KPK6-102 1SFA 616 115 R1002 0.059Ronis 3433-E (Key code 73) KPK6-103 1SFA 616 115 R1003 0.059
Key-lockable in both non-depressed and depressed positionRonis 455 (Key code 71) KPK7-101 1SFA 616 116 R1001 0.059Ronis 421 (Key code 72) KPK7-102 1SFA 616 116 R1002 0.059Ronis 3433-E (Key code 73) KPK7-103 1SFA 616 116 R1003 0.059
Key-lockable pushbuttons
Accessories, see p. 35.Dimension drawings, see p. 56.
Other key codesOn request
The key-lockable pushbuttonsare delivered with two keys.
Note: Both operator andcontact block(s) must beordered to get a completepilot device
WeightBlocks Type Order Code kg
Contact blocks, lamp block and holder1 NO with holder KCBH-10 1SFA 616 600 R1101 0.0191 NC with holder KCBH-01 1SFA 616 600 R1110 0.0192 NO with holder KCBH-20 1SFA 616 600 R1102 0.0322 NC with holder KCBH-02 1SFA 616 600 R1120 0,0321 NO +1 NC with holder KCBH-11 1SFA 616 600 R1111 0.032
1 NO without holder KCB-10 SK 616 001-A 0.0131 NC without holder KCB-01 SK 616 001-B 0.013
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
Bezel in chrome plastic or metalReplace 1 in the:
Type KPKX-1 0XCat. No. 1SFA 616 XXX R 1 XXX
2 for chrome plastic bezel
3 for metal bezel
12 ABB1SFC 261001-EN, Ed. 5
Mushroom pushbuttons, momentaryNon-illuminated and illuminated
Operator Button Weightmaterial colour Type Order Code kg
Non-illuminated operatorsØ 40 mm
Plastic Red KPM1-10R 1SFA 616 124 R1001 0.039Yellow KPM1-10Y 1SFA 616 124 R1003 0.039Black KPM1-10B 1SFA 616 124 R1006 0.039
Ø 60 mmPlastic Red KPM2-10R 1SFA 616 125 R1001 0.039
Yellow KPM2-10Y 1SFA 616 125 R1003 0.039Black KPM2-10B 1SFA 616 125 R1006 0.039
Illuminated operators 1)
Ø 40 mmPlastic Red KPM1-11R 1SFA 616 124 R1101 0.039
Yellow KPM1-11Y 1SFA 616 124 R1103 0.039
Ø 60 mmPlastic Red KPM2-11R 1SFA 616 125 R1101 0.039
Yellow KPM2-11Y 1SFA 616 125 R1103 0.039
Accessories, see p. 35.Dimension drawings, see p. 56.
1) No contact block in the centreposition.
2) Lamp block for max. 230 V AC/DC. Bulb not included.For other lamp blocks see p 29.
Note: Both operator andcontact block(s) /lamp blockmust be ordered to geta complete pilot device
WeightBlocks Type Order Code kg
Contact blocks, lamp block and holder1 NO with holder KCBH-10 1SFA 616 600 R1101 0.0191 NC with holder KCBH-01 1SFA 616 600 R1110 0.0192 NO with holder KCBH-20 1SFA 616 600 R1102 0.0322 NC with holder KCBH-02 1SFA 616 600 R1120 0.0321 NO +1 NC with holder KCBH-11 1SFA 616 600 R1111 0.0321 NO + 1 LB with holder 2) KCBH-101 1SFA 616 600 R1201 0.0191 NC + 1 LB with holder 2) KCBH-011 1SFA 616 600 R1210 0.0192 NO + 1 LB with holder 2) KCBH-201 1SFA 616 600 R1202 0.0472 NC + 1 LB with holder 2) KCBH-021 1SFA 616 600 R1220 0.0471 NO +1 NC + 1 LB with holder 2) KCBH-111 1SFA 616 600 R1211 0.047
1 NO without holder KCB-10 SK 616 001-A 0.0131 NC without holder KCB-01 SK 616 001-B 0.013
1 LB For max 230 V AC/DC bulb, neonbulb or LED KLB-1 SK 616 003-A 0.015
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
Bezel in chrome plastic or metalReplace 1 in the:
Type KPMX-1 XXCat. No. 1SFA 616 XXX R 1 XXX
2 for chrome plastic bezel
3 for metal bezel
ABB 131SFC 261001-EN, Ed. 5
The mushroom pushbutton withkey release is delivered with twokeys.
Operator Button Weightmaterial colour Type Order Code kg
Non-illuminated operatorsOperator Ø 30 mmTwist release
Plastic Red KPMT1-10R 1SFA 616 500 R1001 0.039
Black KPMT1-10B 1SFA 616 500 R1006 0.039
Pull release
Plastic Red KPMP1-10R 1SFA 616 501 R1001 0.039
Black KPMP1-10B 1SFA 616 501 R1006 0.039
Operator Ø 40 mmKey release (key code 71, Ronis 455)
Plastic Red KPMK2-10R 1SFA 616 504 R1001 0.079
Black KPMK2-10B 1SFA 616 504 R1006 0.079
Key release (key code 72, Ronis 421)
Plastic Red KPMP5-10R 1SFA 616 507 R1001 0.079
Mushroom pushbuttonsMaintained.
WeightBlocks Type Order Code kg
Contact blocks with holder1 NO with holder KCBH-10 1SFA 616 600 R1101 0.0191 NC with holder KCBH-01 1SFA 616 600 R1110 0.0192 NO with holder KCBH-20 1SFA 616 600 R1102 0.0322 NC with holder KCBH-02 1SFA 616 600 R1120 0.0321 NO +1 NC with holder KCBH-11 1SFA 616 600 R1111 0.032
1 NO without holder KCB-10 SK 616 001-A 0.0131 NC without holder KCB-01 SK 616 001-B 0.013
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
Accessories, see p. 35.Dimension drawings, see p. 56.
Note: Both operator andcontact block(s) must beordered to get a completepilot device
14 ABB1SFC 261001-EN, Ed. 5
Emergency stop pushbuttonsNon-illuminated and illuminated
Operator Operator Weightfunction material, colour Type Order Code kg
Non-illuminated operatorsØ 40 mm
Twist release Plastic, red KPMT3-10R 1SFA 616 510 R1001 0.041Pull release Plastic, red KPMP3-10R 1SFA 616 511 R1001 0.041
Ø 60 mmTwist release Plastic, red KPMT4-10R 1SFA 616 513 R1001 0.048Pull release Plastic, red KPMP4-10R 1SFA 616 514 R1001 0.048
Illuminated operatorsØ 40 mm
Twist release Plastic, red KPMT3-11R 1SFA 616 510 R1101 0.041Pull release Plastic, red KPMP3-11R 1SFA 616 511 R1101 0.041
Ø 60 mmTwist release Plastic, red KPMT4-11R 1SFA 616 513 R1101 0.048Pull release Plastic, red KPMP4-11R 1SFA 616 514 R1101 0.048
Accessories, see p. 35.Dimension drawings, see p. 56.
Use adapter plate 1SFA 616 920 R 8014 (see page 29) when usingnon-metallic enclosure.
The safety holder below can only be used for the the abovementioned type of Emergency stop pushbuttons.
1) No contact block in the centreposition for the illuminatedoperators.
2) Lamp block for max. 230 V AC/DC. Bulb not included.For other lamp blocks see p 35.
Note: Both operator andcontact block(s) /lamp blockmust be ordered to geta complete pilot device
WeightBlocks Type Order Code kg
Contact blocks and lamp block with safety holderfor emergency stop pushbuttons 1)
1 NO with safety holder KCBHS-10 1SFA 616 605 R1101 0.0211 NC with safety holder KCBHS-01 1SFA 616 605 R1110 0.0212 NO with safety holder KCBHS-20 1SFA 616 605 R1102 0.0322 NC with safety holder KCBHS-02 1SFA 616 605 R1120 0.0321 NO +1 NC with safety holder KCBHS-11 1SFA 616 605 R1111 0.0321 NO +1 LB with safety holder 2) KCBHS-101 1SFA 616 605 R1201 0.0331 NC +1 LB with safety holder 2) KCBHS-011 1SFA 616 605 R1210 0.0332 NO +1 LB with safety holder 2) KCBHS-201 1SFA 616 605 R1202 0.0442 NC +1 LB with safety hoolder 2) KCBHS-021 1SFA 616 605 R1220 0.0441 NO +1 NC +1 LB with safety holder2) KCBHS-111 1SFA 616 605 R1211 0.044
1 NO without safety holder KCB-10 SK 616 001-A 0.0131 NC without safety holder KCB-01 SK 616 001-B 0.0131 LB For max 230 V AC/DC bulb, neonbulb or LED without safety holder KLB-1 SK 616 003-A 0.015Safety holder E-stop KCBHS-00 1SFA 616 605 R1100 0.010
ABB 151SFC 261001-EN, Ed. 5
Potentiometer
WeightBezel Type Order Code kg
Complete potentiometer - with resistor 5 kΩBlack knob with integrated position indication and marking in white.
Black plastic KT-105B 1SFA 616 410 R1056 0.034Chrome plastic KT-205B 1SFA 616 410 R2056 0.034Metal KT-305B 1SFA 616 410 R3056 0.042
Complete potentiometer - with resistor 10 kΩBlack knob with integrated position indication and marking in white.
Black plastic KT-110B 1SFA 616 410 R1106 0.034Chrome plastic KT-210B 1SFA 616 410 R2106 0.034Metal KT-310B 1SFA 616 410 R3106 0.042
Operating knob - without resistorBlack knob with integrated position indication and marking in white.For shaft diameter 6 - 6.35 mm. Min. shaft length 20 mm.
Black plastic KT-1B 1SFA 616 410 R1006 0.023Chrome plastic KT-2B 1SFA 616 410 R2006 0.023Metal KT-3B 1SFA 616 410 R3006 0.031
Suitable legend plates - see page 45.
Resistor dataElement type CermetPower rating 2 WMechanical angle 280°Terminals Solder lugsInsulation voltage 900 VOperatingtemperature -1°C to + 70°C
16 ABB1SFC 261001-EN, Ed. 5
Two-position selector switches, non-illuminatedBlack plastic bezel
Weight
Symbol Handle colour Type Order Code kg
Operator with short handle 1)
MaintainedRed K2SS1-10R 1SFA 616 200 R1001 0.024Black K2SS1-10B 1SFA 616 200 R1006 0.024Grey K2SS1-10U 1SFA 616 200 R1007 0.024
MaintainedRed K2SS2-10R 1SFA 616 201 R1001 0.024Black K2SS2-10B 1SFA 616 201 R1006 0.024Grey K2SS2-10U 1SFA 616 201 R1007 0.024
Momentary, spring return from C to BRed K2SS3-10R 1SFA 616 202 R1001 0.024Black K2SS3-10B 1SFA 616 202 R1006 0.024Grey K2SS3-10U 1SFA 616 202 R1007 0.024
Operator with long handle 1)
MaintainedRed K2SS4-10R 1SFA 616 203 R1001 0.025Black K2SS4-10B 1SFA 616 203 R1006 0.025Grey K2SS4-10U 1SFA 616 203 R1007 0.025
MaintainedRed K2SS5-10R 1SFA 616 204 R1001 0.025Black K2SS5-10B 1SFA 616 204 R1006 0.025Grey K2SS5-10U 1SFA 616 204 R1007 0.025
Momentary, spring return from C to BRed K2SS6-10R 1SFA 616 205 R1001 0.025Black K2SS6-10B 1SFA 616 205 R1006 0.025Grey K2SS6-10U 1SFA 616 205 R1007 0.025
Contact functionsBlock positions as seen fromoperator front.
Handle Left Rightposition block block
A (B) O O
O x x
O = not influenced (normal state)x = influenced (state changed)
1) No contact block in the centreposition.
Accessories, see p. 35.Dimension drawings, see p. 56.
WeightBlocks Type Order Code kg
Contact blocks and holder1 NO with holder KCBH-10 1SFA 616 600 R1101 0.019
1 NC with holder KCBH-01 1SFA 616 600 R1110 0.019
2 NO with holder KCBH-20 1SFA 616 600 R1102 0.032
2 NC with holder KCBH-02 1SFA 616 600 R1120 0.032
1 NO +1 NC with holder KCBH-11 1SFA 616 600 R1111 0.032
1 NO without holder KCB-10 SK 616 001-A 0.013
1 NC without holder KCB-01 SK 616 001-B 0.013
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
Note: Both operator andcontact block(s) must beordered to get a completepilot device
Bezel in chrome plastic ormetalReplace 1 in the:
Type K2SSX-1 0XCat. No. 1SFA 616 XXX R 1 XXX
2 for chrome plastic bezel
3 for metal bezel
ABB 171SFC 261001-EN, Ed. 5
Three-position selector switches, non-illuminatedBlack plastic bezel
WeightSymbol Handle colour Type Order Code kg
Operator with short handle 1)
MaintainedRed K3SS1-10R 1SFA 616 210 R1001 0.024Black K3SS1-10B 1SFA 616 210 R1006 0.024Grey K3SS1-10U 1SFA 616 210 R1007 0.024
Momentary, spring return from A to B and C to BRed K3SS2-10R 1SFA 616 211 R1001 0.024Black K3SS2-10B 1SFA 616 211 R1006 0.024Grey K3SS2-10U 1SFA 616 211 R1007 0.024
Momentary, spring return from C to BRed K3SS3-10R 1SFA 616 212 R1001 0.024Black K3SS3-10B 1SFA 616 212 R1006 0.024Grey K3SS3-10U 1SFA 616 212 R1007 0.024
Momentary, spring return from A to BRed K3SS7-10R 1SFA 616 216 R1001 0.024Black K3SS7-10B 1SFA 616 216 R1006 0.024Grey K3SS7-10U 1SFA 616 216 R1007 0.024
Operator with long handle 1)
MaintainedRed K3SS4-10R 1SFA 616 213 R1001 0.025Black K3SS4-10B 1SFA 616 213 R1006 0.025Grey K3SS4-10U 1SFA 616 213 R1007 0.025
Momentary, spring return from A to B and C to BRed K3SS5-10R 1SFA 616 214 R1001 0.025Black K3SS5-10B 1SFA 616 214 R1006 0.025Grey K3SS5-10U 1SFA 616 214 R1007 0.025
Momentary, spring return from C to BRed K3SS6-10R 1SFA 616 215 R1001 0.025Black K3SS6-10B 1SFA 616 215 R1006 0.025Grey K3SS6-10U 1SFA 616 215 R1007 0.025
Momentary, spring return from A to BRed K3SS8-10R 1SFA 616 217 R1001 0.025Black K3SS8-10B 1SFA 616 217 R1006 0.025Grey K3SS8-10U 1SFA 616 217 R1007 0.025
Contact blocks and holder – see page 16
Contact functionsBlock positions as seen fromoperator front.
