Download - Presentation (truss) by imran khan
![Page 1: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/1.jpg)
DEPARTMENT OF CIVIL ENGINEERING
UNIVERSITY OF INFORMATION TECHNOLOGY &
SCIENCES
![Page 2: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/2.jpg)
CE 302
Structural Analysis & Design Lab 1
![Page 3: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/3.jpg)
A Presentation Of Civil Engineering Department
Group 3 of Civil Dept. 2014 teamwork
An outlook on
Frame &Truss Analysis
![Page 4: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/4.jpg)
PREPARED BY
MD. IMRAN HOSSAIN (ID:12310177)
![Page 5: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/5.jpg)
FRAME
![Page 6: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/6.jpg)
DEFINITION OF FRAME
A-Frame is a basic structure designed to bear a load in a light weight economical manner.
A frame is a structural system that supports other components of a physical construction.
Multi forced members are generally known as Frames.
Frames are commonly used to support various external loads.
![Page 7: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/7.jpg)
FRAME
![Page 8: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/8.jpg)
FRAME
![Page 9: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/9.jpg)
ANALYSIS OF FRAME
A free body diagram of the complete frame is used to determine the external forces acting on the frame.
Internal forces are determined by dismembering the frame and creating free-body diagrams for each component.
![Page 10: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/10.jpg)
TRUSS
![Page 11: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/11.jpg)
WHAT IS TRUSS ?A truss is a structure comprising one or more triangular units constructed
with straight members whose ends are connected at joints or nodes. If all the bars lie in a plane, the structure is a planar truss.The main parts of a planar truss.
TRUSS ANALYSIS
In other words, Trusses are designed to form a stable structure.
![Page 12: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/12.jpg)
TRUSS ANALYSIS
Following characteristics of Truss* The members of the truss should be in a plane.
* Members are connected at their intersections by means of frictionless pins or hinge.
* Loads and reactions are applied only at joint.
* The centroid of the members must coincide with centroid of the joints.
![Page 13: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/13.jpg)
Truss Members The members which from the outline or perimeter of a truss are
generally called the chord members.
There are two chord members -
01. Top Chord: Top members
02. Bottom Chord: Bottom members
Web Members – The interior members connecting the joints of the chords are called the web members.
There are two members-
01. Diagonal members
02. Vertical members
TRUSS ANALYSIS
![Page 14: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/14.jpg)
TRUSS ANALYSIS
Why are trusses strong?
Trusses derive their strength from the triangle.
The simplest of plane polygons, a triangle is unique in
that it is defined by the length of its sides. That is, one
and only one triangle can be drawn if the length of all
three sides is given.
![Page 15: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/15.jpg)
TRUSS ANALYSIS
Why are triangles used in trusses? Rectangles and squares are not very strong
because the middle of each side would tend to bend or buckle easily. And these are not used in truss.
A truss is a structure made up of triangles. Because triangles are strong because when you define the length of the three sides the relationship between the nodes is fixed. Similarly when you identify any two angles an a side or two sides and a common angle all other properties are fixed. In any other shape there are more degrees of rigidity required to create a fixed structure.
Triangles have sides that reinforce each other. They divide up the load.
![Page 16: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/16.jpg)
TRUSS ANALYSISApplication of trusses-
Roof of factory shade. Ware house Railway platform Garage shed transmission towers Crane truss Bridge Truss Sport Stadium Truss
![Page 17: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/17.jpg)
TRUSS ANALYSIS
![Page 18: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/18.jpg)
TRUSS ANALYSIS
![Page 19: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/19.jpg)
TRUSS ANALYSIS
![Page 20: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/20.jpg)
TRUSS ANALYSIS
![Page 21: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/21.jpg)
TRUSS ANALYSIS
![Page 22: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/22.jpg)
TRUSS ANALYSIS
Joint Method
Determine the Support
Reaction.
Apply Fx = 0 and Fy = 0 to
every node and determine
member force
Dismember the truss and create
a free-body diagram for each
member and pin.
METHOD OF TRUSS ANALYSIS
![Page 23: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/23.jpg)
TRUSS ANALYSIS
SECTI ON METHOD
Determine the Support Reaction.
To determine the force in member
BD, pass a section through the truss
as shown and create a free body
diagram for the left side.
With only three members cut by the
section, the equations for static
equilibrium may be applied to
determine the unknown member
forces, including FBD.
METHOD OF TRUSS ANALYSIS
![Page 24: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/24.jpg)
TRUSS ANALYSIS
Comparison of Trusses and Frames
Trusses Frames
Members are subjected to tension/compression only
At least one member is subjected to bending, shear or torsion
Forces are applied at the joints only.
Forces may act anywhere on the member.
