Process for Main Software Upgrade

Press keys on remote in below Sequence

Switch Off and On the Set from Mains Supply Steps for copying Main Software in USB: 1). Extract the files from the rar file "SW-30 june2012-010F signed image" and copy the files in root file of USB. 2). Folder Files available in rar files : Videocon (for VIDEOCON models) or Sansui (for Sansui models) 3). Copy this folder in the root folder of USB.4). Switch ON the Set and go to design data by pressing "Menu then in Audio Option" and then 8532.5). Go to the "set up" option and make "M-Mode" ON.6). Insert the USB in the set in OFF condition.7). Now Switch ON the set from the mains and press below mentioned remote sequence with 1st time LED glow (nearly after 3 sec from mains ON time)

After Powering On Press the Buttons on Remote Sequence in Standby mode

Set in Standby Mode

“Power” Key

Navigation “Up” Key

Navigation “Down” Key

Navigation “Down” Key

Process for Main Software Upgrade

Software Upgrade through E2P Will Start Software Upgrade Completed successfully

Electric Socket

Power Cable

Switch Off and On the Set from Mains Supply Release Set from Standby mode