Download - Products Catalogue - Minisite
azienda certificataISO 9001:2008
ProductsCatalogueCleaning and Self-cleaning FiltersDosing SystemsChemicals and Testing Kits
Treating water is
useful and convenient
What’s the water like?
IPX64
Visit our web site:www.acquabrevetti95.it/eng
Since over 20 years Acqua Brevetti 95 is engaged in the design and
manufacturing of patented systems for the purification of water both
for civilian and for industrial use. This background makes Acqua
Brevetti the benchmark company in Italy for domestic filtration and
polyphosphate dosage.
Today Acqua Brevetti supply high quality devices for every need in
the field of: protection filtration, scaling and corrosion prevention,
central heating system treatment.
20 years of experience and a slim organization format have produced
in our company the perfect mix of tradition and flexibility to be
“S.M.A.R.T.” in the market business.
Our service to the customers is distinguished by offering a wide-range
consulting in water treatment devices choosing and the possibility to
indicate and provides devices customized on your specific needs.
Index
1 Cleaning and self-cleaning filters BravoCALOR pag. 6 Bravo pag. 9 MiniBRAVO pag. 12 BravoDUE pag. 15 PuliFIL pag. 18 PuliMATIC pag. 21 BravoFIL pag. 24 BravoFIL PLUS pag. 27 BravoMATIC pag. 30 BravoMAX M pag. 33 BravoMAX A pag. 36
2 Water softener BravoCAB pag. 40
3 Dosing systems MiniDUE pag. 44 MiniDOS pag. 47 BravaDOS pag. 50 Diaphragm electronic pumps pag. 53 DosaNET C pag. 54 BravoTHERM 500 pag. 55 BravoTHERM 600 650 pag. 57 BravoPROMAX 30 SUPAFLUSH pag. 60 Bravo SOLAR PUMP pag. 61
4 Chemicals and testing kits AcquaSIL 2/15® pag. 63 AcquaSIL 20/40® pag. 64 AcquaSIL 5/10 pag. 65 Practical guide for AZ® products use pag. 66 AZ® 1000 pag. 68 AZ® 2000 pag. 69 AZ® 3000 pag. 70 AZ® 4000 pag. 71 AZ® 5000 pag. 72 AZ® 6000 pag. 73 AZ® 7000 pag. 74 AZ® BIOCLEAN pag. 75 BC 100 pag. 76 BC 200 pag. 77 BC 300 pag. 78 Kits and tools for water analisys pag. 79
Cleaning and self-cleaning filtersClear like wellspring waterPart of impurities commonly found in waters consist of sand, flakes of oxides and coarse mate-rial. They can cause serious troubles to equipments and plants, if not properly removed from the flow of water. Installation of a protection filter is the most simple and effective way to avoid such problems. Cleaning and self cleaning filters are advanced versions of cartridge filters and are designed specifically for protection of equipments.
All our filters are simple, efficient, small, compact and easy to use products, guaranteeing, as well as water impurities elimination, the complete filtering cartridge cleaning. Filtering cartridges are made of stainless steel, a material that allows to be washed without disassembling the filter itself.
All models have simple and efficient cleaning systems, which ensure the long-life of the device. According to the model, the washing can be carried out manually or completely automatically by a timer or by a differential pressure switch. The standard cartridges filtration degree is 89 Micron and we can supply every filtration degree required.Every device and planting solution are realized strictly in compliance with latest technical norms standards in force.
The Acqua Brevetti filters may be used for the protection of:- Central hot and cold water distribution plant- Heating and cooling systems- Process water distribution systems- Steam generators
1 Cleaning and self-cleaning filters
6
Manual filters - residential
BravoCALORCleaning filter
Overview
Often in water are present impurities as sands, rust flakes, incrustation residues that could damage sanitary systems (pipes, valves, mixers etc.). The installation of a protecting filter is the easier and more effective solution to avoid such problems.Furthermore, the filtration is indispensable for the protection of closed loop heating circuits where, during the time, could form slurries, flakes oxides and residues able to obstruct and damage static and shifting parts of appliances.BravoCALOR is a cleaning protective filter of compact size, completely made in brass, suitable both for hot and cold water applications. BravoCALOR is equipped with stainless steel cartridge with a filtration rating of 89 microns (drinkable water) or 500 microns (hot water applications).BravoCALOR is available also with pressure gauge version, which allows to control the pressure value.The cleaning of the cartridge is of easy execution, simply requiring the opening of the discharge tap on the bottom. For a more careful cleaning of the cartridge it is sufficient to put the filter in by-pass, open the bowl, extract the filtering element and put it to a more adequate cleaning cycle. BravoCALOR works with temperature up to 90°C and pressures of 16 bar.BravoCALOR, thanks to its high speed discharge system guarantee, as well as the discharge of the suspended impurities of the water, an efficient cleaning of the filtering cartridge.
Key features Compact dimension Suitable for hot water Completely made in brass
Application BravoCALOR has been specifically realized for the filtration of drinkable water cold and hot in both domestic than technologic applications. BravoCALOR could be employed for the protection of cold sanitary systems networks, cold and hot closed loop circuits, heating circuits, feeding of cooling and heating systems, process water networks.
Steinless Steel Cartridge Available with pressure gauge Completely made in Italy
E
D
A
C
B
E
B
C
D
A
7
Manual filters - residentialBravoCALOR - performances and technical data
CODE FT200 FT202 FT204 FT210 FT212 FT214 FT220 FT222 FT224 FT230 FT232 FT234
CONNECTIONS inches ½” F ¾” F 1” F ½”F ¾”F 1”F ½”F ¾”F 1”F ½”F ¾”F 1”F
NOMINAL FLOW RATE lt/h 1800 3200 4800 1800 3200 4800 1800 3200 4800 1800 3200 4800
HEAD LOSS AT MAXIMUM FLOW RATE bar 0.2
STANDARD FILTRATION RATING micr. 500 89
MIN. WORKING PRESSURE bar 1.5
MAX WORKING PRESSURE bar 16
MIN./MAX WATER TEMPERATURE °C 5/90
PRESSURE GAUGE 0-25 BAR YES NO YES NO
BravoCALOR Filter
da FT200/204 e FT220/224 da FT210/214 e FT230/234
Text per offer Cleaning filter BravoCALOR (specify the model) of compact size completely made in brass for water filtration, employed for the removal of foreign bodies both for sanitary systems and closed loop circuit with hot water (up to 90°C). Manual cleaning through the discharge valve opening.
DIMENSIONI D’INGOMBROQUOTES
CODE FT200 FT202 FT204 FT210 FT212 FT214 FT220 FT222 FT224 FT230 FT232 FT234
WIDTH (A) mm 80 80 80 80 80 80 80 80 80 80 80 80
CONNECTION HEIGHT (B) mm 132 132 132 132 132 132 132 132 132 132 132 132
TOTAL HEIGHT (C) mm 205 205 205 160 160 160 205 205 205 160 160 160
MINIMUM HEIGHT FROM GROUND (D) mm 300 300 300 300 300 300 300 300 300 300 300 300
DEPTH (E) mm 71 71 71 71 71 71 71 71 71 71 71 71
1 Cleaning and self-cleaning filters
8
Legenda1. Cold water inlet 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. Filter BravoCALOR; 9. Cold water outlet; 10. Discharge.
Installation scheme
10
16
20014
12
86
100
0
20
50
4
230
150
12345678
32
465
7
568
9
1010
ACQUA BREVETTI
100
810
200
150
0 230
16
14
12
6
0
50
4
2
1
Referential EU norms and EN standardsBravoCALOR is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12, Standards UNI EN 13443:1 2007. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to do-mestic water, heating and cooling plants. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
Manual filters - residential
9
Manual filters - residential
Bravo Cleaning filter
Overview
Bravo is an high-reliability product in the field of civil filtration. It is simply composed of three pieces, each one made of the best materials available in the market, to assure maximum resistance to pressure and corrosion: bar moulded brass head, bowl in Trogramid® with build-in drainage tap, and cartridge in stainless steel AISI 304 with double o-ring sealing. The particular structure of the filtering cartridge makes it resistant to mechanical shocks and pressure gradients eliminating deformation and crushing of the filtering cartridge.Thanks to high-velocity discharge, Bravo guarantees the removal of dirty accumulated and a complete cleaning of the cartridge. The cleaning operation is easy and quick, requiring only the opening of the discharge valve for sufficient time to make the complete removal of dirt from the bowl.
Key features Compact dimension High flow rate Pressure gauge (if requested) Resistance to high pressure Discharge tap
Application Point of entry of main water into the buildings, hot water circuits, farming and gardening.Part of impurities commonly found in waters consist of sand, flakes of oxides and coarse material can cause serious troubles to equipments and plants, if not properly removed from the flow of water: installation of a protection filter is the most simple and effective way to avoid such problems.In case of drinkable water is treated, current national laws on drinkable water quality and on quality of materials in contact with food must be followed.
Stainless steel cartridge No need of cartridge replacing Entirely made with the best materials Completely Made In Italy
1 Cleaning and self-cleaning filters
10
* Other filtration ratings available on demand: 50 micron. Included: filter opening key and brush for cartridge clean.
Bravo - performances and technical data
CODE FT300 FT310 FT302 FT312 FT304 FT314
CONNECTIONS inches ½”F ½”F ¾”F ¾”F 1”F 1”F
PRESSURE GAUGE NO YES NO YES NO YES
NOMINAL FLOW RATE lt/h 2400 2400 4200 4200 5100 5100
PRESSURE GAUGE SCALE bar - 1,5-12 - 1,5-12 - 1,5-12
ΔP (nominal flow rate) bar 0,2
STANDARD FILTRATION RATING* micr. 89
MIN. WORKING PRESSURE bar 1,5
MAX. WORKING PRESSURE bar 12
MIN./MAX WATER TEMPERATURE °C 5/30
MIN./MAX EXTERNAL TEMPERATURE °C 5/30
HEAD MATERIAL BRASS
BOWL MATERIAL TROGAMID
CARTRIDGE MATERIAL AISI304 STAINLESS STEEL
Bravo Filter
FT300, FT302, FT304 FT310, FT312, FT314
QUOTES
CODE FT300 FT302 FT304 FT310 FT312 FT314
WIDTH (A) mm 80 80 80 80 80 80
CONNECTION HEIGHT (B) mm 197 197 197 197 197 197
TOTAL HEIGHT (C) mm 225 225 225 270 270 270
MINIMUM HEIGHT FROM GROUND (D) mm 300 300 300 300 300 300
DEPTH (E) mm 71 71 71 71 71 71
D
BC
A EE
B
C
D
A
Manual filters - residential
810
150100
124
6
160
230
200
0142
50
150
230
4
50
02
0
100
68
12
14200
16
10
12345678
ACQUA BREVETTI
11
Referential EU norms and EN standardsBravo is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12, Standards UNI EN 13443:1 2007. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to domestic water, heating and cooling plants. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
Text per offer Cleaning filter Bravo – (specify the model) – is suitable for filtering water, eliminating suspended particles, such as: sand, silt, metal particles, etc. up to 89 microns rating. The filter is suitable to protect domestic supplies, hydro-thermo-sanitary plants and equipments in general. Equipped with pressure gauge ABS 0-12 scale bar for viewing the pressure in line. Product is suitable for treating drinking water for domestic use (visit our web site for further information).
Installation scheme
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. Bravo Filter; 9. Treated water outlet; 10. Discharge.
Manual filters - residential
Bravo filters are equipped with a special swap for cartridge clean and a green key to open the filter, simply turning the vase.
Cartridge in stainless steel AISI 304 with double o-ring sealing.
1 2 3 4
10
10
5 6 6 5 98
7
1 Cleaning and self-cleaning filters
12
Manual filters - residential
MiniBRAVOSelf-cleaning filter
Overview
MiniBRAVO is a small, compact self-cleaning filter characterized by an innovative and simple cleaning system, that makes it a vanguard product in the field of domestic filtration. Once the filter is installed, the bi-directional connection permits to regulate the water flow direction into the filter, according to the need.The cleaning system of MiniBRAVO includes the back-washing of the cartridge and the discharge of dirt. The cleaning operation is simple and swift: it is just required to move the knob (reversing the water flow) on the top, then open the discharge tap at the bottom. Close the tap and switch the knob to the original position to bring the filter in filtering position.The opening from the top is a simple but useful feature and it permits easier maintenance operations.
Key features Bi-directional connection Cartridge back-washing Compact dimension Opening from the top Calendar
Application Point of entry of main water into the buildings, hot water circuits, farming and gardening.Part of impurities commonly found in waters consist of sand, flakes of oxides and coarse material can cause serious troubles to equipments and plants, if not properly removed from the flow of water: installation of a protection filter is the most simple and effective way to avoid such problems. In case of drinkable water is treated, current national laws on drinkable water quality and on quality of materials in contact with food must be followed.
Stainless steel cartridge No need of cartridge replacing Entirely made with the best materials Completely Made In Italy
A E
B
D
C
13
Manual filters - residential
Text per offer Self cleaning filter MiniBRAVO – (specify the model) – is suitable for filtering water, eliminating suspended particles, such as: sand, silt, metal particles, etc. up to 89 microns rating. The filter is suitable to protect domestic supplies, hydro- thermo-sanitary plants and equipments in general. Once filter has been installed, bidirectional connection allow to set the entry direction of the water into the filter as necessary, turning of use of the knob. Suitable for drinkable water filtration (visit our web site for further information).
Referential EU norms and EN standards MiniBRAVO is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12, Standards UNI EN 13443:1 2007. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to domestic water, heating and cooling plants. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
MiniBRAVO - performances and technical data
QUOTES MiniBRAVO Filter
FT004, FT006
CODE FT004 FT006
CONNECTIONS inches ½”F ¾”F
MAX. FLOW RATE lt/h 1800 3200
ΔP (max. flow rate) bar 0,2
STANDARD FILTRATION RATING micr. 89
MIN. WORKING PRESSURE bar 1,5
MAX. WORKING PRESSURE bar 10
MIN./MAX WATER TEMP. °C 5/30
MIN./MAX EXTERNAL TEMP. °C 5/30
HEAD MATERIAL BRASS/POM
BOWL MATERIAL TROGAMID®
CARTRIDGE MATERIAL STAINLESS STEEL AISI304
Included: swab for cartridge clean.
CODE FT004 FT006
WIDTH (A) mm 90 90
CONNECTION HEIGHT (B) mm 185 185
TOTAL HEIGHT (C) mm 253 253
MINIMUM HEIGHT FROM GROUND (D) mm 300 300
DEPTH (E) mm 100 100
MiniBRAVO filters are equipped with a special swap for cartridge clean.
Cartridge in stainless steel AISI 304 with double o-ring sealing.
1 Cleaning and self-cleaning filters
1
1 2 3 4
2
12345678
10
16
20014
12
86
100
0
20
50
4
230
150
ACQUA BREVETTI
1 2 3 4 5 6 8 6 5 9
10
10
7
14
Manual filters - residentialCleaning or replacement of MiniBRAVO filter cartridge
BI-DIRECTIONAL FITTING
Installation scheme
Once installed, the water in-take to the filter can be set as needed using the knob indicating IN SX (inlet from left) - IN DX. (inlet from right)
IN SX (water comes from Left)
IN DX (water comes from Right)
Date disk: aftyer cleaning the filter cartridge, set the date as reminder.
Knob:the picture is indicating left-hand in-take..
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. MiniBRAVO Filter; 9. Treated water outlet; 10. Discharge.
1. Change the water in-take by switching the knob from IN DX to IN SX or vice-versa.
1. Shut off the water at the both sides of the filter
2. Turn the ring nut counter-clockwise until it is released.
3. Extract the flow diverter with the cartridge from the filter body.
4. Brush the cartridge under the water using the special swab provided: if necessary, put the cartridge into 100 °C water or replace it.
5. For re-assembling, insert the diverter+cartridge assembling, insert the ring nut and rotate it clockwise until it is tight.
6. Turn on the water at the both side of the filter.
2. Open the discharge tap for few seconds 3. Close the tap and switch the knob to the original position.
15
Manual filters - residential
BravoDUE Cleaning filter
Overview
Often in water are present impurities as sands, rust flakes, incrustation residues that could damage sanitary systems (pipes, valves, mixers etc.). The installation of a protecting filter is the easier and more effective solution to avoid such problems.BravoDUE is a cleaning protective filter with net cartridge of compact size that could be employed for the protection of cold water distributing nets, feeding of heating and cooling plants and process water networks. It is suitable for installation in drinkable water. BravoDUE allows flexible installations thanks to the 360° adjustable connecting brass plate (every 90°), it is highly resistant to mechanical shear stresses that usually leads to the breakage of plastic heads. The connection plate incorporates a non-return valve. Stainless steel cartridge with o-ring sealing, resistant to pressure shocks, avoiding crushing and straining. For activate the cleaning it is sufficient to open the drainage tap on the bottom of the bowl, which create a tangential high-velocity flow able to remove the dirt.
Key features Compact dimensions Flexible installation (360° adjustable connection plate) Non-Return valve Resistance to high pressures
Application Point of entry of main water into the buildings, hot water circuits, farming and gardening. Part of impurities commonly found in waters consist of sand, flakes of oxides and coarse material can cause serious troubles to equipments and plants, if not properly removed from the flow of water. Installation of a protection filter is the most simple and effective way to avoid such problems. In case of drinkable water is treated, current national laws on drinkable water quality and on quality of materials in contact with food must be followed.
Stainless steel cartridge No need of cartridge replacing Completely made in Italy
1 Cleaning and self-cleaning filters
D
E
B
A
C
16
Manual filters - residential
QUOTES
BravoDUE - performances and technical data
CODE FT320 FT322 FT324
CONNECTION inches ¾” F 1” F 1”¼ F
NOMINAL FLOW RATE (DP=0.2 BAR) lt/h 2500 3500 3800
PEAK FLOW RATE (DP=0.5 BAR) lt/h 4200 5800 6300
STANDARD FILTRATION RATING micr. 89
WORKING PRESSURE MIN/MAX bar 1.5 - 10
WATER TEMPERATURE MIN/MAX °C 5 - 30
EXTERNAL TEMPERATURE MIN./MAX. °C 5 - 30
CODE FT320 FT322 FT324
WIDTH (A) mm 177 179 190
CONNECTION HEIGHT (B) mm 206 206 206
TOTAL HEIGHT (C) mm 250 250 250
MINIMUM HEIGHT FROM GROUND (D) mm 300 300 300
DEPTH (E) mm 129 129 129
BravoDUE Filter
FT320, FT322, FT324
360° adjustable connection plate with non-return valve.
BravoDUE filters are equipped with a special swap for cartridge clean and a green key to open the filter, simply turning the vase.
Cartridge in stainless steel AISI 304 with double o-ring sealing.