Handle Left Rightposition block block
A x O
B O O
C O x
O = not influenced (normal state)x = influenced (state changed)
1) No contact block in the centreposition.
Accessories, see p. 35.Dimension drawings, see p. 56.
Note: Both operator andcontact block(s) must beordered to get a completepilot device
Bezel in chrome plastic ormetalReplace 1 in the:
Type K3SSX-1 0XCat. No. 1SFA 616 XXX R 1 XXX
2 for chrome plastic bezel
3 for metal bezel
18 ABB1SFC 261001-EN, Ed. 5
Two-position selector switches, illuminatedBlack plastic bezel
Weight
Symbol Handle colour Type Order Code kg
Operator with short handle 1)
MaintainedRed K2SS1-11R 1SFA 616 200 R1101 0.024Green K2SS1-11G 1SFA 616 200 R1102 0.024Yellow K2SS1-11Y 1SFA 616 200 R1103 0.024Blue K2SS1-11L 1SFA 616 200 R1104 0.024Clear K2SS1-11C 1SFA 616 200 R1108 0.024
MaintainedRed K2SS2-11R 1SFA 616 201 R1101 0.024Green K2SS2-11G 1SFA 616 201 R1102 0.024Yellow K2SS2-11Y 1SFA 616 201 R1103 0.024Blue K2SS2-11L 1SFA 616 201 R1104 0.024Clear K2SS2-11C 1SFA 616 201 R1108 0.024
Momentary, spring return from C to BRed K2SS3-11R 1SFA 616 202 R1101 0.024Green K2SS3-11G 1SFA 616 202 R1102 0.024Yellow K2SS3-11Y 1SFA 616 202 R1103 0.024Blue K2SS3-11L 1SFA 616 202 R1104 0.024Clear K2SS3-11C 1SFA 616 202 R1108 0.024
Operator with long handle 1)
MaintainedRed K2SS4-11R 1SFA 616 203 R1101 0.025Green K2SS4-11G 1SFA 616 203 R1102 0.025Yellow K2SS4-11Y 1SFA 616 203 R1103 0.025Blue K2SS4-11L 1SFA 616 203 R1104 0.025Clear K2SS4-11C 1SFA 616 203 R1108 0.025
MaintainedRed K 2SS5-11R 1SFA 616 204 R1101 0.025Green K 2SS5-11G 1SFA 616 204 R1102 0.025Yellow K 2SS5-11Y 1SFA 616 204 R1103 0.025Blue K 2SS5-11L 1SFA 616 204 R1104 0.025Clear K 2SS5-11C 1SFA 616 204 R1108 0.025
Momentary, spring return from C to BRed K2SS6-11R 1SFA 616 205 R1101 0.025Green K2SS6-11G 1SFA 616 205 R1102 0.025Yellow K2SS6-11Y 1SFA 616 205 R1103 0.025Blue K2SS6-11L 1SFA 616 205 R1104 0.025Clear K2SS6-11C 1SFA 616 205 R1108 0.025
Contact functionsBlock positions as seen fromoperator front.
Handle Left Rightposition block block
A (B) O O
O x x
O = not influenced (normal state)x = influenced (state changed)
1) No contact block in the centreposition.
Accessories, see p. 35.Dimension drawings, see p. 56.
Blocks Type Order Code Weight, kg
Contact blocks, lamp block and holder1 NO + 1 LB with holder 2) KCBH-101 1SFA 616 600 R1201 0.034
1 NC + 1 LB with holder 2) KCBH-011 1SFA 616 600 R1210 0.034
2 NO + 1 LB with holder 2) KCBH-201 1SFA 616 600 R1202 0.047
2 NC + 1LB with holder 2) KCBH-021 1SFA 616 600 R1220 0.047
1 NO +1 NC + 1 LB with holder 2) KCBH-111 1SFA 616 600 R1211 0.047
1 NO without holder KCB-10 SK 616 001-A 0.013
1 NC without holder KCB-01 SK 616 001-B 0.013Lamp block for 2 W, max230 V ACand DC bulb, neon bulb or LED KLB-1 SK 616 003-A 0.013
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
2) Lamp block for max. 230 V AC/DC.Bulb not included.For other lamp blocks see p. 35
Note: Both operator andcontact block(s) /lamp blockmust be ordered to geta complete pilot device
Bezel in chrome plastic ormetalReplace 1 in the:
Type K2SSX-1 1XCat. No. 1SFA 616 XXX R 1 1XX
2 for chrome plastic bezel
3 for metal bezel
ABB 191SFC 261001-EN, Ed. 5
Three-position selector switches, illuminatedBlack plastic bezel
WeightSymbol Handle colour Type Order Code kg
Operator with short handle 1)
MaintainedRed K3SS1-11R 1SFA 616 210 R1101 0.024Green K3SS1-11G 1SFA 616 210 R1102 0.024Yellow K3SS1-11Y 1SFA 616 210 R1103 0.024Blue K3SS1-11L 1SFA 616 210 R1104 0.024Clear K3SS1-11C 1SFA 616 210 R1108 0.024
Momentary, spring return from A to B and C to BRed K3SS2-11R 1SFA 616 211 R1101 0.024Green K3SS2-11G 1SFA 616 211 R1102 0.024Yellow K3SS2-11Y 1SFA 616 211 R1103 0.024Blue K3SS2-11L 1SFA 616 211 R1104 0.024Clear K3SS2-11C 1SFA 616 211 R1108 0.024
Momentary, spring return from C to BRed K3SS3-11R 1SFA 616 212 R1101 0.024Green K3SS3-11G 1SFA 616 212 R1102 0.024Yellow K3SS3-11Y 1SFA 616 212 R1103 0.024Blue K3SS3-11L 1SFA 616 212 R1104 0.024Clear K3SS3-11C 1SFA 616 212 R1108 0.024
Momentary, spring return from A to BRed K3SS7-11R 1SFA 616 216 R1101 0.024Green K3SS7-11G 1SFA 616 216 R1102 0.024Yellow K3SS7-11Y 1SFA 616 216 R1103 0.024Blue K3SS7-11L 1SFA 616 216 R1104 0.024Clear K3SS7-11C 1SFA 616 216 R1108 0.024
Operator with long handle 1)
MaintainedRed K3SS4-11R 1SFA 616 213 R1101 0.025Green K3SS4-11G 1SFA 616 213 R1102 0.025Yellow K3SS4-11Y 1SFA 616 213 R1103 0.025Blue K3SS4-11L 1SFA 616 213 R1104 0.025Clear K3SS4-11C 1SFA 616 213 R1108 0.025
Momentary, spring return from A to B and C to BRed K 3SS5-11R 1SFA 616 214 R1101 0.025Green K 3SS5-11G 1SFA 616 214 R1102 0.025Yellow K 3SS5-11Y 1SFA 616 214 R1103 0.025Blue K 3SS5-11L 1SFA 616 214 R1104 0.025Clear K 3SS5-11C 1SFA 616 214 R1108 0.025
Momentary, spring return from C to BRed K3SS6-11R 1SFA 616 215 R1101 0.025Green K3SS6-11G 1SFA 616 215 R1102 0.025Yellow K3SS6-11Y 1SFA 616 215 R1103 0.025Blue K3SS6-11L 1SFA 616 215 R1104 0.025Clear K3SS6-11C 1SFA 616 215 R1108 0.025
Momentary, spring return from A to BRed K3SS8-11R 1SFA 616 217 R1101 0.025Green K3SS8-11G 1SFA 616 217 R1102 0.025Yellow K3SS8-11Y 1SFA 616 217 R1103 0.025Blue K3SS8-11L 1SFA 616 217 R1104 0.025Clear K3SS8-11C 1SFA 616 217 R1108 0.025
Contact blocks, lamp block and holder – see page 181) No contact block in the centre
position.Accessories, see p. 35.Dimension drawings, see p. 56.
2) Lamp block for max. 230 V AC/DC.Bulb not included.For other lamp blocks see p. 35
Contact functionsBlock positions as seen fromoperator front.
Handle Left Rightposition block block
A x O
B O O
C O x
O = not influenced (normal state)x = influenced (state changed)
Note: Both operator andcontact block(s) /lamp blockmust be ordered to geta complete pilot device
Bezel in chrome plastic ormetalReplace 1 in the:
Type K3SSX-1 1XCat. No. 1SFA 616 XXX R 1 1XX
2 for chrome plastic bezel
3 for metal bezel
20 ABB1SFC 261001-EN, Ed. 5
Key-operated selector switches
The key can be WeightSymbol removed Type Order Code kg
Operator – two positions 3) 4)
MaintainedIn both positions K2SSK1-10 1) 1SFA 616 280 R100 1) 0.069
MaintainedIn position B only K2SSK2-10 1) 1SFA 616 281 R100 1) 0.069
Momentary, spring return from C to B
In position B only K2SSK3-10 1) 1SFA 616 282 R100 1) 0.069
Operator – three positions 3) 4)
MaintainedIn all positions K3SSK1-10 1) 1SFA 616 283 R100 1) 0.069
MaintainedIn position B only K3SSK2-10 1) 1SFA 616 284 R100 1) 0.069
Momentary, spring return from A to B and C to BIn position B only K3SSK3-10 1) 1SFA 616 285 R100 1) 0.069
Momentary, spring return from C to BIn position A only K3SSK4-10 2) 1SFA 616 286 R100 2) 0.069
Momentary, spring return from C to B
In all positions K3SSK5-10 1) 1SFA 616 287 R100 1) 0.069
Contact functionsTwo positions: see page 18
Three positions: see page 19
WeightBlocks Type Order Code kg
Contact blocks and holder2 NO with holder KCBH-20 1SFA 616 600 R1102 0.032
2 NC with holder KCBH-02 1SFA 616 600 R1120 0.032
1 NO +1 NC with holder KCBH-11 1SFA 616 600 R1111 0.032
1 NO without holder KCB-10 SK 616 001-A 0.013
1 NC without holder KCB-01 SK 616 001-B 0.013
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
3) No contact block in the centreposition.
Accessories, see p. 35.Dimension drawings, see p. 56.
1) Key code codes
Key code Code
71 (standard) = 172 = 273 = 3Other On request
2) Key code codes
Key code Code
71 (standard) = 172 = 2
The key-operated selectorswitches are delivered with twokeys.
Note: Both operator andcontact block(s) must beordered to get a completepilot device
4) To improve antirotation useguide washer 2154 373-2.See page 38.
ABB 211SFC 261001-EN, Ed. 5
WeightBlocks Type Cat.No. kg
Contact blocks and holder
1 NO with holder KCBH-10 1SFA 616 600 R1101 0.019
1 NC with holder KCBH-01 1SFA 616 600 R1110 0.019
2 NO with holder KCBH-20 1SFA 616 600 R1102 0.032
2 NC with holder KCBH-11 1SFA 616 600 R1111 0.032
1 NO without holder KCB-10 SK 616 001-A 0.013
1 NC without holder KCB-01 SK 616 001-B 0.013
Holder for 3 blocks KCBH-00 SK 616 013-F 0.006
Toggle switches
1) No contact block in centreposition.
2) Contact block in centre positionis influenced in both position Aand C.
Accessories, see p. 35.Dimension drawings, see p. 56.
Contact functionsBlock positions as seen fromoperator front.
Two-position switchHandle Left Rightposition block block
A O O
C x x
O = not influenced (normal state)x = influenced (state changed)
Three-position momentary switchHandle Left Rightposition block block
A x O
B O O
C O x
O = not influenced (normal state)x = influenced (state changed)
Three-position maintained switchHandle Left Middle Rightposition block block block
A O x x
B O O O
C x x O
O = not influenced (normal state)x = influenced (state changed)
Note: Both operator andcontact block(s) must beordered to get a completepilot device
WeightSymbol Bezel Type Order Code kg
Operator – two positions
Maintained 1)
Black plastic KTS1-10B 1SFA 616 300 R1006 0.021Chrome plastic KTS1-20B 1SFA 616 300 R2006 0.021Metal KTS1-30B 1SFA 616 300 R3006 0.021
Operator – three positions
Momentary, spring return from A to B and C to B 1)
Black plastic KTS2-10B 1SFA 616 301 R1006 0.021Chrome plastic KTS2-20B 1SFA 616 301 R2006 0.021Metal KTS2-30B 1SFA 616 301 R3006 0.021
Maintained 2)
Black plastic KTS3-10B 1SFA 616 302 R1006 0.021Chrome plastic KTS3-20B 1SFA 616 302 R2006 0.021Metal KTS3-30B 1SFA 616 302 R3006 0.021
22 ABB1SFC 261001-EN, Ed. 5
Pilot lights and buzzers
Weight,Supply voltage Tone type Type Order Code kg
Buzzers
Black. Frequency: Approx. 2400 Hz. Loudness: Min 80 dB(A)/10 cm,
Rated current:≤8 mA. Service life >5000 h24 V AC/DC Continuous KB1-4010 1SFA 616 401 R4010 0.020115 V AC/DC Continuous KB1-4030 1SFA 616 401 R4030 0.020230 V AC Continuous KB1-4040 1SFA 616 401 R4040 0.02024 V AC/DC Pulsating KB1-4110 1SFA 616 401 R4110 0.020115 V AC/DC Pulsating KB1-4130 1SFA 616 401 R4130 0.020230 V AC Pulsating KB1-4140 1SFA 616 401 R4140 0.020
Weight,Supply voltage Type Order Code kg
Lamp blocks with holdermax. 230 V AC /DC 1) KCBH-001 1SFA 616 600 R1200 0.021
115 V AC 1) KCBH-002 1SFA 616 600 R1300 0.023
230 V AC 1) KCBH-003 1SFA 616 600 R1400 0.026
Accessories, see p. 29Dimension drawings, see p. 56-57
1) Bulb not included.
