Product Brochure
Reliable.Powerful.Trusted.RF and Microwave Instruments
2 | RF and Microwave Testing Solutions
Spectrum Analyzer
Model Frequency RBW Noise Level Key Features
MS2717BMS2718BMS2719B
9 kHz to 7.1 GHz9 kHz to 13 GHz9 kHz to 20 GHz
1 Hz to 3 MHz –153 dBm typical to 1 GHz
n Typical dynamic range of 100 dBn Typical phase noise of –110 dBc/Hz at 10 kHz
offsets up to 6 GHzn RF and demodulator measurement capabilities
with pass/fail functionsn 13 software options for wireless measurements
from GSM to Mobile WiMAX
MS2690AMS2691AMS2692ASignal Analyzer
50 Hz to 6.0 GHz50 Hz to 13.5 GHz50 Hz to 26.5 GHz
Spectrum Analyzer Mode 30 Hz to 20 MHzSignal Analyzer Mode 1 Hz to 1 MHz
Down to –155 dBm (option and frequency dependent)
n World class dynamic rangen 125 MHz analysis bandwidthn Excellent accuracy of level and modulation
analysis up 6 GHzn Excellent accuracy of level and modulation
analysis up 6 GHzn High speed modulation analysisn Supports GSM/EDGE/EDGE evolution, HSPA,
LTE, Mobile WiMAX, and WLAN
MS8608ADigitalMobile Radio TransmitterTester
9 kHz to 7.8 GHz
1 Hz to 20 MHz Down to –146.5 dBm (option and frequency dependent)
n Excellent performance for evaluating W-CDMA modulation signals
n Supports GSM/EDGE, HSDPA, WLAN/802.11, CDMA, 1xEVDO, and Pi/4DQPSK (PHS, PDC, IS–136) measurements
n Resolution bandwidth of up to 20 MHz via built-in spectrum analyzer
n Power can be measured with an accuracy of ± 0.4 dB using the power sensor
MS8609A DigitalMobile Radio TransmitterTester
9 kHz to 13.2 GHz
MS2830A-040 9 kHz to 3.6 GHz
Spectrum Analyzer Mode 1 Hz to 31.25 MHzSignal Analyzer Mode 1 Hz to 1 MHz
Down to –153 dBm(option and frequency dependent)
n Top-class spectrum analyzer measurement speed
n Supports ± 0.3 dB (typical) total level accuracy
n Spectrum analyzer supporting built-in signal generator and modulation analysis
n Supports 3GPP LTE FDD, 3GPP LTE TDD (TD-LTE), GSM/EDGE/EDGE evolution, Mobile WiMAX, WLAN
MS2830A-041 9 kHz to 6 GHz
MS2830A-043 9 kHz to 13.5 GHz
MS2830A-044 9 kHz to 26.5 GHz
n 9 kHz to 26.5/43 GHz frequency range; 43 GHz max. built-in pre-amp option
n Best-of-class wide dynamic range over 6 GHzn 110 GHz max. frequency range; built-in 1st local
signal output for external mixern For wideband down-converter; built-in 1 GHz IF
output bandn Analysis bandwidth options (signal analyzer and
modulation analysis functions)
MS2830A-045 9 kHz to 43 GHz
Spectrum Analyzer Mode 1 Hz to 10 MHzSignal Analyzer Mode 1 Hz to 1 MHz
Spectrum Analyzers 4Take a closer look at Anritsu Spectrum Analyzers at www.anritsu.com
2 | RF and Microwave Testing Solutions RF and Microwave Testing Solutions | 3
Spectrum AnalyzersSuperior performance. Advanced capabilities. Affordable pricing. The Anritsu family of spectrum analyzers delivers high frequency/level accuracies and a broad set of smart, intuitive features—including models with built-in one-button measurements.
Take advantage of a large selection of optionsto handle a wider range of applications at a reasonable cost.