17
Manual filters - residential
Referential EU norms and EN standardsBravoDUE is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12, Standards UNI EN 13443:1 2007. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to domestic water, heating and cooling plants. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
Text per offer Cleaning filter BravoDUE, (specify the model) of compact dimensions, suitable for water filtration, for elimination of suspended material, such as: sand, silt, metal particles, etc. up to 89 microns rating in domestic drinking water, cold water distributing nets, feeding of heating and cooling plants and process water networks. Equipped with 360° adjustable brass plate connection with non-return valve incorporated, and 89 microns stainless steel cartridge with o-ring sealing. All the material that compose the filter are highly resistant to typical plants strains. Cleaning of the cartridge is activated trough the opening of the discharge tap. Connection available: ¾ - 1 – 1 ¼. Equipped with opening plastic key.
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valves; 6. Sampling taps; 7. By-pass valve; 8. BravoDUE filter; 9. Treated water outlet; 10. Discharge.
Installation scheme
1 2 3 4
5 6 8 6 5 9
1010
7
1 Cleaning and self-cleaning filters
18
PuliFILCleaning filter
Overview
PuliFIL is an innovative filter with a patented system of cleaning composed by two different actions: brushing of the filtering cartridge and high speed discharge. This method allows an efficient and thorough cleaning both of the filtering cartridge and the filter bowl. Raw water entering PuliFIL flows from the outside toward the inside of the filtering cartridge. The cleaning is started by rotating clockwise the upper green knob: this movement activates, at each click, the brushing system and the opening of the discharge valve which creates an high speed tangential flow which removes impurities accumulated in the filter bowl.PuliFIL head’s is made in brass resistant to mechanical shear stresses due to installation which usually lead to breakage of plastic heads. The vessel, equipped with the discharge valve, is made in high-tenacity polyamide (maximum pressure 16 bar). The filtering surface is in stainless steel soldered on a stretched wire netting. The particular structure of the filtering cartridge makes it resistant to mechanical shocks and pressure gradients eliminating deformation and crushing of the filtering cartridge. PuliFIL’s cleaning brushes are equipped with silver inserts which contrast the bacterial proliferation in the filter. PuliFIL meets Italian requirements for drinking water treatment. The standard filtration rating of PuliFIL is 89 microns; other filtration ratings (30, 50, 150 microns) are available upon request. PuliFIL with 1”½ and 2” connections are equipped with two pressure gauges to monitor pressure drop through the filtering cartridge enabling one to easily determine the degree of clogging.
Key features Patented cleaning system brushing+drainage Connections from ¾” to 2” No need of cartridge replacing Resistance to high pressure and hot water
Stainless steel cartridge Silver wires inside the brushes Entirely made with the best materials Completely Made In Italy
Application Point of entry of main water into the buildings, hot water circuits, farming and gardening. Part of impurities commonly found in waters consist of sand, flakes of oxides and coarse material can cause serious troubles to equipments and plants, if not properly removed from the flow of water. Installation of a protection filter is the most simple and effective way to avoid such problems. In case of drinkable water is treated, current national laws on drinkable water quality and on quality of materials in contact with food must be followed.
Semi-automatic filters - residential
19
CODE FT010 FT012 FT014 FT016 FT018
CONNECTIONS inches ¾”F 1”F 1¼”F 1½”M 2”M
NOMINAL FLOW RATE lt/h 4800 6000 6500 12000 16000
ΔP (NOMINAL FLOW RATE) bar 0,2
STANDARD FILTRATION RATING* micr. 89
MIN. WORKING PRESSURE bar 1,5
MAX WORKING PRESSURE bar 16
MIN./MAX WATER TEMPERATURE °C 5/30
MIN./MAX EXTERNAL TEMPERATURE °C 5/30
WATER CONSUMPTION FOR CLEANING lt 6 (@3bar)
HEAD MATERIAL BRASS
BOWL MATERIAL TROGAMID®
CARTRIDGE MATERIAL STAINLESS STEEL AISI 304
BRUSHES MATERIAL NYLON-SILVER
* Other filtration ratings available on demand: 30, 50, 150 micron.
CODE FT010 FT012 FT014 FT016 FT018
WIDTH (A) mm 100 100 100 251 265
CONNECTION HEIGHT (B) mm 237 237 242 292 292
TOTAL HEIGHT (C) mm 312 312 313 364 364
MINIMUM HEIGHT FROM GROUND (D) mm 400 400 400 600 600
DEPTH (E) mm 90 90 90 120 120
EA
CB D
C
A
B
D
E
PuliFIL - performances and technical data
PuliFIL Filter
FT010, FT012, FT014 FT016, FT018
QUOTES
Semi-automatic filters - residential
1 Cleaning and self-cleaning filters
12345678
150
230
4
50
02
0
100
68
12
14200
16
10
ACQUA BREVETTI
1 2 3 4 5 6 8 6 5 9
10
10
7
Min 400
20
Filtering cartridge in stainless steel AISI 304, with double o-ring sealing.
Referential EU norms and EN standards PuliFIL is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12, Standards UNI EN 13443:1 2007. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to domestic water, heating and cooling plants. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
Cleaning System
Each turn brushing and discharge
The cleaning is activated by a clockwise rotation (manually operated) of the green knob. Each turn of the knob carries out the complete polishing of cartridge surface and, at the same time, the drainage of dirt, through the bottom valve opening.
Brushes are formed by nylon bristles with a silver wire ensuring bacteriostatic conditions inside bowl.
It is available as accessory a green key to open and disassemble the filter.
Text per offer Cleaning filter PuliFil – (specify the model) – is suitable for filtering water, eliminating suspended particles, such as: sand, silt, metal particles, etc. up to 89 microns rating. The filter is suitable to protect domestic supplies, hydro- thermo-sanitary plants and equipments in general. Thanks to its patented cleaning system brushing + discharge, PuliFIL guarantees an effectiveness well cleaning of filtering cartridge, as well as the discharge of impurities suspended in water. The presence of silver threads within the system cleaning ensures the maintenance of conditions that impede bacterial and algal proliferation inside the vase. Suitable for drinkable water filtration.
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valves; 6. Sampling taps; 7. By-pass valve; 8. PuliFIL filter; 9. Treated water outlet; 10. Discharge.
Installation scheme
Semi-automatic filters - residential
21
Automatic filter - residential
PuliMATIC Automatic cleaning filter
Key features Patented cleaning system brushing+drainage Connections from ¾” to 2” No need of cartridge replacing Resistance to high pressure and hot water Timed cleaning
Application PuliMATIC has been specifically designed for the filtration of cold drinking water predominantly in civil applications but it may also be used for the protection of water distribution lines in technological applications (heating and cooling systems, industrial installations, etc.).
Stainless steel cartridge Silver wires inside the brushes Entirely made with the best materials Completely Made In Italy
Overview
Raw water entering PuliMATIC flows from the outside toward the inside of the filtering cartridge. PuliMATIC is an automatic cleaning filter with an electronic control board which starts the filter cleaning in an operator-independent way. The innovative filter cleaning cycle is composed by two different actions: brushing of the filtering cartridge and opening of the discharge valve which creates an high speed tangential flow which removes impurities accumulated in the filter bowl. This method allows an efficient and thorough cleaning both of the filtering cartridge and the filter bowl. The filter cleaning cycle is started automatically by the electronic control board when a pre-set time interval has elapsed.
PuliMATIC head’s is made in brass resistant to mechanical shear stresses due to installation which usually lead to breakage of plastic heads. The vessel, equipped with the discharge valve, is made in high-tenacity polyamide (maximum pressure 16 bar). The filtering surface is in stainless steel soldered on a stretched wire netting. The particular structure of the filtering cartridge makes it resistant to mechanical shocks and pressure gradients eliminating deformation and crushing of the filtering cartridge. PuliMATIC’s cleaning brushes are equipped with silver inserts which contrast the bacterial proliferation in the filter. PuliMATIC meets Italian requirements for drinking water treatment. The standard filtration rating of PuliMATIC is 89 microns; other filtration ratings (30, 50, 150 microns) are available upon request. PuliMATIC is available in two versions:•PuliMATIC – short cleaning cycle
(adjustable cleaning interval: each 2 – 4 – 6 – 8 hours);•PuliMATIC – long cleaning cycle
(adjustable cleaning interval: each 12 – 24 – 36 – 48 hours).PuliMATIC with 1”½ and 2” connections are equipped with two pressure gauges to monitor pressure drop through the filtering cartridge enabling one to easily determine the degree of clogging. Furthermore PuliMATIC is equipped with a black button allowing to start manually, at any time, a washing cycle. Further, PuliMATIC is endowed with an output signal (voltage free contact) which can be used to control, through an electrical auxiliary board, pumps, solenoid valves, alarms, etc.
1 Cleaning and self-cleaning filters
22
SHORT CLEANING CYCLE CODE FT370 FT372 FT374 FT376 FT378
LONG CLEANING CYCLE CODE FT360 FT362 FT364 FT366 FT368
CONNECTION inches ¾”F 1”F 1”¼F 1”½M 2”M
NOMINAL FLOW RATE (DP=0.2 BAR) lt/h 4800 6000 6500 12000 16000
STANDARD FILTRATION RATING* micr. 89
WORKING PRESSURE MIN/MAX bar 1.5 - 16
CLEANING INTERVAL hours short cycle (2 - 4 - 6 - 8) ÷ long cycle (12 - 24 - 36 - 48)
CLEANING DURATION - WATER CONSUMPTION sec - lt 19 - 6
WATER TEMPERATURE MIN/MAX °C 5 – 30
EXTERNAL TEMPERATURE MIN./MAX. °C 5 - 30
TRANSFORMER** V 230/18
Automatic filter - residentialPuliMATIC - performances and technical data
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. PuliMATIC Filter; 9. Treated water outlet; 10. Discharge.
Installation scheme
10
16
20014
12
86
100
0
20
50
4
230
150
12345678
1 2 3 4
79
8
11
5 6 6 51
1212
ACQUA BREVETTI
123456ALIMENTAZIONE
CONTROLAVAGGIOATTESA
DIFFERENZIALE
ATTESA DUPLEX
MOTORE BLOCCO
220 V
220 V
* Other filtration ratings available on demand: 30, 50, 150 micron.** Available on request 110/18 V transformer.
Filtering cartridge in stainless steel AISI 304, with double o-ring sealing.
Brushes are formed by nylon bristles with a silver wire ensuring bacteriostatic conditions inside bowl.
23
Automatic filter - residentialQUOTES
PuliMATIC Filter
FT370, FT372, FT374, FT360, FT362, FT364 FT376, FT378, FT366, FT368
CODE FT360 FT370 FT362 FT372 FT364 FT374 FT366 FT376 FT368 FT378
WIDTH (A) mm 100 100 100 251 265
CONNECTION HEIGHT (B) mm 237 237 242 292 292
TOTAL HEIGHT (C) mm 408 408 408 459 459
MINIMUM HEIGHT FROM GROUND (D) mm 400 400 400 600 600
DEPTH (E) mm 90 90 90 120 120
EA
CB D
E
D
CB
A
1 Cleaning and self-cleaning filters
24
Semi-automatic filters - residential
Overview
Raw water entering BravoFIL flows from the outside toward the inside of the filtering cartridge. BravoFIL is a self-cleaning filter with an innovative system of cleaning composed by two different actions: brushing and high speed back-wash with filtered water of the filtering cartridge. This method allows an efficient and thorough cleaning both of the filtering cartridge and the filter bowl. The cleaning is started by rotating clockwise the upper green knob: this movement activates, at each click, the brushing and the opening of the discharge valve which creates an tangential flow which removes impurities accumulated in the filter bowl. During the filter cleaning the water entering BravoMATIC is diverted and, after having passed through an auxiliary back-wash filter, it is forced by the turbo-jet against the cartridge ensuring the effective removal of impurities retained by the filter cartridge. The automatic opening of the discharge valve (located at the bottom of the bowl) creates a tangential high-speed flow which removes impurities accumulated in the bowl during working.BravoFIL is equipped with a 360° adjustable connection plate (4 90° steps) of brass resistant to mechanical shear stresses due to installation which usually lead to breakage of plastic heads. The adjustable connection plates offers the maximum installation flexibility. Further, in the connection plate it is housed a non-return valve which allows the filter back-washing without the risk of pressure surge in the main water line. BravoFIL is equipped with an auxiliary cartridge for the filtration of water during back-wash. This precaution allows to perform the filter cleaning always with clean water obtaining the best results. The head of the filter is made in acetal resin and the vessel, equipped with the discharge valve, is made in high-tenacity polyamide (maximum pressure 10 bar). The filtering surface is in stainless steel soldered on a stretched wire netting. The particular structure of the filtering cartridge makes it resistant to mechanical shocks and pressure gradients eliminating deformation and crushing of the filtering cartridge. BravoFIL’s cleaning brushes are equipped with silver inserts which contrast the bacterial proliferation in the filter. BravoFIL meets Italian requirements for drinking water treatment. The standard filtration rating of BravoFIL is 89 microns; other filtration ratings (30, 50, 150 microns) are available upon request.
Key features Patented two-steps cleaning system Back-wash with filtered water Brass connection plate 360° adjustable Resistance to high pressure and hot water No need of cartridge replacing
Application Point of entry of main water into the buildings, hot water circuits, farming and gardening.Part of impurities commonly found in waters consist of sand, flakes of oxides and coarse material can cause serious troubles to equipments and plants, if not properly removed from the flow of water: installation of a protection filter is the most simple and effective way to avoid such problems.In case of drinkable water is treated, current national laws on drinkable water quality and on quality of materials in contact with food must be followed.
Stainless steel cartridge Silver wires inside the brushes Entirely made with the best materials Completely Made In Italy
BravoFILSelf-cleaning filter
25
Semi-automatic filters - residential
Text per offer Self cleaning filter BravoFIL (specify the model) is suitable for filtering drinkable water, eliminating suspended particles, such as: sand, silt, metal particles, etc. up to 89 microns rating. The filter is suitable to protect household appliance, hydro- thermo-sanitary plants and equipments in general. BravoFIL is equipped of double action cleaning system: through of use of a simple manoeuvre user activates a high speed turbo-spray making a back wash with filtered water and, simultaneously, brushing of the entire cartridge surface, performing a real and complete cleaning.The silver wires within the brushes ensures the maintenance of conditions that impedes bacterial and algal proliferation inside the vase (visit our web site for further information).
Referential EU norms and EN standards BravoFIL is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12, Standards UNI EN 13443:1 2007. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to do-mestic water, heating and cooling plants. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
Brushes are formed by nylon bristles with a silver wire ensuring bacteriostatic conditions inside bowl.
filtering net for back-washing (1)
Patented self-cleaning system
cleaning brush (2)
operating filtering cartridge (3)turbo-spray (4)
discharge valve (5)
Water enters the filter and flows down through the filtering cartridge (3) from the exterior to the interior and comes out clean. By turning the knob clock-wise the filtering cartridge turns 90° and it is automatically cleaned by brushes located in the bowl (2). At the same time the incoming water is diverted, runs through the counter-wash filter (1), enters inside the cartridge and activates the turbo-jet plate (4), which sprays clean water at high speed uniformly over the filtering cartridge from internal side to external (in back-washing). Dirt comes out from the discharge valve (5) together with water. The two-step cleaning procedure is accomplished by two knob notches.
1° STEP – BACKWASHTurn the knob clockwise till the click. Hold it in cleaning phase (discharge valve opened) for few seconds until have obtained the complete removal of dirty accumulated into the bowl.
2° STEP – FILTRATIONTurn again the knob clockwise till the click. Filters returns in working phase (filtration).
This operation can be repeated several times in case of excessive deposits of dirt.
The connection plate can be turned of 360°, every 90°, to be suitable to any installing conditions. It is only required to follow the water flow direction indicated by the arrow placed on the plate.
Cleaning manoeuvre Installation
3. 4.1. 2.
360° ADjUSTABLE CONNECTION PLATE WITH NON-RETURN VALVE
1 Cleaning and self-cleaning filters
ACQUA BREVETTI
12345678
150
230
4
50
02
0
100
68
12
14200
16
10
1 2 3 4 5 6 8 6 5 9
1010
Min. 400
7
26
Semi-automatic filters - residential
BravoFIL Filter
FT020, FT022, FT024 FT026
QUOTES
BravoFIL - performances and technical data
* Other filtration ratings available on demand: 30, 50, 150 micron.Included: nuts and tails for connection.
CODE FT020 FT022 FT024 FT026
CONNECTIONS inches ¾”M 1”M 1¼”M 1½”M
MAX. FLOW RATE lt/h 3200 4500 5000 6000
ΔP (MAX. FLOW RATE) bar 0,2
STANDARD FILTRATION RATING* micr. 89
MIN. WORKING PRESSURE bar 1,5
MAX WORKING PRESSURE bar 10
MIN./MAX WATER TEMPERATURE °C 5/30
MIN./MAX EXTERNAL TEMPERATURE °C 5/30
WATER CONSUMPTION FOR BACKWASH lt 6 (@3bar)
HEAD MATERIAL BRASS/POM
BOWL MATERIAL TROGAMID®
CARTRIDGE MATERIAL
BRUSHES MATERIAL
CODE FT020 FT022 FT024 FT026
WIDTH (A) mm 177 179 190 198
CONNECTION HEIGHT (B) mm 264 264 267 331
TOTAL HEIGHT (C) mm 350 350 353 416
MINIMUM HEIGHT FROM GROUND (D) mm 400 400 400 500
DEPTH (E) mm 136 136 136 136
ACQUA BREVETTI
CA E
B
D
ACQUA BREVETTI
CB
A F
D
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. BravoFIL Filter; 9. Treated water outlet; 10. Discharge.
Installation scheme
27
Semi-automatic filters- residential
BravoFIL PLUS Self - cleaning filter with pressure reducer incorporated.
Overview
BravoFIL PLUS is the new filter that offers complete protection to civil water distribution systems: a single device that combines the effectiveness of a self-cleaning filter and the protection of a pressure reducer. BravoFIL PLUS is equipped with a 360° adjustable connection plate (4 90° steps) of brass resistant to mechanical shear stresses due to installation which usually lead to breakage of plastic heads. The adjustable connection plates offers the maximum installation flexibility. Further, in the connection plate it is housed a non-return valve which allows the filter back-washing without the risk of pressure surge in the main water line. BravoFIL PLUS is equipped with an auxiliary cartridge for the filtration of water during back-wash. This precaution allows to perform the filter cleaning always with clean water obtaining the best results. The head of the filter is made in acetal resin and the vessel, equipped with the discharge valve, is made in high-tenacity polyamide (maximum pressure 10 bar). The filtering surface is in stainless steel soldered on a stretched wire netting. The particular structure of the filtering cartridge makes it resistant to mechanical shocks and pressure gradients eliminating deformation and crushing of the filtering cartridge. BravoFIL PLUS’s cleaning brushes are equipped with silver inserts which contrast the bacterial proliferation in the filter. BravoFIL PLUS meets Italian requirements for drinking water treatment. The standard filtration rating of BravoFIL PLUS is 89 microns; other filtration ratings (30, 50, 150 microns) are available upon request.