Member does not bend. Members may bend/may not bend.
Composed of rods. Composed of bars.
Used for large loads. Used for small and medium loads.
![Page 25: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/25.jpg)
TRUSS ANALYSIS
Advantages of Truss & Frame
Cost Effective.
Can be installed quickly even without heavy equipment to lift it into place
Unique properties of a triangular object allow trusses to span across longer distances
![Page 26: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/26.jpg)
TRUSS ANALYSIS
Common Types of Trusses-
King post & Queen post Truss.
Warren Truss.
Howe Truss.
Pratt Truss.
English Truss.
K- Truss.
Baltimore Truss.
Continuous Truss.
Bowstring Truss.
![Page 27: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/27.jpg)
TRUSS ANALYSIS
Also known as Crescent Truss
Is a truss consisting of curved top chord meeting bottom chord at each end.
Has diagonal load-bearing members.
Often confused with tied arch bridges
Bowstring Truss-
![Page 28: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/28.jpg)
TRUSS ANALYSIS
King post It is used for simple short-span
bridges.
Fewest number off truss members.- two diagonal members, kingpost braces, that meet at the apex of the truss, one horizontal beam and the king post which connect the apex to the horizontal beam below.
King post & Queen Post Truss-
![Page 29: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/29.jpg)
TRUSS ANALYSIS
Queen post It has two vertical post.
Very strong and stable.
It´s more stable and can support a wider span than a kingpost.
King post & Queen Post Truss-
![Page 30: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/30.jpg)
TRUSS ANALYSIS
It uses equilateral triangles to spread out the loads on the bridges. The equilateral triangles minimize the forces to only compression and tension.
This bridges are often used with verticals to reduce the panel size.
Warren Truss-
![Page 31: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/31.jpg)
TRUSS ANALYSIS
It became very popular and was considered one of the best designs for railroad bridges back in the day.
Wooden beams for the diagonal members, which were in compression. It used iron (and later steel) for the vertical members, which were in tension.
Howe Truss-
![Page 32: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/32.jpg)
TRUSS ANALYSIS
![Page 33: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/33.jpg)
TRUSS ANALYSIS
Very common type but has many variations (Baltimore, Pennsylvania, and the Parker)
The basic identifying features are the diagonal web members which form a V-shape. (Howe truss bridge has a A-shape).
Commonly used for supporting railways.
The Pratt truss’s verticals functioned as compression members and diagonals functioned as tension members.
The Pratt truss required more iron than a Howe truss,
Pratt Truss-
![Page 34: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/34.jpg)
TRUSS ANALYSIS
![Page 35: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/35.jpg)
TRUSS ANALYSIS
The length of members undergoing compression is reduced. This reduction in length enables components of bridges to endure the compressional force.
The design is complicated and it is considered to be one of the
hardest bridges to build.
K- Truss-
![Page 36: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/36.jpg)
TRUSS ANALYSIS
![Page 37: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/37.jpg)
TRUSS ANALYSIS
Roof Truss- Roof trusses, which are
structural components of houses or commercial buildings, support the weight of roof timbers and coverings.
Usually, they are constructed from pieces of timber or steel which are nailed, bolted, or pegged together to form a mutually supporting and strong base for a roof.
![Page 38: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/38.jpg)
TRUSS ANALYSIS
![Page 39: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/39.jpg)
TRUSS ANALYSISDesign of industrial roof truss: Steps of work
1. Selection of truss type.
2. Estimation of loads.
3. Analysis & design of purlin.
4. Analysis & design of sag rod.
5. Dead load(DL) and Wind load(WL) analysis
of truss member.
6. Combination of DL and WL to determine
the design bar forces.
7.Design of member according to the bar forces.
8.Design of bracing system.
9.Design of connection.
10.Detailing.
![Page 40: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/40.jpg)
TRUSS ANALYSIS
We will design a Industrial roof truss
![Page 41: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/41.jpg)
TRUSS ANALYSIS
Design of Purlin Then calculating of purlin number and Purlin
spacing. Then load analysis-
01. Dead load analysis.
02.live load analysis. Then we find out member force by grasp
software. Bracing design-
01. Top chord bracing.
02. Bottom chord bracing.
03. Vertical bracing.
![Page 42: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/42.jpg)
TRUSS ANALYSIS
Types of Truss Connection- 01. Pinned Connection.
![Page 43: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/43.jpg)
TRUSS ANALYSIS
Types of Truss Connection-
02. Gusset plate Connection.
![Page 44: Presentation (truss) by imran khan](https://reader033.vdocuments.net/reader033/viewer/2022061220/54bbd2aa4a7959fa3d8b45d5/html5/thumbnails/44.jpg)