Weight,Type Order Code kg
Light diffusing lens – Accessory for pilot light
The lens is used instead of text cap 1SFA 616 920 R8005 0.001
Note: Both pilot light headand lamp block must beordered to get a completepilot light
Lens Weight,colour Type Order Code kg
Pilot light heads 1)
Red KL1-100R 1SFA 616 400 R1001 0.018Green KL1-100G 1SFA 616 400 R1002 0.018Yellow KL1-100Y 1SFA 616 400 R1003 0.018Blue KL1-100L 1SFA 616 400 R1004 0.018White KL1-100W 1SFA 616 400 R1005 0.018Clear KL1-100C 1SFA 616 400 R1008 0.018
Lens Weight,colour Type Order Code kg
Compact Pilot lights 1)
Direct supply. max 240 V, 3 W.Use filament bulb for best light.With LED or neon bulb add light diffusing lens.
Red CL-100R 1SFA 619 402 R1001 0.017Green CL-100G 1SFA 619 402 R1002 0.017Yellow CL-100Y 1SFA 619 402 R1003 0.017Blue CL-100L 1SFA 619 402 R1004 0.017White CL-100W 1SFA 619 402 R1005 0.017Clear CL-100C 1SFA 619 402 R1008 0.017
ABB 231SFC 261001-EN, Ed. 5
Signal Towers K70 and Signal Beacons KSB
Signal Towers K70
- Fast mounting of signalelements using bayonetfixing
- Easy changing of bulbs foreach module without tools
- Flexibility of signal elementcombination
- Up to 5 elements possible/upto 10 elements with bracketfor 2-sided mounting
- Flashing light elements can be mounted in each module
- Up to 5 flashing lightelements possible
- High protection ratingoptical and audible signalelements with IP 54.
- LED elements for long life
Simple fitting with quick fix systemEach K 70 module is equipped with a bayonet fixing with integralcontact system. The modules are fastened together by aligning thecorresponding white marks then with a gentle twist they are lockedinto place (see the figures).
Signal Beacons KSB
- Vandal-proof design withstandsevery mechanical and natural challengeboth indoors and outdoors.
- High protection rating IP 65- Cap consists of high impact polycarbonate (up to 20 J).- Bulb change via inside of control box.
ASI (-)
05
2
4
1
3
Uextern (+)Uextern (-)
ASI (+)
Connection plan Connection plan with ASInterface module
24 ABB1SFC 261001-EN, Ed. 5
Signal Towers K70
Weight,Colour Type Order Code kg
Optical modulesLight elementPermanent light, 12-240 V AC/DC. For bulb BA15d. Bulb not included.Red KL70-401R 1SFA 616 070 R4011 0.09Green KL70-401G 1SFA 616 070 R4012 0.09Yellow KL70-401Y 1SFA 616 070 R4013 0.09Blue KL70-401L 1SFA 616 070 R4014 0.09Clear KL70-401C 1SFA 616 070 R4018 0.09Blinking light, 24 V AC/DC. For bulb BA15d. Bulb not included.Red KL70-302R 1SFA 616 070 R3021 0.10Green KL70-302G 1SFA 616 070 R3022 0.10Yellow KL70-302Y 1SFA 616 070 R3023 0.10Blue KL70-302L 1SFA 616 070 R3024 0.10Clear KL70-302C 1SFA 616 070 R3028 0.10Flashing light, 24 V DC. Xenon tube included. Not changeable.Red KL70-203R 1SFA 616 070 R2031 0.12Green KL70-203G 1SFA 616 070 R2032 0.12Yellow KL70-203Y 1SFA 616 070 R2033 0.12Blue KL70-203L 1SFA 616 070 R2034 0.12Clear KL70-203C 1SFA 616 070 R2038 0.12Blinking light, 115 V AC/DC. For bulb BA15d. Bulb not included.Red KL70-312R 1SFA 616 070 R3121 0.10Green KL70-312G 1SFA 616 070 R3122 0.10Yellow KL70-312Y 1SFA 616 070 R3123 0.10Blue KL70-312L 1SFA 616 070 R3124 0.10Clear KL70-312C 1SFA 616 070 R3128 0.10Flashing light, 115 V AC. Xenon tube included. Not changeable.Red KL70-113R 1SFA 616 070 R1131 0.11Green KL70-113G 1SFA 616 070 R1132 0.11Yellow KL70-113Y 1SFA 616 070 R1133 0.11Blue KL70-113L 1SFA 616 070 R1134 0.11Clear KL70-113C 1SFA 616 070 R1138 0.11Blinking light, 230 V AC/DC. For bulb BA15d. Bulb not included.Red KL70-322R 1SFA 616 070 R3221 0.10Green KL70-322G 1SFA 616 070 R3222 0.10Yellow KL70-322Y 1SFA 616 070 R3223 0.10Blue KL70-322L 1SFA 616 070 R3224 0.10Clear KL70-322C 1SFA 616 070 R3228 0.10Flashing light, 230 V AC. Xenon tube included. Not changeable.Red KL70-123R 1SFA 616 070 R1231 0.11Green KL70-123G 1SFA 616 070 R1232 0.11Yellow KL70-123Y 1SFA 616 070 R1233 0.11Blue KL70-123L 1SFA 616 070 R1234 0.11Clear KL70-123C 1SFA 616 070 R1238 0.11LED Permanent light, 24 V AC/DC. LED included. Not changeable.Red KL70-305R 1SFA 616 070 R3051 0.10Green KL70-305G 1SFA 616 070 R3052 0.10Yellow KL70-305Y 1SFA 616 070 R3053 0.10Blue KL70-305L 1SFA 616 070 R3054 0.10White KL70-305C 1SFA 616 070 R3058 0.10LED Blinking light, 24 V AC/DC. LED included. Not changeable.Red KL70-306R 1SFA 616 070 R3061 0.10Green KL70-306G 1SFA 616 070 R3062 0.10Yellow KL70-306Y 1SFA 616 070 R3063 0.10Blue KL70-305L 1SFA 616 070 R3064 0.10White KL70-305C 1SFA 616 070 R3068 0.10LED Rotating light, 24 V AC/DC. LED included. Not changeable.Red KL70-307R 1SFA 616 070 R3071 0.10Green KL70-307G 1SFA 616 070 R3072 0.10Yellow KL70-307Y 1SFA 616 070 R3073 0.10Blue KL70-305L 1SFA 616 070 R3074 0.10White KL70-305C 1SFA 616 070 R3078 0.10
Dimension drawings, see p. 58.
ABB 251SFC 261001-EN, Ed. 5
Signal Towers K70Accessories
Weight,Description Type Order Code kg
Bulbs for Signal Tower K70 Bulb Ba15d, 42 mm, Max 7 W For permanent or blinking light.:24 V, 5 W, AC/DC 1SFA 616 923 R1028 0.009115 V, 5 W, AC/DC 1SFA 616 923 R1118 0.009230 V, 5 W, AC/DC 1SFA 616 923 R1148 0.009
LED bulbs for Signal Tower K70 Ba 15d. For 24 V AC/DC, 40 mAColour: Red KA4-1021 1SFA 616 924 R1021 0.009
Green KA4-1022 1SFA 616 924 R1022 0.009Yellow KA4-1023 1SFA 616 924 R1023 0.009Blue KA4-1024 1SFA 616 924 R1024 0.009White KA4-1025 1SFA 616 924 R1025 0.009
Audible modulesBuzzer element85 dB, continuous or pulsating tone, adjustable24 V AC/DC KB70-3001 1SFA 616 071 R3001 0.11115 V AC/DC KB70-3101 1SFA 616 071 R3101 0.11230 V AC KB70-1201 1SFA 616 071 R1201 0.12
Siren elementMulti function, 8 diff. tones adjustable, volume adjustable100 dB, 115 V AC KS70-1104 1SFA 616 073 R1104 0.13
Multi function, 8 diff. tones adjustable, volume adjustable100 dB, 230 V AC KS70-1204 1SFA 616 073 R1204 0.12
Multi function, 7 diff. tones adjustable, volume adjustable, remote control100 dB, 24 V DC KS70-2004 1SFA 616 073 R2004 0.12
Multi function, 8 diff. tones adjustable, volume adjustable100 dB, 24 V AC/DC KS70-3004 1SFA 616 073 R3004 0.12
Continuous tone alternating108 dB, 24 V DC KS70-2002 1SFA 616 073 R2002 0.15
AS-Interface Module18,5-31,6 V AC/DC KASI-4101 1SFA 616 079 R4101 0.11for external voltage18,5-31,6 V AC/DC KASI-4102 1SFA 616 079 R4102 0.14
Terminal elementsFor tube mounting,including cap KT70-1001 1SFA 616 075 R1001 0.15
For bracket or base,including cap KT70-1002 1SFA 616 075 R1002 0.15
Special partsContact boxCable exit at side KA70-1001 1SFA 616 077 R1001 0.07Magnetic base KA70-1002 1SFA 616 077 R1002 0.31
Base with tubeD=25 mm L=110 mm KA70-1011 1SFA 616 077 R1011 0.06
Base for tubeD=25 mm, Plastic KA70-1012 1SFA 616 077 R1012 0.03D=25 mm, Metal KA70-1013 1SFA 616 077 R1013 0.32
Tube, anodized aluminiumD=25 mm L=250 mm KA70-1021 1SFA 616 077 R1021 0.08D=25 mm L=400 mm KA70-1022 1SFA 616 077 R1022 0.12
Bracket1-sided mounting KA70-1031 1SFA 616 077 R1031 0.072-sided mounting KA70-1032 1SFA 616 077 R1032 0.07For tube mounting KA70-1033 1SFA 616 077 R1033 0.07For surface mounting KA70-1034 1SFA 616 077 R1034 0.07
Dimension drawings, see p. 58.
KT70-1001
KA70-1002
KA70-1001
KA70-1001
KA70-1032
KT70-1002
KA70-1011KA70-1013
KA70-1012
max 5elements
KB70/K S70
KL70
(KT70)
KA70-1001
KA
70-1
021
KA70-1031
KA
70-1
022
KASI
KA70-1033
KA70-1034
26 ABB1SFC 261001-EN, Ed. 5
Weight,Colour Type Order Code kg
Signal BeaconsPermanent light, 12-240 V AC/DC. For bulb BA15d. Bulb not included.Red KSB-401R 1SFA 616 080 R4011 0.13Green KSB-401G 1SFA 616 080 R4012 0.13Yellow KSB-401Y 1SFA 616 080 R4013 0.13Blue KSB-401L 1SFA 616 080 R4014 0.13Clear KSB-401C 1SFA 616 080 R4018 0.13
Flashing light, 24 V DC. Xenon tube included. Not changeable.Red KSB-203R 1SFA 616 080 R2031 0.14Green KSB-203G 1SFA 616 080 R2032 0.14Yellow KSB-203Y 1SFA 616 080 R2033 0.14Blue KSB-203L 1SFA 616 080 R2034 0.14Clear KSB-203C 1SFA 616 080 R2038 0.14
Flashing light, 115 V AC. Xenon tube included. Not changeable.Red KSB-113R 1SFA 616 080 R1131 0.14Green KSB-113G 1SFA 616 080 R1132 0.14Yellow KSB-113Y 1SFA 616 080 R1133 0.14Blue KSB-113L 1SFA 616 080 R1134 0.14Clear KSB-113C 1SFA 616 080 R1138 0.14
Flashing light, 230 V AC. Xenon tube included. Not changeable.Red KSB-123R 1SFA 616 080 R1231 0.14Green KSB-123G 1SFA 616 080 R1232 0.14Yellow KSB-123Y 1SFA 616 080 R1233 0.14Blue KSB-123L 1SFA 616 080 R1234 0.14Clear KSB-123C 1SFA 616 080 R1238 0.14
LED Permanent light, 24 V AC/DC. LED included. Not changeable.Red KSB-305R 1SFA 616 080 R3051 0.14Green KSB-305G 1SFA 616 080 R3052 0.14Yellow KSB-305Y 1SFA 616 080 R3053 0.14
LED Blinking light, 24 V AC/DC. LED included. Not changeable.Red K SB-306R 1SFA 616 080 R3061 0.14Green K SB-306G 1SFA 616 080 R3062 0.14Yellow K SB-306Y 1SFA 616 080 R3063 0.14
LED Rotating light, 24 V AC/DC. LED included. Not changeable.Red KSB-307R 1SFA 616 080 R3071 0.14Green KSB-307G 1SFA 616 080 R3072 0.14Yellow KSB-307Y 1SFA 616 080 R3073 0.14
Special partsAnti-twist device KASB-1000 1SFA 616 087 R1000
Bulbs for Signal Beacons Max 10 W. For permanent light.
Bulb Ba15d, 52 mm:12 V, 7 W, AC/DC 1SFA 616 922 R1018 0.01124 V, 7 W, AC/DC 1SFA 616 922 R1028 0.011115 V, 7 W, AC/DC 1SFA 616 922 R1118 0.011220-260 V, 7-10 W, AC/DC 1SFA 616 922 R1148 0.011
Dimension drawings, see p. 59
Signal Beacons KSB
ABB 271SFC 261001-EN, Ed. 5
Reset pushbuttons
Lens Weight,Colour Text Type Order Code kg
Without shaftWith flush buttonRed No text KPR1-100R 1SFA 616 160 R1001 0.020Green No text KPR1-100G 1SFA 616 160 R1002 0.020
II KPR1-103G 1SFA 616 160 R1032 0.020Yellow No text KPR1-100Y 1SFA 616 160 R1003 0.020Blue No text KPR1-100L 1SFA 616 160 R1004 0.020
R KPR1-101L 1SFA 616 160 R1014 0.020White No text KPR1-100W 1SFA 616 160 R1005 0.020
R KPR1-101W 1SFA 616 160 R1015 0.020I KPR1-102W 1SFA 616 160 R1025 0.020II KPR1-103W 1SFA 616 160 R1035 0.020
Black No text KPR1-100B 1SFA 616 160 R1006 0.020RESET KPR1-104B 1SFA 616 160 R1046 0.020
With extended buttonRed No text KPR2-100R 1SFA 616 161 R1001 0.021
0 KPR2-105R 1SFA 616 161 R1051 0.021White No text KPR2-100W 1SFA 616 161 R1005 0.021Black No text KPR2-100B 1SFA 616 161 R1006 0.021
0 KPR2-105B 1SFA 616 161 R1056 0.021
With shaft The shaft can be cut to desired length
With flush buttonRed No text KPR3-100R 1SFA 616 162 R1001 0.027Green No text KPR3-100G 1SFA 616 162 R1002 0.027
II KPR3-103G 1SFA 616 162 R1032 0.027Yellow No text KPR3-100Y 1SFA 616 162 R1003 0.027Blue No text KPR3-100L 1SFA 616 162 R1004 0.027
R KPR3-101L 1SFA 616 162 R1014 0.027White No text KPR3-100W 1SFA 616 162 R1005 0.027
R KPR3-101W 1SFA 616 162 R1015 0.027I KPR3-102W 1SFA 616 162 R1025 0.027II KPR3-103W 1SFA 616 162 R1035 0.027
Black No text KPR3-100B 1SFA 616 162 R1006 0.027RESET KPR3-104B 1SFA 616 162 R1046 0.027
With extended buttonRed No text KPR4-100R 1SFA 616 163 R1001 0.028
0 KPR4-105R 1SFA 616 163 R1051 0.028White No text KPR4-100W 1SFA 616 163 R1005 0.028Black No text KPR4-100B 1SFA 616 163 R1006 0.028
0 KPR4-105B 1SFA 616 163 R1056 0.028
Dimension drawings, see p. 57
AccessoriesIn application with a long shaft a flexible joint can be usedto avoid damages caused by incautious handling of the shaft.