Operation
Raw water entering BravoFIL PLUS flows from the outside toward the inside of the filtering cartridge. BravoFIL PLUS is a self-cleaning filter with an innovative system of cleaning composed by two different actions: brushing and high speed back-wash with filtered water of the filtering cartridge. This method allows an efficient and thorough cleaning both of the filtering cartridge and the filter bowl. The cleaning is started by rotating clockwise the upper green knob: this movement activates, at each click, the brushing and the opening of the discharge valve which creates an tangential flow which removes impurities accumulated in the filter bowl. During the filter cleaning the water entering BravoFIL PLUS is diverted and, after having passed through an auxiliary back-wash filter, it is forced by the turbo-jet against the cartridge ensuring the effective removal of impurities retained by the filter cartridge. The automatic opening of the discharge valve (located at the bottom of the bowl) creates a tangential high-speed flow which removes impurities accumulated in the bowl during working. BravoFIL PLUS is equipped with a built-in pressure reducer which allows the regulation of pressure to values between 1.5 bar and 6 bar protecting the equipment and the distribution line downstream. The reducer is preset at 3 bar but it can be adjusted simply by turning the adjustment screw.
1 Cleaning and self-cleaning filters
28
Semi-automatic filters - residential
CODE FT120 FT122 FT124
CONNECTION inches ¾”M 1”M 1”¼M
NOMINAL FLOW RATE (DP=0.2 BAR) lt/h 3200 4500 5000
STANDARD FILTRATION RATING micron 89
DOWNSTREAM ADjUSTABLE PRESSURE bar 1.5 - 6
WORKING PRESSURE MIN/MAX bar 1.5 - 10
WATER TEMPERATURE MIN/MAX °C 5 – 30
EXTERNAL TEMPERATURE MIN./MAX. °C 5 - 30
BravoFIL PLUS - performances and technical data sheet
BravoFIL PLUS Filter
ACQUA BREVETTI
A E
BC
D
BravoFIL Plus is equipped with pressure reducer which allows to stabilize pressure between values from 1.5 and 6 bars, protecting appliances and water plant downstream. The pressure reducer is pre-calibrated at 3 bars, but it is possible to adjust it acting on the regulating screw.
Key features Pressure Reducer Incorporated in the connection plate Patented two-steps cleaning system Back-wash with filtered water Brass connection plate 360° adjustable Resistance to high pressure and hot water
Application BravoFIL Plus has been specifically designed for the filtration of cold drinking water predominantly in civil applications but it may also be used for the protection of water distribution lines in technological applications (heating and cooling systems, industrial installations, etc.).
No need of cartridge replacing Stainless steel cartridge Silver wires inside the brushes Entirely made with the best materials Completely Made In Italy
* Other filtration rating available on demand: 30, 50, 150 micron.
FT120, FT122, FT124
29
Text per offer Semi-automatic protection self-cleaning filter with a built-in pressure reducer with a standard filtration rating of 89 micron which retains coarse impurities from water preventing them from damaging the system. The cleaning is started by rotating clockwise the upper green knob which activates per each click the cartridge cleaning and discharge of dirt. During the filter cleaning the water entering BravoFIL PLUS is diverted and, after having passed through an auxiliary back-wash filter, it is forced by the turbo-jet against the cartridge ensuring the effective removal of impurities retained by the filter cartridge, and contemporaneously is performed the external cartridge cleaning with brushes. The automatic opening of the discharge valve (located at the bottom of the bowl) creates a tangential high-speed flow which removes impurities accumulated in the bowl during working.
Semi-automatic filters - residential
Referential EU norms and EN standards BravoFIL PLUS is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12, Standards UNI EN 13443:1 2007. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to domestic water, heating and cooling plants. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
QUOTES
Legenda1. Water inlet 2. Main flow meter; 3. Non return valve; 4. Valve; 5. Sampling taps; 6. By-pass valve; 7. Filter BravoFIL Plus with pressure reducer; 8. Filtered water outlet; 9. Drain.
Installation scheme
ACQUA BREVETTI
12345678
2
354
7
99
6
45 81
CODE FT120 FT122 FT124
WIDTH (A) mm 177 179 190
CONNECTION HEIGHT (B) mm 264 264 267
TOTAL HEIGHT (C) mm 370 370 373
MINIMUM HEIGHT FROM GROUND (D) mm 400 400 400
DEPTH (E) mm 180 180 180
1 Cleaning and self-cleaning filters
30
BravoMATIC Self-cleaning filter
Overview
BravoMATIC is a completely automatic self-cleaning filter which is able to supply filtered water constantly for a considerable period of time without requiring any maintenance. BravoMATIC is robust and compact, and suitable for uses both domestic and industrial. BravoMATIC is equipped with an electronically controlled programmable timing system that activates back-wash cycle (patented system). BravoMATIC is equipped also with a built-in hydraulic differential pressure switch that constantly tracks head losses and activates the back-wash when a differential pressure of 0.5 bar is detected, regardless of timer. This system guarantees an adeguate cleaning and avoid any possible clogging. BravoMATIC has a patented washing cycle involving dirt drainage + cartridges brushing + high-speed spray: when differential pressure is higher than 0.5 bar or the preset time is elapsed, motor runs 90° clockwise the filtering cartridge that is automatically cleaned by brushes located in the bowl; at the same time the incoming water is diverted by the rotation and runs through the back-wash filter; it goes into turbo-jet channel, which sprays clean water at high speed on the entire cartridge, from internal to external side. Furthermore BravoMATIC is equipped with a black button allowing to start manually, at any time, a washing cycle. Further, BravoMATIC is endowed with an output signal (voltage free contact) which can be used to control, through an electrical auxiliary board, pumps, solenoid valves, alarms, etc.
Automatic filters - residential
Key features Automatic cleaning Patented two-steps cleaning system Automatic cleaning activated by timing and differential pressure switch Brass connection plate adjustable 360°
No need of cartridge replacing Stainless steel cartridge Silver wires inside brushes Entirely made with the best materials Completely Made In Italy
ApplicationsBravoMATIC is suitable both for domestic and industrial uses. It protects hydraulic systems and pipes from damages caused by reduced quantities of foreign bodies such as sand, silt, rust, metal oxides, etc. which can cause erosion-corrosion as a result of contact with pipes. BravoMATIC is available in a range of connection dimensions ranging from ¾” to 1”½ M inches. Maximum flow rates range from 3.2 mc/h to 6 mc/h with limited head losses (0.2 bar at maximum flow rate). A solenoid valve should be installed downstream to interrupt water flow when the back washing cycle is active.
Text for offerAutomatic self cleaning filter BravoMATIC - (specify the model) - is suitable for filtering water, eliminating suspended particles, such as: sand, silt, metal particles, etc. up to 89 microns rating. The filter protects household appliance, hydro-thermo-sanitary plants and equipments in general. BravoMATIC system is equipped of electronic automatic system with a presetting timer to make washing cycle every 2-4-6-8 hours or every 12-24-36-48 hours. BravoMATIC is also furnished with electro-hydraulic differential that monitors continuously the cartridge clogging and can activate backwash, out of the time set, in case of DP=0.5 bar. BravoMATIC has a self cleaning system working by double cleaning action: backwash (with high speed spray of filtered water) and, simultaneously, brushing of surface entire cartridge. The silver wires within the brushes ensures the maintenance of conditions that impedes bacterial and algal proliferation inside the vase (visit our web site for further information). Depending on applications, upstream of the filter it is advisable to install an solenoid valve (manageable by electrical contact available on the filter) that break the use of water during backwash operations. Suitable for drinkable water filtration.
31
Automatic filters - residentialBravoMATIC - performances and technical data
QUOTES
Referential EU norms and EN standards BravoMATIC is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12, Standards UNI EN 13443:1 2007. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to do-mestic water, heating and cooling plants. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
CODE FT030 FT032 FT034 FT036 FT130 FT132 FT134 FT136
CONNECTIONS inches ¾”M 1”M 1¼”M 1½”M ¾”M 1”M 1¼”M 1½”M
MAX. FLOW RATE lt/h 3200 4500 5000 6000 3200 4500 5000 6000
ΔP (MAX. FLOW RATE) bar 0,2
STANDARD FILTRATION RATING* micr. 89
MIN. WORKING PRESSURE bar 1,5
MAX WORKING PRESSURE bar 10
MIN./MAX WATER TEMPERATURE °C 5/30
MIN./MAX EXTERNAL TEMPERATURE °C 5/30
WATER CONSUMPTION FOR BACKWASH lt 6 (@3bar)
PRESET TIMINGS FOR BACKWASHING hours 2-4-6-8 12-24-36-48
ΔP FOR AUTOMATIC CLEANING bar 0,5
HEAD MATERIAL DELRIN
BOWL MATERIAL TROGAMID®
CARTRIDGE MATERIAL STAINLESS STEEL AISI 304
BRUSHES NYLON-SILVER
TRANSFORMER** V 230/18
* Other filtration ratings available on demand: 30, 50, 150 micron. Included: nuts and tails for connections.** Available on request 110/18 V transformer
CODE FT030 FT130 FT032 FT132 FT034 FT134 FT036 FT136
WIDTH (A) mm 177 179 190 198
CONNECTION HEIGHT (B) mm 264 264 267 331
TOTAL HEIGHT (C) mm 452 452 453 516
MINIMUM HEIGHT FROM GROUND (D) mm 400 400 400 500
DEPTH (E) mm 140 140 140 140
ACQUA BREVETTI
EA
CB
D
MOTORE BLOCCO
ATTESA DUPLEX
ATTESA DIFFERENZIALE
CONTROLAVAGGIO
ALIMENTAZIONE 123456
140
215
235
ACQUA BREVETTI
CB
A
D
E
BravoMATIC Filter
Control panel (cod.23022030)
FT030, 032, 034FT130, 132, 134
FT036FT136
1 Cleaning and self-cleaning filters
220 V
12345678
150
230
4
50
02
0
100
68
12
14200
16
10
ACQUA BREVETTI
220 V123456ALIMENTAZIONE
CONTROLAVAGGIOATTESA
DIFFERENZIALE
ATTESA DUPLEX
MOTORE BLOCCO
220 V
12345678
150
230
4
50
02
0
100
68
12
14200
16
10
ACQUA BREVETTI
1 2 3 4
7
13
5 6 6
10
10
8 5
9
Min. 400
10
10
1 2 3 4
12 7 11
13 9
5 6 8 6 5
Min. 400
32
Automatic filters - residentialOptionals In order to get the most effective washing during the BravoMATIC cleaning phase it is necessary a 2 bars pressure on-line downstream the filter. In case of this condition is not present, we advice to apply BravoMATIC filter with closing solenoid valve for the backwash. For purchasing please order the code correspondent to the BravoMAX filter followed by “/EV”. F.e. for a BravoMAX 2” threaded connection with solenoid valve, use: “FT052/EV”.
Control panelIt is available a control panel (optional) which is able to manage simply BravoMATIC (and BravoMAX)filters. The control panel is powered by a transformer 12/24 Vac and manage directly a filter and up to nr.2 solenoid valves 24 Vac. For BravoMATIC filters is generally sufficient to install a closing solenoid valve (for the backwash) placed at the filtered water outlet thus to create ideal pressure for the backwash of filter. Other contacts can be used to open by-pass valves or to manage the backwash pumps. In BravoMAX filters may be necessary to control two solenoid valve: one for closing (as suggested for BravoMATIC) and another for managing discharge and facilitating the removal of dirt, suitable for particularly dirty water. Closing solenoid valve for backwashThe solenoid valve for the backwash is useful to be installed downstream to the filter, managed by a control panel, which close it to create an high pressure on-line to get a better backwash of filter. The solenoid valves are available in following versions:Connection ¾” code EVC001 Conn. 2” cod. EVC005 Conn. 1” cod. EVC002 Conn. 1”¼ cod. EVC003 Conn. 1”½ cod. EVC004
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. BravoMATIC Filter; 9. Treated water outlet; 10. Discharge; 11. Solenoid valve for back wash; 12. Control panel; 13. Filter power feeder.
Installation scheme with control panel
Installation scheme without control panel
33
Semi-automatic filters - industrial
BravoMAX MCleaning filter
Overview
BravoMAX M is a semi-automatic cleaning filter made in stainless steel AISI 304 suitable for several type of industrial and civil applications where high flow rates are required.Raw water entering BravoMAX M flows from the outside toward the inside of the filtering cartridge. BravoMAX M is an innovative filter with a patented system of cleaning composed by two different actions: brushing of the filtering cartridge and high speed discharge. This method allows an efficient and thorough cleaning both of the filtering cartridge and the filter bowl. The cleaning is started by rotating clockwise the upper green knob: this movement activates, at each click, the brushing system and the opening of the discharge valve which creates an high speed tangential flow which removes impurities accumulated in the filter bowl.BravoMAX M is completely made in The filtering surface is in stainless steel soldered on a stretched wire netting. The particular structure of the filtering cartridge makes it resistant to mechanical shocks and pressure gradients eliminating deformation and crushing of the filtering cartridge. BravoMAX M is the ideal solution for the filtration of high water flow rates. BravoMAX M meets Italian requirements for drinking water treatment. The standard filtration rating of BravoMAX M is 150 microns; other filtration ratings are available upon request. BravoMAX M is available with both threaded and flanged connections. BravoMAX M is equipped with two pressure gauges to monitor pressure drop across the filtering cartridge enabling one to easily determine the degree of clogging.
Key features Patented cleaning system brushes+drainage Available with both threaded and flanged fittings (1 ½” to 3” and DN40 to DN80) Equipped with two pressure gauges
Stainless steel cartridge Silver wire inside the brushes. Made with highest quality materials. Completely Made In Italy
Applications BravoMAX M is the ideal solution for industrial applications such as: filtration of primary water, cooling waters, water for pumping stations, process water. BravoMAX is the best solution in civil works such as: apartment buildings, hotels, restaurants, campings, rest houses. Maximum flow rates range from 14 m3/h to 35 m3/h with limited head losses (0.2 bar at maximum flow rate). BravoMAX M is available in a range of filtration ratings: 89, 150 (standard) and 200 microns.
1 Cleaning and self-cleaning filters
34
Semi-automatic filters - industrialBravoMAX M - performances and technical data
CODE FT040/140 FT042/142 FT044/144 FT046/146
CONNECTIONS inches/DN 1½”M/DN40 2”M/ DN50 2½”M/ DN65 3”M/DN80
MAX. FLOW RATE m3/h 14 20 25 35
ΔP (MAX. FLOW RATE) bar 0,2
STANDARD FILTRATION RATING* micr. 150
MIN./MAX WORKING PRESSURE bar 1,5/10
MIN./MAX WATER TEMPERATURE °C 5/30
MIN./MAX EXTERNAL TEMPERATURE °C 5/30
WATER CONSUMPTION FOR CLEANING lt 8-10 (@3bar)
HOUSING MATERIAL INOX304 STAINLESS STEEL
CARTRIDGE MATERIAL INOX304 STAINLESS STEEL
BRUSHES MATERIAL NYLON-SILVER
WEIGHT kg 7,2 / 7,7 7,5 / 8,0 10 / 10,5 13 /13,5
* Available on demand other filtration degrees: 89 and 200 micron.
CODE FT040 FT042 FT044 FT046
WIDTH (A) mm 310 310 310 310
CONNECTION HEIGHT (B) mm 365 365 438 438
TOTAL HEIGHT (C) mm 510 510 578 578
MINIMUM HEIGHT FROM GROUND (D) mm 500 500 700 700
DEPTH (E) mm 190 190 190 190
CODE FT140 FT142 FT144 FT146
WIDTH (A) mm 310 310 310 310
CONNECTION HEIGHT (B) mm 365 365 438 438
TOTAL HEIGHT (C) mm 510 510 578 578
MINIMUM HEIGHT FROM GROUND (D) mm 500 500 700 700
DEPTH (E) mm 190 190 190 200
ACQUA BREVETTI
BC
EA
D
ACQUA BREVETTI
DC
EA
D
BravoMAX filter - threaded fittings
FT040, FT042, FT044, FT046
BravoMAX filter - flanged fittings
FT140, FT142, FT144, FT146
QUOTES
14
12
0
86
4
20
50
100150
230
16
10
200
230
200
150100
50
02
4
68
10
12
14
160
ACQUA BREVETTI
12345678
10
16
20014
12
86
100
0
20
50
4
230
150
1 2 3 4 5 6
8
6 5 9
1010 Min. 400
7
35
Semi-automatic filters - industrialText for offerSemi automatic cleaning filter BravoMAX model - (specify the model) - is suitable for filtering water, eliminating suspended particles, such as: sand, silt, metal particles, etc. up to 150 microns rating. The filter is suitable to protect household appliance, hydro-thermo-sanitary plants and equipments in general. BravoMAX M is made completely in stainless steel AISI304, includ-ing filtering cartridge. BravoMAX M uses a two-step cleaning system, involving filtering cartridge brushing and opening of the discharge valve to drain the dirt. Brushes are formed by nylon bristles with a silver wire ensuring bacteriostatic conditions in filter bowl. BravoMAX M is equipped with two gauges that allow you to monitor the differential pressure of filtering cartridge, and so to the clogging degree of the filter. Suitable for drinkable water filtration.
Referential EU norms and EN standards BravoMAX M is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12, Standards UNI EN 13443:1 2007. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to domestic water, heating and cooling plants. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
Installation scheme
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. BravoMAX M Filter; 9. Treated water outlet; 10. Discharge.
AISI 304 stainless steel filtering cartridge.
Turn the knob clockwise till the click to activate the cleaning.
