PTC DRIVELINESPTC®
ISO 9001-2015 REGISTERED FIRMCERT No. : IN/17/4015
AN ISO 9001 : 2015 CERTIFIED COMPANY
Vietnam, Thailand, Italy, Germany, Kazakhstan, Dubai, Argentina, USA, Greece, Russia, Argentina Etc.,
are well equipped with Quality Control / Testing facilities and skilled workforce. The raw
materials used are made of High Quality Alloy Steel Forgings, processed at World Quality
Standards, for Product Reliability. Stringent Quality measures are adopted for zero defects. Drive
Shafts are dynamically balanced as per Balance Grade G16 ISO 1940. Our products are OEM Test
Certified.
Self Lubricated Universal Joints • Maintenance ‐free products• No down�me of Equipment for Re‐Lubrica�on• Great advantage to end users & user friendly
Sealed Bearings • Retains Life �me Grease and fully prevents entry of mud/ dust / water into Bearings
• Longer Service Life
Self Locked Bearing cups • No weld strips used to hold opposite cups • No chance of detachment of cups in transit
Exporting countries
Product Quality
Advantages of “PTC” Products
We are a leading Manufacturer of Innovative Maintenance-free Auto Components. We are an ISO 9001:2008 Quality Management System Certified Firm, with an objective of meeting growing demand of Quality spares worldwide, for the requirements of Off - Highway / Earthmoving Equipments in Mining sectors and for Diesel Locomotives. Our Manufactured Products are Trade Mark Registered as “PTC”. The Performance and Quality of PTC products are widely accepted by OEMs and end users.
With over 35 years of R&D Experience in the field of Power Train Systems and Components,Mr. V. CHANDRAMOHAN, C.E.O. contributes his major strength in bringing a wide range of Innovative “Self Lubricated” (Maintenance free) “C” type Universal Joints and Drive Shafts / Cardan Shafts of varied lengths. The Universal Joints are user - friendly, designed for Sealed and Self Locked Bearing cups to arrive at Maintenance - free operation.
e
W
WITH END ADAPTORS WITH SLIP NON SLIP WITH CENTER PLATE
Types of Drive Shafts
WITH SUPPORT BEARING
SERIES
A
B
C
D
E
F
G
H
I
HOLE PITCH
HOLE PITCH
PILOT DIA
BOLT HOLE DIA
BOLT SIZE
TUBE DIA & WALL
THICKNESS
SLIP
TORQUE CAPACITY
T cs [ NM ]
MAX.
OPERATING ANGLE
Application : OFF HIGHWAY VEHICLES
5C
88.90
42.90
115.06
10.5
3/8"‐24 UNF
Ø
73 x 7.0
80
5650
30°
6C
114.30
42.90
140.46
10.5
3/8"‐24 UNF
Ø
73 x 7.0
80
7230
30°
7C
117.48
49.20
148.38
13.5
1/2"‐20UNF
Ø
89 x 7.6
102
10700