MS2719B
4Take a closer look at Anritsu Spectrum Analyzers at www.anritsu.com
4 | RF and Microwave Testing Solutions
Vector Network Analyzers
Vector Network Analyzer Features Benefits Applications
VectorStar® Family Microwave and mmWave VNA
ME7838A 70 kHz to 110 GHz
MS4640A Series70 kHz to 70 GHz
MS4642A Series70 kHz/10 MHz to 20 GHz
MS4644A Series70 kHz/10 MHz to 40 GHz
MS4645A Series70 kHz/10 MHz to 50 GHz
MS4647A Series70 kHz/10 MHz to 70 GHz
Broadest frequency span from a single coaxial test port covering 70 kHz to 70 GHz in a single instrument and 70 kHz to 110 GHz in the Broadband configuration
n Obtain the most thorough and accurate broadband device characterization.
n Eliminate time consuming concatenation process across the RF, microwave/mm-wave bands.
n Decrease test instrument expenses by eliminating the need for a 2nd RF VNA.
n Reduce the risk of DC extrapolation errors in your device modeling.
n Device characterization
n Microwave and millimeter wave component test
n On-wafer
n Waveguide S-parameters
n R&D and production environments
n Mixer measurements including automatic de-embedded measurements with absolute phase and group delay
n Embed/De-embed applications
n Amplifier testing
n Broadband characterization
n Parameter extraction
n Device modeling
Fastest swept synthesized measurement speed < 20 µsec per point
n Increase manufacturing revenue by increasing throughput.
n Quickly and easily spot the most hard to find failures and reduce the risk of shipping defective products.
Superior Dynamic Range – up to 140 dB
n Accurately measure medium and high loss devices.
n Catch all potential filter feed-throughs in out-of-band regions.
High compression point – up to15 dBm at 70 GHz
n Eliminate the need for additional attenuators.
n Improve calibration and measurement accuracy.
Best test port characteristic – up to 50 dB Directivity, Source Match, Load Match
n Reduce measurement uncertaintyn Reduce measurement guard bandsn Improve productivityn Optimum precision in R&D
Highest point resolution – 100,000 points
n Zoom in on narrow band responses without re-calibration.
Best device modeling datan Accelerate design cyclen Accurate DC modelingn Eliminate the need for 2nd VNA
Best time domain analysis
n 100,000 points provide the most accurate, highest resolved, Low Pass Mode measurements.
n Measure long transmission lines with the best non-aliasing range.
Most convenient automatic calibration system with best accuracy
n Use Precision AutoCal for an easy, one-button method of VNA calibration and better accuracy than traditional SOLT calibration.
n Spend less time setting up the VNA for the next production run.
Lightning™ Family Microwave and mmwave VNA40 MHz to 20, 40, 67 GHz
n Best performance to price ration Excellent dynamic range and test port characteristics provide accurate,
reliable measurements.n Many of the advanced high performance features found in VectorStar
including; wide range of calibration choices, AutoCal, Embedding/De-embedding, multiple source control, and power meter correction.
n Passive devicesn Active devicesn Mixersn E/O and O/En On-wafer
RF and Microwave Testing Solutions | 5
4Take a closer look at Anritsu Vector Network Analyzers at www.anritsu.com
Vector Network AnalyzersAnritsu VNAs encompass a wide range of high-performance, component test tools designed to address the growing needs of wireless, satellite, defense, broad-band communication and optoelectronic components markets. Choose between the VectorStar® and Lightning™ family of VNAs for the ideal solution of advanced performance, accuracy and reliability for measuring any active or passive device or system – from characterization and designing to manufacturing and verification.
The versatility tocompletely characterize
wireless components and systems.
37397E
MS4647A VectorStar® VNA
Power Measurements | Signal Analyzers
Power Meters and Power SensorsAnritsu power meters and USB power sensors provide accurate measurements for the full range of communications, wireless and aerospace applications.
The preferred choice of service providers,network operators and contractors worldwide.