Every click brush and discharge
1 Cleaning and self-cleaning filters
36
Automatic filters - industrial
BravoMAX ACleaning filter
Overview
BravoMAX A is a completely automatic cleaning filter made in stainless steel AISI 304, indicated for several types of civil and industrial applications where high flow rates filtration are requested. Raw water entering BravoMAX A flows from the outside toward the inside of the filtering cartridge. BravoMAX A is an automatic cleaning filter with an electronic control board which starts the filter cleaning in an operator-independent way. The innovative filter cleaning cycle is composed by two different actions: brushing of the filtering cartridge and opening of the discharge valve which creates an high speed tangential flow which removes impurities accumulated in the filter bowl. This method allows an efficient and thorough cleaning both of the filtering cartridge and the filter bowl. The filter cleaning cycle is started automatically by the electronic control board when the pressure drop across the filter cartridge reaches a pre-set value or a pre-set time interval has elapsed.BravoMAX A is completely made in The filtering surface is in stainless steel soldered on a stretched wire netting. The particular structure of the filtering cartridge makes it resistant to mechanical shocks and pressure gradients eliminating deformation and crushing of the filtering cartridge. BravoMAX A is the ideal solution for the filtration of high water flow rates. BravoMAX A’s cleaning brushes are equipped with silver inserts which contrast the bacterial proliferation in the filter. BravoMAX A meets Italian requirements for drinking water treatment. The standard filtration rating of BravoMAX A is 150 microns; other filtration ratings are available upon request. BravoMAX A is available with both threaded and flanged connections. BravoMAX A is equipped with two pressure gauges to monitor pressure drop across the filtering cartridge enabling one to easily determine the degree of clogging. BravoMAX A is available in two versions:•BravoMAX A – short cleaning cycle
(adjustable cleaning interval: each 2 – 4 – 6 – 8 hours);•BravoMAX A – long cleaning cycle
(adjustable cleaning interval: each 12 – 24 – 36 – 48 hours).Furthermore BravoMAX A is equipped with a black button allowing to start manually, at any time, a washing cycle. Further, BravoMAX A is endowed with an output signal (voltage free contact) which can be used to control, through an electrical auxiliary board, pumps, solenoid valves, alarms, etc.
Applications BravoMAX A is the ideal solution for industrial applications such as: filtration of primary water, cooling waters, water for pumping stations, process water. BravoMAX is the best solution in civil works such as: apartment buildings, hotels, restaurants, campings, rest houses. Maximum flow rates range from 14 m3/h to 35 m3/h with limited head losses (0.2 bar at maximum flow rate). BravoMAX A is available in a range of filtration ratings: 89, 150 (standard) and 200 microns.
Text for offerAutomatic cleaning filter BravoMAX A model - (specify the model) - is suitable for filtering water, eliminating suspended particles, such as: sand, silt, metal particles, etc. up to 89 microns rating. The filter is suitable to protect household appliance, hydro-thermo-sanitary plants and equipments in general. BravoMAX A is made completly in stainless steel AISI304, including filtering cartridge. BravoMAX A is equipped of electronic automatic system with a presetting timer (2/4/6/8 or 12/24/36/48 hours). BravoMAX A is also furnished with electro-hydraulic differential that continuously monitors the cartridge clogging and activating backwash, out of the time set, in case of there is a DP = 0.5 bar.The cleaning system involves the brushing complete filtration surface and, simultaneously, the discharge of dirt accumulated in vase throughout valve discharge. BravoMAX A is equipped with two gauges that allow the user to monitor the differential pressure of filtering cartridge, and so to the clogging degree of the filter. Suitable for drinkable water filtration.
Key featuresAutomatic cleaning Patented cleaning system brushing+drainage Connections from 1”½ to 3” Cleaning automatically activated by set timing or differential pressure switch
Stainless steel cartridge Silver wires inside the brushes. Made with highest quality materials Completely Made In Italy
ACQUA BREVETTI
F
DC
A
D
ACQUA BREVETTI
F
D
A
C D
MOTORE BLOCCO
ATTESA DUPLEX
ATTESA DIFFERENZIALE
CONTROLAVAGGIO
ALIMENTAZIONE 123456
140
215
235
37
Automatic filters - industrial
SHORT CYCLE CLEANING CODE inches/DN FT050 FT052 FT054 FT056 FT150 FT152 FT154 FT156
LONG CYCLE CLEANING CODE inches/DN FT060 FT062 FT064 FT066 FT160 FT162 FT164 FT166
CONNECTIONS inches/DN 1½”M 2”M 2½”M 3”M DN40 DN50 DN65 DN80
MAX. FLOW RATE m3/h 14 20 25 35 14 20 25 35
ΔP (MAX. FLOW RATE) bar 0,2
STANDARD FILTRATION RATING* micr. 150
MIN./MAX WORKING PRESSURE bar 1,5/10
MIN./MAX WATER TEMPERATURE °C 5/30
MIN./MAX EXTERNAL TEMPERATURE °C 5/30
WATER CONSUMPTION FOR BACKWASH lt 8-10 (@3bar)
CLEANING INTERVAL hours short cycle (2 - 4 - 6 - 8) - long cycle (12 - 24 - 36 - 48)
DIFFERENTIAL PRESSURE SWITCH bar 0,5
HOUSING MATERIAL INOX304 STAINLESS STEEL
CARTRIDGE MATERIAL INOX304 STAINLESS STEEL
BRUSHES MATERIAL NYLON-SILVER
TRANSFORMER** V 230/18
WEIGHT kg 7,2 7,5 10 13 7,2 7,5 10 13
Models with flanged connections (DN40/50/65/80) are also available. Visit our web-site to find further information, or contact our technical dpt.* Available on demand other filtration degrees: 89 and 200 micron.** Available on demand 110/18 V transformer
CODE FT050FT060
FT052FT062
FT054FT064
FT056FT066
FT150FT160
FT152FT162
FT154FT164
FT156FT166
WIDTH (A) mm 310 310 310 310 310 310 310 310
CONNECTION HEIGHT (B) mm 365 365 438 438 365 365 438 438
TOTAL HEIGHT (C) mm 640 640 700 700 640 640 700 700
MINIMUM HEIGHT FROM GROUND (D) mm 500 500 700 700 500 500 700 700
DEPTH (E) mm 190 190 190 190 190 190 190 200
BravoMAX A - performances and technical data
QUOTES
Referential EU norms and EN standards BravoMAX A is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12, Standards UNI EN 13443:1 2007. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to domestic water, heating and cooling plants. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
BravoMAX automatic filter
Control Panel (optional)COD. 23022030
FT050/FT056 - FT060/FT066 FT150/FT156 - FT160/FT166
1 Cleaning and self-cleaning filters
200
10
16
230
150100
50
02
4
68
0
12
14
0 16
14
12
108
6
4
20
50
100150
200
230
MOTORE BLOCCO
ATTESA DUPLEX
ATTESADIFFERENZIALE
CONTROLAVAGGIO
ALIMENTAZIONE 123456 220 V
12345678
150
230
4
50
02
0
100
68
12
14200
16
10
220 V
0 16
14
12
108
6
4
20
50
100150
200
230
200
10
16
230
150100
50
02
4
68
0
12
14
12345678
150
230
4
50
02
0
100
68
12
14200
16
10
1
1
2
2
3
3
4
4
12
5
5 11
6
6 6 58
6 5 9
9
137
7
10
8
10
1010
Min. 400
Min. 400
38
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. BravoMAX A Filter; 9. Treated water outlet; 10. Discharge; 11. Solenoid valve for back wash; 12. Control panel; 13. Filter power feeder
Installation scheme without control panel
Installation scheme with control panel
Options In order to get the most effective washing during the BravoMAX cleaning phase it is necessary a 2 bars pressure on-line down-stream the filter. In case of this condition is not present, we advice to apply BravoMAX filter with a closing solenoid valve for back wash.
Control panelIt is available a control panel (optional) which is able to manage simply BravoMATIC and BravoMAX A filters. The control panel is powered by a transformer 12/24 Vac and manage directly a filter and up to nr.2 solenoid valves 24 Vac. For BravoMATIC filters is generally sufficient to install a closing solenoid valve (for back wash) placed at the filtered water outlet thus to create ideal pressure for back wash of filter. Other contacts can be used to open by-pass valves or to manage back wash pumps. In BravoMAX A filters may be necessary to control two solenoid valves: one for closing (as suggested for BravoMATIC) and an-other for managing discharge and facilitating the removal of dirt, suitable for particularly dirty water.
Closing solenoid valve for back washThe control panel can manage 24 VAC closing solenoid valve for a more effective backwash operation. Closing solenoid valves are available with connections from ¾” (cod. EVC001) up to 2” (cod. EVC005).
Discharge elctrovalveThe control panel can also manage a 24 Vac discharge solenoid valve with connection of ¾” (cod. 23008004) to facilitate the drainage of dirt accumulated inside the filter.
BravoMAX filter with EV orderBravoMAX filter equipped with discharge solenoid valve may be ordered, indicating “:/EV” in addition to the filter code.
Automatic filters - industrial
39
Water softener…for the water hardness reductionOne of the crucial problem of the hydraulic plants is represented from the scale deposits formation caused from the water hardness.The scale settles on pipes, boilers and water heaters obstructing them, reducing the efficiency, and increasing energetic costs and maintenance costs.Moreover, the scale deposits on bath tubs and showers, sinks, taps, create unaesthetic stains. But this is not all: hard water does not allow to well clean skin and clothes because of incrusting salts deposits that require also a higher use of detergents and soaps. The water softening represents the technology that offers the greatest guarantees of success in the prevention of scale deposits. ACQUA BREVETTI 95 offers a smart and clever water softener mono-block for domestic uses.
2 Water softener
40
Scale reduction for residential use
BravoCAB
Volumetric water softeners
Overview
The BravoCAB water softeners contain ion exchange resins that hold selectively the calcium and magnesium ions (responsible for the incrustation formation) releasing sodium ions into the water. With the hardness regulator into the valve is possible to modulate hardness value in the water softener outlet. Once exhausted the exchange capacity, the exchanging resins are regenerated using the sodium chloride (salt). The BravoCAB water softeners are completely automatic and they manage automatically the working regenerating phases, being able to save up the 50% of salt and water consumption compared to the common water softeners. The use of softened water leads to a series of advantages: it reduces scale incrustation on the pipes, in the boilers and in the household appliances, it reduces energetic and detergents consumption allowing to save up to the 15% of energetic costs. The softened water, moreover, has restoring effect on the incrusted surfaces which eliminate, over the time, the scale concentration already existing. BravoCAB is a mono-block water softener realized for reducing water hardness protecting hydraulics household plants, vapor producers and cooling plants, humidification plants, washing machines and laundries, processing hydraulic plants.
Softening advantagesUse BravoCAB means benefit of:save up to the 15% on the energetic costs;reduction of reparation and maintenance costs;no scale stains on taps, shower etc.;
no incrustation on pipes, household and boilers;consumption reduction on detergents up to 50%. save up 50% of salt and water consumption during regeneration phase.
41
Main characters Thanks to their technical innovative design, the BravoCAB water softeners combine the clever functioning and their huge simplicity, allowing to reduce the consumption of water and salt during regeneration. The water softeners BravoCAB Acqua Brevetti are distinguished from the common water softeners for some noteworthy characteristics.
SimplicityThe control valve can be dismounted bare-handed and in few gestures; it is realized in certified food grade plastic material and it is realized with the 30% of pieces less than the other control valve normally available in the market. There is no part of the valve, in particular the parts into contact with water, that are realized with metal materials, to exclude corrosion problems and the consequent releasing of metals (copper, zinc metal, lead) in the water. BravoCAB is extremely simple to program: it takes only few seconds requiring only two parameters: time and water hardness. This allows to simplify the procedure of the installer.
BravoCAB is able to use resins with different variable regeneration levels which are automatically and cleverly established from the electronic on the basis of the real consumption. In this way the water softener tares itself automatically on the specific needs of the customer, consuming only the water and salt strictly necessary. This guarantee a save up of salt up to 47% and a save up of 50% of water compared to the other traditional water softeners, which are not equipped with the electronic control valve of BravoCAB.
EfficiencyThe regeneration of the resins is done proportionally to the effective consumption and it is made in countercurrent for a efficient and complete regeneration of the resins.
Dry brine tank The brine tank is normally dry and it is filled only when the regeneration time occurred. This avoids the formation of brine bridges and this reduces the uncontrolled water leaks risks.
SafeBravoCAB is endowed with by-pass and chlorine producer for the disinfection of the resins for a certified hygienic quality. Moreover BravoCAB performs a regeneration at maximum every 4 days. The maintenance of the statistic data and of programming, even if the power supply becomes less, it is ensured by a permanent memory. BravoCAB is compliant to Italian regulation in force for human consumption. Hardness regulator is integrated in the by-pass, completely made in corrosion resistant plastic material, and it is mounted with the auxiliary of clips. BravoCAB is equipped also with a harness tester to check the water harness on the exit of the water softener.
Text for offerBravoCAB , innovative water softener for the scale reduction. BravoCAB combines the clever functioning and the high simplicity. The controller valve is simple to program, it requires to set only time and water hardness, and it is so simple that can be dismounted to bared-hand. The clever electronic that composes the control valve allows to save up 50% of water and salt consumption during the regeneration phase, compared to the traditional and commons water softeners, availing of the variable regenerative level which adapts to the real end user consumption, detecting continuously consumption and statistics (then, inserts data of the model chose).
Referential NormsBravoCAB is manufactured in compliance with the Italian decree D.M.174/04, and D.M.25/12.The Italian Decree D.P.R. N°59/09, decree D.M.N°37/08, standards UNI CTI 8065, UNI CTI 884, UNI CTI 7550 prescribe the installation of protecting filter in the water inlet to domestic water, heating and cooling plants. Acqua Brevetti works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 901:2008 with certificate 501007368 issued by TUV Italy Sud.
CODE CD10409 CD10411 CD10415 CD10422
RESINS VOLUME liters 09 11 15 22
INLET-OUTLET CON BY-PASS connection 1”M 1”M 1”M 1”M
NOMINAL FLOW RATE (DP=0,2 BAR) A 0°F m3/h 0.9 0.9 1.4 1.8
PEAK FLOW RATE (DP=1 BAR) m3/h 2.0 2.0 2.0 2.0
EXCHANGE CAPACITY m3 x °f 26-38-49 28-45-61 43-73-102 89-155-183
SALT CONSUMPTION Kg 0.5-0.8-1,5 0.4-0.8-1.6 0.7-1.4-3.6 1.2-3.4-5.6
MIN./MAX WORKING PRESSURE Bar 1.5-9.0 1.5-9.0 1.5-9.0 1.5-9.0
MIN./MAX WATER TEMPERATURE °C 5-50 5-50 5-50 5-50
POWER SUPPLY VOLTAGE V-Hz 220/24 – 50/60 220/24 – 50/60 220/24 – 50/60 220/24 – 50/60
BravoCAB - performances and technical data
Scale reduction for residential use
3 Water softenerM
in. 4
86 m
m
Min. 405 mm
Min. 516 mm
Min
. 405
mm
Min
. 486
mm
Min. 405 mm
Min. 516 mm
Min
. 405
mm
Min
. 486
mm
Min. 405 mm
Min. 516 mm
Min
. 405
mm
42
Scale reduction for residential use
BravoCAB installation versatility
On high view Frontal BravoCAB positioning
On high viewLateral BravoCAB positioning
Adjustable By pass connectionupward/downward
CODE CD10409 CD10411 CD10415 CD10422
TOTAL HEIGHT mm A 531 695 840 1090
BY PASS CONNECTION WIDTH mm B 405 530 695 940
TOTAL WIDTH mm C 510 510 510 510
BY PASS DEPTH (TOTAL) mm D 400 400 402 402
BY PASS CENTER TO CENTER WIDTH DISTANCE mm E 60 60 60 60
BY PASS CENTER TO CENTER HEIGHT DISTANCE mm F 40 40 40 40
QUOTES
BravoCAB with bypass endowment
43
Dosing systemsSafe and proportional dosageThe presence of various substances in water may determinate unwanted features, such as: high value of hardness, pH different to neutrality, presence of bacteria, presence of dissolved oxygen. In these cases, it may be necessary to correct the characteristics of water dosing apposite chemical products through reliable and efficient dosing systems. Devices have to be installed before equipments or utilities to be protected. ACQUA BREVETTI 95 offers a range of dosing pumps capable to fulfill any need in dosage field.MiniDOS, BravaDOS and the new MiniDUE volumetric dosing pumps, specifically realized for the DHW treatment, are used for dosing small quantities of AcquaSIL 20/40® (for MiniDOS and BravaDOS) and of AcquaSIL 2/15® (for MiniDUE), an antiscaling and anticorrosive solution for the protection of boilers and pipes, guaranteeing the absolutely proportionality in the dosage.For dosing all other chemicals (see Linea AZ® and other chemicals) Acqua Brevetti offers a wide range of dosing devices, covering both industrial and civil fields: DosaNET C, DosaNET P, BravoTHERM feeding devices, BravoPROMAX and Bravo SOLAR PUMP.The Acqua Brevetti dosing systems may be used for the protection and cleaning of:-Central hot and cold water distribution plant-Heating and cooling systems-Process water distribution systems
3 Dosing systems
44
Anti-scaling and anti-corrosive systems for residential use
MiniDUEProportional and volumetric mechanical dosing pump for AcquaSIL 2/15®
Overview
Lime deposits and corrosion are crucial problems affecting domestic water installations. The proportional dosage of anti-scaling and anti-corrosive products is a safe and proven technology which helps in preventing scale deposition and corrosion processes. Polyphosphates, even at very low concentrations, are able to counteract the formation of scale and corrosion in water distribution lines. MiniDUE is a self-priming proportional mechanical dosing pump designed for the precise dosage of AcquaSIL 2/15®. AcquaSIL 2/15® is an aqueous solution of food grade polyphosphates specific for drinking water treatment and it has a double protective effect: it hinders the formation of scale deposits and it prevents the corrosion of metal components. Through a mechanism known as “threshold effect”, polyphosphates, even at concentration in the range of some ppm (the maximum concentration allowed in the drinking water is 5 ppm as P2O5) interfere with the carbonate crystallization phenomena hindering the formation of scale deposits. Polyphosphates also form a protective layer on metal surfaces protecting them from possible corrosion. AcquaSIL 2/15® is able to slowly dissolve old lime deposits restoring encrusted surfaces. MiniDUE assures a dosage of P2O5 always lower than the maximum limit (5 mg/l) allowed by current regulations.
Innovations brought by MiniDUEOne of the main innovations of MiniDUE is its innovative flexible tank for AcquaSIL 2/15®. A world first! A liquid anti-scaling refill which does not require any manipulation of chemicals: just replace the disposable flexible tank when it is empty. Further, the flexible tank can adapt to narrow and twisted spaces which would not permit the installation of any other equipment with rigid tanks. MiniDUE is endowed with a practical connecting kit for the remote installation of the flexible tank. Depending on needs two sizes of flexible tank are available: 250 gr and 1000 gr. Compared to MiniDOS, MiniDUE pump housing has been greatly reduced and the pumping system has been simplified. For its characteristics of easy handling and adaptability MiniDUE is particularly suitable for recessed boilers. MiniDUE is available in two different versions with ½” connections in order to satisfy any installation need for the treatment of the hot sanitary water.