Description Type Order Code Qty (pcs) kg
Shaft including fixing nut KA1-8046 1SFA 616 920 R8046 10 0.070Flexible joint KA1-8047 1SFA 616 920 R8047 10 0.051
28 ABB1SFC 261001-EN, Ed. 5
Enclosures, non-metallicDegree of protection IP 65
Colour Weight,Size top/bottom Type Order Code kg
1-seat Grey/black KEP1-0 SK 616 801-AA 0.16
1-seat Yellow/black KEPY1-0 SK 616 801-DA 0.16
2-seat Grey/black KEP2-0 SK 616 802-AA 0.21
3-seat Grey/black KEP3-0 SK 616 803-AA 0.2
4-seat Grey/black KEP4-0 SK 616 804-AA 0.31
6-seat Grey/black KEP6-0 SK 616 806-AA 0.40
Dimension drawings, see p. 60.When orderingUse the order form on page 51.
• Select operators from page 6-22.
N.B. Operators for vertically mounted selectorswitches must be ordered from page 30-31.3 pos. toggle switches and double pushbuttonsare not available for vertical mounting.
• Select contact blocks and lamp blocks for
rear mounting, see page 29.
• Accessories, see page 29 and 37.N.B. One spacer per operator has to be ordered if legendplate is not used.
For Emergency Stop PushbuttonsUse adapter plate 1SFA 616 920 R8014. See page 29.
ABB 291SFC 261001-EN, Ed. 5
Enclosures, non-metallicAccessories
Weight,Description Type Order Code kg
Contact block for rear mounting1NO KCB-10B SK 616 002-A 0.0131NC KCB-01B SK 616 002-B 0.013
Double contact block rear mountingTo be used when contact blocks in position 3- and 4- are needed.
2NO KCB-20B SK 616 006-A 0.0262NC KCB-02B SK 616 006-B 0.0261NO+1NC KCB-11B SK 616 006-C 0.026
Contact block with gold plated contacts for rear mounting1NO KCB-10BG SK 616 008-A 0.0131NC KCB-01BG SK 616 008-B 0.013
Lamp block for rear mountingFor 2 W, max. 230 V AC and DC bulb,
neon lamp or LED. KLB-1B SK 616 003-D 0.015
115 V AC supply voltage. 60 V lamp max. 1.2 W. KLB-2B SK 616 003-E 0.017
230 V AC supply voltage.130 V lamp max. 2 W. KLB-3B SK 616 003-F 0.020
Protective sleeveTo make a rear mounted lamp block screen protected, IP 20.
Protective sleeve 5396 0543-1 0.002
Cable glandBlack plastic. Threaded outer sleeve. Sealing ring Pr 22.5 included.
Sleeve diameter SealingPr Pg min. mm diameter mm
22.5 16 18 9 – 15 SK 175 931-AF 0.01028.3 21 24 12 - 20 SK 175 931-AK 0.017
NutBlack plastic. For cable gland above.Pr Pg
22.5 16 SK 175 923-3 0.00228.3 21 SK 175 923-4 0.004
Earthing terminalFor non-metallic enclosure. 1-seat enclosure has space for one terminaland the others have space for two terminals.
Earthing device SK 615 017-A 0.005
Spacer1mm thick. Needed when legend plates are not used in non-metallic enclosures.
Spacer SK 615 516-1 0.002Spacer for Emergency StopPushbutton on page 14 1SFA 616 920 R8045 0.004
Blanking plugBlack non-metallic SK 616 502-B 0.030
Impact protectionFor increased protection against heavy shocks.
Impact protection SK 616 590-D 0.010
Adapter plateFor Emergency Stop pushbuttons on page 14. For rear mountedcontact blocks and lamp blocks. 1SFA 616 920 R8014 0.007
30 ABB1SFC 261001-EN, Ed. 5
Accessories, see p. 29 and 37.Dimension drawings, see p. 56.
Contact functionsBlock positions as seen fromoperator front.
No contact block in the centreposition.
Handle Lower Upperposition block block
A (B) O O
C x x
O = not influenced (normal state)x = influenced (state changed)
Selector switches, two positionsOnly for vertically mounted enclosures
Handle Weight,Symbol colour Type Order Code kg
Short handle – non-illuminated
Maintained
Red K2SSV1-10R 1SFA 616 220 R1001 0.024Black K2SSV1-10B 1SFA 616 220 R1006 0.024
Red K2SSV2-10R 1SFA 616 221 R1001 0.024Black K2SSV2-10B 1SFA 616 221 R1006 0.024
Momentary, spring return from C to B
Red K2SSV3-10R 1SFA 616 222 R1001 0.024Black K2SSV3-10B 1SFA 616 222 R1006 0.024
Short handle – illuminated
Maintained
Red K2SSV1-11R 1SFA 616 220 R1101 0.024Green K2SSV1-11G 1SFA 616 220 R1102 0.024Yellow K2SSV1-11Y 1SFA 616 220 R1103 0.024
Red K2SSV2-11R 1SFA 616 221 R1101 0.024Green K2SSV2-11G 1SFA 616 221 R1102 0.024Yellow K2SSV2-11Y 1SFA 616 221 R1103 0.024
Momentary, spring return from C to B
Red K2SSV3-11R 1SFA 616 222 R1101 0.024Green K2SSV3-11G 1SFA 616 222 R1102 0.024Yellow K2SSV3-11Y 1SFA 616 222 R1103 0.024
Contact blocks and lamp blocks – see page 29
Bezel in chrome plastic or metalReplace 1 in theType K2SSVX-1 XXCat. No. 1SFA 616 XXX R 1 XXX
2 for chrome plastic bezel
3 for metal bezel
ABB 311SFC 261001-EN, Ed. 5
Handle Weight,Symbol colour Type Order Code kg
Short handle – non-illuminated
Maintained
Red K3SSV1-10R 1SFA 616 230 R1001 0.024Black K3SSV1-10B 1SFA 616 230 R1006 0.024
Momentary, spring return from A and C to B
Red K3SSV2-10R 1SFA 616 231 R1001 0.024Black K3SSV2-10B 1SFA 616 231 R1006 0.024
Momentary, spring return from C to B
Red K3SSV3-10R 1SFA 616 232 R1001 0.024Black K3SSV3-10B 1SFA 616 232 R1006 0.024
Short handle – illuminated
Maintained
Red K3SSV1-11R 1SFA 616 230 R1101 0.024Green K3SSV1-11G 1SFA 616 230 R1102 0.024Yellow K3SSV1-11Y 1SFA 616 230 R1103 0.024
Momentary, spring return from A and C to B
Red K3SSV2-11R 1SFA 616 231 R1101 0.024Green K3SSV2-11G 1SFA 616 231 R1102 0.024Yellow K3SSV2-11Y 1SFA 616 231 R1103 0.024
Momentary, spring return from C to B
Red K3SSV3-11R 1SFA 616 232 R1101 0.024Green K3SSV3-11G 1SFA 616 232 R1102 0.024Yellow K3SSV3-11Y 1SFA 616 232 R1103 0.024
Contact blocks and lamp blocks – see page 29
Accessories, see p. 29 and 37.Dimension drawings, see p. 56.
Contact functionsBlock positions as seen fromoperator front.
No contact block in the centreposition.
Handle Lower Upperposition block block
A x O
B O O
C O x
O = not influenced (normal state)x = influenced (state changed)
Selector switches, three positionsOnly for vertically mounted enclosures
Bezel in chrome plastic or metalReplace 1 in theType K2SSVX-1 XXCat. No. 1SFA 616 XXX R 1 XXX
2 for chrome plastic bezel
3 for metal bezel
32 ABB1SFC 261001-EN, Ed. 5
Enclosures, metallicDegree of protection IP 671)
Dimension drawings, see p. 60.1) Pushbuttons with sealingmembrane
2) Flanges are not included
Weight,Size Colour Type Order Code kg
1-seat Grey KEM1-0 SK 616 701-AA 0.40
2-seat Grey KEM2-0 SK 616 702-AA 0.70
3-seat Grey KEM3-0 SK 616 703-AA 0.80
4-seat Grey KEM4-0 SK 616 704-AA2) 1.20
6-seat Grey KEM6-0 SK 616 706-AA2) 1.40
Select contact blocks for front mounting, see page 35.
Select lamp blocks for front mounting, see page 35.
Select accessories from page 33, 36-38.
ABB 331SFC 261001-EN, Ed. 5
Enclosures, metallicAccessories
Weight,Description Order Code kg
Cable glandMetal. Threaded outer sleeve. Sealing ring Pr 22.5 (Pg 16) included.
SealingPr Pg diameter mm
22.5 16 8.5 – 11.5 SK 170 7685 0.04022.5 16 10.5 – 13.5 SK 170 7686 0.04522.5 16 12.5 – 15.0 SK 170 7687 0.050
Hexagon nutMetal.
Pr 22.5 Pg 16 SK 175 0152 0.010
Sealing ringRubber.
Pr 22.5 Pg 16 SK 175 0182 0.005
Blanking platesWithout holes. Metal. Black. For 4- and 6-seat enclosures. Note: Gasket not includedFor flange Suitable flange gasketopening Order Code
FL 13 SK 170 4536 SK 172 105-AA 0.110
With holes. Metal. Black. For 4- and 6-seat enclosures. Note: Gasket not includedFor flange Suitable flange gasketopening Order Code
Two threaded holes Pr 22.5 (Pg 16). Hole centre distance 50 mm.FL 13 SK 170 4536 SK 172 105-AD 0.110
Three threaded holes Pr 22.5 (Pg 16). Hole centre distance 38 mm.FL 13 SK 170 4536 SK 172 105-AE 0.100
Four threaded holes Pr 22.5 (Pg 16). Hole centre distance 30 mm.FL 13 SK 170 4536 SK 172 105-AF 0.100
Flange gasketFL 13 SK 170 4536 0.005
Blanking plugApplicable to cover a 22 mm-hole in anenclosure instead of an operator.Gasket and nut included.Black non-metallic SK 616 502-B 0.030
Sealing plugPlastic. Black.For holes
Pr 22.5 Pg 16 SK 175 919-3 0.010
34 ABB1SFC 261001-EN, Ed. 5
Assembled stations
Fig. Legend Button/See plate text cap col,our Weightbelow 1) Left Centre Right Left Centre Right Order Code kg
Non-metallic enclosuresDegree of protection IP 65, (dependent on the degree of protection of each pushbutton)
1-seat, grey top/black bottomOne pushbutton – momentary
1 – I – – White – 1SFA 616 811 R1002 0.0451 – I – – Green – 1SFA 616 811 R1001 0.0452 – O – – Black – 1SFA 616 811 R1004 0.0452 – O – – Red – 1SFA 616 811 R1003 0.045
One 40 mm emergency stop button – twist release6 Emerg. Stop (English) – Red – 1SFA 616 811 R1016 0.089
1-seat, yellow top/black bottomOne 40 mm emergency stop button – twist release
6 – – – – Red – 1SFA 616 821 R1005 0.089
2-seat, grey/black bottomTwo pushbuttons – momentary
2,1 O – l Red – Green 1SFA 616 812 R1001 0.079
3-seat, grey/black bottomThree pushbuttons – momentary
1, 2, 1 l O l l Green Red Green 1SFA 616 813 R1004 0.112
Two pushbuttons – momentary – pilot lamp in centre positionMax 230 V bulb2, 4, 1 O l l Red Clear Green 1SFA 616 813 R1001 0.116
Two pushbuttons – momentary – pilot lamp in centre positionWith diode and resistor. For supply voltage 230 V AC and 130V bulb, 5911 086-152, 5, 1 O I I Red Clear Green 1SFA 616 813 R1003 0.121
Metallic enclosures
1-seat, greyOne pushbutton – momentaryDegree of protection IP 66.1 – I – – Green – 1SFA 616 831 R1001 0.429
One 40 mm mushroom button – maintained – pull releaseDegree of protection IP 66.2 Emerg.stop (English) – Red – 1SFA 616 831 R1018 0.452
1)
Fig. 1 Fig. 2 Fig. 3
Accessories, see p. 35.Dimension drawings, see p. 60.