MA24126A
Power Meter Frequency VBW Dynamic Range ( dBm) Channels
ML2437A Power Meter 10 MHz to 65 GHz Sensor dependent 100 kHz –70 dBm to +20 dBm
Sensor dependent1
ML2438A Power Meter 2
ML2487B Wideband Peak Power Meter 50 MHz to 18 GHzSensor dependent 20 MHz –70 dBm to +20 dBm
Sensor dependent2
ML2488B Wideband Peak Power Meter 2
ML2495A Pulse Power Meter 100 kHz to 65 GHz Sensor dependent 65 MHz –70 dBm to +20 dBm
Sensor dependent1
ML2496A Pulse Power Meter 2
Power Sensor Frequency Bandwidth Dynamic Range ( dBm)
MA24108A Microwave USB Power Sensor 10 MHz to 8 GHz
50 kHz, Typical –40 dBm to +20 dBmMA24118A Microwave USB Power Sensor 10 MHz to 18 GHz
MA24126A Microwave USB Power Sensor 10 MHz to 26 GHz
MA24106A USB Power Sensor 50 MHz to 6 GHz 100 Hz, Typical –40 dBm to +23 dBm
MA24104A Inline High Power Sensor 600 MHz to 4 GHz 100 Hz, Typical 2 mW to 150 mW
Signal AnalyzersTechnicians looking for exceptional engineering insight for advanced RF and communications products need to look no further. Anritsu Signal Analyzers offer cost-effective solutions with integrated Fixed and Mobile WiMAX measurements, industry-best DANL and dynamic range and comprehensive W-CDMA/HSDPA measurements.
Signal Analyzer Frequency RBW Noise Level Key Features
MS2690AMS2691AMS2692A
50 Hz to 6.0 GHz50 Hz to 13.5 GHz50 Hz to 26.5 GHz
Signal Analyzer Mode1 Hz to 1 MHzSpectrum Analyzer Mode30 Hz to 20 MHz
Down to –155 dBm (option and frequency dependent)
n World class dynamic rangen 125 MHz analysis bandwidthn Excellent accuracy of level and modulation analysis up 6 GHzn Excellent accuracy of level and modulation analysis up 6 GHzn High speed modulation analysisn Supports GSM/EDGE/EDGE evolution, HSPA, LTE, Mobile
WiMAX, and WLAN
MS2830A-040 9 kHz to 3.6 GHz
Spectrum Analyzer Mode 1 Hz to 31.25 MHzSignal Analyzer Mode 1 Hz to 1 MHz Down to –153 dBm
(option and frequency dependent)
n Top-class spectrum analyzer measurement speedn Supports ± 0.3 dB (typical) total level accuracyn Spectrum analyzer supporting built-in signal generator and
modulation analysisn Supports 3GPP LTE FDD, 3GPP LTE TDD (TD-LTE),
GSM/EDGE/EDGE evolution, Mobile WiMAX, WLAN
MS2830A-041 9 kHz to 6 GHz
MS2830A-043 9 kHz to 13.5 GHz
MS2830A-044 9 kHz to 26.5 GHz
n 9 kHz to 26.5/43 GHz frequency range; 43 GHz max. built-in pre-amp option
n Best-of-class wide dynamic range over 6 GHzn 110 GHz max. frequency range; built-in 1st local signal output
for external mixern For wideband down-converter; built-in 1 GHz IF output bandn Analysis bandwidth options (signal analyzer and modulation
analysis functions)
MS2830A-045 9 kHz to 43 GHz
Spectrum Analyzer Mode 1 Hz to 10 MHzSignal Analyzer Mode 1 Hz to 1 MHz
MS2690A
6 | RF and Microwave Testing Solutions
Synthesized Signal Generators
Signal Generator Frequency Range Key Features Key Applications
MG3641A Synthesized Signal Generator 125 kHz to 1040 MHz n 0.01 Hz resolution
n –100 dBc non-harmonic spurious
n Radio receiver interference testingn On-site maintenancen R&D
MG3642A Synthesized Signal Generator 125 kHz to 2080 MHz n 0.01 Hz resolution
n –100 dBc non-harmonic spurious
n Radio receiver interference testingn On-site maintenancen R&D
MG3690C Series RF/Microwave Signal Generator
0.1 Hz to 70 GHz/325 GHz and greater
n High-performancen High-output powern Ultra-low phase noisen Analog/Pulse modulation
n Microwave communicationsn Aerospace/defensen Applications signal simulationn Manufacturing ATE systems
MG37020A Fast Switching Microwave Signal Generator 10 MHz to 20 GHz
n Fast Switching Speedn High-output powern Low phase noise n Pulse modulation
n Microwave communicationsn Aerospace/defensen Applications signal simulationn Manufacturing ATE systems