Key features Compact dimensions Suitable for the recessed boilers Very flexible installation (it works even if installed reversed) Disposable refill bags of different sizes available (250 gr. - 1000 gr.) Remote installation: refill bags possible to install at distance (a world first!) Completely self-priming
Ultra precise proportional dosage (2≤3 ppm/lt) User friendly The best quality of polyphosphate (sodium hexametaphosphate) Dosing system patented in EU Complete made in Italy
Equipped with first disposable refill bag 250 gr
Equipped with remote connection Kit
45
Applications The hardness of water consists of dissolved salts of calcium and magnesium. The hardness is responsible for the formation of calcium and magnesium carbonates which, under certain conditions, can bring incrustations deposits on the tubes and the exchangers. Furthermore, the precipitation of carbonates leads to the formation of carbon dioxide, an acid substance that can cause the phenomena of corrosion. In presence of high value of hardness is necessary to dose polyphosphate in water, substances which, dosed in very small quantities, such as 3-4 ppm, is able to protect all the plant from scaling and corrosion, without affecting the potability of the water. The proportional dosage of polyphosphates ensures the protection against scaling and corrosion without modifying the mineral composition of water. MiniDUE volumetric mechanical dosing pumps has been created to dose AcquaSIL 2/15®, a food grade polyphosphate with various specific minerals salts solution for drinking water treatment. Polyphosphate keeps its effectiveness in waters with hardness up 30 °F and maximum temperatures of 60° C.
Text for offer MiniDUE is a self-priming volumetric pump, mechanical activated, designed for the service of single devices as household appliances and water heaters for domestic hot water protection. It doses AcquaSIL 2/15®, an aqueous solution of food grade polyphosphates specific for drinking water with double effect: it hinders the formation of scale deposits and it prevents the corrosion of metal components, being also able to slowly dissolve old lime deposits restoring encrusted surfaces. Its compact dimensions makes it of easy handling and makes it suitable also for installation in recessed boilers. Very user friendly, MiniDUE uses an innovative disposable flexible refill bag to contain AcquaSIL 2/15®, avoiding the manipulation of chemicals. MiniDUE is endowed with a practical connecting kit for the remote installation of the disposable refill bag, making MiniDUE suitable for installation in the narrowest and twisted spaces. Connection: ½”M with horizontal connections (code PM004), or with ½”F DIMA connections for off-line installation (code PM005). Maximum flow rate: 1000 lt/h. First AcquaSIL 2/15® refill bag of 250 gr. included in the packaging.
Anti-scaling and anti-corrosive systems for residential use
Referential EU norms and EN standardsMiniDUE is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 25/12. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the chemical conditioning of sanitary water. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
Polyphosphate salts solutionMiniDUE doses exclusively AcquaSIL 2/15®, an aqueous food grade liquid solution, able to hinders scale deposits and prevent corrosion of metal components. Through a mechanism known as “threshold effect”, polyphosphates, even at concentration in the range of some ppm (the maximum concentration allowed in the drinking water is 5 ppm as P2O5) interfere with the carbonate crystallization phenomena hindering the formation of scale deposits. Polyphosphates also form a protective layer on metal surfaces protecting them from possible corrosion. AcquaSIL 2/15® is able to slowly dissolve old lime deposits restoring encrusted surfaces.
CODE PM004 PM005
CONNECTIONS inches ½” M ½” F
MINIMUM FLOW RATE lt/h 1,5 1,5
NOMINAL FLOW RATE (DP=0.2 BAR) lt/h 1000 1000
DOSAGE (AS P2O5) mg/l 2.0±0,5
MIN-MAX WATER HARDNESS °f 5 - 30
MAX HEATING TEMPERATURE °C 60
250 GR REFILL AUTONOMY (WATER TREATED) m3 10-11
1000 GR REFILL AUTONOMY (WATER TREATED) m3 40-44
MIN-MAX WATER PRESSURE bar 1.5 - 6
MIN-MAX WATER TEMPERATURE °C 5 - 40CHEMICAL AcquaSIL 2/15®
Installation of MiniDUE cod. PM006 with remote Kit.
Installation of MiniDUE cod PM004 with 250 gr refill.
MiniDUE - performances and technical data
Equipped with: first disposable refill bag 250 gr and connection kit for the remote refill installation.
3 Dosing systems
EA
D
C
B
E
B
C
D
A
1 2 435 6 8 6 5
7
14 14
9
5 6 10 6 5
7
11
12
13
14
ACQUA BREVETTI
1 2 3
12 12
4 5 6 8 6 5
7
10
11
5 6 9 6 5
7
12345678
10
16
20014
12
86
100
0
20
50
4
230
150
0 1 2 0 1 2 0 1 2
ON
OFF
ON
OFF
ON
OFF
46
Installation scheme - Moderately hard water (e.g. below 25 °f)
Installation
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve 6. Sample tap; 7. By-pass valve; 8. Filter PuiliFIL; 9. MiniDUE ½" dosing pump; 10. Water heater; 11. Warm water outlet; 12. Cold water outlet; 13. Discharge
Installation scheme - Hard water (e.g. higher than 25 °f)
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. Filter PuiliFIL; 9. BravoCAB Softners; 10. MiniDUE ¾" dosing pump; 11. Water heater; 12. Warm water outlet; 13. Cold water outlet; 14. Discharge.
QUOTES
MiniDUE
CODE PM004 PM005
WIDTH (A) mm 90 58CONNECTION HEIGHT (B) mm 58 123TOTAL HEIGHT (C) mm 92 128MINIMUM HEIGHT FROM GROUND (D) mm 300 350
DEPTH (E) mm 82 93
PM004 PM005
47
Overview
According to the regulations in force, the dosage of antiscalant and anticorrosive for the treatment of drinking water should be proportional in any operational condition, assuring a dosage always lower than the concentration of 5 ppm as P2O5 per liter of treated water. ACQUABREVETTI 95 has realized a new equipment that doses SAFELY and PROPORTIONALLY.MiniDOS is a volumetric dosing pump for the proportional dosage of antiscalant and anticorrosive AcquaSIL 20/40® in drinkable water avoiding possible scaling and corrosion of hydraulic circuits.MiniDOS doses only AcquaSIL 20/40®. The dosage starts with a minimum withdrawal of 90 lt/h with injection frequency of 3.3 strokes/liter.
Key features Ultra precise dosage (3.5 ppm/lt) No need of power supply Very user friendly The best quality of polyphosphate (sodium hexametaphosphate)
Applications The hardness of water consists of dissolved salts of calcium and magnesium. The hardness is responsible for the formation of calcium and magnesium carbonates which, under certain conditions, can bring incrustations deposits on the tubes and the exchangers. Furthermore, the precipitation of carbonates leads to the formation of carbon dioxide, an acid substance that can cause the phenomena of corrosion. In presence of high value of hardness is necessary to dose polyphosphate in water, substances which, dosed in very small quantities, such as 3-4 ppm, is able to protect all the plant from scaling and corrosion, without affecting the potability of the water. The proportional dosage of polyphosphates ensures the protection against scaling and corrosion without modifying the mineral composition of water. MiniDOS volumetric mechanical dosing pumps has been created to dose AcquaSIL 20/40®, a food grade polyphosphate with various specific minerals salts solution for drinking water treatment. Polyphosphate keeps its effectiveness in waters with hardness up 30 °F and maximum temperatures of 60° C.
Dosing system patented Liquid solution ready-to-use Complete choose of mounting solutions Small dimensions and beautiful look Completely Made In Italy
Text for offer MiniDOS is a mechanical volumetric dosing device that works by hydraulic pumping system mechanically activated. It achieves proportional dosage in drinking water of AcquaSIL 20/40®, an antiscalant and anticorrosive solution. Thus, MiniDOS allows to prevent from formation of chalky encrustation and from corrosion in hydro-thermal-health distribution plant, and in general circuits with water to lose. In addition, the proportional dosage of AcquaSIL 20/40® is able to restore gradually plant already en-crusted. MiniDOS has been designed to protect single device as household appliance and water heater. AcquaSIL 20/40® keeps its effectiveness with water temperatures up to 60 ° C and water hardness from 5 °F to 30 °F. MiniDOS is provided of product storage tank with visual indication of antiscalant solution level. MiniDOS doses exclusively the product AcquaSIL 20/40®.
Anti-scaling and anti-corrosive systems for residential use
MiniDOSProportional and volumetric mechanicaldosing pump for AcquaSIL 20/40®
3 Dosing systems
BREVETTIACQUA
BC
EA
D
ACQUABREVETTI
E
B
A
D
C
85
67
48
CODE PM008 PM008+AV017 PM009
CONNECTIONS inches ½”M ½”F ½”F
MIN/MAX WORKING PRESSURE bar 1.5/6
MIN. WATER TEMPERATURE °C 5
MAX. WATER TEMPERATURE (inside pump) °C 40
MIN/MAX WATER HARDNESS °f 5-30
ΔP (max. flow rate) bar 0.5
MIN. FLOW RATE lt/h 90
MAX. FLOW RATE lt/h 1000
FRAQUENCY OF INjECTIONS strokes/lt 3.0
P2O5 CONCENTRATION IN WATER mg/l 3.5
CHEMICAL AcquaSIL 20/40®
TANK VOLUME cc 250
AUTONOMY (WATER TREATED FOR TANK RECHARGE) m3 10
LEVEL INDICATION VISUAL
CODE PM008 PM008
WIDTH (A) mm 90 70
CONNECTION HEIGHT (B) mm 140 205
TOTAL HEIGHT (C) mm 175 210
MINIMUM HEIGHT FROM GROUND (D) mm 300 350
DEPTH (E) mm 110 115
PM009 AV017
140
PM008
Model PM009 - DIMA conn.Model PM008 Model PM008 with connection kit
Anti-scaling and anti-corrosive systems for residential useMiniDOS - performances and technical data
QUOTES
12345678
150
230
4
50
02
0
100
68
12
14200
16
10
50
2 140
200
230
0 16
6
4 12
100150
108
OFF
ON
OFF
ON
OFF
ON
210210210
ACQUABREVETTI
1 2 3 4 5 6 8
7
13
9
10
11
12
49
Referential EU norms and EN standardsMiniDOS is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 443/90. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the chemical conditioning of sanitary water. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
Polyphosphate salts solutionMiniDOS doses exclusively AcquaSIL 20/40®, a combined solution of different salts, as 18% of P2O5. It is suitable to be used in food products specifically for the treatment of drinking water. AcquaSIL 20/40® is available in 1 liter bottle (code PC002) and in 5 liter tank (PC003).
BOILERS WASHING MACHINE
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. Filter; 9. MiniDOS dosing pump; 10. Water heater; 11. Warm water outlet; 12. Cold water outlet.
Installation scheme
Installation
Anti-scaling and anti-corrosive systems for residential use
3 Dosing systems
50
Anti-scaling and anti-corrosive systems for residential use
BravaDOSProportional and volumetric electronic dosingpump for AcquaSIL 20/40®
Overview
Acqua Brevetti 95 S.r.l. has designed BravaDOS, a volumetric electronic dosing pump for the proportional dosing of antiscaling and anticorrosive polyphosphate water solution AQUASIL 20/40® in drinkable water. BravaDOS guarantees an effective protection avoid scaling and corrosion of hydraulic circuits.The high injection frequency (3 strokes per liter of water) ensures high uniformity of dosage.BravaDOS is completely self-priming. Refill procedure is fast and clean: simply unscrew the green cap located on the storage tank, insert the charging funnel and pour AcquaSIL 20/40® inside.BravaDOS automatically starts and stops dosage when there is water withdrawal.BravaDOS starts to dose at a minimum flow rate of 30 lt/h and the proportional dosage is ensured up to 4200 lt/h (for 1” ¼ model). The pump is protected by the counter-pressure by a double check valve.
Key Features Ultra precise dosage (3.5 ppm/lt) Very user friendly Best quality of polyphosphate (sodium hexametaphosphate)
Applications The hardness of water consists of dissolved salts of calcium and magnesium. The hardness is responsible for the formation of calcium and magnesium carbonates which, under certain conditions, can bring incrustations deposits on the tubes and the exchangers. Furthermore, the precipitation of carbonates leads to the formation of carbon dioxide, an acid substance that can cause the phenomena of corrosion. In presence of high value of hardness is necessary to dose polyphosphate in water, substances which, dosed in very small quantities, such as 3-4 ppm, is able to protect all the plant from scaling and corrosion, without affecting the potability of the water. The proportional dosage of polyphosphates ensures the protection against scaling and corrosion without modifying the mineral composition of water. BravaDOS volumetric mechanical dosing pumps has been created to dose AcquaSIL 20/40®, a food grade polyphosphate with various specific minerals salts solution for drinking water treatment. Polyphosphate keeps its effectiveness in waters with hardness up 30 °F and maximum temperatures of 60° C. Regarding the protection of water distribution plants, the Eu Standard UN8065 expressly provides the dosage of conditioners to prevent and avoid the phenomenons of scaling and corrosion.
Liquid P2O5 solution ready to be used Safety sensor level Self-priming Completely Made In Italy
Text for offer BravaDOS is an electronic volumetric dosing pump working by hydraulic pumping system electronically activated. BRAVADOS achieves proportional dosage in drinking water of AcquaSIL 20/40®, an antiscalant and anticorrosive solution. Thus, BravaDOS allows to prevent from formation of chalky encrustation and from corrosion in hydro-thermal-health distribution plants, and in circuits with water to lose. Moreover, the proportional dosage of AcquaSIL 20/40® is able to restore gradually tubes already encrusted. AcquaSIL 20/40® keep its effectiveness with water temperature up to 60° C and with water hardness from 5° F to 30° F. BravaDOS dosing system is in compliance with all EU norms and technical standards. It is provided of product storage tank with level sensor to prevent dry running. The low quantity of product in the tank is indicated by the red led in the front and by acoustic signal. BravaDOS doses exclusively AcquaSIL 20/40®.
D
C
EA
B
D
C
EA
B
DBC
A E
D
E
CB
A
51
Anti-scaling and anti-corrosive systems for residential use
CODE PM010 PM012 PM014* PM016*
CONNECTIONS inches ½”M ¾”M 1”M 1”¼M
MIN./MAX WORKING PRESSURE bar 1.5/6
MIN. °C 5
MAX. WATER TEMPERATURE (inside pump) °C 40
ΔP (max. flow rate) bar 0.5
MIN./MAX. WATER HARDNESS °f 5-30
MIN. FLOW RATE lt/h 30 60 90 120
MAX. FLOW RATE lt/h 1500 2500 3600 4200
INjECTION FREQUENCY strokes/lt 3.5 2.5 2.0 2.0
2-TOILETS APARTMENT (WARM+ COLD WATER) COVERED N° 1 2 3 4
P2O5 CONCENTRATION IN WATER mg/l 3.5
CHEMICAL AcquaSIL 20/40®
TANK VOLUME cc 500 1000 2500 2500
AUTONOMY (WATER TREATED FOR TANK RECHARGE) m3 22 47 120 120
ELECTRIC FEED 230 V; 50-60 Hz; 1 VA
SAFETY SENSOR LEVEL YES
BravaDOS - performances and technical data
QUOTES
CODE PM010 PM012 PM014 PM016
WIDTH (A) mm 90 185 230 235
CONNECTION HEIGHT (B) mm 210 225 320 320
TOTAL HEIGHT (C) mm 282 282 380 380
MINIMUM HEIGHT FROM GROUND (D) mm 360 450 600 600
DEPTH (E) mm 110 120 170 170
PM010
PM014
PM012
PM016
* Possible to install also vertically
3 Dosing systems
12345678
150
230
4
50
02
0
100
68
12
14200
16
10
220 V
50
2 140
200
230
0 16
6
4 12
100150
108
OFF
ON
OFF
ON
OFF
ON
210210210
1 2 3 4 865
7
13
13
9
10
11
12
220 V
0 1 2 0 1 2 0 1 2
ON
OFF
ON
OFF
ON
OFF
810
150100
124
6
160
230
200
0142
50
220 V
150
230
4
50
02
0
100
68
12
14200
16
10
12345678
220 V
8
7
4321
14
14
14
9
11
12
131065
52
Anti-scaling and anti-corrosive systems for residential useReferential EU norms and EN standardsBravaDOS is manufactured in compliance with the Italian decree D.M. N°174/04, article 9 of the Italian decree D.L. N°31/01, Italian decree D.M. N° 443/90. The Italian decree D.P.R. N°59/09, decree D.M. N°37/08, standards UNI CTI 8065, UNI CTI 8884, UNI CTI 7550 prescribe the chemical conditioning of sanitary water. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl.
Polyphosphate salts solutionMiniDOS doses exclusively AcquaSIL 20/40®, a combined solution of different salts, at 18% of P2O5. It is suitable to be used in food products specifically for the treatment of drinking water. AcquaSIL 20/40® is available in 1-liter bottle (code PC002) and in 5-liter tank (PC003).
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. Filter; 9. BravaDOS dosing pump; 10. Water heater; 11. Warm water outlet; 12. Cold water outlet.
Legenda1. Cold water inlet; 2. Inlet water meter; 3. Pressure reducer; 4. Backflow prevention device; 5. Zone valve; 6. Sample tap; 7. By-pass valve; 8. Filter; 9. Softener; 10.BravaDOS dosing pump; 11. Water heater; 12. Warm water outlet; 13. Cold water outlet; 14. Discharge.
Installation scheme in case of water with hardness less than 25 °F
Installation scheme in case of water with hardness above than 25 °F
53
Dosing stations for general purposes
Diaphragm electronic pumpsSolenoid pumps
Overview
Acqua Brevetti 95 s.r.l. offers a complete line of diaphragm electronic pumps and accessories which allows to meet the needs of dosage in primary water treatment. The metering pumps Acqua Brevetti 95 s.r.l allow to perform constant dosing, proportional to the water flow or with schedulable timing by daily scale. The pumps are available in both analogue and digital. The accessories allow to adapt the dosing pumps at a dose of product including sodium hypochlorite and hydrogen peroxide. The rationalization of the components allows to easily assemble dosing stations even of considerable size. The careful choice of pump and related accessories allows to meet most of the requirements of dosing. The storage tanks of chemicals, complete with level probe, are available with volumes from 50 to 1000 liters while the water meters are available with connections from ½ “up to DN150. Agitators are also available for the homogenization of the products as well as a complete set of accessories for the regulation and management of the dose (back pressure valve, priming device, flow sensor, multi-function valve).
AKL COSTANT DOSING PUMP
APG PROPORZIONAL DOSING PUMP
PurposeThe metering pumps may be used for the dosage of polyphosphates anti-corrosive and anti-fouling, solutions of sodium hypochlorite in the civil sector or for the dosage of sanitizing agents, anti-fouling and anti-corrosive in evaporative cooling towers, cooling systems, boilers or other industrial applications.
FeaturesDepending on the model there are three different hydraulic: Hydraulics 500 ideal for small doses, is able to process flow up to 1.5 l / h with counter pressure up to 20 bar. Hydraulics 603 ideal for intermediate doses, is able to process flow rates up to 8 liters / h with counter pressure up to 12 bar Hydraulics 803 ideal for high doses, is able to process flow up to 54 l / h with counter pressure up to 5 bar.