Fig. 4 Fig. 5 Fig. 6
ABB 351SFC 261001-EN, Ed. 5
AccessoriesContact blocks, lamp blocks and holders
Max. numberof blocks Included Weight, in holder blocks Type Order Code kg
Contact blocks and lamp blocks with holder for front mountingFor non-illuminated operators3 1 NC KCBH-01 1SFA 616 600 R1110 0.0193 1 NO KCBH-10 1SFA 616 600 R1101 0.0193 2 NC KCBH-02 1SFA 616 600 R1120 0.0323 2 NO KCBH-20 1SFA 616 600 R1102 0.0323 3 NC KCBH-03 1SFA 616 600 R1130 0.0453 3 NO KCBH-30 1SFA 616 600 R1103 0.0453 1 NO + 1 NC KCBH-11 1SFA 616 600 R1111 0.0323 1 NO + 2 NC KCBH-12 1SFA 616 600 R1121 0.0453 2 NO + 1 NC KCBH-21 1SFA 616 600 R1112 0.045
For illuminated operators3 1 NC + 1 LB KCBH-011 1SFA 616 600 R1210 0.0343 1 NO + 1 LB KCBH-101 1SFA 616 600 R1201 0.0343 1 NO + 1 NC
+ 1 LB KCBH-111 1SFA 616 600 R1211 0.0473 2 NC + 1 LB KCBH-021 1SFA 616 600 R1220 0.0473 2 NO + 1 LB KCBH-201 1SFA 616 600 R1202 0.047
Single contact blocks for front mounting1)
- 1 NO KCB-10 SK 616 001-A 0.013- 1 NC KCB-01 SK 616 001-B 0.013
With gold plated contacts
- 1 NO KCB-10G SK 616 007-A 0.013- 1 NC KCB-01G SK 616 007-B 0.013
Double contact block front mountingTo be used together with KCBH5-00 when contact blocks in position 4- and 5- are needed.Also when using KCBH-00 together with selector switch and contact block in position 3- is needed.
2NO KCB-20 SK 616 005-A 0.0262NC KCB-02 SK 616 005-B 0.0261NO+1NC KCB-11 SK 616 005-C 0.026
Single lamp blocks for front mounting, Ba 9s base1)
For 2 W, max. 230 V AC and DCfilament bulb, neon bulb or LED. KLB-1 SK 616 003-A 0.015
115 V AC supply voltage.For 60 V filament bulbmax. 1.2 W KLB-2 SK 616 003-B 0.017
230 V AC supply voltage.For 130 V filament bulbmax. 2 W. K LB-3 SK 616 003-C 0.020
115 V AC and DC supply voltage.For 24 V LED KLB-4 SK 616 003-G 0.017
24 V AC and DC supply voltage. With resistor.Intended for electronic circuits. The resistor limits the making currentand protects against disturbances in the electronic circuit.For 24 V filament bulb KLB-5 SK 616 003-M 0.017
HoldersHolder for front mounting.For three blocks KCBH-00 SK 616 013-F 0.006For five blocks KCBH5-00 1SFA 616 601 R1100 0.008
For lamp blocks with transformerand transformer blocks,see page 36.
1) Contact blocks and lamp blocksfor rear mounting, see page 29.
Contact symbols
36 ABB1SFC 261001-EN, Ed. 5
AccessoriesTransformer blocks, diode blocks and bulbs.Ba 9s base
Primary Secondary Weight,voltage voltage Type Order Code kg
Transformer with lamp holder for front mounting, Ba 9s baseFor 6 or 24 V filament bulb and 24 V LED. Rated power 1.5 W.Intended to supply a 1.2 W filament bulb.110 - 127 V AC 6 V AC 1SFA 616 950 R1001 0.095220 - 250 V AC 6 V AC 1SFA 616 950 R1002 0.095380 - 420 V AC 6 V AC 1SFA 616 950 R1003 0.095440 - 480 V AC 6 V AC 1SFA 616 950 R1004 0.095500 - 600 V AC 6 V AC 1SFA 616 950 R1005 0.095
110 - 127 V AC 24 V AC 1) 1SFA 616 950 R1011 0.095220 - 250 V AC 24 V AC 1) 1SFA 616 950 R1012 0.095380 - 420 V AC 24 V AC 1) 1SFA 616 950 R1013 0.095440 - 480 V AC 24 V AC 1) 1SFA 616 950 R1014 0.095
Transformer block for illuminated operators 2)
For 6 or 24 V filament bulb and 24 V LED. Rated power 1.5 W.Intended to supply a 1.2 W filament bulb mounted in lamp block SK 616 003-A only.
110 – 127 V AC 6 V AC 1SFA 616 950 R2001 0.095220 – 250 V AC 6 V AC 1SFA 616 950 R2002 0.095380 – 420 V AC 6 V AC 1SFA 616 950 R2003 0.095440 – 480 V AC 6 V AC 1SFA 616 950 R2004 0.095500 – 600 V AC 6 V AC 1SFA 616 950 R2005 0.095
110 – 127 V AC 24 V AC 1) 1SFA 616 950 R2011 0.095220 – 250 V AC 24 V AC 1) 1SFA 616 950 R2012 0.095380 – 420 V AC 24 V AC 1) 1SFA 616 950 R2013 0.095440 – 480 V AC 24 V AC 1) 1SFA 616 950 R2014 0.095
Diode blockTo be used if several lamps are to be connected to a common lamp-test pushbutton. A diode must beconnected in series with each lamp. The diode block snaps onto the lamp block or is placed at the side.
Diode block KDB-1001 SK 616 009-A 0.015
Diagram for lamp test with three diode blockls.
1) Can be used with LED bulb.2) To be used together with directly supplied lamp blocks only.
WeightDescription Order Code kg
Filament bulbsType of current: AC/DC. A lamp changing tool is required for changing bulb.
Rated Rated Rated Luminance Servicevoltage current output mcd life
6 V 200 mA 1.2 W 350 10 000 h 5911 086-11 0.00212 V 100 mA 1.2 W 230 10 000 h 5911 086-12 0.00224 V 50 mA 1.2 W 280 10 000 h 5911 086-13 0.00230 V 40 mA 1.2 W 250 10 000 h 5911 086- 4 0.00248 V 42 mA 2 W 500 6 000 h 5911 086- 5 0.00260 V 20 mA 1.2 W 190 5 000 h 5911 086-14 0.002
110 V 18 mA 2 W 250 7 500 h 5911 086- 7 0.002130 V 15 mA 2 W 120 7 500 h 5911 086-15 0.002
ABB 371SFC 261001-EN, Ed. 5
AccessoriesLEDs. Ba 9s base.
WeightDescription Order Code kg
LEDWith one diode chip mounted on a Ba 9s base.Choose the same colour for the LED and the lamp cap or else use a clear lamp cap. White LED only withclear lamp cap.At DC the lamp base have to be connected to cathode (-) and the bottom contact to anode (+).
Rated Rated Wave-voltage current Colour length Luminance
Type of current: DC 1) Service life >?? 000 hours.12 V 15 mA Red 630 nm 250 mcd 1SFA 616 921 R2011 0.00512 V 15 mA Green 525 nm 1000 mcd 1SFA 616 921 R2012 0.00512 V 15 mA Yellow 592 nm 250 mcd 1SFA 616 921 R2013 0.00512 V 15 mA Blue 470 nm 450 mcd 1SFA 616 921 R2014 0.00512 V 15 mA White x=0.31 600 mcd 1SFA 616 921 R2015 0.005
y=3,2Type of current: (AC)/DC 1) Service life >50 000 hours.
24 V 15 mA Red 630 nm 250 mcd 1SFA 616 921 R2021 0.00524 V 15 mA Green 525 nm 800 mcd 1SFA 616 921 R2022 0.00524 V 15 mA Yellow 592 nm 250 mcd 1SFA 616 921 R2023 0.00524 V 15 mA Blue 470 nm 400 mcd 1SFA 616 921 R2024 0.00524 V 15 mA White x=0.31 500 mcd 1SFA 616 921 R2025 0.005
y=3,2Type of current: (AC)/DC 1) Service life >50 000 hours.
48 V 12 mA Red 630 nm 200 mcd 1SFA 616 921 R2041 0.00548 V 12 mA Yellow 525 nm 640 mcd 1SFA 616 921 R2042 0.00548 V 12 mA Green 592 nm 200 mcd 1SFA 616 921 R2043 0.00548 V 12 mA Blue 470 nm 320 mcd 1SFA 616 921 R2044 0.00548 V 12 mA White x=0.31 400 mcd 1SFA 616 921 R2045 0.005
y=3,2Type of current: AC/DC 1) Service life >50 000 hours.
60 V 10 mA Red 630 nm 160mcd 1SFA 616 921 R2051 0.00560 V 10 mA Yellow 525 nm 530 mcd 1SFA 616 921 R2052 0.00560 V 10 mA Green 592 nm 160 mcd 1SFA 616 921 R2053 0.00560 V 10 mA Blue 470 nm 260 mcd 1SFA 616 921 R2054 0.00560 V 10 mA White x=0.31 330 mcd 1SFA 616 921 R2055 0.005
y=3,21) At AC the luminance is decreased with 30 % and there is also a slight flickering
Type of current: AC Service life 25 000 hours.110-130 V 4-6 mA Red 630 nm 25-35 mcd 1SFA 616 921 R2131 0.005110-130 V 4-6 mA Green 525 nm 300-350 mcd 1SFA 616 921 R2132 0.005110-130 V 4-6 mA Yellow 592 nm 60-90 mcd 1SFA 616 921 R2133 0.005110-130 V 4-6 mA Blue 470 nm 130-150 mcd 1SFA 616 921 R2134 0.005110-130 V 4-6 mA White x=0.31 160-200 mcd 1SFA 616 921 R2135 0.005
y=3,2
Type of current: AC/DC Service life 25 000 hours.110-130 V 4-6 mA Red 630 nm 25-35 mcd 1SFA 616 921 R2141 0.005110-130 V 4-6 mA Green 525 nm 300-350 mcd 1SFA 616 921 R2142 0.005110-130 V 4-6 mA Yellow 592 nm 60-90 mcd 1SFA 616 921 R2143 0.005110-130 V 4-6 mA Blue 470 nm 110-130 mcd 1SFA 616 921 R2144 0.005110-130 V 4-6 mA White x=0.31 160-200 mcd 1SFA 616 921 R2135 0.005
y=3,2
Type of current: AC Service life 25 000 hours.230 V 4 mA Red 630 nm 25 mcd 1SFA 616 921 R2221 0.005230 V 4 mA Green 525 nm 300 mcd 1SFA 616 921 R2222 0.005230 V 4 mA Yellow 592 nm 60 mcd 1SFA 616 921 R2223 0.005230 V 4 mA Blue 470 nm 130 mcd 1SFA 616 921 R2224 0.005230 V 4 mA White x=0.31 160 mcd 1SFA 616 921 R2225 0.005
y=3,2
Flashing LEDA lamp changing tool is required for changing bulb.Choose the same colour for the LED and the lamp cap or else use a clear lamp cap.The lamp base have to be connected to cathode (-) and the bottom contact to anode (+).Type of current DC.Rated Rated Wave Servicevoltage current Colour length life
24 V 25 mA Red 630 nm 50 000 h 4950 512-1 0.00524 V 25 mA Green 565 nm 50 000 h 4950 512-2 0.00524 V 25 mA Yellow 585 nm 50 000 h 4950 512-3 0.005
38 ABB1SFC 261001-EN, Ed. 5
AccessoriesMiscellaneous
WeightDescription Type Order Code kg
Lamp changing toolFor LED and for bulbs. KA1-8072 1SFA 616 920 R8072 0.002
Mounting toolUsed for tightening the nut of the attachment device in confined spaces.
1SFA 616 920 R8015 0.021
Membrane of siliconeOf transparent, heat and cold resistant silicon rubber. Does not harden at low temperature.Gives IP 67 degree of protection. When membrane is used, remove the gasket.
For operator with: Flush button 1SFA 616 920 R8052 0.002Extended button 1SFA 616 920 R8002 0.002Double pushbutton SK 616 503-4 0.002
Sealing shroudFor key-operated selector switches KA1-8036 1SFA 616 920 R8036 0.020
Emergency stop shroudYellow Emergency stop shroud for 40 mm Emergency stop pushbuttons.Prevents accidental activation of the Emergency stop pushbutton.
KA1-8053 1SFA 616 920 R8053 0.040
Protective ringTo prevent inadvertant operation.Not together with legend plate holder. SK 615 512-1 0.002
Protective coverFor flush button. To prevent inadvertant operation.Not together with legend plate holder. 1SFA 616 920 R8010 0.008
Mounting kit for DIN-railTo be used only with pushbuttons and pilot lights 1SFA 616 920 R8001 0.025
30 mm adaptors (Legend plates for 30 mm by request)For use when fitting the 22 mm pushbutton range in 30 mm mounting holes. (1.5–4 mm panels)
For use with 22 mm Pushbuttons, Switches and Pilot LightsBlack plastic 1SFA 616 920 R8003 0.012Metal 1SFA 616 920 R8004 0.037
For use with 22 mm Emergency StopBlack plastic 1SFA 616 920 R8027 0.007Metal 1SFA 616 920 R8028 0.021
For use with 22 mm Potentiometer, Compact Pilot Light and BuzzerBlack plastic 1SFA 616 920 R8029 0.010Metal 1SFA 616 920 R8030 0.035
Extra keyRonis 455 (Key code 71) SK 616 021-71 0.007Ronis 421 (Key code 72) SK 616 021-72 0.007Ronis 3433-E (Key code 73) SK 616 021-73 0.007
Lock shackle for mushroom button with 30 mm button, twist releaseCannot be used in ABB non-metallic enclosure. For 30 mm diameter mushroom button, twist release.Lockable with 4 padlocks when button is in the depressed position.Max. lock yoke diameter 7 mm. SK 615 502-D 0.080
Label sheetFor marking of contact blocks at two levels. 2949 1725-1 0.001
Guide washerTo improve antirotation 2154 373-2 0.001
ABB 391SFC 261001-EN, Ed. 5
AccessoriesLegend plates – Survey
Fixed legend plates: Example
Emergency
S t o p
Legend plates:inserts: Example
Text caps: Example
Special legend plates: Example
Silver-grey aluminium
Grey plastic Black plastic
Silver-greyaluminium
Flushbutton
Extendedbutton
Pilotlight
Yellow aluminium Yellow plastic
page 45
page 48-49
Pushbuttonspage 40 and 44
Two-positionselector switchespage 41
Three-positionselector switchespage 42
Toggle switches,two-positionspage 43
Toggle switches,three-positionspage 43
Fixed plates with customer-selectedtext/symbols:-See page 41-44Fixed plates (black/white) without text:-See page -44
Insert plates with customer/selectedtext/symbols:-See page 49 Brushed aluminium on black plastic Silver-grey aluminium Plastic inserts with one side black and
the other white Plastic pocket with paper legend slip
1. 2. 3.page 46-47
40 ABB1SFC 261001-EN, Ed. 5
AccessoriesLegend plates for pushbuttons
Silver-greyAluminium
Symbol/text Order Code Weight, kg
Engraved fixed legend plates, with symbols1)
O SK 615 550-61 0.002l SK 615 550-62 0.002l l SK 615 550-63 0.002
SK 615 562-12 0.002 SK 615 562-18 0.002 SK 615 562-27 0.002
Engraved fixed legend plates, with text1)
EnglishClose SK 615 552-13 0.002Down SK 615 552-14 0.002Emergency stop SK 615 552-15 0.002Fast SK 615 552-16 0.002Forward SK 615 552-17 0.002In SK 615 550-29 0.002Inching SK 615 552-18 0.002Left SK 615 552-39 0.002Lower SK 615 552-20 0.002Off SK 615 552-21 0.002On SK 615 552-22 0.002Open SK 615 552-23 0.002Out SK 615 552-24 0.002Raise SK 615 552-25 0.002Reset SK 615 552-27 0.002Reverse SK 615 552-28 0.002Right SK 615 552-40 0.002Run SK 615 552-29 0.002Slow SK 615 552-30 0.002Start SK 615 550-44 0.002Stop SK 615 552-31 0.002Up SK 615 552-32 0.002
SwedishBack SK 615 550-12 0.002Drift SK 615 550-15 0.002Fel SK 615 550-16 0.002Fram SK 615 550-18 0.002Framryckning SK 615 550-19 0.002Från SK 615 550-20 0.002Hög SK 615 550-27 0.002Höger SK 615 550-28 0.002In SK 615 550-29 0.002Låg SK 615 550-32 0.002Manöverspänning SK 615 550-33 0.002Minskar SK 615 550-34 0.002Ned SK 615 550-35 0.002Normal SK 615 550-37 0.002Nödstopp SK 615 550-38 0.002Prov SK 615 550-39 0.002Start SK 615 550-44 0.002Stopp SK 615 550-45 0.002Stänger SK 615 550-46 0.002Till SK 615 550-47 0.002Upp SK 615 550-48 0.002Ut SK 615 550-49 0.002Utlösning SK 615 550-50 0.002Vänster SK 615 550-51 0.002Återställning SK 615 550-52 0.002Ökar SK 615 550-53 0.002Öppnar SK 615 550-54 0.002
1) Text height 3 mm.