MG3700A Vector Signal Generator
250 kHz to 3 GHz (6 GHz option)
n 160 MHz arbitrary waveform generator yields high-level accuracy and large capacity baseband memory
n Digital modulation of signals for all major wireless communication systems
Synthesized Signal GeneratorsWhether you test in the microwave, fixed or mobile satellite communications or defense industries, Anritsu provides the best synthesized signal generator solutions. With high-signal purity, low noise and excellent frequency stability, our signal generators are a fundamental measuring instrument for your lab or manufacturing site. Choose instruments with a full range of modulation capabilities for signal simulations from simple to the most complex, including Amplitude (AM), Frequency (FM), Phase (φ) and Pulse (PM). Plus, you’ll find a series of configurable and upgradable broadband high-performance signal generators that meet your exact specifications.
Anritsu provides the bestsynthesized signal generator solutions.
MG3690C
RF and Microwave Testing Solutions | 7
8 | RF and Microwave Testing Solutions
Handheld Solutions
Delivering benchtop performancein a handheld instrument.
Handheld Cable and Antenna Analyzer: Site Master™
As powerful as it is easy to use, more field technicians choose Site Master than any other handheld analyzer. And for applications such as broadcast TV/FM, paging, Land Mobile Radio, cellular, GPS, PCS/GSM, LTE, HSPA/UMTS, WLAN and WiMAX – Site Master delivers accurate, repeatable measurements.
Site Master Frequency Measurements
S311D Cable and Antenna Analyzer 25 MHz to 1600 MHz n Return Loss
n Cable Loss
n SWR
n Distance-To-FaultS331D Cable and Antenna Analyzer 25 MHz to 4000 MHz
S332E Cable, Antenna and Spectrum Analyzer
2 MHz to 4000 MHz cable and antenna analyzer,100 kHz to 4 GHz spectrum analyzer
n Return Loss
n SWR
n Cable Loss
n Distance-To-Fault
n Adjacent Channel Power Ratio
n P25 / NXDN / DMR Analyzer and BER Coverage Mapping (S412E only)
n Channel Power
n Field strength
n Interference Analysis
n Occupied Bandwidth
n Transmission Measurement
n Coverage Mapping
S362E Cable and Antenna Analyzer 2 MHz to 6000 MHz cable and antenna analyzer,100 kHz to 6 GHz spectrum analyzer
S412E Cable and Antenna, Spectrum, Land Mobile Radio Analyzer with Signal Generator
500 kHz to 1.6 GHz cable and antenna analyzer100 kHz to 1.6 GHz spectrum analyzerOptional extension to 6 GHz
S810D Broadband Microwave Transmission Line andAntenna Analyzer
2 MHz to 10.5 GHz n Return Loss
n 1-port Cable Loss
n Distance-To-Fault
n 2-port Cable Loss
n Coax and waveguide VSWRS820D Broadband Microwave Transmission Line andAntenna Analyzer
2 MHz to 20 GHz
Don’t let their size fool you.
These rugged, lightweight
and easy-to-use instruments
deliver powerful, field-tested,
lab-approved reliability
and accuracy to the palm
of your hand — and to
wherever there’s microwave
or communication
systems issues. S332E
RF and Microwave Testing Solutions | 9
4Take hold of handheld Anritsu solutions. See more at www.anritsu.com
Handheld Base Station Analyzers: BTS Master™ and Cell Master™
BTS Master is like having multiple tools in one compact instrument. You get the functionality of a transmitter analyzer (3GPP, 3GPP2, WiMAX and more), cable and antenna analyzer, backhaul analyzer, plus all the features of the field-proven Spectrum Master.Cell Master eliminates the need to carry, manage and learn multiple test sets. It includes a transmitter analyzer (3GPP, 3GPP2, WiMAX and more), a transmission analyzer for 2-port devices, interference analyzer, channel scanner, GPS receiver, CW signal generator (tests LNAs, repeaters or base station receiver sensitivity) and T1/E1 analyzer.