CODE MODEL PRESSURE bar FLOW lt/h CONN.mm FREQUENCY imp/min SEALS KIT
PM040 PUMP AKL 603 NHP 12-10-8-2 4-5-6-8 4/6 160 Kit PVC
PM042 PUMP AKL 603 NHH 12-10-8-2 4-5-6-8 4/6 160 Kit PVDF
PM058 PUMP AKL 803 NHP 5-4-2-1 20-25-40-54 8/12 300 Kit PVC
CODE MODEL PRESSURE bar FLOW lt/h CONN.mm FREQUENCY imp/min SEALS KIT
PM062 PUMP APG 603 NHP 12-10-8-2 4-5-6-8 4/6 160 Kit PVC
PM063 PUMP APG 603 NHH 12-10-8-2 4-5-6-8 4/6 160 Kit PVDF
Manual setting, analogical interface, proportional dosage with digital or analogue signal.
Constant dosage and analogical interface.
3 Dosing systems
54
Dosing stations for general purposesTPG PROPORZIONAL DOSING PUMP
TCK TIMED DOSING PUMP
CODE MODEL PRESSURE bar FLOW lt/h CONN.mm FREQUENCY imp/min SEALS KIT
PM056 PUMP TPG 603 NHP 12-10-8-2 4-5-6-8 4/6 160 Kit PVC
PM066 PUMP TPG 603 NHH 12-10-8-2 4-5-6-8 4/6 160 Kit PVDF
PM055 PUMP TPG 500 NHH 20-16-10-6 0.4-0.8-1.2-1.5 4/7 - 4/6 120 Kit PVDF
CODE MODEL PRESSURE bar FLOW lt/h CONN.mm FREQUENCY imp/min SEALS KIT
PM054 PUMP TCK 603 NHP 12-10-8-2 4-5-6-8 4/6 160 Kit in PVC
PM044 PUMP TCK 603 NHH 12-10-8-2 4-5-6-8 4/6 160 Kit in PVDF
Manual setting, analogical interface, proportional dosage with digital or analogue signal.
Constant or timed dosage.
Accessories
CB THREADED PULSE WATER METER Water meter for cold water (up to 30°C), single stream (for ½” and ¾”) and multi stream (up to 2”).
WE FLANGED PULSE WATER METER Axial eddy water meter. Flanged UNI PM 10/16 for hot water up to 30°C.
SER EMPTY TANK HPDE tank for the storage of various chemicals of different capacity (60-120-220-325-550-1070 liters).
MULTI FUNCTIONAL VALVE Counter pressure valve, antisiphon valve, discharge valve inflow, protection valve. Connector for pipes 6/8. security pressure.
FLOW SENSOR Dosage sensor. Body in PVC and seals in FPM. Connections 4/6
PRIMING AID Priming device for low flow pumps or high elevations (from 1,5 meters) Body in PVC and guarnish in FPM.
COUNTER PRESSURE VALVE Allow the maintenance of constant pressure during the dosage. Max pressure: 10 bar - min pressure: 0,5 bar. Body in PVC, connections 4/6.
FLASK TANK 20 mm PVC flask for the correct installation of dosing stations and agitators on HDPE tanks SER models. Body in PVC, membrane in PTFE, guarnish in FPM or EPDM.
SUCTION NOZZLE WITH FEELER Preassembled suction nozzle. Connection 4/6 for tank model SER. Complete of: filter, non-return valve and feeler to stop the pump in case of empty tank.
AGITATOR Agitator (1400 rpm) single-phase in PVC for mixing chemical products in tank model SER.
55
Dirt separator with dosing point for heating systems
BravoTHERM 500Dirt separator filter for in-line installation in closed-loopheating systems with dosing point for AZ® products.
Overview
BravoTHERM 500 is composed by a brass head and a plastic bowl resistant up to 80 °C and 6 bars.The filtering media is a net with a particular shape having a filtration rate of 1000 microns and a high specific filtration surface which allows an effective removal of dirt which is driven by the conical shape of the bowl, toward the bottom of the filter where it is located the high flow discharge valve. In the upper brass head of the filter it is located the dosing point for chemicals.
Applications
In closed-loop heating systems deposits of various types may be formed: limestone, oxides, flakes of rust and slime. This material is commonly referred to as “sludge” and it can cause different problems: blocking of valves and regulators, failure of circulators, cold spots in radiators and floor panels. Deposits can cause the onset of dangerous forms of corrosion. Sludge decreases thermal efficiencies, increasing fuel consumption and lowering the life of all components of the heating system. The first action is thus preventing the formation of sludge and deposits by properly cleaning and protecting heating systems with specific corrosion, scale and fouling inhibitors such as those of the AZ® line. Both new and old heating systems should be periodically cleaned, especially if they have never been protected with any specific corrosion and scale inhibitors. For proper cleaning of closed loop heating systems you can choose among the cleaning products of the AZ® line such as AZ® 2000, AZ® 3000, AZ® 4000 and AZ® 7000 depending on the specific problem (see detailed data sheets for each AZ® product). For proper protection against corrosion and scale you can choose among the protecting products of the AZ® line such as AZ® 1000, AZ® 5000 and AZ® 6000 depending on the specific type of closed-loop heating system. The easiest way to load both cleaning and protecting products in closed-loop heating systems of small size (up to 2 flats) is BravoTHERM 500 which combines the functions of a dirt separator filter and a dosing point for chemicals. The particular inner design of BravoTHERM 500 allows the efficient and easy removal of particulate matter and dirt by a combined mechanical and gravitational action. BravoTHERM is easy to disassemble and to clean in case of clogging. BravoTHERM 500 can be installed both in-line in small applications (up to 1 flat) for both filtering and adding chemicals. For larger installations (2-3 flats) BravoTHERM 500 should be installed in by-pass and used only as adding point for chemicals.
3 Dosing systems
OFF
ON
OFF
ON
OFF
ON
210210210
2
1 3
4 4
7
8 8
5
6LIN
EA AZ
56
CODE TT010 TT012
IN/OUT CONNECTIONS inches ¾” F 1” F
FLATS units 1 2
FILTER CAPACITY liters 0.5
MAX TEMPERATURE °C 80
MAX PRESSURE bar 6
BravoTHERM 500 - performances and technical data
Installation scheme
Dirt separator with dosing point for heating systems
Legenda1. Boiler tap water feed; 2. Boiler; 3. Sanitary hot water outlet; 4. Closing valve; 5. By-pass valve; 6. AZ® additive; 7. BravoTHERM 500; 8. Drain.
CODE TT010 TT012
WIDTH (A) mm 100 100
CONNECTION HEIGHT (B) mm 252 252
TOTAL HEIGHT (C) mm 305 305
MINIMUM HEIGHT FROM GROUND (D) mm 400 400
DEPTH (E) mm 90 90
A
D
E
BC
QUOTES BravoTHERM 500
TT010, TT012
57
Dirt separator with dosing point for heating systems
BravoTHERM 600 650Dirt separator filter for in-line installation in closed-loopheating systems with dosing point for AZ® products.
Overview
BravoTHERM 600 and 650 are filled with special inert materials which offer an high filtration efficiency with low heat losses and ease in backwashing.Once the filtering capacity of the filter is exhaust (increase in head losses) it is possible to back wash filter using tap water. BravoTHERM 600 and 650 head is equipped with multiway manual valves which allow the fast backwash of the filter with tap water without any loss of the precious thermal fluid present inside the heating system.BravoTHERM 600 and 650 is also equipped with a drain valve which allows to eliminate any foreign matter accumulated in the filtering masses, during backwashing. In addition a Venturi system allows the rapid filling of large amounts of chemicals directly from bottles or tanks.BravoTHERM 600 and 650 are composed by a fiberglass reinforced tank filled with special inert filtrating media. The head is equipped with a manual multiway valve which allows to rapidly switch from service position to back wash position and to chemicals filling position. BravoTHERM 600 and 650 are fast to be installed and serviced.
Applications
In closed-loop heating systems deposits of various types may be formed: limestone, oxides, flakes of rust and slime. This material is commonly referred to as “sludge” and it can cause different problems: blocking of valves and regulators, failure of circulators, cold spots in radiators and floor panels. Deposits can cause the onset of dangerous forms of corrosion. Sludge decreases thermal efficiencies, increasing fuel consumption and lowering the life of all components of the heating system. The first action is thus preventing the formation of sludge and deposits by properly cleaning and protecting heating systems with specific corrosion, scale and fouling inhibitors such as those of the AZ® line. Both new and old heating systems should be periodically cleaned, especially if they have never been protected with any specific corrosion and scale inhibitors. For proper cleaning of closed loop heating systems you can choose among the cleaning products of the AZ® line such as AZ® 2000, AZ® 3000, AZ® 4000 and AZ® 7000 depending on the specific problem (see detailed data sheets for each AZ® product). For proper protection against corrosion and scale you can choose among the protecting products of the AZ® line such as AZ® 1000 depending on the specific type of closed-loop heating system. BravoTHERM 600 and 650 dirt separator filters are successfully installed in closed-loop heating systems in order to effectively remove sludge with very limited head losses. They are also equipped with a dosing point for the fast filling of large amounts of both cleaning and protecting AZ® products. BravoTHERM 600 and 650 assures an heating system clean protecting the most sensible parts such as recirculation pumps, valves, heat exchangers.
3 Dosing systems
AZ
220 V
132
1
12
3
9
8 7 3
6
54
3
10
11
14 14 14
58
Dirt separator with dosing point for heating systemsInstallationBravoTHERM 600 e 650 filters must be installed only in by-pass position (see figure below) in the lower and colder part of the closed-loop heating system. It is compulsory the installation of closing valves in the inlet and outlet of the closed-loop heat water (upstream and downstream BravoTHERM 600 and 650) and in the tap water inlet for backwashing. These valve are not supplied with BravoTHERM 600 e 650. When installing BravoTHERM 650 it is necessary to install a circulating pump (head 0.5 bar, flow rate: 1 m3/h) upstream fo BravoTHERM 650. For a proper installation it is compulsory to strictly observe all indications supplied in the Instruction manual. BravoTHERM 600 e 650 must be installed exclusively by specialized personnel complying with local regulations.
WarningsBravoTHERM 600 e 650 must be installed in a technical room with a sufficient space for installation and servicing. The periodic backwashing of BravoTHERM requires the presence of a water drain and tap water. The filter must be protected form frost and direct sunlight. Avoid oils, acids, solvents, alkalis and aggressive detergents come into contact with both inner and outer parts of BravoTHERM 600 e 650.Pressure and temperature levels of the water in the closed-loop heating system must not exceed the maximum values indicated in the Technical data table (see below). In order to assure proper working BravoTHERM 600 e 650 should be checked at least twice a year.
BravoTHERM 600 and 650 description for offersDirt separator filter for in-line installation in closed-loop heating systems with dosing point for AZ® products. BravoTHERM 600 and 650 eliminate sludge and particulate matter from the system protecting sensible part such as circulating pumps, valves, heat exchanger assuring high flow efficiency and preventing blocking. BravoTHERM 600 e 650 must be installed in the return line in the lowest and coldest part just upstream the boiler. BravoTHERM 600 e 650 is filled with special inert filtering media which effectively remove particulate matter and sludge without impairing flow rates. BravoTHERM 600 and 650 is equipped with multiway head valves which allow the rapid switching from service to backwash position. BravoTHERM 600 e 650 is equipped with a specific system for the rapid charging of large amounts of AZ® cleaning and protecting products.
Legenda1. Closed-loop water inlet 2. By pass valve 3. Closing valve 4. Circulating pump 5. Backwash pump 6. Dosing point 7. Venturi valve 8. Tap water inlet valve 9. Back-flow valve 10. BravoTHERM 600/650 11. Draining pipe 12. Tap water inlet 13. Return line 14. Drain
Installation scheme
59
BravoTHERM 600 650
CODE TT014 TT016
INLET/OUTLET CONNECTIONS inches ¾” F ¾” F
DRAIN CONNECTION inches ¾” F ¾” F
NUMBER OF FLATS units 1-20 21-50
NOMINAL FLOW RATE lt/h 400 600
MAXIMUM FLOW RATE lt/h 600 1100
MAXIMUM WATER TEMPERATURE °C 65
MIN/MAX ROOM TEMPERATURE °C 0-40
MAXIMUM PRESSURE bar 10
MINIMUM BACKWASH PRESSURE bar 2
PRESSURE RANGE bar 1.5-6
BACKWASH FLOW RATE lt/h 2500
BACKWASH - MANUAL
BravoTHERM 600 650 - performances and technical data
QUOTES
Dirt separator with dosing point for heating systems
TT014, TT016
CODE TT014 TT016
WIDTH (A) mm 350 350
CONNECTION HEIGHT (B) mm 964 1294
TOTAL HEIGHT (C) mm 1014 1344
DEPTH (E) mm 173 173
CB
EA
3 Dosing systems
60
Filling and flushing devices for central heating systems
BravoPROMAX 30 SUPAFLUSHPump for the recirculation, filling and flushing of closed loop heating circuits
Overview
BravoPROMAX 30 SUPAFLUSH has been developed for an easy cleaning of the whole heating plant. It removes water circulation problems due to slurry heaps, corrosion and scale deposits. It has been specifically developed for optimized the cleaning effects of the AZ® products. BravoPROMAX 30 SUPAFLUSH allows to quickly perform cleaning operation in heavily soiled heating plants, where the use of the sole circulator of the plant is not sufficient. It combines the mechanic cleaning action performed from the high washing flow rate (up to 5,4 m3/h) at low pressure and the detergent action of AZ® conditioning chemicals.BravoPROMAX 30 SUPAFLUSH is endowed of a practice flow inverter which allows to periodically invert the flux within the plant. This device permit to attack the obstruction on both sides, getting the removal more simple and rapid. Moreover, on the water return connection of the plant to the BravoPROMAX 30 SUPAFLUSH unit, it can be installed a filter with discharge which allows to unlock all the deposits detached from the plant, permitting a rapid and safe removal. BravoPROMAX SUPAFLUSH is equipped with 27 liter tank with a wide refilling opening to facilitate the pouring operation from tanks or barrels. The tank is equipped of bottom cap to facilitate emptying and cleaning operations.The refill system is endowed with fill port, flush port and deareation port with shutoff valves and flexible connecting hose. BravoPROMAX SUPAFLUSH pump is equipped with filter for intercepting scraps, soldering and welding residues. BravoPROMAX 30 SUPAFLUSH has been specifically developed for the use with the cleaning chemicals AZ® 3000 (universal product for new plants) and AZ® 4000 and AZ® 7000 (for old plants).
Text for offerPump for the replenishment and flushing of closed loop heating circuits, specific for the product AZ® 3000, AZ® 4000 and AZ® 7000. BravoPROMAX 30 SUPAFLUSH is equipped with a patented flow inverter for a quick and efficient cleaning of the heating plants. Tank capacity: 27 lt. Maximum flow rate: 5.5 mc/h. Hydraulic head: 2 bars.
BRAVO PROMAX 30 SUPAFLUSH - performances and technical data
CODE PD10005
TANK CAPACITY lt 27
MAX FLOW RATE lt/min 5400
MAXIMUM HEAD bar 2
QUOTES (HxWxD) mm 58x45x30
61
Bravo SOLAR PUMPPump for the filling and flushing of solar systems
Filling and flushing devices for central heating systems
Overview
Bravo SOLAR PUMP is the filling unit for solar thermal systems developed specifically to allow easy filling and flushing of solar systems with cleaning solutions and antifreeze based. A robust structure to cart with wheels facilitate the operation of the system Bravo SOLAR PUMP. Bravo SOLAR PUMP 250 and 300 are equipped with a 25-liter tank with large opening for easy filling from tanks or barrels. The tank is equipped with a bottom cap which facilitates the operations of emptying, purging and cleaning of the tank . The feeding pump is equipped with a fill port, flush port and deaeration with shutoff valves and pipes connecting hose. It can also be used a quick secondary intake valve that allows to suck the liquid directly from a tank without the need of pouring the reservoir. The Bravo SOLAR PUMP system is equipped with a filter for the detection of scraps and welding and soldering residues. The use of Bravo SOLAR PUMP makes the cleaning procedures, emptying, venting and filling of the solar plant more simple and it can be realized in a single action. It is also possible to adjust the pressure of the pump casing according to the requirements from 2 bar to 5 bar. The loading system Bravo SOLAR PUMP has been specifically developed for the loading of the protective solution specific for solar panels AZ® 6000, and AZ® 3000 for cleaning products (for new systems) or AZ® 4000 (for old systems). The loading system Bravo SOLAR PUMP can also be used to pump the thermal fluid exhausted (degraded) out of the system if there are no adequate points of discharge.
Bravo SOLAR PUMP - performances and technical data
Text for offerFeeding and cleaning pump for solar systems with manual pressurize pump and pressure gauge (50 bar). The tank capacity as 25 liters facilitate the filling and emptying of the plant. The system (Solar Pump 250 and 300) is mounted on a cart with wheels for a practical handling equipment. Flow rate 25 lt/min, head up to 5 bar.
SOLARPUMP 100 SOLARPUMP 250 SOLARPUMP 300
CODE PD10011 PD10009 PD10010
FEEDING PUMP AT HIGH EFFICIENCY WITH BODY IN CAST IRON AND DERLIN IMPELLER RESISTANT TO GLYCOLE • • •CONNECTING TUBES • • •FEEDING POINT WITH INTERCEPTION VALVE AND FLEXIBLE CONNECTING TUBE • • •UNDERCARRIAGE WITH SELF PROjECTING WHEELS • •25 LITERS TANK WITH WIDE FEEDING OPENING AND BOTTOM CAP FOR THE CLEANING • •WASHING DOOR / DEAERATION WITH FLEXIBLE CONNECTING TUBE • •LIQUID ASPIRATION VALVE FROM THE CANISTER (WITHOUT PASSING THROUGH THE TANK) •FILTER FOR THE INTERCEPTION OF SCRAPS, WELDING RESIDUALS •GAUGE •FEEDING PRESSURE REGULATION (FOR THE PRESSURE REGULATION OF PUMPING BODY FROM 2 TO 5 BAR) •QUOTES (HXLXP) 27x24x18 60x39x32 78x39x32
WEIGHT KG. 7,70 10,70 14,60
PRESSURE - MAX (BAR) 5 5 5
FLOW RATE - MAX LT/H 25 25 25
POWER HP 0,50 0,50 0,50
62
A new generation of chemicals
Chemicals and testing kitsHighest protection for plants, total safety for users and environmentThe presence of various substances in the water may caused unwanted water characteristics: high values of hardness bring to limescale deposits, pH values far from the neutrality and the presence of dissolved oxygen will bring corrosions phenomena, bacteria and micro-organisms which com-promise the potability of water. In all these cases it is necessary to correct water characteristics dosing specific chemicals by means of precise and reliable dosing systems. Acqua Brevetti offers a wide range chemicals to meet every requirement. We offer the following type of products: Chemical products for domestic water: specific products based on food grade polyphosphates for anti-corrosive and lime-scale treatment of drinkable waters.Chemicals for central heating systems conditioning: the new products line AZ® developed and tested to offer the best performance on domestic heating plants guaranteeing total safety for the users and environment. They are formulated with low environmental impact: they are non-acidic and non-caustic, biodegradable and do not contain substances hazardous to the health and the environment, such as nitrites, chromates, amines and phosphates. The range consists of seven products of protective and cleaners.Biocides chemical products: a range of products for Chemical biocidal product range able to avoid the development of microorganisms and to maintain sterile conditions in waters. Other chemicals: products for control of scale and corrosion, of iron and manganese, of chlorin-ated substances and sediments. Analysis kits and tools: Acqua Brevetti provides a full range of tools specific for monitoring chemi-cal and physical characteristics of water (pH, conductivity, temperature, iron, manganese, hard-ness, chlorine, etc.).. In particular there is a complete line of test kit for monitoring of central heating systems treated with AZ® line products.