ABB 411SFC 261001-EN, Ed. 5
Silver-grey Silver-GreySymbol/text Aluminium Laminated plasticCentre Right Order Code Order Code Weight, kg
Engraved fixed legend plates, with symbols1)
O I SK 615 550-75 0.002I II SK 615 550-76 0.002 SK 615 562-72 0.002
Engraved fixed legend plates, with text1)
EnglishHand Auto SK 615 550-71 0.002Jog Run SK 615 552-52 0.002Off On SK 615 552-53 0.002Stop Start SK 615 552-55 0.002
SwedishFrån Till SK 615 550-70 0.002Hand Auto SK 615 550-71 0.002Låg Hög SK 615 550-72 0.002Prov Drift SK 615 550-73 0.002Stopp Start SK 615 550-74 0.002
Fixed legend plates with customer-selected text1)
Without headingH = 39 mm SK 615 999-1 SK 616 999-21 0.002
When ordering state (in addition to Cat. No.):– Centre text (max 5 characters)– Right text (max 5 characters)
With headingH = 44.5 mm SK 615 999-2 SK 616 999-22 0.002
When ordering state (in addition to Cat. No.):– Heading text (max. 11 characters)– Centre text (max. 5 characters)– Right text (max. 5 characters)
1) Text height 3 mm. Only the initial character is upper case unless other is stated.
H = 39 mm
H = 39 mm
H = 44.5 mm
AccessoriesLegend plates for two-position selector switches
42 ABB1SFC 261001-EN, Ed. 5
AccessoriesLegend plates for three-position selector switches
H = 39 mm
H = 39 mm
H = 44.5 mm
Silver-grey Silver-GreySymbol/text Aluminium Laminated plasticLeft Centre Right Order Code Order Code Weight, kg
Engraved fixed legend plates, with symbols1)
O SK 615 550-81 0.002O SK 615 562-82 0.002
O SK 615 562-83 0.002
Engraved fixed legend plates, with text1)
EnglishHand O Auto SK 615 550-80 0.002Slow Off Fast SK 615 552-60 0.002
SwedishHand O Auto SK 615 550-80 0.002
Fixed legend plates with customer-selected text1)
Without headingH = 39 mm SK 615 999-1 SK 616 999-21 0.002
When ordering state (in addition to Cat. No.):– Left text(max 5 characters)– Centre text (max 5 characters)– Right text (max 5 characters)
With headingH = 44.5 mm SK 615 999-2 SK 616 999-22 0.002
When ordering state (in addition to Cat. No.):– Heading text (max. 11 characters)– Left text (max. 5 characters)– Centre text (max. 5 characters)– Right text (max. 5 characters)
1) Text height 3 mm. Only the initial character is upper case unless other is stated.
ABB 431SFC 261001-EN, Ed. 5
AccessoriesLegend plates for toggle switches
Silver-grey Silver-GreyAluminium Laminated plastic
Text Order Code Order Code Weight, kg
Fixed legend plates with customer-selected text1)
Toggle switches, two positionsTwo text linesH = 39 mm SK 615 999-3 0.002
When ordering state (in addition to Cat. No.):– Upper text (max. 4 characters)– Lower text (max. 4 characters)
Two text linesH = 44,5 mm SK 615 999-4 0.002
When ordering state (in addition to Cat. No.):– Upper text (max. 6 characters)– Lower text (max. 6 characters)
Fixed legend plates with customer-selected text1)
Toggle switches, three positionsThree text linesH = 39 mm SK 615 999-3 SK 616 999-23 0.002
When ordering state (in addition to Cat. No.):– Upper text (max. 4 characters)– Middle text (max. 3 characters)– Lower text (max. 4 characters)
Three text linesH = 44,5 mm SK 615 999-4 SK 616 999-24 0.002
When ordering state (in addition to Cat. No.):– Upper text (max. 6 characters)– Middle text (max. 5 characters)– Lower text (max. 6 characters)
1) Text height 3 mm. Only the initial character is upper case unless other is stated.
44 ABB1SFC 261001-EN, Ed. 5
AccessoriesLegend plates for pushbuttons
H = 39 mm
H = 44.5 mm
Silver-greyAluminium
Text Order Code Weight, kg
Fixed legend plates (for pushbuttons, mushroom buttons and pilot lights)1)
Standard design without textFor 1-2 text linesH = 39 mm SK 615 540-1 0.002
For 2-3 text linesH = 44.5 mm SK 615 541-1 0.002
With customer-selected text1)
For 1 text lineH = 39 mm SK 615 999-1 0.002
For 2 text linesH = 44.5 mm SK 615 999-2 0.002
Black/whiteplastic
Symbol/Text Order code Weight, kg
Fixed legend platesOne side black and the other white. Engraving will give either white or black text.
Without textFor 1-2 text linesH = 39 mm SK 616 540-2 0.002
For 2-3 text linesH = 44.5 mm SK 616 541-2 0.002
1) Text height 3 mm. Only the initial character is upper case unless other is stated.
ABB 451SFC 261001-EN, Ed. 5
Text Order Code Weight, kg
Emergency stop legend plateBlack text on a yellow aluminium plate. Quantity per package: 10.
Nöd Stopp SK 615 546-1 0.010Emergency Stop SK 615 546-2 0.010Not Aus SK 615 546-3 0.010ARRET D'URGENCE SK 615 546-4 0.010HÄTÄSEIS SK 615 546-5 0.010PARADA DE EMERGENCIA SK 615 546-6 0.010
EMERGENCY STOPNOT AUSARRET D'URGENCE SK 615 546-13 0.010
Without text SK 615 546-8 0.010
Black text on a yellow plastic plate. Quantity per package: 10.Can be used as yellow background
Emergency Stop 1SFA 616 915 R1005 0.003
AccessoriesSpecial legend plates
Legend plate without or with customer-selected text
Aluminium.Number Max. numberof of characters Dimensions Without text 1) With text 2)operators per line A L C Order Code Order Code Weight, kg
1 7 - 29.6 23.6 SK 615 545-1 SK 615 998-1 0.0012 20 30.5 60 54 SK 615 545-2 SK 615 998-2 0.0012 24 40 70 64 SK 615 545-3 SK 615 998-3 0.0013 33 30.5 90 84 SK 615 545-4 SK 615 998-4 0.0013 42 40 110 104 SK 615 545-5 SK 615 998-5 0.001
1) Quantity per package: 10.2) When ordering state text and position (upper and lower line). Only the initial character is upper case unless other is
stated. Quantity per package: 1.
Legend plate for potentiometerAluminium. 29.6 x 44.5 mm
Design Text Order Code Weight, kg
Symbol plate SK 615 562-87 0.002
Scale 0 - 10 SK 615 562-88 0.002
Symbol plate29.6 x 44.5 mm
Scale 0-10
46 ABB1SFC 261001-EN, Ed. 5
AccessoriesText caps
Pilot light
Text/ Cap Flush button Extended button Pilot light WeightSymbol colour 1) Order Code Order Code Order Code kg
Text caps for illuminated pushbuttons and pilot lightsTill White 1SFA 616 901R2020 1SFA 616 902R2020 1SFA 616 903R2020 0.001
Från White 1SFA 616 901R2019 1SFA 616 902R2019 1SFA 616 903R2019 0.001
Start White 1SFA 616 901R2030 1SFA 616 902R2030 1SFA 616 903R2030 0.001
START Green 1SFA 616 906R1042 – – 0.001
Stopp White 1SFA 616 901R2031 1SFA 616 902R2031 1SFA 616 903R2031 0.001
R White 1SFA 616 901R2019 1SFA 616 902R2019 1SFA 616 903R2019 0.001Black 1SFA 616 908R9009 1SFA 616 909R9009 – 0.001
On White 1SFA 616 901R1020 1SFA 616 902R1020 1SFA 616 903R1020 0.001
ON White 1SFA 616 901R1039 – 1SFA 616 903R1039 0.001Green 1SFA 616 906R1039 – – 0.001Black 1SFA 616 908R1039 – – 0.001
Off White 1SFA 616 901R1019 1SFA 616 902R1019 1SFA 616 903R1019 0.001
OFF White – 1SFA 616 902R1040 – 0.001Red – 1SFA 616 905R1040 – 0.001Black – 1SFA 616 909R1040 – 0.001
Stop White 1SFA 616 901R1031 1SFA 616 902R1031 1SFA 616 903R1031 0.001
STOP Red 1SFA 616 904R1047 1SFA 616 905R1047 – 0.001
Reset White 1SFA 616 901R1025 1SFA 616 902R1025 1SFA 616 903R1025 0.001
Ein White 1SFA 616 901R6020 1SFA 616 902R6020 1SFA 616 903R6020 0.001
Aus White 1SFA 616 901R6019 1SFA 616 902R6019 1SFA 616 903R6019 0.001
Without text White 1SFA 616 901R9000 1SFA 616 902R9000 1SFA 616 903R9000 0.001
With customerselected text2) White 1SFA 616 901R9001 1SFA 616 902R9001 1SFA 616 903R9001 0.001
1) Use only white caps for illuminated pushbuttons and pilot lights
2) When ordering, please state text and position:- one line (middle), max. 6 characters.- two lines (upper and lower), max. 5 or 8 characters.Only the initial character is upper case unless other is stated.
Characters per lineOne line (line 11): max. 6Two lines:
upper (line 21): max. 5lower (line 22): max. 5
Flush or extended button
Can be turned 90°or 180°
Characters per lineOne line (line 11): max. 8Two lines:
upper (line 21): max. 8lower (line 22): max. 8
Recommended colour combinationsof text caps and actuatorsText cap colour Actuator Lens colour
White Pilot light All coloursWhite Illuminated pushbutton All colours
Green, Red, Non-illuminated pushbutton ClearBlack, White
ABB 471SFC 261001-EN, Ed. 5
Text/ Cap Flush button Extended button Pilot light WeightSymbol colour 1) Order Code Order Code Order Code kg
Text caps for illuminated pushbuttons and pilot lightsO White 1SFA 616 901R9004 1SFA 616 902R9004 1SFA 616 903R9004 0.001
Red 1SFA 616 904R9004 1SFA 616 905R9004 – 0.001Black 1SFA 616 908R9004 – – 0.001
I White 1SFA 616 901R9002 1SFA 616 902R9002 1SFA 616 903R9002 0.001Green 1SFA 616 906R9002 – – 0.001Black 1SFA 616 908R9002 – – 0.001
II White 1SFA 616 901R9003 1SFA 616 902R9003 1SFA 616 903R9003 0.001Green 1SFA 616 906R9003 – – 0.001Black 1SFA 616 908R9003 – – 0.001
III White 1SFA 616 901R9028 1SFA 616 902R9028 – 0.001Black 1SFA 616 908R9028 – – 0.001
+ White 1SFA 616 901R9011 1SFA 616 902R9011 – 0.001Green 1SFA 616 906R9011 – – 0.001Black 1SFA 616 908R9011 – – 0.001
– White 1SFA 616 901R9012 – – 0.001Red 1SFA 616 904R9012 – – 0.001Black 1SFA 616 908R9012 – – 0.001
White 1SFA 616 901R9005 1SFA 616 902R9005 1SFA 616 903R9005 0.001Black 1SFA 616 908R9005 – – 0.001
White 1SFA 616 901R9014 1SFA 616 902R9014 – 0.001Black 1SFA 616 908R9014 – – 0.001
White 1SFA 616 901R9015 1SFA 616 902R9015 – 0.001Black 1SFA 616 908R9015 – – 0.001
White 1SFA 616 901R9016 1SFA 616 902R9016 – 0.001Black 1SFA 616 908R9016 – – 0.001
White 1SFA 616 901R9017 1SFA 616 902R9017 – 0.001Black 1SFA 616 908R9017 – – 0.001
White 1SFA 616 901R9006 1SFA 616 902R9006 1SFA 616 903R9006 0.001
White 1SFA 616 901R9018 1SFA 616 902R9018 – 0.001Black 1SFA 616 908R9018 – – 0.001
White 1SFA 616 901R9019 1SFA 616 902R9019 – 0.001Black 1SFA 616 908R9019 – – 0.001
White 1SFA 616 901R9020 1SFA 616 902R9020 – 0.001Black 1SFA 616 908R9020 – – 0.001
White 1SFA 616 901R9021 1SFA 616 902R9021 – 0.001Black 1SFA 616 908R9021 – – 0.001
White 1SFA 616 901R9022 1SFA 616 902R9022 – 0.001Black 1SFA 616 908R9022 – – 0.001
White 1SFA 616 901R9023 1SFA 616 902R9023 – 0.001Black 1SFA 616 908R9023 – – 0.001
White 1SFA 616 901R9024 1SFA 616 902R9024 – 0.001Black 1SFA 616 908R9024 – – 0.001
White 1SFA 616 901R9025 1SFA 616 902R9025 – 0.001Black 1SFA 616 908R9025 – – 0.001
White 1SFA 616 901R9026 1SFA 616 902R9026 – 0.001Black 1SFA 616 908R9026 – – 0.001
White 1SFA 616 901R9027 1SFA 616 902R9027 – 0.001Black 1SFA 616 908R9027 – – 0.001
1) Use only white caps for illuminated pushbuttons and pilot lights.