Base Station Analyzer Frequency Measurements
MT8221B and MT8222B BTS Master
400 MHz to 4 GHz (MT8221B)400 MHz to 6 GHz (MT8222B)(Built-in cable and antenna analyzer)
150 kHz to 7.1 GHz (Built-in spectrum analyzer)
10 MHz to 7.1 GHz (Built-in power meter)
n Return Loss/VSWRn Cable/Insertion Lossn Distance-To-Faultn Channel Powern Occupied Bandwidthn Carrier-to-Interferencen Field Strengthn Adjacent Channel Power Ration Emission Maskn Signal Strengthn RSSI
n LTE, FDD and TDD up to 20 MHzn W-CDMA/HSPA+n GSM/EDGEn TD-SCDMA/HSPA+n CDMA, EV-DOn WiMAX, Fixed and Mobilen PIM/Distance-to-PIM™n Coverage mappingn E1, T1, T3n Vector signal generatorn IQ waveform capture, IF Output
MT8212E and MT8213E Cell Master
2 MHz to 4 GHz (MT8212E)2 MHz to 6 GHz (MT8213E)(Built-in cable and antenna analyzer)
100 kHz to 4 GHz (MT8212E)100 kHz to 6 GHz (MT8213E)(Built-in spectrum analyzer)
10 MHz to 4 GHz (MT8212E)10 MHz to 6 GHz (MT8213E)(Built-in power meter)
n Return Loss/VSWRn Cable/Insertion Lossn Distance-To-Faultn Channel Powern Occupied Bandwidthn Carrier-to-Interferencen Field Strengthn Adjacent Channel Power Ration Emission Maskn Signal Strengthn RSSI
n LTE, FDD and TDD up to 10 MHzn W-CDMA/HSPA+n GSM/EDGEn TD-SCDMA/HSPA+n CDMA, EV-DOn WiMAX, Fixed and Mobilen PIM/Distance-to-PIM™n Coverage mappingn E1, T1, T3n ISDB-Tn DVB-T/H
MT8212E
RF and Microwave Testing Solutions | 9
MT8222B
Quickly and e asily perform all measurements for wireless network deployment, installation and maintenance.
10 | RF and Microwave Testing Solutions
Spectrum AnalyzerHandheld Solutions
Handheld Spectrum Analyzers: Spectrum Master™
As the de facto industry standard, the Spectrum Master series provides ultimate measurement flexibility in a lightweight, rugged package for field environments and mobile applications. With frequencies ranging from 9 kHz to 43 GHz, the Spectrum Master is ideal for such applications as identifying sources of interference, measuring field strength of cellular, satellite and military land mobile signals, field analysis of 802.11a/b/g wireless LAN signals and measurement of LTE signals and RF output from circuits, devices and instruments.
Handheld Vector Network Analyzers: VNA Master™
Need unparalleled performance and essential RF capabilities at modest prices? Enter the VNA Master series–simply the most advanced ultra-portable handheld VNAs on the market.
