8/6/2019 Programmer TZEBB Setup Instructions

1/4

Instructions for setting up T-ZEBB for your TSO USRID/JOBCARD NamesLast Updated: Mark Carey 06/02/2011 Original Copy

Enter TZEBB on the command line and press .

Enter a 1 on the ZEBB Option Menu Screen

1 = Job - Job Functions Facilityand press .

Enter a 2 on the JOB FUNCTIONS MENU screen 2 = Definition - Browse/Edit/Add Unique Job Definitionsand press .

On the JOB MAINTENANCE screen, put the JOBNAME you want to be associatedwithTZEBB, and press . You will get in the top-right corner Job not defined.

8/6/2019 Programmer TZEBB Setup Instructions

2/4

Leave your JOBNAME entered, but on the Command Line putADD, then press .

Thatmakes the screen function switch from BROWSE mode into ADD mode.

Plug your JOBNAME back in, put SAVE on the Command line, and press .

This then brings up a message in the top-right Data has been saved and somedefault values are automatically plugged in for that new JOBNAME definition.

8/6/2019 Programmer TZEBB Setup Instructions

3/4

Next time you run a test job with that JOBCARD NAME, you will see where TZEBB is

being invoked, and blowing out any NEW,CATLG DSNs within that test job:

14.45.02 JOB48376 ---- THURSDAY, 02 JUN 2011 ----

14.45.02 JOB48376 IRR010I USERID IPNMARK IS ASSIGNED TO THIS JOB.

14.45.02 JOB48376 $HASP971 OS/EM VER 6.1 - JCL CONVERTED BY JES2 ON PRD3

14.45.02 JOB48376 ICH70001I IPNMARK LAST ACCESS AT 14:44:10 ON THURSDAY, JUNE

14.45.02 JOB48376 $HASP373 IPNMARKB STARTED - INIT 4 - CLASS T - SYS PRD314.45.03 JOB48376 TESTE48F01I Maintenance done on TKIID.W.R.MASTER.TEST

14.45.03 JOB48376 TESTE48E03I IPNMARKB production run 00002 gen cycle 00000 beg14.45.03 JOB48376 IEF403I IPNMARKB - STARTED - TIME=14.45.03

14.45.05 JOB48376 - -----TIMINGS (MINS.)--

14.45.05 JOB48376 -STEPNAME PROCSTEP RC EXCP CONN TCB SRB C

14.45.05 JOB48376 -STEP0010 00 541 388 .00 .00

14.45.05 JOB48376 IEF404I IPNMARKB - ENDED - TIME=14.45.05

14.45.05 JOB48376 FEMACT121 IPNMARKB MAXRC=0000 CPU=0.15 ELAPSED=2.92 I/O=541

14.45.05 JOB48376 -IPNMARKB ENDED. NAME-MARK CAREY TOTAL TCB CPU TIM

If you go back into TZEBB and do a 1;1 inquiry for your IPNxxxx*

JOBCARDs/JOBNAMEs:

You should see your new JOBCARD/JOBNAME joining the other JOBNAMEs you had setup previously, or if this is your first time, just that new/first one:

PRD3#2 b Job Statusview

Command ===> SCROLL ===> PAGE

Jobname ===> Selected=0000009 06/02/11

15:17

Primary Commands: Add Sort

Line Commands: JOB -Examine, RSTRT -Restart, ? -List all Line Commands

PF10-Scroll Left PF11-Scroll Right

Line Job Run Job Prod Restart Gen Program Last Executed CondCmd Name Type Status Run Run Cycle Name Stepname/Pstpname Code===============================================================================

IPNMARKA P DONE 00106 $AVRSELR STEPNUM1 SELRSTEP C0000

IPNMARKB P DONE 00002 IEBGENER STEP0010 C0000

IPNMARKH P DONE 00026 $AVRSELR STEPNUM1 SELRSTEP C0000

IPNMARKM P DONE 00014 $AVRSELR STEPNUM1 SELRSTEP C0000IPNMARKS P DONE 02804 $AVRSELR STEPNUM1 SELRSTEP C0000

IPNMARKT P DONE 18517 SAS STEP0010 PROC0010 C0000

IPNMARKX P DONE 01987 SAS STEP0010 PROC0010 C0000

IPNMARKY P DONE 02113 IKJEFT01 PH01LS02 C0000

IPNMARKZ P DONE 00034 $AVRSELR STEPNUM1 SELRSTEP C0000

===============================================================================

8/6/2019 Programmer TZEBB Setup Instructions

4/4

Final Note: Themost common Line Command done with TZEBB, is JFORC.If you dont want to restart/continue your test job from the step

it abended in, just put JFORC on the left, and press ,

Which will return that JOBNAME to a DONE state, clearing

TZEBBs memory of that jobs run-state.