30°
8C
174.60
49.20
206.32
13.5
1/2"‐20UNF
Ø
89 x 7.6
102
15500
30°
8.5C
123.83
71.44
165.1
13.5
1/2"‐20UNF
Ø114.3 x 13.5
102
20300
30°
9C
168.25
71.44
209.52
13.5
1/2"‐20UNF
Ø114.3 x 13.5
& Ø127x 12
102 / 127
27400
30°
9.5C
168.25
71.44
209.52
13.5
1/2"‐20UNF
Ø114.3 x 13.5
& Ø127x 12
102 / 127
27400
30°
10C
165.10
92.10
212.7
15.0/17.0
M14x1.5 /
5/8”‐
18UNF
Ø141.3 x 12.7
80 / 102
39700
30°
10.5C
172.72
88.90
222.17
17.0
5/8”‐18UNF
Ø141.3 x 12.7 80 / 102
39700
30°
11C
172.72
88.90
222.17
21.0
M20 x 2.5
Ø141.3 x 12.7 80 / 102
41600
30°
12C
241.35
92.10
288.9
15.0
M14 x 1.5
Ø141.3 x 12.7 80 / 102
62200
30°
14C
270.00
134.88
338.8
19.0
M18 x 1.5
Ø219.1 x 15.1
127 / 150
120600 30°
14.5C
252.00
107.00
310.00
23.0
M22 x 1.5
Ø168.3x18.3
127 108200
30°
15C
199.94
99.98
259.58
21.0
M20 x 2.5
Ø168.3x18.3
127 75400
30°
Application : FOR LOCOMOTIVES & INDUSTRIAL
LIGHT 168.25 71.44 209.52 13.5 1/2"‐20UNF Ø114.3 x 13.5 & Ø127x 12
102 / 127 27400 30°
MEDIUM 172.7 88.9 222.17 17.0 5/8”‐18UNF Ø141.3 x 12.7 80 / 102 39700 30°
HEAVY 205 104 272.9 25.0 M24 x 1.5 Ø168.3x18.3 125 75400 30°
Product RangeProduct Range
PTC “C” type “Universal Joints” are conforming to International Standards to ensure Fitment, for the Joints
sizes 5C ,6C ,7C,8C, 8.5C, 9C, 9.5C, 10C, 10.5C, 11C, 12C, 14C, 14.5C, 15C, W12, W18 and W38
5C 88.90 42.90 115.06 3/8"‐24 UNF Ø 73 x 7.0 80 5650 30°
6C
114.30
42.90
140.46
3/8"‐24 UNF
Ø
73 x 7.0
80
7230
30°
7C
117.48
49.20
148.38
1/2"‐20UNF
Ø
89 x 7.6
102
10700
30°
8C
174.60
49.20
206.32
1/2"‐20UNF/
Ø
89 x 7.6
102
15500
30°
8.5C
123.83
71.44
165.1
1/2"‐20UNF
Ø114.3 x 13.5
102
20300
30°
9C
168.25
71.44
209.52
1/2"‐20UNF
Ø114.3 x 13.5
/ Ø127x 12
102 / 127
27400
30°
9.5C
168.25
71.44
209.52
1/2"‐20UNF
Ø114.3 x 13.5
/ Ø127x 12
102 / 127
32880
30°
10C
165.10
92.10
212.7
M14x1.5 /
5/8”‐
18UNF
Ø127 x 12
80 / 102
39700
30°
10.5C
172.72
88.90
222.17
5/8”‐18UNF
Ø127 x 12
80 / 102
41600
30°
11C
172.72
88.90
222.17
M20 x 2.5
Ø141.3 x 12.7
80 / 102
41600
30°
12C
241.35
92.10
288.9
M14 x 1.5
Ø141.3 x 12.7
80 / 102
62200
30°
14C
270.00
134.88
338.8
M18 x 1.5
Ø219.1 x 15.1
127 / 150
120600
30°
14.5C
252.00
107.00
310.00
M22 x 1.5
Ø168.3x18.3
127
108200
30°
15C
199.94
99.98
259.58
M20 x 2.5
Ø168.3x18.3
127
75400
30°
& Ø127x 12 127
HEAVY 205 104 272.9 M24 x 1.5 Ø168.3x18.3 125 75400 30°
M12 x 1.75
M12 x 1.75
SERIESHOLE PITCH
HOLE PITCH
PILOT DIA
BOLT SIZETUBE DIA &
WALL THICKNESS
SLIPTORQUE
CAPACITYT cs [ NM ]
MAX.