VNA Master VNA Frequency SPA Frequency Measurements
MS2024B 500 kHz to 4 GHz — n Return Loss n Real/Imag Impedancen VSWR n Distance domainn Phase n Smith chartn Group delay n Distance-To-FaultMS2025B 500 kHz to 6 GHz —
MS2034B 500 kHz to 4 GHz 100 kHz to 4 GHz MS202xB measurements plus: n High-performance spectrum analysisn Channel scannern Interference analysisMS2035B 500 kHz to 6 GHz 100 kHz to 6 GHz
MS2026C 5 kHz to 6 GHz — n Return Loss n Real/Imag Impedancen VSWR n Time or Distance domainn Phase n Smith chartn Group delay n Distance-To-FaultMS2028C 5 kHz to 20 GHz —
MS2036C 5 kHz to 6 GHz 9 kHz to 9 GHz MS202xC measurements plus: n High-performance spectrum analysisn Channel scannern Interference analysisMS2038C 5 kHz to 20 GHz 9 kHz to 20 GHz
Spectrum Master Frequency RBW Noise Level (dBm)
MS2711E 100 kHz to 3 GHz 100 Hz to 3 MHz -142 dBm in 100 Hz RBW
MS2712E 100 kHz to 4 GHz10 Hz to 3 MHz
-152 dBm in 10 Hz RBW
MS2713E 100 kHz to 6 GHz -152 dBm in 10 Hz RBW
MS2721B 9 kHz to 7.1 GHz 1 Hz to 3 MHz –163 dBm typical to 1 GHz in 1 Hz RBW, preamp on
MS2722C 9 kHz to 9 GHz
1 Hz to 10 MHz
–160 dBm @ 1 GHz in 1 Hz RBW, preamp on
MS2723C 9 kHz to 13 GHz –156 dBm @ 9 GHz in 1 Hz RBW, preamp on
MS2724C 9 kHz to 20 GHz –145 dBm @ 20 GHz in 1 Hz RBW, preamp on
MS2725C 9 kHz to 32 GHz –154 dBm @ 32 GHz in 1 Hz RBW, preamp on
MS2726C 9 kHz to 43 GHz –147 dBm @ 40 GHz in 1 Hz RBW, preamp on
MS2721B
MS2038C
Specialized Products
Frequency CountersAnritsu’s frequency counters provide the most comprehensive frequency measurements in the industry.
Frequency Counter Frequency Key Features Key Applications
MF2400 Microwave Frequency Counter 10 Hz to 20/27/40 GHz
n Wideband measurementn High-accuracy burst measurementn Analog display functionn Template functionn High-speed transient measurementn Gating function
n Mobile radio communications devices and circuits
n Carrier frequency and pulse width of burst signal
Instrumentation Grade AttenuatorsHighly accurate, versatile and economical, Anritsu Instrumentation Grade Attenuators also provide GPIB standard and feature automatic measuring system components.
Grade Attenuators Frequency Key Features Key Applications
MN63A/65A/72A/64BProgrammable Attenuator DC to 18 GHz
n Wide frequency rangen High accuracyn Long operating lifen High-speed switching
n R&Dn Inspectionn Production
Precision Components, Precision MeasurementsTechnicians rely on Anritsu for industry-leading design and production of precision microwave components.n Precision coaxial connector systems to 110 GHz n Precision coaxial and waveguide to coax adaptersn High-directivity SWR auto testers and bridges n RF detectorsn Precision terminations and air lines n Precision fixed attenuatorsn Precision step attenuators n Precision power dividers and splittersn Precision bias tees n Broadband microwave limiters
RF and Microwave Testing Solutions | 11
Please Contact:
Catalog No. 11410-00415, Rev. D Printed in United States 2011-09 ©2011 Anritsu Company. All Rights Reserved
® Anritsu All trademarks are registered trademarks of their respective companies. Data subject to change without notice. For the most recent specifications visit: www.anritsu.com