AcquaSIL Line
63
AcquaSIL 2/15® Anti-scaling and anti-corrosive product for MiniDUE pump
Anti-scaling and anti-corrosive for drinking water
Overview
AcquaSIL 2/15® is an aqueous solution of food grade polyphosphates specific for drinking water treatment and it has a double protective effect: it hinders the formation of scale deposits and it prevents the corrosion of metal components. Through a mechanism known as “threshold effect”, polyphosphates, even at concentration in the range of some ppm (the maximum concentration allowed in the drinking water is 5 ppm as P2O5) interfere with the carbonate crystallization phenomena hindering the formation of scale deposits. Polyphosphates also form a calcium-phosphate-ferrous protective film on metal surfaces protecting them from possible corrosion. AcquaSIL 2/15® is able to slowly dissolve old lime deposits restoring encrusted surfaces. AcquaSIL 2/15® has proven effective with water having hardness in the range 5 °f and 30 °f and temperatures up to 60 °C. AcquaSIL 2/15® is not classified as dangerous by current legislation.
Key features The best quality of polyphosphate (sodium examethaphosphate) Scale controlCorrosion controlRed and black water control
Dosage and feeding AcquaSIL 2/15® should be dosed automatically and proportionally to the water flow rate. The quantity dosed by MiniDUE corresponds to 2±0,5 ppm of P2O5. AcquaSIL 2/15® can be used to protect hot and cold water production and distribution systems such as water heating or cooling in open loop circuits. AcquaSIL 2/15® is not effective to protect closed-circuit systems (heating and cooling). Do not use AcquaSIL 2/15® upstream of boilers with solar heating systems, the temperatures reached in these systems can lead to rapid degradation of the product resulting in loss of efficacy. AcquaSIL 2/15® is dosed upstream of equipment to be protected.
Contained in disposable refill flexible bags 250gr. and 1000 gr. availableNo manipulation of the product assuring maximum hygiene and no contact with air
Text for offer AcquaSIL 2/15® aqueous food grade polyphosphates solution, for the proportional dosage with MiniDUE pump. AcquaSIL 2/15® is employed for the protection of hot and cold water production and distribution systems such as water heating or cooling in open loop circuits, from scale deposits and corrosion that could lead damages to plants and control bodies. AcquaSIL 2/15® is contained in the innovative disposable flexible refill bags of 250gr. or 1000 gr. of size, avoiding the manipulation of the product.
Referential UE norms and EN standardsAcquaSIL 2/15® has been formulated using raw materials in compliance with Directive 2008/84/CE and standard UNI-EN 1212:2005. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl. The material safety data sheet prepared in compliance with Regulation n. 453/2010 is supplied with the product. The material safety data sheet is available in the website: www.acquabrevetti95.it.
CODE DESCRIPTION UNIT
PC100 AcquaSIL 2/15® 250 gr. Flexible disposable refill bag (n°4 in a package) 16
PC104 AcquaSIL 2/15® 1000 gr. Flexible disposable refill bag 5
AcquaSIL 20/15®
4 Chemical and testing kits
64
Overview
AcquaSIL 20/40® is an aqueous solution of food grade polyphosphates specific for drinking water treatment and it has a double protective effect: it hinders the formation of scale deposits and it prevents the corrosion of metal components. Through a mechanism known as “threshold effect”, polyphosphates, even at concentration in the range of some ppm (the maximum concentration allowed in the drinking water is 5 ppm as P2O5) interfere with the carbonate crystallization phenomena hindering the formation of scale deposits. Polyphosphates also form a calcium-phosphate-ferrous protective film on metal surfaces protecting them from possible corrosion. AcquaSIL 20/40® is able to slowly dissolve old lime deposits restoring encrusted surfaces. AcquaSIL 20/40® has proven effective with water having hardness in the range 5 °f and 30 °f and temperatures up to 60 °C. AcquaSIL 20/40® is not classified as dangerous by current legislation.
Key features The best quality of polyphosphate (sodium examethaphosphate) Solution ready to use
Dosage and feeding AcquaSIL 20/40® should be dosed automatically and proportionally to the water flow rate. The quantity dosed by MiniDOS or BravaDOS corresponds to 3.5±0,5 ppm of P2O5. AcquaSIL 20/40® can be used to protect hot and cold water production and distribution systems such as water heating or cooling in open loop circuits. AcquaSIL 20/40® is not effective to protect closed-circuit systems (heating and cooling). Do not use AcquaSIL 20/40® upstream of boilers with solar heating systems, the temperatures reached in these systems can lead to rapid degradation of the product resulting in loss of efficacy. AcquaSIL 20/40® is dosed upstream of equipment to be protected.
Scale controlCorrosion control Red and black water control
Text for offer AcquaSIL 20/40® aqueous food grade polyphosphates solution, for the proportional dosage with MiniDOS and BravaDOS pumps. AcquaSIL 20/40® is employed for the protection of hot and cold water production and distribution systems such as water heating or cooling in open loop circuits, from scale deposits and corrosion that could lead damages to plants and control bodies.
Referential UE norms and EN standardsAcquaSIL 20/40® has been formulated using raw materials in compliance with Directive 2008/84/CE and standard UNI-EN 1212:2005. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl. The material safety data sheet prepared in compliance with Regulation n. 453/2010 is supplied with the product. The material safety data sheet is available in the website: www.acquabrevetti95.it.
AcquaSIL 20/40®
CODE DESCRIPTION UNIT
PC002 AcquaSIL 20/40® kg.1 8
PC003 AcquaSIL 20/40® kg.5 4
AcquaSIL 20/40®
Anti-scaling and anti-corrosive for MiniDOS e BravaDOS pumps
Anti-scaling and anti-corrosive for drinking water
65
Overview
AcquaSIL 5/10 is a combined solution of various salts for the treatment of drinking water, suitable to prevent corrosion and scaling encrustations in domestic applications, such as:- Boilers and kettles- Pipes and distribution devices- Heating and cooling water in opened circuits.The action of AcquaSIL 5/10 is effective against salts of calcium and magnesium compounds, against encrustation, it is effective for protection against corrosion and it has restoring effects, visible after a period of use, strictly depending from the encrustation layer.
CODE PC001
STATE LIQUID
COLOUR COLOURLESS
ODOUR ODOURLESS
MAX. WATER TEMPERATURE °C 60
MIN./MAX. WATER HARDNESS °f 5-30
SPECIFIC WEIGHT kg/dm3 1.03-1.04 (@20°C)
pH 5.8
DOSAGE g/m3 70
TANK WEIGHT Kg 25
Key features Liquid solution ready to be use The best quality of polyphosphate (sodium hexametaphosphate) Cathodic corrosion control
Dosage and feeding AcquaSIL 5/10 can be dosed by dosing stations or solenoid proportional dosing pumps in quantity as 70 g/m3 (equal to 3.5 ppm of P2O5). AcquaSIL 5/10 is available in 25 Kg tank (COD. PC001). The use of AcquaSIL 5/10 is recommended with maximum temperature of 60 °C and water hardness below 30 °f; it should not be used in closed-loop systems.
Red & black water control Scale control Softening
Text for offer AcquaSIL 5/10 aqueous food grade polyphosphates solution, for the proportional dosage with solenoid pumps. AcquaSIL 5/10 is employed for the protection of hot and cold water production and distribution systems such as water heating or cooling in open loop circuits, from scale deposits and corrosion that could lead damages to plants and control bodies.
Referential UE norms and EN standardsThe product comply with DIRECTIVE 98/83/CE (“Quality of water intended for human consumption”) and standard UNI-EN 1212:2005. Acqua Brevetti 95 s.r.l. works with a Quality System certified in compliance with the requirements of the UNI-EN ISO 9001:2008 with certificate 501007368 issued by TÜV Italy Srl. The material safety data sheet prepared in compliance with Regulation n. 453/2010 is supplied with the product. The material safety data sheet is available in the website: www.acquabrevetti95.it.
AcquaSIL 5/10
AcquaSIL 5/10Anti-corrosive and anti-scaling for dosing stations (solenoid pumps)
Anti-scaling and anti-corrosive for drinking water
66
The best performance on the heating plant, with complete safety for user and environment
Practical Guide for AZ® Products use
AZ® LineChemicals for every kind of heating systems
67
NEW
ACTION PRODUCT AIMS DOSAGE AND APPLICATION
CLEANING AZ® 3000 Removing of oils, greases, silicones, wood chips, welding fluxes and processing residues
1 liter/100 liters - Make AZ® 3000 circulate into the plant of normal operating temperature by the plant circulator for 1 / 5 hours.
PROTECTION AZ® 1000 Anti-corrosive and anti-scaling protection 1 liter/100 liters
PROTECTION AZ® 5000 Antifreeze, anti-corrosion, anti-scaling and biocide protection.
At least 25 liters/100 liters
NEW
ACTION PRODUCT AIMS DOSAGE AND APPLICATION
CLEANING AZ® 3000 Removing of oils, greases, silicones, wood chips, welding fluxes and processing residues.
1 liter/100 liters - Make AZ® 3000 circulate into the plant of normal operating temperature by the plant circulator for 1- 5 hours.
PROTECTION AZ® 5000 Antifreeze, anti-corrosion, anti-scaling and biocide protection
At least 25 liters/100 liters
PROTECTION AZ® 1000 + AZ® BIOCID
Anti-corrosive and anti-scaling protection + biocide
AZ® 1000 1 liter/100 liters + AZ® BIOCID 1 liter/100 liters
NEW
ACTION PRODUCT AIMS DOSAGE AND APPLICATION
CLEANING AZ® 3000 Removing of oils, greases, silicones, wood chips, welding fluxes and processing residues
1 liter/100 liters - Make AZ® 3000 circulate into the plant of normal operating temperature by the plant circulator for 1- 5 hours.
PROTECTION AZ® 6000 Anti-corrosive, anti-scaling, antifreeze ALL-in-ONE product.
Fill completely the system with AZ® 6000, without any dilution
OLD
(m
ore
than
6 m
onth
s)
ACTION PRODUCT AIMS DOSAGE AND APPLICATION
CLEANING AZ® 4000 Removal of slime, oxides, rust, flaky material 1 liter/100 liters - Make AZ® circulate into the plant of normal operating temperature by high flow rate pumps BravoPROMAX 30 SUPAFLUSH, for at least 2/3 hours, according to the level of dirt.
PROTECTION AZ® 2000 Eliminating lime scale deposits (noise reducer) 1-5 litri/100 litri - Make AZ® circulate for 1-5 weeks into the plant of normal operating temperature
PROTECTION AZ® 1000 Anti-corrosive and anti-scaling protection 1 liter/100 liters
PROTECTION AZ® 5000 Antifreeze, anti-corrosion, anti-scaling and biocide protection
At least 25 liters/100 liters
OLD
(m
ore
than
6 m
onth
s) ACTION PRODUCT AIMS DOSAGE AND APPLICATION
CLEANING AZ® 7000 Removing of sludge, organic and biological deposits.
1 liter/100 liters - Make AZ® circulate into the plant of normal operating temperature by high flow rate pumps BravoPROMAX 30 SUPAFLUSH, for at least 2/3 hours, according to the level of dirt.
PROTECTION AZ® 5000 Antifreeze, anti-corrosion, anti-scaling and biocide protection all-in-one product.
At least 25 liters/100 liters
PROTECTION AZ® 1000 + AZ® BIOCID
Anti-corrosive and anti-scaling protection + biocide
AZ® 1000 1 liter/100 liters + AZ® BIOCID 1 liter/100 liters
OLD
(m
ore
than
6 m
onth
s) ACTION PRODUCT AIMS DOSAGE AND APPLICATION
CLEANING AZ®4000 Removal of slime, oxides, rust, flaky material 1 liter/100 liters - Make AZ® circulate into the plant of normal operating temperature by Bravo SOLAR PUMP, for at least 2/3 hours, according to the level of dirt.
PROTECTION AZ® 6000 Anti-corrosive, anti-scaling, antifreeze ALL-in-ONE product.
Fill completely the system with AZ® 6000, without any dilution, using the Bravo SOLAR PUMP.
Heating systems WITH RADIATORS AND MIXED (RADIATORS + PANELS)
Heating systems WITH RADIANT PANELS
Heating systems WITH SOLAR PANELS
4 Chemical and testing kits
68
Overview
AZ® 1000 is a ready to use aqueous solution of corrosion inhibitors and organic dispersants, suitable to protect metallic heating equipment stuff from corrosion and fouling. AZ® 1000 provides effective protection against all metallic materials commonly present in plants, including aluminum. Using AZ®
1000 also helps to prevent gas formation by helping to keep a high heating system efficiency, eliminating the problem of cold radiators and partially blocked pumps. AZ® 1000 is effective with all types of water, with high and low hardness. AZ® 1000 is a product easy to use, with low environmental impact, not containing amines, nitrites, phosphates and chromates.
Key features Protection against limescale and corrosion All system metals protection, including aluminium Ensures optimum boiler efficiency Avoid boiler noise Prevent gas formation
Dosage and feeding The optimal dose of AZ® 1000 is of 1 liter per 100 liters of water. Before loading the system with AZ® 1000, it is advisable to make cleaning and rinsing of the system. A new plant should be adequately treated with AZ® 3000. The old plants should be treated either with AZ® 2000 in the case of lime scale, or with AZ® 4000 in the case of rust and magnetite sludges. Check at least once a year the effective protection level using the AZ® 1000 analysis kit (cod. 48105002). AZ® 1000 can be introduced directly in the plant using the BravoTHERM feeding device, through the vent valve of a radiator, into the expansion tank of the system, or by dosing stations solenoid pump. Available in 1 lt bottle, 3 lt tank and 25 lt tank.
Neutral pH formulation, easy to handle Low environmental impact, non-toxic and biodegradable Do not contain phosphates, chromates, amines or nitrItes Available in 1 lt, 3 lt and 25 lt packaging
Text for offer AZ® 1000 protective product for scale and corrosion control in all central heating systems including those containing parts in aluminum. It is effective with all types of water, both with high and low value of hardness. AZ® 1000 is a low environmental impact formulation not containing: phosphates, chromates, amines or nitrItes.
Safety informationFor more information on safety, transportation, storage and handling of AZ® 1000 read the safety data sheet available in our web site.
AZ® 1000Protective, anti-corrosive and anti-scaling for central heating systems
Chemicals for central heating systems
CODE PC1001 PC1002 PC1003
STATE LIQUID
COLOUR PALE YELLOW
ODOUR ABSENT
pH (1%) 7.5
DENSITY REL. 1.03 - 1.07
DOSAGE (lt/100lt) 1 LITER PER 100 LITERS OF WATER
VOLUME (LITERS) 1 3 25
AZ® 1000
69
CODE PC2001 PC2002 PC2003
STATE LIQUID
COLOUR PALE YELLOW
ODOUR ABSENT
pH (1%) 7.5
DENSITY REL. 1.03 - 1.07
DOSAGE (lt/100lt) 1 LITER PER 100 LITERS OF SYSTEM WATER
VOLUME (LITERS) 1 3 25
Overview
AZ® 2000 is a ready to use non-acidic product suitable to eliminate lime scale deposits from boilers and heating systems. The formulation of AZ® 2000 - based solely on non-acidic organic compounds - allows a safe use in any plant, including those containing aluminum. The use of AZ® 2000 helps to prevent and control the problems of noise and reduced heat transfer caused by the presence of limescale in the system.AZ® 2000 is a product easy to use, with low environmental impact, not containing amines, nitrites, phosphates and chromates.
AZ® 2000Restoring product for heating system calcium deposits
Chemicals for central heating systems
Key features Cleaner for calcium deposits Non-acidic, safe for metallic parts Eliminate boiler noise Restores boiler efficiency
Dosage and feeding The optimal dosage of AZ® 2000 is 1 liter per 100 liters of system water. In order to keep the product concentration uniform in all parts of the plant is recommended to make the product run (the plant circulator is sufficient). Once treatment is done, rinse the plant and then fill it with AZ® 1000. If into the plant are also present slurries of rust and magnetite, it is advisable to follow the treatment with AZ® 2000 with a AZ® 4000 cleaning product treatment. Treatment can take a long time ranging from several days to some weeks, depending on the hardness and the quantity of lime scale present. AZ® 2000 can be introduced directly in the plant by means of the BravoTHERM feeding device, through the vent valve of a radiator into expansion tank of the system, or by a dosing stations.
No need to flush stays in system Low environmental impact, non-toxic and bio-degradable Do not contain phosphates, chromates, amines or nitrItes Available in 1 lt, 3 lt and 25 lt packaging
Text for offer AZ® 2000 is a non-acidic product based solely on non-acidic organic compounds suitable to eliminate calcium carbonate encrustations in boilers exchangers and heating systems. AZ® 2000 is effective in solving the problem of boiler noise due by the presence of calcium deposits on heat exchangers surfaces. AZ® 2000 is a low environmental impact formulation not containing: phosphates, chromates, amines or nitrItes.
Safety informationFor more information on safety, transportation, storage and handling of AZ® 2000 read the safety data sheet available in our web site.
AZ® 2000
4 Chemical and testing kits
70
Key features Organic residues, oils, cleaners and sludges remover Non-acidic and non-caustic, safe for metallic parts Low environmental impact, non-toxic and bio-degradable
Dosage and feeding The optimal dosage of AZ® 3000 with new plant is of 1 liter per 100 liters of water. AZ® 3000 should be used with warm water at a temperature below 60 ° C. In order to keep the concentration uniform in all parts of the plant is recommended to make the product run (the circulator of the plant is sufficient). Treatment can take a long time ranging from several days to some weeks, depending on the seriousness of the problem. Once treatment is done, rinse the plant and then fill it with AZ® 1000. AZ® 3000 can be introduced directly in the plant by means of the BravoTHERM feeding device, through the vent valve of a radiator into expansion tank of the system, or by a dosing stations.