AccessoriesText caps
Flush Extendedbutton button
Can be turned 90°or 180°
Pilot light
48 ABB1SFC 261001-EN, Ed. 5
AccessoriesSpecial legend plates
31
47
36
Text
Front Rear Order Code Weight, kg
Legend plates with insertsHolder of grey or black plastic.Insert of silver grey aluminium.The insert is securely retained in a pocket and can be removed.The inserts are available without text or with text on one or both sides.3 mm high text in typeface Helvetica.
Legend plate holdersGrey SK 615 564-1 0.002Black SK 615 564-8 0.002
InsertsWith text/symbols
O I SK 615 570-30 0.001SK 615 582-18 0.001
English Close Open SK 615 569-10 0.001 On Off SK 615 569-11 0.001 Fast Slow SK 615 569-12 0.001 Down Up SK 615 569-13 0.001 Emerg.stop Release SK 615 569-14 0.001
Cancel Reset SK 615 569-15 0.001 In Out SK 615 569-16 0.001 Lower Raise SK 615 569-17 0.001 Start Stop SK 615 569-18 0.001 Inching Jog SK 615 569-19 0.001
Run Full SK 615 569-20 0.001 Forward Reverse SK 615 569-21 0.001
SwedishAutom.regl Handregl. SK 615 570-10 0.001Fram Back SK 615 570-11 0.001Blockering Deblockering SK 615 570-12 0.001Drift Prov SK 615 570-13 0.001 Fel Normal SK 615 570-14 0.001
Fort Sakta SK 615 570-15 0.001 Framryckn. Man.-spänning SK 615 570-16 0.001Till Från SK 615 570-17 0.001 Full Klart SK 615 570-18 0.001 Nollställning Inställning SK 615 570-19 0.001
Hög Läg SK 615 570-20 0.001 Höger Vänster SK 615 570-21 0.001 In Ut SK 615 570-22 0.001Ökar Minskar SK 615 570-23 0.001Upp Ned SK 615 570-24 0.001
Nödstopp Snabbstopp SK 615 570-25 0.001 Sakta ned Sakta upp SK 615 570-26 0.001 Start Stopp SK 615 570-27 0.001 Stänger Öppnar SK 615 570-28 0.001 Utlösning Återställning SK 615 570-29 0.001
ABB 491SFC 261001-EN, Ed. 5
Front Rear Weight
Left Centre Right Left Centre Right Order Code kg
Inserts for two-position selector switches Holders – see page 56
Two position. Silver grey aluminium.
l l l SK 615 582-72 0.001
EnglishOff On Stop Start SK 615 569-30 0.001Low High Slow Fast SK 615 569-31 0.001Close Open Jog Run SK 615 569-32 0.001Hand Auto O l SK 615 570-51 0.001
Swedish
Från Till Stopp Start SK 615 570-50 0.001Hand Auto O l SK 615 570-51 0.001Låg Hög Prov Drift SK 615 570-52 0.001
Inserts for three-position selector switches Holders – see page 56
Three position. Silver grey aluminium.
O O SK 615 582-82 0.001
SwedishHand O Auto l O l l SK 615 569-70 0.001
EnglishHand O Auto l O l l SK 615 569-70 0.001Slow Off Fast – – – SK 615 569-71 0.001
Inserts with customer-selected text/symbols Holders – see page 56
Brushed aluminium on black plastic. Engraving on the aluminium side will give black text.
Without text SK 615 563-3 0.001With text SK 616 999-25 0.001
Silver-grey aluminium.
Without text SK 615 563-1 0.001With text SK 615 999-5 0.001
Plastic inserts with one side black and the other whiteEngraving will give either white or black text.
Without text SK 615 563-2 0.001
When ordering, please state: 1. Text (line 1, 11 or 12, max. 11 characters per line)2. Left (line 31, max. 5 characters per line)
Centre (line 21 or 32, max. 5 characters per line)Right (line 22 or 33, max. 5 characters per line)
3. Black or white side4. Note: Only the initial character will be upper case unless other is stated.
Plastic pocket with paper legend slipConsists of a pocket in which can be placed a typewritten or handwritten legend slip.
The plastic pocket is intended for insertion in the legend-plate holder. For indoor application.
Plastic pocket SK 615 548-1
Sheet of legend slip SK 615 548-21 sheet=50 legend slip
AccessoriesSpecial legend plates
For three-pos. selector switch
For two-pos. selector switch
For two-pos. selector switch
For three-pos. selector switch
50 ABB1SFC 261001-EN, Ed. 5
Order form – assembled stationsNon-metallic enclosures
Instructions for order form: Non-metallic enclosed pilot devices1. Number of enclosures Only one type of enclosure per order form. Specify quantity.
2. Enclosure size
The non-metallic enclosures are available in five different sizes, intended for 1 to 6 pushbuttons/pilotlights etc.Specify the number of seats, 1, 2, 3, 4 or 6.Contact blocks, lamp blocks and transformer blocks are snapped on to a built-in DIN rail in the base.In addition to the three positions for each seat, there is further space (=position 4) for using an extrablock. See the figure below.
Seat 1 Seat 2 Seat 3 Seat 4 Seat 5 Seat 6
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
3. Mode of mounting The non-metallic enclosures can be horizontally or vertically mounted. Mark the alternative of yourchoice with an X.For vertically mounted enclosures legend plates of height=39 mm can be used only. There are alsospecial selector switches available for vertical mounting. See page 30–31.
4. Operators Are selected according to page 6–22. Specify the order number for the required operator.
5.1 Contact block andlamp block Mark the required block with an X. N.B. Normally three markings per seat. Extra blocks in shaded box.
5.2 Transformer block
Put in X against your choice. Select according to page 36. Takes up three positions. Place a blankingplug on the mounting hole in the seat that is taken up by a transformer block. Enter the required codeletter in the sub-part of the order number.
6. Legend plates Fixed plates and caps can be selected with text according to the legend plate section, page 40–49, withengraved plates or customer-selected texts. Specify the order number only for catalogued options. Whenordering customised texts specify the engraving template and the required text for each line/position.N.B. It is not possible to provide double pushbuttons with legend plates. Instead the buttons can bemarked.
7. Accessories for non-metallic enclosuresSee page 29. Specify quantity and order number.
8. Accessories/Special requirementsSee page 37–38. N.B. filament bulbs, neon bulbs and LEDs are not included. They are to be orderedseparately. Specify quantity and order number.
12
43
21
43
21
65
12
1
3
Max. no. of blocks= 24 for 6-seat enclosure.
ABB 511SFC 261001-EN, Ed. 5
Ord
er fo
rm 1
SFC
161
03-5
5EN
CR
L/XM
990
217
Feel
free
to m
ake
copi
es o
f thi
s fo
rm. I
t mig
htco
me
in h
andy
at t
he n
ext o
rder
ing
occa
sion
.Non-metallic enclosed pilot devices Order formTo Ref. Date Rev.
From Order no.
Issuer, phone Customer
1. No. of enclosures....................in the design as below 2. Mode of mounting Horizontal Vertical
3. Enclosure size1-seat 2-seat 3-seat 4-seat 6-seat
SK 616 801-AA SK 616 802-AA SK 616 803-AA SK 616 804-AA SK 616 806-AA
4. Operators Seat 1 Seat 2 Seat 3 Seat 4 Seat 5 Seat 6
1SFA 616 1SFA 616 1SFA 616 1SFA 616 1SFA 616 1SFA 616See page 6...22 and 30...31. .................... ....................... ....................... ....................... ....................... .......................
5.1 Contact blocks, lamp blocks (for rear mounting) N.B. normally three blocks in all per seat.
Seat 1 Seat 2 Seat 3 Seat 4 Seat 5 Seat 6
Positions per seat 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Contact block SK 616 002-A
SK 616 002-B
Lamp blockSK 616 003-D
SK 616 003-E
SK 616 003-F
5.2 Transformer block N.B. A transformer block takes up three positions.SK 615 004-.......see page 36.
6. Legend plates Seat 1 Seat 2 Seat 3 Seat 4 Seat 5 Seat 6
Upright HorizontalNo. of characters per field ( )
Fixed plates 1)
Engraving template, see below Text Heading 1(11)
Heading 2(11)
Left (5) Upper (4)
Centre (5) Centre (3)
Right (5) Lower (4)
Caps with charactersText 1 line (6)*)
2 lines Upper (5)*)
Lower (5)*)
7. Accessories for non-metallic enclosures See page 29. 8. Accessories/Special requirements See page 37.
Qty .... Cable gland, incl. nut
.... Earthing device
Engraving template A B 2) C D 2) E F 2) G H
1) Silver-grey. Brushed aluminium on black plastic. Yellow for EMERGENCY STOP. 2) Only for enclosures horizontally mounted.
= disposable seat for extra blockMax. 3+1 block/seat
Fixed plate for: Pushbutton, pilot lights Selector switch Selector switch Toggle Toggle Caps withmushroom pushbutton 2-positions 3-positions 2-positions 3-positions 1- or 2-line
text
*) (8) for pilot light
KCB-10B
KCB-01B
KLB-1B
KLB-2B
KLB-3B
52 ABB1SFC 261001-EN, Ed. 5
Instructions for order form: Metal-enclosed pilot devices1. Number of enclosures Only one type of enclosure per order form. Specify quantity.
2. Enclosure size
The metal enclosures are available in five different sizes, intended for 1 to 6 pushbuttons/pilot lights etc.Specify the number of seats, 1, 2, 3, 4 or 6.Contact blocks, lamp blocks and transformer blocks are front mounted. 5-block holder can be used.
3. Operators Are selected according to page 6-22. Specify the order number for the required operator.
4.1 Contact block andlamp block Mark the required block with an X. N.B. Normally three markings per seat.
4.2 Transformer block
Put in X against your choice. Select according to page 36. Takes up three positions. Place a blankingplug on the mounting hole in the seat that is taken up by a transformer block. Enter the required codeletter in the sub-part of the order number.
5. Legend plates Fixed plates and caps can be selected with text according to the legend plate section's options withengraved plates or customer-selected texts. Specify the order number only for catalogued options.When ordering customised texts specify the engraving template and the required text for each line/position. N.B. It is not possible to provide double pushbuttons with legend plates. Instead the buttonscan be marked.
6. Accessories for metal-enclosuresSee page 33. Specify quantity and order number.
7. Accessories/Special requirementsSee page 37–38. N.B. filament bulbs, neon bulbs and LEDs are not included. They are to be orderedseparately. Specify quantity and order number.
Order form – assembled stationsMetallic enclosures
12
12 3 2
13
214
64
35
ABB 531SFC 261001-EN, Ed. 5
Feel
free
to m
ake
copi
es o
f thi
s fo
rm. I
t mig
htco
me
in h
andy
at t
he n
ext o
rder
ing
occa
sion
.O
rder
form
1S
FC 1
6103
-57E
N C
RL/
XM 9
9021
7
*)(8) for pilot light
Fixed plates for: Pushbutton, pilot lights Selector switches Selector switches Toggle Toggle Caps withmushroom pushbutton 2-positions 3-positions 2-positions 3-positions 1- or 2-line
text
1) Silver-grey. Brushed aluminium on black plastic. Yellow for EMERGENCY STOP. 2) Only for enclosures horizontally mounted.
Engraving template A B2) C D 2) E F 2) G H
Metal-enclosed pilot devices Order formTo Ref. Date Rev.
From Order no.
Issuer, phone Customer
1. No. of enclosures....................in the design as below
2. Enclosure size1-seat 2-seat 3-seat 4-seat 6-seat
SK 616 701-AA SK 616 702-AA SK 616 703-AA SK 616 704-AA SK 616 706-AA
3. Operators Seat 1 Seat 2 Seat 3 Seat 4 Seat 5 Seat 6
1SFA 616 1SFA 616 1SFA 616 1SFA 616 1SFA 616 1SFA 616See page 6...22. ........................ ....................... ....................... ....................... ....................... .......................
4.1 Contact block, lamp block (for front mounting) N.B. Max. three blocks in all per seat with 3-block holders..
Seat 1 Seat 2 Seat 3 Seat 4 Seat 5 Seat 6
Position 3-block holder 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
Contact block SK 616 001-A
SK 616 001-B
Lamp blockSK 616 003-A
SK 616 003-B
SK 616 003-C
4.2 Transformer block N.B. A transformer block takes up three positions.SK 615 004-.......see page 36.
5. Legend plates Seat 1 Seat 2 Seat 3 Seat 4 Seat 5 Seat 6
Upright HorizontalNo. of characters per field( )
Fixed plates 1)
Engraving template, see below Text Heading 1(11)
Heading 2(11)
Left (5) Upper (4)
Centre (5) Centre (3)
Right (5) Lower (4)
Caps with charactersText 1 line (6)*)
2 lines Upper (5)*)
Lower (5)*)
6. Accessories for metal enclosures See page 33. 7. Accessories/Special requirements See page 37-38.
Qty .... Cable gland, incl. nut
.... Earthing device
.... Cover plate with n no. of bushings
KCB -01
KCB -10
KLB -2
KLB -1
KLB -3
54 ABB1SFC 261001-EN, Ed. 5
Technical data
ApprovalsThe pushbuttons, selector switches and pilot lights are approved by:– national approval agencies: UL*) , CSA*) and China Compulsory
Product Certification*)
– marine classification: Lloyds, Bureau Veritas, Det Norske Veritas,Germanische Lloyd, Registro Italiano Navale and Maritime Register ofShipping (Russia).