Anritsu Corporation5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 JapanPhone: +81-46-223-1111Fax: +81-46-296-1238
• U.S.A.Anritsu Company1155 East Collins Boulevard, Suite 100,Richardson, TX, 75081 U.S.A.Toll Free: 1-800-ANRITSU (267-4878)Phone: +1-972-644-1777Fax: +1-972-671-1877• CanadaAnritsu Electronics Ltd.700 Silver Seven Road, Suite 120, Kanata,Ontario K2V 1C3, CanadaPhone: +1-613-591-2003Fax: +1-613-591-1006
• BrazilAnritsu Electrônica Ltda.Praça Amadeu Amaral, 27 - 1 Andar01327-010 - Bela Vista - São Paulo - SP - BrasilPhone: +55-11-3283-2511Fax: +55-11-3288-6940
• MexicoAnritsu Company, S.A. de C.V.Av. Ejército Nacional No. 579 Piso 9, Col. Granada11520 México, D.F., MéxicoPhone: +52-55-1101-2370Fax: +52-55-5254-3147
• U.K.Anritsu EMEA Ltd.200 Capability Green, Luton, Bedfordshire LU1 3LU, U.K.Phone: +44-1582-433280Fax: +44-1582-731303
• FranceAnritsu S.A.12 Avenue du Québec, Bâtiment Iris 1-Silic 638,91140 VILLEBON SUR YVETTE, FrancePhone: +33-1-60-92-15-50Fax: +33-1-64-46-10-65
• GermanyAnritsu GmbHNemetschek Haus, Konrad-Zuse-Platz 1 81829 München, GermanyPhone: +49 (0) 89 442308-0Fax: +49 (0) 89 442308-55
• ItalyAnritsu S.p.A.Via Elio Vittorini, 129, 00144 Roma, ItalyPhone: +39-06-509-9711Fax: +39-06-502-2425
• SwedenAnritsu ABBorgafjordsgatan 13, 164 40 KISTA, SwedenPhone: +46-8-534-707-00Fax: +46-8-534-707-30
• FinlandAnritsu ABTeknobulevardi 3-5, FI-01530 VANTAA, FinlandPhone: +358-20-741-8100Fax: +358-20-741-8111
• DenmarkAnritsu A/S (for Service Assurance)Anritsu AB (for Test & Measurement)Kirkebjerg Allé 90 DK-2605 Brøndby, DenmarkPhone: +45-7211-2200Fax: +45-7211-2210
• RussiaAnritsu EMEA Ltd. Representation Office in RussiaTverskaya str. 16/2, bld. 1, 7th floor.Russia, 125009, MoscowPhone: +7-495-363-1694Fax: +7-495-935-8962
• United Arab EmiratesAnritsu EMEA Ltd.Dubai Liaison OfficeP O Box 500413 - Dubai Internet CityAl Thuraya Building, Tower 1, Suite 701, 7th FloorDubai, United Arab EmiratesPhone: +971-4-3670352Fax: +971-4-3688460
• SingaporeAnritsu Pte. Ltd.60 Alexandra Terrace, #02-08, The Comtech (Lobby A)Singapore 118502Phone: +65-6282-2400Fax: +65-6282-2533
• IndiaAnritsu Pte. Ltd. India Branch Office3rd Floor, Shri Lakshminarayan Niwas, #2726, 80 ft Road, HAL 3rd Stage, Bangalore - 560 075, IndiaPhone: +91-80-4058-1300Fax: +91-80-4058-1301
• P. R. China (Hong Kong)Anritsu Company Ltd.Units 4 & 5, 28th Floor, Greenfield Tower, Conco rdia Plaza, No. 1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong, P.R. ChinaPhone: +852-2301-4980Fax: +852-2301-3545
• P. R. China (Beijing)Anritsu Company Ltd.Beijing Representative OfficeRoom 2008, Beijing Fortune Building, No. 5 , Dong-San-Huan Bei Road,Chao-Yang District, Beijing 100004, P.R. ChinaPhone: +86-10-6590-9230Fax: +86-10-6590-9235
• KoreaAnritsu Corporation, Ltd.8F Hyunjuk Bldg. 832-41, Yeoksam-Dong,Kangnam-ku, Seoul, 135-080, KoreaPhone: +82-2-553-6603Fax: +82-2-553-6604
• AustraliaAnritsu Pty Ltd.Unit 21/270 Ferntree Gully Road, Notting HillVictoria, 3168, AustraliaPhone: +61-3-9558-8177Fax: +61-3-9558-8255
• TaiwanAnritsu Company Inc.7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, TaiwanPhone: +886-2-8751-1816Fax: +886-2-8751-1817