Do not contain phosphates, chromates, amines or nitrites Available in 1 lt, 3 lt and 25 lt packaging
Text for offer AZ® 3000 is a non-acidic and non-caustic solution suitable to remove organic residues, oils, cleaners and sludges in new heating systems (filled with water for less than six months). AZ® 3000 is a low environmental impact formulation not containing: phosphates, chromates, amines or nitrites.
Safety informationFor more information on safety, transportation, storage and handling of AZ® 3000 read the safety data sheet available in our web site.
Overview
Whenever you install a new system or new equipment, inside circuit may stay process residues and traces of chemicals such as organic oils, cleaners, scales, that if not removed could cause significant problems. AZ® 3000 is a non-acidic and non-caustic treatment ideal for cleaning and preparation of new heating systems installed for less than six months. AZ® 3000 removes organic residues, oils, cleaners and sludges. In addition, AZ® 3000 also helps to prevent corrosion in all metal surfaces, in particular due to the re-deposition of copper. The particular formulation of AZ® 3000, based solely on non-acidic and non-caustic organic compounds, grant a safe use in any plant including those containing aluminum. Furthermore AZ® 3000 does not alter the plastic or elastomeric materials commonly found in plants. AZ® 3000 is a product easy to use, with low environmental impact, not containing amines, nitrites, phosphates and chromates.
CODE PC3001 PC3002 PC3003
STATE LIQUID
COLOUR PALE YELLOW
ODOUR ABSENT
pH (1%) 7.5
DENSITY REL. 1.14-1.18
DOSAGE (lt/100lt) 1 LITER PER 100 LITERS OF SYSTEM WATER
VOLUME (LITERS) 1 3 25
AZ® 3000Cleaner for new heating systems (less than 6 months)
Chemicals for central heating systems
AZ® 3000
71
Key features Organic residues, sludge and rust remover Restore full heat transmission Safe for all metallic parts
Dosage and feeding The optimal dosage of AZ® 4000 with new plant is of 1 liter per 100 liters of water. AZ® 4000 should be used with warm water at a temperature below 60 ° C. In order to keep the concentration uniform in all parts of the plant is recommended to make the product run (the circulator of the plant is sufficient). The treatment can take a long time ranging from several days to some weeks, depending on the seriousness of the problem. Once treatment is done, rinse the plant and then fill it with AZ® 1000. AZ®
4000 can be introduced directly in the plant by means of the BravoTHERM feeding device, through the vent valve of a radiator into expansion tank of the system, or by a dosing stations.
Low environmental impact, non-toxic and bio-degradable Do not contain phosphates, chromates, amines or nitrites Available in 1 lt, 3 lt and 25 lt packaging
Text for offer AZ® 4000 is a non-acidic and non-caustic treatment for removing of sludge corrosion residuals in heating system filled with water from more than six months. AZ® 4000 is a low environmental impact formulation not containing: phosphates, chromates, amines or nitrites.
Safety informationFor more information on safety, transportation, storage and handling of AZ® 4000 read the safety data sheet available in our web site.
Overview
AZ® 4000 is a ready-made non-acidic and non-caustic ideal for cleaning of heating system installed for more than six months. AZ® 4000 removes organic residues, sludge and rust deposits formed during the exercise. AZ® 4000 is able to bring in suspension slurries restoring circulation in radiators. Moreover, AZ® 4000 helps to prevent corrosion in all metal surfaces (acting as passivating). The particular formulation of AZ® 4000, based solely on non-acidic and non-caustic organic compounds, grant a safe use in any plant including those containing aluminum. Furthermore AZ® 4000 does not alter the plastic or elastomeric materials commonly found in plants. AZ®
4000 is a product easy to use, with low environmental impact, not containing amines, nitrites, phosphates and chromates.
AZ® 4000Sludge remover for old heating systems (more than 6 months)
Chemicals for central heating systems
AZ® 4000
CODE PC4001 PC4002 PC4003
STATE LIQUID
COLOUR PALE YELLOW
ODOUR ABSENT
pH (1%) 7.5
DENSITY REL. 1.14-1.18
DOSAGE (lt/100lt) 1 LITER PER 100 LITERS OF SYSTEM WATER
VOLUME (LITERS) 1 3 25
4 Chemical and testing kits
72
Overview
AZ® 5000 is a glicol-based anti-freeze, anti-scaling, corrosion inhibitors and biocides formulated, suitable for all types heating systems, especially for underfloor heating systems. AZ® 5000 keeps in suspension sludge and encrustations, making the removal of them easier in the purge operation. AZ® 5000 contains an antifreeze agent which can provide adequate protection against lower temperatures (the protection temperature depends on the concentration of the product in the plant). The formulation of AZ® 5000 allows a safe usage in any plant including those containing aluminum. AZ® 5000 does not alter the plastic or elastomeric materials commonly found in plants. AZ® 5000 can be used with any type of water, with low or high hardness. AZ® 5000 is a product ready and easy to use, with low environmental impact, not containing amines, nitrites, phosphates and chromates.
AZ® 5000Antifreeze, anti-corrosion, anti-scaling and biocide for underfloor heating systems
CODE PC5002 PC5003
STATE LIQUID
COLOUR TRANSPARENT
ODOUR SLIGHT
pH (1%) 7.5
DENSITY REL. 1.04-1.05
DOSAGE (lt/100lt) See the paragraph “Dosage and use”
VOLUME (liters) 3 25
Chemicals for central heating systems
Key features Multifunctional products Glycol-based Specific for underfloor heating systems Safe for all metallic parts
Dosage and feeding The optimal dose of AZ® 5000 depends on the antifreeze protection required:- 25 liters per 100 lt of water - 7 ° C - 30 liters per 100 lt of water - 12 ° C - 35 liters per 100 lt of water - 15 ° C AZ® 5000 can be introduced directly in the plant by means of the BravoTHERM feeding device, through the vent valve of a radia-tor into expansion tank of the system, or by a dosing stations. The anti-corrosion protection can monitored periodically using the specific kit (cod. 48105002) and the antifreeze protection using the refractometer (cod.48105029). The anti-bacteria protection level can be tested using the BIOCONTROL kit (cod. 48105027) along with its incubator (cod. 48105028). Available in 3 liters and 25 liters tanks.
Low environmental impact, non-toxic and bio-degradable Does not contain phosphates, chromates, amines or nitrites Available in 3 lt and 25 lt packaging
Text for offer AZ® 5000 is a non-acid and non-caustic treatment for underfloor heating systems against corrosion, limescale, fouling and freeze. AZ®5000 is a low environmental impact formulation, not containing phosphates, chromates, amines and nitrites.
Safety informationFor more information on safety, transportation, storage and handling of AZ® 5000 read the safety data sheet available in our web site.
AZ® 5000
73
CODE PC6002 PC6003
STATE LIQUID
COLOUR TRANSPARENT
ODOUR SLIGHT
pH 7.8-8.0
DENSITY REL. 1.25-1.27
DOSAGE (lt/100lt) Fill the system exclusively with AZ® 6000
VOLUME (liters) 3 25
AZ® 6000Antifreeze, anti-corrosion and anti-scaling for solar panel systems
Chemicals for central heating systems
Key features Multifunctional products Glycerin-based Specific for solar panel systems High reserve of alkalinity
Dosage and feeding AZ® 6000 is ready for use and should be used directly for filling plant. Must not be diluted with water, nor must be added other additives. AZ® 6000 provides frost protection down to -15 ° C.AZ® 6000 can be introduced directly into the plant by means of the BravoTHERM feeding device, the PNEUMAX manual pump or BravoSOLAR PUMP, or through the vent valve of a radiator, or the expansion tank system or by a dosing pump. The effective protection can be monitored with the specific kit (cod. 48105022).
Very efficient with high temperature and against stagnation Low environmental impact, non-toxic and bio-degradable Do not contain phosphates, chromates, amines or nitrites Available in 3 lt and 25 lt packaging
Text for offer AZ® 6000 is a glycerin-based solution, containing dispersant agents and corrosion inhibitors for solar panel systems. Ready-to-use product, it must not be diluted with water. Antifreeze protection up to -15 °C. AZ® 6000 is a low environmental impact formulation, not containing phosphates, chromates, amines and nitrites.
Safety informationFor more information on safety, transportation, storage and handling of AZ® 6000 read the safety data sheet available in our web site.
AZ® 6000
Overview
AZ® 6000 is a multifunctional non-toxic antifreeze, anti-corrosive and anti-scaling product based on glycerin, suitable for feeding heating solar systems. It has an high value of reserve of alkalinity, it is stable at high temperatures and effective towards metals commonly found in solar systems (steel, copper, brass, aluminum), limiting corrosion, aging and salt deposits during long periods. Suitable for installations where you can reach high temperatures, with peaks of 200 °C, and to prevent the phenomena caused by stagnation. AZ® 6000 contains special organic dispersants able to maintain slurries in suspension and making it easy to scale removal during the purge operation. AZ® 6000 also contains a non-toxic antifreeze agent. AZ® 6000 does not alter the plastic or elastomeric materials commonly found in plants. AZ®
6000 is ready and easy to use product that should not be diluted, with low environmental impact not contain amines, nitrites, phosphates, chromates.
4 Chemical and testing kits
74
AZ® 7000Cleaner for biological sludge and depositsin underfloor heating systems
Overview
AZ® 7000 is a non-acidic and non-caustic solutions suit-able for cleaning underfloor heating systems in case of fouling due to slimes and biofilms. AZ® 7000 eliminates sludge, organic and biological deposits formed during the low-temperature operation of plants. AZ® 7000 is able to neutralize the biological charge of the plant; its high penetrating power allows to bring in suspention biofilm and sludge, restoring the correct system circu-lation. The particular formulation of AZ® 7000, based solely on non-acidic and non-caustic organic com-pound, allows a safe usage in any plant including those containing aluminum. AZ® 7000 is ready and easy to use, with low environmental impact, not containing amines, nitrites, phosphates and chromates
Chemicals for central heating systems
Key features Multifunctional products Remove bacteria and sludge Specific for underfloor heating systems Non-acidic and non-caustic, safe for user
Dosage and feeding 1 litro di AZ® 7000The optimal dosage of AZ® 7000 with new plant is of 1 liter per 100 liters of water. AZ® 7000 should be used with warm water at a temperature below 60 ° C. In order to keep the concentration uniform in all parts of the plant is recommended to make the product run (the circulator of the plant is sufficient). The treatment can take a long time ranging from several days to some weeks, depending on the seriousness of the problem. Once treatment is done, rinse the plant and then fill it with AZ® 1000. AZ® 7000 can be introduced directly in the plant by means of BravoTHERM feeding device, through the vent valve of a radiator into expansion tank of the system, or by a dosing stations.
Low environmental impact, non-toxic and bio-degradable Do not contain phosphates, chromates, amines or nitrates Available in 1lt, 3 lt and 25 lt packaging
Text for offer AZ® 7000 is suitable for cleaning of low-temperature heating systems, in particular the underfloor heating systems. It is composed of specific biocide agents, which removes and protects from bacteria and sludge.
Safety informationFor more information on safety, transportation, storage and handling of AZ® 7000 read the safety data sheet available in our web site.
AZ® 7000
CODE PC7001 PC7002 PC7003
STATE LIQUID
COLOUR PALE YELLOW
ODOUR SLIGHT
pH 7.5
DENSITY REL. 1.04-1.05
DOSAGE (lt/100lt) 1 liter per 100 liters of system water
VOLUME (LITER) 1 3 25
75
AZ® BIOCLEANNo-oxidizing biocide, antialgae,anti-limescale, antilegionella
Overview
No-oxidizing and no-foaming inhibitor, prevents the development of the organic deposits commonly present in the cooling circuit or operating at low temperatures. Particularly suitable in floor heating radiator panels. AZ® BIOCLEAN also plays an effective anti-corrosive action keeping clean the wet surface, otherwise potentially subject of the development of deposits. AZ® BIOCLEAN is ready and easy to use, with low environmental impact, not containing amines, nitrites, phosphates and chromates.
CODE PC9901 PC9902 PC9903
STATE LIQUID
COLOUR PALE YELLOW
ODOUR CHARACTERISTIC
pH (1%) 7.5
DENSITY REL. 1.14-1.18
DOSAGE (lt/100lt) 1 liter per 100 liters of system water
VOLUME (LITERS) 1 3 25
Key features Protection from algae, bacteria, legionella and funghi Remove bacteria and fungi Specific for underfloor heating systems
Dosage and feeding The optimal dosage is 1 lt per 100 lt of water in the plant. AZ® BIOCLEAN can be added in the system through of use of a proportional dosing stations, or by a constant dosing stations, according to requirements.
Anti-corrosive action Low environmental impact, non-toxic and bio-degradable Available in 1lt, 3 lt and 25 lt packaging
Safety informationFor more information on safety, transportation, storage and handling of AZ® BIOCLEAN read the safety data sheet available in our web site.
Text for offer AZ® BIOCLEAN is a no-oxidizing and no-foaming biocide, prevents the development of algae, bacteria, different strains of legionella, funghi and all the microorganisms commonly present in the cooling circuit or operating at low temperatures. It is a specific product for underfloor heating systems. The product does not alter the chemical characteristics of wastewater.
Chemicals for central heating systems
AZ® BIOCLEAN
4 Chemical and testing kits
76
BC 100Oxidant biocide for drinking water
Biocides
CODE PC052
STATE LIQUID
COLOUR PALE YELLOW
ODOUR HALOGEN
pH 6.8
DOSAGE g/m3 depending on using
TANK WEIGHT Kg 25
Overview
Oxidant product based on sodium hypochlorite 13%, suitable as biocide, oxidizing agent in the process of iron removal, manganese removal and ammonia removal (break-point chlorination). Suitable to be used in drinking water.
BC 100
Text for offer BC 100 is based on sodium hypochlorite and suitable to be used in drinking water. It is suitable as biocide, oxidizing agent in the process of iron removal, manganese removal and ammonia removal (break-point chlorination).
Safety informationFor more information on safety, transportation, storage and handling of BC 100 read the safety data sheet available in our web site.
Dosage and feeding Dosage is depending on the application. BC 100 concentration in the water can be monitored using the appropriate DPD chlo-rine testing kit (code 48105009). BC 100 can be added in the system through proportional dosing stations, or by constant dosing stations, according to requirements.
77
BC 200Oxidant biocide for cold water
Biocides
CODE PC056
STATE LIQUID
COLOUR TRANSPARENT
ODOUR NONE
pH 7.2
CONTINUOUS DOSAGE g/m3 5-10
WEEKLY-SHOCK DOSAGE g/m3 30-80, (on system volume)
DEVICE FOR CONTINUOUS DOSAGE DOSANET P
DEVICE FOR SHOCK MODE DOSAGE DOSANET C+TMR001
MONITORING KIT 48105016
TANK WEIGHT Kg 25
Overview
BC 200 has been developed for biocide treatment of cold water, especially in case of legionella contamination danger, for example on decorative fountains or cooling towers. BC 200 protects from bacteria and micro-organisms proliferation. Its special formula based on hydrogen peroxide and silver ions does not generate toxic or hazardous compounds. BC 200 must be sole dosed, how-ever it is compatible with all the anti-scaling and anti-corrosive products commonly used in water treatment.
BC 200
Text for offer BC 200 is suitable for biocide tratment of cold water, suitable for the biocide treatment in cold water, especially in case of le-gionella contamination danger. BC 200 protects from bacteria and micro-organisms proliferation. BC 200 is compatible with all the anti-scaling and anti-corrosive products commonly used in water treatment.
Safety informationFor more information on safety, transportation, storage and handling of BC 200 read the safety data sheet available in our web site.
Dosage and feeding For continuous use: 5-10 g/m3. Shock weekly: 30-80 g/m3, calculated on the total volume of the plant. The concentration of BC 200 into the water can be monitored using the Peroxide Test Kit (code 48105016). BC 200 can be added in the system through proportional dosing stations, or by constant dosing stations, according to requirements.
4 Chemical and testing kits
78
CODE PC046
STATE LIQUID
COLOUR ROSE
ODOUR HALOGEN
pH 7.2
DOSAGE ppm depending on contamination level
TANK WEIGHT Kg 25
BC 300Oxidant biocide for continuous use
Biocides
Overview
BC 300 is an oxidizing biocide for cooling and humidification cir-cuits; effective for removing biofilm and effective for control of Legionella. It does not be used for drinking water or where there may be contamination of drinking water. Easily checked by a kit.
Text for offer BC 300 is oxidant biocid liquid for cooling systems (continuous use), efficient for legionella control, suitable for hating and cooling industrial circuits.
Safety informationFor more information on safety, transportation, storage and handling of BC 300 read the safety data sheet available in our web site.
Dosage and feeding BC 300 must be used in industrial system, not in drinking water systems. Dosage depending on system characteristics and on biological pollution. A dosage inside 0.5-2.0 ppm range of total residual total halogen ensures the microbiological control of the system. Dose in a point of high mixing, undiluted, in continuous or shock weekly. Available in 25 kg tank.
BC 300
79
PH-METERPocket-size pH meters, able to measure pH in a range from 0.0 to 14.0, with a resolution of 0.1, thermo-compensated reading. The robust watertight external part in ABS makes this device extremely useful for whom needs to operate in high humidity environments. Suitable for applications such as: demineralization, reverse osmosis, water purification.
RIFRACTOMETERRifractometer for measuring the percentage of propylene glycol-based antifreeze (AZ® 5000) with calibrated scale.
CODE48105013
CODE48105029
HARDNESS KIT: For measuring the total hardness (the quantity of calcium and magnesium) of water.
AZ® 1000 KIT: Kit for measuring the protection level of the heating system, where AZ® 1000 chemical is used.
AZ® 5000 KIT: Kit for measuring the protection level of the heating system, where AZ® 5000 chemical is used.
AZ® 6000 KIT: Kit for measuring the protection level of the heating system, where AZ® 1000 chemical is used.
KIT BIOCONTROL: Kit composed of 20 dip slides for monitoring bacteriological covering given by AZ® 5000, AZ® 7000, AZ® BIOCID chemicals.
INCUBATOR: Incubator for kit biocontrol dipslides developing.
CODE48105001
48105002
48105021
48105022
48105027
48105028
Kits and tools for water analisysAnalisys kits
© C
reat
ive
Stud
io s
rl V
eggi
ano-
PD_0
7 20
13
ACQUA BREVETTI 95 s.r.l.ITALY
www.acquabrevetti95.it - [email protected] +39 (0)49 8974006 R
ev. 1