*) For detail information please contact ABB
StandardsIEC 73, 529, 947-5-1, 947-5-5EN 50 013, 60 947-5-1UL 508CSA C22.2 No. 14
Degrees of protectionOperatorsPushbutton with flush or extended button IP 66Mushroom pushbutton, momentary IP 66Mushroom pushbutton, maintained IP 54Emergency stop pushbutton IP 66Double pushbutton IP 54Reset button IP 64Lockable pushbutton andlockable mushroom pushbutton IP 43Selector switch IP 66Key operated selector switch IP 54Toggle switch IP 43Pilot lights IP 66Buzzer IP 65Potentiometer IP 66Signal Tower K70 IP 54Signal Beacons IP 65
Electrical functionsContact block and transformer block IP 20
EnclosuresPolycarbonate enclosures (Non-metallic) IP 65
Light-alloy enclosures (Metallic)(with sealing membrane) IP 67
Material and characteristicsNo ozone depleting substances in the products.
Material1)
PC PSU PA PBT Zink Light- Rubberalloy Chloro- Nitrile
prene
Pushbutton
Double pushbutton - - - -
Mushroom pushbutton,momentary - - - maintained - - - - -
Emergency stop - - -
Potentiometer - - - - -
Selector switch - - - -
Toggle switch - - - - -
Pilot light - - - - -
Lock in lockable operators - - - - - - -
Non-metallic enclosure - - - - - -
Metallic enclosure - - - - - -
1) Material Characteristics
PC Polycarbonate High impact strength, good outdoor resis-tance. Can withstand light acid solutions,aliphatic hydrocarbons, paraffin, alcohols,animal and vegetable greases.
PSU Polysulphone Can withstand high temperatures, acids,basic solutions, alkaline compounds,oils, alcohols.
PA Polyamide Can withstand high temperatures, ali-phatic, aromatic and chlorinated hydro-carbons, esters, ketone-aldehydes,alcohols and basic solutions.
PBT Can withstand temperature, aliphatic andaromatic hydrocarbons, acids, basicsolutions, alcohols, grease and oils
Zinc Good corrosion resistance in inland-,sea and industrial atmosphere.
Light-alloy Good corrosion resistance in inland-,sea and industrial atmosphere.
A003248
ABB 551SFC 261001-EN, Ed. 5
Technical data
Mechanical lifeOperatorsPushbuttons with flush or extended button,momentary mushroom pushbutton 2 million operations
Selector switch, maintained mushroom push-button, key operated selector switch anddouble pushbutton 0.5 million operations
Emergency stop pushbutton 0.1 million operations
Toggle switch 1 million operations
Lockable pushbuttons 0.3 million operations
TemperatureAmbient temperature during operation -25 to +70 °C
Exception: All pilot devices with 2 Wcontinuously lit filament bulb -25 to +40 °C
Storage temperature -30 to +85 °C
TerminalsPlus-minus pozidrive size 2 screw with DIN-washer.
Connectable area min. 1 x 0,5 mm2
max. 2 x 2,5 mm2
Recommended torque 0,9 Nm
Contact blocksMechanical endurance 10 million operations
Self cleaning contacts of silver, NC contact has forced breaking.At voltages and currents below 24 V and 5.6 mA two contact blocks inparallel are recommended. As an alternative, gold plated contacts arerecommended.
Ratings as per UL/CSA, NEMA A 600, Q600Rated insulation voltage 600 VRated thermal current 10 ARated operational current at 120 V 6 A
240 V 3 A480 V 1.5 A600 V 1.2 A
Ratings as per IEC 947-5-1Rated insulation voltage, Ui 690 VRated thermal current, Ith 10 ARated operational current, Ieutilisation category AC 15, at 120 V 8 A
230 V 6 A400 V 4 A690 V 2 A
Rated operational current, Ieutilisation category DC 13, at 24 V 5 A
125 V 1.1 A250 V 0.55 A
Contact resistance 25 mΩMax. number of contact blocks per operator 1)
Pushbutton, toggle switch 6Mushroom pushbutton 5Double pushbutton, selector switch andkey operated selector switch, emergencystop pushbutton 4
1) The contact blocks can be stacked in max. two levels.
Short circuit protectionMax. fuse at 1 kA 16 A ordinary
10 A delayed
Lamp blockRatings as per IEC 947-5-1Rated insulation voltage 230 VBase Ba 9sMax. permissible power 2 W
Service life of filament bulbRelative service life, luminous flux and power consumptionat different service voltages.It is generally true to say that bulbs for lower voltages give more light andhave better vibration-withstand capability than bulbs for higher voltages.
Lamp comparisation
Bulb Approx. Shock and High Low power Brightnesstype service vibration operating consumption
life (hours) immunity temperature
Filament 5000–10 000 + + + +++
LED 25 000–50 000 +++ ++ ++ ++
Very good +++Good ++Less good +
Ud/Um
Service life
a = service life (H)b = luminous flux (lm)c = power (W)Ud = service voltage, VUm= bulb voltage (V)
Transformer blockSuitable for filament bulb 6 or 24 V AC and 1.2 W and LED 24 V.
Rated power 1.5 W
Rated voltage Ratio, seeAccessories page 36
Rated insulation voltage acc. to IEC70 °C (∆T) Class E
Lens colours suitable for:Filamentbulbs LEDs
Red Green Yellow Blue White Clear
56 ABB1SFC 261001-EN, Ed. 5
Dimensions
Pushbutton Key-lockable pushbutton Mushroom pushbutton
Flush
Extended
Double pushbutton Selector switch
Key-operated selector switch Toggle switch
Pilot light
Ø29
Pilot light with transformer
Dimensions in mm.
23 1,5-6
56
R29
43
30 25,5
Ø40
25,5
Ø60Ø29
Ø29
Emergency Stop pushbutton
Compact Pilot Light
Potentiometer
ABB 571SFC 261001-EN, Ed. 5
Drilling plans for pushbuttons,switches and pilot lights
1) 55 mm when legend plate H= 44.5 mm is used.61 mm for mushroom pushbutton with D=60 mm
2) 37 mm when legend plate with insert is used,
Drilling plan fordouble pushbutton
Transformer block
30 5
29
50
90
1)
30 302)
Buzzer
Dimensions
Drilling plan for 30 mm adaptor
Mounting on a DIN-rail
Reset pushbutton
1) Length of stroke.2) Can be cut to desired length.
58 ABB1SFC 261001-EN, Ed. 5
Dimensions
Signal Tower K 70
ø 70
184
240
296
352
408
85
ø 70
56
15
PG 11
Rubberseal
43
ø 70
15°
ø 4.2
ø 5.5
54
32
PG 1146
54
ø 70
ø 10.5
ø 5.5
110
ø 25
ø 70
69
Drilling plan for Signal Tower K 70
Contact box for cable exit at side
Base with integrated tube
Contact box with magnetic base
70
Bracket 1-sided mounting
Bracket 2-sided mounting
Base for tube, plastic
Base for tube, metal
Audible module
Dimensions in mm.
54
ABB 591SFC 261001-EN, Ed. 5
ø 75Pg29 (ø 37)
7 16
32
ø 68
64.5
Pull reliefScrew terminalM3
39
22
3
Signal Beacons K SB Drilling plan for Signal Beacons
Dimensions
60 ABB1SFC 261001-EN, Ed. 5
Enclosures, non-metallic1 seat
4 seats
Enclosures, metallic1 seat 2 or 3 seats 4 or 6 seats
2) Both sides identical. Knock-outs, D = 22.5 or 28.61) Knock-outs in the bottom
1)
3 seats
1)2)
2 seats
1)
2)1)1)
6 seats
Dimensions in mm.
Ø 4.8 (2x)Ø 4.8 (2x) Ø 4.8 (2x)
Ø 4.8 (2x)Ø 4.8 (2x) 23.6
Dimensions
Dimensions in mm.
ABB 611SFC 261001-EN, Ed. 5
ArgentinaBoliviaBrazil
CanadaChili
ColombiaEcuador
El SalvadorMexico
PeruUruguay
USAVenezuela
For a complete information,please consult
the ABB Website.
62 ABB1SFC 261001-EN, Ed. 5
AustriaBelgiumBulgariaCroatia
Czech RepublicDenmark
FinlandFrance
GermanyGreece
HungaryIcelandIreland
ItalyLithuania
LuxembourgNetherlands
NorwayPoland
PortugalRomania
RussiaSlovenia
SpainSweden
SwitzerlandTurkey
United Kingdom
Local Contact For LV Products
Link to Local Products Website For non listed countries, please use the nearest Sales Contact.
Your partner in the Americas
Your partner in Europe
www.abb.com/lowvoltage left menu: "Low Voltage On-Line" select: "Contact Us"
ABB 631SFC 261001-EN, Ed. 5
Local Contact For LV Products
Link to Local Products Website For non listed countries, please use the nearest Sales Contact.
For a complete information,please consult
the ABB Website.
Your partner in Middle East and Africa
Your partner in the AsiaAustralia
ChinaIndia
IndonesiaJapan
MalaysiaPhilippinesSingapore
South KoreaTaiwan
Thailand
AlgeriaDubaiEgypt
EthiopiaIran
IsraelIvory Coast
JordanKenya
KuwaitLebanonMorocco
NigeriaSaudi ArabiaSouth Africa
SyriaTanzania
TunisiaZimbabwe
www.abb.com/lowvoltage left menu: "Low Voltage On-Line" select: "Contact Us"
64 ABB1SFC 261001-EN, Ed. 5
Colour selection
Colour selection according to IEC 73, edition 4, 1991
IEC 73 specifies colours for pushbuttons and pilot lights and givesrecommendations regarding the use of colours. An excerpt from thestandards is given below.
PushbuttonsEmergency, even in combination with Off, is to be RED.
Stop and Off can be white, grey or black, with preference for BLACK. Red is also allowed.
Start and On can be white, grey or black, with preference for WHITE. Green is also allowed.
Start and stop in combination can be white, grey or black. Yellow, green or red must not be used.
Reset is to be blue, white, grey or black, with preference for BLUE.
Reset with stop function can be white, grey or black, with preference for BLACK. Red is also allowed.
Illuminated pushbuttonsThe red colour of Emergency must be on the operator itself and is not to be dependent on transmitted light.For other functions, see Pushbuttons. When in doubt, use white (neutral).
Pilot lightsPilot lights are to be given colours according to the table above. When in doubt, use white (neutral).
Colour Pushbutton/Meaning Pilot lights/Meaning
RED Emergency Emergency or dangerMeasures required in emergency situations
YELLOW Abnormal. Abnormal or warningMeasures required in abnormal situations
GREEN Safety Normal or safetyMeasure to normalize or secure the situation
BLUE Prescribed Prescribed or obligatory
WHITE, GREY, No special meaning prescribed No special meaning prescribedBLACK
ABB 651SFC 261001-EN, Ed. 5
Order Code Page Order Code Page
2154 373 382949 1725 384950 512 37
5911 086 365912 019 375396 0543 29
5396 0562 276880 311 37
1SFA 616 070 24071 – 079 25080, 087 26
100 – 103 6, 7110 – 116 11124 – 125 12
130 – 137 8, 9141 – 148 8, 10147 – 148 8, 10
160 – 163 27200 – 205 16, 18210 – 217 17, 19
220 – 222 30230 – 232 31280 – 287 20
300 – 302 21400 – 402 22410 15
500, 501, 504 13510, 511, 513, 514 14600 22, 35
SK 615 564 48569, 570, 582 48, 49998 45
999 41, 42, 43, 44
SK 616 001 35002 29003 29, 35
007 35008 29009 36
013 35021 38204 27
404 27502 29, 33503 38
540, 541 44590 29701 – 704, 706 32
801 – 804, 806 28999 41, 42, 43, 49
Order Code Page
Type Page
CL 22KA70 25KASB 26KASI 25KB 22KB70 25KCB 29, 35KCBH 22, 35KCBHS 14KDB 36KEM 32KEP 28KL 22KL70 24KLB 29, 35KP 6 - 7
Index of Cat. Nos.
Type Page
KPD 8 - 10KPK 11KPM.-... 12KPMT.-..., KPMK.-...,KPMP.-... 13, 14KS70 25KSB 26K2SS.-... 16, 18K3SS.-... 17, 19K2SSK.-..., K3SSK.-... 20K2SSV.-... 30K3SSV.-... 31KT 15KT70 25KTS 21
1SFA 616 605 14811 – 813 34821, 831 34
901 – 909 46, 47915 45920 22, 27, 29, 38
921 37922 26923 – 924 25
950 36
1SFA 619 402 22
SK 170 4536 337685, 7686, 7687 33
SK 172 105 33
SK 175 919 33923 29931 29
0152, 0182 33
SK 615 017 29502, 512 38516 29
540 – 541 44545, 546 45548 49
550, 552 40, 41, 42562 40, 41, 42, 45563 49
66 ABB1SFC 261001-EN, Ed. 5
PK Pushbutton, Key-lockable2SSK 2-pos. Selector Switch, Key-lockable3SSK 3-pos. Selector Switch, Key-lockable
Key code :1 = 712 = 723 = 73
K= "Generation" K
Explanation of type codes
Explanation of type codeBuzzers, contact blocks, lamp blocks, siren, Signal Beacons etc
Example 1: Type K CBH-1110
Pilot lights, Signal TowersExample 2: Type K L1-100R
OperatorsExample 3: Type K PM1-10Y
Example 4: Type K 2SSK1-10
B BuzzerCB Contact BlockCBH Contact Block with HolderLB Lamp Block
S70 Siren (to K70)SB Signal BeaconA70 Accessories to K70ASI AS-Interface Module to K70
Lens colour:R = Red W = WhiteG = Green B = BlackY = Yellow C = ClearL = Blue U = Grey
L1 Pilot Light Head
L70 Light element K70
P PushbuttonPD Pushbutton, DoublePK Pushbutton, Key-lockablePM Pushbutton, MushroomPMT Pushbutton, Mushroom, Twist releasePMK Pushbutton, Mushroom, Key-lockablePMP Pushbutton, Mushroom, Pull release2SS 2-pos. Selector Switch3SS 3-pos. Selector SwitchT PotentiometerTS Toggle Switch
Button colour/Lens colour for double pushbuttonsR = Red W= WhiteG = Green B = BlackY = Yellow C = ClearY = Blue U = Grey