OPERATING ANGLE
LIGHT 168.25 71.44 209.52 1/2"‐20UNF 114.3 x 13.5/ 102 / 27400 30°
MEDIUM 172.7 88.9 222.17 5/8”‐18UNF Ø141.3 x 12.7 80 / 102 39700 30°
Ø
Application : FOR LOCOMOTIVES & INDUSTRIAL
Application : OFF HIGHWAY VEHICLES
A B E F G H IC
A
B
Product List of SPIDER ASSLYS / CROSS & BRGS /UNIVERSAL JOINTS
S.No. Equipment Model Spider Assy
1 Komatsu HD 785-7 Front 561-20-71100 / 562-20-31101 1001
2 Komatsu HD 785-7/WA800-3 / Rear 42C-20-12621/562-20-32100/ 1002 WA900-3/ WA1200-3 42C-20-12620
3 Komatsu HD 785-5 Front 561-20-61100 1040
4 Komatsu HD 785-5 Rear 561-20-62100 1041
5 Komatsu HD785-2 Front 562-20-11100 /281-20-12201 1012
6 Komatsu HD 785-2 Rear 561-20-12102 / 568-20-12103 1013
7 Komatsu HD 465-7, 7R, 7EO , WA450-6, Front 421-20-32621 1010 WA470-5, WA470-6, WA480-5, WA480-6
8 Komatsu HD 465-7, 7R, 7EO/ WA700-1 , Rear 428-20-12620 1011
9 Komatsu HD 325-6,7R Front 569-20-61100 / 569-20-61109 1037
10 Komatsu HD 325-6,7R Rear 569-20-62100 1038
11 Komatsu HM 400–2R - 56B-20-13910 1042
12 Komatsu HD 400- 2R _ 56B-20-11910 1045
13 Komatsu HD 400 - 2R _ 56B-20-12910 1046
14 Komatsu HD 400 - 2R _ 56B-20-15910 1047
15 BEML BH100 Front 953-PI-11027 /953-PD-10099 1003
16 BEML BH100 Rear 953-PI-11043 /953-PD-02103 1004
17 BEML BH85 Front 985-UJ-03016 1012
18 BEML BH85 Rear 985-PZ-03018 / 985-PZ-03026 1066
19 BEML BH50M/BH60/210M/BH35 Front 955-EI-03082 / VJ4057 / 56620102000/VE8331/ TV1499 1005
20 BEML BH50M / 210M / BH60 Rear 955-EI-03058/955-EI- 03033/ 1006 955-EI-03017/VE8333
21 BEML BH40 Front 778-PI-02053 1026
22 BEML BH40 Rear 778-PI-02078 1027
23 BEML BH35-2 Main 787-PI-03081 / 787-PI-03147 / 955-EI-03058
24 CAT 773 Main 9V7710 / 173-0889/172-7634/ 8W9912 1007
25 CAT 777 C / 777D Main 1060933/2G4157/172-5232/ 172-5235 / 8P8132 / 8W9435 / 2G4080 1008
26 CAT 785 Main 8X0432 1009
27 HM 1035 Front & Rear 81805356 / 81019082 1019
28 HM 2021/Terex 72-21B Loader Front & Rear 81804335/ 9033903/ 9033904 1021
29 Komatsu / BEML D 50 Dozer Main 131-10-46110 1015
30 Komatsu / BEML D155A1 Dozer Main 175-20-00060 1016
31 Komatsu/BEML D355 Dozer Main 195-20-11100 1017
32 Komatsu/BEML D475 Dozer Main 135-UJ-03018 1018
33 BEML BG 825 Grader Main 452-PZ-02029 / 235-20-11110 1022
34 Volvo G990 /G930 Grader Engine-Trans VOE12731894/ VOE12731895 1023
35 Volvo G930 Grader Engine-Trans VOE12731893 1024
36 Volvo G990 /G930 Grader Trans Output VOE12742792/ VOE12731896 1025
37 Komatsu WA 500-3 Wheel Loader Engine-Trans 425-20-11620 1028
38 Komatsu WA500-3 Wheel Loader Trans output 421-20-12620 1029
38 Komatsu WA600-6R Wheel Loader Engine-Trans 425-20-32610 1030
39 Komatsu WA600-6R Wheel Loader Trans output 426-20-32620/56B-20-13910 1031
40 Komatsu WA600-3R Wheel Loader Trans output 426-20-12620 /426-20-14620/426-20-13640 1032
41 Locomotives Engine - Trans 460-02-030 / 04S0035 1034
42 Locomotives Trans - Axle 460-02-010 / 04S0034 1035
43 Locomotives Axle - Axle 460-02-020 / 04S0046 1036
Location PTC P.No.
Note : The OE Part Numbers shown are only for reference
Product List of DRIVE SHAFTS/ CARDAN SHAFTS/PROPELLER SHAFTSS.
No. Description Drive Shaft ( Part No. - Ref.)Location PTC P.No.
Note : The OE Part Numbers shown are only for reference
LIST OF H.T. FASTENERS
S.No. Description OE Part No. PTC P.No.Location
LIST OF FLANGE
S.No. Application OE Part No. / Description PTC P.No.Location
1 BH100 Trans Output 985-TM-51859 5001
2. BH100 Trans Input 953-TC-52029 5002
3 CAT 35T Dumpers PTO Flange 81020097 5003
4 CAT 35T Dumpers Trans Input Flange 81020098 5004
5 CAT 35T Dumpers Trans Output Flange 81019068 5005
6 CAT 35T Dumpers Differential Flange 81019351 5006
7 Sandvik LDPT Tramsmission out Yoke 4697492 5007
8 Sandvik LDPT Engine Output 4697595 5008
9 Sandvik LDPT Front & Rear axle 69040380 5009
10 Sandvik LDPT Transmission Input 4697495 5010
1 Komatsu HD465-7R, HD785-7 Wheel Bolt Front & Rear 569-22-72850 3001
2 Komatsu HD465-7R, HD785-7 Wheel Bolt Front & Rear 569-22-72860 3002
3 Komatsu HD465-7R, HD785-7 Wheel Nut Front & Rear 569-22-72870 3003
4 Komatsu HD465-7R, HD785-7 Washer Front & Rear 569-22-72840 3021
5 Beml 50T / 60T Dumpers Bolt Rear / Front 955-EI-11206 /566201000100 / VE7879 /VE8334 3004
6 HM /CAT 773 Dumpers Bolt Main 81024040 / 9V3811 3005
7 BEML 35T Bolt Main TR7419 3004
8 BH100 – Bolt Rear Driveline Bolt 953-PZ-11142 3009
9 CAT 777 Bolt Main Driveline Bolt 8B5144 / 0S2318 3010
10 HD465-7R / HD 325-6 Front Driveline Bolt 421-20-12690 / 566-20-41220 3011
11 HD465-7R- Bolt / HD 325-6 Front Driveline Bolt 01050-61260 / 569-20-61810 3012
12 HD465-7R Bolt / HD 325-6 Rear Driveline Bolt 428-20-12690 281-20-12320 3013 /
13 HD465-7R Bolt / HD 325-6 Rear Driveline Bolt 01050-61470 / 510-20-12820 3014
14 HD785-7 Bolt Front Driveline Bolt 562-20-31801 3015
15 HD785-7 Bolt Front Driveline Bolt 01010-62085 3016
16 HD785-7 Bolt Rear Driveline Bolt 42C-20-12690 3017
17 HD785-7 Bolt Rear Driveline Bolt 01050-61895 3018
18 BH60 Rear Stud TX 4163 3024
19. BH60 Front Stud WA 4633 3025
20. BH60 Nut TW 1745 3026
21. Komatsu HM 400-2R - 426-20-21550 / 426-20-21610 3027
22. Komatsu HM 400-2R - 426-20-21550 / 426-20-21610 3028
23. Komatsu HD 785-5 Front 426-20-12690 3029
24. Komatsu HD 785-5 Rear 510-20-12811 3030
25. Komatsu HD 785-5 Rear 510-20-12820 3031
26. Komatsu HD 785-2 Front & Rear 510-20-12810 3032
27. Komatsu HD 785-2 Front & Rear 561-20-11810 3033
Note : The OE Part Numbers shown are only for reference
1. UNIVERSAL JOINTS :
B
A
C
For your requirement of “C” Type Uniersal
Joint, the following Input data’s are required,
as in Fig 1.1
1. Parrallel Pitch Distance A = ____________
2. Across Pitch Distance B = ____________
3. Hole Diameter C = ____________
2. DRIVELINES :
2.1. DRIVELINE (WHEN LYING ON TABLE)
Fig: 1.1
2.2 DRIVELINE WHEN FITTED ON VEHICLE
Fig: 2.2
1.1. “C” TYPE UNVIERSAL JOINT
For your requirement of “Driveline” the
following input data are required, as in fig 2.1
1. Fully Compressed Length A = ____________
without Crosses
2. Parrallel Pitch Distance B = ____________
3. Across Pitch Distance C = ____________
4. Hole Diameter D = ____________
When Driveline is fitted on a vehicle measure
the distance “A” length between input and
output flange surfaces (A) as in fig 2.2
Installed Length A = ____________
CUSTOMER ENQUIRY / REQUIREMENT IDENTIFICATION
Fig: 2.1
FULLY COMPRESSED LENGTH = A B
C
D
PTC PRODUCTS
PTC DRIVELINES TEL : +91-44-2225 1838T.Fax : +91-44-2225 1838(Mob) : +91-94440 83462E MAIL: [email protected] [email protected] : www.ptcdrivelines.com
Video : www.ptcdrivelines.com/video.html
PTC®
No.37-A, MUTHURAMALINGAM STREET,
EKKATTUTHANGAL, GUINDY, CHENNAI - 600 032, (TN) INDIA.